Installing OBIEE on Windows 7, quick questions
Dear Experts,
Last year, I struggled installing OBIEE on Linux 5.5.
Now I want to install it on Windows 7 Ultimate.
It will be stand alone, for my own use only.
Both a client, and a server.
Some quick questions:
1)
Does the Windows server need to have a Domain (as Linux did)?
(I'm having some trouble with the same dummy domain that worked fine
in Linux, since it doesn't exist on the web.)
2)
Does the Windows server/client require a loopback adapter?
If so, does it require a static IP?
3)
Does the windows server/client require a static IP address?
4)
If static IP addresses are required for both 2 and 3,
is the static IP address supposed to match, or be different?
I hope these questions aren't too dumb. But I haven't found
anything online addressing them for windows yet.
Thanks a lot!
Hi,
1)
Does the Windows server need to have a Domain (as Linux did)?
(I'm having some trouble with the same dummy domain that worked fine
in Linux, since it doesn't exist on the web.)
A. Not required.
2)
Does the Windows server/client require a loopback adapter?
If so, does it require a static IP?
A. Yes it is require for Loopback adapter and static ip for installation -- Client installation is not required -- You can go for Simple installation in your laptop.
3)
Does the windows server/client require a static IP address?
A. Yes
4)
If static IP addresses are required for both 2 and 3,
is the static IP address supposed to match, or be different?
A.
Please refer my blog.
http://satyaobieesolutions.blogspot.in/2012/06/obiee-11.html
Please verify the below steps.
1. Please check whether are download 64 bit software or not.
2. First you have to install jrockit-jdk1.6.0_31-r28.2.3-4.1.0
3. before installing software you have to give full permissions to everyone on your installation location drive (C drive or D drive).
4.Create Looppack Adapter.
5. Database installation 11g 64 bit.
6. RCU 32 bit
7. OBIEE 11.1.1.6 64 bit
Hope this help's
Thanks,
Satya
Similar Messages
-
Unable to Install OBIEE on Windows 2008 Server R2
I am Unable to Install OBIEE on Windows 2008 Server R2. It is giving the error
Oracle Business Intelligence is not supported on this Windows version. Oracle Business Intelligence is only supported on Windows XP x86, Windows 2003 x86, Windows 2003 AMD64, Windows 2003 EM64T, Windows Vista x86, Windows Vista AMD64, Windows Vista EM64T, and Windows 2000 x86.
But is there any patch to install the OBIEE on Windows 2008 Server R2Hi Sk
I think it might be due to compatible issue.So check the properties of the install.exe file and change the compatability to windowsxp or windows 2003 ,then try to install .I think its going to work.Because i installed OBIEE10.1.3.4 on windows server 2008.
Regards
Sandy -
Unable to Install OBIEE in windows 7 32 bit
hi,
i am aware that windows 7 is not supported for OBIEE 10g but from one of the blog they said to change the compatibity version to xp and have done the same but i am gettting some error while running the setup.exe file . the error is as folllows
the installer is unablle to run in graphical mode. try running the installer with the -console or -client flag.
can anyone help how to solve this issue. even i have changed the grphical mode of AEROin windws as suggested in some of the blog but still i am recieving the same error.
regards,
chandrasekharHi,
Try changing the compatibility mode to Vista SP2 and run.
Ref: Not able to install OBIEE 10g
Thanks
Kiran -
Installing OBIEE on windows xp home
I want to get the tool formerly known as Siebel Analytics.....gathered i have to install OBIEE first....this I tried to do, downloading from edelivery.oracle.com
..But i get an error....wasn't sure if OBIEE can run on windows xp home....a friend did say it can...
can someone help me out...
thanks...If you just want to install it on XP to familiarize yourself with the functionality in OBIEE, don't bother with Apache (or IIS). Select the "Basic" installation option when prompted on one of the first installation screens. This will create a very simple self contained OBIEE environment for you and you should be up and running within 30 minutes. For development purposes, we have installed OBIEE inside a VM (on XP) using the basic install and found this to be a very workable solution.
-
Error While Installing OBIEE in windows 7
Hi all,
I am trying to Install OBIEE 11 g in my Local machine .
i have 13 GB Free space as of now and i have done the first 2 steps like ..
