Installing Officejet Pro 8610 on Windows Server 2008 R2

I am trying to install an HP officejet Pro 8610 in a Windows Server 2008 R2 machine.
As an FYI the server aleady has an Officejet Pro 8600 installed on it
I ran the setup.exe from the install CD, as an administrator
The first window appears and I clikc continue
The next window appears and I select connect a new printer
At the Connection options window, I selected Wired network and it displays the correct printer
I slect the printer and click next and the installation starts and runs for about a minute that displays the following message
The printer works fine from another PC which is running windows 7 (64-bit) So I know the problem is not in the printer or the network.
Any suggestions would be appreciated
Thanks in advance

Server 2008 (x86) is supported, and I had an x64 machine set up last month that had FP12 installed and running in IE and Firefox. 64 bit IE wouldn't run it for some reason, but the 32 bit did. It installed in C/Windows/System32/Macromed/Flash and C/Windows/SysWOW64/Macromed/Flash, but I was unable to get the ActiveX plug-in to enable outside of 32 bit IE.
I also set up a Server 2012 machine that DID support the x64 ActiveX, but that's probably not an option for you.
Like you, I'd be leery of "hacks" to get it to run as an x64 pkug-in, as it may have unintended and undesired consequences in other areas.

Similar Messages

Install Premiere pro cs4 on windows server 2008

Hi ,
How can i Install Premiere pro cs4 on windows server 2008?

I don't think you can... as far as I know, PPro is not designed to run on a server

Office Jet pro 8610 for windows server 2008 R2

I have the new Office Jet pro 8610 prither but dosn't have the driver for "Windows Server 2008 R2 Enterprise" 64 Bit.
What to do now. Can you please provide ?
Thanks in advance.
This question was solved.
View Solution.

Hi,
The same driver as provided for any Windows OS as Windows 7 or 8 should be used, the installation however should be launch via the command line and not as a standard installation.
Follow these steps to install the printer software on a server:
http://support.hp.com/us-en/product/HP-Officejet-Pro-8610-e-All-in-One-Printer/5367603/model/5367606...
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Is it Possible to install ODDC 32 bit on Windows Server 2008 R2(64bit)?

Hi All,
Is it Support to Install ODDC 32 bit on Windows Server 2008 R2(64 bit).
I am Posting this bcoz I did not found any ODDC related Blogs.
Please help on this
Thanks,
Raj

The certification matrix ( http://www.oracle.com/technetwork/middleware/webcenter/content/odc-cert-matrix-214688.pdf ) does not mention OS for ODDC Server, but as ODC is certified for Win Server 2008, R2, 32 or 64 bit, I believe the answer is yes.
Make sure, however, that you ODDC clients run on a different OS (see Exceptions).

Best practice for install oracle 11g r2 on Windows Server 2008 r2

Dear all,
May I know what is the best practice for install oracle 11g r2 on windows server 2008 r2. Should I create a special account for windows for the oracle database installation? What permission should I grant to the folders where Oracle installed and the database related files located (datafiles, controlfiles, etc.)
Just grant Full for Administrators and System and remove permissions for all others accounts?
Also how should I configure windows firewall to allow client connect to the database.
Thanks for your help.

Hi Christian,
Check this on MOS
*RAC Assurance Support Team: RAC Starter Kit and Best Practices (Windows) [ID 811271.1]*
https://support.oracle.com/CSP/main/article?cmd=show&type=NOT&doctype=BULLETIN&id=811271.1
DOC Modified: 14-DEC-2010
Regards,
Levi Pereira

Installing SUP 2.0 in Windows Server 2008

Hello Experts,
   I am going to install SUP 2.0 in windows server 2008. so please suggest me how to install it and which components must be install in Server and in Client machine.
How to connect client machine with the Server 2008 for Sybase.
I followed SUP Installation Guide. But can't get any proper information,
Please reply me.
Regards,
Tapan

Hi Tapan,
You have two options to install SUP 2.0.
1. Cluster installation
     a. Data tier node
     b. Server nodes
2. Single node installation
For Single node installation, all Data Tier and UnwiredPlatform components will be installed on single system. For this you need to launch the installer and proceed with default installation options (you can change ports, etc).
For Cluster installation, on one machine launch the installer and select cluster option and select "installation Data tier node for my cluster" and install it. After this share the Data folder (Under the install directory) to the user who is going to install Server nodes. For Server nodes, launch the installer on diffrent machine and select cluster option and select "installing first server node for my cluster" and enter needed information.
Hope this helps.
Regards,
Abhishek Joshi

Failed to install Officejet Pro 8610 over Ethernet on Windows 8.1 64-bit

When attempting to run the installation of Officejet Pro 8610 using wired Ethernet connection the setup quickly lists the printer with correct IP and MAC address but when this is selected takes ages in the "installing" state and eventually displays a graphic indicating that the connection is broken.
I have tried disabling firewall (ESET) and a clean boot, and have downloaded latest software.
The printer is connected using a cross-over internet cable, can be pinged and obvious is detected by the setup program.
Attempting to install using WiFi has the same results, ie finds printer but then fails (although I haven't retried this since downloading latest software or with a clean boot).
FYI the printer will work when connected using a USB cable. (has been disconnected and software uninstalled before re-trying above). Don't really want to use this as the printer will be too far from normal working position. Wifi would be preferred but cabled Ethernet would be OK.
Also printer works OK via Wifi using e-mail.
Computer is a HP ProBook 4530s which has recently been upgraded to Windows 8.1 Professional x64 with no other significant problems.
Apologies if this is already answered elsewhere but couldn't find any replies which refer to something not already tried.
Thanks

Downloaded and ran the HP Printer Install Wizard for Windows as suggested, still did not work. Here are some screen shots of what happenned
Right Click on Open File Location (step 3) opens the window in the previous screen shot.
I never saw any of the items in step 4, but double clicking the shortcut that was displayed started the same installation process that always fails, see following screen shots. Note I disabled the firewall while running this.

