Installing Oracle 10g db on Linux4 on VMWare Workstation

Checking Network Configuration Settings................ Warning
Check complete: The overall result of this check is : Failed <<<<
Problem: The install has detected that the primary ip address of the system is DHCP-assaigned
REcommendation: ORacle supports installations on systems with DHCP-assigned public IP address. However the primary interface on the system should be configured with a static IP address in order for the Oracle Software to funtion properly.
I want to install O10g on Linux on VMware and I need to work on it.
Please suggest me how can I proceed further........
Thanks in advance..............Lakshman

LaskhmanK wrote:
Checking Network Configuration Settings................ Warning
Check complete: The overall result of this check is : Failed <<<<
Problem: The install has detected that the primary ip address of the system is DHCP-assaigned
REcommendation: ORacle supports installations on systems with DHCP-assigned public IP address. However the primary interface on the system should be configured with a static IP address in order for the Oracle Software to funtion properly.
I want to install O10g on Linux on VMware and I need to work on it.
Please suggest me how can I proceed further........The usual approach I would use is to read the message and take the recommended action.
In this case it says "However the primary interface on the system should be configured with a static IP address", so I would probably take that action.
As far as I know there is no Distro called 'Linux4'. Once you identify the distro properly, you might get an explanation of the basic steps to do network admin on the box. If that distro is some variant on Red Hat, you could use the CentOS docs at http://centos.org/docs/4/ , in particular Section IV.

Similar Messages

Regaring error when installing oracle 10g on redhat linux4 on vmware

hi can any body help me with this error
when i run the runInstaller
it run the prerequsits and
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be redhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1 or asianux-2
Passed
All installer requirements met.
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2010-12-24_01-06-17PM. Please wait ...[oracle10g@system3 oracle10g]$ Xlib: connection to ":0.0" refused by server
Xlib: No protocol specified
Exception in thread "main" java.lang.InternalError: Can't connect to X11 window server using ':0.0' as the value of the DISPLAY variable.
at sun.awt.X11GraphicsEnvironment.initDisplay(Native Method)
at sun.awt.X11GraphicsEnvironment.<clinit>(Unknown Source)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Unknown Source)
at java.awt.GraphicsEnvironment.getLocalGraphicsEnvironment(Unknown Source)
at java.awt.Window.init(Unknown Source)
at java.awt.Window.<init>(Unknown Source)
at java.awt.Frame.<init>(Unknown Source)
at oracle.ewt.popup.PopupFrame.<init>(Unknown Source)
at oracle.ewt.lwAWT.BufferedFrame.<init>(Unknown Source)
at oracle.sysman.oio.oioc.OiocOneClickInstaller.<init>(OiocOneClickInstaller.java:378)
at oracle.sysman.oio.oioc.OiocOneClickInstaller.main(OiocOneClickInstaller.java:2091)
thanks
Edited by: user9971259 on 24-Dec-2010 05:38

Welcome to the forums !
Pl post exact details of OS and database versions. This error indicates that all pre-requisites for your install have not been met - the Install guide for your specific version of database can be found at http://docs.oracle.com
Pl use the search feature to find many previous discussions on this topic - http://forums.oracle.com/forums/search.jspa?threadID=&q=xlib+AND+connection+AND+refused+AND+server&objID=f64&dateRange=thisyear&userID=&numResults=15
HTH
Srini

Oui-10207error while installing oracle 10g on linux in vmware

Hi,
I have installed vmware on windows 7(64 bit) on which i have installed Oracle Enterprise linux 5. I have set all the variables correctly. but when i try to install oracle 10g on linux, i get the error
OUI-10207:there is not enough disk space in the OUI swap area /tmp/OraInstall2011-10-17_03-44-48PM.Please make atleast 529KB of space avaivale and retry.
but i have around 95bg of space. My partitions are as follows
Device Boot Start End Blocks Id System
/dev/sda1 * 1 12551 100815876 83 linux
/dev/sda2 12552 13041 3935925 82 Linux swap/solaris
/dev/sda3 13042 13054 104422+ 83 linux
Please help me in solving the problem.
Thanks
Viraj

What is your swap size? try to increase size
execute below command on terminal, paste result here.
#swapon -s
#free
Tips : how to increase swap space
http://hackertrip.wordpress.com/2011/09/11/increase-swap-space/

