Installing OEM agent 10.2.0.4 - pre-req fails:  locale

Friends,
We are attempting to install an OEM agent 10.2.0.4 on AIX 5.1.
Just when we get to about 90% complete, we get an error regarding 'locale'.
WHen I checked the log file for the InstallActions, I find hundreds of errors related to:
INFO: ld: 0711-251 SEVERE ERROR: Symbol table entry 17 in object /oracle/product/agent10g/lib/libpls10.a[ociextp.o]:
Field n_offset contains -1726349312. Valid values are between 4 and 381.
ld: 0711-251 SEVERE ERROR: Symbol table entry 17 in object /oracle/product/agent10g/lib/libpls10.a[ociextp.o]:
Field n_offset contains -1726349312. Valid values are between 4 and 381.
Then, at the end of the log, I see:
INFO: End output from spawned process.
INFO: ----------------------------------
INFO: Exception thrown from action: make
Exception Name: MakefileException
Exception String: Error in invoking target 'itnsping nnfgt.o mkldflags client_sharedlib' of makefile '/oracle/product/agent10g/
network/lib/ins_net_client.mk'. See '/home/oracle/oraInventory/logs/installActions2009-04-14_01-41-51PM.log' for details.
Exception Severity: 1
Any ideas where I should start looking?
Thanks...

Thanks Srini,
You found our problem.
I checked our AIX filesystem, and it seems someone had configured the /oracle mount point which contains the Oracle executable binaries and library files to use the 'cio' (concurrent i/o) option.
Thank you for pointing this out. I'm actually new to AIX, although many years on other operating systems.
I'm also new to this company and just getting my feet wet here with AIX and their existing configurations.
I'm going to write a memo advising our sys admins not to use cio mount option on any mount points except for those containing only the oracle data files.
Thanks again.
Ji Li

Similar Messages

  • Error while installing OEM agent

    Hi All
    Below is my environment details.
    Oracle - 10.2.0.4.0
    Linux - RHEL5 - 2.6.18-128.1.6.el5
    Two node RAC environment
    I am following my company documents for installing OEM agent.
    I executed the below command
    agendDownload.linux_x64 -n <cluster_name> -c nodename1-vip,nodename2-vip
    I got below error
    Performing tests to see whether nodes nodename1-vip,nodename2-vip are available
    SEVERE:OUI-25023:The local node is not selected for installing this product. Include the local node in the cluster list or perform the installation on the nodes on which the install is to be performed.
    Can somebody help me why I got error. i pinged both the vips and am able to ping.
    i have another doubt. Do i need to mention vip name or just host name?
    Edited by: user1368801 on Aug 12, 2009 9:56 PM

    Thanks Surachart
    I checked the inventory.xml file
    Only hostnames (not VIP) are mentioned in the inventory.xml file. That means, do i need to mention only host names?
    Since I am following the company standard document, I need to be 100% sure before deviating from the document or else taking this vip issue to the document authors.

  • Not able to Install OEM Agent 10.2.0.4.0 on Linux Machine

    Hi,
    I am not able to install OEM Agent 10.2.0.4.0 on Linux Machine with user id ORACLE while installing i am getting "cannot execute binary file"
    through Windows i am taking the Server console with X-Manager.
    Regards
    Raveesh

    user8958742 wrote:
    Hi,
    I am not able to install OEM Agent 10.2.0.4.0 on Linux Machine with user id ORACLE while installing i am getting "cannot execute binary file"
    through Windows i am taking the Server console with X-Manager.Which Linux distro?

  • Unable to install OEM agent

    Hi all,
    I am not able to install the agent my server, I am follow below line to install but i m facing the below errror . In response file i updated the OMS hostname and port, path . I am using the port 4889
    ./runInstaller -silent -responseFile /<full path >.responsefile.rsp name
    it showing port 4889 is not reachable.
    Please help me in resolving this
    Regards
    Vasu

    Hi,
    This shows that your server is unable to communicate with the server where the OMS is installed.
    Check following:-
    1. Is OMS up and running?. Run emctl status oms on the OMS server and paste the results
    2. run telnet OMSHOSTNAME 4889 on the server where you are installing the agent and then post the results
    I can help you to fix this.
    Regards
    Jomon

  • How to install OEM agent into existing OEM DB Console

    Hey gurus
    A default OEM was created during 10G database creation.
    Plan to setup central monitoring by using OEM in separate host.
    Understand an agent need to be either push or install in the target that want to monitor. However, the existing dbconsole has been installed in each individual db during db creation.
    How can the central OEM able to monitor other database on on other servers ?
    Pls advise.

    thanks HG
    you mean to say i have to nstall grid control as well i mean . Beacuse right nw i can access and monitor my A database on server A . Now i want to Monitor B database on B server with out installing- configuring db console on B . so u mean to say i meed to install grid contol on A and grid agent on B so that i can managed both server centrally . Do u have any supporting link
    Regards

