Installing ODAC.Exe Problem - Please Help!

Greetings!
This is the scenario:
1- I have downloaded ODAC Software Release 10.1.0.4.0 to a folder in my Windows 2003 server. (This Worked and the size downloaded is the same as the one shown in the Oracle Website)
2- I double-clicked the .exe file to extract the files. (This worked)
3- The ODAC.Exe created the folder called disk 1(this worked)
4- I double-clicked the Setup.exe to run the Oracle Universal Installer
5- A Command Pronmt windows comes up, it waits around 5 seconds and I get a message saying:
"Error writing to directory "C/Documents~1/Local~1/Temp/ OraInstall .... Please ensure that this directory is writable and it has at least 45MB of free space"
Well, regarding the space, I have more than 30 GB available, so this is not the problem. In addition, I'm logged in as the administrator and I have personally change the folder settings (uncheck the read only box).
Now, the interesting aspect of this is that in the command window, I get a message saying:
C/Document~1/Admin/Locals~1/Temp/OraInstall.../oui/jlib/OraInstaller.jar/ Bad CRC 7f66d50e <should be 335f93a0>
In addition, I searched for the OraInstaller.Jar and I wasn't able to find it.
Please, I need some guidance as at this point i don't know what else to do.
Thank you!
Eduardo

Yes, as the others have said, there's a fair amount of steady force that needs to be applied.
I should be done in one swift, smooth motion. Make sure the MacBook is on a steady soft surfface when you do the ram ejection.
Likewise, when pushing the ram in, follow the instructions (little gap in the pins of the ram to the left), and push firmly and consistently, until it appears that the ram is solidly in.
When you put the L bracket back on, and re-seat the battery then turn on your MacBook, if it boots up correctly, you should be able to open up the 'about this mac' window from the Apple logo menu and see '1GB 667MHz DDR2 SDRAM' listed.
If not, shut down the MacBook, and try again to re-seat the ram, by pressing more firmly, or ejecting the ram and trying again.

Similar Messages

Someone meet the problem, I am not abble install mac OS 10.6 snow leopard on intel based machine, (intel core 2 duo, 2,8 ghz, 4GB RAM, 320 GB HDD, OSX 10.5.8) system every time wrote "OS X snow leopard cannot be install on this machine" please help, Majo

omeone meet the problem, I am not abble install mac OS 10.6 snow leopard on intel based machine, (intel core 2 duo, 2,8 ghz, 4GB RAM, 320 GB HDD, OSX 10.5.8) system every time wrote "OS X snow leopard cannot be install on this machine" please help, Majo

It is retail disk, i bought it in apple store. I also resetter PRRAM and SMC and checked disk. I also tried clean installation and upgrade, nothing works, after run installation program after few seconds wrote: OS X Snow Leopard cannot be install on this machine :-(
Thank you for your answer
Majo

TS4436 Iphone 4 camera worked fine for 2 years then turned all flash photos red after installed Fast Torchlight App - deletion of app did not fix camera problem - please help?

Iphone 4 camera worked fine for 2 years then all photos with flash came out as red after installed Fast Torchlight App - deletion of app did not fix camera problem - please help?

Try This...
Close All Open Apps... Sign Out of your Account... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430
If no joy...
Connect to iTunes on the computer you usually Sync with and “ Restore “...
http://support.apple.com/kb/HT1414

I believe that I have a keylogger or some sort of spyware installed on my mac, please help!

