Installing ODI agent
Hi,
I have installed complete ODI 10.1.3.6 on a server "A". I am now trying to install just the ODI agent on server "B" and use the server "A" repositories. This is for using Hyperion ERPi which requires at least ODI agent to be installed on the machine where ERPi is installed.
I installed the agent on server B. But dont see ODIParams.bat file and I am not sure how to get the agent running.
Regards,
Ragav.
odiparams.bat file will be in a a path similat to "\oracle\product\11.1.1\Oracle_ODI_1\oracledi\agent\bin". Note that bin directory is under agent directory.
Similar Messages
-
QUESTION: Essbase data extraction and Installing ODI Agent??
For extracting data from Essbase cubes, ODI has "LKM Hyperion Essbase DATA to SQL".
We can use (1). ReportScript, or (2). MDX-query, or (3). CalcScript
For data-extraction using CalcScript, ODI Agent must be running on the same server as the Essbase server.
Does anyone know if there is a need for ODI Agent on the Essbase machine if we use MDX-query method for data-extraction?
We would like to avoid installing ODI Agent for Essbase data-extraction.
.Thanks John.
One related question. To move data from one Essbase cube to another Essbase cube using ODI Interface, Can we do it efficiently through MDX-query?
We want to avoid Replicated-partitioning OR CalcScripts, if possible.
BTW... Your ODI/Hyperion blog is a bible for us. -
Hello!
I use EPM 11.1.2.1.0, ODI 11g, Solaris SPARC
The situation is as follows:
On a single server X is installed Hyperion Essbase, on another server (Y) - the application server (Hyperion Planning, Shared Services, etc.), the third (Z) - ODI
In Oracle Data Integrator creates the following packages:
1) Load the actual values from the Oracle DWH to Hyperion Essbase and execution of business rules using the Hyperion Planning console utility - CalcMgrCmdLineLauncher.sh
2) Extract planning values from the Hyperion Essbase to Oracle DWH, using KM - LKM Hyperion Essbase Data to SQL, which is specified EXTRACTION_QUERY_FILE - report script Essbase.
My question is, do I need to install ODI agents on both servers: X and Y. On Y must be exactly as it is called a command line utility, located on the hyperion planning server. Be sure to install the agent on the server X, where Essbase. (called report script)
If I need the agents on both servers, I can somehow relate them so as not to break the existing chain of steps in the ODI package?If it is the report script extract then it should still work even if there is no agent on the essbase server.
An agent will be required on the running the calc manager utility though.
Even if you did multiple agents you can generate a scenario for each step and call the scenarios from a package.
Cheers
John
http://john-goodwin.blogspot.com/ -
Being new to ODI, I have some simple questions.
ODI server is installed on Windows-2008 machine. Its repository is on MS-SQL-Server database which is also on a Windows-2008 machine.
A non-ODI process is creating files on a Unix server, which needs to be picked up by ODI and loaded into a MS-SQL-Server table.
*(Q 1):* Do we need to install ODI Agent on Unix, so that ODI can "see" the unix files? OR is there another simpler way??
*(Q 2):* Is there an Oracle link about installing ODI11g Agent on Unix? I only see documents talking about installing ODI Agent on Windows.
*(Q 3):* What minimum ODI components need to be installed on Unix, so that ODI Agent runs on Unix?Nasar Ali-Khan wrote:
Being new to ODI, I have some simple questions.
ODI server is installed on Windows-2008 machine. Its repository is on MS-SQL-Server database which is also on a Windows-2008 machine.
A non-ODI process is creating files on a Unix server, which needs to be picked up by ODI and loaded into a MS-SQL-Server table.
*(Q 1):* Do we need to install ODI Agent on Unix, so that ODI can "see" the unix files? OR is there another simpler way??
You need to install ODI agent on Unix or go for accessing UNIX file from WINDOWS application eg Samba
*(Q 2):* Is there an Oracle link about installing ODI11g Agent on Unix? I only see documents talking about installing ODI Agent on Windows.
The Agent installation process is basically same
*(Q 3):* What minimum ODI components need to be installed on Unix, so that ODI Agent runs on Unix?Go for AGENT only installation
Thanks,
Sutirtha -
Managing ODI Agent through OPMN - Install Issue
Hi
I am attempting to set up my ODI agent so that I can manage it through my OPMN service but I keep getting an error "java is not recognised as an internal or external command, operable program or batch file" when I run the command "odi_opmn_addagent.bat agentcreate.properties".
