Installing of 2012 DS 1 hangs at Labwindows​/CVI Product 16 of 18

Keep getting the error wrong volume in the drive. Insert 2012DS1DVD1. WHen I insert DVD1 I am prompted to insert 2012DS1DVD3.
What's the fix?
Mech.Mon

Sorry, no error log to share; but I had the same problem:  Dev Suite installation ran fine up to same step (16 of 18), and then threw a 'Wrong Volume" error saying it wanted DVD#1 instead of #3.  When I put in DVD#1 and hit 'retry', it immediately threw the same error again, but this time asked for DVD#3.  After this second disc swap, the install proceeded, only to throw the same sequence of error messages when commencing to install the very next component.  In my case, it turned out the error messages were somehow being caused by my antivirus software, which I'd neglected to disable during the install.  The key hint was the title on the error popup:  'avgrsx.exe' is a component of my AVG antivirus software.  When I disabled the AVG antivirus, the remainder of the installation proceeded without interruption.  Oops...

Similar Messages

  • Sequence hangs after LabWindows/CVI DLL execution

    Hi there, I've written a DLL in LabWindows/CVI that I loaded and executed it successfully in TestStand, with the LabWindows/CVI adapter.
    The weird thing is that, when the adapter is configured to debug DLL code with an external instance of LabWindows/CVI, the sequence just hangs after the DLL finishs executing its code.
    If I turn off external LabWindows/CVI debugging, in the adapter configuration, it doesn't hang but other strange errors occur, even crashing TestStand!
    I reviewed my DLL source code and I didn't find anything problematic. Is it possible that the DLL is overwriting a reserved memory region, thus breaking TestStand functionality?  Have you ever seen that?
    Thank you very much.

    Yes it's possible that the call is corrupting memory. The most likely way for that to happen is if the prototype specified in TestStand does not match what actually exists in the dll, or if you write more bytes to an array passed in from teststand than the step is specified to be passing from TestStand. Double-check that your prototypes match and that you aren't writing past the end of any buffers or accessing any pointers incorrectly.
    Hope this helps,
    -Doug

  • Windows XP PCs installed SCEP 2012 R2 Client hanging

    All of a sudden since today morning we are keep getting calls for Windows XP PCs are hanging with issues related SCEP 2012 client. I am not sure if any recent definition update is causing ,this problem.
    Is it a known issue or is there any fix for it? I have tried many options, googling but none of any help.
    Thanks
    Regards,
    Mohammad Anwar
    InfoSeeker

    There is already a thread that deals with this issue:
    http://social.technet.microsoft.com/Forums/en-US/043515cb-2746-43dc-94e0-441f70fd50b8/system-center-endpoint-protection-error-0x80004005?forum=configmanagergeneral
    Locking this one.
    Torsten Meringer | http://www.mssccmfaq.de

  • Introducing LabWindows/CVI 2009

    National Instruments released LabWindows/CVI 2009 on Friday, December 4th.
    LabWindows/CVI 2009 includes enhanced productivity tools and introduces a new toolkit for run-time analysis and optimization. LabWindows/CVI 2009 also includes support for new technologies such as the Microsoft Windows 7 operating system, 64-bit application development and deployment, and provides a new interface for communicating with NI PXI FPGA-based hardware including FlexRIO and R Series data acquisition modules.
    Visit the What's New  page to see a full list of the new features in LabWindows/CVI 2009 that will help users create more reliable applications in a shorter amount of time and take advantage of new PC technologies. You can also view the What's New webcast series to get a closer look at the new features in LabWindows/CVI 2009. Some of the new features include:
    The new Execution Profiler Toolkit, an application performance measurement and analysis tool
    Improved debugging capabilities  capabilities with extended information in the variables and watch windows
    Easier user interface development with the attribute browser
    Integrated support for 64-bit application development and deployment
    The C- Interface to LabVIEW FPGA, a communication interface for FPGA-based hardware
    Support for Windows 7, the latest Microsoft operating system
    Additional Technical Resources Just for LabWindows/CVI Developers
    Subscribe to the LabWindows/CVI Quarterly quarterly newsletter  to receive the latest product news, tips and tricks, and developer resources. You can also join the LabWindows/CVI user community  and start collaborating with users.
    Adri Kruger
    LabWindows/CVI Product Manager
    Message Edited by Adri K. on 12-07-2009 03:28 PM
    Adri Kruger
    National Instruments
    LabVIEW Product Marketing