Installing Oracle 10g rac on linux 4 using vmware :problem

Hi Expert ,
I'm facing problem on installing oracle 10g rac on centos 4x using vmware, installation is showing errors . The command failed are oifcfg, cluvfy
on running ./cluvfy stage -post crsinst -n rac1,rac2
error:
OCR integrity found invalid for rac1
OCR integrity found invalid for rac2
Please advice...
regards,
Shaan

hi Experts,
orccheck failed for one of the node, can you please suggest what needs to be done now..
filename :/dev/raw/raw1
error "device/file integrity check failed"
error "device not configured"
Regards
Message was edited by:
Shaan_dmp

Install Oracle 10g with Toad 9.1

Hi All,
I am a novice in database(SQL,PLSQL) programming and hence want to learn and practise very deeply in detail for which i want to install Oracle 10g client with Toad 9.1.So need your advise on the process.
(a)Do i need to download entire Oracle Enterprise Edition Installation for Vista? I have read in one of the forums that downloading only the Oracle Client is enough?
Can you please advise me?
(b)I already have the TOAD 9.1 setup with me which i can install.But,i do not know that how will i use TOAD interface and connect to the oracle database.
(c)Also,any sample script/database with some tables that i can use for learning complex SQL query writing would be very helpful.In brief-any project that i can work on in building all the requirements by writing SQL which simulates real time scenarios of SQL development.
Please help me ,i am struggling.
Thanks
Dev

Hi all,
Thanks a lot for all your inputs.Its very useful and presently I am following the steps suggested.
I had another doubt with respect to this.While attending a oracle course,the instructor had told about an installation option of installing oracle 10g on Linux using VMware/virtual -i am sorry i am not sure about it.
So,can you please give your inputs about this process as I dont know about how to setup?
(a)What are the tools that i will need to build a virtual machine in my present computer with Linux as the OS?
And,what are the steps we need to do ?
(b)How do i use a vitual machine if i install it? I mean how will it work?
(c)Then,at last how do i install Oracle with Linux on that?
Please help me with some more inputs
--Dev

Installing Oracle 10g on Windows Server 2008

Hi,
I want to install Oracle 10g on Windows Server 2008. As per Oracle, I should install 10.2.0.3 and then apply patchset 10.2.0.4.
For that, one has to sign in to metalink which is possible only for customers. I am
using Oracle only for educational purposes for now. Is there any other way of using Oracle 10g on Windows 2008?
Thanks,
Vladi

Of course if you don't have support and for educational purpose only , you should compromise a little by either install other OS or get virtual machine like VMware.
Or stay with 10.2.0.3, that should work in most cases.

Oracle 10g installation on Windows 2008 VMware

Hi everybody,
hope you can help me with that issue; I try to install a ECC 6.0 test-system with Oracle 10g on a Windows 2008 VMware instance.
I am getting a strange error when executing sapserver.cmd when I try to install the Oracle software; the Oracle Universal Installer 10.2 is aborting at the very beginning with an error popup with following content. First I enter the Drive letter for installation and SID and then OUI trys to start...
The program was not closed properly. An internal error occured. Please provide Oracle support with following datas:
"unknown"
"unknown"
"unknown"
Any ideas? I did not find anything in Metalink or on the SAP Marketplace. And I am aware that Oracle is not official supported on VMWare; on Windows 2003 I did not occur any similar problems.
kind regards
Philipp

The OUI doesn´t work (yet) on Windows 2008, you will need to wait for the OUI 10.2.0.4.
Markus

Install Oracle 10g R2 RAC on Linux 5.x (64 bit)

Hi Friends,
Please provide the document to Install Oracle 10g R2 RAC on Linux 5.x (64 bit)
Cluster : Local Disk
OCR and Voting Disk : OCFS2
DB Home : Local
DBF Files and FRA : ASM
Please let me know how to create OCFS2 and ASM Volumes for RAW Disks (SAN Lun's)
Regards,
DB

You can refer below
http://oracleinstance.blogspot.com/2010/03/oracle-10g-installation-in-linux-5.html
http://www.oracledba.org/10gR2/Pre_Install_10gR2.html
http://www.google.com/url?sa=t&rct=j&q=&esrc=s&frm=1&source=web&cd=9&ved=0CHUQFjAI&url=http%3A%2F%2Fcommunities.vmware.com%2Fservlet%2FJiveServlet%2FdownloadBody%2F12534-102-1-13254%2F10gR2%2520RAC%2520INSTALLATION%2520IN%2520LUNX5.pdf&ei=71A5T-jrM8jMiQLihOS_Cg&usg=AFQjCNGnBrzhvm3j9PuPNy4FLJuaxetS1A&sig2=0b8VnMefcXueFUu44-66yQ
Hope this helps,
Regards
http://www.oracleracexpert.com

