Installing ODBC requires newer version of the Univeral Installer
Hi, I need to install a newer ODBC driver for 3rd part software to connect to our new UTF-8 version of the database. I downloaded the version of ODBC I need, but when I try to install it I get an error saying I need a newer version of the Universal Installer. I've looked all over the site and cant' find a place I can just download a new version of the OUI. Any suggestions?
What version of the Oracle client are you using and what version of the Oracle ODBC driver are you trying to use?
I expect that the problem you're having is that Oracle changed the way that ODBC driver updates are packaged a couple years ago. Rather than being separate downloads, they included the ODBC driver updates in the Oracle client patchsets you can download from Metalink. That simplified life in that organizations that apply the full client patchset didn't have to separately install the ODBC driver updates. It complicated life in that if a client patchset updates the version of the OUI that is installed, the stand-alone install you can download from OTN requires the patched OUI which you only get by installing the client patchset from Metalink or getting a later version of Oracle that happens to include the later version of the OUI. Assuming your organization has a valid support contract, getting the client patchset from Metalink is most likely the way to go.
Justin
Similar Messages
-
How to get a newer version of the Universal Installer
I have a need fot and updated version of the Oracle 9 ODBC driver. The driver, however requires a newer version of the OUI (we have 2.2.0.16.0 and it wants 2.3.0.5.0a). I can't seem to find a seperate download just for the installer. Does anyone know of anyway to just get an update to the installer?
Hello,
Here you can download the newer versions of ODBC drivers with or without Oracle Universal Installer:
http://www.oracle.com/technology/software/products/rdbodbc/index.html
I wait that this can help you!!
Best Regards,
Paola Pullas
http://www.ecuoug.org -
When the message arrives, the message tone sound that many times. How this problem can be solved? I installed the new version, but the problem is not resolved, the future is to be taken into account in the new version of this?
I'm not sure I understand the question, is the message tone going more then once?
Turn off repeat message alert here:
settings > notifications > messages > repeat alert > never
Some people have found this does not stop the repeat miessage tone,
if you are one of those then I suggest you contact Apple:
http://www.apple.com/feedback/iphone.html
They may not respond, but hopefully will fix in uodate if enough people complain. -
I had an issue with my Cisco Anyconnect VPN not working, so uninstalled it. I've tried a new install and now I get the message "There is a newer version of the AnyConnect client installed" and it won't tell me install it at all. I've gone through various recommendations on the site included this :-
Go to "Regedit" and search for "Deterministic Networks" and delete it.
HKEY_LOCAL_MACHINE \SOFTWARE\Deterministic Networks
Search with the following keywords in the registry, under "Uninstall" or "Components" folders and delete any related entries.
Vpnapi
Vpngui
Cisco
CVPND
CVPNDRA
Ipsecdialer
Source: https://supportforums.cisco.com/message/3728011#3728011
But I've still got the same problem, and just cant find anything to help !Disable Internet Connection Sharing (ICS) and then try You can disable ICS in two ways:
Per Adapter:
Click the Start button.
Click on Control Panel.
Click on View Network Status and Tasks
Click on Change adapter settings
Right-click the shared connection and choose Properties
Click the Sharing tab
Clear the Allow other network users to connect through this computer's Internet connection checkbox
Click OK
System Wide:
Click the Start button (Windows' orb)
Type: services.msc and press ENTER
Double-Click on Internet Connection Sharing (ICS)
Change Startup Type to Disabled
Reboot the computer
You can now try reinstalling the WiscVPN client again -
How to remove preinstalled files of adobe photoshop from my mac mini so that i can install a new version of the same software.The previous version was removed using the app cleaner software.Could not continue installation of the new version because of the existance of files from the previous version.plz help
What "app cleaner software" ? I ask because installing Photoshop over a previous version has never been a problem. Perhaps your difficulty stems from another source, eg. "cleaner software" ?
If you look in your hard drive, at the root level there is a Library. In there is a folder called Application Support, and in that you will find a folder called Adobe. Files from your previous version are there.
However, I urge you to call Adobe support to make sure you are not doing anything that would mess up other Adobe applications.
http://www.adobe.com/support/connect/connecthostedsupport.html -
A new version of the data type is present than one required
Hi Experts,
I am getting a short dump saying "A new version of the data type is present than one required".
The data type in my case is the Transfer structure for 2LIS_02_SCL. I am getting this short dump whenever i try to change the transfer rules.
I tried activating and deactivating the transfer and update rules but to no avail. Kindly advice.
Thanks in advance.SAP Note 1157796 resolved the issue.
