Installing older Mac drive in Mac Pro

I'm desiring to mount a Seagate Barracuda ATA IV drive once housed externally. Can I do this or must I continue to access it via Firewire?

Please don't post in the same question twice, and mark this as "solved".

Similar Messages

Need to install external dvd drive on mac book pro

My internal DVD drive has quit, so I purchased an apple external DVD drive. How do I get me mac book pro to recognize and install it?

Hi chrisweide,
Mac computers that shipped with a built-in SuperDrive may not be compatible with the external Apple SuperDrive:
Mac computers: Apple USB SuperDrive and MacBook Air SuperDrive compatibility
Regards,
- Brenden

Just installed new hard drive in mac book pro 15", when trying to boot OSX from original disk I still get a folder with a question mark in it. How can I reinstall the OS?

Can't seem to get my mac book to boot from the CD after installing new hard drive.
I keep holding down "c" while restarting the machine with the disk in but it just keeps ejecting the disk and giving me a folder with a question mark.

If your on 10.5 with a Intel Mac, I think Apple has jinxed the firmware so you can't boot from the 10.5 disk anymore.
So far several people, myself included, can't boot from a 10.5 OS X disk on a Intel Mac.
Your going to have to buy a 10.6.3 Snow Leopard retail disk, it's wayyy better than 10.5 anyway, faster and most stable even better than Lion. Have to buy iLife though as it doesn't come on the 10.6.3 retail disks, only free with grey disks.
http://store.apple.com/us/product/MC573Z/A
https://discussions.apple.com/message/16276201#16276201

Question about Bootcamp XP install on seperate drive on Mac Pro

I installed a seperate drive for boot camp and while I was running 10.4 it appeared in the control panel and at start with option key. After upgrading to 10.5 it no longer appears under in the control panel, however I can still boot from it by using the option key. Does anyone know how (aside from reinstalling XP) that I can get it back in the control panel?

After you installed Leopard did you then boot up on the Windows side and insert the Leopard CD in the drive so that Windows can update the drivers and boot camp? If not then try that and see if boot camp appears in the control panel after that.
Axel F.

Adding non mac drives to Mac Pro

Please forgive me if this has been answered somewhere already. I've tried searching and I can't seem to find the answer. I am trying to help my nephew order a new Mac Pro on a budget. As I understand it, the Apple branded drives for Mac Pro come with some sort of holder which allows the drive to slide into the bay. Is this holder included in the case or is there any way to buy one for use with a third party drive?

There are trays for four drives, you don't need to purchase any (unless you want spares for more than four drives).
Any SATA drive will work.
I'm not even sure if there is such a thing as Apple-branded which usually would mean specialized firmware only. Physically all drives are just standard drives.
Do make sure though that your nephew is prepared to have a couple (2) of backup drives and maybe a data drive. Having an emergency boot drive plus a bootable backup of the system should never be ignored or skipped.
TransIntl sells extra trays for $29 or 2 for $49, though I don't think you'll need any. For now
300 and 500GB drives go for $68-168 looking at Maxtor Maxline III 300 to WD RE2 500. With MaxLine Pro 500 in-between or WD RE 320, both around $110-120.

Installing adobe flash drive onto Mac Air.

Im having trouble installing adobe flash drive onto my Mac Air, how can I do this?

1. System Preferences > Flash Player > Advanced > Delete All
     Press the "Delete All" button
     Install Adobe Flash Player.
    http://get.adobe.com/flashplayer/
   Download it first. Click Safari in the menubar and select “Quit Safari”.
    Follow the prompts and install it.
    Restart computer. Relaunch Safari.
2. Allow Plug-ins
    Safari > Preferences > Security
    Internet Plug-ins > "Allow plug-ins"
    Enable it.

CC2014 install on external drive? (mac)

Can [any/all] Creative Cloud apps be installed on an external drive (Mac)? If so, how could I do that? ie: NOT on the system drive.
thanks.

No. All Adobe apps must be installed on persistent drives.
Mylenium

How install the LAN driver for Satellite Pro A120

Actually, my problem is that i didnt know how to install the lan driver on my Satellite Pro A120 to connect throug the net.
The issue that theres no installation to do to complete the install.
And theres other issue that i need the Ethernet Controller
My laptop was vista OS installed, But i change it and put Windows XP instead
Plz help me

Thats very easy to install the LAN driver.
On the Toshiba website you can search for it:
http://eu.computers.toshiba-europe.com => Support & Downloads => Download drivers
Select the right notebook. In your case its the Satellite Pro => Satellite Pro A Series => Satellite Pro A120.
And then choose at operating system Windows XP and at Driver type LAN Driver.
Click on search and you will get the right driver.
Download and install it. How this works did Jimi said.

