Installing ODI 11.1.1.3g
Gurus.
I have a few questions on installing ODI 11g, I have 10g installation experience could you please assist me with these questions:
1. Is there a 64 bit download version of ODI 11g that I can download and install on server 2008 EE R2 x64?
2. Can I install any ODI Studio on 11.1.1.3 on a 64 bit server
3. Do I need to use the RCU before I install ODI or I can judt connect to the the master repositories similar to the version 10.1.3.5 installation.
Thanks for the help.
1.) I dont think there is a 64 bit version of ODI 11g. ODI 11 series is based on JDev which inturn is only available in a 32 bit version.
2.) ODI Studio can be installed on a 64 bit machine but you will have to install 32 bit version of Java on that machine and point ODI to that.
3.) You dont need RCU. Of course, you will need 11g compliant repositories to connect. You can install ODI Studio and then create repositories using ODI Studio.
Similar Messages
-
Unable to install odi on windows 7 64 bit
I am trying to install odi after installing the RCU on a compatible db.
The odi i downloaded from is http://www.oracle.com/technetwork/middleware/data-integrator/downloads/index.html
the setup starts in command line initially and passes monitor and min CPU requirements and then shows please wait for some time and then finally quits without showing any error etc,
Please adviseok now while using it on launcihing the installer wizard if i use system as username and role as normal it let me go ahead but when i chose odi schema and do next it fails with following error:
2013-01-16 15:11:36.610 NOTIFICATION rcu: oracle.sysman.assistants.common.dbutil.jdbc.JDBCEngine::connect: Connecting to database: user:system, role:Normal, connectString:(description=(address=(host=slc03lod.us.oracle.com)(protocol=tcp)(port=1522))(connect_data=(service_name=SLC03LOD)(server=dedicated)))
2013-01-16 15:11:48.233 NOTIFICATION rcu: oracle.sysman.assistants.common.task.ProgressPanel::progressToNextTask: waiting for delegate to be visible
2013-01-16 15:11:48.244 NOTIFICATION rcu: oracle.sysman.assistants.common.task.ProgressPanel::progressToNextTask: waiting for delegate to be visible
2013-01-16 15:11:48.266 NOTIFICATION rcu: oracle.sysman.assistants.rcu.backend.task.ActualTask::run: Executing Task: Master and Work Repository
2013-01-16 15:11:48.266 NOTIFICATION rcu: oracle.sysman.assistants.rcu.backend.validation.PrereqEvaluator::executePrereqTask: Prereq taskId = ODI
2013-01-16 15:11:48.266 NOTIFICATION rcu: oracle.sysman.assistants.rcu.backend.validation.PrereqEvaluator::executePrereqTask: Starting component prereq check
2013-01-16 15:11:48.287 ERROR rcu: oracle.sysman.assistants.rcu.backend.task.PrereqTask::execute: Prereq Evaluation Failed
oracle.sysman.assistants.rcu.backend.validation.PrereqException: RCU-6083:Failed - Check prerequisites requirement for selected component:ODI
Please refer to RCU log at D:\softwares\office\rcuHome\rcu\log\logdir.2013-01-16_14-17\rcu.log for details.
at oracle.sysman.assistants.rcu.backend.validation.PrereqEvaluator.executePrereqTask(PrereqEvaluator.java:658)
at oracle.sysman.assistants.rcu.backend.task.PrereqTask.execute(PrereqTask.java:68)
at oracle.sysman.assistants.rcu.backend.task.ActualTask.run(TaskRunner.java:306)
at java.lang.Thread.run(Thread.java:662)
2013-01-16 15:11:48.288 ERROR rcu: oracle.sysman.assistants.rcu.backend.task.ActualTask::run: RCU Operation Failed
oracle.sysman.assistants.common.task.TaskExecutionException: RCU-6083:Failed - Check prerequisites requirement for selected component:ODI
Please refer to RCU log at D:\softwares\office\rcuHome\rcu\log\logdir.2013-01-16_14-17\rcu.log for details.