I followed this procedure to check my files:
Please read this whole message before doing anything.
The following procedure will help whether your system has been modified. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.
These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing.
Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects.
Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then either copy or drag it. The headings “Step 1” and so on are not part of the commands.
Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the page that opens.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
Step 1
Copy or drag — do not type — the line below into the Terminal window, then press return:
kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}'
Post the lines of output (if any) that appear below what you just entered (the text, please, not a screenshot.) You can omit the final line ending in “$”.
Step 2
Repeat with this line:
sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix)|edu\.mit|org\.(amavis|apache|cups|isc|ntp|postfix|x)/{print $3}'
This time, you'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. You don't need to post the warning.
Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step.
Step 3
launchctl list | sed 1d | awk '!/0x|com\.apple|edu\.mit|org\.(x|openbsd)/{print $3}'
Step 4
ls -1A /e*/mach* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts 2> /dev/null
Step 5
osascript -e 'tell application "System Events" to get name of every login item' 2> /dev/null
Remember, steps 1-5 are all drag-and-drop or copy-and-paste, whichever you prefer — no typing, except your password. Also remember to post the output.
You can then quit Terminal.
I believe that I have a keylogger or some sort of spyware installed on my mac, please help!
POST YOUR OUTPUT FOR REVIEW/COMMENT.
After running these commands, here is the output. Can you please tell me if you see anything here. I would be so grateful.
com.oxsemi.driver.OxsemiDeviceType00 (1.28.13)
at.obdev.nke.LittleSnitch (4052)
Password:
com.wdc.WDSmartWareServer
com.wdc.WDDMservice
com.sierrawireless.SwitchTool
com.oracle.java.JavaUpdateHelper
com.oracle.java.Helper-Tool
com.microsoft.office.licensing.helper
com.lacie.desktopmanager.service
com.google.keystone.daemon
com.adobe.fpsaud
at.obdev.littlesnitchd
jp.buffalo.NASPower
com.oracle.java.Java-Updater
com.lacie.eventsactions.launcher.agent
com.hp.messagecenter.launcher
com.hp.devicemonitor
com.google.keystone.system.agent
at.obdev.LittleSnitchUIAgent
com.nds.pcshow.uninstall
com.nds.pcshow
com.facebook.videochat.thomasbrown.updater
com.adobe.ARM.202f4087f2bbde52e3ac2df389f53a4f123223c9cc56a8fd83a6f7ae
com.adobe.AAM.Scheduler-1.0
LaCie DiscRecording/LaCie DiscRecording.pkg:
Contents
/Library/Address Book Plug-Ins:
/Library/Components:
/Library/Extensions:
/Library/Frameworks:
AEProfiling.framework
AERegistration.framework
Adobe AIR.framework
AudioMixEngine.framework
EWSMac.framework
HPDeviceModel.framework
HPPml.framework
HPScan.framework
HPServicesInterface.framework
HPSmartPrint.framework
HPSmartX.framework
NyxAudioAnalysis.framework
PluginManager.framework
Snapfish.framework
iLifeFaceRecognition.framework
iLifeKit.framework
iLifePageLayout.framework
iLifeSQLAccess.framework
iLifeSlideshow.framework
iTunesLibrary.framework
/Library/Input Methods:
/Library/Internet Plug-Ins:
AdobePDFViewer.plugin
Flash Player.plugin
JavaAppletPlugin.plugin
Quartz Composer.webplugin
QuickTime Plugin.plugin
SharePointBrowserPlugin.plugin
SharePointWebKitPlugin.webplugin
Silverlight.plugin
flashplayer.xpt
googletalkbrowserplugin.plugin
iPhotoPhotocast.plugin
npgtpo3dautoplugin.plugin
nsIQTScriptablePlugin.xpt
o1dbrowserplugin.plugin
/Library/Keyboard Layouts:
/Library/LaunchAgents:
at.obdev.LittleSnitchUIAgent.plist
com.adobe.AAM.Updater-1.0.plist
com.google.keystone.agent.plist
com.hp.devicemonitor.plist
com.hp.messagecenter.launcher.plist
com.lacie.eventsactions.launcher.agent.plist
com.oracle.java.Java-Updater.plist
jp.buffalo.NASPower.plist
jp.buffalo.NASPower_pla.plist
/Library/LaunchDaemons:
at.obdev.littlesnitchd.plist
com.adobe.fpsaud.plist
com.apple.remotepairtool.plist
com.google.keystone.daemon.plist
com.lacie.desktopmanager.service.plist
com.microsoft.office.licensing.helper.plist
com.oracle.java.Helper-Tool.plist
com.oracle.java.JavaUpdateHelper.plist
com.sierrawireless.SwitchTool.plist
com.wdc.WDDMservice.plist
com.wdc.WDSmartWareServer.plist
/Library/PreferencePanes:
Flash Player.prefPane
HP Scanjet.prefPane
JavaControlPanel.prefPane
/Library/PrivilegedHelperTools:
.DS_Store
NasNavigator2.app
com.microsoft.office.licensing.helper
com.oracle.java.JavaUpdateHelper
/Library/QuickLook:
GBQLGenerator.qlgenerator
iWork.qlgenerator
/Library/QuickTime:
AppleIntermediateCodec.component
AppleMPEG2Codec.component
/Library/ScriptingAdditions:
/Library/Spotlight:
GBSpotlightImporter.mdimporter
Microsoft Entourage.mdimporter
Microsoft Office.mdimporter
iWeb.mdimporter
iWork.mdimporter
/Library/StartupItems:
ChmodBPF
HP IO
LocSvc
/etc/mach_init.d:
/etc/mach_init_per_login_session.d:
/etc/mach_init_per_user.d:
Library/Address Book Plug-Ins:
SkypeABDialer.bundle
SkypeABSMS.bundle
Library/Fonts:
04b-08.suit
Arial
Brush Script
Times New Roman
Verdana
Wingdings
Wingdings 2
Wingdings 3
encodings.dir
fonts.dir
fonts.list
fonts.scale
Library/Frameworks:
EWSMac.framework
Library/Internet Plug-Ins:
FacebookVideoCalling.bundle
Move-Media-Player.plugin
PlayerPlugin.bundle
fbplugin_1_0_3.plugin
Library/Keyboard Layouts:
Library/LaunchAgents:
com.adobe.AAM.Updater-1.0.plist
com.adobe.ARM.202f4087f2bbde52e3ac2df389f53a4f123223c9cc56a8fd83a6f7ae.plist
com.facebook.videochat.thomasbrown.plist
com.nds.pcshow.plist
com.nds.pcshow.uninstall.plist
Library/PreferencePanes:
Opera Preferences
TomTomHOMERunner, LDMStatusItem, apple-scc-20130209-112927
thank you much for helping...sincerely. tlenbro.