  • Cannot install OEM agent on AIX 5.3 version 10.2.0.5.0

    Hi all, I need hepl. I can,t install agent on AIX 5.3 version 10.2.0.5.0
    log show me:
    Command = oracle.sysman.emcp.agent.AgentPlugIn has failed
    Exception : java.lang.Exception:
    The Management Agent Configuration Assistant has failed. The following failures were recorded:
    after execute "agentca -f"
    I ve got messange
    You can see the log file: /opt/oracle/agent10g/cfgtoollogs/oui/configActions2011-09-22_01-22-35-PM.log
    bash-3.2$ cat /opt/oracle/agent10g/cfgtoollogs/oui/configActions2011-09-22_01-22-35-PM.log
    Unable to complete request: Fatal error while loading instance XML: oracle.sysman.emCfg.common.CfwException: Unable to unmarshal instance xml=/opt/oracle/agent10g/inventory/ContentsXML/ConfigXML/oracle.sysman.top.agent.10_2_0_5_0.CFM.3.inst.xml: javax.xml.bind.JAXBException: unexpected error in Unmarshalling.
    oracle.sysman.emCfg.common.CfwException: Fatal error while loading instance XML: oracle.sysman.emCfg.common.CfwException: Unable to unmarshal instance xml=/opt/oracle/agent10g/inventory/ContentsXML/ConfigXML/oracle.sysman.top.agent.10_2_0_5_0.CFM.3.inst.xml: javax.xml.bind.JAXBException: unexpected error in Unmarshalling.
    at oracle.sysman.emCfg.core.Cfm.loadAssociatedInstanceAndCreateHolder(Cfm.java:1073)
    at oracle.sysman.emCfg.core.Cfm.loadAssociatedInstancesAndCreateHolders(Cfm.java:1086)
    at oracle.sysman.emCfg.core.CfmFactory.connect(CfmFactory.java:75)
    at oracle.sysman.emCfg.client.CfwClient.<init>(CfwClient.java:141)
    at oracle.sysman.emCfg.client.CfwClient.connect(CfwClient.java:87)
    at oracle.sysman.emCfg.common.EmCfgActionPerform.initialize(EmCfgActionPerform.java:295)
    at oracle.sysman.emCfg.common.EmCfgActionPerform.perform(EmCfgActionPerform.java:307)
    at oracle.sysman.emCfg.common.EmCfgActionPerform.serviceRequest(EmCfgActionPerform.java:734)
    at oracle.sysman.emCfg.common.EmCfgActionPerform.start(EmCfgActionPerform.java:713)
    at oracle.sysman.oii.oiic.OiicRunConfig.main(OiicRunConfig.java:998)
    Caused by: oracle.sysman.emCfg.common.CfwException: Unable to unmarshal instance xml=/opt/oracle/agent10g/inventory/ContentsXML/ConfigXML/oracle.sysman.top.agent.10_2_0_5_0.CFM.3.inst.xml: javax.xml.bind.JAXBException: unexpected error in Unmarshalling.
    at oracle.sysman.emCfg.core.Cfm.loadInstance(Cfm.java:1139)
    at oracle.sysman.emCfg.core.Cfm.loadAssociatedInstanceAndCreateHolder(Cfm.java:1066)
    ... 9 more
    Caused by: javax.xml.bind.JAXBException: unexpected error in Unmarshalling.
    at oracle.xml.jaxb.JaxbUnmarshaller.unmarshal(JaxbUnmarshaller.java:225)
    at oracle.sysman.emCfg.core.Cfm.loadInstance(Cfm.java:1129)
    ... 10 more

    i have removed required files and rest this
    bash-3.2$ ls -la
    total 168
    drwxr----- 2 oracle oinstall 4096 Sep 23 10:51 .
    drwxr-x--- 3 oracle oinstall 256 Sep 23 10:42 ..
    -rw------- 1 oracle oinstall 4525 Sep 23 10:42 OuiConfigVariables.1_0_0_0_0.CFM.0.inst.xml
    -rw-r----- 1 oracle oinstall 5288 Sep 23 10:42 OuiConfigVariables.1_0_0_0_0.xml
    -rw-r----- 1 oracle oinstall 2342 Sep 23 10:42 oracle.iappserver.repository.api.10_1_2_0_2.xml
    -rw------- 1 oracle oinstall 4805 Sep 23 10:42 oracle.sysman.ccr.10_3_1_0_0.CFM.0.inst.xml
    -rw------- 1 oracle oinstall 4809 Sep 23 10:48 oracle.sysman.ccr.10_3_1_0_0.CFM.1.inst.xml
    -rw-r----- 1 oracle oinstall 5887 Sep 23 10:42 oracle.sysman.ccr.10_3_1_0_0.xml
    -rw------- 1 oracle oinstall 12763 Sep 23 10:42 oracle.sysman.top.agent.10_2_0_5_0.CFM.0.inst.xml
    -rw-r----- 1 oracle oinstall 16950 Apr 30 2009 oracle.sysman.top.agent.10_2_0_5_0.xml
    bash-3.2$ cd agent10g/bin/
    bash-3.2$ ./agentca -f
    Stopping the agent using /opt/oracle/agent10g/bin/emctl stop agent
    Oracle Enterprise Manager 10g Release 5 Grid Control 10.2.0.5.0.
    Copyright (c) 1996, 2009 Oracle Corporation. All rights reserved.
    Agent is Not Running
    Running agentca using /opt/oracle/agent10g/oui/bin/runConfig.sh ORACLE_HOME=/opt/oracle/agent10g ACTION=Configure MODE=Perform RESPONSE_FILE=/opt/oracle/agent10g/response_file RERUN=TRUE INV_PTR_LOC=/opt/oracle/agent10g/oraInst.loc COMPONENT_XML={oracle.sysman.top.agent.10_2_0_1_0.xml}
    Perform - mode is starting for action: Configure
    Perform - mode finished for action: Configure
    You can see the log file: /opt/oracle/agent10g/cfgtoollogs/oui/configActions2011-09-23_09-51-56-AM.log
    The plug-in Oneoff Patch Application has successfully been performed
    The plug-in Agent Configuration Assistant is running
    Performing free port detection on host=rmo-db-bsw.ru
    Securing the agent
    Performing targets discovery and agent configuration
    Starting the agent
    The plug-in Agent Configuration Assistant has failed its perform method
    The action configuration has failed its perform method
    the same record in log
    Command = oracle.sysman.emcp.agent.AgentPlugIn has failed
    Exception : java.lang.Exception:
    The Management Agent Configuration Assistant has failed. The following failures were recorded:

  • OEM Agent Installation

    I am trying to install oem agent in my HP-Itanium box it terminates with following message. can any one help?
    ./runInstaller -clone -forceClone -noconfig -silent -invPtrLoc /usr/local/oracle/oraInst.loc ORACLE_HOME=/usr/local/oracle/10.2.0/agent10g ORACLE_HOME_NAME=agentxyz ORACLE_HOSTNAME=xyz.abc.com
    Starting Oracle Universal Installer...
    No pre-requisite checks found in oraparam.ini, no system pre-requisite checks will be executed.
    Preparing to launch Oracle Universal Installer from /tmp/OraInstall2009-01-05_01-50-12PM. Please wait ...The Java RunTime Environment was not found at /tmp/OraInstall2009-01-05_01-50-12PM/jre/bin/java. Hence, the Oracle Universal Installer cannot be run.
    Please visit http://www.javasoft.com and install JRE version 1.3.1 or higher and try again.
    : No such file or directory
    Thanks.

    are u installing 10g agent ? what is the oms version?
    Look for the JRE location in the /tmp/ora and compare it with the actual location on the host. You migh have to update the JRE location on the oms_home/oui/oraparam.ini

  • OEM Agent 10g

    HI,
    Can any one help me to understand the use of OEM agent 10g? Is it different from OEM (dbconsole in single instance). Please provide some document link.
    Thanks,
    Gulshan

    Hi;
    That means while use Oracle Management console for monitoring all of our databases from centralized OEM console then on each database we have to install >OEM agent. I will check the links and will be back if have more query.Correct
    Now the usage of OEM agent is clear to me. Could you please let me know that how OEM agent communicate with OMS and is the repository stores locally of on the server where OMS installed.
    If possible, then please provide me the good link.Please see below link
    Master Note for 10g Grid Control Agent Process Control (Start, Stop & Status) & Configuration [ID 1082009.1]
    Regard
    Helios

  • Trying to install OEM 10g Grid Control agent on Windows Server 2008 x64

    Received the following when trying to install OEM 10.2.0.2 for Windows 32 bit. I believe Windows 64 bit version does not exist. I have installed this on 2003 x64 in the past.
    Error message:
    Checking operating system version: must be 4.0, 5.0, 5.1 or 5.2. Actual 6.0
    Failed <<<<
    Is there a workaround or a version that will install on 2008 x64?
    Thanks.

    This will give you the complete picture of Grid Certification.
    Oracle Enterprise Manager 10g Grid Control Certification Checker
    https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=412431.1
    Is there a workaround or a version that will install on 2008 x64?Well, no OMS has been certified with this version as of now. You can have 10.2.0.3/4 OMS on 2008(32 Bit)
    10.2.0.4 Agent is certified with 2008 64 bit.

  • Error installing 11gr1 oem agent on AIX 6.1

    Hi ,
    I am using the silent installation method for installating 11gr1 oem client using the doc"http://download.oracle.com/otndocs/products/oem/agent-files/64-bit/aix5l-64-11.1.0.1.0.-instructions.txt" ( 3.2. Silent installation of Management Agent). Below is the error i am getting , can some one help pass thru this error .
    oracle > ./runInstaller -silent -responseFile /backup/11.1.0.7/OEM_AGENT_11gR1/aix/response/additional_agent.rsp
    Starting Oracle Universal Installer...
    Checking Temp space: must be greater than 150 MB. Actual 3191 MB Passed
    Checking swap space: must be greater than 150 MB. Actual 4096 MB Passed
    Preparing to launch Oracle Universal Installer from /tmp/OraInstall2010-11-22_03-52-01PM. Please wait ...oracle > Exception in thread "main" java.lang.NoClassDefFoundError: oracle.sysman.oii.oiix.OiixNetOps
    at oracle.sysman.install.oneclick.EMGCInstallStaticVariables.<clinit>(EMGCInstallStaticVariables.java:119)
    at java.lang.J9VMInternals.initializeImpl(Native Method)
    at java.lang.J9VMInternals.initialize(J9VMInternals.java:200)
    at oracle.sysman.install.oneclick.EMGCInstaller.parseCommandLineArgs(EMGCInstaller.java:506)
    at oracle.sysman.install.oneclick.EMGCInstaller.init(EMGCInstaller.java:204)
    at oracle.sysman.install.oneclick.EMGCInstaller.main(EMGCInstaller.java:1042)
    Caused by: java.lang.ClassNotFoundException: oracle.sysman.oii.oiix.OiixNetOps
    at java.net.URLClassLoader.findClass(URLClassLoader.java:421)
    at java.lang.ClassLoader.loadClass(ClassLoader.java:643)
    at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:346)
    at java.lang.ClassLoader.loadClass(ClassLoader.java:609)
    ... 6 more
    I have changed the information that is required in file "additional_agent.rsp" .
    Thanks
    venkat

