Installing Oracle 10g rac on linux 4 using vmware :problem
Hi Expert ,
I'm facing problem on installing oracle 10g rac on centos 4x using vmware, installation is showing errors . The command failed are oifcfg, cluvfy
on running ./cluvfy stage -post crsinst -n rac1,rac2
error:
OCR integrity found invalid for rac1
OCR integrity found invalid for rac2
Please advice...
regards,
Shaan
hi Experts,
orccheck failed for one of the node, can you please suggest what needs to be done now..
filename :/dev/raw/raw1
error "device/file integrity check failed"
error "device not configured"
Regards
Message was edited by:
Shaan_dmp
Similar Messages
-
Having problems in ocfs2 while installing oracle 10g rac on linux as 4
this is the frist time i am try to install oracle rac based on three PCs after installing ocfs2 when i try to configure nodes through console i see the following msg "Could not start cluster stack .this must be resolved before any OCFS2 file system can be mounted "
Please check the user guide
http://oss.oracle.com/projects/ocfs2/dist/documentation/01-cluster_start_stop.pdf
Regards
Jason -
Oracle 10g installation on linux using virtual box.
Hi,
Iam trying to install oracle 10g on enterprise linux using virtual box.I downloaded oracle 10g for linux and while running the installer,Iam getting this error
Exception in thread "main" java.lang.UnsatisfiedLinkError: /tmp/OraInstall2010-04-16_07-29-46AM/jre/1.4.2/lib/i386/libawt.so: libXp.so.6: cannot open shared object file: No such file or directory
at java.lang.ClassLoader$NativeLibrary.load(Native Method)
at java.lang.ClassLoader.loadLibrary0(Unknown Source)
at java.lang.ClassLoader.loadLibrary(Unknown Source)
at java.lang.Runtime.loadLibrary0(Unknown Source)
at java.lang.System.loadLibrary(Unknown Source)
at sun.security.action.LoadLibraryAction.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at sun.awt.NativeLibLoader.loadLibraries(Unknown Source)
at sun.awt.DebugHelper.<clinit>(Unknown Source)
at java.awt.Component.<clinit>(Unknown Source)
Please help me to solve thisuser9362721 wrote:
Hi,
Iam trying to install oracle 10g on enterprise linux using virtual box.I downloaded oracle 10g for linux and while running the installer,Iam getting this error
Exception in thread "main" java.lang.UnsatisfiedLinkError: /tmp/OraInstall2010-04-16_07-29-46AM/jre/1.4.2/lib/i386/libawt.so: libXp.so.6: cannot open shared object file: No such file or directoryHi.
This question was answered in this forum yesterday. And the day before. And the day before that. And ... (Or at least it feels like we get this every day, and sometimes several times a day.)
Search for 'xhost' -
Error While Installing ORACLE 10g in Redhat Linux 5.0
Hi all,
Anybody please guide me regarding the posted error.
I'm trying to install ORACLE 10g in Redhat Linux 5.0 and finding error as "Exception in thread "main" java.lang.UnsatisfiedLinkError: /tmp/OraInstall2009-10-15_09-20-56PM/jre/1.4.2/lib/i386/libawt.so: libXp.so.6: cannot open shared object file: No such file or directory
at java.lang.ClassLoader$NativeLibrary.load(Native Method)
at java.lang.ClassLoader.loadLibrary0(Unknown Source)
at java.lang.ClassLoader.loadLibrary(Unknown Source)
at java.lang.Runtime.loadLibrary0(Unknown Source)
at java.lang.System.loadLibrary(Unknown Source)
at sun.security.action.LoadLibraryAction.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at sun.awt.NativeLibLoader.loadLibraries(Unknown Source)
at sun.awt.DebugHelper.<clinit>(Unknown Source)
at java.awt.Component.<clinit>(Unknown Source)
I tired a lot to sort it out but unable to resolve.So please tell me the possible ways.
I appreciate all types of clarifications...
