Installing Oracle 10g throught console

Hi
Im a newbie, trying to install oracle 10g v(10.2.0.1.0) on my Linux server which has non-graphical environment.
Can anybody guide me to install the above setup into a console based environment?
Peter

Please delete this thread i unfortunately post it in wrong forum
Sorry for inconvenience

Similar Messages

Installing Oracle 10g through console

Hi
Im a newbie, trying to install oracle 10g v(10.2.0.1.0) on my Linux server which has non-graphical environment.
Can anybody guide me to install the above setup into a console/command prompt based environment?
Peter
Edited by: user10707566 on Jan 23, 2009 11:15 AM

Hello,
You can make use of response file to install oracle software silent mode or non-interactive. You can find a reponse file under ../response/enterprise.rsp
You can find detailed information about using reponse file and how to install in non-interactive method
http://download.oracle.com/docs/cd/B19306_01/install.102/b15662/app_nonint.htm#sthref394
Regards

Error while installing Oracle 10g on Fedora Core 1

Error while installing Oracle 10g on Fedora Core 1. After 40% of the Installation is thru, the progress bar is showing 40%, it gives error "Not connected to Oracle" and the installation has to be terminated.
We have tried by using the on-line procedure and changing the required script to make believe it as said.

Are you createing DB also???

Error in Installing Oracle 10g Express Edition Universal on WIndows2003

While Installing Oracle 10g XE Universal On WIndows 2003 Server Standard Edition(Which is a standalone Machine). I got an following Error:
Error No: 0x80040707
Error Description: DLL Function Call Crashed: GetHostnameDll.getHostname.
Plz find some solution for the above problem.

Hi
Here's the resolution that can work for you:
Disable the "Print Spooler" service before running the installer.
1.Open Control Panel: Start --> Settings --> Control Panel
2.Double-click "Services"
3.On the list of NT Services, right-click "Print Spooler"
4.Select "Stop"
5.Select "Properties"
6.Under Startup Type, select "manual" or "disabled"
7.Reboot your NT Server
8.After rebooting, verify that the Print Spooler is still "stopped".
9.Delete Program Files\Common Files\Installshield\Engine folder
10.Re-run the installer.
11.After installation, re-set the Print Spooler service to Startup type "Automatic" and start the service.
Also, have a look at the installshield page: http://consumer.installshield.com/kb.asp?id=Q108167
-Priya

Error message when installing Oracle 10g on Windows XP Professional

Hello,
I need help installing oracle 10g database. When I attempt to run the installation from the setup.exe icon, I get a message that says
"Error in writing to directory C:\Documents and Settings\Owner\Local Settings\Temp\OraInstall2007-04-29_01-19-29PM. Please ensure this directory is writable and has atleast 45Mb of disk space. Installation cannot continue."
When I try to open the installation from the Autorun icon, it points to an innability to find setup.exe and when I go back to Setup.exe, it gives me the above error. Everytime I try to run the installation and it fails, the installation leaves a folder in my Temp folder with the above format. Any help would be appreciated. Thank you.

I do have administrative privilege on my computer and I have plenty of space. I have 80gb of free space. What do I do to successfully install the software without incurring those messages I displayed in my first thread?

Repeated ORA-12547 Messages after installing Oracle 10g

Hi,
I installed Oracle 10g on a Redhat ES 3 box, and the install went okay, but when I try and interact with the server I get the message:
ORA-12547: TNS: lost contact
For example, if I use the Database Configuration Assistant to attempt to create a database, I will see the above message when it begins the database creation process, or if I try to interact with the Oracle server using sqlplus I will see the above message after each command entered.
I had recently tried to install Oracle 8.1.7 on the same box, but abandoned that after deciding that the effort required to link Oracle 8 on RHES3 just wasn't worth it. I have been told that this previous partial installation may be the cause of the problem, and have been advised to uninstall Oracle 8, uninstall Oracle 10g, and reinstall Oracle 10g. I find it hard to believe that it would require such an action to solve this problem. Is there any configuration changes I can make to resolve it? Also, what does this message actually mean?
I am new to Oracle, so thanks for any help with this problem.
Colm.