    What is the exact version of AIX you're running??
    The "problem" boxes we have are running 5.3 TL 04
    root@vsv1h202:/root
    # oslevel -s
    5300-04-CSPOther AIX5.3 boxes that are successfully installed with this agent are running TL 10
    root@vtl1h121ps:/root
    # oslevel -s
    5300-10-04-1015So it might be that there is also a source of the problem
    Edit: Also TL 06 fails:
    repprd@vsv1h184:/opt/repprd/ora/home/agent/aix/agent (REPPRD)
    $ oslevel -s
    5300-06-09-0844
    repprd@vsv1h184:/opt/repprd/ora/home/agent/aix/agent (REPPRD)
    $ ./runInstaller -silent -responseFile /opt/repprd/ora/home/agent/aix/agent/additional_agent.rsp -noconfig
    Starting Oracle Universal Installer...
    Checking Temp space: must be greater than 150 MB. Actual 921 MB Passed
    Checking swap space: must be greater than 150 MB. Actual 6144 MB Passed
    Preparing to launch Oracle Universal Installer from /tmp/OraInstall2010-12-01_02-21-01PM. Please wait ...
    $ Exception in thread "main" java.lang.NoClassDefFoundError: oracle.sysman.oii.oiix.OiixNetOps
    at oracle.sysman.install.oneclick.EMGCInstallStaticVariables.<clinit>(EMGCInstallStaticVariables.java:119)
    at java.lang.J9VMInternals.initializeImpl(Native Method)
    at java.lang.J9VMInternals.initialize(J9VMInternals.java:200)
    at oracle.sysman.install.oneclick.EMGCInstaller.parseCommandLineArgs(EMGCInstaller.java:506)
    at oracle.sysman.install.oneclick.EMGCInstaller.init(EMGCInstaller.java:204)
    at oracle.sysman.install.oneclick.EMGCInstaller.main(EMGCInstaller.java:1042)
    Caused by: java.lang.ClassNotFoundException: oracle.sysman.oii.oiix.OiixNetOps
    at java.net.URLClassLoader.findClass(URLClassLoader.java:421)
    at java.lang.ClassLoader.loadClass(ClassLoader.java:643)
    at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:346)
    at java.lang.ClassLoader.loadClass(ClassLoader.java:609)
    ... 6 moreFJFranken
    Edited by: fjfranken on 1-dec-2010 5:25

  • How to install and configure OEM agent in VCS cluster

    Hi there,
    I would like install 11g OEM agent for SUN SPARC OS for two node VCS cluster. OEM repository is residing in another server.
    Database (to be configured) is running on one node of VCS cluster, but it will be able to failover other server for any issues.
    I have downloaded the agent for sparc and planning to do the silent install.
    Could you please give me the steps to configure both nodes of the cluster including the parameters which need to be changed in the response file?
    Thanks in advance.
    Regards

    We are using OEM agents on VCS clusters. Some options are to 1) fail-over the agent with the database; 2) manually inform OEM that an instance has moved using emcli relocate_targets; 3) use VCS to relocate_targets through a fail-over script. Since our databases don't move much we have been using option 2 but are now testing option 3.
    Doug

  • Installing the OEM Agent on an AIX Clustered Environment

    I have installed the OEM 10.2.0.5 agent on a server (sgramchdd50) that is part of an AIX HACMP cluster configuration. The other node of this cluster is sgramchdd51 and the cluster name is sgramchdd52. After installing the agent the server name sgramchdd50 is hard-coded into the the $AGENT_HOME/sysman/config/emd.properties file as follows....
    EMD_URL=https://sgramchdd50:3872/emd/main/
    The problem is that when we failover to the other node (sgramchdd51) the agent no longer works because the inactive node is hard-coded in certain places. I need to hardcode the cluster name as it is always pointing at the active node in the cluster. I have tried the following (with no success)...
    -Stopped the agent
    -Modified the EMD_URL parameter of the emd.properties file as follows
    -EMD_URL=https://sgramchdd52:3872/emd/main/
    -Started the agent
    However, starting the agent fails.
    sagramihqchdd50<orabss:orurebss> $ ./emctl start agent
    Oracle Enterprise Manager 10g Release 5 Grid Control 10.2.0.5.0.
    Copyright (c) 1996, 2009 Oracle Corporation.  All rights reserved.
    Starting agent ........................................................................................................................... failed.
    Here are the last several lines of the emagent.trc file...
    *2010-07-14 16:02:38,799 Thread-1 WARN collector: MESSAGE_NLSID "Successful Name Registration Request Sent By Identity Provider(%)" is too long, truncating to "Successful Name Registration Request Sent By Identity Provider(%"*
    *2010-07-14 16:02:38,864 Thread-1 WARN collector: the column name DiskActivityavwait in this condition does not exist in metric DiskActivity*
    *2010-07-14 16:02:38,934 Thread-1 WARN collector: the column name DiskActivityavwait in this condition does not exist in metric DiskActivity*
    *2010-07-14 16:03:22,988 Thread-1071 ERROR fetchlets.oslinetok: Process exitcode = 0, stderr = Error connecting to https://sgramchdd52:3872/emd/main/*
    emctl status agent returned agent not running.
    *2010-07-14 16:03:22,988 Thread-1071 ERROR engine: [oracle_emd,sagramihqchdd52:3872,ProcessInfo] : nmeegd_GetMetricData failed : Error connecting to https://sgramchdd52:3872/emd/main/*
    emctl status agent returned agent not running.
    *2010-07-14 16:03:22,988 Thread-1071 WARN collector: <nmecmc.c> Error exit. Error message: Error connecting to https://sgramchdd52:3872/emd/main/*
    emctl status agent returned agent not running.
    Can anyone help with the necessary steps to take to accomplish what I'm trying to do.
    Any help would be very much appreciated.
    Thanks.
    Edited by: user11171364 on Jul 15, 2010 7:09 AM