Thanks in Advance
Sajeev GeorgeSajeevcmc wrote:
Hi,
Thanks for the reply.
Could you please tell me the rpm full name and where i can download the same?
Thanks in Advance
SAJEEV GEORGEYou need to have the following packages installed already before starting Oracle installation
http://download.oracle.com/docs/cd/B19306_01/install.102/b15669/pre_install.htm#sthref80
binutils-2.15.92.0.2-10.EL4
compat-db-4.1.25-9
control-center-2.8.0-12
gcc-3.4.3-9.EL4
gcc-c++-3.4.3-9.EL4
glibc-2.3.4-2
glibc-common-2.3.4-2
gnome-libs-1.4.1.2.90-44.1
libstdc++-3.4.3-9.EL4
libstdc++-devel-3.4.3-9.EL4
make-3.80-5
pdksh-5.2.14-30
sysstat-5.0.5-1
xscreensaver-4.18-5.rhel4.2
And from the following link, you can get the same list:
http://www.puschitz.com/InstallingOracle10g.shtml (Go to Checking Software Packages (RPMs))
And from my installation guide you can easily install Oracle on Linux by following step by step instruction
[Step by Step Installing Oracle Database 10g Release 2 on Linux (CentOS) and AUTOMATE the installation using Linux Shell Script|http://kamranagayev.wordpress.com/2009/05/01/step-by-step-installing-oracle-database-10g-release-2-on-linux-centos-and-automate-the-installation-using-linux-shell-script/] -
Can you install Oracle 10g on REDHAT LINUX ENTERPRISE WS?
According to oracle documentation, it says you can install oracle10g on Redhat enterprise version 3 or 4, but it doesn't specify whether its Red Hat Enterprise Linux AS or WS. Can you install oracle 10g on Rehat Linux Enterprise WS?
Oracle Certificaction Matrices says only RedHat AS/ES is supported for database. AFAIK WS means workstation.
Also this link is very clear: http://kbase.redhat.com/faq/FAQ_61_1135.shtm
Besides the above sentences... If the WS installation is providing all required packages (listed in installtion prerequisites) I belive that Oracle DB could be installed on WS but as I (and the above link) said it is not officialy supported. -
This problem appears while installing oracle 10g on enterprise linux
Hi All,
While installing oracle 10g on enterprise linux 5 this message apear:
http://img134.imageshack.us/my.php?image=problemqy2.png
More Info:
Oracle 10g supports redhat 4 and Enterprise Linux is redhat 5 so I changed the redhat-release to 4 to countinue setup but the above error appears, also I tried this configuration on SuSE 10 I changed the SuSE-release to 9 and went good.The packeges are already installedIf you execute runInstaller again is the error message the same as before?
If yes can you post output for this command?
rpm -qa --qf '%{name}-%{version}-%{release}.%{arch}\n'|grep -i 'libxp' -
Not able to install Oracle 10g Express on linux 64bit based on Dude's intr
I followed "https://forums.oracle.com/forums/thread.jspa?threadID=2200434" to install oracle 10g xe on Ubuntu 10.10 AMD 64-bit
but I ran into below error while I was trying to install 10g XE on linux 64bit
root@vdevluxcnhz0021:~# dpkg -i force-architecture libaio_0.3.104-1_i386.deb --------- this step is error
dpkg: warning: overriding problem because --force enabled:
package architecture (i386) does not match system (amd64)
dpkg: regarding libaio_0.3.104-1_i386.deb containing libaio:
libaio1 conflicts with libaio
libaio (version 0.3.104-1) is to be installed.
dpkg: error processing libaio_0.3.104-1_i386.deb (--install):
conflicting packages - not installing libaio
Errors were encountered while processing:
libaio_0.3.104-1_i386.deb
Linux version
root@vdevluxcnhz0021:~# cat /etc/issue
Ubuntu 10.04.2 LTS \n \l
root@vdevluxcnhz0021:~# cat /proc/version
Linux version 2.6.32-28-server (buildd@allspice) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #55-Ubuntu SMP Mon Jan 10 23:57:16 UTC 2011
Can you please help on this?
