Installing Oracle 10g client 10.2.0.4x64 on Windows 2008R2 serverx64

I am unable to install 10gR2 64bit on 2008R2 server. it doesnot launch the OUI after bypassing the system check. any help would be appreciated.

Pl follow the directions in MOS Doc 1173433.1 (How to Install Oracle 10.2.0.5 on MS Windows 7 / Windows 2008R2). 10.2.0.4 is not supported, you will need to apply the 10.2.0.5 patch.
HTH
Srini

Similar Messages

I can't install Oracle 10g Client in x86-64(Intel EM64T)

Dear All,
Recently, I tried to install the Oracle 10g client in Redhat Enterprise Linux 4.0 with x86-64 (Intel EM64T) platform. As I know,that is either Oracle 9i or Oracle 10g has been certified to Redhat AS 3.0 operating system.
How can I install Oracle 10g normally under all x86-64 platforms? Or, When does Oracle to release out the patch for all x86-64 versions?

Please reffer to Installation section.
Database Installation

Installing oracle 10g client

maybe this question seem silly.
but I am using ODP to access oracle 10.1.0.2 and i want to know how to access database from client to the database server throw ODP.
And asking is there version called oracle 10g client should i install before install ODP or ODP that i download it is enough? and if it is enough how i can configure it to access server?

That's from ODP.NET FAQ:
Oracle9i Client Release 2 (9.2) or higher (included with ODP.NET installation)
Althought the statement is for 9i, it remains true for 10g, ODP.NET has the necessary Oracle client components included.
Werner

I need to download Oracle 10g Client (10.2.0.4) for Window 2003 64bit

I need to down load Oracle Database 10g Client Release 2 (10.2.0.4) for Windows 2003 64bit server I found the 10.2.0.1 but can't find the 10.2.0.4 download.

Hi,
Here is the link.
Oracle Database 10g Release 2 (10.2.0.4) for Microsoft Windows Vista x64 and Microsoft Windows Server 2008 x64
http://www.oracle.com/technology/software/products/database/oracle10g/htdocs/10204_winx64_vista_win2k8.html
For 32-bit OS, you can get the software from:
Oracle Database 10g Release 2 (10.2.0.3/10.2.0.4) for Microsoft Windows Vista and Windows 2008
http://www.oracle.com/technology/software/products/database/oracle10g/htdocs/10203vista.html
All the database software can be downloaded from:
Oracle Database Software Downloads
http://www.oracle.com/technology/software/products/database/index.html
Regards,
Hussein

""i Can't Install oracle 10g client in windows Vista"

hello,mr or mrs
i need help for install oracle10g client in windows vista???? cause there error when i install
"abnormal program termination.an internal error has occured.please provide the following files to oracle support : "unknown"
"unknown"
"unknown"
please help me .......???

hello
Operating System
vista home is not support
Oracle Database for 32-bit Windows is supported on the following operating systems:
Windows 2000 with service pack 1 or later. All editions, including Terminal Services and Microsoft Windows 2000 MultiLanguage Edition (MLE), are supported.
Windows Server 2003 - all editions
Windows XP Professional
Windows NT is not supported.
Oracle Database for Windows x64 is supported on the following operating systems:
Windows Server 2003, Standard x64 Edition
Windows Server 2003, Enterprise x64 Edition
Windows Server 2003, Datacenter x64 Edition
Windows XP Professional x64 Edition
Windows Vista x64, Service Pack 1 - Business, Enterprise, and Ultimate editions
Windows Server 2008 x64 - Standard, Enterprise, Datacenter, Web, Standard without Hyper-V, Enterprise without Hyper-V, and Datacenter without Hyper-V editions
The specific operating system components that are not supported are Windows Server 2008 x64 Hyper-V and Server Core

Problem when install oracle 10g client on whitebox enterprise Linux 3

I download oracle-client-10103.tar.bz2 and unzip.
After set environment variable follow instruction
I run runmefirst.sh, system cannot recognize the .o file.

It is possible that you did not download the correct client.
The file name for the 10.1.0.3 client for Linux x86 is ship.client.lnx32.cpio.gz. The Linux x86_64 client name is ship.client.lnxx86-64.cpio.gz .