I followed this procedure to check my files:
Please read this whole message before doing anything.
The following procedure will help whether your system has been modified. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.
These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing.
Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects.
Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then either copy or drag it. The headings “Step 1” and so on are not part of the commands.
Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the page that opens.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
Step 1
Copy or drag — do not type — the line below into the Terminal window, then press return:
kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}'
Post the lines of output (if any) that appear below what you just entered (the text, please, not a screenshot.) You can omit the final line ending in “$”.
Step 2
Repeat with this line:
sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix)|edu\.mit|org\.(amavis|apache|cups|isc|ntp|postfix|x)/{print $3}'
This time, you'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. You don't need to post the warning.
Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step.
Step 3
launchctl list | sed 1d | awk '!/0x|com\.apple|edu\.mit|org\.(x|openbsd)/{print $3}'
Step 4
ls -1A /e*/mach* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts 2> /dev/null
Step 5
osascript -e 'tell application "System Events" to get name of every login item' 2> /dev/null
Remember, steps 1-5 are all drag-and-drop or copy-and-paste, whichever you prefer — no typing, except your password. Also remember to post the output.
You can then quit Terminal.
I believe that I have a keylogger or some sort of spyware installed on my mac, please help!
POST YOUR OUTPUT FOR REVIEW/COMMENT.
After running these commands, here is the output. Can you please tell me if you see anything here. I would be so grateful.
com.oxsemi.driver.OxsemiDeviceType00 (1.28.13)
at.obdev.nke.LittleSnitch (4052)
Password:
com.wdc.WDSmartWareServer
com.wdc.WDDMservice
com.sierrawireless.SwitchTool
com.oracle.java.JavaUpdateHelper
com.oracle.java.Helper-Tool
com.microsoft.office.licensing.helper
com.lacie.desktopmanager.service
com.google.keystone.daemon
com.adobe.fpsaud
at.obdev.littlesnitchd
jp.buffalo.NASPower
com.oracle.java.Java-Updater
com.lacie.eventsactions.launcher.agent
com.hp.messagecenter.launcher
com.hp.devicemonitor
com.google.keystone.system.agent
at.obdev.LittleSnitchUIAgent
com.nds.pcshow.uninstall
com.nds.pcshow
com.facebook.videochat.thomasbrown.updater
com.adobe.ARM.202f4087f2bbde52e3ac2df389f53a4f123223c9cc56a8fd83a6f7ae
com.adobe.AAM.Scheduler-1.0
LaCie DiscRecording/LaCie DiscRecording.pkg:
Contents
/Library/Address Book Plug-Ins:
/Library/Components:
/Library/Extensions:
/Library/Frameworks:
AEProfiling.framework
AERegistration.framework
Adobe AIR.framework
AudioMixEngine.framework
EWSMac.framework
HPDeviceModel.framework
HPPml.framework
HPScan.framework
HPServicesInterface.framework
HPSmartPrint.framework
HPSmartX.framework
NyxAudioAnalysis.framework
PluginManager.framework
Snapfish.framework
iLifeFaceRecognition.framework
iLifeKit.framework
iLifePageLayout.framework
iLifeSQLAccess.framework
iLifeSlideshow.framework
iTunesLibrary.framework
/Library/Input Methods:
/Library/Internet Plug-Ins:
AdobePDFViewer.plugin
Flash Player.plugin
JavaAppletPlugin.plugin
Quartz Composer.webplugin
QuickTime Plugin.plugin
SharePointBrowserPlugin.plugin
SharePointWebKitPlugin.webplugin
Silverlight.plugin
flashplayer.xpt
googletalkbrowserplugin.plugin
iPhotoPhotocast.plugin
npgtpo3dautoplugin.plugin
nsIQTScriptablePlugin.xpt
o1dbrowserplugin.plugin
/Library/Keyboard Layouts:
/Library/LaunchAgents:
at.obdev.LittleSnitchUIAgent.plist
com.adobe.AAM.Updater-1.0.plist
com.google.keystone.agent.plist
com.hp.devicemonitor.plist
com.hp.messagecenter.launcher.plist
com.lacie.eventsactions.launcher.agent.plist
com.oracle.java.Java-Updater.plist
jp.buffalo.NASPower.plist
jp.buffalo.NASPower_pla.plist
/Library/LaunchDaemons:
at.obdev.littlesnitchd.plist
com.adobe.fpsaud.plist
com.apple.remotepairtool.plist
com.google.keystone.daemon.plist
com.lacie.desktopmanager.service.plist
com.microsoft.office.licensing.helper.plist
com.oracle.java.Helper-Tool.plist
com.oracle.java.JavaUpdateHelper.plist
com.sierrawireless.SwitchTool.plist
com.wdc.WDDMservice.plist
com.wdc.WDSmartWareServer.plist
/Library/PreferencePanes:
Flash Player.prefPane
HP Scanjet.prefPane
JavaControlPanel.prefPane
/Library/PrivilegedHelperTools:
.DS_Store
NasNavigator2.app
com.microsoft.office.licensing.helper
com.oracle.java.JavaUpdateHelper
/Library/QuickLook:
GBQLGenerator.qlgenerator
iWork.qlgenerator
/Library/QuickTime:
AppleIntermediateCodec.component
AppleMPEG2Codec.component
/Library/ScriptingAdditions:
/Library/Spotlight:
GBSpotlightImporter.mdimporter
Microsoft Entourage.mdimporter
Microsoft Office.mdimporter
iWeb.mdimporter
iWork.mdimporter
/Library/StartupItems:
ChmodBPF
HP IO
LocSvc
/etc/mach_init.d:
/etc/mach_init_per_login_session.d:
/etc/mach_init_per_user.d:
Library/Address Book Plug-Ins:
SkypeABDialer.bundle
SkypeABSMS.bundle
Library/Fonts:
04b-08.suit
Arial
Brush Script
Times New Roman
Verdana
Wingdings
Wingdings 2
Wingdings 3
encodings.dir
fonts.dir
fonts.list
fonts.scale
Library/Frameworks:
EWSMac.framework
Library/Internet Plug-Ins:
FacebookVideoCalling.bundle
Move-Media-Player.plugin
PlayerPlugin.bundle
fbplugin_1_0_3.plugin
Library/Keyboard Layouts:
Library/LaunchAgents:
com.adobe.AAM.Updater-1.0.plist
com.adobe.ARM.202f4087f2bbde52e3ac2df389f53a4f123223c9cc56a8fd83a6f7ae.plist
com.facebook.videochat.thomasbrown.plist
com.nds.pcshow.plist
com.nds.pcshow.uninstall.plist
Library/PreferencePanes:
Opera Preferences
TomTomHOMERunner, LDMStatusItem, apple-scc-20130209-112927
thank you much for helping...sincerely. tlenbro.