1. Successfully installed Oracle Database XE
2. Successfully installed RCU with the component Metadata services and business intelligence Platform
step 3 is my problem.... when i start the Setup.exe file from my disk1 folder i am getting the Oracle business intelligence 11 g Installer screen.. then the installation still in the same screen even after 2 hours with the red progress bar and a message like "Generating sequence for page:prereqscreen")
can some assist me how to finish my installation
Thanks
AnneshI think you need to download oracle software again...
Oracle Universal Installer - Could not find main class -
Error when Installing OBIEE on Windows 2008 r2
Hi all
When Install Oracle BI 10.1.3.4.2 on Windows Server 2008 r2 x64I have several errors in install log:
(Aug 13, 2013 8:52:46 AM), Install.product.install, com.siebel.analytics.install.ExecWizardActionCustom, err, com.installshield.util.ProcessExecException: CreateProcess: G:\BI\OracleBI\server\Bin\installperfsas.bat error=2
STACK_TRACE: 7
com.installshield.util.ProcessExecException: CreateProcess: G:\BI\OracleBI\server\Bin\installperfsas.bat error=2
at com.installshield.util.ProcessExec.executeProcess(ProcessExec.java:180)
at com.installshield.wizardx.actions.ExecWizardAction.executeProcess(ExecWizardAction.java:412)
at com.installshield.wizardx.actions.ExecWizardAction.run(ExecWizardAction.java:457)
at com.siebel.analytics.install.ExecWizardActionCustom.run(ExecWizardActionCustom.java:79)
at java.lang.Thread.run(Unknown Source)
(Aug 13, 2013 8:52:47 AM), Install.product.install, com.siebel.analytics.install.ExecWizardActionCustom, err, com.installshield.util.ProcessExecException: CreateProcess: G:\BI\OracleBI\web\bin\installperfsaw.bat error=2
STACK_TRACE: 7
com.installshield.util.ProcessExecException: CreateProcess: G:\BI\OracleBI\web\bin\installperfsaw.bat error=2
at com.installshield.util.ProcessExec.executeProcess(ProcessExec.java:180)
at com.installshield.wizardx.actions.ExecWizardAction.executeProcess(ExecWizardAction.java:412)
at com.installshield.wizardx.actions.ExecWizardAction.run(ExecWizardAction.java:457)
at com.siebel.analytics.install.ExecWizardActionCustom.run(ExecWizardActionCustom.java:79)
at java.lang.Thread.run(Unknown Source)
(Aug 13, 2013 8:52:47 AM), Install.product.install, com.siebel.analytics.install.ExecWizardActionCustom, err, com.installshield.util.ProcessExecException: CreateProcess: G:\BI\OracleBI\oc4j_bi\bin\oc4j.cmd -start error=2
STACK_TRACE: 7
com.installshield.util.ProcessExecException: CreateProcess: G:\BI\OracleBI\oc4j_bi\bin\oc4j.cmd -start error=2
at com.installshield.util.ProcessExec.executeProcess(ProcessExec.java:180)
at com.installshield.wizardx.actions.ExecWizardAction.executeProcess(ExecWizardAction.java:412)
at com.installshield.wizardx.actions.ExecWizardAction.run(ExecWizardAction.java:457)
at com.siebel.analytics.install.ExecWizardActionCustom.run(ExecWizardActionCustom.java:79)
at java.lang.Thread.run(Unknown Source)
I found several discussions on this, but there was no solution.
JVM - jdk1.6.0_37 and it works fine. Tried to use x86 and x64 jdk. No reason.
I tried to install "as administrator", but it did not worked. Copy the install folder to the C:\, run with comtatibility with Windows7 and got the same error.
I install the same OBIEE on other servers and it was no problem to install.
Please HEEEELPHi Agha,
Yes, You can install a Windows 2008 Enterprise R2 machine as additional domain controller along with Windows server 2008 Enterprise SP2 DC's. There will not be any issues.
Before you add a domain controller that is running Windows Server 2008 R2 to an Active Directory forest run Adprep.exe from the Windows Server 2008 R2 media on your existing domain controllers to prepare your domain and forest.
http://technet.microsoft.com/en-us/library/dd379511(v=ws.10).aspx
Regards,
Rafic
If you found this post helpful, please give it a "Helpful" vote.
If it answered your question, remember to mark it as an "Answer".
