Installing OEM Grid Control on Solaris Sparc using an existing database

During installing OEM 10g on Solaris, after select "using an existing database" the connect string for database (host:port:sid) never is solicited and the path for datafiles neither, then the installation cancel.
On Windows, this type of installation in the same version work fine!
1_ How I do to install OEM 10g on Solaris using an existing db?
Tx,
Diego.

Have you installed the Management Agent for the target database?

Similar Messages

Installing OEM Grid Control not complete?

Hi,
I've installed OEM Grid Control on Solaris 5.10
Enterprise Manager 10g Grid Control Release 2 (v10.2.x)
Full Installers (Agent, Repository, OMS, and Management Packs)
from link
but no OMS ha been installed.
I had no choice during the installation process to mark it as well as other components like: Agent, Repository.
Is it not enough to use Disk1/.../runInstaller ???
Can anybody advice me how to install it completely (without patches, they blur the process to me, at present)
?

Yes, that should be enough. After that you have to choose one of the 2 choices and click next
1) Enterprise manager 10g grid control using new database
2) Enterprise manager 10g grid control using existing database.
Thanks,
Tarun

Error while installing OEM Grid Control

I am getting error while installing OEM Grid control (with existing database) at OMS Configuration. So, I cancelled the installation and deleted all databases and started the instal again. I am still getting an error at OMS configuration.
I am trying to read through the threads here to see if anyone has solved it. I see a lot of threads on this topic but not sure how you guys resolved it.
Can anyone help here.
In the oracle installer, I see the message : The c:\oraclehomes\agent10g\cfgtoollogs\configToolfailedCommands" script contains all commans that failed, were skipped or cancelled ....
--in this file, all I see is:
rem Copyright (C)1999, 2006 Oracle
oracle.sysman.emcp.agent.AgentPlugIn
How should I proceed
Thanks
Ramya
Edited by: Ramya Reddy on Mar 9, 2009 5:25 PM

go to AOh\bin and run agentca -f and check agent status

Installing OEM grid control on Linux 64 bit

Was someone able to install OEM grid control 10.2.0.1 on a RedHat linux 4.0 x86-64. I Know that it is not certified yet but most of the time it is possible to install a 32 bit application on a 64 bit OS.
Thanks

Yes, I have it installed. (let me tell you though, it wasn't easy!). A few notes:
1. Download and install compat-oracle-rhel4-1.0-5.i386.rpm from http://oss.oracle.com/projects/compat-oracle/files/RedHat/
(this essentially puts a wrapper around gcc and transforms it into a shell script)
2. Modify /usr/bin/gcc to look like this (add –m32):
exec /usr/bin/gcc32 -m32 -static-libgcc -B/usr/lib/gcc-lib/i386-redhat-linux/2.96/ "$@"
3. Execute “linux32 bash”
4. Run the installer.
Hope that helps.
P.S.: The installer might fail to detect the rpms below. Just make sure you have them installed.
compat-libstdc++-296-2.96-132.7.2
libstdc++devel-3.4.3-22.1
openmotif-21-2.1.30-11
Message was edited by:
D4Gov

How to install OEM Grid Control R2 on RHEL AS4 (AMD64/EM64T)

Hi all,
I was able to install the Oracle Application Server (Infrastructure and BI and Forms) successfully on the another machine with the same specs. The application I installed on the 64-bit machine is a 32-bit Oracle Application Server.
Now, I tried to install the OEM Grid Control R2 (another 32-bit Oracle Software) on an identical 64-bit machine but had no luck. Ran linux32 bash before trying the install.
I always get the error "error in invoking target 'dm_on ioracle' of makefile 'OH/db10g/rdbms/lib/ins_rdbms.mk".
Please help me/guide me in this install if it is at all possible.
Thanks and regards,
Mike

Did you read the installation docs?
Did you look up trying to do this on metalink before proceeding?