[TV@Master] Problem please help

I have Msi.mother board PT8-Neo -LSR , Model No.Ms-6799 , main board bios -Phonenix ,maind board version i updat it to 2.2 , cpu size 2.4 G celleron D/256/533 , memory size 256DDram (400),display card Nvidia Riva TNT2 model 64
the problem that i face it when i put my TV@nywhere -master card ,the pc stop at the main page that show the biso version and name of bios company and the letters do not bost well it look like a virus work , and when i take tha card off the pc go normally , i tried put it to other PCI the same problem
please help

i meany by fix the problem of getting the pc go on to windows with card on PCI salot but i still have the broblem of the driver
please read my reply again
my operating system is win me and i have also another pc have XP
when i log in to windows the system show that found my TV@nywhere card but it didnt took the installatin driver for it i tried to install the driver directly
but it give me this 2 mesages when i try to install the driver
MSI TV card is not found ,stop the installation
the other message is
MSI pvs driver installatin failed
i download the driver from msi page also give me the same messages
for known on Device Manager it show me that the driver there but do not have the driver and the ? mark beside them
what to do now

My iphone 4 is acting like crap right i can't even restore it everytime i try to reboot it my iphone freezes at the apple logo it is ******* to the point where i just want to smash it how do i solve this problem please help?

my iphone 4 is acting like crap right i can't even restore it everytime i try to reboot it my iphone freezes at the apple logo it is ******* me off to the point where i just want to smash it how do i solve this problem please help?

Don't worry, just follow these steps to fix iPhone stuck on Apple logo
=> First of all Start your Computer and then connect with Internet connection, now Download the latest version of the iTunes application
=> Now install the iTunes application in your System and connect your Device with computer via Data cable
=> Now connect your Device with iTunes application and then Tab on summary option, see in the left side bar of iTunes
=> Now Select restore option from iTunes and then confirm the Restore Message for better results. After this unplug your Device and Restart it
I hope that will surely
Thank you...

X-Fi Fatal1ty Plat1num Champion Ed. problem, please help!