    Turbo,
    There isn't a document that covers all the features from 6.0 to 2009, though there are documents that talk about individual upgrades. 
    http://www.ni.com/lwcvi/whats_new.htm
    Also this document covers the upgrades since 8.0  http://zone.ni.com/devzone/cda/tut/p/id/7995
    There have been quite a few upgrades, you can always download an evaluation version and test it out for yourself http://www.ni.com/lwcvi/try.htm
    Richard S -- National Instruments --Applications Engineer -- Data Acquisition with TestStand

  • LabVIEW 2012 used to hang at shutdown, now hangs at launch ("Initializing menus")

    Hello,
    I'm running Windows 8 64-bit, and have LabVIEW 2012 32-bit (12.0f3). I started using it a few days ago, and was never able to shut down LabVIEW properly. I could close my projects, but when I then tried to exit LabVIEW from the home screen, the GUI simply stop responding, and I'd have to forcibly kill it. Then, I installed the latest VIPM, and noticed that I can't shut that down properly either (I believe VIPM is implemented in LabVIEW?). None of my non-LabVIEW-based programs have this issue.
    Then, I tried to install OpenG from within VIPM, which launched LabVIEW itself. However, that hung at "Initializing menus".
    I'm not sure if VIPM had anything to do with it, but now, I'm unable to start LabVIEW altogether. Even after restarting my machine (using the Restart option, not Windows 8's Hybrid Boot), LabVIEW would hang at "Initializing menus". Task Manager shows 0% CPU activity, and LabVIEW had only taken ~20MB of memory.
    What could be the cause, and how can I fix it?
    Thanks
    Solved!
    Go to Solution.

    Ok, I:
    Uninstalled ALL National Instruments, JKI, and IVI software.
    Rebooted
    Manually deleted residual NI, JKI, and IVI files/folders
    Cleaned the Windows registry of NI, JKI, and IVI entries
    Rebooted
    Checked Task Manager to ensure that no NI service eluded deletion
    Installed LabVIEW 2012 from the NI Developer Suite DVD (LabVIEW only -- no other components)
    Rebooted
    Launched LabVIEW
    LabVIEW launches now, but I'm still unable to shut it down properly... One day it will probably refuse to launch too.
    Some help please?

  • Unable to get SQL Server Agent to run after installing SQL 2012 Standard with SP1

    I am unable to get SQL Server Agent to run after installing SQL 2012 Standard with SP1. Log message is as follows:
    Attempting to load library 'xplog70.dll' into memory. This is an informational message only. No user action is required.
    Failed to verify Authenticode signature on DLL 'C:\Program Files\Microsoft SQL Server\MSSQL11.MSSQLSERVER\MSSQL\Binn\xplog70.dll'.
    Error: 17750, Severity: 16, State: 0.
    Could not load the DLL xplog70.dll, or one of the DLLs it references. Reason: (null).

    Hi JFriedley,
    According to your error message, there might three reasons for this issue.
    xplog70.dll is corrupt, you need to check if you have any SQL Server running on same file version and same production
     edition. If xplog70.dll is corrupt, you can copy it from the new server where agent is running fine to your problematic server.
    Native client not installed properly. If you try applying any latest Service Pack or Cumulative Update then check if the SQL Server Agent can start, if that also doesn’t solve issue then try to reinstalling SQL Server Native client from SQL Server setup
    files.
    There is a similar issue about error 17750, you can review the following article.
    http://blogs.lostincreativity.com/sqldba/sqlserver-error-17750-could-not-load-the-dll-xpstar90-dll/
    Regards,
    Sofiya Li
    If you have any feedback on our support, please click here.
    Sofiya Li
    TechNet Community Support

  • Installing SCOM 2012 SP1 Error

    Hi.
    When we try to install the SP1, the installation fails.
    We are using Server 2008 R2 Datacenter 64 bit.
    I have started the installation with elevated rights. The windows eventlog says:
    Product: System Center Operations Manager 2012 Agent -- The System Center 2012 - Operations Manager agent cannot be installed on a computer on which the Operations Manager management server, gateway server, Operations console, operational database, web console,
    System Center Essentials, or System Center Service Manager is already installed. These must be uninstalled in order to proceed.
    Event though the agent is not installed (not possible since its the Operations Management server)
    This are the programs that are installed on the server:
    I have zipped the log files and uploaded them
    to skydrive.