Install Oracle 10g with Toad 9.1

Hi All,
I am a novice in database(SQL,PLSQL) programming and hence want to learn and practise very deeply in detail for which i want to install Oracle 10g client with Toad 9.1.So need your advise on the process.
(a)Do i need to download entire Oracle Enterprise Edition Installation for Vista? I have read in one of the forums that downloading only the Oracle Client is enough?
Can you please advise me?
(b)I already have the TOAD 9.1 setup with me which i can install.But,i do not know that how will i use TOAD interface and connect to the oracle database.
(c)Also,any sample script/database with some tables that i can use for learning complex SQL query writing would be very helpful.In brief-any project that i can work on in building all the requirements by writing SQL which simulates real time scenarios of SQL development.
Please help me ,i am struggling.
Thanks
Dev

Hi all,
Thanks a lot for all your inputs.Its very useful and presently I am following the steps suggested.
I had another doubt with respect to this.While attending a oracle course,the instructor had told about an installation option of installing oracle 10g on Linux using VMware/virtual -i am sorry i am not sure about it.
So,can you please give your inputs about this process as I dont know about how to setup?
(a)What are the tools that i will need to build a virtual machine in my present computer with Linux as the OS?
And,what are the steps we need to do ?
(b)How do i use a vitual machine if i install it? I mean how will it work?
(c)Then,at last how do i install Oracle with Linux on that?
Please help me with some more inputs
--Dev

Oracle 10g Client not working in Windows 7 64 bit

Dear All,
Not ablle to install Oracle 10g Client (Rel 2) in Windows 7 64 bit , getting an abnormal error and stoping ..
Please suggest me how to proceed futher

823755 wrote:
Dear All,
Not ablle to install Oracle 10g Client (Rel 2) in Windows 7 64 bit , getting an abnormal error and stoping ..
Please suggest me how to proceed futherWhich Edition of Windows 7?
Where version of Oracle to four decimal places; i.e. V10.2.0.1

Oracle 10g Client Installation

Hi Guys...
I am installing Oracle 10g client on Redhat 5 O/S.
At about 40% during installation the OUI throws below errors:
This are few lines that I tailed from the log file.
INFO: 2/18/10 4:38:24 PM SAST: Starting install Install Phase 1 of component Oracle Call Interface (OCI)
INFO: Calling Action unixActions10.2.0.1.0 createLink
source = libocci.so.10.1
destination = /oracle/sid/102_64/lib/libocci.so
overwriteExistingLink = null
INFO: Exception thrown from action: createLink
Exception Name: FileNotFoundException
Exception String: File not found: %fileName%
Exception Severity: 2
How can I over come this error?
Thanks...

RPM libocci.so.10.1 installed on yours machine?
Please install all these RPM's on your machine -
     binutils-2.17.50.0.6
     compat-libstdc++-33-3.2.3
     compat-libstdc++-296(i386)
     elfutils-libelf-0.125
     elfutils-libelf-devel-0.125
     gcc-4.1.2
     gcc-c++-4.1.2
     glibc-2.5-24
     glibc-common-2.5
     glibc-devel-2.5
     glibc-headers-2.5
     libaio-0.3.106
     libaio-devel-0.3.106
     libgcc-4.1.2
     libstdc++-4.1.2
     libstdc++-devel 4.1.2
     libXp-1.0.0-8.i386.rpm
     make-3.81
     openmotif
     sysstat-7.0.2
     unixODBC-2.2.11
     unixODBC-devel-2.2.11

Oracle 10G client Install on Windows

We recently had our Oracle client upgraded from Oracle 9i to Oracle 10G. Now when we sign into the Oracle Enterprise Manager Console, select a user schema and right click on a table to View/Edit Contents, the records display but when i select a record and try to right click to Add Row / Delete all i get is a solid gray bar, so i can't delete the record. I am thinking this may be a permission problem of how the client was installed, but have no idea where to start. Any help from anyone will be greatly appreciated.

Use this step-by-step guide.
http://faq.programmerworld.net/database/installing-oracle-10g.html
http://www.procurar.pt http://www.wallpapers.pt

Install Oracle 9i client on a computer with Oracle 10g Client

Hello all!!
I'm using a computer with Oracle 10g client, and I access two databases. One server has Oracle 10g server, and the other server has Oracle 9i server.
I want to install 9i client, to have it also in my computer. I haver read that I just have to install it in a different ORACLE_HOME, but I have a doubt.
If I install 9i client, would I be able to use the utilities, (exp, expddp, sqlldr) of both versions, or which version will be used in the command line for the utilities.
Thanks a lot!!!