User should have sysdba privileges
at oracle.sysman.assistants.rcu.backend.task.PrereqTask.execute(PrereqTask.java:76)
at oracle.sysman.assistants.rcu.backend.task.ActualTask.run(TaskRunner.java:306)
at java.lang.Thread.run(Thread.java:662)
If i try to connect system with role sysdba then it says invalid username/pwd however i am able to connect the system as sysdba from sqlplus -
Help: can not install ODI on SuSE Enterprise 10
I'm trying to install ODI 10.1.3.2.0 on SuSE Enterprise 10
Linux bottrop 2.6.16.21-0.8-smp #1 SMP Mon Jul 3 18:25:39 UTC 2006 i686 i686 i386 GNU/Linux
but i get the following error:
oracle@bottrop:~/tmp/setup/linux_i386> ./setup.bin
Preparing to install...
Extracting the JRE from the installer archive...
Unpacking the JRE...
Extracting the installation resources from the installer archive...
Configuring the installer for this system's environment...
awk: error while loading shared libraries: libdl.so.2: cannot open shared object file: No such file or directory
dirname: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
/bin/ls: error while loading shared libraries: librt.so.1: cannot open shared object file: No such file or directory
basename: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
dirname: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
basename: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
hostname: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
Launching installer...
grep: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
/tmp/install.dir.17655/Linux/resource/jre/bin/java: error while loading shared libraries: libpthread.so.0: cannot open shared object file: No such file or directory
If i activate the LAX_DEBUG environment variable i get
oracle@bottrop:~/tmp/setup/linux_i386> LAX_DEBUG=TRUE ./setup.bin
Preparing to install...
Checking for POSIX df.
Found POSIX df.
Checking tail options...
Using tail -n 1.
True location of the self extractor: /home/oracle/tmp/setup/linux_i386/setup.bin
Creating installer data directory: /tmp/install.dir.17799
Creating installer data directory: /tmp/install.dir.17799/InstallerData
Gathering free-space information...
Space needed to complete the self-extraction: 620529 blocks
Available space: 162608560 blocks
Available blocks: 162608560 Needed blocks: 620529 (block = 512 bytes)
Computed number of blocks to extract: 1025
Extracting the JRE from the installer archive...
Extracting JRE from ./setup.bin to /tmp/install.dir.17799/Linux/resource/jre_padded ...
Extracting done, exit code = 0
Extracting JRE from /tmp/install.dir.17799/Linux/resource/jre_padded to /tmp/install.dir.17799/Linux/resource/vm.tar.Z ...
Extracting done, exit code = 0
Unpacking the JRE...
Unpacking the JRE...
gzip is /usr/bin/gzip
GZIP done.
TAR done.
Extracting the installation resources from the installer archive...
Extracting install.zip from ./setup.bin to /tmp/install.dir.17799/InstallerData/installer.padded ...
Extracting to padded done, exit code = 0
Extracting from padded to zip done, exit code = 0
Creating disk1 data directory: /tmp/install.dir.17799/InstallerData/Disk1
Creating instdata data directory: /tmp/install.dir.17799/InstallerData/Disk1/InstData
Extracting resources from ./setup.bin to /tmp/install.dir.17799/InstallerData/Disk1/InstData/Resource1.zip ...
Extracting done, exit code = 0
Configuring the installer for this system's environment...
========= Analyzing UNIX Environment =================================
Setting UNIX (linux) flavor specifics.
Importing UNIX environment into LAX properties.
Checking for POSIX awk.
========= Analyzing LAX ==============================================
LAX found............................ OK.
LAX properties read.................. OK.
========= Finding VM =================================================
Valid VM types.......................... J2
Absolute LAX_VM path.................... /tmp/install.dir.17799/Linux/resource/jre/bin/java
Expanded Valid VM types................. JRE_J2 JDK_J2
* Using VM.....(lax.nl.current.vm)...... /tmp/install.dir.17799/Linux/resource/jre/bin/java
checking for NPTL + JVM vulernability...
