Installing on new drive and copying files to it
I have a Macpro with a 500GB drive running 10.5.4 that contains the OS, applications and my media. I would like to put either a 1TB or 2TB drive into it and put Snow Leopard on it and transfer all of my data and files (almost 450GB) to the new drive.
1.) How do I install the new OS on the new drive after I swap it out with the old one?
2.) What is the best way to copy all of my media and files to the new drive after the OS is installed?
Thanks.
Message was edited by: rick.pearl
Put the new drive in and keep the old one as well.
Boot from the SL DVD and install it on the new drive.
Once you boot in SL for the first time, use the Migration Assistant to transfer your stuff. Point it to the old drive.
You could also clone your old drive on the new drive using Supper Dupper and then upgrade to SL. If it was me that's what I would do, because I don't like Migration Assistant. But it's your choice..
Similar Messages
-
My Hard Drive died and when the Apple store installed the new drive they upgraded me to Mavericks. I no longer had iPhoto. Where do I get iPhoto, do I need it and where are my pictures going when they import??? Help I'm SO confused and frustrated. Thank you.
You need two items
1 - the iPhoto application -
You install it from the App Store
2 - and the iPhoto library - restore form your backup from just before the disk died - no importing involved - simply restore and launch iPhoto and it will look in the pictures folder and open it and it will be exactly the way it was when you made the backup
As to your question Do you need it - No you can manage your photos anyway you please - iPhoto is a good way but not required - you can use any software you want and you can import photos using image Capture (in your applications folder) or any other software you choose - If you use iPhoto then they by default going your iPhoto library - if you use other software then they go where you say to put them
LN -
How to use an external hard drive and copy files to the disk for mac and windows??
please tell me how to copy files to external hard disk and use it for both mac and windows. there is the fat32 formatting bt i dont wanna use formatting because i already have a lot of content on the exteral hard disk. thank you.
It is simplest to have the HDD formatted to noe common to both Mac an PC. ExFAT is one. But to do that will erase all data on the HDD.
If the HDD id formatted NTFS, Mac can read but not write to it. The solution then is to use a third party application such as Paragon or Tuxera which will overcome that obstacle. These applications do have mixed reviews.
Ciao. -
ipod nano won't synch, i haven't purchased anything in a long time and haven't synched with the computer just charged on car charger. when i plugged the nano in it tried to install a driver and that failed and now the computer and itunes won't even recognize that the nano is plugged in.
REPOST (this solved my problem!!)
originally posted by shootme78
"The device manager just needed to be prompted to use the driver for an Apple Mobile Device instead. The Apple driver was already in my PC - I just had to prompt the device manager to use it instead of the camera driver it kept installing. Here's what I did:
I right-clicked the iPhone in Device Manager and chose Update Driver (for me, the iPhone was showing up in the Device Manager under Imaging Devices).
I selected "Install from a list or specific location (Advanced)" and clicked Next.
I chose "Don't search. I will choose the driver to install" and clicked Next.
In the next window there were 2 drivers to choose from: the "Digital Still Camera" driver that my PC kept thinking the iPhone was, and Apple Mobile Device USB Driver. I selected the Apple Mobile Device driver.
The driver installed, and at that point iTunes 9.2 could finally detect the iPhone. Yay!"
if you still confused, this is the real post by shootme78
https://discussions.apple.com/message/11761418#11761418?messageID=11761418
this solution worked with every itunes version
* i tried this on itunes 10.6.3.25
Hope this will also solve your problem -
Since it is in the download, I am unable to permanently delete these (over 100) cookies and they continue to reoccur each time I open the browser. Sometimes the cookies will not delete when I try to remove only "one" cookie and I must remove "all". I have used Firefox as my browser for years but this has never happened.
You can't remove opt-out cookies that are added by an extension as long as that extension is enabled or installed. If you choose to install such an extension then you have to accept the presence of 100 or more cookies added by the extension.
-
I noticed there are new drivers (/06) out there for the SB Audigy cards. My question is, do I need to uninstall the existing drivers first? Or, do I just install new downloaded drivers over top?
I know with video card drivers that you need to uninstall the old ones first...
Thanks for any input!Creative is, uh, different.