Thanks
Edited by: user1997872 on Jan 4, 2012 7:07 AMIt looks like you will have to uninstall "libaio1", but I don't know for sure and don't have Ubuntu 10.4 available right now to play with.
Sorry but the instructions are for Ubuntu 10.10, not 10.4, which is different.
If you need to install XE on Ubuntu, I'd rather suggest 11gR2 XE:
Install Oracle 11gR2 Express Edition on Ubuntu Linux 11.04 (64-bit) Howto
Install Oracle 11gR2 Express Edition on Ubuntu Linux 11.04 (64-bit) Howto
Oracle 11gR2 Express Edition on Linux Ubuntu 11.10 how-to
Oracle 11gR2 Express Edition on Linux Ubuntu 11.10 howto -
How to install oracle 10g on suse linux
Hi,
can anybody let me kbow how to install oracle 10.2 on suse linux.....
i have installed suse linux but couldn;t able to install oracle 10g on the same....
looking for gud suggestion.....These two are good to start with
Installing Oracle Database 10g on SUSE Linux Enterprise Server 9 and on SUSE Linux Professional 9.1, 9.2, and 9.3
http://www.puschitz.com/InstallingOracle10gOnSUSE.shtml
Oracle Products on SUSE Linux Enterprise: Documents
http://www.novell.com/products/server/oracle/documents.html -
Installing Oracle 10g in Enterprise Linux 4
Hi friends,
I dont know how to install oracle 10g express edition in Enterprise linux 4.
Am new to linux environment.
And i have downloaded the rpm file from oracle website.
Please help me...
thanks in advance....Hi Sunil
Please find the below link
http://www.oracle.com/technology/pub/articles/smiley_10gdb_install.html
you can install by these steps.
Regards
Khan -
Installing oracle 10g on windows XP is giving problem
Iam successfully installed oracle 10g on top of that iam installing some scripts to load ALUI.(aqua logic user interaction)
in that when iam running this script (CreateService.bat PLUM10 plum10) facing below error.
D:\oracle\product\10.2.0\admin\PLUM10\plumtreescripts>CreateService.bat PLUM10 p
lum10
D:\oracle\product\10.2.0\admin\PLUM10\plumtreescripts>ORADIM -NEW -SID PLUM10 -I
NTPWD plum10 -STARTMODE AUTO -PFILE D:\oracle\admin\PLUM10\pfile\initPLUM10.ora
1>>CreateService.log
D:\oracle\product\10.2.0\admin\PLUM10\plumtreescripts>SET ORACLE_SID=PLUM10
D:\oracle\product\10.2.0\admin\PLUM10\plumtreescripts>echo PLUM10 1>>SetEnvServ
ice.log
D:\oracle\product\10.2.0\admin\PLUM10\plumtreescripts>type CreateService.log
Unable to find error file %ORACLE_HOME%\RDBMS\opw<lang>.msb
Message 51 not found; No message file for product=RDBMS, facility=ORADIM
Unable to find error file %ORACLE_HOME%\RDBMS\opw<lang>.msb
DIM-00019: Message 19 not found; No message file for product=RDBMS, facility=ORA
DIM
O/S-Error: (OS 1073) The specified service already exists.
Unable to find error file %ORACLE_HOME%\RDBMS\opw<lang>.msb
DIM-00019: Message 19 not found; No message file for product=RDBMS, facility=ORA
DIM
O/S-Error: (OS 1073) The specified service already exists.
Unable to find error file %ORACLE_HOME%\RDBMS\opw<lang>.msb
Message 51 not found; No message file for product=RDBMS, facility=ORADIM
Unable to find error file %ORACLE_HOME%\RDBMS\opw<lang>.msb
DIM-00019: Message 19 not found; No message file for product=RDBMS, facility=ORA
DIM
O/S-Error: (OS 1073) The specified service already exists.