NPTL detected! checking for vulnerable JVM....
awk: error while loading shared libraries: libdl.so.2: cannot open shared object file: No such file or directory
major :
minor :
patch :
vendor:
Vulnerable JVM detected... implementing workaround
========= Virtual Machine Options ====================================
LAX properties incorporated............. OK.
classpath............................... "/tmp/install.dir.17799/InstallerData:/tmp/install.dir.17799/InstallerData/installer.zip"
main class.............................. "com.zerog.ia.installer.Main"
.lax file path.......................... "/tmp/install.dir.17799/temp.lax"
user directory.......................... "/tmp/install.dir.17799"
stdout to............................... "console"
sterr to................................ "console"
install directory....................... ""
JIT..................................... none
option (verify)......................... off
option (verbosity)...................... none
option (garbage collection extent)...... none
option (garbage collection thread)...... none
option (native stack max size).......... none
option (java stack max size)............ none
option (java heap max size)............. 50331648
option (java heap initial size)......... 16777216
option (lax.nl.java.option.additional).. none
dirname: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
/bin/ls: error while loading shared libraries: librt.so.1: cannot open shared object file: No such file or directory
basename: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
dirname: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
basename: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
========= Display settings ===========================================
hostname: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
X display............................... remote
WARNING: The name of this host () and the setting
of this shell's DISPLAY (localhost:10.0) variable do not match.
If this launcher is being displayed to a Microsoft Windows desktop
through X Windows the Java Virtual Machine might abort. Try running
this installer locally on the target system or through X Windows to
another UNIX host if the installer unexpectedly fails.
UI mode................................. gui
Launching installer...
========= VM Command Line ============================================
options: -Djava.compiler=NONE -Xmx50331648 -Xms16777216
CLASSPATH:/tmp/install.dir.17799/InstallerData:/tmp/install.dir.17799/InstallerData/installer.zip:
grep: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
========= Forking JAVA =============================================
/tmp/install.dir.17799/Linux/resource/jre/bin/java: error while loading shared libraries: libpthread.so.0: cannot open shared object file: No such file or directory
Did not found any information/help about this issue! Can somebody help?i am getting the same thing but with my ipad. i've successfully downloaded the siriusxm internet radio app to my iphone, but i can't to my ipad. just like you, the app is greyed out on my ipad. any suggestions?
-
Issue while installing ODI 11.1.1.6 with JDK 7u
Hi All,
I am working on installing ODI on windows 64 bit. I downloaded lastest web logic server files, ODI files and JDK files from oracle site..
I installed Web Logice server with no errors but when I tried to install ODI by running the setup.exe it was giving me an error:
"Error: Provide the JDK/JRE Location while launching the installer. Invoke the sertup.exe with -jreLoc <JDK/JRE Location absolute path>Parameter(s)".
So, I looked in to JDK file and noticed that it is an old file and need to be updated so I installed "jdk-7uf-windows-i586.exe". After installing when I try to setup ODI, I am still getting the same error..
It is asking me to provide the location but I am not srue where to provide the location.. I know the location for JDK i.e. C:\Program files\Java\jdk1.7.0_04 but I am not sure where to provide this location for ODI..
Thanks a lot!2 things must be noticed:
First: ODI 11g is not supported by JDK 7, I always use the JDK1.6.0_27 and works fine. When you try to open the ODI Studio, this message appears, telling that ODI is supported only with JDK 6 versions, so don't try to use JDK 7.
Second: I always install the JDK in a path without spaces, like "C:\JDK1.6.0_27\" and the excatly same thing to odi install files. So I call via Command Prompt:
C:\ODI_INSTALL\Disk1\setup.exe -jreLoc C:\JDK1.6.0_27\
I did over 20 windows installations using these settings, it'll work perfectly.
Regards.
Luiz Araujo -
Installing ODI Studio and ODI Stand-alone on 64 bit Windows 7
Can anybody tell me which ODI downloads I need in order to install ODI Studio and ODI Stand-alone on my 64-bit Windows 7 machine?