I have installed EPM 11.1.2.2 and my essbase service is currently managed through the OPMN.
I have updated the odiparams, agentcreate.properties and odi_opmn_addagent.
In the agentcreate file I set my JAVA_HOME to E:\Oracle\Middleware\jdk160_29
Any ideas what could be wrong?
Thanks
MCopy your jdk path as given below. Change it if you have different.
C:\Program Files\Java\jdk1.6.0_33\bin
Right click on my computer->go to properties->advanced system setting->environmental variable->system variables
Scroll down. you will get a variable names as "Path"
Double click on it. then single click on variable value. Then press home key in your keybord. (better take backup of it)
now pest above code that is C:\Program Files\Java\jdk1.6.0_33\bin;
Give a semicolon at the end as i have given. Click ok,ok,ok
Now go to cmd and type javac. let me now the output. -
Need to install ODI studio and ODI sdk(Developer Installation)
HelloHi every one,
Can any one suggest me in brief, how to install them, and also what are the things that I need to do before installing them, And where do I get them.
can you give me the brief guidance.
configuration:- Windows XP service pack 3 processor:-i7 , RAM-3.22GB.
Thanks,
KarthikThe pre-requsites for installing ODI is
1) supportable RDBMS 2) JDK (preferably version less than 7) you can search for ODI support matrix to get the exact supportable versions.
for downloading them goto https://edelivery.oracle.com/ (you can use the same oracle acct that you have for this discussion forum)
ODI installations are of two types:
1) Standalone installation (check boxes : ODI Studio, SDK, Standalone Agent while installation) (you can refer to any of the ODI blogs which will have a step by step process of installing ODI)
2) Java EE installation (integration with Oracle Web-logic server/[IBM websphere as well if ODI 11.1.17]) this requires a webserver to be installed before installing ODI.
Thanks,
Parasuram -
Do we need a ODI agent to be running for using the startscen command
Do we need a ODI full installation(both server and client) for using the Startscen command or just the client install should be enough. And also do we need a ODI agent to be configured and running for using this StartScen command
ThanksODI client is an agent.
So you don't need to declare one more if not needed on your infrastructure.
But to run odistartscen you need to configure the odiparams.bat with your repository connexion.
If not it will try to connect by default to the demo repostory on HSQL.
best regards,
Brice -
I have the following on 11.1.2:
Box1: Foundation, Planning
Box2: ERPI
I want to load data from the GL into Planning using ERPI. My question is where do I install ODI ? On Box3, the ERPI box? or Box 1, the Planning box?
Also can I use an ODI Server which has been setup on another box?As long as the essbase client is installed on the server here you are trying to access Essbase from then that is all that is required. Regardless of where the main ODI install is located you could always have an ODI agent installed on the Essbase server and just make sure that all ODI jobs/scenarios interacting directly with Essbase execute via that agent.
-
Dear All,
While starting ODI agent,its failing with the below error
2011-07-06 10:05:41.104 NOTIFICATION ODI-1128 Agent ODI_AGENT is starting. Application Server: STANDALONE. Agent Version: 11.1.1.5.0 - 22/04/2011. Port: 4999. JMX Port: 5999.
2011-07-06 10:05:55.170 NOTIFICATION ODI-1136 Starting Schedulers on Agent ODI_AGENT.
2011-07-06 10:06:55.677 WARNING 2006 Error occurred while computing schedules for work repository [WORKREP]. Error message : org.springframework.jdbc.CannotGetJdbcConnectionException: Could not get JDBC Connection; nested exception is oracle.odi.jdbc.datasource.ConnectionTimeoutException: A login timeout occured while connecting to the database
2011-07-06 10:06:55.729 ERROR ODI-1131 Agent ODI_AGENT encountered an error: ODI-1406: Agent ODI_AGENT started with warning: JDBC connection error occurs while connecting to the work repository WORKREP. Caused by: org.springframework.jdbc.CannotGetJdbcConnectionException: Could not get JDBC Connection; nested exception is oracle.odi.jdbc.datasource.ConnectionTimeoutException: A login timeout occured while connecting to the database
Need help in order to solve this case.Hi
Make sure that JDK 1.6.0_21 or higher version insatlled in your PC.
Have you installed RCU 11g before ODI 11g installation.
If not, please installed it and later start the ODI 11g installation.