OMS Configuration Failed In the Process of Installing OEM Grid Control 10g

Hi every one,
i am getting the same problem in the installation Configuration Assistants, OMS Configuration Failed
I have already installed the Oracle software, created the databse and when i started installation, i selected the 2nd option to use the existing database.
here is i am getting the error:
details says that are as follows
oui-25031 oracle.sysman.emcp.agent.agentplugin,
so i followed the steps and drop the sysman user with cacade option
again i got the same error,
Environment:
Microsoft Windows XP Professional SP3,
Oracle 10G 10.2.0.1.0 (Already Installed)
Dell Inspiron 530
Intel(R)Core(TM)2 Quad CPU [email protected], 3.0GB RAM
have enough hard disk.
Now installing Oralce Enterprise Manager Grid Control 10g release2 (10.2)
i have seen the error messages in this forum many are on unix environment.
any views on windows operating system?
Thank You.

hi,
before you install grid, try and patch the database to a later release, 10.2.0.4
had this issue in work and patching the db resolved the issue.
I did install database software only, then patch then create database, then install grid
regards
Alan

Error when trying to install OEM Grid Control 10.2.0.2 win32

Hi
I'm trying to install Oracle Enterprise Manager Grid Control release 2 for windows server 2003 32 bits, but the installation could not be completed.
I got the following error when OMS Configuration step is running.
SEVERE: OUI-25031:Some of the configuration assistants failed. It is strongly recommended that you retry the configuration assistants at this time. Not successfully running any "Recommended" assistants means your system will not be correctly configured.
1. Check the Details panel on the Configuration Assistant Screen to see the errors resulting in the failures.
2. Fix the errors causing these failures.
3. Select the failed assistants and click the 'Retry' button to retry them.
The "C:\OracleHomes1\agent10g\cfgtoollogs\configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same
When I look into the configToolFailedCommands log file, the are any more information regard the issue.
Best Regards
ARmando

My server that was running that version had crashed, so I'm trying to install it again.
I have EBS 12.0 and 10g DB that I usually monitored with Grid Control.
What version do you recommend me?
Regards

What's the correct order to install OEM Grid Control + DB + AS?

Hi everbody! I'm getting start on OracleAS and Grid Control.
What's the correct order to install:
* Enterprise Manager 10g Grid Control
* Database 10gR2
* Application Server 10gR3
(on RHEL4-Upd2)
or the order is not important?
I need have the environment for each oracle software ($ORACLE_HOME, $ORACLE_BASE)? Or install first one, and change the environment and install, change again and install, etc.. ? :)
Tks!

Hey Rafael! You only have to use the Grid Control CDS, AS, repository database and grid control software are installed automatically, so you dont have to worry about the order u should have to follow.
Anyways if u have already installed a database u can use that one as a repository.
about the enviorment variables i guess u´ll be prompted for just one only directory cause u only need to install the software only one time.
hope u find this interesting!!
Regards, Luis

Install of OEM Grid Control on 10g RAC

Hi,
I try to install OEM Grid Control 10.1.0.3 on a 10G 10.1.0.2 database with ASM and RAC installed, on windows.
At the step of choosing the product to install, i would like to choose 'OEM GC using an existing database' or 'Additional management service 10.1.0.3', but it fails.
The reason is 'you cannot install OEM on a hardware cluster'.
I have no idea how to resolve that, do i have to change my RAC installation ?
thank you for your answer,
Isabelle

To install on RAC, you install using an existing database and then specify the sid/hostname for ONE instance in the RAC.
Once the management repository has been sucessfully installed and the mid-tier is up, you can edit emoms.properties to modify the JDBC url the application uses to connect to the database to be RAC aware.
The are a number of pre-installation requisites for an existing database to be used as a destination for a repository installation, there are both documents on metalink on the subject and the basic installation guide references pre-requisites for existing databases.

