Installing ODI 11 on a single server Hyperion 11.1.2.1 environment

We have a single server Dev EPM (Hyp 11.1.2.1) environment (HP, HPCM, HFM, FDM), which is working over all fine. We now would like to use ODI for data and metadata loads. Our plan is to install ODI 11.1.1.6 on the same server where we have the above full EPM stack installed/Configured already. I did a quick study online before attempting ODI, below are the challenges I am facing.
1. I believe ODI requires Weblogic, hence tried to extend or create a new weblogic domain with the already exsiting weblogic installation of EPM. However weblogic create/extend domain screen does not have ODI in the list of "supported products"?
2. Do I need to install a fresh copy of weblogic to be able to install ODI or can I use the existing weblogic installation?
Kindly share your thoughts and experiences in this regard.

959658, Thanks for your comments.
I tried it and it throws the below error/message
INST-07247: Specified Middleware home location is either not valid or missing
enter a valid Middleware home location
I get this error only if I choose to install J2EE Components. I read some docs and understand that J2EE components are primarily used for HA and clustering, apart from this is there anything other major functionality that J2EE components provide? Just want to see what is it that we will miss if we choose to go without J2EE for now given it is a Dev environment.
When you say you were able to proceed with existing installation of weblogic, did you extend or create a weblogic domain to support ODI? cause it looks like the existing EPM weblogic domain does not support ODI.
Regards
JamesO

Similar Messages

How to Install XI and EP on Single server

Hi,
How to install XI and EP on same server. I tried to install XI then EP . After EP installed then iam not able to access XI j2ee engine . I think some where port conflicts . I gave system number for XI : 00 and EP : 02
Can any one help for this. Where did i made mistake.
Thanks
Kristene

Hi Kristene,
I have installed XI and EP on the same server (for test purposes) without any problems, so it should be possible. I installed them in a different order (first EP then XI), but I don't think that matters much.
The only real difference is that I kept the system number the same.
What do you mean exactly with not being able to access the XI j2ee engine? How did you try to access it?
Regards,
Martin

Can we install Dev and QA in Single Server

hi
Now we r going to sizing the BW System.
we getting data only fro HR,FI,CO and MM
Can we installed the BW Dev and QA in one server
Do we need have seperate serversfor each of them
Total concurrent of users would be 25
Can anyone help me out
Thanks

linda,
you can indeed have the servers in the same servers - there is a name for this - it is called MCOD - multiple components in one database , you can either look at having different DB for the above or sharing the same DB , it will be a matter of server sizing thats all and configuring the transport connections.
On an average assume 300MB (150 App + 150 DB) of RAM per concurrent users.
also have a look at service.sap.com/sizing....
Arun
Assign points if it helps..

Single Server VDI?

I'm just getting started with VDI and wish to install all services on a single Hi Spec server.
The idea is to push it out to about 10 users within the organisation who need a bit of extra processing power for certain applications.
Can I install all required VDI services onto one machine??

Hi Ronnie,
Thank you for post in Windows Server Forum.
You can able to build one VDI environment on one box; not more than one. The reason for this is because we cannot install Hyper-v inside Hyper-V on virtual machine. Hyper-V role can only be installed on physical machine.
You can install Hyper-V role on physical server and then install DC on one virtualized VM and RDS role on another one. Then add the Hyper-V server on your physical box to the domain, preferably through an internal network. Make sure to configure the DC VM to
start automatically when your Hyper-V box starts.
Please check below video for guide:
How to install Microsoft VDI on a single server
http://technet.microsoft.com/en-us/video/how-to-install-microsoft-vdi-on-a-single-server.aspx
Hope it helps!
Thanks,
Dharmesh

Multiple SAP instance on single server.

Hello Experts.
We are in process of implementaing SAP solution withLandscpe having systems ECC 6.0, SolMan 4.0, BI. We are planning to have 3 Sytem landscape for all.
Now but currently we are having only one Physical server
Is it possible to Install 6 SAP system on single server?(DEV and QAS for ECC, Solman, BI respectively). The server is having sufficient hardware for 6 system as per sap standered. Planne OS is RHEL and DB MaxDB. Initially we are having 16 GB RAM extendable.
Will SAP support such kind of landscape?