[Solaris] rebooting in installing Oracle 10g R2 after Clusterware install

Hi..
Currently I am practicing the configuration of Oracle 10g R2 RAC (Solaris x86-64) with a Clusterware 10g on VMware
With the installation of Oracle Clusterware 10g software, there's no problem and look like working well on both nodes.
But, whenever I try installing the Oracle 10g R2 with 'install the software only' option, I got unstoppable rebooting
problem on the first node, rac1.
I tried both installation mode: OUI-typed and Silent approaches. Nothing worked!!
I wanted to figure out why this problem happened, but so far I did not have any bright answer for this. I looked in
the log and error files from /u01/app/oracle/oraInventory/logs, but there's no good answer or hint to resolve the
problem I have now.
Until now I tried 4 times of installations, but all stopped and were automatically rebooted at the same point with
almost 3% copying of software. I found some of trainers are having same problem I have now.
oracle@rac1 ~ $ crs_stat -t
Name           Type           Target    State     Host
ora.rac1.gsd   application    ONLINE    ONLINE    rac1
ora.rac1.ons   application    ONLINE    ONLINE    rac1
ora.rac1.vip   application    ONLINE    ONLINE    rac1
ora.rac2.gsd   application    ONLINE    ONLINE    rac2
ora.rac2.ons   application    ONLINE    ONLINE    rac2
ora.rac2.vip   application    ONLINE    ONLINE    rac2
This happens whenever I install the Oracle 10g R2 software.
Is there any unknown or hidden problem regarding CRS or something else?
Anybody has some hints or solution to this problem? If so, please let me have it ASAP.
Thank you so much.

I have gone through similar problem when installing oracle 10g in linux. You should follow the oracle installation documentation and make sure that all required OS patches and packages must be installed before starting the oracle installation. In my installation few OS packages was missing in the oracle documentation too and searching over the net solved the problem. I have installed few extra OS packages (RPM) and installed oracle successfully.
Regards
Asif Kabir

Error while installing Oracle 10g on Fedora Core 1

Error while installing Oracle 10g on Fedora Core 1. After 40% of the Installation is thru, the progress bar is showing 40%, it gives error "Not connected to Oracle" and the installation has to be terminated.
We have tried by using the on-line procedure and changing the required script to make believe it as said.

Are you createing DB also???

Error in Installing Oracle 10g Express Edition Universal on WIndows2003

While Installing Oracle 10g XE Universal On WIndows 2003 Server Standard Edition(Which is a standalone Machine). I got an following Error:
Error No: 0x80040707
Error Description: DLL Function Call Crashed: GetHostnameDll.getHostname.
Plz find some solution for the above problem.

Hi
Here's the resolution that can work for you:
Disable the "Print Spooler" service before running the installer.
1.Open Control Panel: Start --> Settings --> Control Panel
2.Double-click "Services"
3.On the list of NT Services, right-click "Print Spooler"
4.Select "Stop"
5.Select "Properties"
6.Under Startup Type, select "manual" or "disabled"
7.Reboot your NT Server
8.After rebooting, verify that the Print Spooler is still "stopped".
9.Delete Program Files\Common Files\Installshield\Engine folder
10.Re-run the installer.
11.After installation, re-set the Print Spooler service to Startup type "Automatic" and start the service.
Also, have a look at the installshield page: http://consumer.installshield.com/kb.asp?id=Q108167
-Priya

Error message when installing Oracle 10g on Windows XP Professional

Hello,
I need help installing oracle 10g database. When I attempt to run the installation from the setup.exe icon, I get a message that says
"Error in writing to directory C:\Documents and Settings\Owner\Local Settings\Temp\OraInstall2007-04-29_01-19-29PM. Please ensure this directory is writable and has atleast 45Mb of disk space. Installation cannot continue."
When I try to open the installation from the Autorun icon, it points to an innability to find setup.exe and when I go back to Setup.exe, it gives me the above error. Everytime I try to run the installation and it fails, the installation leaves a folder in my Temp folder with the above format. Any help would be appreciated. Thank you.

I do have administrative privilege on my computer and I have plenty of space. I have 80gb of free space. What do I do to successfully install the software without incurring those messages I displayed in my first thread?