Unable to find error file %ORACLE_HOME%\RDBMS\opw<lang>.msb
DIM-00019: Message 19 not found; No message file for product=RDBMS, facility=ORA
DIM
O/S-Error: (OS 1073) The specified service already exists.
Unable to find error file %ORACLE_HOME%\RDBMS\opw<lang>.msb
DIM-00019: Message 19 not found; No message file for product=RDBMS, facility=ORA
DIM
O/S-Error: (OS 1073) The specified service already exists.
D:\oracle\product\10.2.0\admin\PLUM10\plumtreescripts>
If any body help is much needed...
Thanks u so much...maybeSET ORACLE_HOME=D:\oracle\product\10.2.0
-
Installing Oracle 10g db on Linux4 on VMWare Workstation
Checking Network Configuration Settings................ Warning
Check complete: The overall result of this check is : Failed <<<<
Problem: The install has detected that the primary ip address of the system is DHCP-assaigned
REcommendation: ORacle supports installations on systems with DHCP-assigned public IP address. However the primary interface on the system should be configured with a static IP address in order for the Oracle Software to funtion properly.
I want to install O10g on Linux on VMware and I need to work on it.
Please suggest me how can I proceed further........
Thanks in advance..............LakshmanLaskhmanK wrote:
Checking Network Configuration Settings................ Warning
Check complete: The overall result of this check is : Failed <<<<
Problem: The install has detected that the primary ip address of the system is DHCP-assaigned
REcommendation: ORacle supports installations on systems with DHCP-assigned public IP address. However the primary interface on the system should be configured with a static IP address in order for the Oracle Software to funtion properly.
I want to install O10g on Linux on VMware and I need to work on it.
Please suggest me how can I proceed further........The usual approach I would use is to read the message and take the recommended action.
In this case it says "However the primary interface on the system should be configured with a static IP address", so I would probably take that action.
As far as I know there is no Distro called 'Linux4'. Once you identify the distro properly, you might get an explanation of the basic steps to do network admin on the box. If that distro is some variant on Red Hat, you could use the CentOS docs at http://centos.org/docs/4/ , in particular Section IV. -
Problem with installing Oracle 10g on Suse Linux
Hi everybody!
I downloaded Oracle 10g Express from this url:
http://www.oracle.com/technology/software/products/database/xe/htdocs/102xelinsoft.html
it is free version for developers.
I copied it into computer where was installed Suse Linux Enterprise Edition.
But when I run it shows this kind of error:
error: rpmReadSignature failed: region failed: BAD, tag 15872 type 2047 offset 20480 count 4096
error: oracle-xe-univ-10.2.0.1-1.i386.rpm cannot be installed
It was downloaded without any problem. But checksum is different from that shown on website. I think this is the problem.
What is the problem? Does anybody know answer?
Regards,
Seti's fictionYes, you appear to have a bad copy.
I have not had a problem when the check sum matched. Therefore I encourage you to download again. -
Error at installing Oracle 10g database on Linux 5.4 (64 bits)
Hello:
I'm installing Oracle 10.2.0.1 on Red Hat Enterprise Linux Server release 5.4 (Tikanga), kernel 2.6.18-164.el5 #1 x86_64 x86_64 x86_64 GNU/Linux.