My last message asking for a grater degree of specificity was not overly specific, hence I am posting the kernel parms that I have set with the hopes that you will spot one that I set improperly or one that I neglected to set.
[root@awyr ~]# cat /proc/sys/kernel/shmmax
2147483648
[root@awyr ~]# cat /proc/sys/kernel/shmmni
4096
[root@awyr ~]# cat /proc/sys/kernel/shmall
2097152
[root@awyr ~]# ipcs -lm |grep "min seg size"
min seg size (bytes) = 1
[root@awyr ~]# cat /proc/sys/kernel/sem | awk '{print $1}'
250
[root@awyr ~]# cat /proc/sys/kernel/sem | awk '{print $2}'
32000
[root@awyr ~]# cat /proc/sys/kernel/sem | awk '{print $3}'
100
[root@awyr ~]# cat /proc/sys/kernel/sem | awk '{print $4}'
128
[root@awyr ~]# cat /proc/sys/fs/file-max
65536
[root@awyr ~]# cat /proc/sys/net/ipv4/ip_local_port_range
1024 65000
[oracle@awyr Desktop]$ ulimit -n
63536
[oracle@awyr Desktop]$ ulimit -u
4091
[oracle@awyr Desktop]$ ulimit -a
core file size (blocks, -c) 0
data seg size (kbytes, -d) unlimited
file size (blocks, -f) unlimited
max locked memory (kbytes, -l) 32
max memory size (kbytes, -m) unlimited
open files (-n) 63536
pipe size (512 bytes, -p) 8
stack size (kbytes, -s) 8192
cpu time (seconds, -t) unlimited
max user processes (-u) 4091
virtual memory (kbytes, -v) unlimited
from sysctl -a
my fs.file-max = 65536
in my limits.conf I added:
oracle soft nofile 4096
oracle hard nofile 63536
in my (1) /etc/pam.d/system-auth (2) /etc/pam.d/sshd (3) /etc/pam.d/su (4) /etc/pam.d/login
files I added:
session required pam_limits.so
and verified that it exists
in my limits.conf I added
oracle soft nproc 2047
oracle hard nproc 16384
my /etc/oratab has:
orcl:/usr/local/oracle/app/oracle/oracle/product/10.2.0/db_1:N
I tried to change the N at the end to a Y but to no avail
my /etc/oraInst.loc has:
inventory_loc=/usr/local/oracle/app/oracle/oraInventory
inst_group=oinstall
Thanks again for your atention
Richard

How can i install oracle 10g on linux cluster

Dear all:
please advice How can i install oracle 10g on linux cluster service ..
thanks ,,

Without RAC, you can only have one instance manage the database. One instance = one set of processes communicating via IPC.
Unless you know of a way to have processes use memory-based IPC across nodes, you need to pick a node and install & run the database software on that node.

"Error In Writing to directory ..." getting the error while installing oracle 10g in laptop

Hi
I thought I'd make my first post a hijack of a vaguely related thread,
then some kind moderator could separate it out and branch it off to a post of its own.
I'm not even sure this is in the proper forum.
But anyhow ...
i am getting problem while installing oracle 10g in laptop its showing error as "Error in Writing to Directory C:\Users\Accent.Muthu\Appdata\Local\temp\OraInstall2011-03-03-10-51-53 AM.
Please ensure that the directory is writable and has atleast of 45 MB of disk space.Installation can not continue.
so please tell me the solution as soon as possible
thanks,
arshad ayub

Try the few resolutions mentioned here -
forms 10g installation error in writing to directory
Specially -
do not try to install from directory which has a space in its path
TMP and TEMP environment variables are set correctly, preferably to C:/tempRegards,
Anuj

Installing oracle 10g release 2 on spark solaris!! urgent help!

hi guys!
Am installing oracle 10g r2 on spark sun solaris. I did install the software without any pb, but when installing the database using dbca, I have this errors.
ORA-27154: post/wait create failed
ORA-27300: OS system dependent operation:semget failed with status: 28
ORA-27301: OS failure message: No space left on device
ORA-27302: failure occurred at: sskgpcreates
Edited my kernel parameters and in the /etc/system file, ai've added
set noexec_user_stack=1
set semsys:seminfo_semmni=100
set semsys:seminfo_semmns=1024
set semsys:seminfo_semmsl=256
set semsys:seminfo_semvmx=32767
set shmsys:shminfo_shmmax=4294967295
set shmsys:shminfo_shmmin=1
set shmsys:shminfo_shmmni=100
set shmsys:shminfo_shmseg=10
Space aint an issue and dont know how to over come this error!
Should ai just install the db using scripts and run the neccessary .sql scripts instead of going through dbca?
junior DBA in distress.