Download issue when Windows 7 Pro joins a Windows Server 2008 Active Directory

Hi,
I purchased 2 new Dell OptiPlex 3010 desktop computers that came with Windows 7 Professional operating system with SP1.
There were no Microsoft updates installed yet. After I added one of these Dell computers to the Windows Server 2008 Active Directory, I was not able to download several items.
Below are several examples:
1) I downloaded the Norton anti-virus installation file. This file is not the full installation of Norton; it is more of a file where you execute it and it will download the full installation from the Internet like from their Norton web
site. So when I executed this installation file, it does not download the full installation files.
It just hung at the screen saying “Downloading” and it will finally stop with an error (don’t remember the error message).
Note: If I have the full Norton installation file then I am able to install it on this computer with no problems.
2) I downloaded the Adobe Reader installation file. This file is not the full installation of Adobe Reader; it is more of a file where you execute it and it will download the full installation from the Internet like from their Adobe web
site. So when I executed this installation file, it hung at the downloading part and then it will error out with a “Actionlist Not Found” message.
Note: If I have the full Adobe Reader installation file then I am able to install it on this computer with no problems.
3) I installed Microsoft Office 2010 Standard version on this computer.
I configured Microsoft Outlook to retrieve emails from my email provider (pop and smtp settings).
After configuring Microsoft Outlook, I was able to send emails through Microsoft Outlook successfully (and very quickly), but he was unable to retrieve my emails. The progress bar for the Receiving in the "Outlook Send/Receive Progress" box
shows no progress. The Progress bar is not moving. There is a message at the bottom of Microsoft Outlook stating "Receiving message 1 of 6 (x.xx KB of x.xx MB)" and it is very slow. My new emails were not being retrieved at all.
I tried various pop and smtp servers that was available for my email provider, but all had the same effect.
4) I can access certain web sites (e.g.
www.yahoo.com, www.cnn.com) while I cannot access other web sites like
www.usatoday.com, my web hosting email site.
Note: I had a Dell computer with Windows XP Professional operating system and this computer does not have any of the above issues.
The above are only a few examples that I have experienced.
If I removed this Dell OptiPlex 3010 computer from the Windows Server 2008 Active Directory then I still experience the same issue.
So as another test, I setup the other new Dell OptiPlex 3010 with the same Windows 7 Professional OS with SP1.
This time, I did not join the Windows Server 2008 Active Directory and I was able to successfully download the full Norton installation files, download the full Adobe Reader installation files, download my emails from Microsoft Outlook 2010, etc.
But once I joined this computer to the Windows Server 2008 Active Directory then I am not able to download these files and emails at all.
It seems like there might be some group policy or a security setting that is preventing these downloads so I disabled the group policy on the Windows Server 2008 AD and Windows 7 Profession OS, but it didn’t resolve the issue.
I disabled all of the firewall programs on this Windows 7 Professional OS, but it still did not resolve the issue.
Since the Windows Server 2008 AD did not have DHCP installed, I installed DHCP and setup a scope.
Then configured the Windows 7 Professional OS to obtain an IP address, but it didn’t resolve the issue.
If I move this Windows 7 Professional computer to another network where it did not have any Active Directory; it just had a wireless router serving DHCP then everything works on the Windows 7 Pro computer.
Any ideas what is the root cause when a Windows 7 Professional computer join a Windows Server 2008 AD?
Thanks,
wl_tech

Hi,
Could you please tell some information for the AD environment and how it connect to the internet?
Regarding 3rd party installlers didn't work as expected, please also seek help in their offical website.
For outlook not receiving emails, could you please take a look in
Event Viewer and see if there are any special errors logged there?
And when trying to access the website like
www.usatoday.com, any special errors IE showed out?
Best regards
Michael Shao
TechNet Community Support

Printing on kyocera's printers wiht acrobat pro XI on windows server 2008 R2

hello there,
Most of our users work
from a TSE server with windows server 2008 R2.
Since we installed acrobat pro XI, it is impossible to print on all our Kyocera printers.
We also use HP, Konica Lexmarlk printers without problems.
Do you have a solution?
Thank for your advices.

Hi Jeffery,
Thank you for your comment.
Yeah, you can use universal print driver by configuring Remote Desktop Easy print on RDS Server. Install the driver on RDS server. Now to configure Easy print you need to have minimum client RDP 6.1(But suggest you to install RDP 8.1), .Net Framework 3.5 or
above and RDSH role.
Also under GPO setting need to check below settings.
Do not allow client print redirection: Disable
Use Terminal Service Easy print printer driver first: Enable
Computer Configuration > Administrative templates > Windows Components > Remote Desktop Services > Remote Desktop Session Host > Printer redirection
For more information, you can refer below articles.
How to configure Microsoft RDS Universal Printing
http://www.virtualizationadmin.com/articles-tutorials/vdi-articles/microsoft-hyper-v/how-configure-microsoft-rds-universal-printing.html
Using Remote Desktop Easy Print in Windows 7 and Windows Server 2008 R2
http://blogs.msdn.com/b/rds/archive/2009/09/28/using-remote-desktop-easy-print-in-windows-7-and-windows-server-2008-r2.aspx?Redirected=true
Hope it helps!
Thanks.
Dharmesh Solanki

Installing OfficeJet Pro 8610

I am setting up a brand new officejet pro 8610 via usb, once I reach the stage where the software asks to connect the usb, I notice in the lower right next to the time, the device installation starts. Upon clicking on it, I see drivers being search for by windows updates, then one of them fails with a rex x. After this the hp software now tells me the install was unsuccessful. Is the point of the software not to install the drivers or am I missing something? Any workarounds for this? I am now getting into tech stuff so any explanations into what happens there when the device is plugged in would be helpful.

Are you using the Product Installation Software from this site
http://support.hp.com/us-en/product/HP-Officejet-Pro-8610-e-All-in-One-Printer-series/5367603/model/...
It should not be using Windows Update as it installs its own drivers.
Please mark my post as SOLVED if it has resolved your problem. It helps others with similar situations.

