Installing of my HP Deskjet f370 on my Mac OS X version 10.6.8

Hi,
I cannot see my printer and i cannot install my printer.
Kindly advice what would be the problem.
And there is a chance to connect on it.
Thank you,
Ralph Anthony

Hello ralphanthony,
Welcome to the HP Forums.
I see that you are having some issues with installing the printer on to your Mac.
Please click the following link and download the HP DeskJet, PSC and OfficeJet Full Feature Software and Drivers - Mac OS X v10.6.
If the troubleshooting does not help resolve your issue, I would then suggest calling HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions, click here: click here.
Thanks for your time.
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

Similar Messages

  • Want to install Output Module in Adobe Bridge CC on Mac OS X, Version 10.9.2, but in my Library hierarchy there is no folder "Adobe Bridge CC Extensions".  Where install downloaded files?

    Hello,
    Unfortunately, the output module is not pre-installed in Adobe Bridge CC anymore. So I downloaded the files provided. These are supposed to be saved in the following folder: "Bridge CC Extensions". This is supposed to be under Library > Application Support > Adobe > Bridge CC. However, there is no such folder. Do I have to create it?
    Thank you for a hint on what to do.
    Best,
    Heike

    Thank you for a hint on what to do.
    Check this thread and read the instructions of the download carefully. You have two libraries, one at system level and one at user level.
    https://forums.adobe.com/thread/1299228

  • HP deskjet F370 driver for windows 8

    I don't seem to be able to find a driver for Windows 8.1 that will allow me to use my HP Deskjet F370. Can anybody give me advice?
    This question was solved.
    View Solution.

    Hello hnnh,
    There are two ways to download and install the ful featured software  for Deskjet F370..
    1> Please download and run the HP Printer Install Wizard from www.hp.com/go/tools  
    2> Or click HERE to go to driver page, select your PC OS , click next and then click on Driver and download full featured software.
    Regards,
    Jabzi
    Give Kudos to say "thanks" by clicking on the "thumps Up icon" .
    Click "Accept as Solution" if it solved your problem, so others can find it.
    Although I am an HP employee, I am speaking for myself and not for HP.

  • Problem in Printing with HP Deskjet F370 All-in-One Printer

    Product Name and Number: HP Deskjet F370 All-in-One Printer
    Cartridge Number: Black - HP 21 Black Inkjet Print Cartridge   (C9351AA)
                                       Colour - HP 22 Tri-color Inkjet Print Cartridge   (C9352AA)
    Operating System Installed: Windows 7 Home Premium (64 Bit)
    Hi,
    I am using HP Deskjet F370 All-in-One Printer. Recently I am facing a critcal problem.
    I am unable to print anything in red or brown colour.
    The cartridges are in good condition with more than 80% ink level in color cartridge and 65% above in black cartridge.
    I have done alignment of printer cartridges and also reset the printer.
    However after that, I have taken a test print which works fine. I can print in black or any other colour expect red and brown.
    Whenever I am trying to print anything in brown it is coming out in green colour.
    I don't know what to do....Please help.
    Thanks
    Suvadeep Paul
    Thanks
    Suvadeep Paul

    Hi there,
    This article should cover the missing colors you are experiencing. Give the steps located here a shot and let us know if it helps.
    Best of Luck!
    You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

  • Deskjet F370 All-in-one with MacBook Air OS X 10.10

    Hi Helpers.
    My new MacBook Air with OS X 10.10 Yosemite causes all of the lights on my printer to flash and allows no printing. What should I do, other than add to the Scrap Mountain and buy a new printer? My printer is  Deskjet F370 All-in-one. 
    Thanks in anticipation.
    De13

    Hi @De13
    I am not entirely sure what is causing the lights on your Deskjet F370 to blink, but I do have a a few troubleshooting steps we can try.
    Let's reset the printing system, repair disk permissions, re-add the printer using the right driver, and try to scan again.
    Reset Printing System
    Click the Apple icon (   ), and then click System Preferences.
    In the Hardware section, click Print & Fax/Scan. The Print & Fax/Scan  dialog box opens.
    Right-click (or  Ctrl  +click) in the left panel, and then click Reset printing system…
    Click OK to confirm the reset.
    Type the correct Name and Password.
    Click OK to reset the printing system. The Print & Fax dialog box shows no printer selected
    Note: This will remove all printers in the print and Fax/Scan, any printer removed can be re-added later by clicking the plus (+) symbol.
    Repair Disk Permissions
    On the Dock, click Applications, and then click Utilities.
    Double-click Disk Utility.
    Highlight your hard drive/partition on the left (by default this is "Macintosh HD").
    Click the Repair Disk Permissions button at the bottom of the window.
    Once the repair is complete, restart the computer and add the printer back.
     Download and install the HP Printer Drivers for OS X.
    When you add the printer, please ensure you are using the HP driver.
    Select Add other Printer or Scanner                                                      
    Select the printer you are adding and next to 'Use' you can select the printer driver 
    I look forward to hearing from you.
    Please click the Thumbs up icon below to thank me for responding.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Sunshyn2005 - I work on behalf of HP