    Looking at the log files, the pre-reqs are fine. It detects that a previous version of the SCOM MS is installed and tries to upgrade:
    [15:06:16]: Debug: :isProductInstalled: product with {7348450D-5558-4CA6-8E71-044720D304F2} product code is installed on this machine
    [15:06:16]: Debug: :GetServerInstallState: OpsMgr Server is installed on this machine
    [15:06:16]: Debug: :isProductInstalled: product with {95241780-B772-4A42-A1F0-8FA951FAF619} product code is installed on this machine
    [15:06:16]: Debug: :GetUserInterfaceInstallState: OpsMgr UI is installed on this machine
    [15:06:16]: Debug: :isProductInstalled: product with {20F530CC-FD73-43FE-ABD3-138D140A77A9} product code is installed on this machine
    [15:06:16]: Debug: :GetWebConsoleInstallState: OpsMgr Web Console is installed on this machine
    What I see a bit further down is:
    [15:06:50]: Info: :Info:preparing for MS upgrade
    [15:06:50]: Always: :Operations Manager Agent is also installed on the machine. Since we are upgrading Server we will remove Agent from this machine and add back the Agent Management group after server upgrade.
    [15:06:50]: Always: :uninstalling product with product code: {5155DCF6-A1B5-4882-A670-60BF9FCFD688}
    [15:06:50]: Debug: :GetFullPathBasedOnSetupLocation: Attempted to resolve a file at C:\apps\sc2012sp1\Setup\AMD64\ but it wasn't found there.  Will return an empty string.
    I don't know if this is causing the issue but it fails just after this point. Perhaps try downloading a new .iso and re-mounting (rather than extracting).
    Cheers
    Graham 
    Regards Graham New System Center 2012 Blog! -
    http://www.systemcentersolutions.co.uk
    View OpsMgr tips and tricks at
    http://systemcentersolutions.wordpress.com/

  • SMS Provider Locations Do Not Match - Problem installing SCCM 2012 R2 CU4

    I have an SCCM 2012R2 CU1 site that has been upgraded from SCCM 2012 non-SP1, so I have gone from 2012 to 2012SP1 through CU5 and then to R2 and then to CU1.
    Over the course of the life of this site, which has more than 10k clients and 10 Site Systems, we have installed roles, removed roles, moved roles and removed Site Systems.
    I have also installed and removed SMS providers . . . which is where my issues begin.
    The site properties in the console list 6 SMS Providers and even lists an SMS provider on a server that was retired and is no longer a Site System.  When I query WMI using the following VBS script it only returns the *ACTUAL* SMS Provider locations,
    2 of the 6 listed in the GUI.
    On Error Resume Next
    Const ForReading = 1, ForWriting = 2, ForAppending = 8
    strComputer = "." 
    Set oFS = CreateObject("Scripting.FileSystemObject")
    Set objWMIService = GetObject("winmgmts:\\" & strComputer & "\root\sms")
    If Err.Number <> 0 Then
    WScript.Echo "Cannot connect to WMI"
    WScript.Echo vbTab & "Error " & Err.Number & " - " & Err.Description
    End If
    Set oLog = oFS.OpenTextFile("C:\Temp\SMS_ProvList.log",ForAppending, True)
    If Err.Number <> 0 Then
    WScript.Echo "Could not create output file"
    WScript.Echo vbTab & "Error " & Err.Number & " - " & Err.Description
    End If
    Set colItems = objWMIService.ExecQuery("SELECT * FROM SMS_ProviderLocation",,48)
    count = 0
    For Each objItem in colItems
        count = count + 1
        oLog.WriteLine "-----------------------------------"
        oLog.WriteLine Now()
        oLog.WriteLine "Provider instance " & count &  " : " & objItem.Machine
        oLog.WriteLine "NamespacePath : " & objItem.NamespacePath     
        oLog.WriteLine ""
    Next
    I have a test environment which has also gone through some growth over its lifetime and has had the same changes to SMS Providers made.  When I first attempted to install SCCM 2012 R2 CU4 in this test environment the installer continually failed the
    prerequisite checker when querying the CU level of the SMS Providers.  The only way that I could get past that issue was by running a site maintenance task via the CM installer and installing an SMS Provider at the location that had previously been an
    SMS Provider but I had uninstalled that role.
    I do not want to have to do that in my production environment, and would not even be able to do so if I wanted as I have retired one of the servers listed and cannot re-provision that machine.
    Any CM12 gurus out there with suggestions?  This strikes me as a standard MS problem when having multiple development teams working on a product/update and not having a standard location to check for configuration information (This is exactly the problem
    when configuring DNS suffixes via GPO and not manually setting the GUI to match).
    Thanks!
    Josh Gerner
    Cornell University.