Problem installing sharepoint foundation 2013 on windows server 2008 r2

anybody has experience installing sharepoint 2013 on windows server 2008 r2? I failed to install it even if I have all the latest patches installed and the sql server 2012 express installed. it keeps failing to install the prerequisites.
• Microsoft .NET Framework 4.5: equivalent products already installed (no action taken)
• Windows Management Framework 3.0: was already installed (no action taken)
• Application Server Role, Web Server (IIS) Role: configuration error
• Microsoft SQL Server 2008 R2 SP1 Native Client: Installation skipped
• Windows Identity Foundation (KB974405): Installation skipped
• Microsoft Sync Framework Runtime v1.0 SP1 (x64): Installation skipped
• Windows Server AppFabric: Installation skipped
• Microsoft Identity Extensions: Installation skipped
• Microsoft Information Protection and Control Client: Installation skipped
• Microsoft WCF Data Services 5.0: Installation skipped
• Cumulative Update Package 1 for Microsoft AppFabric 1.1 for Windows Server (KB2671763): Installation skipped
log file:
2014-04-30 17:32:32 - Processor architecture is (9)
2014-04-30 17:32:32 - Reading the following string value/name...
2014-04-30 17:32:32 - Common Startup
2014-04-30 17:32:32 - from the following registry location...
2014-04-30 17:32:32 - SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\Shell Folders
2014-04-30 17:32:32 - The value is...
2014-04-30 17:32:32 - C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Startup
2014-04-30 17:32:32 - Trying to remove the startup task if there is any.
2014-04-30 17:32:32 - C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Startup\SharePointServerPreparationToolStartup_0FF1CE14-0000-0000-0000-000000000000.cmd
2014-04-30 17:32:32 - Error: Startup task doesn't exist. This is not a continuation after a restart.
2014-04-30 17:32:32 - Locating the following command line arguments file:
2014-04-30 17:32:32 - C:\Program Files (x86)\MSECache\SharePoint2010\PrerequisiteInstaller.Arguments.txt
2014-04-30 17:32:32 - Error: This file does not exist
2014-04-30 17:32:32 - Details of the current operating system:
2014-04-30 17:32:32 - Major version number of the operating system: (6)
2014-04-30 17:32:32 - Minor version number of the operating system: (1)
2014-04-30 17:32:32 - Build number of the operating system: (0X1DB1=7601)
2014-04-30 17:32:32 - Major version number of the latest Service Pack: (1)
2014-04-30 17:32:32 - Minor version number of the latest Service Pack: (0)
2014-04-30 17:32:32 - Platform ID of the operating system: (2)
2014-04-30 17:32:32 - Product suites available on the operating system: (0X10=16)
2014-04-30 17:32:32 - Product type of the operating system: VER_NT_DOMAIN_CONROLLER
2014-04-30 17:32:32 - Product type: (0X21=33)
2014-04-30 17:32:32 - OS type: (0)
2014-04-30 17:32:32 - Configuring the application's property sheet...
2014-04-30 17:32:32 - Check whether the following prerequisite is installed:
2014-04-30 17:32:32 - Windows Management Framework 3.0
2014-04-30 17:32:32 - Reading the following string value/name...
2014-04-30 17:32:32 - PowerShellVersion
2014-04-30 17:32:32 - from the following registry location...
2014-04-30 17:32:32 - SOFTWARE\Microsoft\PowerShell\3\PowerShellEngine
2014-04-30 17:32:32 - The value is...
2014-04-30 17:32:32 - 3.0
2014-04-30 17:32:32 - Reading the following string value/name...
2014-04-30 17:32:32 - CTPVersion
2014-04-30 17:32:32 - from the following registry location...
2014-04-30 17:32:32 - SOFTWARE\Microsoft\PowerShell\3\PowerShellEngine
2014-04-30 17:32:32 - Could not find or unable to read CTPVersion key
2014-04-30 17:32:32 - The prerequisite above is already installed
2014-04-30 17:32:32 - Check whether the following prerequisite is installed:
2014-04-30 17:32:32 - Microsoft .NET Framework 4.5
2014-04-30 17:32:32 - Reading the following DWORD value/name...
2014-04-30 17:32:32 - Install
2014-04-30 17:32:32 - from the following registry location...
2014-04-30 17:32:32 - SOFTWARE\Microsoft\Net Framework Setup\NDP\V4\full
2014-04-30 17:32:32 - The value is (1)
2014-04-30 17:32:32 - Reading the following string value/name...
2014-04-30 17:32:32 - Version
2014-04-30 17:32:32 - from the following registry location...
2014-04-30 17:32:32 - SOFTWARE\Microsoft\Net Framework Setup\NDP\V4\full
2014-04-30 17:32:32 - The value is...
2014-04-30 17:32:32 - 4.5.50938
2014-04-30 17:32:32 - A post release .NET 4.5 is installed
2014-04-30 17:32:32 - Check whether the following prerequisite is installed:
2014-04-30 17:32:32 - Windows Identity Foundation (KB974405)
2014-04-30 17:32:32 - Reading the following string value/name...
2014-04-30 17:32:32 -
2014-04-30 17:32:32 - from the following registry location...
2014-04-30 17:32:32 - SOFTWARE\Microsoft\Windows Identity Foundation\Setup\v3.5
2014-04-30 17:32:32 - Check whether the following prerequisite is installed:
2014-04-30 17:32:32 - Microsoft Sync Framework Runtime v1.0 SP1 (x64)
2014-04-30 17:32:32 - Reading version of the following file...
2014-04-30 17:32:32 - C:\Windows\assembly\GAC_MSIL\Microsoft.Synchronization\1.0.0.0__89845dcd8080cc91\Microsoft.Synchronization.dll