Hello,
We did not put 6 systems on the same server but we are running fine with 4 systems (R/3, XI, BI) on one server (8 itanium, 32 GB ram).
16 GB seems very small for 6 systems...
Don't forget that beside the obvioous economy, they are also big cons with mutualization.
When the server crashes because of a hardware failure, all of your landscape is out and the phone rings a lot.
When you need a reboot for one system, you have to stop all the others...
Good luck !
Regards,
Olivier

Install 11.1.2.4 on a single server for testing

I am not sure if anyone has installed 11.1.2.4 on a single server. If so can you please assit me. We are trying to consolidate some servers and would like to use a single server for testing of 11.1.2.4. Can this be done? Has anyone done this sucessfully or have any documents on how to do it on a single server.
Any input would help

If you are just looking for a quick environemnt to use for testing, and are not worried about the actual installation process, this might be useful:
Hyperion Error of the Day: EPMVirt: Oracle Hyperion 11.1.2.4 Virtual Environment
Nick

Install AD / SQL Server 2012 and SharePoint 2013 on a single server as Development Environment

Hi All,
I'm planning to prepare a SharePoint 2013 development environment. The current idea is to install Domain controller, SQL Server 2012 and SharePoint 2013 all on a single server. Even though this is for development purposes,
would there be any limitations specially when it comes to SP 2013 functionalities according to your experience?
Some articles i referred.
http://sharepoint-tutorial.net/post/2012/07/18/install-sharepoint-2013-domain-controller.aspx
http://social.technet.microsoft.com/Forums/en-US/f438c9a6-02e8-43d3-9963-7a0608f0b961/sharepoint2013-on-domain-controller
Thanks,
Dilip

Hi
i understand this is a sandbox environment but you should be able to install everything.
http://sharepoint-tutorial.net/post/2012/07/18/install-sharepoint-2013-domain-controller.aspx
Hope this helps. Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Steps to Install oracle 11g client 32 Bit,64 Bit in a single server

Hi,
I have a requirement to Install Both "Oracle Client 11.2.0.2 Win32" and "Oracle Client 11.2.0.2 Win64" on a single server.
Please provide the step by step instruction for the above requirement.
Environment
Windows Server 2008 R2 64Bit.
Thanks
Sambit

Just use separate base directories e.g.
c:\32bit\oracle and
c:\64bit\oracle
Install the 32-bit client first, then the 64-bit client. The order should not matter.
WINDOWS: Install Oracle Client 11.2 32-bit and 64-bit on Same System Overwrites Programs Menu Entry [ID 1243374.1]
How To Install Both 32-bit and 64-bit ODP, OLEDB, And ODBC Oracle Software on 64-bit Windows [ID 795602.1]
HTH
Srini

How to install multiple E-Business Suite in a single server?

Hello,
I read somewhere that we can install multiple E-Business Suite in a single server as long as the storage is enough, is it true? If yes do any of you can give me the steps to install it or refer me to a link? I'd searched here but couldn't find it, hope that I didn't miss something. What I want to do is install Vision database and another one is fresh install for testing, both in a single server. There will be about 20 people accessing that system. What kind of hardware must I use? Thanks.

If you want to run 2 instances concurrently, It would be safe to assume you want 8 GB of RAM plus enough storage to host both instances, backups, archive logs, patches etc. For CPU, most entry level servers can be single, dual or quad socket, or CPU socket. Most CPUs are dual core, meaning there are 2 physical CPU cores in each socket. So if you get a 2 socket dual core server, you see 4 physical CPUs on the operating system. If you get a 4 socket dual core server, you see 8 physical CPUs. If you want to run R12 applications, you will definately need 4 GB of ram per instance (E-Business Suite installation). 11i might get by on 3 GB of ram per instance.

Should I install Print Services as a role for a single server env no domain

I have a OAS application using converted UNIVERSE code to work with withSQL server. The application works fine and local users and groups will do the job. I have been tasked with replacing UNIX based printing to Windows based printing. Don't need LDP services
either. Does it make sense to install print services for about 30-40 printers or just set them up local. There will be about 10 different forms and i will have to be able to re-direct jobs, pause jobs, re-queue jobs, and disable\enable the printers.
I don't know that version 3 or 4 printer drivers matter because the same printer driver will be used for a majority of print jobs. As a matter of fact there are 5 or 6 different drivers needed. This is setting on a 100 MB backbone with GB access to the server.

Hi,
Print Services enables you to share printers on a network and centralize print server and network printer management tasks by using the Print Management snap-in.
Print Management helps you monitor print queues and receive notifications when print queues stop processing print jobs. It also enables you to migrate print servers and deploy printer connections by using Group Policy.
Print Services Role
http://technet.microsoft.com/library/cc732378(WS.10).aspx
I’m not quite clear about your current provisioning, as referred in the title, for single server without domain. I think this role is not necessary for you.
Hope this helps.

To run and work on AIX server installed ODI

Hi all,
As I was working on ODI till the date in window o/s of my desktop.
But now I have to work on AIX server I need to know
* Is there any difference to work on ODI while I am using AIX
plz provide me necessary information..
* Will working methodology of Desiner and Topology manager be same in AIX
* is it console based or I'll have the same UI I've not worked on AIX before
*Any other info, if you tech people have regarding basic differences between
Window installed ODI and AIX installed ODI then plz provide me.
thanx and regards
Palash Chatterjee

Hello,
There should be no difference in behavior.
- All Graphical UIs are in Java and work the same on AIX.
- The installer works also on AIX.
- The only differences will be that instead of having .bat script files, you'll have .sh (unix shell) files to start the components, and that you cannot use windows services.
Just give it a try, and you'll see.
Regards,
-FX