9X-Fi Fatalty Platnum Champion Ed. problem, please help!? Hi there everyone,
So i have a X-Fi Fatalty Platnum Champion Ed. and a computer with Windows 7.
I've searched the web and i found many people saying that the card it's working and perfectly compatible so i would like to exclude this option as far as the problems that i'm having.
So, right out of the box i've placed the front panel in with the ribbon cable and the power connected to it, then i connected the other end of the ribbon cable and finally placed the card in one of the PCI slots i have free.
Now, when i start my PC, i don't hear any particolar "beep messages" but nothing will come on the screen, in few words my PC will not boot at all. I can hear the HDD spinning, everything sounds normal except for that "little" problem.
So, i re-did all the connections thinking that maybe i did something wrong, but following the instruction i did exactly as told. So i tried again to power up the computer and i've noticed that the X-Fi logo is lit up (red light) and.. I don't really know if that means something or it's just something aside that doesn't really matter.. But, what is it's The PCI card is broken or there's something else?
I did try to disable the sound card (integrated mobo sound) from the BIOS but that didn't change anything. I did try all the software options but this looks like more of an hardware problem (please correct me if i'm wrong and/or i've missed something).
There's something that popped up in my mind.. the PSU. I noticed that i have a 300W PSU (mm.. low, isn't it's)?and i was wondering if that's enough or i need a more powerful one.. and if that's may be the case for the PCI to not work at all causing all i've already explained above. I mean.. It seems like i've installed a dead peripheral and that's impeding the computer to start up..
I don't know.. I need clarification and help, PLEASE.
Thank you very much in advance!

Look at the beta thread sticked above but good luck waiting for a new driver. That beta driver has been there since January and although better than the normal driver it is still crap.
All the boot type issues are with the SSD but if you getting in game crashes etc... under windows 8 that is simply that the driver stinks.

Oracle Designer Problem Please help me

Sir,
1) I created a database
2) Run>cd d:\Oracle_home\repadm61\admin\@ckqa
@ckparams.txt
@ ckvalqa
@ ckcreate
3)Opened Repository Administration Utility
Log in as 'repos_manager/repos_manager@orcltest'
Installed Repository.
4) Opened Oracle 9i Designer. I am able to connect
as 'repos_manager/repos_manager@orcltest'
But I am not able to logon as any other user in same database/ any other user in different database. Why?
Please help me.
regards
Mathew

duplicate thread, see this one -> Re: Oracle Designer Problem Please help me

System D.O.T automatically why? problem please help me

hello everybody,
please help me my system says at post message that wrong cmos information then gives me option to boot or go to bios when i check my bios , my ONBOARD LAN GETS ENABLED AUTOMATICALLY ,the Frequency tab i check says something like PRIVATE DOT ENABLED AND CPU+AGP SOMETHING i mean my comptuer gets fast and the CPU fan becomes on full speed and i hear loud noise until Corecenter runs it becomes quiet again. the question is is this a bios fault or something , DID ANYBODY WHO BOUGHT 865PE PLATINIUM BOARD EXPERIENCE THIS PROBLEM PLEASE HELP ME MY CONFIGURATIONS ARE BELOW
PENTIUM 2.40 GHZ PRESCOTT (54 C MAXIMUM)
MSI 865PE PLATINIUM BOARD (IT GOT NO RAID ABILITY)
DDR 400 MHZ KINGSTON SINGLE CHIP RAM (ALTHOUGH IT RUNS AT 333MHZ)
MSI GEFORCE FX 5200 T128 (64 BIT DAMN IT!!!)
MSI CD ROM
SONY FLOPPY
COMPUTER CASING WITH SMALL MINI ADDITIONAL FAN ON THE SIDE (IT RUNS MAYBE AND ALSO GIVES ELECTRIC SHOCK OR SOMTHING SOMETIMES)
STABIMATIC 500V AUTOMATIC STABILIZER(ALTHOUGH I HAVE UPS CAN SOME BODY TELL ME IS UPS ALSO STABILIZER OF APC(AMERICAN POWER ----)
AMI BIOS 3.4
SO CAN ANY BODY TELL ME IF THIS IS A PROBLEM OF BIOS SHOULD I UPGRADE TO LATEST
WHAT METHOD THROUGH AUTOUPDATE OR MANUAL , I ONLY ONCE DID MANUALLY ON MY DELL 4100 PIECE OF CAKE !