2014-04-30 17:32:32 - GetFileVersionInfoSize failed (-2147024894)
2014-04-30 17:32:32 - Check whether the following prerequisite is installed:
2014-04-30 17:32:32 - Microsoft SQL Server 2008 R2 SP1 Native Client
2014-04-30 17:32:32 - Reading the following string value/name...
2014-04-30 17:32:32 - Version
2014-04-30 17:32:32 - from the following registry location...
2014-04-30 17:32:32 - SOFTWARE\Microsoft\Microsoft SQL Server\SQLNCLI10\CurrentVersion
2014-04-30 17:32:32 - Check whether the following prerequisite is installed:
2014-04-30 17:32:32 - Windows Server AppFabric
2014-04-30 17:32:32 - Reading the following string value/name...
2014-04-30 17:32:32 - ProductVersion
2014-04-30 17:32:32 - from the following registry location...
2014-04-30 17:32:32 - SOFTWARE\Microsoft\AppFabric\V1.0
2014-04-30 17:32:32 - Check whether the following prerequisite is installed:
2014-04-30 17:32:32 - Windows Identity Foundation (KB974405)
2014-04-30 17:32:32 - Reading the following string value/name...
2014-04-30 17:32:32 -
2014-04-30 17:32:32 - from the following registry location...
2014-04-30 17:32:32 - SOFTWARE\Microsoft\Microsoft Identity Extensions\Setup\1.0
2014-04-30 17:32:32 - Check whether the following prerequisite is installed:
2014-04-30 17:32:32 - Microsoft Information Protection and Control Client
2014-04-30 17:32:32 - Reading the following string value/name...
2014-04-30 17:32:32 -
2014-04-30 17:32:32 - from the following registry location...
2014-04-30 17:32:32 - SOFTWARE\Microsoft\MSIPC\CurrentVersion
2014-04-30 17:32:32 - Check whether the following prerequisite is installed:
2014-04-30 17:32:32 - Microsoft WCF Data Services 5.0
2014-04-30 17:32:32 - Reading the following string value/name...
2014-04-30 17:32:32 - Version
2014-04-30 17:32:32 - from the following registry location...
2014-04-30 17:32:32 - SOFTWARE\Wow6432Node\Microsoft\Microsoft WCF Data Services\5.0
2014-04-30 17:32:32 - Check whether the following prerequisite is installed:
2014-04-30 17:32:32 - Cumulative Update Package 1 for Microsoft AppFabric 1.1 for Windows Server (KB2671763)
2014-04-30 17:32:32 - Reading the following DWORD value/name...
2014-04-30 17:32:32 - IsInstalled
2014-04-30 17:32:32 - from the following registry location...
2014-04-30 17:32:32 - SOFTWARE\Wow6432Node\Microsoft\Updates\AppFabric 1.1 for Windows Server\KB2671763
2014-04-30 17:32:38 - Beginning download/installation
2014-04-30 17:32:38 - Created thread for installer
2014-04-30 17:32:38 - "C:\Windows\system32\ServerManagerCmd.exe" -inputpath "C:\Users\ADMINI~1\AppData\Local\Temp\1\Pre2AD9.tmp.XML"
2014-04-30 17:32:38 - Install process returned (0X3EB=1003)
2014-04-30 17:32:38 - [In HRESULT format] (0X800703EB=-2147023893)
2014-04-30 17:32:38 - "C:\Windows\Microsoft.NET\Framework64\v4.0.30319\aspnet_regiis.exe" -i
2014-04-30 17:32:39 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-04-30 17:32:40 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-04-30 17:32:41 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-04-30 17:32:42 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-04-30 17:32:43 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-04-30 17:32:44 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-04-30 17:32:45 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-04-30 17:32:46 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-04-30 17:32:47 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-04-30 17:32:48 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-04-30 17:32:49 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-04-30 17:32:50 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-04-30 17:32:51 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-04-30 17:32:52 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-04-30 17:32:53 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-04-30 17:32:53 - Install process returned (0)
2014-04-30 17:32:53 - [In HRESULT format] (0)
2014-04-30 17:32:53 - "C:\Windows\system32\cscript.exe" "C:\Windows\system32\iisext.vbs" /enext "ASP.NET v4.0.30319"
2014-04-30 17:32:54 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-04-30 17:32:55 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-04-30 17:32:56 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-04-30 17:32:57 - Install process returned (-2146646015)
2014-04-30 17:32:57 - [In HRESULT format] (-2146646015)
2014-04-30 17:32:57 - Error when enabling ASP.NET v4.0.30319
2014-04-30 17:32:57 - Last return code (-2146646015)
2014-04-30 17:32:57 - Reading the following DWORD value/name...
2014-04-30 17:32:57 - Flags
2014-04-30 17:32:57 - from the following registry location...
2014-04-30 17:32:57 - SOFTWARE\Microsoft\Updates\UpdateExeVolatile
2014-04-30 17:32:57 - Reading the following string value/name...
2014-04-30 17:32:57 - PendingFileRenameOperations
2014-04-30 17:32:57 - from the following registry location...
2014-04-30 17:32:57 - SYSTEM\CurrentControlSet\Control\Session Manager
2014-04-30 17:32:57 - Reading the following registry location...
2014-04-30 17:32:57 - SOFTWARE\Microsoft\Windows\CurrentVersion\WindowsUpdate\Auto Update\RebootRequired
2014-04-30 17:32:57 - Error: The tool was unable to install Application Server Role, Web Server (IIS) Role.