Install ODI 10g on 64 bit Windows 2008 server

Can we install ODI 10g on 64 bit Windows 2008 server ? if so Please provide the me the link for download
Edited by: user1137989 on Oct 27, 2010 10:51 PM

If you are looking for 10g then scroll down in the link (http://www.oracle.com/technetwork/middleware/data-integrator/downloads/index.html) Oracle Data Integrator 10g (10.1.3.5.0) and select for Microsoft Windows (x86) and extract and install .
11g comes in 32 and 64 bit version .
32 bit version is
Oracle Data Integrator 11g (11.1.1.3.0)
for Microsoft Windows (x86)
64 bit version is .
Oracle Data Integrator Companion 11g (11.1.1.3.0)
for All Platforms
Hope this helps .

Possible to install 10gAS on single server?

Hi, I'm not entirely new to AS. I have worked with 9iAS for a couple years. In the environment I was in, we setup an infrastructure server and a mid-tier server. I'm interested in tinkering with 10gAS, but don't have two servers to play with. Is it possible to install 10gAS on a single server? I found an installation guide on a "basic install" but wasn't sure if that was it or not. Also, I could not tell that it would have all of the features, such as portal.
Thanks for you help.
Brad

Hi Brad,
You can install a 10g mid-tier (including Portal and all other features) and an
Infrastructure on the same host. There is information on this sprinkled
throughout the Installation Guide, such as:
Sys Reqs:
http://download.oracle.com/docs/cd/B14099_19/win.1012/install.1012/install/reqs.htm#sthref72
Where to Install: http://download.oracle.com/docs/cd/B14099_19/win.1012/install.1012/install/basic.htm#sthref260
Starting and Stopping Tip:
http://download.oracle.com/docs/cd/B14099_19/win.1012/install.1012/install/basic.htm#CHDDBJAG
Actually, the best thing to do would be:
(1) Locate the Installation Guide for your platform here:
http://download.oracle.com/docs/cd/B14099_19/getstart.htm
(2) Open the PDF
(3) Search for "multiple instances"
Hope this helps,
Beth

Install ODI on SQL server 2005

Hi,
I got a problem to install ODI in SQL 2005 Express.
I have notebook to install SQL 2005 Express version.
When I config Master repository, I copy SQL 2000 drivers ("msbase.jar","mssqlserver.jar","msutil.jar")
during configuration, it found following error.
"The incoming tabular data stream (TDS) remote procedure call (RPC) protocol stream is incorrect. Parameter 1 ("")"
Please help to fix the problem. Thanks
For more information,
I try to copy SQL 2005 driver "sqljdbc4.jar" and "sqljdbc.jar" on C:\OraHome_1\oracledi\drivers
However, I got no response when I click OK but Test connection is ok.
I try to change the driver to "com.microsoft.sqlserver.jdbc.SQLServerDriver" instead of "com.microsoft.jdbc.sqlserver.SQLServerDriver" but still got no response.
Edited by: user070322 on May 2, 2009 8:33 PM

Hi All,
I found that it is required to use SQL 2005 JDBC version 1.2.
2.0 and 1.1 is not working for repository setup.
thanks all.

Installing ODI Studio and ODI Stand-alone on 64 bit Windows 7

Can anybody tell me which ODI downloads I need in order to install ODI Studio and ODI Stand-alone on my 64-bit Windows 7 machine?
I've already created the DB repository with RCU, but I'm having trouble with the ODI installation: I just spent an hour and a half downloading 2.5GB of installers that turned out to be wrong - the SETUP.EXE complained that it was a 32 bit installer and wouldn't work on 64 bit Windows - so I now need to find a 64-bit installer instead (another 2.5GB presumably...). Not sure which of the multiple download options to choose and I don't want to spend all day waiting for the wrong files to download again.
Looking through OTN and the (typically confusing) Oracle installation docs, there's a load of stuff about using 32-bit JREs on 64-bit Windows to get around 64/32-bit Java problems later on, or lots of stuff about all the Fusion requirements etc. But I don't want the JEE stuff (I already have about 4 different WebLogic installations because every time I install any Oracle "Fusion" stuff it slaps another WebLogic in there as well), and I'm miles away from getting any Java runtime problems with ODI when I can't even figure out the right installer to use for 64 bit Windows.
Maybe it's just me: every time I try to install any of Oracle's server products (apart from the RDBMS itself), I end up wading through endless lists of cross-linked installation pre-requisites and searching OTN forums for the single secret combination of installer/JDK/JRE/operating system/database character-set/RDBMS version and desperate prayers to minor deities that will permit the installation to go ahead...
So any help will be gratefully received!

You will have to download ODI with the download option "for All Platforms" from http://www.oracle.com/technetwork/middleware/data-integrator/downloads/index.html

Installing ODI 11 on a single server Hyperion 11.1.2.1 environment

Similar Messages

Maybe you are looking for