Repeated ORA-12547 Messages after installing Oracle 10g

Hi,
I installed Oracle 10g on a Redhat ES 3 box, and the install went okay, but when I try and interact with the server I get the message:
ORA-12547: TNS: lost contact
For example, if I use the Database Configuration Assistant to attempt to create a database, I will see the above message when it begins the database creation process, or if I try to interact with the Oracle server using sqlplus I will see the above message after each command entered.
I had recently tried to install Oracle 8.1.7 on the same box, but abandoned that after deciding that the effort required to link Oracle 8 on RHES3 just wasn't worth it. I have been told that this previous partial installation may be the cause of the problem, and have been advised to uninstall Oracle 8, uninstall Oracle 10g, and reinstall Oracle 10g. I find it hard to believe that it would require such an action to solve this problem. Is there any configuration changes I can make to resolve it? Also, what does this message actually mean?
I am new to Oracle, so thanks for any help with this problem.
Colm.

My last message asking for a grater degree of specificity was not overly specific, hence I am posting the kernel parms that I have set with the hopes that you will spot one that I set improperly or one that I neglected to set.
[root@awyr ~]# cat /proc/sys/kernel/shmmax
2147483648
[root@awyr ~]# cat /proc/sys/kernel/shmmni
4096
[root@awyr ~]# cat /proc/sys/kernel/shmall
2097152
[root@awyr ~]# ipcs -lm |grep "min seg size"
min seg size (bytes) = 1
[root@awyr ~]# cat /proc/sys/kernel/sem | awk '{print $1}'
250
[root@awyr ~]# cat /proc/sys/kernel/sem | awk '{print $2}'
32000
[root@awyr ~]# cat /proc/sys/kernel/sem | awk '{print $3}'
100
[root@awyr ~]# cat /proc/sys/kernel/sem | awk '{print $4}'
128
[root@awyr ~]# cat /proc/sys/fs/file-max
65536
[root@awyr ~]# cat /proc/sys/net/ipv4/ip_local_port_range
1024 65000
[oracle@awyr Desktop]$ ulimit -n
63536
[oracle@awyr Desktop]$ ulimit -u
4091
[oracle@awyr Desktop]$ ulimit -a
core file size (blocks, -c) 0
data seg size (kbytes, -d) unlimited
file size (blocks, -f) unlimited
max locked memory (kbytes, -l) 32
max memory size (kbytes, -m) unlimited
open files (-n) 63536
pipe size (512 bytes, -p) 8
stack size (kbytes, -s) 8192
cpu time (seconds, -t) unlimited
max user processes (-u) 4091
virtual memory (kbytes, -v) unlimited
from sysctl -a
my fs.file-max = 65536
in my limits.conf I added:
oracle soft nofile 4096
oracle hard nofile 63536
in my (1) /etc/pam.d/system-auth (2) /etc/pam.d/sshd (3) /etc/pam.d/su (4) /etc/pam.d/login
files I added:
session required pam_limits.so
and verified that it exists
in my limits.conf I added
oracle soft nproc 2047
oracle hard nproc 16384
my /etc/oratab has:
orcl:/usr/local/oracle/app/oracle/oracle/product/10.2.0/db_1:N
I tried to change the N at the end to a Y but to no avail
my /etc/oraInst.loc has:
inventory_loc=/usr/local/oracle/app/oracle/oraInventory
inst_group=oinstall
Thanks again for your atention
Richard

How can i install oracle 10g on linux cluster

Dear all:
please advice How can i install oracle 10g on linux cluster service ..
thanks ,,

Without RAC, you can only have one instance manage the database. One instance = one set of processes communicating via IPC.
Unless you know of a way to have processes use memory-based IPC across nodes, you need to pick a node and install & run the database software on that node.

"Error In Writing to directory ..." getting the error while installing oracle 10g in laptop

Hi
I thought I'd make my first post a hijack of a vaguely related thread,
then some kind moderator could separate it out and branch it off to a post of its own.
I'm not even sure this is in the proper forum.
But anyhow ...
i am getting problem while installing oracle 10g in laptop its showing error as "Error in Writing to Directory C:\Users\Accent.Muthu\Appdata\Local\temp\OraInstall2011-03-03-10-51-53 AM.
Please ensure that the directory is writable and has atleast of 45 MB of disk space.Installation can not continue.
so please tell me the solution as soon as possible
thanks,
arshad ayub

Try the few resolutions mentioned here -
forms 10g installation error in writing to directory
Specially -
do not try to install from directory which has a space in its path
TMP and TEMP environment variables are set correctly, preferably to C:/tempRegards,
Anuj

Installing Oracle 10g db on Linux4 on VMWare Workstation

Similar Messages

Maybe you are looking for