Open odiparams.bat/sh file.
encode the master repository password using enocde.cmd/sh and paste the same encoded password on odiparams.bat/sh file
check MASTER DB Crredentials/Master repository login credentials/ work repository details are properly setuped or not.
check JDBC URL
check ODI_JAVA_HOME path seted in your PC
ODI_JAVA_HOME=d:\Oracle\Middleware\jdk160_21 in case weblogic installed before ODI 11g other wise
ODI_JAVA_HOME=c:\Program files\Java\jdk1.6.0_21\bin at Windows (setup it on environment variable) at linux export the ODI_JAVA_HOME path using "export" command
run the ODI agent and check whether it is running or not.
Hope this may helps you.
Thanks,
Phani -
ERPI 11.1.2.4 and odi agent java ee
HI, I have installed EPM system 11.1.2.4 now i want to set odi agent. In previous version i have to install odi and create agents but in this version i got a preinstalled ODI and precreated ODI agent. I have few queries related to odi agents:
1 - if i want to use standalone agent i have to install another ODI and there i can created standalone agent? correct?
2 - can i create standalone odi agent in already installed ODI by FDMEE?
3 - When i start my EPM services, does my odi agent starts automatically or i have to start odi agent manually?
RegardsHi JanGLi,
1) Yes, if you want standalone agent you need to install ODI studio in that you will get the option for standalone agent.
2) Yes, you can create standalone agent in already installed ODI by FDMEE and FDMEE has given you the J2EE agent in there configuration.
3) If the agent is J2EE then it has come by FDMEE so while starting the services for EPM for FDMEE the agent also starts(It depends how you have stated the properties of the services in the services.msc if it is automatically then while booting itself it will start else need to start manually.)
AND
If the agent is standalone you need to start manually bye going to that path(If you have configured the standalone agent).
Thanks,
Pratik -
Running Multiple ODI Agents On The Same Server
Is it possible to run multiple ODI Scheduler Agents simultaneously on the same Server?
As we provide Work repository name in ODI params file and if we have different work repository
and we want to run schedular agent on same server how can we point to the other work repository.
Do we need to create another installation of ODI agent files on same server?
Thanks
KashiHey Kashi,
You do not have to instal a separate Agent files again. All you need to do is to make sure that each set of agent has all the required parameter files which inclues, odiparams.bat , agentstart.bat and agentstop.bat(names may not be exactly same). Here is a website that gives you more details regarding creating multiple agents on same server
http://www.business-intelligence-quotient.com/?tag=odi-agents
regards,
k -
Error Adding ODI Agent to OPM-NModule libopmncustom: initialization failed
Hi All
I am getting an error when I try to add, remove or start and ODI Agent in OPMN. The Error is as follows:
E:\Oracle\products\11.1.1\Oracle_ODI_1\oracledi\agent\bin>odi_opmn_addagent.bat
agentcreate.properties
Module libopmncustom: initialization failed (proc set odiagent)
Module libopmncustom initialization failed: disabled
opmnctl reload: reconfiguring opmn...
opmn status shows that the agent has been added but it is down and when I try to start it I get the following error:
E:\Opmn1\Oracle_WT1\instances\instance2\bin>opmnctl startproc ias-component=ERPI
DEVAGENT
opmnctl startproc: starting opmn managed processes...
================================================================================
opmn id=servername:6701
no processes or applications matched this request
Response: not enabled: libopmncustom
I can start and successfully test the agent using the agent_DEVAGENT.bat file but the problem seems to be adding it to OPMN.
-This issues seems to be that the OPMN module libopmncustom failed to initialize properly and hence has been disabled. I cannot see how I can enable it and test again.
I have tried the following to resolve the issue
1. Removed the agent and restarted it
2. Restarted the OPMN service
3. Restarted the server
4. Reinstalled ODI as well as the Stand Alone Agent
5. Uninstalled OPMN and installed it to a different location
Has anyone come across this and could you please give me a few pointers of what I can look at. The configs that I have are as follows
ODI Version : 11.1.5.0_generic_110422.1001
OPMN Version : 11.1.1.3
OS : Server 2008 STD R2 x64
ODI and OPMN are running on the same machine.