OEM Grid control 10.2.0.1 installation using existing database 10.2.0.3

Hi,
I am planning to install oem grid control 10.2.0.1 using existing database 10.2.0.3 for storing repository on HP_UX 64 bit PARISC.
Can it be possible, If not whats the reason and what issues it may arise.
If it possibel can anyone explain me the correct steps and is it compulsory to take full backup(we cant take ful backup bcoz space issues)

Yes, you must download and install the 10.2.0.1 version and then patch it up to the 10.2.0.4 version.
http://www.oracle.com/technology/obe/obe10gem/install/index.html
The above link shows you the install routine when using a new database, the steps for the existing database are only slightly different, all you need are the connection details for that existing database and you should be ok.
As for taking full backups of the Grid Control repository, I know many choose not to, space is always a big concern, but this depends on how critical your repository is to you. If you need it for the auditors, well then I'd suggest acquiring some more hard disks to up your space.

OEM Grid Control 10g Install

Hi,
I am new to OEM. I want to install OEM Grid Control in new linux maxhine. For this can i install any thing before go to OEM. Please help me out on this. Please expalin the install procedure.
Thanks in Advance,
Sridhar

Hey there :)
Can you elaborate on what you mean by "install an thing before", do you want to install other Oracle products, then OEM and point it to manage these installs?
As for the install procedure, a quick look at how its done is seen on the link below
http://www.oracle.com/technology/obe/obe10gem/install/gridinst/gridinst.htm
The Oracle By Example series can be quite a good base to start from when you are new to this area.
enjoy,
Grummy

OEM GRID CONTROL REMOTE INSTALLATION

Hello Good People,
I am trying to install OEM GRID CONTROL. I have a two RAC node (AIX 5L). I don't have acces to the server so my only option is remote installation.
I was able to ftp the file into a directory on the server but it will not unzip, (error: couldn't find 10g.zp or 10g.ZIP). I uploaded the file as binary.
Okay, I will like to install from my laptop, (xp) using the DVD that I have. I went through the documentation steps below:
1. Make sure that the remote access software is installed and running on the remote and local computers.
2. On the local computer, share the DVD drive.
3. On the remote computer, map a drive letter to the shared DVD drive. You would use the remote access software to do this on the remote computer.
Through the remote access software, run Oracle Universal Installer on the remote computer. You access Oracle Universal Installer from the shared DVD drive.
I am confuse with step 2 downward. How can I map a drive in UNIX or why should I? I am connected to the sever by Telnet.
Any direction or suggestion will be appreciated. Please note that all I want is to remotely install GRID CONTROL on my server from the DVD that I have.
Thanks for your help.......

Based on further researched I discovered that the problem is due to the fact that I don't have an X-Window client install on my local machine. I just install a free trial version (30days). OUI finally started and went through the various checks. Although, the check passed I couldn't continue. It is saying missing some files. I will post the erros messages from the log in a while.
Thanks

Installing Oracle10g Grid Control - - - management service hostname

Oracle 11g R1 RHEL 4 64bit
Grid Control 10.2.0.4
HI All,
I am installing the Oracle agent and when I get to the 'Specify Oracle Management Service Location' screen it asks for the 'Management Service Host Name'. Is this the same as my database server hostname? I'm not sure what to put here. When I do put the database server hostname in, then it says it can't locate port 4889 on that server. However, if you keep going through the install everything succeeds in the end. BUT, when I go to the link http://<management_service_hostname>:4889/em then nothing shows up. I am new with grid control. Anyone have any ideas?
Thanks.

Great. Thanks for your reply Bobcatalog!
Now I just want to get this all cleared up before I proceed with the installation. So here is what I am thinking of doing and please tell me if I am wrong, missing something or should do it another way.
1. Install OEM Grid Control 10.2.0.3 on a new host (server) which has nothing on it (i.e. no Oracle products - - - clean host) and then patch it to 10.2.0.4.
- I will use the create new database option, which will create the EM Repository database
- I will (or it will) install the OMS as well as the OMA (Oracle management Agent)
(Question: Should I install OEM Grid Control on just a regular filesystem or use ASM with it? I heard that there are issues with using ASM. If it will increase my chances of failure, then I will stay away from it...even though all our environments (DEV, PROD, QA) use ASM.
2. Install the OMA agent on each of the database servers (which are called 'targets') that I want to monitor.
And that is all that I will need to do, correct?
Thank you.