2014-04-30 17:32:57 - Last return code (-2146646015)
2014-04-30 17:32:57 - Options for further diagnostics: 1. Look up the return code value 2. Download the prerequisite manually and verify size downloaded by the prerequisite installer. 3. Install the prerequisite manually from the given location without any
command line options.
2014-04-30 17:32:57 - Cannot retry
2014-04-30 17:32:57 - Check whether the following prerequisite is installed:
2014-04-30 17:32:57 - Windows Management Framework 3.0
2014-04-30 17:32:57 - Reading the following string value/name...
2014-04-30 17:32:57 - PowerShellVersion
2014-04-30 17:32:57 - from the following registry location...
2014-04-30 17:32:57 - SOFTWARE\Microsoft\PowerShell\3\PowerShellEngine
2014-04-30 17:32:57 - The value is...
2014-04-30 17:32:57 - 3.0
2014-04-30 17:32:57 - Reading the following string value/name...
2014-04-30 17:32:57 - CTPVersion
2014-04-30 17:32:57 - from the following registry location...
2014-04-30 17:32:57 - SOFTWARE\Microsoft\PowerShell\3\PowerShellEngine
2014-04-30 17:32:57 - Could not find or unable to read CTPVersion key
2014-04-30 17:32:57 - The prerequisite above is already installed
2014-04-30 17:32:57 - Check whether the following prerequisite is installed:
2014-04-30 17:32:57 - Microsoft .NET Framework 4.5
2014-04-30 17:32:57 - Reading the following DWORD value/name...
2014-04-30 17:32:57 - Install
2014-04-30 17:32:57 - from the following registry location...
2014-04-30 17:32:57 - SOFTWARE\Microsoft\Net Framework Setup\NDP\V4\full
2014-04-30 17:32:57 - The value is (1)
2014-04-30 17:32:57 - Reading the following string value/name...
2014-04-30 17:32:57 - Version
2014-04-30 17:32:57 - from the following registry location...
2014-04-30 17:32:57 - SOFTWARE\Microsoft\Net Framework Setup\NDP\V4\full
2014-04-30 17:32:57 - The value is...
2014-04-30 17:32:57 - 4.5.50938
2014-04-30 17:32:57 - A post release .NET 4.5 is installed
2014-04-30 17:32:57 - Check whether the following prerequisite is installed:
2014-04-30 17:32:57 - Windows Identity Foundation (KB974405)
2014-04-30 17:32:57 - Reading the following string value/name...
2014-04-30 17:32:57 -
2014-04-30 17:32:57 - from the following registry location...
2014-04-30 17:32:57 - SOFTWARE\Microsoft\Windows Identity Foundation\Setup\v3.5
2014-04-30 17:32:57 - Check whether the following prerequisite is installed:
2014-04-30 17:32:57 - Microsoft Sync Framework Runtime v1.0 SP1 (x64)
2014-04-30 17:32:57 - Reading version of the following file...
2014-04-30 17:32:57 - C:\Windows\assembly\GAC_MSIL\Microsoft.Synchronization\1.0.0.0__89845dcd8080cc91\Microsoft.Synchronization.dll
2014-04-30 17:32:57 - GetFileVersionInfoSize failed (-2147024894)
2014-04-30 17:32:57 - Check whether the following prerequisite is installed:
2014-04-30 17:32:57 - Microsoft SQL Server 2008 R2 SP1 Native Client
2014-04-30 17:32:57 - Reading the following string value/name...
2014-04-30 17:32:57 - Version
2014-04-30 17:32:57 - from the following registry location...
2014-04-30 17:32:57 - SOFTWARE\Microsoft\Microsoft SQL Server\SQLNCLI10\CurrentVersion
2014-04-30 17:32:57 - Check whether the following prerequisite is installed:
2014-04-30 17:32:57 - Windows Server AppFabric
2014-04-30 17:32:57 - Reading the following string value/name...
2014-04-30 17:32:57 - ProductVersion
2014-04-30 17:32:57 - from the following registry location...
2014-04-30 17:32:57 - SOFTWARE\Microsoft\AppFabric\V1.0
2014-04-30 17:32:57 - Check whether the following prerequisite is installed:
2014-04-30 17:32:57 - Windows Identity Foundation (KB974405)
2014-04-30 17:32:57 - Reading the following string value/name...
2014-04-30 17:32:57 -
2014-04-30 17:32:57 - from the following registry location...
2014-04-30 17:32:57 - SOFTWARE\Microsoft\Microsoft Identity Extensions\Setup\1.0
2014-04-30 17:32:57 - Check whether the following prerequisite is installed:
2014-04-30 17:32:57 - Microsoft Information Protection and Control Client
2014-04-30 17:32:57 - Reading the following string value/name...
2014-04-30 17:32:57 -
2014-04-30 17:32:57 - from the following registry location...
2014-04-30 17:32:57 - SOFTWARE\Microsoft\MSIPC\CurrentVersion
2014-04-30 17:32:57 - Check whether the following prerequisite is installed:
2014-04-30 17:32:57 - Microsoft WCF Data Services 5.0
2014-04-30 17:32:57 - Reading the following string value/name...
2014-04-30 17:32:57 - Version
2014-04-30 17:32:57 - from the following registry location...
2014-04-30 17:32:57 - SOFTWARE\Wow6432Node\Microsoft\Microsoft WCF Data Services\5.0
2014-04-30 17:32:57 - Check whether the following prerequisite is installed:
2014-04-30 17:32:57 - Cumulative Update Package 1 for Microsoft AppFabric 1.1 for Windows Server (KB2671763)
2014-04-30 17:32:57 - Reading the following DWORD value/name...
2014-04-30 17:32:57 - IsInstalled
2014-04-30 17:32:57 - from the following registry location...
2014-04-30 17:32:57 - SOFTWARE\Wow6432Node\Microsoft\Updates\AppFabric 1.1 for Windows Server\KB2671763
2014-04-30 17:33:21 - Opening log file
2014-04-30 17:33:21 - Opened action for user
2014-04-30 17:33:21 - C:\Users\ADMINI~1\AppData\Local\Temp\1\prerequisiteinstaller.2014.04.30-17.32.32.log