Installing three SSD drives on Mac Pro

Hello,
I followed the advice given here and bought 3 Samsung 840 SSD drives for my Mac Pro. Two of them are 120GB and one is 250GB.
I also purchased a Tempo SSD Pro 6GB/s SATA PCIe Drive. Only one of them (that holds two SSDs.)
I plan on using:
     • one SSD for the OS and APPS
     • one SSD for a PS scratch disc
     • one SSD for the photoshop, premiere pro, and after effects files I'm currently working on.
I figured I'd keep the 1TB HDD currently used in the computer to store all my other files.
I also have a 1TB seagate extrenal HDD that I would like to set up as a back up or time machine.
Does this sound good?
If so, which SSD do I install in my regular sliding drawer bay? I have 2.5" - 3.5" adapter.
Which two do I install on the PCIe card?
Which on do I use for what?
As you can see I'm clueless. Lol
Here are my specs before adding the SSDs.
Mac Pro
Mid 2012
Processor 3.33 GHz 6-Core Intel Xeon
Memory 48 GB 1333 MHz DDR3 ECC
Graphics ATI Radeon HD 5870 1024 MB
Software OS X 10.8.4 (12E55)
Storage 1TB Sata disc (423.26GB free),
               1TB External USB Disk freeAgent GoFlex Drive (988.58 free)
P.S. I'm unsure about being able to install my current O.S. on the new SSD. When I bought the Mac Pro it had an older version of OS on it with a free download of the new OS. So the disc will only have the older version. Will I have to pay for the newer one or can I somehow copy it from the current HDD drive it's installed on?
Thank you so much. You have already been a HUGE help in the past posts and look forward to your wisdom. 8 )
Matt

Clone the system to the SSD you plan to use for system.
How much disk space is your system using now? w/o incl. anything in /Users, so just system.
If your system uses 60GB you want to use the 240GB SSD.
I think 120GB is on small side for scratch alone.
move projects to scratch array when you want to work on them: "Work disk + scratch" is fast. Then move them off the array, erase the array, and start a new project.
I would try the 2 x 120 SSDs on PCIe 6G as scratch and see how it feels and works.Try and test. No harm. I think that is what most people do, they experiement and try out different setups to find the one that works best for them.
Important: Have a clone of the system and be ready to restore or move it around as needed.
Install TRIM Enabler of course.
SSD Maintenance
Samsung recommends setting aside 10% for over-provisioning.
Their Windows utility, shame there isn't a Mac version.
#2: Try system on 120GB in drive bay with an adapter
With that then use the other two on the Tempo.
Those could be one large 360GB volume JBOD.
You will have to see how much your scratch space gets used.
I would have argued for 3 x 240GB SSDs. More flexible. Better SSD design - slightly. Adds $140 to the price, even if you had to wait to get 3rd one;
#3 get 2 x 240GB for scratch and projects and 1 x 120GB for system (if your system is less than 50GB)
I doubt you will find the difference of the system on the Sonnet Tempo a deciding factor.
The Sonnet Tempo Pro is for higher I/O RAID, both Tempo cards support 2 x SSDs (I have the cheaper one)
http://www.amazon.com/Samsung-Series-120GB-internal-MZ-7TD120BW/dp/B009NHAF06/
PS: You have Mountain Lion. Buy Carbon Copy Cloner and it will clone the system and create the recovery volume also so you should not need to redownload 10.8.x - and you do not need the DVD with 10.6.4 again.

Install 2nd DVD Drive in Mac Pro 1,1 or 3,1

Would anyone have info on installing a 2nd optical drive in either the 1st-Generation or 3rd Generation Mac Pro? Seems ticky to open the optical compartment open. Thanks.

The instructions can be found here: http://manuals.info.apple.com/MANUALS/0/MA177/en_US/MacPro_OpticalDrive_DIY.pdf
Edit: Note, you need to remove the bezel off of the drive drawer before installing. And make sure you keep the latch on the back of the computer in the up position, it locks the drive carrier in place when in the down position. It can take some wiggling and effort to get the drive carrier out.

Installing new dvd drive in Mac Pro 3,1

I've had just about enough of this old optiarc dvd burner. I've tried to burn 3 verbatim SL dvd-R last night, and I got the message about couldn't calibrate laser power for this device. I have tried to burn at 2x, 4x, 6x, 8x with no success. I used to be able to burn discs sucessfully, but not anymore. I know this is an ATAPI drive aka P-ATA, and drives of this kind aren't exactly easy to find. I was told that there is a S-Ata port or two in my Mac pro, but that it's a real pain in the tush to get at and connect a cable to.. So, any help welcomed
OS 10.6.8, 6 gigs ram, Nvidia 8800 GT video card, if that helps
thanks
John B

couldn't calibrate laser power for this device.
That message is code for, "you are using the wrong discs for this drive". There appear to be several series that use different speeds, and they are NOT compatible. I expect you are using discs that are too "modern" for your older burner, such as 8x discs in a 2.5x burner.
That error message is unbelievably un-helpful and obscure.