  • HP Deskjet F370 driver corrupted

    Spoiler (Highlight to read)
    To whom it may concern,
    I installed a driver for my HP Deskjet F370 printer from the official download page (I selected Windows 7 64 bit Ultimate which I am using), but the file is corrupted. The download was successful, the installation process started, I selected which products I want to include in my installation then agreed the Licence Agreement, but then the installation stopped because a file was missing. I also tried the installation with the HP Support Assistant, but it turned out that the same corrupted file was downloaded and I got the same error message.
    I kindly ask you to direct me to a link where I can download a working version of the driver.
    Yours sincerely,
    Máté Vitkovits

    Hello there! Welcome to the forums @Mate91 
    I saw your post about how you're looking for the correct driver for your Deskjet F370, on Windows 7 64bit.
    Click this link to get to the correct driver download: HP Deskjet and Officejet Full Feature Software and Drivers
    If you see an error message during the installation, please let me know what it's saying exactly, and I will do my best to help with the problem!
    Have a wonderful day
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • How to install without the disk deskjet 2512

    Hello I have recently moved and took printer but not computer.  How can I install the printer without the disk.

    Hi bill440cars,
    Welcome to the HP Support Forum.  I understand that you would like to install your Deskjet 2512 and need the drivers.
    I have included the link to the driver download page for your printer.  You will need to choose your operating system from the drop down and follow the instructions. 
    If your new PC is running Windows 7 or Windows 8, you can download HP's Printer Install Wizard. It will find the best driver for your printer and operating system and guide you through installing it.
    HP Deskjet 2512 All-in-One Printer Drivers
    http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?product=5231933&lc=en&cc=us&dlc=en&lang=en&cc=us
    How Do I Find the Best Driver for My HP Printer in Windows 7 or Windows 8?
    http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c02681060
     

  • HT201456 I have tried to install Windows 8.1 64 on my new Mac Book Pro from a full install disc.

    I have tried to install Windows 8.1 64 on my new Mac Book Pro from a full install disc. When I get the the choice of partitions to install Windows 8.1 on the Windows installer says that the Bootcamp partition is not valid.
    Has anyone encountered the same issue?

    BCA creates the partition as FAT, which the installer needs to format.
    Please see https://help.apple.com/bootcamp/mac/5.0/help/#/bcmp173b3bf2 for reference. Where does it break in your case?

  • How/Can I install WINDOWS 7 64BIT on a 1st Generation Mac Pro ?

    Hi, Is it possible to install Windows 7 64 bit on a 1st Generation Mac Pro 2.66Ghz? Apple suggests that it's not possible and yet I've seen several Googled posts where the users have successfully installed 64 bit on a 1st Generation Mac Pro. The problem is that they've done this creating a bootable iso disk(whatever that is) using a Windows computer with imgburn and windows commands. I'm pretty good at following instructions but I haven't seen any instructions on how to install Windows 7 on this machine using a Mac based approach.
    I'm using BootCamp and was able to partition the drive into NFTS and "proceed" with installation; however all te installations failed during setup and Windows would not boot; disk repair was not possible. Besides, from what I've gathered, 32 bit is problematic around memory issues.
    When I try installing 64 bits, I never get past the "select cd rom 1or 2" message where the keyboard won't work. It is at this point where others say they have successfully proceeded with moving forward by creating a bootable iso disk.
    Problem is it's all Windows based with exe files and presupposes I already have Windows running.
    I'm not sure I really understand how to create an iso disk, but I do have ROXIO TOAST 10 which is capable of burning "ISO" disks.Does anyone know how to do this and/or can you point me to a place where there are instructions on how to proceed?? While I realize Apple says that some mid 2006 mac pros aren't supported, there are multiple posts of windows users successfully installing Windows 7 on a 1st Generation Mac Pro.
    Thanks.