2014-06-20 08:18:39 - Processor architecture is (9)
2014-06-20 08:18:39 - Reading the following string value/name...
2014-06-20 08:18:39 - Common Startup
2014-06-20 08:18:39 - from the following registry location...
2014-06-20 08:18:39 - SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\Shell Folders
2014-06-20 08:18:39 - The value is...
2014-06-20 08:18:39 - C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Startup
2014-06-20 08:18:39 - Trying to remove the startup task if there is any.
2014-06-20 08:18:39 - C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Startup\SharePointServerPreparationToolStartup_0FF1CE14-0000-0000-0000-000000000000.cmd
2014-06-20 08:18:39 - Error: Startup task doesn't exist. This is not a continuation after a restart.
2014-06-20 08:18:39 - Locating the following command line arguments file:
2014-06-20 08:18:39 - C:\Program Files (x86)\MSECache\SharePoint2010\PrerequisiteInstaller.Arguments.txt
2014-06-20 08:18:39 - Error: This file does not exist
2014-06-20 08:18:39 - Details of the current operating system:
2014-06-20 08:18:39 - Major version number of the operating system: (6)
2014-06-20 08:18:39 - Minor version number of the operating system: (1)
2014-06-20 08:18:39 - Build number of the operating system: (0X1DB1=7601)
2014-06-20 08:18:39 - Major version number of the latest Service Pack: (1)
2014-06-20 08:18:39 - Minor version number of the latest Service Pack: (0)
2014-06-20 08:18:39 - Platform ID of the operating system: (2)
2014-06-20 08:18:39 - Product suites available on the operating system: (0X10=16)
2014-06-20 08:18:39 - Product type of the operating system: VER_NT_DOMAIN_CONROLLER
2014-06-20 08:18:39 - Product type: (0X21=33)
2014-06-20 08:18:39 - OS type: (0)
2014-06-20 08:18:39 - Configuring the application's property sheet...
2014-06-20 08:18:39 - Check whether the following prerequisite is installed:
2014-06-20 08:18:39 - Windows Management Framework 3.0
2014-06-20 08:18:39 - Reading the following string value/name...
2014-06-20 08:18:39 - PowerShellVersion
2014-06-20 08:18:39 - from the following registry location...
2014-06-20 08:18:39 - SOFTWARE\Microsoft\PowerShell\3\PowerShellEngine
2014-06-20 08:18:39 - The value is...
2014-06-20 08:18:39 - 4.0
2014-06-20 08:18:39 - A higher version of the prerequisite above is already installed
2014-06-20 08:18:39 - Check whether the following prerequisite is installed:
2014-06-20 08:18:39 - Microsoft .NET Framework 4.5
2014-06-20 08:18:39 - Reading the following DWORD value/name...
2014-06-20 08:18:39 - Install
2014-06-20 08:18:39 - from the following registry location...
2014-06-20 08:18:39 - SOFTWARE\Microsoft\Net Framework Setup\NDP\V4\full
2014-06-20 08:18:39 - The value is (1)
2014-06-20 08:18:39 - Reading the following string value/name...
2014-06-20 08:18:39 - Version
2014-06-20 08:18:39 - from the following registry location...
2014-06-20 08:18:39 - SOFTWARE\Microsoft\Net Framework Setup\NDP\V4\full
2014-06-20 08:18:39 - The value is...
2014-06-20 08:18:39 - 4.5.50938
2014-06-20 08:18:39 - A post release .NET 4.5 is installed
2014-06-20 08:18:39 - Check whether the following prerequisite is installed:
2014-06-20 08:18:39 - Windows Identity Foundation (KB974405)
2014-06-20 08:18:39 - Reading the following string value/name...
2014-06-20 08:18:39 -
2014-06-20 08:18:39 - from the following registry location...
2014-06-20 08:18:39 - SOFTWARE\Microsoft\Windows Identity Foundation\Setup\v3.5
2014-06-20 08:18:39 - The value is...
2014-06-20 08:18:39 - 6.1.7600.0
2014-06-20 08:18:39 - The prerequisite above is already installed
2014-06-20 08:18:39 - Check whether the following prerequisite is installed:
2014-06-20 08:18:39 - Microsoft Sync Framework Runtime v1.0 SP1 (x64)
2014-06-20 08:18:39 - Reading version of the following file...
2014-06-20 08:18:39 - C:\Windows\assembly\GAC_MSIL\Microsoft.Synchronization\1.0.0.0__89845dcd8080cc91\Microsoft.Synchronization.dll
2014-06-20 08:18:39 - The version is...
2014-06-20 08:18:39 - 1.0.1215.0
2014-06-20 08:18:39 - Check whether the following prerequisite is installed:
2014-06-20 08:18:39 - Microsoft SQL Server 2008 R2 SP1 Native Client
2014-06-20 08:18:39 - Reading the following string value/name...
2014-06-20 08:18:39 - Version
2014-06-20 08:18:39 - from the following registry location...
2014-06-20 08:18:39 - SOFTWARE\Microsoft\Microsoft SQL Server\SQLNCLI10\CurrentVersion
2014-06-20 08:18:39 - The value is...
2014-06-20 08:18:39 - 10.0.1600.22
2014-06-20 08:18:39 - Check whether the following prerequisite is installed:
2014-06-20 08:18:39 - Windows Server AppFabric
2014-06-20 08:18:39 - Reading the following string value/name...
2014-06-20 08:18:40 - ProductVersion
2014-06-20 08:18:40 - from the following registry location...
2014-06-20 08:18:40 - SOFTWARE\Microsoft\AppFabric\V1.0
2014-06-20 08:18:40 - Check whether the following prerequisite is installed:
2014-06-20 08:18:40 - Windows Identity Foundation (KB974405)
2014-06-20 08:18:40 - Reading the following string value/name...
2014-06-20 08:18:40 -
2014-06-20 08:18:40 - from the following registry location...
2014-06-20 08:18:40 - SOFTWARE\Microsoft\Microsoft Identity Extensions\Setup\1.0
2014-06-20 08:18:40 - Check whether the following prerequisite is installed:
2014-06-20 08:18:40 - Microsoft Information Protection and Control Client
2014-06-20 08:18:40 - Reading the following string value/name...
2014-06-20 08:18:40 -
2014-06-20 08:18:40 - from the following registry location...
2014-06-20 08:18:40 - SOFTWARE\Microsoft\MSIPC\CurrentVersion
2014-06-20 08:18:40 - Check whether the following prerequisite is installed:
2014-06-20 08:18:40 - Microsoft WCF Data Services 5.0
2014-06-20 08:18:40 - Reading the following string value/name...
2014-06-20 08:18:40 - Version
2014-06-20 08:18:40 - from the following registry location...
2014-06-20 08:18:40 - SOFTWARE\Wow6432Node\Microsoft\Microsoft WCF Data Services\5.0
2014-06-20 08:18:40 - Check whether the following prerequisite is installed:
2014-06-20 08:18:40 - Cumulative Update Package 1 for Microsoft AppFabric 1.1 for Windows Server (KB2671763)
2014-06-20 08:18:40 - Reading the following DWORD value/name...
2014-06-20 08:18:40 - IsInstalled
2014-06-20 08:18:40 - from the following registry location...
2014-06-20 08:18:40 - SOFTWARE\Wow6432Node\Microsoft\Updates\AppFabric 1.1 for Windows Server\KB2671763
2014-06-20 08:18:44 - Beginning download/installation
2014-06-20 08:18:44 - Created thread for installer
2014-06-20 08:18:44 - "C:\Windows\system32\ServerManagerCmd.exe" -inputpath "C:\Users\ADMINI~1\AppData\Local\Temp\2\Pre6515.tmp.XML"
2014-06-20 08:18:45 - Install process returned (0X3EB=1003)
2014-06-20 08:18:45 - [In HRESULT format] (0X800703EB=-2147023893)
2014-06-20 08:18:45 - "C:\Windows\Microsoft.NET\Framework64\v4.0.30319\aspnet_regiis.exe" -i