This appears to be because of low semaphores setting. Did you reboot your server after making the /etc/system parameter changes ?
-Ramesh

Installing Oracle 10g release 2 on RHEL4

I am new with Linux and Oracle, and I have been assigned to install Oracle 10g Rel 2 in RHEL4 OS.
I have checked and installed missing RPM's and created group users, passwd, configered Kernel, set Shell limits and finally created directories on root as so,
mkdir -p /u01/app/oracle
chown -R oracle:oinstall/u01/app/oracle
chmod -R 775 /u01/app/oracle
After, I mount the CD on root
mount /media/cdrom
After mounting is complete i enter into oracle user and do the following
su - oracle
cd /media/cdrom
./runInstaller
However, I receive the following message : Olite installation requires ORACLE_HOME to be set. PLease set it and retry again.
So I set the following like so,
export ORACLE_BASE=/u01/app/oracle
export ORACLE_HOME=/u01/app/oracle
export ORACLE_SID= demo1
./runInstaller
I than get the following message.
Olite installation requires JAVA13_HOME to be set. PLease set it JDK 1.4.1 install area and rety again.
I am not sure what JAVA13_HOME is but I am wondering if it is related to some Mobile sync. Also, could somebody help me and advise if I am going in the right direction here?
Many thanks in advance.
Alex

Hi Alex
Can you please control that ?
JAVA13_HOME will be the location for your JAVA home. You can check the path for your java installtion, either 1.3 or 1.4 and set the path accordingly. Usually in Linux the path will be some thing like /local/java/jdk1.4.2.
TNS_ADMIN should point to $ORACLE_HOME/network/admin
Please read that also http://download.oracle.com/docs/cd/B28928_01/doc/server.103/b28924/preinstall.htm
Let us know if it helps you.
thanks

Getting Error while installing oracle 10g 1.0.2.0 on Redhat - linux 64bit

I am installing oracle 10g on Redhat 64bit (VM ware). In the middle it gives some error oracle Net services cancelled. Please see the error message below and advise.
Configuration assistant "Oracle Net Configuration Assistant" was canceled.
The "/u01/app/oracle/product/10.2.0/db_1/cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled.
This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.
Output generated from configuration assistant "Oracle Net Configuration Assistant":
Command = /u01/app/oracle/product/10.2.0/db_1/jdk/jre//bin/java -Duser.dir=/u01/app/oracle/product/10.2.0/db_1/network/jlib -classpath /u01/app/oracle/product/10.2.0/db_1/jdk/jre//lib/i18n.jar:/u01/app/oracle/product/10.2.0/db_1/jdk/jre//lib/rt.jar:/
u01/app/oracle/product/10.2.0/db_1/jlib/ewt3.jar:/u01/app/oracle/product/10.2.0/db_1/jlib/ewtcompat-3_3_15.jar:/u01/app/oracle/product/10.2.0/db_1/jlib/netcfg.jar:/u01/app/oracle/product/10.2.0/db_1/network/jlib/netcam.jar:/
u01/app/oracle/product/10.2.0/db_1/network/jlib/netca.jar:/u01/app/oracle/product/10.2.0/db_1/jlib/help4.jar:/
u01/app/oracle/product/10.2.0/db_1/jlib/jewt4.jar:/u01/app/oracle/product/10.2.0/db_1/jlib/oracle_ice.jar:/
u01/app/oracle/product/10.2.0/db_1/jlib/share.jar:/u01/app/oracle/product/10.2.0/db_1/jlib/swingall-1_1_1.jar:/u01/app/oracle/product/10.2.0/db_1/jlib/srvmhas.jar:/u01/app/oracle/product/10.2.0/db_1/jlib/srvm.jar:/
u01/app/oracle/product/10.2.0/db_1/network/tools:/u01/app/oracle/product/10.2.0/db_1/jlib/ldapjclnt9.jar:/u01/app/oracle/product/10.2.0/db_1/jlib/ldapjclnt10.jar:/
u01/app/oracle/product/10.2.0/db_1/oui/jlib/OraInstaller.jar:/u01/app/oracle/product/10.2.0/db_1/lib/xmlparserv2.jar oracle.net.ca.NetCA /orahome /u01/app/oracle/product/10.2.0/db_1 /orahnam OraDb10g_home1 /instype typical /inscomp client,
oraclenet,javavm,server,ano /insprtcl tcp /cfg local /authadp NO_VALUE /nodeinfo NO_VALUE /responseFile /
u01/app/oracle/product/10.2.0/db_1/network/install/netca_typ.rsp
Configuration assistant "Oracle Net Configuration Assistant" was canceled.
The "/u01/app/oracle/product/10.2.0/db_1/cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled.
This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.