    I think you should try to find the solution in your DNS.
    So lets say you name your node "MyActiveNode", your DNS only need to be modified to point to a different IP when failing over. The for the Agent it is still "logically" running on the same node.
    Same thing if you should use a Server Load Balancer, use the name of the SLB to configure the Agent.
    OK?
    Regards
    Rob
    http://oemgc.wordpress.com

  • Multiple OEM agents installed

    Good morning all,
    Our test database is a single node db in Sun Microsystems Inc. (SunOS 5.10). The database version is 10.2.0.4. We have an oem agent (10.2.0.4) installed in this db server communicate with a 10g grid control. Everything is working fine. Now we are trying to migrate this db server under 11g grid control. So what we did is installing new version of agent (10.2.0.5) into a different directory and configure this agent to talk to 11g grid control. So basically we have two agents installed in this db server. One is 10.2.0.4 agent which is talking to 10g grid control and another agent 10.2.0.5 which is talking with 11g grid control. Although both agents are running but we experience some issues: First, we noticed that all listeners in the server are in “Status Pending” in 11g grid control but actually all listeners are up. Second, a notification rule has been setup in 11g grid control to monitor one db instance and I purposely set the threshold very low so I can receive the alert email. But the all the alert emails actually comes from 10g grid instead of 11g where I set threshold very low. I am not sure how agent works internally so I am not sure if multiple agents will ever be work in one db server. Does anybody have any thoughts on this? Any insights to share?
    Greatly appreciate your help!
    Shirley

    Hi,
    You not there are most of the things about a target which are stored locally on the target rather than on the GC itself. For example, if you set t matrix value for a database target, it is stored on the database itself whether you use 10g or 11g GC . Here in your case, i think your both GC are fighting together to monitor a single target which is configured on both and i think it will not be supported (you can confirm from MOS). So my advise will be to configure your targets with only one GC (either 10g or 11g)
    Salman

  • Uninstalling and Installing the OEM Agent w/o OUI

    Hi DBAs,
    I have a 10.2.0.4 Oracle version on AIX with 2 node RAC Cluster. The old agent is 10.2.0.3 which I need to replace with new 10.2.0.4 agent. In order to install new agent, I need to remove the old version of Agent.
    Please guide how can I uninstall the old agent without using Oracle Universal Installer. And also how I can install the new Agent w/o OUI.
    Thanks
    -Samar-

    I was able to uninstall the Old Agent using the following command from all of the RAC instances. Can someone help me how can I install the Agent w/o using OUI.
    ./runInstaller -deinstall -silent "REMOVE_HOMES={/oracle/product/10.2.0/oem_1/agent10g}" -removeallfiles
    Thanks
    -Samar-