2014-06-20 08:18:45 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-06-20 08:18:46 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-06-20 08:18:47 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-06-20 08:18:48 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-06-20 08:18:49 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-06-20 08:18:50 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-06-20 08:18:51 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-06-20 08:18:52 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-06-20 08:18:53 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-06-20 08:18:54 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-06-20 08:18:55 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-06-20 08:18:56 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-06-20 08:18:57 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-06-20 08:18:58 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-06-20 08:18:59 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-06-20 08:19:00 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-06-20 08:19:01 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-06-20 08:19:02 - Install process returned (0)
2014-06-20 08:19:02 - [In HRESULT format] (0)
2014-06-20 08:19:02 - "C:\Windows\system32\cscript.exe" "C:\Windows\system32\iisext.vbs" /enext "ASP.NET v4.0.30319"
2014-06-20 08:19:02 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-06-20 08:19:03 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-06-20 08:19:04 - Install process returned (-2146646015)
2014-06-20 08:19:04 - [In HRESULT format] (-2146646015)
2014-06-20 08:19:04 - Error when enabling ASP.NET v4.0.30319
2014-06-20 08:19:04 - Last return code (-2146646015)
2014-06-20 08:19:04 - Reading the following DWORD value/name...
2014-06-20 08:19:04 - Flags
2014-06-20 08:19:04 - from the following registry location...
2014-06-20 08:19:04 - SOFTWARE\Microsoft\Updates\UpdateExeVolatile
2014-06-20 08:19:04 - Reading the following string value/name...
2014-06-20 08:19:04 - PendingFileRenameOperations
2014-06-20 08:19:04 - from the following registry location...
2014-06-20 08:19:04 - SYSTEM\CurrentControlSet\Control\Session Manager
2014-06-20 08:19:04 - Reading the following registry location...
2014-06-20 08:19:04 - SOFTWARE\Microsoft\Windows\CurrentVersion\WindowsUpdate\Auto Update\RebootRequired
2014-06-20 08:19:04 - Error: The tool was unable to install Application Server Role, Web Server (IIS) Role.
2014-06-20 08:19:04 - Last return code (-2146646015)
2014-06-20 08:19:04 - Options for further diagnostics: 1. Look up the return code value 2. Download the prerequisite manually and verify size downloaded by the prerequisite installer. 3. Install the prerequisite manually from the given location without any
command line options.
2014-06-20 08:19:04 - Cannot retry
2014-06-20 08:19:04 - Check whether the following prerequisite is installed:
2014-06-20 08:19:04 - Windows Management Framework 3.0
2014-06-20 08:19:04 - Reading the following string value/name...
2014-06-20 08:19:04 - PowerShellVersion
2014-06-20 08:19:04 - from the following registry location...
2014-06-20 08:19:04 - SOFTWARE\Microsoft\PowerShell\3\PowerShellEngine
2014-06-20 08:19:04 - The value is...
2014-06-20 08:19:04 - 4.0
2014-06-20 08:19:04 - A higher version of the prerequisite above is already installed
2014-06-20 08:19:04 - Check whether the following prerequisite is installed:
2014-06-20 08:19:04 - Microsoft .NET Framework 4.5
2014-06-20 08:19:04 - Reading the following DWORD value/name...
2014-06-20 08:19:04 - Install
2014-06-20 08:19:04 - from the following registry location...
2014-06-20 08:19:04 - SOFTWARE\Microsoft\Net Framework Setup\NDP\V4\full
2014-06-20 08:19:04 - The value is (1)
2014-06-20 08:19:04 - Reading the following string value/name...
2014-06-20 08:19:04 - Version
2014-06-20 08:19:04 - from the following registry location...
2014-06-20 08:19:04 - SOFTWARE\Microsoft\Net Framework Setup\NDP\V4\full
2014-06-20 08:19:04 - The value is...
2014-06-20 08:19:04 - 4.5.50938
2014-06-20 08:19:04 - A post release .NET 4.5 is installed
2014-06-20 08:19:04 - Check whether the following prerequisite is installed:
2014-06-20 08:19:04 - Windows Identity Foundation (KB974405)
2014-06-20 08:19:04 - Reading the following string value/name...
2014-06-20 08:19:04 -
2014-06-20 08:19:04 - from the following registry location...
2014-06-20 08:19:04 - SOFTWARE\Microsoft\Windows Identity Foundation\Setup\v3.5
2014-06-20 08:19:04 - The value is...
2014-06-20 08:19:04 - 6.1.7600.0
2014-06-20 08:19:04 - The prerequisite above is already installed
2014-06-20 08:19:04 - Check whether the following prerequisite is installed:
2014-06-20 08:19:04 - Microsoft Sync Framework Runtime v1.0 SP1 (x64)
2014-06-20 08:19:04 - Reading version of the following file...
2014-06-20 08:19:04 - C:\Windows\assembly\GAC_MSIL\Microsoft.Synchronization\1.0.0.0__89845dcd8080cc91\Microsoft.Synchronization.dll
2014-06-20 08:19:04 - The version is...
2014-06-20 08:19:04 - 1.0.1215.0
2014-06-20 08:19:04 - Check whether the following prerequisite is installed:
2014-06-20 08:19:04 - Microsoft SQL Server 2008 R2 SP1 Native Client
2014-06-20 08:19:04 - Reading the following string value/name...
2014-06-20 08:19:04 - Version
2014-06-20 08:19:04 - from the following registry location...
2014-06-20 08:19:04 - SOFTWARE\Microsoft\Microsoft SQL Server\SQLNCLI10\CurrentVersion
2014-06-20 08:19:04 - The value is...
2014-06-20 08:19:04 - 10.0.1600.22
2014-06-20 08:19:04 - Check whether the following prerequisite is installed:
2014-06-20 08:19:04 - Windows Server AppFabric
2014-06-20 08:19:04 - Reading the following string value/name...
2014-06-20 08:19:04 - ProductVersion
2014-06-20 08:19:04 - from the following registry location...
2014-06-20 08:19:04 - SOFTWARE\Microsoft\AppFabric\V1.0
2014-06-20 08:19:04 - Check whether the following prerequisite is installed:
2014-06-20 08:19:04 - Windows Identity Foundation (KB974405)
2014-06-20 08:19:04 - Reading the following string value/name...
2014-06-20 08:19:04 -
2014-06-20 08:19:04 - from the following registry location...
2014-06-20 08:19:04 - SOFTWARE\Microsoft\Microsoft Identity Extensions\Setup\1.0
2014-06-20 08:19:04 - Check whether the following prerequisite is installed:
2014-06-20 08:19:04 - Microsoft Information Protection and Control Client
2014-06-20 08:19:04 - Reading the following string value/name...
2014-06-20 08:19:04 -
2014-06-20 08:19:04 - from the following registry location...
2014-06-20 08:19:04 - SOFTWARE\Microsoft\MSIPC\CurrentVersion
2014-06-20 08:19:04 - Check whether the following prerequisite is installed:
2014-06-20 08:19:04 - Microsoft WCF Data Services 5.0
2014-06-20 08:19:04 - Reading the following string value/name...
2014-06-20 08:19:04 - Version
2014-06-20 08:19:04 - from the following registry location...
2014-06-20 08:19:04 - SOFTWARE\Wow6432Node\Microsoft\Microsoft WCF Data Services\5.0
2014-06-20 08:19:04 - Check whether the following prerequisite is installed:
2014-06-20 08:19:04 - Cumulative Update Package 1 for Microsoft AppFabric 1.1 for Windows Server (KB2671763)
2014-06-20 08:19:04 - Reading the following DWORD value/name...
2014-06-20 08:19:04 - IsInstalled
2014-06-20 08:19:04 - from the following registry location...
2014-06-20 08:19:04 - SOFTWARE\Wow6432Node\Microsoft\Updates\AppFabric 1.1 for Windows Server\KB2671763
2014-06-20 08:19:45 - Opening log file
2014-06-20 08:19:45 - Opened action for user
2014-06-20 08:19:45 - C:\Users\ADMINI~1\AppData\Local\Temp\2\prerequisiteinstaller.2014.06.20-08.18.39.log