    I have a March 2009 Mac Pro dual quad core running Win7 Pro 64 bit. I have Windows installed on a dedicated internal hard drive. There are no partitions, the entire drive is for Windows use.
    Here's how I installed it, I did not start with BootCamp. Make sure the drive you're going to use for Windows doesn't have any important files on it because it will be formatted.
    1. Update Snow Leopard
    2. Place the Windows cd in the Super Drive
    3. Shut down the computer
    4. Remove all the hard drives except the one you want Windows installed on. Keep track of the order they are in and at the end replace them in the same order.
    5. Boot the computer holding down the Option key
    6. Boot to the Windows cd
    7. Install Windows and format the drive to NTFS
    8. When Windows needs to restart during installation you'll need to hold the Option key and boot to Windows, not the Windows cd.
    9. After Windows installs, place your Snow Leopard disc in the Super Drive
    10. The Drivers for Windows will be installed along with a Windows version of BootCamp.
    11. Go to Start > All Programs > Apple Software Update
    12. Update again until it's done.
    13. You'll also find a BootCamp under Control Panel, check it out.
    14. Shut down the computer and replace the hard drives in their original order
    14. Now if you turn on the computer it will boot to Snow Leopard, but if you hold the Option key during boot you can select Windows or Mac.

  • How do I download Adobe Flash Player on my MacBook Pro?  It says that I have to disable my antivirus software but I never installed one. Does it come with the Mac in the first place?

    How do I download Adobe Flash Player on my MacBook Pro?  It says that I have to disable my antivirus software but I never installed one. Does it come with the Mac in the first place? If so, how can I disable it or get Adobe Flash Player?

    That message is just a standard one issued, mainly for Windows users, you can disregard it if you didn't install any anti-virus. (OS X has one installed by Apple that doesn't interfere)
    It's just some forms of anti-malware are really paranoid and lock the entire machine down. (like Norton)
    If you need assistance installing Flash
    How to install/uninstall Flash, fix problems
    How to uninstall/install software on your Mac

  • Can someone please help me re-install my Creative Design 5.5 on my Mac?  My MacBook Pro recently crashed and had to have the hard drive replaced.  The back up from Time Machine is not reinstalling the program.  Since I have the download paid, and codes, I

    Can someone please help me re-install my Creative Design 5.5 on my Mac?  My MacBook Pro recently crashed and had to have the hard drive replaced.  The back up from Time Machine is not reinstalling the program.  Since I have the download paid, and codes, I need direction on how to reinstall -- HELP?

    Hi bodegakc,
    If you have the serial number then please use the below mentioned link to download the product you are looking for .
    CS5.5
    Also before installing Please go to Applications-->Utilities--> Adobe installers and if there is any uninstaller for CS5.5 , you can remove it and do a fresh install.
    You can also use creative cloud cleaner tool before installing.
    Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
    Thanks
    Nikhil Gupta

  • HT1199 My mac has OSX version 10.8.2 and I'm try to install an aiport express base station which requires 10.5.7 or later. Yet when I try to install the software it says the base station is not compatible with my mac version - how do I resolve?

    My mac has OSX version 10.8.2 and I'm try to install an aiport express base station which requires 10.5.7 or later. Yet when I try to install the software it says the base station is not compatible with my mac version - how do I resolve?

    You already have the software installed that you need if you have 10.8.2.
    If AirPort Utility cannot find the Express, that is another matter. More software is not needed. More troublehooting is needed.
    Power up the Express for a full minute
    Hold in the reset button on the Express for 7-8 seconds and release
    Allow a full minute for the Express to restart
    Click the AirPort icon at the top of the Mac's screen
    Look for a heading of New AirPort Base Station
    Just below that, click on AirPort Express
    What happens?

  • Can't install montain lion, mavericks or yosemite on my mac pro early 2008 8core