I get the following error in OUI at the link phase:
Error calling target 'agent nmo nmb' of makefile '/opt/oracle/product/10.2/sysman/lib/ins_sysman.mk'
Here, the errors I found in the make.log file:
make -f /opt/oracle/product/10.2/sysman/lib/ins_sysman.mk relink_exe EXENAME=e2eme
make[1]: se ingresa al directorio `/opt/oracle/product/10.2/sysman/lib'
gcc -m32 -trigraphs -fPIC -m32 -o /opt/oracle/product/10.2/sysman/lib/e2eme -L/opt/oracle/product/10.2/sysman//lib32/ -L/opt/oracle/product/10.2/lib32/ -L/opt/oracle/product/10.2/lib32/stubs/ /opt/oracle/product/10.2/sysman/lib32/nmaj.o /opt/oracle/product/10.2/sysman/lib32/nmajclbk.o /opt/oracle/product/10.2/sysman/lib32/nmajrules.o /opt/oracle/product/10.2/sysman/lib32/nmajutl.o /opt/oracle/product/10.2/sysman/lib32/nmajout.o /opt/oracle/product/10.2/sysman/lib32/nmajsm.o /opt/oracle/product/10.2/sysman/lib32/snmajutl.o /opt/oracle/product/10.2/sysman/lib32/snmajmn.o /opt/oracle/product/10.2/sysman/lib32/snmajpt.o /opt/oracle/product/10.2/sysman/lib32/ssnmajed.o /opt/oracle/product/10.2/sysman/lib32/libnmadbg.a /opt/oracle/product/10.2/sysman/lib32/libnmadm.a /opt/oracle/product/10.2/sysman/lib32/libnmalk.a /opt/oracle/product/10.2/sysman/lib32/libnmarl.a /opt/oracle/product/10.2/sysman/lib32/libnmasf.a /opt/oracle/product/10.2/sysman/lib32/libnmastk.a -lxml10 -lcore10 -lnls10 -lunls10 -lclntsh -Wl,-rpath,/opt/oracle/product/10.2/lib `cat /opt/oracle/product/10.2/lib32/sysliblist` -ldl -lm -lpthread -lnsl -lm -ldl -ln10
/opt/oracle/product/10.2/lib32//libnls10.a(lmsagb.o): In function `lmsagbcmt':
lmsagb.c:(.text+0xa3): undefined reference to `SltsPrRead'
lmsagb.c:(.text+0x10a): undefined reference to `SltsPrUnlock'
/opt/oracle/product/10.2/lib32//libnls10.a(lmsagb.o): In function `lmsagb1':
lmsagb.c:(.text+0x47e): undefined reference to `SltsPrUnlock'
lmsagb.c:(.text+0x48a): undefined reference to `SltsPrWrite'
/opt/oracle/product/10.2/lib32//libnls10.a(lmsamts.o): In function `lmsamtsini':
lmsamts.c:(.text+0xa5): undefined reference to `SltsPrInit'
/opt/oracle/product/10.2/lib32//libnls10.a(lmsamts.o): In function `lmsamtster':
lmsamts.c:(.text+0x255): undefined reference to `SltsPrDestroy'
/opt/oracle/product/10.2/lib32//libnls10.a(lxldlbb.o): In function `lxldlbb':
lxldlbb.c:(.text+0x37f): undefined reference to `slste2a'
/opt/oracle/product/10.2/lib32//libnls10.a(lxlfrd.o): In function `lxladjobj':
lxlfrd.c:(.text+0x551): undefined reference to `slste2a'
lxlfrd.c:(.text+0x147d): undefined reference to `slste2a'
lxlfrd.c:(.text+0x1510): undefined reference to `slste2a'
lxlfrd.c:(.text+0x15aa): undefined reference to `slste2a'
/opt/oracle/product/10.2/lib32//libnls10.a(lxlfrd.o):lxlfrd.c:(.text+0x1607): more undefined references to `slste2a' follow
/opt/oracle/product/10.2/lib32//libnls10.a(lxlgsz.o): In function `lxlgsz':