To start with, Home Selector is a "9i thing" (and older), in 10g there's the OUI -> Installed Products... -> Environment tab instead.
About the 9i dbca with other Oracle products installed. If you use launch.exe to start via dbca start menu shortcut, it uses ora92\assistants\dbca as working directory ("start from"). So when not looking for "numbered dlls" like oracore9.dll, a later/different version will be loaded if earlier in path, since loading goes through jre directories, ora92\assistants\dbca, then the dir's from path variable. From there it may start to link in libraries from different homes (on my laptop, "launch.exe dbca" uses files from 2 additional home paths!)
But, if you instead use dbca.bat started from ora92\bin, it will look in the right directories first and there's no dll mess-up. (But only when using the correct cwd!)
Plain and simple: stay very far away from multiple-general-home installs. It is possible to install allright, in different homes and all very nicely, but there will be pain when you decide to use the stuff (perhaps with sql*plus as the only exception, but I've run into bugs with that too).
Message was edited by:
orafad

Installing oracle 10g and 11g client on the same Linux RHEL 5.4 host

Is it possible to install Oracle 10g and 11g client on the same Linux RHEL 5.4 host and have the application switch between 10g and 11g? and how would the 10g and 11g be installed?

Thanks for your reply.
Typeically if 10g is installed in /home/roacle/product/10.2.0, are you saying that for 11g, it would be /home/oracle/product/11.0.0 ?
How about switching the application? Does changing the ORACLE_HOME and PATH environment variable setting enough ? Let's say from
ORACLE_HOME=/home/oracle/product/10.2.0/client_1 to /home/oracle/product/11.0.0/client_1

Problem Installing Oracle 8i and Oracle 10g client on same machine

Hi Gurus,,
I am new on DBAside....
I have already installed Oracle 10g R2.m planning to install oracle 8i on same machine..
What steps should i follow in order to avoid conflict..
The OS is Windows XP SP3....
I know that installing oracle 8i first and than installing oracle 10g is more convinient..But my requirements are different..
so have to install oracle 10g first and then Oracle 8i on same machine..
Thanks in anticipation.

Hold on - it DOES matter - you shouldn't update new repository with old oracle installer, so be careful...
Paul

Getting Error while installing oracle 10g 1.0.2.0 on Redhat - linux 64bit

I am installing oracle 10g on Redhat 64bit (VM ware). In the middle it gives some error oracle Net services cancelled. Please see the error message below and advise.
Configuration assistant "Oracle Net Configuration Assistant" was canceled.
The "/u01/app/oracle/product/10.2.0/db_1/cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled.
This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.
Output generated from configuration assistant "Oracle Net Configuration Assistant":
Command = /u01/app/oracle/product/10.2.0/db_1/jdk/jre//bin/java -Duser.dir=/u01/app/oracle/product/10.2.0/db_1/network/jlib -classpath /u01/app/oracle/product/10.2.0/db_1/jdk/jre//lib/i18n.jar:/u01/app/oracle/product/10.2.0/db_1/jdk/jre//lib/rt.jar:/
u01/app/oracle/product/10.2.0/db_1/jlib/ewt3.jar:/u01/app/oracle/product/10.2.0/db_1/jlib/ewtcompat-3_3_15.jar:/u01/app/oracle/product/10.2.0/db_1/jlib/netcfg.jar:/u01/app/oracle/product/10.2.0/db_1/network/jlib/netcam.jar:/
u01/app/oracle/product/10.2.0/db_1/network/jlib/netca.jar:/u01/app/oracle/product/10.2.0/db_1/jlib/help4.jar:/
u01/app/oracle/product/10.2.0/db_1/jlib/jewt4.jar:/u01/app/oracle/product/10.2.0/db_1/jlib/oracle_ice.jar:/
u01/app/oracle/product/10.2.0/db_1/jlib/share.jar:/u01/app/oracle/product/10.2.0/db_1/jlib/swingall-1_1_1.jar:/u01/app/oracle/product/10.2.0/db_1/jlib/srvmhas.jar:/u01/app/oracle/product/10.2.0/db_1/jlib/srvm.jar:/
u01/app/oracle/product/10.2.0/db_1/network/tools:/u01/app/oracle/product/10.2.0/db_1/jlib/ldapjclnt9.jar:/u01/app/oracle/product/10.2.0/db_1/jlib/ldapjclnt10.jar:/
u01/app/oracle/product/10.2.0/db_1/oui/jlib/OraInstaller.jar:/u01/app/oracle/product/10.2.0/db_1/lib/xmlparserv2.jar oracle.net.ca.NetCA /orahome /u01/app/oracle/product/10.2.0/db_1 /orahnam OraDb10g_home1 /instype typical /inscomp client,
oraclenet,javavm,server,ano /insprtcl tcp /cfg local /authadp NO_VALUE /nodeinfo NO_VALUE /responseFile /
u01/app/oracle/product/10.2.0/db_1/network/install/netca_typ.rsp
Configuration assistant "Oracle Net Configuration Assistant" was canceled.
The "/u01/app/oracle/product/10.2.0/db_1/cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled.
This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.