I've already created the DB repository with RCU, but I'm having trouble with the ODI installation: I just spent an hour and a half downloading 2.5GB of installers that turned out to be wrong - the SETUP.EXE complained that it was a 32 bit installer and wouldn't work on 64 bit Windows - so I now need to find a 64-bit installer instead (another 2.5GB presumably...). Not sure which of the multiple download options to choose and I don't want to spend all day waiting for the wrong files to download again.
Looking through OTN and the (typically confusing) Oracle installation docs, there's a load of stuff about using 32-bit JREs on 64-bit Windows to get around 64/32-bit Java problems later on, or lots of stuff about all the Fusion requirements etc. But I don't want the JEE stuff (I already have about 4 different WebLogic installations because every time I install any Oracle "Fusion" stuff it slaps another WebLogic in there as well), and I'm miles away from getting any Java runtime problems with ODI when I can't even figure out the right installer to use for 64 bit Windows.
Maybe it's just me: every time I try to install any of Oracle's server products (apart from the RDBMS itself), I end up wading through endless lists of cross-linked installation pre-requisites and searching OTN forums for the single secret combination of installer/JDK/JRE/operating system/database character-set/RDBMS version and desperate prayers to minor deities that will permit the installation to go ahead...
So any help will be gratefully received!You will have to download ODI with the download option "for All Platforms" from http://www.oracle.com/technetwork/middleware/data-integrator/downloads/index.html
-
Error while Installing ODI 11.1.1.6
Hi All
We are using windows 2008 Server 64 bit , Installed Hyperion 11.1.2.2 64 bit , In that i am trying to Install ODI 11.1.1.6 for that i had downloaded Jdk-6u33-Windows-x64
Once download is done , In command prompt i tried to run set.exe
These are the paths i had tried for Installation of ODI in command prompt
1.C:\ODI_11G_64BIT\DISK1\setup.exe - JreLoc C:\Program Files\Java\jdk1.6.0_33
2.C:\ODI_11G_64BIT\DISK1\setup.exe - JreLoc C:\Oracle\Middleware\jdk160_29
"Preparing to launch Oracle Universal Installer from C:\Users\*. Please wait ...
Please specify JDK location ( Ex. /home/jdk ), <location>/bin/java should exist:"
I had tried 32 bit java also it also did not work.
i am getting above message its not runing
ThanksTry launching installer from location disk1\install\win64\setup.exe & provide JRE path as C:\Oracle\Middleware\jdk160_29 (As it does not have spaces, which may be causing the issue)
Regards,
Santy -
How to install ODI Planning Adapter
Hi Friends,
One of my client is trying to install the ODI Planning Adapter. After unzip of the file we have two folders: Drivers and impexp. I recall that we are supposed to copy the contents of these folders somewhere but I cannot find documentation and what I should do.
Can anyone suggest on how to instal planning adapter.I searched for documentation in odiap_93110_readme.pdf I don't see instruction on how to install the ODI planning adapter.
If anyone can give me a step by step procedure to instal planning adapter it would be great help.
Regards.Hi All,
I am new to oracle BI space . i need to load data from my flat file source to hyperion planning 9.3.0.1 application.
Here are the steps i followed:
downloaded and installed ODI 10.1.3.4.
i could find the adpater for hyperion planning 9.3.0.1 for ODI.
Can somebody please help me out and tell me where the above mentioned installation file is located in internet.please share the location...
Some how or the other i could able to find the odiap_93110.pdf file which lets me to know about installation instructions.
Thanks & Regards,
Lokesh -
To run and work on AIX server installed ODI
Hi all,
As I was working on ODI till the date in window o/s of my desktop.
But now I have to work on AIX server I need to know
* Is there any difference to work on ODI while I am using AIX
plz provide me necessary information..
* Will working methodology of Desiner and Topology manager be same in AIX
* is it console based or I'll have the same UI I've not worked on AIX before
*Any other info, if you tech people have regarding basic differences between
Window installed ODI and AIX installed ODI then plz provide me.
thanx and regards
Palash ChatterjeeHello,
There should be no difference in behavior.