You better just uninstall Audio Console, reboot, and run the new driver update (which also installs Audio Console.)
That's what I did. Works perfect. They uninstall the old driver, ask you to reboot (say yes), then install the new driver and Audio Console. Then they ask you to reboot (say yes), and this is done before Windows Startup programs run so your virus scanner and stuff shouldn't interfere. Just make sure you shut that down before initially running the download setup so the first part goes right.
Uninstalling Creative stuff has often caused unpleasant effects when trying to install it again. Like "No SoundBlaster audio hardware installed, please install such and run setup again," and the like. Sometimes only "format c:" fixes this!
Make sure you also download and install the DVD Audio update after installing the new driver. -
Geforce GTX 285, OS10.6.4, new driver, and performance
An experience: I was one of the unhappy users of a Geforce GTX 285, a GPU that just didn't want to perform according to specs. As an X-Plane pilot this fact gave me headaches and a low fps level. Now, shortly after installing the OS update to 10.6.4 I discovered a very recent new driver (19.5.8f03) for the card (http://www.nvidia.com/object/geforce-macosx-19.5.8f03-driver.html)
I installed it and also re-installed the latest CUDA version 3.0.14 (http://www.nvidia.com/object/MacOSX-CUDA-3.0.html). Since this update the GTX's performance is excellent on the Mac OS side of my PM.
I am no expert, but for power saving reasons the card seems to have three levels of clock speed that X-Plane was rarely able to trigger to the highest level. Perhaps the new driver lowers the load thresholds that trigger the card into higher performance?
Did anybody have a similar experience? Does anybody of you cognoscenti have an idea of what the driver changes may have been?I've installed this new driver and it has not made the slightest difference to the performance of the MacPro running 10.6.4 with an EVGA 285 for Mac.
Half-Life2 frame rates are exactly the same post driver update as they were prior (much lower fps than when running 10.6.3).
What I have noticed is the fan noise ramps to an alarmingly high speed when entering various in-game environments. The fan was running so loud I quit the game in fear that some damage might be done to the card.
http://www.evga.com/forums/tm.aspx?m=428085 -
I had a repair done at the apple store where the replaced my hard drive and copied my other hard drive over to the new one. Everything is fine except the time machine wont reconnect to my old file and is trying create a new file but not there is not enough space for both files files? Do I need to do something to have it continue to update my old file instead of recreating a new one?
Depending on what version of OSX you're running, and how the data was transferred, you may be out of luck.
If you're running Lion, and your backups were made to a directly-connected external HD (ie, not a Time Capsule or other network location), you may be able to get Time Machine to "associate" the new disk with the old backups. See #B6 in Time Machine - Troubleshooting, especially the pink box there.
If you're running Snow Leopard, you might be able to do a full system restore of your backups to the new HD. See Time Machine - Frequently Asked Question #14 for detailed instructions. That should leave a "trail" that Time Machine can follow to "associate" the new drive with the old backups. Unfortunately, that doesn't always work, and there's no way to do it manually, as there is with Lion. -
Recently, my mid-2009 MacBook Pro has been crashing when I close the screen ("it's having a problem recognizing when the screen is closed/open and deciding what to do, error overload etc."). It wasn't an SMC issue so I took it to an Apple Store, ran some tests, and decided my hard-drive is failing.
Not wanting to spend an insane amount of money on some "official apple hard-drive," I want to install a new 256GB SSD instead. Hoping to squeeze as much life out of this computer as possible (in January I upgraded from 4 GB RAM to 8 GB), I would like to try and start from scratch, i.e. back-up important folders, music, photos etc. and only take that to the new hard-drive. If someone could explain all the steps I need to take to safely complete this task (or point me in the direction of a guide) I'd appreciate it.
Potentially Important info:
Model: mid-2009 13'' MacBook Pro
Processor: 2.53 GHz Intel Core 2 Duo
Memory: 4 GB 1067 MHz DDR3
Software: OS X 10.8.4
Some additional questions I have...
Should I be concerned with making a fully bootable back-up (not sure what that is called) as well? If so, what program should I use to create it?