-
Hi. I can install Adobe Flash Player plugin as i usualy did since 5 years. The problem is that firefox is always asking fo it if i i had never install it. I've tried to install firefox newer versions and the problem pesists. Thanks.
Hi, glad that worked for you. Also thanks for the explanation as how you came about this. Yes, from my understanding any Install of the CS5, even a trial version Installs the 10.1 (beta/prerelease) versions. It is not clear to me or others why the 10.1 was used in the CS5 instead of the latest version (10.0.45.2). My only guess is that the 10.1 is very close to being released as a shipping version (final release) to the public. The 10.1 had a target date of the first half of 2010. Perhaps that was the reasoning. This is just my opinion:-)
As I said, many users are having this problem, not just with the CS5, but they Install the 10.1 thinking that will solve whatever problem they may be having with the latest version.
Your thread is very helpful for other users that may be having the exact problem that you were. For this reason if you marked your thread as answered, they would read it first.
Thanks,
eidnolb -
I recently upgraded my set of custom data flow components to use the SQL 2014 SDK as we are upgrading to SQL Server 2014 RTM. The only change I made to my custom components was to change the references to the following DLLs from version 11.0 to version
12.0:
Microsoft.SqlServer.DTSPipelineWrap
Microsoft.SQLServer.DTSRuntimeWrap
Microsoft.SQLServer.ManagedDTS
Microsoft.SqlServer.PipelineHost
After rebuilding my assembly, adding it to the GAC, and placing it in the appropriate directory structure (the 120\DTS\PipelineComponents directory for both the x86 and x64 versions), my components no longer display in the SSIS toolbox in SSDT. In
addition, whether loading up my packages in SSDT or executing them via the SSIS catalog (in SQL 2014), I get the series of error messages below. I do have a PerformUpgrade method implemented in my packages that has worked successfully through previous
component upgrades. I also found this seemingly relevant thread (Custom
SSIS Connection Manager error message in SSIS 2014 (RTM): The connection manager '' is not properly installed on this computer.) and tried modifying the extensions.xml script, but I was unsuccessful with this approach (though I could have done so
incorrectly).
Validation error. DFT Process Changes: DFT Process Changes: The component metadata for "xxx, clsid {874F7595-FB5F-40FF-96AF-FBFF8250E3EF}" could not be upgraded to the newer version of the component. The PerformUpgrade method failed.
Error loading xxx.dtsx: The "xxx" failed to cache the component metadata object and returned error code 0x80131600.
Error loading xxx.dtsx: Component xxx, clsid {874F7595-FB5F-40FF-96AF-FBFF8250E3EF} failed to initialize due to error 0xC0047067 "The "%1" failed to cache the component metadata object and returned error code 0x%2!8.8X!.".
Error loading xxx.dtsx: The component is missing, not registered, not upgradeable, or missing required interfaces. The contact information for this component is "".
Error loading xxx.dtsx: The component metadata for "xxx" could not be upgraded to the newer version of the component. The PerformUpgrade method failed.
Validation error. DFT Process Changes SSIS.Pipeline: The component metadata for "xxx, clsid {874F7595-FB5F-40FF-96AF-FBFF8250E3EF}" could not be upgraded to the newer version of the component. The PerformUpgrade method failed.
Thanks in advance,
BenHi Ben,
Please also update the reference to the SSIS assembly Microsoft.SqlServer.Dts.Design located in C:\Program Files (x86)\Microsoft SQL Server\120\SDK\Assemblies folder to the version 12.0.0.0. Besides, rename IDTSxxxx110 objects to IDTSxxxx120.
It may also be the factor that the custom mapping file is not created correctly. You can make a copy of the built-in mapping.xml.sample file, rename its extension to XML, and then edit its <ExtensionMapping> attribute:
<ExtensionMapping tag="mycustom extension"
oldAssemblyStrongName="MyCustomAssembly.MyCustomTask, MyCustomAssembly, Version=1.0.0.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91"
newAssemblyStrongName="MyCustomAssembly.MyCustomTask, MyCustomAssembly, Version=2.0.0.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91" />
Then, we need to upgrade the packages, and SSIS will read all the XML mapping files placed in this directory during upgrade.
References (although the blogs are written for SSIS 2008 by Matt, we can still refer to them for SSIS 2014):
http://blogs.msdn.com/b/mattm/archive/2008/02/01/custom-extensions-in-sql-server-2008.aspx
http://blogs.msdn.com/b/mattm/archive/2007/06/05/katmai-custom-components-and-upgrade.aspx
Regards,
Mike Yin
If you have any feedback on our support, please click
here
Mike Yin
TechNet Community Support -
Keep getting error message require newer version of iPod software to install apps on ipod touch v2.2.1. Is there a version limitation for using apps with the iPod touch? Loaded the latest updates etc.