lxlgsz.c:(.text+0x82): undefined reference to `lcvb2w'
/opt/oracle/product/10.2/lib32//libnls10.a(lxocmpst.o): In function `lxoCmpStr':
lxocmpst.c:(.text+0x3a3): undefined reference to `lmebucp'
/opt/oracle/product/10.2/lib32//libnls10.a(slms.o): In function `slmspe':
slms.c:(.text+0x6c5): undefined reference to `slcgems'
/opt/oracle/product/10.2/lib32//libnls10.a(lxscdj.o): In function `lxscdja':
lxscdj.c:(.text+0x1a4): undefined reference to `slmaacb'
lxscdj.c:(.text+0x1bc): undefined reference to `slmaacb'
/opt/oracle/product/10.2/lib32//libnls10.a(lxscdj.o): In function `lxscdjl':
lxscdj.c:(.text+0x3dc): undefined reference to `slmaacb'
lxscdj.c:(.text+0x3f1): undefined reference to `slmaacb'
/opt/oracle/product/10.2/lib32//libnls10.a(lxscdt.o): In function `lxscdth':
lxscdt.c:(.text+0x125): undefined reference to `slmaacb'
/opt/oracle/product/10.2/lib32//libnls10.a(lxscdt.o):lxscdt.c:(.text+0x13d): more undefined references to `slmaacb' follow
/opt/oracle/product/10.2/lib32//libnls10.a(lxecg2e.o): In function `lxecg2e':
lxecg2e.c:(.text+0xb0): undefined reference to `ldxnbeg'
lxecg2e.c:(.text+0xf2): undefined reference to `ldxdtd'
lxecg2e.c:(.text+0x270): undefined reference to `ldxdtd'
lxecg2e.c:(.text+0x2d7): undefined reference to `ldxdtd'
lxecg2e.c:(.text+0x493): undefined reference to `ldxdtd'
lxecg2e.c:(.text+0x681): undefined reference to `ldxdtd'
lxecg2e.c:(.text+0x6b7): undefined reference to `ldxdfd'
/opt/oracle/product/10.2/lib32//libnls10.a(lxecg2i.o): In function `lxecg2i':
lxecg2i.c:(.text+0xf0): undefined reference to `ldxnbeg'
lxecg2i.c:(.text+0x120): undefined reference to `ldxdfd'
lxecg2i.c:(.text+0x164): undefined reference to `ldxdtd'
lxecg2i.c:(.text+0x204): undefined reference to `ldxnbeg'
lxecg2i.c:(.text+0x231): undefined reference to `ldxdtd'
lxecg2i.c:(.text+0x314): undefined reference to `ldxnbeg'
lxecg2i.c:(.text+0x340): undefined reference to `ldxdfd'
/opt/oracle/product/10.2/lib32//libnls10.a(lxecg2l.o): In function `lxecg2l':
lxecg2l.c:(.text+0x13f): undefined reference to `ldxnbeg'
lxecg2l.c:(.text+0x16f): undefined reference to `ldxdtd'
lxecg2l.c:(.text+0x48b): undefined reference to `ldxnbeg'
lxecg2l.c:(.text+0x4b7): undefined reference to `ldxdfd'
/opt/oracle/product/10.2/lib32//libunls10.a(lxu4tstc.o): In function `lxu4TstClsXMLPubidChar0':
lxu4tstc.c:(.text+0x8b4): undefined reference to `lxpTstClsXMLPubidCharTbl'
/opt/oracle/product/10.2/lib32//libunls10.a(lxu4dec.o): In function `lxu4Decomposition':
lxu4dec.c:(.text+0x18b): undefined reference to `lxujmd'
collect2: ld devolvió el estado de salida 1
make[1]: *** [opt/oracle/product/10.2/sysman/lib/e2eme] Error 1
make[1]: se sale del directorio `/opt/oracle/product/10.2/sysman/lib'
make: *** [e2eme] Error 2
Any ideas?