This posting is provided "AS IS" with no warranties and confers no rights! Always test ANY suggestion in a test environment before implementing! -
Cisco Unified TAPI TSP Client Windows 7 quick question
http://www.cisco.com/en/US/customer/prod/collateral/voicesw/ps6789/ps7046/ps7282/product_bulletin_c25-563280_ps556_Products_Bulletin.html
Inside of the product bulletin for the release of the CUCM products for Windows 7 it lists:
Cisco Unified TAPI TSP Client (including Wave Driver)
Version 8.5(1), FCS Q4CY10
• WoW64 - Not applicable
• Native 64 - Target FCS Q4CY10
My question is this - the 'Version 8.5(1)" is that the version of CUCM that I will have to upgrade too? Or is there a TAPI TSP download seperate from the Call Manager upgrades? I am currently on 7.1.x
Silly question I know...but trying to find the answer.Hello,
so does it mean: There is NO WAY to make a TAPI/TSP Service Provider 8.6(2.4) work with CallManager 7.x? I have a Win7 64bit system here, but the CallManager still ist on 7.x.
Kind Regards,
Olaf -
Install OBIEE,Informatica,DAC,BI APPS on windows
hi,
I want to install OBIEE on windows with following components
OBIEE 10g
DATABASE 10g
INFORMATICA 8.6.1
DAC 10
BI APPS 7.9.6.
Oracle Documentation for installation & configuration is too complicated...
Can anyone provide installation & configuration steps with snapshot.
Edited by: user7374017 on Nov 26, 2010 3:35 PMYou can download it and install it.
Below what I have done to install it:
http://gerardnico.com/wiki/ebs/installation
You don't need the software then you can only install the database instance with the visio sample data.
Cheers
Nico -
OBIEE 11g install failed on Windows 7 - 64 bit
I am trying to install OBIEE 11g in my Windows 7 - 64 bit laptop.
It is failing during configuration at the step
Starting Managed Server: bi_server1
The log file is showing following error ....
Starting Managed Server : bi_server1
In public start
ASWLServer.start ...
LOADING DLL : C:\FusionMW\Oracle_BI1\install\config\\StartUtil64.dll
getDomainRuntimeMBeanServerConnection ...
Connecting to Domain runtime ...
trying to connect to vikas-PC 7001
Successfully connected to the Domain Runtime ...
getDomainRuntimeMBeanServerConnection ...
Connecting to Domain runtime ...
trying to connect to vikas-PC 7001
Successfully connected to the Domain Runtime ...
oracle.as.provisioning.exception.ASProvisioningException
at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:872)
at oracle.as.install.bi.biconfig.standard.StandardWorkFlowExecutor.executeHelper(StandardWorkFlowExecutor.java:31)
at oracle.as.install.bi.biconfig.standard.StartStopManagedServer.doExecute(StartStopManagedServer.java:56)
at oracle.as.install.bi.biconfig.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:79)
at oracle.as.install.bi.biconfig.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:61)
at oracle.as.install.bi.biconfig.BIConfigMain.doExecute(BIConfigMain.java:110)
at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:335)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:87)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:104)
at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:63)
at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:158)
at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:83)
at java.lang.Thread.run(Thread.java:619)
Caused by: oracle.as.provisioning.exception.ASProvWorkflowException
at oracle.as.provisioning.weblogic.ASWLServer._start(ASWLServer.java:1196)
at oracle.as.provisioning.weblogic.ASWLServer.start(ASWLServer.java:999)
at oracle.as.provisioning.engine.WorkFlowExecutor._startStopServersAndApps(WorkFlowExecutor.java:815)
at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:484)
at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
... 14 more
Please help
Thanks in advance,
Vikas AgarwalGreetings Vikas.
Dou you solve this issue?
I got the exact same message but setting the second node of a Forms 11.1.2.1 Installation. But the message I got is the same that you have:
Successfully connected to the Domain Runtime ...
oracle.as.provisioning.exception.ASProvisioningException
at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:872)
at oracle.as.install.classic.ca.standard.StandardWorkFlowExecutor.execute(StandardWorkFlowExecutor.java:65)
at oracle.as.install.classic.ca.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:26)
at oracle.as.install.classic.ca.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:61)
at oracle.as.install.classic.ca.ClassicConfigMain.doExecute(ClassicConfigMain.java:124)
at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:371)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:88)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:105)
at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:64)
at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:160)
at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:86)
at java.lang.Thread.run(Thread.java:662)
Caused by: oracle.as.provisioning.exception.ASProvWorkflowException
at oracle.as.provisioning.weblogic.ASWLServer._start(ASWLServer.java:1196)
at oracle.as.provisioning.weblogic.ASWLServer.start(ASWLServer.java:999)
at oracle.as.provisioning.engine.WorkFlowExecutor._startStopServersAndApps(WorkFlowExecutor.java:814)
at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:483)
at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
... 13 more -
OBIEE 11g installation failing on step 13 "Executing: opmnctl start coreapplication_obips1 failed".