  • Not able to install OEM on my DB server

    Hi Friends,
    I am installing OEM for the 1st time in my org.
    I am getting the below error .Can someone help me here with some hints?
    Problems i am facing:
    1. Of the 4 options avaiable for installing in oracle GUI only the last one(Additional Management Agent..) is selectable.
    2. Even if select the last option the installation is failing with below commands.
    3. I am running the installation with -ignoreSysPrereqs because it is failing with below error otherwise:
    Checking operating system version: must be B.11.11 or B.11.23. Actual B.11.31
    ++++++++
    TLDETK> ./runInstaller -ignoreSysPrereqs
    Starting Oracle Universal Installer...
    Checking installer requirements...
    Checking operating system version: must be B.11.11 or B.11.23. Actual B.11.31
    Failed <<<<
    Ignoring required pre-requisite failures. Continuing...Preparing to launch Oracle Universal Installer from /tmp/OraInstall2011-04-01_01-02-33AM. Please wait ...-------------------------------------------------------
    Total args: 24
    Command line argument array elements ...
    Arg:0:/tmp/OraInstall2011-04-01_01-02-33AM/jre/1.4.2/bin/java:
    Arg:1:-Doracle.installer.library_loc=/tmp/OraInstall2011-04-01_01-02-33AM/oui/lib/hpunix:
    Arg:2:-Doracle.installer.oui_loc=/tmp/OraInstall2011-04-01_01-02-33AM/oui:
    Arg:3:-Doracle.installer.bootstrap=TRUE:
    Arg:4:-Doracle.installer.startup_location=/oracle_cdrom/Enterprise/Hp/10.2/10.2.0.1/OEM/hpunix/agent/install:
    Arg:5:-Doracle.installer.jre_loc=/tmp/OraInstall2011-04-01_01-02-33AM/jre/1.4.2:
    Arg:6:-Doracle.installer.nlsEnabled="TRUE":
    Arg:7:-Doracle.installer.prereqConfigLoc= :
    Arg:8:-Doracle.installer.unixVersion=B.11.31:
    Arg:9:-Djava.net.preferIPv4Stack=true:
    Arg:10:-mx150m:
    Arg:11:-cp:
    Arg:12:/tmp/OraInstall2011-04-01_01-02-33AM:/tmp/OraInstall2011-04-01_01-02-33AM/oui/jlib/OraInstaller.jar:/tmp/OraInstall2011-04-01_01-02-33AM/oui/jlib/oneclick.jar:/tmp/OraInstall2011-04-01_01-02-33AM/oui/jlib/xmlparserv2.jar:/tmp/OraInstall2011-04-01_01-02-33AM/oui/jlib/srvm.jar:/tmp/OraInstall2011-04-01_01-02-33AM/oui/jlib/share.jar:/tmp/OraInstall2011-04-01_01-02-33AM/oui/jlib/OraInstallerNet.jar:/tmp/OraInstall2011-04-01_01-02-33AM/oui/jlib/xml.jar:/tmp/OraInstall2011-04-01_01-02-33AM/oui/jlib/orai18n-collation.jar:/tmp/OraInstall2011-04-01_01-02-33AM/oui/jlib/orai18n-mapping.jar:/tmp/OraInstall2011-04-01_01-02-33AM/oui/jlib/emCfg.jar:/tmp/OraInstall2011-04-01_01-02-33AM/oui/jlib/ojmisc.jar:/tmp/OraInstall2011-04-01_01-02-33AM/oui/jlib/InstImages.jar:/tmp/OraInstall2011-04-01_01-02-33AM/oui/jlib/InstHelp.jar:/tmp/OraInstall2011-04-01_01-02-33AM/oui/jlib/InstHelp_de.jar:/tmp/OraInstall2011-04-01_01-02-33AM/oui/jlib/InstHelp_es.jar:/tmp/OraInstall2011-04-01_01-02-33AM/oui/jlib/InstHelp_fr.jar:/tmp/OraInstall2011-04-01_01-02-33AM/oui/jlib/InstHelp_it.jar:/tmp/OraInstall2011-04-01_01-02-33AM/oui/jlib/InstHelp_ja.jar:/tmp/OraInstall2011-04-01_01-02-33AM/oui/jlib/InstHelp_ko.jar:/tmp/OraInstall2011-04-01_01-02-33AM/oui/jlib/InstHelp_pt_BR.jar:/tmp/OraInstall2011-04-01_01-02-33AM/oui/jlib/InstHelp_zh_CN.jar:/tmp/OraInstall2011-04-01_01-02-33AM/oui/jlib/InstHelp_zh_TW.jar:/tmp/OraInstall2011-04-01_01-02-33AM/oui/jlib/oracle_ice.jar:/tmp/OraInstall2011-04-01_01-02-33AM/oui/jlib/help4.jar:/tmp/OraInstall2011-04-01_01-02-33AM/oui/jlib/help4-nls.jar:/tmp/OraInstall2011-04-01_01-02-33AM/oui/jlib/ewt3.jar:/tmp/OraInstall2011-04-01_01-02-33AM/oui/jlib/ewt3-swingaccess.jar:/tmp/OraInstall2011-04-01_01-02-33AM/oui/jlib/ewt3-nls.jar:/tmp/OraInstall2011-04-01_01-02-33AM/oui/jlib/swingaccess.jar:/tmp/OraInstall2011-04-01_01-02-33AM/oui/jlib/classes12.jar::/tmp/OraInstall2011-04-01_01-02-33AM/oui/jlib/OraPrereq.jar:/tmp/OraInstall2011-04-01_01-02-33AM/oui/jlib/jewt4.jar:/tmp/OraInstall2011-04-01_01-02-33AM/oui/jlib/jewt4-nls.jar:/tmp/OraInstall2011-04-01_01-02-33AM/ext/jlib/em_1click_help_de.jar:/tmp/OraInstall2011-04-01_01-02-33AM/ext/jlib/cfmlogger_properties.jar:/tmp/OraInstall2011-04-01_01-02-33AM/ext/jlib/em_1click_help.jar:/tmp/OraInstall2011-04-01_01-02-33AM/ext/jlib/em_1click_help_fr.jar:/tmp/OraInstall2011-04-01_01-02-33AM/ext/jlib/em_1click_help_es.jar:/tmp/OraInstall2011-04-01_01-02-33AM/ext/jlib/em_1click_help_ja.jar:/tmp/OraInstall2011-04-01_01-02-33AM/ext/jlib/em_1click_help_it.jar:/tmp/OraInstall2011-04-01_01-02-33AM/ext/jlib/em_1click_help_pt_BR.jar:/tmp/OraInstall2011-04-01_01-02-33AM/ext/jlib/em_1click_help_ko.jar:/tmp/OraInstall2011-04-01_01-02-33AM/ext/jlib/em_1click_help_zh_TW.jar:/tmp/OraInstall2011-04-01_01-02-33AM/ext/jlib/em_1click_help_zh_CN.jar:
    Arg:13:oracle.sysman.emgc.oneclick.OneStartup:
    Arg:14:-scratchPath:
    Arg:15:/tmp/OraInstall2011-04-01_01-02-33AM:
    Arg:16:-sourceLoc:
    Arg:17:/oracle_cdrom/Enterprise/Hp/10.2/10.2.0.1/OEM/hpunix/agent/install/../stage/products.xml:
    Arg:18:-sourceType:
    Arg:19:network:
    Arg:20:-timestamp:
    Arg:21:2011-04-01_01-02-33AM:
    Arg:22:-nowelcome:
    Arg:23:-ignoreSysPrereqs:
    Initializing Java Virtual Machine from /tmp/OraInstall2011-04-01_01-02-33AM/jre/1.4.2/bin/java. Please wait...
    TLDETK > java.lang.NullPointerException
    at oracle.sysman.emgc.oneclick.OneStartup.init(OneStartup.java:122)
    at oracle.sysman.emgc.oneclick.OneStartup.<init>(OneStartup.java:105)
    at oracle.sysman.emgc.oneclick.OneStartup.getInstance(OneStartup.java:96)
    at oracle.sysman.emgc.oneclick.OneArgs.main(OneArgs.java:650)
    at oracle.sysman.emgc.oneclick.OneStartup.main(OneStartup.java:367)
    Oracle Universal Installer, Version 10.2.0.1.0 Production
    Copyright (C) 1999, 2005, Oracle. All rights reserved.
    Unexpected Signal : 11 occurred at PC=0xDE6F65C0
    Function=_shlInit
    Library=/tmp/OraInstall2011-04-01_01-02-33AM/jre/1.4.2/lib/PA_RISC2.0/server/libjvm.sl
    Current Java thread:
    "main" prio=7 tid=0009ca98 nid=1 lwp_id=8478067 runnable [0x7b03e000..0x7b03e630]
    at oracle.sysman.oii.oiip.osd.unix.OiipuUnixOps.chgrp(Native Method)
    at oracle.sysman.oii.oiip.oiipg.OiipgBootstrap.changeGroup(OiipgBootstrap.java:1207)
    at oracle.sysman.oii.oiip.oiipg.OiipgBootstrap.writeInvLoc(OiipgBootstrap.java:901)
    at oracle.sysman.oii.oiip.oiipg.OiipgBootstrap.updateInventoryLoc(OiipgBootstrap.java:409)
    at oracle.sysman.oii.oiic.OiicSessionInterfaceManager.doInvSetupOperations(OiicSessionInterfaceManager.java:401)
    at oracle.sysman.oii.oiic.OiicInvSetupWCCE.doOperation(OiicInvSetupWCCE.java:217)
    at oracle.sysman.oii.oiif.oiifb.OiifbCondIterator.iterate(OiifbCondIterator.java:171)
    at oracle.sysman.oii.oiic.OiicPullSession.doOperation(OiicPullSession.java:1274)
    at oracle.sysman.oii.oiic.OiicSessionWrapper.doOperation(OiicSessionWrapper.java:289)
    at oracle.sysman.oii.oiic.OiicInstaller.run(OiicInstaller.java:547)
    at oracle.sysman.oii.oiic.OiicInstaller.runInstaller(OiicInstaller.java:935)
    at oracle.sysman.emgc.oneclick.OneClickWizard.runOuiInstaller(OneClickWizard.java:458)
    at oracle.sysman.emgc.oneclick.OneClickDirectory.runInstaller(OneClickDirectory.java:165)
    at oracle.sysman.emgc.oneclick.OneClickInstaller.runInstaller(OneClickInstaller.java:209)
    at oracle.sysman.emgc.oneclick.OneClickInstaller.doCompletion(OneClickInstaller.java:243)
    at oracle.sysman.emgc.oneclick.OneClickInstaller.process(OneClickInstaller.java:269)
    at oracle.sysman.emgc.oneclick.OneStartup.startup(OneStartup.java:359)
    at oracle.sysman.emgc.oneclick.OneArgs.main(OneArgs.java:650)
    at oracle.sysman.emgc.oneclick.OneStartup.main(OneStartup.java:367)
    Dynamic libraries:
    /tmp/OraInstall2011-04-01_01-02-33AM/jre/1.4.2/bin/PA_RISC2.0/java
    text:0x00001000-0x00010ecc data:0x00011000-0x00012ea8
    /tmp/OraInstall2011-04-01_01-02-33AM/jre/1.4.2/lib/PA_RISC2.0/server/libjvm.sl
    text:0xde014000-0xdea69b1c data:0x7ae3a000-0x7aff57f8
    /usr/lib/libpthread.1
    text:0xc2ae4000-0xc2b5b77c data:0x7ae04000-0x7ae06be8
    /usr/lib/libm.2
    text:0xc3ba8000-0xc3bcf364 data:0x7ae08000-0x7ae0cad0
    /usr/lib/librt.2
    text:0xc2adc000-0xc2ae00ac data:0x7b00a000-0x7b00a08c
    /usr/lib/libcl.2