Hi,
Go to here for MSI LIVEUPDATE
http://www.msi.com.tw/program/support/software/swr/spt_swr_detail.php?UID=556&kind=1
Install and run program.........
BIOS problems:
http://www.msi.com.tw/html/support/bios/note/boot.htm
If you would like to download bios and install........
http://www.msi.com.tw/program/support/bios/bos/spt_bos_detail.php?UID=556&kind=1
You can also choose 3.7 if wish too first.....
I am sure this will help you.
Del

990fxa gd80 raid 0 problem please help me i am begging you

so i will start with my set up
990fxa dg80 mb
fx 8350 cpu
780ti
8 gig of ram
256 hdd
2x samsung 850 evo
750 hybrid drive
So at this stage all my data is on the 750 hdd and the disk is stored away. my problem started with me buyng 2 mx100 256 ssds . If my bios is set to ide or ahci they work fine i had my windows instaled on 1 of them all woks fine. Once i switch my bios to raid ( before i set up my raid 0) boot up win 7 instalation i do not see any drives ( i know is normal) load the drivers for the raid controler (sb950 for w7 as it says in themanual) and only my 256 hdd shows up but not the ssds . Than i set them up in ld raid 0 same problem . Tryed on another 2 mbs ... 1 same and a gygabite same problem. So i was sure there is a problem with ssds. I got rid of them got 2 new 850 evo 250 gb same problem. please help me i am so desparate i am willing to pay woth body organs for help

I..have a few questions...
1. You set BIOS to the RAID mode, and under that option there's a Board SATA RAID ROM, do you set it as Legacy ROM?
2. Did you enter Ctrl+F to initialize the drives/Delete Array(If they're used SSDs) and create RAID0?
3. Is your Win7 64 bit or 32 bit?
4. I assume it's 64 bit, did you copy the W764 folder for driver loading?
And make sure you get the driver from here:
http://www.msi.com/support/mb/990FXAGD80.html#down-driver&Win7 64

Urgent Problem please Help(hayat)

Hello Hi,
I want to Install Form 6.0 With Oracle 8i on Server
mean not personal oracle,
if i install first oracle 8i and then form 6.0 then
they overwrite their homes and vice versa.
What method i use to control this problem.
please help me so that i install form 6.0 on oracle 8i server.
thanks
hayat

Ok, I have read the sun site and downloaded the JDK and saved it to disk in the C:\ drive.
However I still get the same error so I think I must be very stupid and I think the computer knows that.

My iphone is on recovery mode and i can´t turn on it, when i try to recover it from itunes i get: "unknown error (36), i´ve tried to do lot of things but i can´t solve my problem. please help!!

my iphone is on recovery mode and i can´t turn on it, when i try to recover it from itunes i get: unknown error (36), i´ve tried to do lot of things but i can´t solve my problem. please help!!

Hi, i had the same problem. Try to find the file "apple" or "itunes" don't know it anymore exactly. Ahm well you need to delet any information or just plug in your iphone into an other computer. important is that your iphone never has been pluged in this computer before. This was what i did, and it worked!

Problem Please help me.....Let me know the area to look for it I am a DBA..