I've installed a loopback adapter with IP 10.10.10.10 and subnet mask 255.255.255.0 and other entries blank. my Host file entries are like this:
127.0.0.1 localhost
10.10.10.10 L911093.corp.abcd.com L911093
I've used 192.168.100.100 IP for loopback adapter but the same problem is coming.
Thanks in advanceHi,
try to start manually by using opmnctl command...it shoud work if its not working try below steps
Method:1
While installing obiee11g keep it OPMN service type as "Manual" then install and confure it should work.
Method:2
Some installation issues can be caused by this known issue with your Windows configuration. Please review the OBI EE 11g Release Notes document : -
Section 53.2.8 Oracle BI Installer Stops at Administrator User Details Screen
configure a loopback adapter :
http://download.oracle.com/docs/cd/E14571_01/relnotes.1111/e10132/biee.htm#CACEFIAG
Refer for more:
Error: "Executing Opmnctl Start Coreapplication_obiccs1 Failed" When Installing OBIEE 11g [ID 1211149.1]
Thanks
Deva -
HI..
I'm having an issue while installing obiee 11g(11.1.1.7.0) in windows server 2012 and using the database as ms sql server 2008. During configuration process after the installation process is completed , here the process is stopped at "Step:executing opmnctl start configuration_obisch1" status "failed"
Here is the error:
Error
opmnctl task failed
Step Executing: opmnctl start coreapplication_obisch1 failed
Configuration Action "Executing opmnctl start coreapplication_obisch1 " has failed. please check log files...
any help would be great
thanks..Friend,
Installer file size is:
Size: *1.23 GB (1,323,085,837 bytes).*
Size on disk: *1.23 GB (1,323,089,920 bytes).*
I tested also disabling antivirus on my PC and disconnect the power cord before starting the installation of JDeveloper. In both tests the result was the same.
Some additional recommendations to solve this case.
Thank you for supporting.
Edited by: Luis_vkacito on Nov 15, 2012 6:48 AM -
OBIEE install problem on Windows 2008 R2 64bit server
Hi!
I have for 1 month struggled with a OBIEE 11g install on a Windows 2008 R2 64 bit server. (I have a open SR at Oracle but have not got any answer/suggestion for 2 weeks)
I follow these documentations:
Oracle® Fusion Middleware
Installation Guide for Oracle Business Intelligence
11g Release 1 (11.1.1)
E10539-01
and
http://download.oracle.com/docs/cd/E14571_01/bi.1111/e10539/c4_installing.htm#CIHDJGIH
Specially chapter 4.4.4 for the moment, cant get pass step "Specify Installation Location"
First did I run RCU against our Oracle 11g database and created the schemas for BI Publisher
Then did I install JRockIT - jrockit-jdk1.6.0_26-R28.1.4-4.0.1-windows-x64.exe
Then from JRockIT installed WLS_1035 generic.
Then configure AdminServer so thatone is up and running (even installed a HTML server from E1 to check if WLS is up and running and working)
Then start the installer (Oracle Business Intelligence, v. 11.1.1.5.0, for Microsoft Windows x86-64-bit) disk 1, setup.exe, then must I choose "software only" install. But on step 3 och 9 can I not press next, the installer says that I do not have any "Application Server" running. I have installed on E:\Oracle\Middleware but the installer can not see any application there, but I can access it thru a browser.
Tests I have done,
Install loopback adapter
Deinstall loopback
Deactivated everything but IPV4 protocoll (we have also IPV6 on all server).
Verified that we have static ip on the server
Tried installer for BIP (OBIEE) with WLS AdminServer running and without have it running.
And checked the installer logs everytime, no errors, no warning.
Is there anyone how can guide me or give some tips? I am getting frustrated after 4 weeks without success.
Best regards,
AndersHi!