Unable to install Directory Sync tool in windows server 2008 R2 Eneterprise

Hi,
I am unable to install Directory Sync in windows server 2008 R2 Eneterprise.i have joined my machine domain joined computer running Windows Server 2008 r2 enterprise,when i click dirsync.exe then gives below Error.
The Windows Azure Active Directory Sync tool must be installed on a domain joined computer running Windows Server 2008 Service Pack 2 or later,or Windows Server 2008 r2 Service Pack 1 or later
Please help on this why this happing when i try to installed DirSync software.
Regards
Anil Kumar

Hi,
have you already installed .net framwork 3.5 and 4.5.1 on that machine?
http://technet.microsoft.com/en-us/library/jj151831.aspx
Also make sure that you run the install command from an elevated command prompt.
Hope that helps,
Lutz

Installing forms 11gr2 services on windows server 2008 r2 64 bit

hello,
I successfully installed on windows 7 64 bit my developer forms & reports 11gR2 with weblogic 10.3.5 , jdk 1.6.0_+.
Now i want to install in it in windows server 2008 R2 64bit, to deploy the application i created as a test.
Question.
1. Can I used the same installation set up , step, procedure as the development mode by only changing the installation mode to production mode in windows 2008R2?
1.1 Do I need to create domain first after install the weblogic or it is like the development mode that the FRM_installation will create its classic domain?
2. Can I used it without the fusion middleware?
3. It is compatible version for forms 11gr2 for Oracle Fusion Middleware 11g Release 1 (11.1.1.6.0) ? << doubted not compatible.
4. It is valid if i only install weblogic server 10.3.5 without the fusion middleware? Am I or other clients can able to access it?
5. It is will be a AS server even if without the repository creation?
Note : i only need the forms&report server services to run our application on windows server 2008 R2 64 bit and compile respectedly.
I ve done it with OAS 10g before but different procedures now since forms 11gr2 is using now weblogic server.
Thank you very much.

... i want to install in it ... , to deploy the application i created as a test If you chose the "Development" install option during the installation of 11.1.2 you would have everything you needed to run your form. The only significant difference between the Dev and Deploy installation is the that in the Dev install type the Forms and Reports Servlets are deployed into the Admin server Managed server rather than creating a unique one for each. For local testing purposes, this should be sufficient for most cases. If on the other hand you need a full installation (Deployment), I would recommend that you choose this option, but be sure to also include the Builders. The Builders are available for both install types. I would not recommend attempting to have both install types installed together although it likely can be done. Having both installed would likely create confusion and difficulty during troubleshooting.
Important point. If you choose the Deployment option and include the Builders during that installation, you do not need to start everything in order to run a form. All that is needed is WLS_FORMS. All other processes can be stopped if system resources is a concern. For an actual production deployment, it is recommended that you route end-user requests through HTTP Server, but this is not required unless you plan to use SSO or other feature that is managed through HTTP Server.

Install Sharepoint 2013 Foundation on Windows Server 2008 R2

Could anyone please help me with the steps to install the Sharepoint 2013 foundation (including SQL express) with Windows Server 2008 R2 ?

You just need to download Foundation, run the pre-req installer, then run the setup executable, select Single Server, and this will install both SQL Express and Foundation. This isn't typically a 'recommended' setup, but it is an easy one.
Trevor Seward, MCC
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Get-Hotfix InstalledOn property not returning hotfix installed Date and Time on Windows Server 2008 SP2 but works on Windows Server 2008 R2 SP1

Hi,
I am working on a validation script to get the list of hotfixes installed on Domain Controllers every month as part of our monthly DC patching process. I have been successful in getting these details for DC's with (Windows Server 2008
R2 SP1, Powershell v2.0) using the below command.
Get-HotFix -cn $computer | Select-Object PSComputerName,HotFixID,Description,InstalledBy,InstalledOn | where InstalledOn -ge (Get-Date -Day 1 -Format d) | FT -AutoSize
I execute the above from a jump box with powershell v4.0 (Server 2008 R2)
However, when I try the same command from the jump box to query DC's with (Server 2008 SP2, powershell v2.0). It doesn't return the InstalledOn date and time. It was giving error for the InstalledOn property and hence I renamed it to $_.InstalledOn. Now
I don't get error but still no details displayed for InstalledOn property.
I tried using the below, as could see on few forums that this might resolve the issue. I also tried removing the "where" part but still no installation date returned.
Get-HotFix -cn $computer | Select-Object HotFixID, Description, InstalledBy, @{l="InstalledOn";e={[DateTime]::Parse($_.psbase.properties["installedon"].value,$([System.Globalization.CultureInfo]::GetCultureInfo("en-US")))}}
| where {$_.InstalledOn -ge (Get-Date -Day 1 -Format d)} | FT -AutoSize
Have tried this locally on the 2008 SP2 DC but still not working. Please advise what is going wrong?
Note: If I execute the below command locally on the 2008 SP2 DC, I am getting the InstalledOn output. However, when executed from the jump box with powershell v4.0 (Server 2008 R2) to query
the same 2008 SP2 DC, it just gives the prompt again without any error or output. This behavior is consistent for other 2008 SP2 DC's in the environment.
Get-HotFix -cn $computer | Select-Object HotfixID,Description,InstalledBy,InstalledOn | where {$_.InstalledOn -ge (Get-Date -Day 1 -Format d)} | FT -AutoSize

Hi jrv, I have already tried the Win32_QuickFixEngineering option, which doesn't work either. Apologies for not mentioning the workarounds that I have already tried.
Get-Hotfix seems to be just a wrapper for Win32_QuickFixEngineering as per the below article. (http://technet.microsoft.com/en-us/library/hh849836.aspx)
I have seen a mention of using the WU ActiveX control on few forums, but was too lazy to read it through.
After rigorous testing, it makes me realize that somewhere the Get-Hotfix dates formatting\comparison isn't working.

Installing Officejet Pro 8610 on Windows Server 2008 R2

Similar Messages

Maybe you are looking for