Problem Please help me.....Let me know the area to look for it I am a DBA..Thanks in advance to let me know the cause and the area to look and fix it...
Server Error in '/' Application.
Problem with SAP/BAPI. SAP.Connector.RfcCommunicationException: Connect to message server failed Connect_PM MSHOST=prddb01.lamrc.com, R3NAME=PRD, GROUP=Prod HR PRD LOCATION CPIC (TCP/IP) on local host ERROR service 'sapmsPRD' unknown TIME Wed May 04 08:59:06 2005 RELEASE 620 COMPONENT NI (network interface) VERSION 36 RC -3 MODULE ninti.c LINE 428 DETAIL NiPServToNo SYSTEM CALL getservbyname COUNTER 1 at SAP.Connector.SAPConnection.ThrowRfcException(RFC_ERROR_INFO_EX rfcerrInfo, Encoding encoding, String languangeCode) at SAP.Connector.SAPConnection.Open() at SAP.Connector.SAPClient.RfcInvoke(String method, Object[] methodParamsIn) at SAP.Connector.SAPClient.SAPInvoke(String method, Object[] methodParamsIn) at SoftwareKeySAPG.SAPProxy1.Z_Bapi_Load_Kpi_Region(ZSOFT_KPI_REGIONS_MTable& Kpi_Regions, ZSOFT_PROD_TYPETable& Prod_Type) at SoftwareKeySAPG.SAPGSK.LoadKPIRegion(DataSet dsProduct)
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Web.Services.Protocols.SoapException: Problem with SAP/BAPI. SAP.Connector.RfcCommunicationException: Connect to message server failed Connect_PM MSHOST=prddb01.lamrc.com, R3NAME=PRD, GROUP=Prod HR PRD LOCATION CPIC (TCP/IP) on local host ERROR service 'sapmsPRD' unknown TIME Wed May 04 08:59:06 2005 RELEASE 620 COMPONENT NI (network interface) VERSION 36 RC -3 MODULE ninti.c LINE 428 DETAIL NiPServToNo SYSTEM CALL getservbyname COUNTER 1 at SAP.Connector.SAPConnection.ThrowRfcException(RFC_ERROR_INFO_EX rfcerrInfo, Encoding encoding, String languangeCode) at SAP.Connector.SAPConnection.Open() at SAP.Connector.SAPClient.RfcInvoke(String method, Object[] methodParamsIn) at SAP.Connector.SAPClient.SAPInvoke(String method, Object[] methodParamsIn) at SoftwareKeySAPG.SAPProxy1.Z_Bapi_Load_Kpi_Region(ZSOFT_KPI_REGIONS_MTable& Kpi_Regions, ZSOFT_PROD_TYPETable& Prod_Type) at SoftwareKeySAPG.SAPGSK.LoadKPIRegion(DataSet dsProduct)
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[SoapException: Problem with SAP/BAPI.
SAP.Connector.RfcCommunicationException: Connect to message server failed
Connect_PM MSHOST=prddb01.lamrc.com, R3NAME=PRD, GROUP=Prod HR PRD
LOCATION    CPIC (TCP/IP) on local host
ERROR       service 'sapmsPRD' unknown
TIME        Wed May 04 08:59:06 2005
RELEASE     620
COMPONENT   NI (network interface)
VERSION     36
RC          -3
MODULE      ninti.c
LINE        428
DETAIL      NiPServToNo
SYSTEM CALL getservbyname
COUNTER     1
   at SAP.Connector.SAPConnection.ThrowRfcException(RFC_ERROR_INFO_EX rfcerrInfo, Encoding encoding, String languangeCode)
   at SAP.Connector.SAPConnection.Open()
   at SAP.Connector.SAPClient.RfcInvoke(String method, Object[] methodParamsIn)
   at SAP.Connector.SAPClient.SAPInvoke(String method, Object[] methodParamsIn)
   at SoftwareKeySAPG.SAPProxy1.Z_Bapi_Load_Kpi_Region(ZSOFT_KPI_REGIONS_MTable& Kpi_Regions, ZSOFT_PROD_TYPETable& Prod_Type)
   at SoftwareKeySAPG.SAPGSK.LoadKPIRegion(DataSet dsProduct)]
   System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall) +1503
   System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters) +218
   SoftwareKeyUI.InstalledBaseDataWS.InstalledBaseData.LoadKPIRegionMulti(DataSet products)
   SoftwareKeyUI.InstalledBaseDataAccess.LoadKPIRegionMulti(DataSet products)
   SoftwareKeyUI.InstalledBase.GetRegionDetails(Int32 userId, String product, String regionType)
   SoftwareKeyUI.FilteredAccess.GetRegionDetails(Int32 userId, String product, String regionType)
   SoftwareKeyUI.search.LoadRegionDetails()
   SoftwareKeyUI.search.regionType_SelectedIndexChanged(Object sender, EventArgs e)
   System.Web.UI.WebControls.ListControl.OnSelectedIndexChanged(EventArgs e) +108
   System.Web.UI.WebControls.DropDownList.System.Web.UI.IPostBackDataHandler.RaisePostDataChangedEvent() +26
   System.Web.UI.Page.RaiseChangedEvents() +115
   System.Web.UI.Page.ProcessRequestMain() +1099

The error is a very basic one - the sapmsPRD service is not known. You will have to go to <NT_ROOT>\system32\drivers\etc and add the entry sapmsPRD 3600 to this file.
This is basically telling the requester at what port to look for the message server.
C