It is the installer who not working properly, when using the "Browse", I had to choose a comletly wrong place first, and then again choose the correct installation path, after that would the understand where I wanted to install.
Best regards,
Anders -
Installing obiee 11.1.1.6.0 on Windows 7 Professional
I have run into a unique problem:
When I execute setup.exe to run OBIEE from ~/bishiphome\Disk1\install\win64, I get
Oracle Universal Installer
Starting Oracle Universal Installer ....
Checking swap space: must be greater than 500 MB Actual 10891 MB
Checking monitor: .......Passed
Preparing to launch Oracle Universal Installer from c:\Users\...... Please wait
Thats it! The OBIEE Installer never pops up.
Has anyone run into this issue? Can you share how you resolved it?
I have looked at:
http://obieeelegant.blogspot.com/2012/07/obiee111160-software-only-installation.html
System
Manufacturer Dell
Model Inspiron 5520
Process Intel Core i5-3210M
RAM 8.00 GB
System type 64 bit OSHI User,
Please refer the below link.
http://satyaobieesolutions.blogspot.in/2012/06/obiee-11.html
Please verify the below steps.
1. Please check whether are download 64 bit softwares or not.
2. First you have to install jrockit-jdk1.6.0_31-r28.2.3-4.1.0
3. before installing where you install the software system drive means(C or D drive) give full permission to Everyone .
4.Create Looppack Adapter.
5. Database installation 11g 64 bit.
6. RCU 32 bit
7. OBIEE 11.1.1.6 64 bit
you can install successfully obiee 11g windows 7 64 bit.
I have installed successfully in my laptop 64 bit.
Hope this help's
Thanks,
Satya -
Problems installing OBIEE 11g on Windows Server 2008 64 bit
Hi, I'm trying to install OBIEE 11g on Windows Server 2008 64 bit (standard edition, SP2), and it's blowing up running the installer. The installer gets past the first couple of "info" screens, but blows up prior to coming to the first "real" screen with an error:
Microsoft Visual C++ Assertion Failed:
Program: ...
File: ../../../src/share/native/sun/font/t2k/t2kstrm.c
Line: 132
Expression: pos <= t->maxPos
Has anyone seen this and/or have an idea how to work around this? Note that I did do the prerequisite download / install of the 2005 Visual C++ 64 bit libraries.
Thanks,
ScottJust to close the loop on this thread, this does indeed seem to be some sort of font / java issue on our servers. I've been completely unable to get the install to work using the GUI. However, if I run it from command line using the -silent and -response paramaters along with a proper response file, the install went perfectly. I'm going to continue working the SR with Oracle - don't want to be stuck using -silent mode when things get more complicated, but at least now I can move forward.
If anyone else has a better workaround - please let me know. "Silent" mode is workable, but difficult and time consuming.
Thanks,
Scott -
hey guys, i just have a quick question about my itunes
i have my music arranged by date added, which is very important
this is how i have it:
what i want to know is: is there a way to install the new OS, and somehow keep the music in the order that it is right now?
thanks a lot!!!! ----arthurYou'll probably get more help at the iTunes forum.
http://discussions.apple.com/forum.jspa?forumID=789
Maybe you are looking for
-
Switching iPhone from PC to Mac, from one computer to another??
I just got my iPhone. Haven't activated it yet, b/c I also ordered a Macbook Pro. Should I wait until the Macbook comes to activate my iPhone? Or can I just activate it using my PC, and then switch it over to the Macbook? I know that you cant do that
-
How to change COMPATIBLE with a physical standby database?
Hello. The obvious answer is do it on both the primary and the standby at the same time... since the reference manual says : "When using a standby database, this parameter must have the same value on both the primary and standby databases.". However,
-
All, How do I make a sql statement prompt for a value on unix using the '&' parameter? When I run the following section (on HP Unix), the statement goes right through without prompting the user. Thanks as Always A/A Code sqlplus username/password <<-
-
Mynumber displayed as unknown.
I have an iphone 4 on ios 6.1.3, my number is not displayed in the contacts list and in settings>phone it shows unknown number. Because of this I cannot activate facetime and imessage. is there anyway to solve this problem? I really appreciate your h
-
Any way to increase font size in RoboHelp UI?
Hi. Is there any way to increase the font size of the text in the RoboHelp (11) UI itself, that is, for example, the items that appear in the Project manager, Topic List, Single Source Layouts, and other panels? I have my monitor set to optimal resol