Agentcreate.properties file:
# Use / as path seperator to specify path in Unix as well as Windows.
ORACLE_ODI_HOME=E:/Oracle/products/11.1.1/Oracle_ODI_1
INSTANCE_HOME=E:/opmn1/Oracle_WT1/instances/instance2
COMPONENT_TYPE=odiagent
COMPONENT_NAME=DEV_AGENT
ODI_MASTER_DRIVER=oracle.jdbc.OracleDriver
ODI_MASTER_URL=jdbc:oracle:thin:@prddb:1521:hypprd
ODI_MASTER_USER=ODI_MASTER
ODI_MASTER_ENCODED_PASS=dzfHrWobFQN4u7YLBqBq7cqtljDTCy
ODI_SECU_WORK_REPO=ODI_WORK
ODI_SUPERVISOR_ENCODED_PASS=cByXt0OZvhRCIyaOQoTnl7y
PORTNO=90210
JAVA_HOME=E:/Oracle/Middleware/jdk160_21
ORACLE_OPMN_HOME=E:/Opmn1/Oracle_WT1
JMXPORTNO=91210
ODI_OPMN_ADDAGENT
@echo off
REM #
REM # Copyright (c) 2009, 2010, Oracle and/or its affiliates. All rights reserved.
REM #
setlocal
for %%a in ("/HELP" "/help" "-HELP" "-help") do if %%a == "%1" goto HELPTEXT
goto STARTCOMMAND
:HELPTEXT
echo.
echo (c) Copyright Oracle. All rights reserved.
echo.
echo PRODUCT
echo Oracle Data Integrator
echo.
echo FILENAME
echo odi_opmn_addagent.bat
echo.
echo DESCRIPTION
echo Adds agent entry in opmn.xml file.
echo.
echo SYNTAX
echo odi_opmn_addagent ["<agent create property file name>"]
echo.
echo PREREQUISITES
echo The Agent Create PropertyFile INFORMATION should be
echo completed before running this script.
echo.
goto ENDCOMMAND
:STARTCOMMAND
if "%ODI_HOME%" == "" set ODI_HOME=E:\Oracle\products\11.1.1\Oracle_ODI_1\oracledi\agent
REM call "%ODI_HOME%\bin\odiparams.bat"
if "%OPMN_HOME%" == "" set OPMN_HOME=E:/Opmn1/Oracle_WT1
if "%INSTANCE_HOME%" == "" set INSTANCE_HOME=E:/opmn1/Oracle_WT1/instances/instance2
REM set CLASSPATH=%ODI_CLASSPATH%;%OPMN_HOME%\opmn\lib\opmneditor.jar
set CLASSPATH=%ODI_HOME%\lib\odi-standalone-agent.jar;%OPMN_HOME%\opmn\lib\opmneditor.jar;%ODI_HOME%\..\..\setup\manual\oracledi-sdk\oracle.odi-sdk-jse_11.1.1.jar
java -classpath %CLASSPATH% oracle.odi.AddAgentToOpmn %*
CALL %INSTANCE_HOME%\bin\opmnctl reload
:ENDCOMMAND
ODI PARAMS
REM #
REM # Repository Connection Information
REM #
set ODI_MASTER_DRIVER=oracle.jdbc.OracleDriver
set ODI_MASTER_URL=jdbc:oracle:thin:@prddb:1521:hypprd
set ODI_MASTER_USER=ODI_MASTER
set ODI_MASTER_ENCODED_PASS=dzfHrWobFQN4u7YLBqBq7cqtljDTCy
REM #
REM # User credentials for agent startup program
REM #
set ODI_SUPERVISOR=SUPERVISOR
set ODI_SUPERVISOR_ENCODED_PASS=cByXt0OZvhRCIyaOQoTnl7y
REM #
REM # User credentials for ODI tools
REM #
set ODI_USER=%ODI_SUPERVISOR%
set ODI_ENCODED_PASS=%ODI_SUPERVISOR_ENCODED_PASS%
REM #
REM # Work Repository Name
REM #
set ODI_SECU_WORK_REP=ODI_WORK
REM #
REM # Connection retry parameters
REM #
set ODI_CONNECTION_RETRY_COUNT=0
set ODI_CONNECTION_RETRY_DELAY=7000
REM #
REM # Java virtual machine
REM #
set ODI_JAVA_HOME=E:\Javax86\jdk1.6.0_29
REM #
REM # Other Parameters
REM #
set ODI_INIT_HEAP=256m
set ODI_MAX_HEAP=1024m
set ODI_JMX_PROTOCOL=rmi
REM #
REM # Additional Java Options
REM #
set ODI_ADDITIONAL_JAVA_OPTIONS=
REM # Windows 95,98, Me users only: Any package files added to the /drivers
REM # or /lib/scripting directory should be manually declared in the
REM # ODI_ADDITIONAL_CLASSPATH variable
set ODI_ADDITIONAL_CLASSPATH=
REM # DO NOT EDIT BELOW THIS LINE !