Problem Please help me.....Let me know the area to look for it

Problem Please help me.....Let me know the area to look for it I am a DBA..Thanks in advance to let me know the cause and the area to look and fix it...
Server Error in '/' Application.
Problem with SAP/BAPI. SAP.Connector.RfcCommunicationException: Connect to message server failed Connect_PM MSHOST=prddb01.lamrc.com, R3NAME=PRD, GROUP=Prod HR PRD LOCATION CPIC (TCP/IP) on local host ERROR service 'sapmsPRD' unknown TIME Wed May 04 08:59:06 2005 RELEASE 620 COMPONENT NI (network interface) VERSION 36 RC -3 MODULE ninti.c LINE 428 DETAIL NiPServToNo SYSTEM CALL getservbyname COUNTER 1 at SAP.Connector.SAPConnection.ThrowRfcException(RFC_ERROR_INFO_EX rfcerrInfo, Encoding encoding, String languangeCode) at SAP.Connector.SAPConnection.Open() at SAP.Connector.SAPClient.RfcInvoke(String method, Object[] methodParamsIn) at SAP.Connector.SAPClient.SAPInvoke(String method, Object[] methodParamsIn) at SoftwareKeySAPG.SAPProxy1.Z_Bapi_Load_Kpi_Region(ZSOFT_KPI_REGIONS_MTable& Kpi_Regions, ZSOFT_PROD_TYPETable& Prod_Type) at SoftwareKeySAPG.SAPGSK.LoadKPIRegion(DataSet dsProduct)
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Web.Services.Protocols.SoapException: Problem with SAP/BAPI. SAP.Connector.RfcCommunicationException: Connect to message server failed Connect_PM MSHOST=prddb01.lamrc.com, R3NAME=PRD, GROUP=Prod HR PRD LOCATION CPIC (TCP/IP) on local host ERROR service 'sapmsPRD' unknown TIME Wed May 04 08:59:06 2005 RELEASE 620 COMPONENT NI (network interface) VERSION 36 RC -3 MODULE ninti.c LINE 428 DETAIL NiPServToNo SYSTEM CALL getservbyname COUNTER 1 at SAP.Connector.SAPConnection.ThrowRfcException(RFC_ERROR_INFO_EX rfcerrInfo, Encoding encoding, String languangeCode) at SAP.Connector.SAPConnection.Open() at SAP.Connector.SAPClient.RfcInvoke(String method, Object[] methodParamsIn) at SAP.Connector.SAPClient.SAPInvoke(String method, Object[] methodParamsIn) at SoftwareKeySAPG.SAPProxy1.Z_Bapi_Load_Kpi_Region(ZSOFT_KPI_REGIONS_MTable& Kpi_Regions, ZSOFT_PROD_TYPETable& Prod_Type) at SoftwareKeySAPG.SAPGSK.LoadKPIRegion(DataSet dsProduct)
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[SoapException: Problem with SAP/BAPI.
SAP.Connector.RfcCommunicationException: Connect to message server failed
Connect_PM MSHOST=prddb01.lamrc.com, R3NAME=PRD, GROUP=Prod HR PRD
LOCATION CPIC (TCP/IP) on local host
ERROR service 'sapmsPRD' unknown
TIME Wed May 04 08:59:06 2005
RELEASE 620
COMPONENT NI (network interface)
VERSION 36
RC -3
MODULE ninti.c
LINE 428
DETAIL NiPServToNo
SYSTEM CALL getservbyname
COUNTER 1
at SAP.Connector.SAPConnection.ThrowRfcException(RFC_ERROR_INFO_EX rfcerrInfo, Encoding encoding, String languangeCode)
at SAP.Connector.SAPConnection.Open()
at SAP.Connector.SAPClient.RfcInvoke(String method, Object[] methodParamsIn)
at SAP.Connector.SAPClient.SAPInvoke(String method, Object[] methodParamsIn)
at SoftwareKeySAPG.SAPProxy1.Z_Bapi_Load_Kpi_Region(ZSOFT_KPI_REGIONS_MTable& Kpi_Regions, ZSOFT_PROD_TYPETable& Prod_Type)
at SoftwareKeySAPG.SAPGSK.LoadKPIRegion(DataSet dsProduct)]
System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall) +1503
System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters) +218
SoftwareKeyUI.InstalledBaseDataWS.InstalledBaseData.LoadKPIRegionMulti(DataSet products)
SoftwareKeyUI.InstalledBaseDataAccess.LoadKPIRegionMulti(DataSet products)
SoftwareKeyUI.InstalledBase.GetRegionDetails(Int32 userId, String product, String regionType)
SoftwareKeyUI.FilteredAccess.GetRegionDetails(Int32 userId, String product, String regionType)
SoftwareKeyUI.search.LoadRegionDetails()
SoftwareKeyUI.search.regionType_SelectedIndexChanged(Object sender, EventArgs e)
System.Web.UI.WebControls.ListControl.OnSelectedIndexChanged(EventArgs e) +108
System.Web.UI.WebControls.DropDownList.System.Web.UI.IPostBackDataHandler.RaisePostDataChangedEvent() +26
System.Web.UI.Page.RaiseChangedEvents() +115
System.Web.UI.Page.ProcessRequestMain() +1099

Hi
You should make a mapping for the service sapmsPRD in your /etc/services file (On Windows: C:WINDOWSSYSTEM32DRIVERSETCservices). If your instance number is 00 you will have to add the following entry:
sapmsPRD 3600/tcp
Good luck!
René van Es

I want to buy an in-app purchase but i don`t remember my security questions and i cant access my recovery email either, what can i do? i have 100$ on my account and cant use it because of that problem, please help URGENT

I want to buy an in-app purchase but i don`t remember my security questions and i cant access my recovery email either, what can i do? i have 100$ on my account and cant use it because of that problem, please help URGENT

If you have a rescue email address on your account then you can use that - follow steps 1 to 5 half-way down this page will give you a reset link on your account : http://support.apple.com/kb/HT5312
If you don't have a rescue email address (you won't be able to add one until you can answer your questions) then you will need to contact Support in your country to get the questions reset : http://support.apple.com/kb/HT5699

Installing ODAC.Exe Problem - Please Help!

Similar Messages

Maybe you are looking for