- All Graphical UIs are in Java and work the same on AIX.
- The installer works also on AIX.
- The only differences will be that instead of having .bat script files, you'll have .sh (unix shell) files to start the components, and that you cannot use windows services.
Just give it a try, and you'll see.
Regards,
-FX -
Hi All,
When installing ODI, it is giving error at very beginning of the installation. I am using Oracle Data Integrator 11gR1 (11.1.1.6.0)
C"\Temp\Disk1>setup.exe -jreLoc C:\Program Files (x86)\Java\jre6
Starting Oracle Universal Installer...
Checking if CPU speed is above 300 MHz . Actual 2494 MHz Passed
Checking swap space: must be greater than 512 MB . Actual 10471 MB Passed
Checking monitor: must be configured to display at least 256 colors Higher than
256 . Actual 4294967296 Passed
Preparing to launch Oracle Universal Installer from C:\Users\abc\AppData\Local\Temp\OraInstall2012-08-28_03-28-59AM. Please wait ...
The JavaRuntime Environment was not found at C:\Program\bin\javaw.exe
I did google and found that because of space in absolute path, it is giving an error. Is there any workaround?ODI wont take java path having space (Program Files).
Try to install java in a path having without space like C:\Java\Java\jdk_1.6.33
After this use below command
C:\Temp\Disk1>setup.exe -jreLoc C:\Java\Java\jdk_1.6.33 -
Need to install ODI studio and ODI sdk(Developer Installation)
HelloHi every one,
Can any one suggest me in brief, how to install them, and also what are the things that I need to do before installing them, And where do I get them.
can you give me the brief guidance.
configuration:- Windows XP service pack 3 processor:-i7 , RAM-3.22GB.
Thanks,
KarthikThe pre-requsites for installing ODI is
1) supportable RDBMS 2) JDK (preferably version less than 7) you can search for ODI support matrix to get the exact supportable versions.
for downloading them goto https://edelivery.oracle.com/ (you can use the same oracle acct that you have for this discussion forum)
ODI installations are of two types:
1) Standalone installation (check boxes : ODI Studio, SDK, Standalone Agent while installation) (you can refer to any of the ODI blogs which will have a step by step process of installing ODI)
2) Java EE installation (integration with Oracle Web-logic server/[IBM websphere as well if ODI 11.1.17]) this requires a webserver to be installed before installing ODI.
Thanks,
Parasuram -
I have the following on 11.1.2:
Box1: Foundation, Planning
Box2: ERPI
I want to load data from the GL into Planning using ERPI. My question is where do I install ODI ? On Box3, the ERPI box? or Box 1, the Planning box?
Also can I use an ODI Server which has been setup on another box?As long as the essbase client is installed on the server here you are trying to access Essbase from then that is all that is required. Regardless of where the main ODI install is located you could always have an ODI agent installed on the Essbase server and just make sure that all ODI jobs/scenarios interacting directly with Essbase execute via that agent.
-
Installing ODI 11 on a single server Hyperion 11.1.2.1 environment
We have a single server Dev EPM (Hyp 11.1.2.1) environment (HP, HPCM, HFM, FDM), which is working over all fine. We now would like to use ODI for data and metadata loads. Our plan is to install ODI 11.1.1.6 on the same server where we have the above full EPM stack installed/Configured already. I did a quick study online before attempting ODI, below are the challenges I am facing.
1. I believe ODI requires Weblogic, hence tried to extend or create a new weblogic domain with the already exsiting weblogic installation of EPM. However weblogic create/extend domain screen does not have ODI in the list of "supported products"?
2. Do I need to install a fresh copy of weblogic to be able to install ODI or can I use the existing weblogic installation?
Kindly share your thoughts and experiences in this regard.959658, Thanks for your comments.