865231 wrote:
I am installing oracle 10g on Redhat 64bit (VM ware). In the middle it gives some error oracle Net services cancelled. Please see the error message below and advise.
Configuration assistant "Oracle Net Configuration Assistant" was canceled.
The "/u01/app/oracle/product/10.2.0/db_1/cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled.
This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.
Output generated from configuration assistant "Oracle Net Configuration Assistant":
Command = /u01/app/oracle/product/10.2.0/db_1/jdk/jre//bin/java -Duser.dir=/u01/app/oracle/product/10.2.0/db_1/network/jlib -classpath /u01/app/oracle/product/10.2.0/db_1/jdk/jre//lib/i18n.jar:/u01/app/oracle/product/10.2.0/db_1/jdk/jre//lib/rt.jar:/
u01/app/oracle/product/10.2.0/db_1/jlib/ewt3.jar:/u01/app/oracle/product/10.2.0/db_1/jlib/ewtcompat-3_3_15.jar:/u01/app/oracle/product/10.2.0/db_1/jlib/netcfg.jar:/u01/app/oracle/product/10.2.0/db_1/network/jlib/netcam.jar:/
u01/app/oracle/product/10.2.0/db_1/network/jlib/netca.jar:/u01/app/oracle/product/10.2.0/db_1/jlib/help4.jar:/
u01/app/oracle/product/10.2.0/db_1/jlib/jewt4.jar:/u01/app/oracle/product/10.2.0/db_1/jlib/oracle_ice.jar:/
u01/app/oracle/product/10.2.0/db_1/jlib/share.jar:/u01/app/oracle/product/10.2.0/db_1/jlib/swingall-1_1_1.jar:/u01/app/oracle/product/10.2.0/db_1/jlib/srvmhas.jar:/u01/app/oracle/product/10.2.0/db_1/jlib/srvm.jar:/
u01/app/oracle/product/10.2.0/db_1/network/tools:/u01/app/oracle/product/10.2.0/db_1/jlib/ldapjclnt9.jar:/u01/app/oracle/product/10.2.0/db_1/jlib/ldapjclnt10.jar:/
u01/app/oracle/product/10.2.0/db_1/oui/jlib/OraInstaller.jar:/u01/app/oracle/product/10.2.0/db_1/lib/xmlparserv2.jar oracle.net.ca.NetCA /orahome /u01/app/oracle/product/10.2.0/db_1 /orahnam OraDb10g_home1 /instype typical /inscomp client,
oraclenet,javavm,server,ano /insprtcl tcp /cfg local /authadp NO_VALUE /nodeinfo NO_VALUE /responseFile /
u01/app/oracle/product/10.2.0/db_1/network/install/netca_typ.rsp
Configuration assistant "Oracle Net Configuration Assistant" was canceled.
The "/u01/app/oracle/product/10.2.0/db_1/cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled.
This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.I thought the error message gave the advice already:
The "/u01/app/oracle/product/10.2.0/db_1/cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled.
This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.Looks like you canceled the pop up to configure your tns files. No harm, your database created just fine, but probably didn't configure listener.ora, sqlnet.ora, and tnsnames.ora. Just run netca and finish the tns confiiguration.