How much more life should I try and push out of this computer? I'm an engineering student and really only use it for web-surfing, music, and
word-processing. The batter was replaced in March, the RAM was upgraded to 8 GB in January. When the battery was swapped, the trackpad went nuts so that's new too. Only other issues are a slightly loose audio jack and the left side of the screen being slightly wobbly (hinge is worn I'm told).cwgonzalez1192
Should I be concerned with making a fully bootable back-up (not sure what that is called) as well? If so, what program should I use to create it?
How much more life should I try and push out of this computer? I'm an engineering student and really only use it for web-surfing, music, and
word-processing.
Well there is no "official Apple HD / SSD" in any regard, no worries there.
If as you say youre only using same for surfing and word processing, why the need for a SSD? You would not notice any speed diff. in use on either of those,....in boot times yes, but in word or surfing, not.
You can push it likely a few more years, for mere surfing and word processing,...many many years. Up TO the point that any major fixes become unrealistic relative to getting a new(ER) machine.
Concerned with a boot clone? yes and no. Its an ideal immediate recovery, since you cannot boot from Time Machine, ....in case of HD crash, recovery takes seconds from boot, or 20 mins or so from removing old and installing a clone. All the prosumers and pros have at least one updated clone of their prime machines.
You can do a "fresh install" if you choose, however if your current drive is FINE, why not merely clone it and save yourself some headache?...., but that is your prerogative of course. Ideally 2 drives, one to backup your data (you need that regardless of installing a new drive for sake of a backup/archive,...ideally 2 actually, not merely one).
You could clone internal to NEW SSD/HD , ...then offload unnecessary files to an external to free up space and clutter and run off the clone, and this would only take a couple hours......the clone itself takes approx. 40+ mins.
CLONE Apps :
Superduper does not clone the recovery partition, but that is NOT necessary if you keep the original HD as a “backup clone”. Most don’t bother with the recovery partition in a clone, however that is your prerogative.
http://www.shirt-pocket.com/SuperDuper/SuperDuperDescription.html
(Free superduper APP above)
CCC App
http://www.bombich.com/ -
Mac OSX 10.6.8 running Photoshop CS5. My hard drive went belly up. Installed a new one and then tried to install Photoshop from my backup. I get an error message 6 telling me to uninstall Photoshop and then reinstall from the original software. But I bought from Adobe online. How do I go about this?
Yes, the Old Master file has a folder for each year where I find all photos from that specific year. I am attaching a screen shot of the file.
In the meantime i have managed to download all photos (it did not download any video files though in mpg, avi, 3gp, m4v,mp4 and mov format) to a new iphoto library. Unfortunately the photos are quite mixed and often doubled up. I ma considering to purchase iphoto library which checks all duplicates in iphoto. this will save me a lot of time. What do you think? -
New hard drive and recovery files
i have a hp pavilion dv6 notebook
i replaced my hard drive beacuse it is broken
but i made a copy of the recovery files in a flash drive
i made a new partition and copied the recovery files in it to make a factory restore but i can'tWhen requesting assistance, please provide the complete model name and product number of the HP computer in question. HP/Compaq makes thousands of models of computers. Without this information it may be difficult or impossible to assist you in resolving your issue.
The above requested information can be found on the bottom of your computer or inside the battery compartment. Please do not include your serial number. Please enter the model/product information into HP's Online Consumer Support page and post it here for our review.
Copying the "recovery files" to a flash drive and then a new hard drive partition isn't the proper way of using the HP Recovery files. You needed to create your personal HP Recovery Discs or USB Flash media using the HP Recovery Manager when you first setup your computer. If you didn't create your personal HP Recovery Media, you will need to contact HP in your region / country via the HP Worldwide Support Portal to check on the availability of HP Recovery Discs for your computer.
If you have any further questions, please don't hesitate to ask.
Please click the white KUDOS star to show your appreciation
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240 -
Can I use my old internal hard drive and copy everything into the new one?
My internal hard drive is running out of space, and I want to buy a new one. But to do that, I'll have to buy a external hard drive to back up everything and then copy it back onto the new internal hard drive , right? I don't have that much budget. So can I use the old internal hard drive that I took out of my Macbook and copy everthing back into the new internal hard drive after the repalecment? so I don't need to buy a external hard drive to back up everything
Tks!You will have to buy a new HDD and an enclosure to make the transfer. You can use Disk Utility to make the transfer.