    I tried installing mountain lion mavericks and yosemite on my mac pro early 2008 I upgraded the video card to see if that was the problems and still the same the problem is that after installing even during install the mouse moves super slow and the keyboard won't work at all so I can't entern
    any information this is with a clean install and even if I update  lion it does the same everything works fine on  lion 10.7.5 problems there does any one know what could be the issue here? I'm only running one monitor and its the 30 inch cinema display here are the specst of my machine excuse my grammar and spelling it was never my favorite subject
      Model Name: Mac Pro
      Model Identifier: MacPro3,1
      Processor Name: Quad-Core Intel Xeon
      Processor Speed: 2.8 GHz
      Number of Processors: 2
      Total Number of Cores: 8
      L2 Cache (per Processor): 12 MB
      Memory: 8 GB
      Bus Speed: 1.6 GHz
      Boot ROM Version: MP31.006C.B05
      SMC Version (system): 1.25f4
      Serial Number (system): G881111VXYK
      Hardware UUID: 714C0BE4-9A35-5C33-BF74-0F55F7C31B5F
    AMD Radeon HD 6870:
      Chipset Model: AMD Radeon HD 6870
      Type: GPU
      Bus: PCIe
      Slot: Slot-1
      PCIe Lane Width: x16
      VRAM (Total): 1024 MB
      Vendor: ATI (0x1002)
      Device ID: 0x6738
      Revision ID: 0x0000
      ROM Revision: 007-NETKAS-ORG
      EFI Driver Version: 01.00.507
      Displays:
    Cinema HD:
      Display Type: LCD
      Resolution: 2560 x 1600
      Pixel Depth: 32-Bit Color (ARGB8888)
      Display Serial Number: CY03018WXMP
      Main Display: Yes
      Mirror: Off
      Online: Yes
      Rotation: Supported
      ECC: Enabled
    DIMM Riser B/DIMM 1:
      Size: 2 GB
      Type: DDR2 FB-DIMM
      Speed: 667 MHz
      Status: OK
      Manufacturer: 0x014F
      Part Number: 0x5453324741504D41435038502D5420202020
      Serial Number: 0x00031CFB
    DIMM Riser B/DIMM 2:
      Size: 2 GB
      Type: DDR2 FB-DIMM
      Speed: 667 MHz
      Status: OK
      Manufacturer: 0x014F
      Part Number: 0x5453324741504D41435038502D5420202020
      Serial Number: 0x00031CFB
    DIMM Riser A/DIMM 1:
      Size: 1 GB
      Type: DDR2 FB-DIMM
      Speed: 667 MHz
      Status: OK
      Manufacturer: 0x80AD
      Part Number: 0x48594D5035313241373243503844332D5335
      Serial Number: 0x01431026
    DIMM Riser A/DIMM 2:
      Size: 1 GB
      Type: DDR2 FB-DIMM
      Speed: 667 MHz
      Status: OK
      Manufacturer: 0x80AD
      Part Number: 0x48594D5035313241373243503844332D5935
      Serial Number: 0x57656411
    DIMM Riser B/DIMM 3:
      Size: Empty
      Type: Empty
      Speed: Empty
      Status: Empty
      Manufacturer: Empty
      Part Number: Empty
      Serial Number: Empty
    DIMM Riser B/DIMM 4:
      Size: Empty
      Type: Empty
      Speed: Empty
      Status: Empty
      Manufacturer: Empty
      Part Number: Empty
      Serial Number: Empty
    DIMM Riser A/DIMM 3:
      Size: 1 GB
      Type: DDR2 FB-DIMM
      Speed: 667 MHz
      Status: OK
      Manufacturer: 0x80AD
      Part Number: 0x48594D5035313241373243503844332D5335
      Serial Number: 0x01172313
    DIMM Riser A/DIMM 4:
      Size: 1 GB
      Type: DDR2 FB-DIMM
      Speed: 667 MHz
      Status: OK
      Manufacturer: 0x80AD
      Part Number: 0x48594D5035313241373243503844332D5335
      Serial Number: 0x01172714
    Intel ESB2 AHCI:
      Vendor: Intel
      Product: ESB2 AHCI
      Link Speed: 3 Gigabit
      Negotiated Link Speed: 3 Gigabit
      Description: AHCI Version 1.10 Supported
    WDC WD5000AAKS-00A7B0:
      Capacity: 500.11 GB (500,107,862,016 bytes)
      Model: WDC WD5000AAKS-00A7B0                 
      Revision: 01.03B01
      Serial Number:     WD-WMASY0158891
      Native Command Queuing: Yes
      Queue Depth: 32
      Removable Media: No
      Detachable Drive: No
      BSD Name: disk2
      Medium Type: Rotational
      Bay Name: Bay 1
      Partition Map Type: GPT (GUID Partition Table)
      S.M.A.R.T. status: Verified
      Volumes:
    disk2s1:
      Capacity: 209.7 MB (209,715,200 bytes)
      BSD Name: disk2s1
      Content: EFI
    HD:
      Capacity: 499.25 GB (499,248,103,424 bytes)
      Available: 484.82 GB (484,820,348,928 bytes)
      Writable: Yes
      File System: Journaled HFS+
      BSD Name: disk2s2
      Mount Point: /Volumes/HD
      Content: Apple_HFS
    Recovery HD:
      Capacity: 650 MB (650,002,432 bytes)
      BSD Name: disk2s3
      Content: Apple_Boot
    WDC WD5000AAKS-00A7B0:
      Capacity: 500.11 GB (500,107,862,016 bytes)
      Model: WDC WD5000AAKS-00A7B0                 
      Revision: 01.03B01
      Serial Number:     WD-WMASY0158891
      Native Command Queuing: Yes
      Queue Depth: 32