I sounds like yu have a first generation (1G) iPod. You can update that as far as iOS 3.1.3. To get that update go here. You may have to use a different browser to get the sublink to work correctly.
Purchasing iOS 3.1 Software Update for iPod touch (1st generation)
Identify your iPod here:
Identifying iPod models -
ITunes requires new version of Apple Mobile Device Support....
Hi - I have just bought an iPod touch. I a;ready have a classic and a nano but as iTunes 9 was out I thought I'd upgrade to that before syncing the new Touch. However now I get the error:-
iTunes requires new version of Apple Mobile Device Support. Please uninstall both Apple Mobile Device Support and iTunes, then install iTunes agan.
So I did this following the procedure on the Apple Suport pages which referenced exactly this error message but from an earlier version (7 I think) of iTunes).
Basically, I used control panel to uninstall all the bits (including iTunes, Apple MDS, Quicktime and Bonjour) in the order it says. Rebooted, checked that program folders and files had really gone, downloaded a fresh copy of iTunes and installed - exactly the same error.
My Classic syncs fine. The Touch also syncs fine on a laptop I have on which I have iTunes 9.01 at the moment. The Touch is being detected because I get the USB conect sound and the error message in iTunes pops up as soon as it is connected.
The Apple Mobile Device Service is running (it was not running when I checked staright after the install, but I manually started it (it is set ot Auto start)) using .exe version 2.12.36.0
PC is a Windows Vista 64 running iTunes 9.02. The iTunes pack I downloaded was called iTunes64Setup so I'm guessing its the right one.
I always seem to be tearing my hair out when I get a new iPod or new iTunes. Not much left now so has anyone got any ideas?
Thanks very much,
StuartFound the solution in my case. I followed the Apple uninstall procedure again:-
http://support.apple.com/kb/HT1925
and found that the Apple Mobile Device Support did not uninstall properly. I needed to download an MS utility called Windows Installer Cleaup Utility
http://support.microsoft.com/kb/290301
(there was a post somewhere on here about it so thanks to that person).
When I rebooted, I found however that the Mobile Device Service was still installed and running and the installed files were present in C:\Program Files (x86)\Common Files\Apple.
So I Stopped the service (Control Panel, Administrative Tools, Services, Right click on the service and choose Properties, then click Stop. For good measure I also set it to Disabled (overkill) using the dropdown which will probably say Automatic when you look at it.
Then I found a Microsoft utility called SC.exe which is available in the Windows resource kit and can also be found here:-
http://www.petri.co.il/downloadfree_reskittools.htm
This is a command line tool, but easy to use. Unzip the sc.zip file, place sc.exe somewhere handy where you can find it from a command prompt and then open a command line (Start, Run..., type "cmd" Enter). Go to the folder where you put sc.exe and type the command:-
sc delete "Apple Mobile Device" (you need the quotes).
This deletes the service from the services list in the registry (you can check by closing the Services box and opening it again).
Now go to c:\Program Files (x86)\Common Files and delete the folder and subfolders called Apple.
OK - should have given your system a full clean out.
Then reinstall iTunes.
That was easy - but I guess I can forgive Apple for not being able to upgrade a version of iTunes without messing up - it's only version 9.0 after all, I'm sure it'll be OK in the next release. Seems like they're learning some tricks from Microsoft.
You folks in the US and Canada are luck however because you can get some help with this stuff. There's no help from Apple if you're in the UK. -
How can i remove "A newer version of the app" pop up
I keep getting the following pop up message everytime i open iTunes or download a song.
"A newer version of the app "APP NAME SHOWN HERE" already exists in your iTunes Library. Are you sure you want to replace it with the one you are moving?"
Its really annoying to have to click on "Don't Replace" for every app I have. How can I stop this pop up message?Download on another system, zip it, transfer to the PC's via a USB stick (or move it to an online service like Dropbox).
You may find that the PC has software that blocks it anyway, so it is safest to speak to your IT staff & ask them to install it. -
How Can I update my app new version to the registered devices
Well, we have developed an in-house app using the Unity3d Game Engine. I'm using a Developer Enterprise account, and have already created the proper certificates, registered the devices (7 ipads) and generated the provisioning Profile. I have already clicked in the 'build an run', and the Unity Engine builds the app, that after is opened at the Xcode. I havel already fixed the bugs, and the app is working properly at the ipads.