865231 wrote:
I am installing oracle 10g on Redhat 64bit (VM ware). In the middle it gives some error oracle Net services cancelled. Please see the error message below and advise.
Configuration assistant "Oracle Net Configuration Assistant" was canceled.
The "/u01/app/oracle/product/10.2.0/db_1/cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled.
This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.
Output generated from configuration assistant "Oracle Net Configuration Assistant":
Command = /u01/app/oracle/product/10.2.0/db_1/jdk/jre//bin/java -Duser.dir=/u01/app/oracle/product/10.2.0/db_1/network/jlib -classpath /u01/app/oracle/product/10.2.0/db_1/jdk/jre//lib/i18n.jar:/u01/app/oracle/product/10.2.0/db_1/jdk/jre//lib/rt.jar:/
u01/app/oracle/product/10.2.0/db_1/jlib/ewt3.jar:/u01/app/oracle/product/10.2.0/db_1/jlib/ewtcompat-3_3_15.jar:/u01/app/oracle/product/10.2.0/db_1/jlib/netcfg.jar:/u01/app/oracle/product/10.2.0/db_1/network/jlib/netcam.jar:/
u01/app/oracle/product/10.2.0/db_1/network/jlib/netca.jar:/u01/app/oracle/product/10.2.0/db_1/jlib/help4.jar:/
u01/app/oracle/product/10.2.0/db_1/jlib/jewt4.jar:/u01/app/oracle/product/10.2.0/db_1/jlib/oracle_ice.jar:/
u01/app/oracle/product/10.2.0/db_1/jlib/share.jar:/u01/app/oracle/product/10.2.0/db_1/jlib/swingall-1_1_1.jar:/u01/app/oracle/product/10.2.0/db_1/jlib/srvmhas.jar:/u01/app/oracle/product/10.2.0/db_1/jlib/srvm.jar:/
u01/app/oracle/product/10.2.0/db_1/network/tools:/u01/app/oracle/product/10.2.0/db_1/jlib/ldapjclnt9.jar:/u01/app/oracle/product/10.2.0/db_1/jlib/ldapjclnt10.jar:/
u01/app/oracle/product/10.2.0/db_1/oui/jlib/OraInstaller.jar:/u01/app/oracle/product/10.2.0/db_1/lib/xmlparserv2.jar oracle.net.ca.NetCA /orahome /u01/app/oracle/product/10.2.0/db_1 /orahnam OraDb10g_home1 /instype typical /inscomp client,
oraclenet,javavm,server,ano /insprtcl tcp /cfg local /authadp NO_VALUE /nodeinfo NO_VALUE /responseFile /
u01/app/oracle/product/10.2.0/db_1/network/install/netca_typ.rsp
Configuration assistant "Oracle Net Configuration Assistant" was canceled.
The "/u01/app/oracle/product/10.2.0/db_1/cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled.
This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.I thought the error message gave the advice already:
The "/u01/app/oracle/product/10.2.0/db_1/cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled.
This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.Looks like you canceled the pop up to configure your tns files. No harm, your database created just fine, but probably didn't configure listener.ora, sqlnet.ora, and tnsnames.ora. Just run netca and finish the tns confiiguration.