Thank you in advance,Hi albrotar,
# mount /dev/cdrom /mnt; cd /mnt/Server
# rpm -ivh libgomp-4.4.0-6.el5.x86_64.rpm \
kernel-headers-2.6.18-164.el5.x86_64.rpm \
glibc-headers-2.5-42.x86_64.rpm \
libstdc++-devel-4.1.2-46.el5.x86_64.rpm \
sysstat-7.0.2-3.el5.x86_64.rpm \
glibc-devel-2.5-42.x86_64.rpm \
libaio-devel-0.3.106-3.2.x86_64.rpm \
gcc-4.1.2-46.el5.x86_64.rpm \
gcc-c++-4.1.2-46.el5.x86_64.rpm \
elfutils-libelf-devel-static-0.137-3.el5.x86_64.rpm \
elfutils-libelf-devel-0.137-3.el5.x86_64.rpm \
libtermcap-devel-2.0.8-46.1.x86_64.rpm \
readline-devel-5.1-3.el5.x86_64.rpm \
unixODBC-2.2.11-7.1.x86_64.rpm \
unixODBC-devel-2.2.11-7.1.x86_64.rpm \
glibc-devel-2.5-42.i386.rpm \
libaio-devel-0.3.106-3.2.i386.rpm \
unixODBC-2.2.11-7.1.i386.rpm \
unixODBC-devel-2.2.11-7.1.i386.rpm \
compat-db-4.2.52-5.1.x86_64.rpm \
compat-gcc-34-3.4.6-4.x86_64.rpm \
compat-gcc-34-c++-3.4.6-4.x86_64.rpm \
gdb-6.8-37.el5.x86_64.rpm \
libXp-1.0.0-8.1.el5.i386.rpm \
libstdc++-devel-4.1.2-46.el5.i386.rpmdid you installl all this packages?
Cheers,
David
OCP 9i / 10g / 11g
http://www.oratoolkit.ch/knowledge/howto/installation/eeSrv-10g-R2-on-RHEL-5.4-x86_64.php -
Installing oracle 10g RAC on sun cluster
Hi
we r implementing new setup with fallowing configuration
OS: sun solaris 10 on sunfire v890 servers 2 node rac
4 processor server sun SPARC 64 bit
SUN cluster
oracle :10.2.0.3
please send me related documents for installing CRS and RdBMS and
Message was edited by:
Adithya
Message was edited by:
AdithyaInstallation Guide for Solaris Cluster 3.2 Software and Oracle 10g Release 2 Real Application Clusters
-
Install oracle 9i rac access from both node problem
Hai,
Recently we have planned to move oracle 9i rac databases to new servers. Our current configuration is oracle 9i rac (9.2.0.4) and aix 5.3 with hacmp 5.4
mksysb backup has been taken from old machine and restored in the new machine. For oracle binarys, tar have been done and restored in the new machine.
Now after restoring the database, i am able to mount and open from the one server at a time. If i try to mount the database from second machine it is hanging. Kindly help us to solve the problem.lmon registered with NM - instance id 1 (internal mem no 0)
After the above mentioned line, no other errors.
Maybe you are looking for
-
Hello Guyz I have basic question on setting up Pricing. I have three condition types, PR00(price), ZK04 (Discount) and ZTKK (Tax). I went to set procedure as PR00 = $4 ZK04 = $2 Net price = $2 ZTKK = $3 Final Price = $5. How do I maintain
-
How to restrict the modification of a process form field.
Hi, Is there a way out to restrict the modification of a process form field. I have a process form field loginid which can not be updated in a target. I want to achieve the same in OIM. I have not created any update task for the field but if the user
-
Ipod 5th Gen not showing iOS7 update.
I went to upgrade my Son's ipod touch 5th gen, and it would not give me the option to upgrade to ios7. It showed the software running was 6.1.3 and that it was up to date. The model of his ipod is MD720LL/A. Thought all 5th gens got iOS7?
-
Hi , On my test lab i am checking Failover to physical standby using sqlplus on 11202 . I followed the example from : http://www.visi.com/~mseberg/resources.html Its seems that i made somthing wrong since BOTH standby and primary currently shows: SQL
-
Can't install the java 1.6.0_10
ok i've tried both online & offline installers.& can't install it. this is the error message i get eith the offline installer. the error code is 1330 & cabinet file is missing.this prob started after i scanned for virus trouble & my virus program rem