The problem is, I will need to Update the app, and I need to Update them without have to get them and build them at my own Mac, since they do not stay with me. I've been strugling with that for a while. I have downloaded the provisioning profile and sent by e-mail to one of the ipads, the one I'm using to test, and instaled it, but the version of my app have not been updated.
I checked on my app icloud capabilities. The page about the Update of in-house apps is not very clear(http://help.apple.com/iosdeployment-apps/mac/1.1/#app43ad802c), and I'm new in the development for IOS.
How can update my app at this Ipads? Is there any step-by-step to follow, more eplanatory that the link above?I didn't explained it correctly, I mean without getting the ipads, not the source code. I mean, at every time I need to launch a new version of the app, how can I update it through the internet, because I have installed my app running it at the ipads with the xcode, by usb. I'm using the enterprise program, so, as far as I know, the update is not through apple store.
The ipads are in use, and I'd like to update them without have to get them to install it myself. Hope I have explained it better this time. Thank you for your help. -
I have the newer version of the macbook pro and I have read the directions on how to authorize your computer to let you download previous song purchases from icloud onto your laptop, but I cannot find where it says "authorize this computer" at all. I have looked for it everywhere and still cannot find it. Please help!
Authorization and Deauthorization
Macs: iTunes Store- About authorization and deauthorization.
Windows: How to Authorize or Deauthorize iTunes | PCWorld.
In iTunes you use the Authorize This Computer or De-authorize This Computer option under the Store menu in iTunes' menubar. For Windows use the ALT-S keys to access it. Or turn on Windows 7 and 8 iTunes menus: iTunes- Turning on iTunes menus in Windows 8 and 7.
More On De-authorizing Computers (contributed by user John Galt)
You can de-authorize individual computers, but only by using those computers. The only other option is to "de-authorize all" from your iTunes account.
1. Open iTunes on a computer
2. From the Store menu, select "View my Account..."
3. Sign in with your Apple ID and password.
4. Under "Computer Authorizations" select "De-authorize All".
5. Authorize each computer you still have, as you may require.
You may only do this once per year.
After you "de-authorize all" your authorized computers, re-authorize each one as required.
If you have de-authorized all computers and need to do it again, but your year has not elapsed, then contact: Apple - Support - iTunes - Contact Us. -
How can i upgrade my iPhoto 7.1.5 to a newer version? the download 8.02 will not work as i need 8 and that isn't available on download on the site?
Thanks xYou can upgrade to iPhoto '11 with OS X 10.8.5 by purchasing an iPhoto '11 DVD from Amazon, eBay or other source - or you can upgrade your OS to Mavericks for free if your system meets the requirements and then purchase the upgrade to iPhoto '11 version 9.5.x from the App store - in either case backup first in case of problems
LN -
QuickTime version 7.1 is installed, iTunes requires QuickTime version 7.1.3
QuickTime version 7.1 is installed, iTunes requires QuickTime version 7.1.3 or later. Please reinstall iTunes.
That's the error message I have gotten for the past 3 days since trying to upgrade itunes. I have the newest quicktime downloaded, have deleted itunes and quicktime and redownloaded it all, and it still won't work. I have NO idea what to do to make this work, but it's driving me crazy. If anyone can help, please give some advice.You can try to fully remove both iTunes and Quicktime. Then reinstall the software again. The following link will walk you through the removal of both programs. Make sure you complete Step 16 in the article. Good luck.
http://docs.info.apple.com/article.html?artnum=93698
Maybe you are looking for
-
hi Experts, while running SQL Query i am getting an error as The text, ntext, and image data types cannot be compared or sorted, except when using IS NULL or LIKE operator. for the query select T1. Dscription,T1.docEntry,T1.Quantity,T1.Price , T2.Li
-
How to display results set of multiple reports into a single report table
Our goal is to create a single report (or dashboard) that shows the "funnel" of object creations related to each campaign. The flow goes from Activity to Lead to Opportunity as well as multiple steps within each (ie. Unqualified Lead -> Qualified Lea
-
10.9.2 machines having issues connecting to open directory
So i've set up a new mac mini with 10.9.2 and the most recent Server App. I managed to bind a 10.8.5 macbook air 11" and have had no issues, but when I started testing on the new machines (brand new iMac 27") with 10.9.2 im having issues, tested on
-
Hi All, What is buffering number?How it is useful in performance issue? Tell me the option where it is available? To set this what are navigational steps? Thanks inadvance. Yogeswar
-
Need clarifications regarding APEX_PUBLIC_USER
Hello all, Apex 3.0 on 10g 'am aware that APEX_PUBLIC_USER is the one used by the apex applications to get the stuff from the database. I have noticed that in v$session there do exist the apex_public_user even if i logout from the apex. In my product