      Removable Media: No
      Detachable Drive: No
      BSD Name: disk2
      Medium Type: Rotational
      Bay Name: Bay 1
      Partition Map Type: GPT (GUID Partition Table)
      S.M.A.R.T. status: Verified
      Volumes:
    disk2s1:
      Capacity: 209.7 MB (209,715,200 bytes)
      BSD Name: disk2s1
      Content: EFI
    HD:
      Capacity: 499.25 GB (499,248,103,424 bytes)
      Available: 484.82 GB (484,820,348,928 bytes)
      Writable: Yes
      File System: Journaled HFS+
      BSD Name: disk2s2
      Mount Point: /Volumes/HD
      Content: Apple_HFS
    Recovery HD:
      Capacity: 650 MB (650,002,432 bytes)
      BSD Name: disk2s3
      Content: Apple_Boot
    Intel ESB2 AHCI:
      Vendor: Intel
      Product: ESB2 AHCI
      Link Speed: 3 Gigabit
      Negotiated Link Speed: 3 Gigabit
      Description: AHCI Version 1.10 Supported
    HDS725050KLA360:
      Capacity: 500.11 GB (500,107,862,016 bytes)
      Model: HDS725050KLA360                       
      Revision: K2AOAB5A
      Serial Number:       KRVN67ZBHBEEAH
      Native Command Queuing: Yes
      Queue Depth: 32
      Removable Media: No
      Detachable Drive: No
      BSD Name: disk1
      Medium Type: Rotational
      Bay Name: Bay 2
      Partition Map Type: MBR (Master Boot Record)
      S.M.A.R.T. status: Verified
      Volumes:
    UNTITLED 1:
      Capacity: 500.11 GB (500,107,860,992 bytes)
      Available: 449.41 GB (449,412,988,928 bytes)
      Writable: Yes
      File System: MS-DOS FAT32
      BSD Name: disk1s1
      Mount Point: /Volumes/UNTITLED 1
      Content: DOS_FAT_32
    HDS725050KLA360:
      Capacity: 500.11 GB (500,107,862,016 bytes)
      Model: HDS725050KLA360                       
      Revision: K2AOAB5A
      Serial Number:       KRVN67ZBHBEEAH
      Native Command Queuing: Yes
      Queue Depth: 32
      Removable Media: No
      Detachable Drive: No
      BSD Name: disk1
      Medium Type: Rotational
      Bay Name: Bay 2
      Partition Map Type: MBR (Master Boot Record)
      S.M.A.R.T. status: Verified
      Volumes:
    UNTITLED 1:
      Capacity: 500.11 GB (500,107,860,992 bytes)
      Available: 449.41 GB (449,412,988,928 bytes)
      Writable: Yes
      File System: MS-DOS FAT32
      BSD Name: disk1s1
      Mount Point: /Volumes/UNTITLED 1
      Content: DOS_FAT_32
    Intel ESB2 AHCI:
      Vendor: Intel
      Product: ESB2 AHCI
      Link Speed: 3 Gigabit
      Negotiated Link Speed: 3 Gigabit
      Description: AHCI Version 1.10 Supported
    HDS725050KLA360:
      Capacity: 500.11 GB (500,107,862,016 bytes)
      Model: HDS725050KLA360                       
      Revision: K2AOAB5A
      Serial Number:       KRVN67ZAK1RKSF
      Native Command Queuing: Yes
      Queue Depth: 32
      Removable Media: No
      Detachable Drive: No
      BSD Name: disk0
      Medium Type: Rotational
      Bay Name: Bay 3
      Partition Map Type: GPT (GUID Partition Table)
      S.M.A.R.T. status: Verified
      Volumes:
    disk0s1:
      Capacity: 209.7 MB (209,715,200 bytes)
      BSD Name: disk0s1
      Content: EFI
    machd:
      Capacity: 499.25 GB (499,248,103,424 bytes)
      Available: 372.42 GB (372,419,407,872 bytes)
      Writable: Yes
      File System: Journaled HFS+
      BSD Name: disk0s2
      Mount Point: /
      Content: Apple_HFS
    Recovery HD:
      Capacity: 650 MB (650,002,432 bytes)
      BSD Name: disk0s3
      Content: Apple_Boot
    HDS725050KLA360:
      Capacity: 500.11 GB (500,107,862,016 bytes)
      Model: HDS725050KLA360                       
      Revision: K2AOAB5A
      Serial Number:       KRVN67ZAK1RKSF
      Native Command Queuing: Yes
      Queue Depth: 32
      Removable Media: No
      Detachable Drive: No
      BSD Name: disk0
      Medium Type: Rotational
      Bay Name: Bay 3
      Partition Map Type: GPT (GUID Partition Table)
      S.M.A.R.T. status: Verified
      Volumes:
    disk0s1:
      Capacity: 209.7 MB (209,715,200 bytes)
      BSD Name: disk0s1
      Content: EFI
    machd:
      Capacity: 499.25 GB (499,248,103,424 bytes)
      Available: 372.42 GB (372,419,407,872 bytes)
      Writable: Yes
      File System: Journaled HFS+
      BSD Name: disk0s2
      Mount Point: /
      Content: Apple_HFS
    Recovery HD:
      Capacity: 650 MB (650,002,432 bytes)
      BSD Name: disk0s3
      Content: Apple_Boot
    Intel ESB2 AHCI:
      Vendor: Intel
      Product: ESB2 AHCI
      Link Speed: 3 Gigabit
      Description: AHCI Version 1.10 Supported
    Intel ESB2 AHCI:
      Vendor: Intel
      Product: ESB2 AHCI
      Link Speed: 3 Gigabit
      Description: AHCI Version 1.10 Supported
    Intel ESB2 AHCI:
      Vendor: Intel
      Product: ESB2 AHCI
      Link Speed: 3 Gigabit
      Description: AHCI Version 1.10 Supported