    text:0xc2884000-0xc2a1623c data:0x7ae10000-0x7ae35408
    /usr/lib/libisamstub.1
    text:0xc0017000-0xc0017974 data:0x7b030000-0x7b0300a0
    /usr/lib/libCsup.2
    text:0xc2a18000-0xc2a33ed4 data:0x7ae36000-0x7ae38e24
    /usr/lib/libc.2
    text:0xc271c000-0xc28828cc data:0x7b00b000-0x7b01f858
    /usr/lib/libdld.2
    text:0xc0bfc000-0xc0bfe95c data:0x7b031000-0x7b0311e0
    /tmp/OraInstall2011-04-01_01-02-33AM/jre/1.4.2/lib/PA_RISC2.0/native_threads/libhpi.sl
    text:0xcb12c000-0xcb13e4a4 data:0x7ae0e000-0x7ae0f044
    /tmp/OraInstall2011-04-01_01-02-33AM/jre/1.4.2/lib/PA_RISC2.0/libverify.sl
    text:0xcb140000-0xcb14fcac data:0x7ae39000-0x7ae39f58
    /tmp/OraInstall2011-04-01_01-02-33AM/jre/1.4.2/lib/PA_RISC2.0/libjava.sl
    text:0xd4688000-0xd46b0afc data:0x7adf8000-0x7adf94e0
    /tmp/OraInstall2011-04-01_01-02-33AM/jre/1.4.2/lib/PA_RISC2.0/libzip.sl
    text:0xcb150000-0xcb162de4 data:0x7adf6000-0x7adf79d8
    /tmp/OraInstall2011-04-01_01-02-33AM/oui/lib/hpunix/liboraInstaller.sl
    text:0xcb164000-0xcb16b88c data:0x7ae07000-0x7ae072d0
    /tmp/OraInstall2011-04-01_01-02-33AM/jre/1.4.2/lib/PA_RISC2.0/libawt.sl
    text:0xd4748000-0xd47f1de4 data:0x6b5ca000-0x6b5f3de4
    /tmp/OraInstall2011-04-01_01-02-33AM/jre/1.4.2/lib/PA_RISC2.0/libmlib_image.sl
    text:0xd47f4000-0xd486db3c data:0x7adc4000-0x7adce3f0
    /tmp/OraInstall2011-04-01_01-02-33AM/jre/1.4.2/lib/PA_RISC2.0/libmawt.sl
    text:0xd4a00000-0xd4a70704 data:0x7ad3c000-0x7ad3f968
    /usr/lib/libXm.4
    text:0xdea6c000-0xdecb8b3c data:0x6b510000-0x6b53d3c4
    /usr/lib/libXp.2
    text:0xd48ac000-0xd48b4334 data:0x7adc1000-0x7adc15a4
    /usr/lib/libXt.3
    text:0xd4b84000-0xd4bea5ac data:0x6b5f8000-0x6b5fdcd4
    /usr/lib/libSM.2
    text:0xd48a0000-0xd48a96cc data:0x7ad34000-0x7ad35120
    /usr/lib/libICE.2
    text:0xd4888000-0xd489d9d4 data:0x78c6c000-0x78c6ee00
    /usr/lib/libXext.3
    text:0xd4870000-0xd48861ec data:0x7adcf000-0x7adcf8dc
    /usr/lib/libXtst.2
    text:0xcf214000-0xcf21912c data:0x7adf1000-0x7adf12b4
    /usr/lib/libX11.3
    text:0xd4a74000-0xd4b828c4 data:0x78c70000-0x78c7cc98
    /tmp/OraInstall2011-04-01_01-02-33AM/jre/1.4.2/lib/PA_RISC2.0/motif21/libmawt.sl
    text:0xd4bec000-0xd4c5c704 data:0x6b50c000-0x6b50f968
    /tmp/OraInstall2011-04-01_01-02-33AM/jre/1.4.2/lib/PA_RISC2.0/libfontmanager.sl
    text:0xd8f58000-0xd901fbe4 data:0x6b470000-0x6b47d9a0
    /tmp/OraInstall2011-04-01_01-02-33AM/jre/1.4.2/lib/PA_RISC2.0/libjpeg.sl
    text:0xd4c60000-0xd4c9d13c data:0x6b5fe000-0x6b5ff07c
    Heap at VM Abort:
    Heap
    def new generation total 5696K, used 2822K [75a00000, 76020000, 78c00000)
    eden space 5120K, 43% used [75a00000, 75c319b8, 75f00000)
    from space 576K, 100% used [75f90000, 76020000, 76020000)
    to space 576K, 0% used [75f00000, 75f00000, 75f90000)
    tenured generation total 12480K, used 2945K [6f600000, 70230000, 75a00000)
    the space 12480K, 23% used [6f600000, 6f8e0488, 6f8e0600, 70230000)
    compacting perm gen total 16384K, used 13709K [6b600000, 6c600000, 6f600000)
    the space 16384K, 83% used [6b600000, 6c363428, 6c363600, 6c600000)
    Local Time = Fri Apr 1 01:06:09 2011
    Elapsed Time = 208
    # HotSpot Virtual Machine Error : 11
    # Please report this error to HP customer support.
    # Java VM: Java HotSpot(TM) Server VM (1.4.2 1.4.2.06-041015-12:38-PA_RISC2.0 PA2.0 (aCC_AP) mixed mode)
    # An error report file has been saved as hs_err_pid9954.log.
    # Please refer to the file for further information.
    [HP ARIES32]: Error occured while writing core file for 32 bit
    [HP ARIES32]: PA-RISC application /tmp/OraInstall2011-04-01_01-02-33AM/jre/1.4.2/bin/PA_RISC2.0/java (got signal 6).
    [HP ARIES32]: Core file may not be correct
    Thanks,
    Kunwar

    OEM is installed by default when Oracle RDBMS s/w is installed on the system.
    Is this system currently an Oracle DB server system?
    do as below so we can know complete Oracle version & OS name.
    Post via COPY & PASTE complete results of
    SELECT * from v$version;

Maybe you are looking for