Error while installing oracle 10g in redhat Server

Hi experts,
I installed Oracle 10g in RedHat Linux server. After the installation Oracle will work smoothly. After restarting the server we try to start the listener service manually but it is not starting. I configured listener.ora file using GUI interface and also set Oracle HOME and Oracle SID. But still it’s not starting.
when Try to start the listener the following error comes.
Tns-12537:TNS:Connection closed
Tns-12560:TNS:PROTOCOL ADAPTER ERROR
Tns-00507:TNS:Connection closed
Linux error 29:illegal Seek.
Please help me

Thanks for the answer it was helpful and i successfully started the oracle database.
and i am trying to import dump file to tha database by creating the new schema when i try this i used the command like
imp userid=username/password@servicename file=C:\filename.dmp fromuser=username touser=username but i got error as no such command.pls help

Error While Installing ORACLE 10g in Redhat Linux 5.0

Hi all,
Anybody please guide me regarding the posted error.
I'm trying to install ORACLE 10g in Redhat Linux 5.0 and finding error as "Exception in thread "main" java.lang.UnsatisfiedLinkError: /tmp/OraInstall2009-10-15_09-20-56PM/jre/1.4.2/lib/i386/libawt.so: libXp.so.6: cannot open shared object file: No such file or directory
at java.lang.ClassLoader$NativeLibrary.load(Native Method)
at java.lang.ClassLoader.loadLibrary0(Unknown Source)
at java.lang.ClassLoader.loadLibrary(Unknown Source)
at java.lang.Runtime.loadLibrary0(Unknown Source)
at java.lang.System.loadLibrary(Unknown Source)
at sun.security.action.LoadLibraryAction.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at sun.awt.NativeLibLoader.loadLibraries(Unknown Source)
at sun.awt.DebugHelper.<clinit>(Unknown Source)
at java.awt.Component.<clinit>(Unknown Source)
I tired a lot to sort it out but unable to resolve.So please tell me the possible ways.
I appreciate all types of clarifications...
Thanks in Advance
Sajeev George

Sajeevcmc wrote:
Hi,
Thanks for the reply.
Could you please tell me the rpm full name and where i can download the same?
Thanks in Advance
SAJEEV GEORGEYou need to have the following packages installed already before starting Oracle installation
http://download.oracle.com/docs/cd/B19306_01/install.102/b15669/pre_install.htm#sthref80
binutils-2.15.92.0.2-10.EL4
compat-db-4.1.25-9
control-center-2.8.0-12
gcc-3.4.3-9.EL4
gcc-c++-3.4.3-9.EL4
glibc-2.3.4-2
glibc-common-2.3.4-2
gnome-libs-1.4.1.2.90-44.1
libstdc++-3.4.3-9.EL4
libstdc++-devel-3.4.3-9.EL4
make-3.80-5
pdksh-5.2.14-30
sysstat-5.0.5-1
xscreensaver-4.18-5.rhel4.2
And from the following link, you can get the same list:
http://www.puschitz.com/InstallingOracle10g.shtml (Go to Checking Software Packages (RPMs))
And from my installation guide you can easily install Oracle on Linux by following step by step instruction
[Step by Step Installing Oracle Database 10g Release 2 on Linux (CentOS) and AUTOMATE the installation using Linux Shell Script|http://kamranagayev.wordpress.com/2009/05/01/step-by-step-installing-oracle-database-10g-release-2-on-linux-centos-and-automate-the-installation-using-linux-shell-script/]

Error while installing Oracle 10G Grid control in RHEL

I was installing Oracle 10G Grid control in RHEL. Got the following error. Any idea what this means and what is the remedy?
=======================================
Output generated from configuration assistant "Oracle Net Configuration Assistant":
/home/oracle/jre/1.1.8/bin/../bin/i686/native_threads/jre: relocation error: /home/oracle/jre/1.1.8/bin/../lib/i686/native_threads/libjava.so: symbol __libc_wait, version GLIBC_2.0 not defined in file libc.so.6 with link time reference
Configuration assistant "Oracle Net Configuration Assistant" failed
=======================================
regards,
Anjan