I tried it and it throws the below error/message
INST-07247: Specified Middleware home location is either not valid or missing
enter a valid Middleware home location
I get this error only if I choose to install J2EE Components. I read some docs and understand that J2EE components are primarily used for HA and clustering, apart from this is there anything other major functionality that J2EE components provide? Just want to see what is it that we will miss if we choose to go without J2EE for now given it is a Dev environment.
When you say you were able to proceed with existing installation of weblogic, did you extend or create a weblogic domain to support ODI? cause it looks like the existing EPM weblogic domain does not support ODI.
Regards
JamesO -
Install ODI 10g on 64 bit Windows 2008 server
Can we install ODI 10g on 64 bit Windows 2008 server ? if so Please provide the me the link for download
Edited by: user1137989 on Oct 27, 2010 10:51 PMIf you are looking for 10g then scroll down in the link (http://www.oracle.com/technetwork/middleware/data-integrator/downloads/index.html) Oracle Data Integrator 10g (10.1.3.5.0) and select for Microsoft Windows (x86) and extract and install .
11g comes in 32 and 64 bit version .
32 bit version is
Oracle Data Integrator 11g (11.1.1.3.0)
for Microsoft Windows (x86)
64 bit version is .
Oracle Data Integrator Companion 11g (11.1.1.3.0)
for All Platforms
Hope this helps . -
How to check whether installed ODI is 32 bit or 64 Bit ?
Hi,
As client do not have proper installation documents and all details on their side,I was trying to check whether installed ODI is 32 bit or 64 Bit on machine.
How would i be able to do the same ?
We have "Standalone Edition Version 11.1.1 Build ODI_11.1.1.3.0_GENERIC_100623.1635" installed on our Windows Server 2003 Machine.
Thanks,
MaheshHi Mahesh,
as far as I know, there was only a 32 bit version of ODI 11.1.1.3.
Regards,
Jens -
Kindly provide me how to install odi in my pc windows 7 64bit
Hi all,
Plz kindly provide me how to install odi in my lap windows 7 64bit and do we have option to install odi in windows7?
In windows 7 i already installed oracle 10g database and downloading ODI 11.1.1.5.0 version from oracle site.
Its a urgent process to me and thanks in advance and guide me .Hi,
for Windows x64 be aware of these pitfalls:
- you need the "generic" Java version of ODI, not the Windows one (which target x86)
- you need a 64 bit Java Virtual Machine to run the setup
- you need a 32 bit Java Virtual Machine to run the application (ODI Studio) after installation complete
I used JRockit (Java Virtual Machine), and with default settings the JRockit installer overwrite previous installations, even for different processor architecture (ie 32 bit installation overwrite 64 bit).
So to me the following worked:
- Install JRockit 64 bit
- Run ODI installation
- Install JRockit 32 bit
- Run ODI Studio.
Hope it helps,
Corrado
Maybe you are looking for
-
Supporting BW 3.5 and BI 7.0 Web Reports in NW04s Portal
Hi All, I have been able to identify any documentation confirming that web reports from both BW 3.5 and BI 7.0 can be supported within the same portal. Can someone please point me to documentation supporting this solution? Or, provide me with furth
-
Saving data next time PDF form opens
Hello, I've been looking all over. Where is the command to disable the feature that allows the previously entered data to be saved? I have the form on our server and don't want users to see data from other users. Right now they can. Thank you.
-
Hi, Firstly, this is my first post here to apologies if it is in the wrong area. Basically, I've just finished and am awaiting results of a degree in Computer Networking. In the meantime, I would like to gain the CCNA certification. I have looked aro
-
E90 doesn't work as a modem on vista64 ...
Hello, I am now working for more than 2 days getting the E90 working as a usb or bluetooth modem on my notebook. OS is Vista64 SP1. I read all the threads on every bbs I could find on the web refering to this subject but no success so far. I re-insta
-
No bookmark tool, no save & quit feature
Firefox 4 just closes & doesn't 'Save & Quit' which is a feature I WOULD LIKE RETURNED PLEASE!!!!! Also the bookmarking section is rubbish ..you now have to scroll 3 windows to get to the 'Bookmark this page' instead of just one click down. What MORO