REM # ----------------------------------------------------------------------------
set ODI_JAVA_EXE=%ODI_JAVA_HOME%\bin\java.exe
set ODI_JAVAW_EXE=%ODI_JAVA_HOME%\bin\javaw.exe
set ODI_JAVAC_EXE=%ODI_JAVA_HOME%\bin\javac.exe
REM # Testing the java virtual machine
if not exist "%ODI_JAVA_EXE%" goto NOJAVA
if not exist "%ODI_JAVAW_EXE%" goto NOJAVA
if not exist "%ODI_JAVAC_EXE%" goto NOJAVAC
goto OKJAVA
:NOJAVA
@echo The Java Virtual Machine was not found at the following location: %ODI_JAVA_HOME%
@echo The ODI_JAVA_HOME environment variable is not defined correctly.
@echo Please set this variable in odiparams.bat.
goto OKJAVA
:NOJAVAC
@echo A JDK is required to execute Web Services with OracleDI. You are currently using a JRE.
goto OKJAVA
:OKJAVA
if "%ODI_HOME%" == "" set ODI_HOME=E:\Oracle\products\11.1.1\Oracle_ODI_1
REM # Change the current directory to %ODI_HOME%/bin
cd "%ODI_HOME%\bin"
Environmental Variables
JAVA_HOME=E:\Javax86\jdk1.6.0_29
ODI_JAVA_HOME=E:\Javax86\jdk1.6.0_29
Path=C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32
\WindowsPowerShell\v1.0\;E:\Oracle\Middleware\EPMSystem11R1\common\ODBC-64\Meran
t\6.0\Drivers;E:\Oracle\Middleware\EPMSystem11R1\products\Essbase\eas\console\bi
n;E:\Javax86\jdk1.6.0_29;E:\Javax64\jdk1.6.0_29;E:\Opmn1\Oracle_WT1\bin;E:\Opmn1
\Oracle_WT1\opmn\bin;E:\Opmn1\Oracle_WT1\opmn\lib;E:\Opmn1\Oracle_WT1\perl\bin
PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH;.MSC
Could someone please help me with this.
Thanks
Edited by: 800166 on 18/05/2012 00:39Solved the problem by dropping and recreating the user schema and all its objects, reinstalling and configuring both ODI and OPMN.
If you ever come across the problem I recommend the above, you will save yourself hours of troubleshooting -
ODI Agent 11g Exception in Linux
Hi,
I set up an agent agent_test in topology and used the correct parameters in odiParams.sh ( with encoded password)
When i try to run using ./agent.sh -NAME=agent_test Port=8080
I'm getting following strange exception
2011-08-03 11:34:52.797 NOTIFICATION ODI-1128 Agent agent64 is starting. Application Server: STANDALONE. Agent Version: 11.1.1.3.0 - 23/06/2010. Port: 8080. JMX Port: 9080
2011-08-03 11:35:04.982 WARNING unavailable
oracle.odi.agent.logging.logFramework.OdiAgentException.getLocalizedMessage(OdiAgentException.java:68)
oracle.odi.agent.logging.logFramework.OdiAgentException.toString(OdiAgentException.java:162)
java.lang.Throwable.<init>(Throwable.java:242)
java.lang.Exception.<init>(Exception.java:77)
java.lang.RuntimeException.<init>(RuntimeException.java:77)
oracle.odi.core.exception.OdiRuntimeException.<init>(OdiRuntimeException.java:56)
oracle.odi.agent.logging.logFramework.OdiAgentException.<init>(OdiAgentException.java:57)
oracle.odi.runtime.agent.processor.impl.CleanStaleSessionsUtils.cleanStaleSessionsAllWorkRepositories(CleanStaleSessionsUtils.java:218)
oracle.odi.runtime.agent.servlet.AgentServlet.cleanStaleSessions(AgentServlet.java:371)
oracle.odi.runtime.agent.servlet.AgentServlet.startup(AgentServlet.java:332)
oracle.odi.runtime.agent.servlet.AgentServlet.init(AgentServlet.java:226)
javax.servlet.GenericServlet.init(GenericServlet.java:241)
org.mortbay.jetty.servlet.ServletHolder.initServlet(ServletHolder.java:431)
org.mortbay.jetty.servlet.ServletHolder.doStart(ServletHolder.java:263)
org.mortbay.component.AbstractLifeCycle.start(AbstractLifeCycle.java:50)
org.mortbay.jetty.servlet.ServletHandler.initialize(ServletHandler.java:676)
org.mortbay.jetty.servlet.Context.startContext(Context.java:140)
org.mortbay.jetty.webapp.WebAppContext.startContext(WebAppContext.java:1239)
org.mortbay.jetty.handler.ContextHandler.doStart(ContextHandler.java:517)
org.mortbay.jetty.webapp.WebAppContext.doStart(WebAppContext.java:466)