Error:Starting OEM Grid Control

Hi,
We have installed OEM Grid Control 11g on a Linux Suse 10 machine (which will act as a middleware/gateway machine to the database hosted on the remote machine.)
We have completed the Grid installation successfully after facing many issues related to repository.
Now we are trying to connect to the browser link, and are unable to connect it.
We have tried starting and stoping the OMS and agent severl times. but are getting the below errors:
oracle@lx368:~/Oracle/Middleware/oms11g/opmn/bin> ./opmnctl startall
opmnctl: ORACLE_INSTANCE is not set.
opmnctl startall requires that ORACLE_INSTANCE be correctly set in your
environment.
Make sure you are using ORACLE_INSTANCE/bin/opmnctl, or set ORACLE_INSTANCE
in your environment.
oracle@lx368:~/Oracle/Middleware/oms11g/opmn/bin>
oracle@lx368:~/Oracle/Middleware/oms11g/bin> ./emctl start oms
Oracle Enterprise Manager 11g Release 1 Grid Control
Copyright (c) 1996, 2010 Oracle Corporation. All rights reserved.
Starting WebTier...
WebTier Successfully Started
Starting Oracle Management Server...
Oracle Management Server Could Not Be Started
Oracle Management Server is Up
oracle@lx368:~/Oracle/Middleware/oms11g/bin>
The installation has completed successfully, How do we proceed to get the OEM Grid Control get started.
Thanks,
Sree

788029 wrote:
Hi,
We have installed OEM Grid Control 11g on a Linux Suse 10 machine (which will act as a middleware/gateway machine to the database hosted on the remote machine.)
We have completed the Grid installation successfully after facing many issues related to repository.
Now we are trying to connect to the browser link, and are unable to connect it.
We have tried starting and stoping the OMS and agent severl times. but are getting the below errors:
oracle@lx368:~/Oracle/Middleware/oms11g/opmn/bin> ./opmnctl startall
opmnctl: ORACLE_INSTANCE is not set.
opmnctl startall requires that ORACLE_INSTANCE be correctly set in your
environment.
Make sure you are using ORACLE_INSTANCE/bin/opmnctl, or set ORACLE_INSTANCE
in your environment.
oracle@lx368:~/Oracle/Middleware/oms11g/opmn/bin>
oracle@lx368:~/Oracle/Middleware/oms11g/bin> ./emctl start oms
Oracle Enterprise Manager 11g Release 1 Grid Control
Copyright (c) 1996, 2010 Oracle Corporation. All rights reserved.
Starting WebTier...
WebTier Successfully Started
Starting Oracle Management Server...
Oracle Management Server Could Not Be Started
Oracle Management Server is Up
oracle@lx368:~/Oracle/Middleware/oms11g/bin>
The installation has completed successfully, How do we proceed to get the OEM Grid Control get started.
Thanks,
SreeI thought the messages were pretty clear:
opmnctl: ORACLE_INSTANCE is not set.
opmnctl startall requires that ORACLE_INSTANCE be correctly set in your
environment.And my comments in your earlier thread still hold ....
Edited by: EdStevens on Nov 17, 2010 7:32 AM

OEM Grid control 10g on Linux

Hello,
I have installed OEM grid control 10g and able to connect to the console via the sysman user id.
I am trying to configure email notification, but though I put all credentials properly I am not able to receive any emails.
I was looking at Oracle documentation and it says....
The SMTP server is the name of the mail server (for examplemail.acme.com).
For Linux, the SMTP server must be the local host name.Use the fully qualified host name (including domain
Does the smtp server need to on the localhost ? can't it work with a smtp server on a different host than the grid control box ?
Any advice will be much appreciated.
S.

The smtp service doesn't need to be on the host you installed grid control, Grid control can use any smtp server as long as it can reach it.
Regards
Gokhan

Installing OEM Grid Control on Solaris Sparc using an existing database

Similar Messages

Maybe you are looking for