    The issue I have is that I cannot find the WMI class that holds the SMS Providers that are returned by the GUI.
    I actually engaged MS Premier for a SCCM 2012 RAAS about 2 years ago and that was when the discrepancy first reared it's head.  The support person that I worked with couldn't give me a way of cleaning those entries at that point which is when I started
    logging the locations to be sure that my maintenance task was really installing or removing the SMS Providers.
    Josh Gerner

  • Not able to install server 2012 R2 on a VMware Workstation 10 .

    Dear Team,
    Thanks in advance. 
    I am facing an issue when installing server 2012 R2 on a VMware Workstation 10 .
    This is the error message i get ''windows cannot find the microsoft software license terms. make sure the installation sources are valid and restart the installation.'' 
    i have tried changing the initial install option of OS  to ''other''. But still its the same.
    Finally i have installed it without adding the OS disk in the initial setup. But the problem here is that its asking me activation key. 
    if you have the activation key for 180 days please let me know.

    I have the same problem here.
    With VMWare Workstation 10, downloading and using the Windows 2012 R2 ISO evaluation to test.
    Shortly after booting up with the ISO, it complains about this message:  ''windows cannot find the microsoft software
    license terms. make sure the installation sources are valid and restart the installation.''
    BUT, if you uninstall VMWare Workstation 10 and install VMWare Workstation 9, no problem.
    Something wrong with either VMWare Workstation 10 or Windows 2012 R2.

  • Unable to install SQL 2012 Enterprise on Windows 8.1 OS

    I had installed SQL 2012 Enterprise on my Windows 8.1 and was running successfully. I faced some SSRS & SSIS Authentication issue. So i decided to uninstall SQL and re-install it. On doing so, i am unable to install it.
    Wizard disappears from this screenshot onwards.
    Tried installing from Command Prompt.
    Setup.exe /q /ACTION=Repair /INSTANCENAME=instancename /IAcceptSqlserverLicenseTerms=true
    Still wizard disappears.

    Hello,
    I guess un-installation of SQL server is not complete and there are fragments remaining.Have you made sure you have uninstalled SQL server from add remove program completely.Make sure no features related to SQL server are present there.Please remove setup
    support files as well.Refer below link to remove it completely
    http://technet.microsoft.com/en-us/library/hh231731.aspx
    Similar issue docemented here
    If you face any issue below manual method for removing SQL server will be helpful
      1. Uninstall the existing SQL Server 2012 and all the components from the control panel.
        2. Backup the registry.
        3. Delete the following keys in regedit:
        --HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Microsoft SQL Server
        --HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\MSSQLServer
        4. Go to HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall and delete all the sub-keys referencing SQL Server.
        5. Go to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services and delete all the keys referencing SQL Server.
        6. Rename all the SQL Server folders in the computer.
        7. Reboot the machine.
    Revert if you face any issue.
    EDIT: IMP POINT installation of SQL server 2012 Enterprise edition On win 8.1 ( client OS machine) is not supported by MS.But it will not stop you from installation
    Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

  • Problems install SCCM 2012 with remote sql 2008 r2 sp2

    I am having issues installing sccm 2012 on a remote sql 2008 r2 sp2 server on a seperate instance.
    I get the error "The network path was not found"  
    if i point it at the primary instance it will let me continue but i cannot install sccm into that instance.
    I have turned off dynamic ports and set a static port but I do not see where i can enter that in the installer.
    I cannot seem to verify is the ssb port is working correctly or not.
    my account is local admin on both servers and a sql sysadm.
    There is no firewall between servers.
    Any suggestions?
    Regards
    Don