org.mortbay.component.AbstractLifeCycle.start(AbstractLifeCycle.java:50)
org.mortbay.jetty.handler.HandlerWrapper.doStart(HandlerWrapper.java:130)
org.mortbay.jetty.Server.doStart(Server.java:224)
org.mortbay.component.AbstractLifeCycle.start(AbstractLifeCycle.java:50)
oracle.odi.Agent.startAgent(Agent.java:200)
oracle.odi.Agent.main(Agent.java:493)
I have ran and scheduled agents before but this strange exception to me. please help.
Thanks
JohnDid you try a different port number.
8080 is commonly used as an alternative to the HTTP port 80
Also, do you have a 64 bit linux ? If thats the case, then you have to install ODI using 32 bit version of Java on 64 bit linux -
RAC setup- Configure hostname in ODI agent
I have my Master & Work repositories hosted on a Oracle RAC environment. I have a standalone ODI agent which might installed in the same physical server or in a different server.
In a RAC setup, there are multiple hostnames for the same database. How do I make the ODI agent aware that it should look into a 2nd server (when the 1st host is down) when trying to connect to the repository ? I want to know where this should be configured in the agent setup.
Does this get automatically taken care of once I include both the hostnames in the JDBC URL of the repositories ?All depends on the JDBC you're using...
JDBC Thin work with the Oracle listener,
and JDBC OCI (which need an Oracle Client on the machine) works with a TNS description (here you can define several HOST).
I had have several issues with the Thin on our RAC so we've changed for an OCI one...
regards,
Brice -
Hello,
I am trying to create a new ODI agent and I can't find any simple set of steps to follow. Should I set up the physical and logical agents first? If I want it to be a scheduler agernt running as a windows service is there a different set of steps? I seem to have a collection of notes and documentation that give me bits and pieces of information but no concrete steps to follow. I know the odiparams.bat file needs to be updated as well. Any help would be greatly appreciated!
Thanks!Which version of ODI are you trying to set up and whis OS are you trying to install?
Edited by: rjdio on 21-Jul-2011 12:22
Maybe you are looking for
-
After upgrading to 7.6.1, drive letter changed - can't restore
After upgrading iTunes to version 7.6.1 on my Vista, none of the files could be played, giving me a "file not found". The music is still in the same old folder on my M-drive. Though, in the iTunes library file, the drive somehow was set to F, my DVD-
-
Ok, so I am new to GB. When I bring up the loop browser, the loops are shaded (not there) I click on them and it says I need to download them or something, so I did that (downloaded GB update). Still I have no loops in the browser. Do loops not come
-
Open/get an URL in/from Internet Explorer?
Just wondering if anyone had any ideas on how to pass a URL (eg."http://www.ibm.com") to Internet Explorer (or Netscape...) Or also the otherway round - is it possible to get hold of the current URL in Internet Explorer. Say i was surfing the net and
-
Help with Autodiscover.Proxy Unhealthy state.
Hello, I am trying to diagnose unhealthy systems in Exchange 2013. Here is my command and output. Lets start with the first one, Autodiscover.Proxy. [PS] C:\Windows\system32>Get-HealthReport -Server email| where {$_.alertvalue -ne "Healthy" } Serve
-
Exception creating Access application in SharePoint 2013
Good afternoon. I'm trying to create an Access 2013 application in Sharepoint 2013. The creation process completes successfully but when I open the application the following problems occur: Seeking Sharepoint logs I found the following exception whic