Error while installing oracle 10g on centos 5.6 32 Bit

Hi All,
Please help me with the issue I facing while installing oracle 10g on centos 5.6 32bit. I did lot of research on google but I am getting same answer...the libXp package is missing, but I have check it...its already installed.
[root@staging ~]# find / -name libXp.so.6
/usr/lib/libXp.so.6
/usr/lib64/libXp.so.6
echo $DISPLAY
<ipaddress>:0.0
[oracle@staging database]$ DISPLAY=<ipaddress>:0.0; export DISPLAY
[oracle@staging database]$ id
uid=500(oracle) gid=500(oinstall) groups=500(oinstall),501(dba) context=root:system_r:unconfined_t:SystemLow-SystemHigh
Below is the error message I am getting :
oracle@staging database]$ ./runInstaller
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be redhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1 or asianux-2
Passed
All installer requirements met.
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2012-06-27_05-37-17PM. Please wait ...[oracle@staging database]$ Exception in thread "main" java.lang.UnsatisfiedLinkError: /tmp/OraInstall2012-06-27_05-37-17PM/jre/1.4.2/lib/i386/libawt.so: libXtst.so.6: cannot open shared object file: No such file or directory
     at java.lang.ClassLoader$NativeLibrary.load(Native Method)
     at java.lang.ClassLoader.loadLibrary0(Unknown Source)
     at java.lang.ClassLoader.loadLibrary(Unknown Source)
     at java.lang.Runtime.loadLibrary0(Unknown Source)
     at java.lang.System.loadLibrary(Unknown Source)
     at sun.security.action.LoadLibraryAction.run(Unknown Source)
     at java.security.AccessController.doPrivileged(Native Method)
     at sun.awt.NativeLibLoader.loadLibraries(Unknown Source)
     at sun.awt.DebugHelper.<clinit>(Unknown Source)
     at java.awt.Component.<clinit>(Unknown Source)
I found some suggestion on google and tried to not use ip address in DISPLAY settings...
if I am using 0.0 instead of IP below eg.
[oracle@staging database]$ DISPLAY=:0.0; export DISPLAY
The error I am receiving differnt error
[oracle@staging database]$ ./runInstaller
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be redhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1 or asianux-2
Passed
All installer requirements met.
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2012-06-27_05-34-40PM. Please wait ...
DISPLAY not set. Please set the DISPLAY and try again.
Depending on the Unix Shell, you can use one of the following commands as examples to set the DISPLAY environment variable:
- For csh:                % setenv DISPLAY 192.168.1.128:0.0
- For sh, ksh and bash:      $ DISPLAY=192.168.1.128:0.0; export DISPLAY
Use the following command to see what shell is being used:
     echo $SHELL
Use the following command to view the current DISPLAY environment variable setting:
     echo $DISPLAY
- Make sure that client users are authorized to connect to the X Server.
To enable client users to access the X Server, open an xterm, dtterm or xconsole as the user that started the session and type the following command:
% xhost +
To test that the DISPLAY environment variable is set correctly, run a X11 based program that comes with the native operating system such as 'xclock':
     % <full path to xclock.. see below>
If you are not able to run xclock successfully, please refer to your PC-X Server or OS vendor for further assistance.
Typical path for xclock: /usr/X11R6/bin/xclock
[oracle@staging database]$ echo $SHELL
/bin/bash
Please help me.

satish.ygl wrote:
Hi,
I am getting the same error when i am applying patchset to 10201 to 10204. I am using RedHat Linux 4 version and I tried set $DISPLAY=<hostname/ip address>:0.0 and export=DISPLAY
#xhost + and checked $PATH this is also is correct
I did these steps still i am getting the following error
pen an xterm, dtterm or xconsole as the user that started the session and type the following command:
% xhost +
To test that the DISPLAY environment variable is set correctly, run a X11 based program that comes with the native operating system such as 'xclock':
% <full path to xclock... see below>
If you are not able to run xclock successfully, please refer to your PC-X Server or OS vendor for further assistance.
Typical path for 'xclock': '/usr/X11R6/bin/xclock'
Please help me in this scenario.
thank You,
Sri
Edited by: satish.ygl on Oct 30, 2012 7:49 PMyou must log onto the DB Server as below (or functional equivalent)
ssh -X oracle@DB_Server
& the first & only command after logging onto the DB Server should be as below
xclock
If/when xclock fails, then OUI will fail.

Installing Oracle 10g client 10.2.0.4x64 on Windows 2008R2 serverx64

Similar Messages

Maybe you are looking for