    SPN is setup to AUTO register and is working.  remote sql is not a cluster.  Windows firewall on both servers is disabled.  Sql browser is enabled and started.  we have a group for system center that contains site servers and this group
    is in the local admin of both servers and sysadm inside of sql server.
    Why  we are consolidating all or our lesser sql servers into a larger one.
    Snipt of the log.
    12/12/2012 2:57:37 PM: ConfigMgrSetupWizard Error: 1 : Exception message: [The network path was not found.
    ], Exception details: [System.IO.IOException: The network path was not found.
    Server stack trace: 
       at Microsoft.Win32.RegistryKey.Win32ErrorStatic(Int32 errorCode, String str)
       at Microsoft.Win32.RegistryKey.OpenRemoteBaseKey(RegistryHive hKey, String machineName)
       at Microsoft.SystemCenter.ConfigMgr.Setup.DatabaseUtility.GetSqlConnection(String databaseName, String serverName, Boolean encrypt)
       at Microsoft.SystemCenter.ConfigMgr.Setup.DatabaseUtility.CheckSqlConnection(String serverName, String instanceName)
       at System.Runtime.Remoting.Messaging.StackBuilderSink._PrivateProcessMessage(IntPtr md, Object[] args, Object server, Int32 methodPtr, Boolean fExecuteInContext, Object[]& outArgs)
       at System.Runtime.Remoting.Messaging.StackBuilderSink.AsyncProcessMessage(IMessage msg, IMessageSink replySink)
    Exception rethrown at [0]: 
       at System.Runtime.Remoting.Proxies.RealProxy.EndInvokeHelper(Message reqMsg, Boolean bProxyCase)
       at System.Runtime.Remoting.Proxies.RemotingProxy.Invoke(Object NotUsed, MessageData& msgData)
       at Microsoft.SystemCenter.ConfigMgr.Setup.CheckSqlAsync.EndInvoke(IAsyncResult result)
       at Microsoft.SystemCenter.ConfigMgr.Setup.DatabasePage.ValidatePage()
       at Microsoft.SystemCenter.ConfigMgr.SetupFramework.WizardForm.ActivatePage(String pageId, Boolean goingNext)
       at System.Windows.EventRoute.InvokeHandlersImpl(Object source, RoutedEventArgs args, Boolean reRaised)
       at System.Windows.UIElement.RaiseEventImpl(DependencyObject sender, RoutedEventArgs args)
       at System.Windows.Controls.Button.OnClick()
       at System.Windows.Controls.Primitives.ButtonBase.OnMouseLeftButtonUp(MouseButtonEventArgs e)
       at System.Windows.RoutedEventArgs.InvokeHandler(Delegate handler, Object target)
       at System.Windows.EventRoute.InvokeHandlersImpl(Object source, RoutedEventArgs args, Boolean reRaised)
       at System.Windows.UIElement.ReRaiseEventAs(DependencyObject sender, RoutedEventArgs args, RoutedEvent newEvent)
       at System.Windows.UIElement.OnMouseUpThunk(Object sender, MouseButtonEventArgs e)
       at System.Windows.RoutedEventArgs.InvokeHandler(Delegate handler, Object target)
       at System.Windows.EventRoute.InvokeHandlersImpl(Object source, RoutedEventArgs args, Boolean reRaised)
       at System.Windows.UIElement.RaiseEventImpl(DependencyObject sender, RoutedEventArgs args)
       at System.Windows.UIElement.RaiseEvent(RoutedEventArgs args, Boolean trusted)
       at System.Windows.Input.InputManager.ProcessStagingArea()
       at System.Windows.Input.InputManager.ProcessInput(InputEventArgs input)
       at System.Windows.Input.InputProviderSite.ReportInput(InputReport inputReport)
       at System.Windows.Interop.HwndMouseInputProvider.ReportInput(IntPtr hwnd, InputMode mode, Int32 timestamp, RawMouseActions actions, Int32 x, Int32 y, Int32 wheel)
       at System.Windows.Interop.HwndMouseInputProvider.FilterMessage(IntPtr hwnd, Int32 msg, IntPtr wParam, IntPtr lParam, Boolean& handled)
       at System.Windows.Interop.HwndSource.InputFilterMessage(IntPtr hwnd, Int32 msg, IntPtr wParam, IntPtr lParam, Boolean& handled)
       at MS.Win32.HwndWrapper.WndProc(IntPtr hwnd, Int32 msg, IntPtr wParam, IntPtr lParam, Boolean& handled)
       at MS.Win32.HwndSubclass.DispatcherCallbackOperation(Object o)
       at System.Windows.Threading.ExceptionWrapper.InternalRealCall(Delegate callback, Object args, Boolean isSingleParameter)
       at System.Windows.Threading.ExceptionWrapper.TryCatchWhen(Object source, Delegate callback, Object args, Boolean isSingleParameter, Delegate catchHandler)].
    12/12/2012 3:01:42 PM: ConfigMgrSetupWizard Information: 1 : Creating SQL connection to database ADMIN\master on server YSQL030.srf.local.
    12/12/2012 3:01:42 PM: ConfigMgrSetupWizard Error: 1 : Exception message: [The network path was not found.
    ], Exception details: [System.IO.IOException: The network path was not found.