    Try this:
    clone your system and repair it with Disk Warrior instead
    Or try a clean test system install on another drive
    A must: SmcFanControl 2.2 - a mere 400 rpm extra to keep air cooling up
    Try to run w/o externals. MyBook included.
    Is that a 7200.11 1TB? they had a lot of issues.
    Run AHT off your OEM DVD.
    2008 had to have EFI and SMC updates to deal with freezes on wake from sleep, and like all models, high inrush current.  Hopefully you have a UPS and is 1500VA unit.
    When you do hard restart from power button, you almost certainly add more directory errors and to files requiring immediate attention to repair and rebuild the directory; and to scan and repair and delete cache and temp files and folders. A must. Invest in bootable backups SuperDuper along with Disk Warrior (or TechTool Pro 6, maybe Drive Genius 3 but I'd rate that #3).
    TimeMachine has its own bad habits, especially with Green drives and some externals.
    Try to rule out everything and then add back one at a time.
    And it may just be time to replace the 8800, very common, a couple threads this week, and it is 3 yrs old.  Might want ATI 5870 or 5770.

  • I accepted/installed an update for iMovie and it turns out that this version is not compatible with my graphics card. So now I can no longer open or use iMovie.  Any ideas on how to get around this - how to revert to the previous version.

    I accepted/installed an update for iMovie and it turns out that this version is not compatible with my graphics card. So now I can no longer open or use iMovie.  Any ideas on how to get around this - how to revert to the previous version??

    Look in your Applications folder.  If your system behaved as expected, you should have an iMovie 9.0 folder in your Applications folder.  Apple moved the old version there as even they suspected the new versions was a train wreck.

  • How do I take ownership of a hard drive build in windows but installed as an additional disk in my new Mac Pro?

    How do I take ownership of a hard drive build in windows but installed as an additional disk in my new Mac Pro?
    I bought a Mac and have various HDDs, some Portable some SATA, I can right to them and dont seem to be able to take ownership of them, is this to do with the format or Security seting I can't find?
    Any help would be great; thanks.
    Stephen

    Thanks Kaz-K, this was what I assumed it to be.  I have started to move the stuf over to a 4GB internal drive, once done and verified, I will reformat the drive and move it back, blooming nusience.
    Cheers.
    Stephen

Maybe you are looking for