Installing new hard drive in Mac Pro - question about compatibility.

I'm looking to install an extra internal hard drive in my 2009 Mac Pro, but I need to know if there are any compatibility issues with newer hard drives. I am looking at the Western Digital WD1002FAEX Caviar Black:
http://www.amazon.co.uk/gp/product/B0036Q7MV0/ref=s9_simh_gw_p147_d0_g147_i1?pf_ rd_m=A3P5ROKL5A1OLE&pf_rd_s=center-2&pf_rd_r=1HY9SF4S3JFEA79TK610&pf_rd_t=101&pf _rd_p=467128533&pf_rd_i=468294
Would anyone be able to tell me if this is likely to be compatible with my 2009 8 core Mac Pro? Or if there is anything I should be looking out for in particular? I know pre-installed hard drives are 3GB/s and the above hard drive is 6GB/s, does this matter?

Any SATA drive
About urls:
http://www.amazon.co.uk/gp/product/B0036Q7MV0/
is all that is needed.
For a bit more, WD1502FAEX WD Black 1.5TB
http://www.wdc.com/en/products/internal/enterprise/

Installed New Hard Drive in Mac Book

Please help.
I installed a new Hard Drive in my Mac Book as my old one is bad. I am trying to install Leopard. I have reached the screen to select a destination and there is nothing I can pick from in the window.
Can someone help with the next step, please.

Hi Sumo,
Have you already formatted your new hard drive using Disk Utility? Be sure to format as Mac OS Extended as you'll be fine. That may be why you're not able to pick a drive to install Leopard.
After formatting the drive then you should be able to progress to installing Leopard onto the drive. From there just follow the directions.
Good luck.

Installed new Hard drive, but Mac OS X won't install

Hi, I posted earlier about installing a new hard drive in my G3 iBook, and well, I did that! After the installation, I put in the Mac OS X CD and opened up the disk utility from the CD, and sure enough the new hard drive was there. So I clicked on the hard drive icon, then clicked erase, and selected Mac OS X extended (journaled). After this was complete, I attempted to install the Mac OS, but it told me that it could not install Mac OS X on this drive! please help me.

Alas, I too have expirienced the same problem, and I have all your answers. Yes, DO use www.ifixit.com, the instalation looks difficult, bot is quite easy. Check eBay for some HDs, I got a brand new 40 gig one for $70. I had a problem installing the OS with the new one, so if it happens to you try this:
1. Make sure you have the system restore disks.
( your restore disk (there are 4 of them,) shoud restore to mac OS 9 and you probably have a seprate X disk(s))
2. Insert the OS X disk and boot up (manualy insert disk(paper clip))
3. At the top there should be some buttons like the apple logo, file, etc.
under one of the menues there is a button either labled Services or disk utility
4. Select the erase disk tab.
5. erase your (empty!) HD.
6. shut down
7. manualy insert restore disk 1
8. Boot up holding down the C key, and run system restore
9. when that is done, boot up as OS 9
10. Insert the Mac OS X disk
10. restart whyle holding down the C key
11. install X.
hope it works!

Install new hard drive into MacBook Pro?

I have a MacBook Pro from early 2008 and I've just run out of space on the 200GB hard drive which came with the computer.
I've read in a few forums that a 1TB hard drive WILL fit in this computer, and in some other forums I've heard that it won't, because it's too big. A terabyte would be ideal as I'm a media student and use this computer for literally everything.
However, if the Terabyte won't work, I'd be happy to live with the 750GB version of it. I'm looking at the Western Digital Scorpio Blue ones at the moment.
Now, my question is this; Will my computer be able to handle the new hard drive? Or should I just buy a 1TB external, run everything off that, and just upgrade the RAM?
I'd also look at getting a cooler mat for my computer if that would help.
Any help would be greatly appreciated.

Refer your guy to this:
http://eshop.macsales.com/item/Western%20Digital/WD10TPVT/
"Description: 1.0TB WD Scorpio Blue 5200RPM SATA 12.5mm HD with Advanced Format Technology - Fits all Apple MacBook/MacBook Pro 'Unibody' Models (13/15/17"), *MacBook Pro 'pre-unibody' 17",* and PC Laptops which support 12.5mm SATA Drives. New with 3yr WD Warranty. (WDGWD10TPVT)"
OWC is one of the most reliable online vendors of Mac-related stuff. You can believe that description.
The confusion arises from the fact that Apple says the height limit for drives in all MBPs is 9.5mm. Obviously Apple doesn't support the use of thicker drives in them, but in fact they do fit and work in some models, as the quote above describes.

Installing older Mac drive in Mac Pro

Similar Messages

Maybe you are looking for