  • Error in installing TestStand 2012

    Hi,
    I am seeing strange error while installing TS 2012. The attached files shows the error. My system has P4 processor with 2 GB memory and Win XP is the OS. Please help me in installing TS 2012.
    Thanks
    Attachments:
    1.JPG ‏13 KB
    2.JPG ‏22 KB
    setup.ini ‏33 KB

    Hi,
    Installer Error 1106 are caused by misconfigured system files within the OS if I am not wrong. You could try this:
    http://www.almuseo.com/1106-error.php
    Before that, also try the alternate setup.ini file provided. Replace your setup.ini with this and try the installation.
    Attachments:
    setup.ini ‏33 KB

  • Issue with SQL Agent when install SCOM 2012 R2

    Hi all,
    i'm try to install SCOM 2012 R2 with all components (Mgmt Server, Operation Console, Web Console, Reporting Server)
    Everything is fine, except Reporting Server. I have attached the picture below
    I have also check the SQL Server Agent in SQL Server Configuration Manager. It has already started. But... i dont know why?
    Is there anyone know what wrong it is??

    Many thanks Gautam,
    i have checked again in Repoting Services Configuration Manager & change the database to the local SCOM
    Cause i'm using database for management server, dataware house on SCCM. So reporting service automatic set the database on SCCM also.... :(
    So now i will show everyone who try to install SCOM
    For the Management & DatawareHouse database --> you could install on any SQL Server (open port 1433)
    For the Reporting Services:
    On the local SCOM, install SQL Server with these components (SQL Engine: SQL Agent; SQL Reporting)
    After install SQL successfully, login to the Reporting Services Configuration Manager to set:
    First, create the new database on local SCOM
    Second, Web Service URL. login to the IIS to create self-signed certification for own SCOM. then turn back too Web Service URL to create SSL Certification
    Set SQL Agent service to Automatic, then start
    so, that's all. I'm crazy with this issue for a whole day :)

  • Acrobat X Pro hangs when making PDF. Using on Windows 7 64. Just started hanging. Uninstalled and reinstalled. Installed update. Once it hangs, must go into crtl, alt, delete to force close.

    Acrobat X Pro hangs when making PDF. Using on Windows 7 64. Just started hanging. Uninstalled and reinstalled. Installed update. Once it hangs, must go into crtl, alt, delete to force close.

    As a debugging step, try printing to the Adobe PDF printer. If that fails, repeat with print-to-file selected. Assuming the print succeeds, open the file in Distiller to complete the creation of the PDF. If you get the PDF, then check to see if AcroTray is properly working as a background task.

  • After installing SCCM 2012 R2 CU4, I show a Distribution Point warning that won't clear.

    I recently installed SCCM 2012 R2 CU4 on a LAB environment, and nowhere is it more important to wait until all requisite site roles are reinstalled before doing anything else.
    I did, and still do, have an warning/ error on the Site components that shows up on one of the child primary sites after the CU4 installation.
    Distribution Manager has not tried to install IIS component of operating system to distribution point “[“Display=\\SCxxx\”]MSWNET:[“SMS_SITE=xxx”]\\xxx\”. You should install and configure IIS manually. Please ensure RDC is also enabled.
    IIS is installed, RDC is enabled, but I get this error. What could be the real issue?

    Hi,
    So you have tried to reinstall IIS conponents and DP?
    Have you checked the distmgr.log? Anything helpful?
    Best Regards,
    Joyce
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Maybe you are looking for