INSTALLING A NEW HDD IN A MBP
1. Make certain that you have backed up all of your important data.
2. You will need a HDD enclosure. One with a USB connection will do. A 9 pin Firewire is better.
3. Install your new drive in the enclosure and connect it to your MBP.
4. Open DISK UTILITY>ERASE. From the left hand column drag the new drive into the 'Name' field. Make sure that the format is 'Mac OS Extended (Journaled)'. Click on the 'Erase' button.
5. Click on the 'Restore' button (on top). Drag the old drive into the 'Source' field and the new drive into the 'Destination' field. Click on the 'Restore' button on the bottom right hand corner.
Depending upon the amount of data you are transferring, this may take a couple hours or more. A Firewire will speed up the transfer. This will result in both drives having identical information on them. INSTALLING
6. After the data transfer has completed, you may swap the drives. Start the MBP and you have finished the installation. The initial boot may take a bit longer than you are accustomed to, but that is normal.
7. When you are satisfied that the new hard drive if functioning properly, you can erase the old drive and use it for any needs that you may have. -
I had iLife pre-installed on my aluminium Macbook 2009 with OSX Leopard on it. My hard drive broke but got most of the info off it and just installed snow Leopard on to a new drive and then downloaded and installed Mountain Lion over it. Now I don't have iLife anymore. How do I get it back?
Welcome to Apple Support Communities
Mac OS X doesn't come with iLife applications, so you have to install them manually after installing Mac OS X.
Insert the Applications disc or Mac OS X Install Disc 2 DVD and install iLfe applications. Then, open > Software Update, and install the latest update. If you want, you can purchase iMovie, GarageBand and iPhoto in the App Store, so you will get the most recent version -
On a macbook I purchased secondhand hard drive got corrupted and I started to get the flashing folder with the question mark, I purchased a new hard drive and snow lion install DVD I installed the hard drive and tried disc but kept getting blinking folder
Welcome to Apple Support Communities. We're users here and do not speak for "Apple Inc."
Power on the computer and insert the DVD immediately.
Hold down the 'C' key to boot from the Snow Leopard DVD.
http://support.apple.com/kb/ht1533
After selecting the appropriate language, if necessary, select Utilities, and Disk Utility.
You'll likely need to partition and format the new drive before it's recognized.
http://manuals.info.apple.com/MANUALS/0/MA161/en_US/MacBook_13inch_HardDrive_DIY .pdf
(Yes, these instructions ARE 7 years old, but the procedure is the same for installing from DVD media.) -
Hi i have a white screen problem with my macbookpro mid2009 15".I installed a ifixit battery and i think it screwed up one owc ssd drive.I just installed a new one and at 13min battery left it shut down and then all i got was a white screen...I tried every feasible command and all i got was some more white lol.I dont have my tools to open the case right now but do you guys think my cpu board is done?
Have a look at this help document for suggestions that you haven't tried yet:
http://support.apple.com/kb/TS2570
Maybe you are looking for
-
my new project is to create a flash site for an resturant. the have an html site, that they don't want to chage. I am aloud to create a new home page that allows the user to choose between the two, or create a new html . I have complete control over
-
Configuring Database Security Store is failing
Guys, I am trying to configure Database Security Store while installing 11gR2 (OIM, OAM, SOA) and wlst.sh script is failing. Here is the format I am giving. $MW_HOME/oracle_common/common/bin/wlst.sh $ORACLE_HOME/common/tools/configureSecurityStore.py
-
My ipod no longer synchs with itunes
My ipod no longer syncs with iTunes and my computer. It shows up under devices, but not in itunes. I installed an update from Apple yesterday. Could this be causing the problem (their updates have caused issues before), or is there something I need
-
Hi, I want to freeze the Row Header as well as some data columns in WAD. Eg FY HY1 Jan Feb ..... HY2 July... Sales Org DistrCh Site 1200 600 100
-
hi - quick q - i created a project in cs5 using the new video settings - how do i hide the title/action safe guides?