I saw this once but I forgot how I solved it. I believe that I made a softlink to the libc.so.6 from another libc. Have a look on Metalink, becauses I've got the idea for my solution there.
cu
Andreas

Error while installing oracle 10g grid on windows

hi all,
when i am installing oracle 10g grid i got the error that
"Configuration assistant "OMS Configuration" failed "
when i saw the log
it has been mentioned the failed to create repos user.
this is the out put of the log
[14-02-2008 11:51:55] Enter SYS user's password :
[14-02-2008 11:51:55]
[14-02-2008 11:51:55] Enter repository user password :
[14-02-2008 11:51:55]
[14-02-2008 11:51:55] Enter MetaLink user password :
[14-02-2008 11:51:55]
[14-02-2008 11:51:55] Getting temporary tablespace from database...
[14-02-2008 11:51:55] Found temporary tablespace: TEMP
[14-02-2008 11:51:55] Checking SYS Credentials ...
[14-02-2008 11:51:56] OK.
[14-02-2008 11:51:56] Checking DB Init Parameters ...
[14-02-2008 11:51:56] OK.
[14-02-2008 11:51:56] Checking for Repos User ...
[14-02-2008 11:51:56] Does not Exist.
[14-02-2008 11:51:56] Loading necessary DB objects ...
[14-02-2008 11:51:56] Checking DB Object (DBMS_SHARED_POOL , PACKAGE) ...
[14-02-2008 11:51:56] Done Loading necessary DB objects
[14-02-2008 11:51:56] Creating repos user ...
DECLARE
ERROR at line 1:
ORA-01119: error in creating database file
'E:\oraclegrid\oms10g\oradata\mgmt.dbf'
ORA-27040: file create error, unable to create file
OSD-04002: unable to open file
O/S-Error: (OS 3) The system cannot find the path specified.
ORA-06512: at line 44
[14-02-2008 11:51:57] Failed.
[14-02-2008 11:51:57] Repository Creation failed. Failed to create Repos User.
all users and everyone has full permission on this folder, i don't know why it is giving,
please any one help me out i am stuck in the middle of the installation
oracle 10g grid version is 10.1
please reply to this
Regards,
Veeresh S

this is the output what i get in oui:configuration assistants
Output generated from configuration assistant "OMS Configuration" (attempt 6):
Command = oracle.sysman.emcp.oms.OmsPlugIn -configureOms
Operation Stopping OPMN Processes is in progress.
Operation EM Deploying is in progress.
Operation Creating OMS Respository is in progress.
Configuration assistant "OMS Configuration" failed
The "E:\oraclegrid\agent10g\cfgtoollogs\configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.-------------------------------------------------------------------------------
when i saw this E:\oraclegrid\agent10g\cfgtoollogs\configToolFailedCommands file
the below 2 lines was mentioned in that file.
rem Copyright (c) 1999, 2006, Oracle. All rights reserved.
oracle.sysman.emcp.agent.AgentPlugIn
this below log i got in E:\oraclegrid\agent10g\cfgtoollogs\cfgfw\CfmLogger_2008-02-14_10-28-34-AM.log file
i have pasted last lines of the files.
INFO: oracle.sysman.top.oms:OmsPlugIn:Requested Configuration Step 0 have been completed with status=true
INFO: oracle.sysman.top.oms:deployOms:Already deployed, skipped.
INFO: oracle.sysman.top.oms:OmsPlugIn:Requested Configuration Step 1 have been completed with status=true
INFO: oracle.sysman.top.oms:OmsPlugIn:Requested Configuration Step 2 have been completed with status=true
INFO: oracle.sysman.top.oms:PerformSecureCommand:runCmd:Performing Command=E:\oraclegrid\oms10g\sysman\admin\emdrep\bin\RepManager.bat -connect (DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=A1MD04823)(PORT=1521)))(CONNECT_DATA=(SID=q))) -action drop -repos_user SYSMAN -output_file E:\oraclegrid\oms10g\sysman\log\emca_repos_drop12_19_36.log
INFO: oracle.sysman.top.oms:PerformSecureCommand:drain:Spaced passwords by=100 ms
INFO: oracle.sysman.top.oms:PerformSecureCommand:runCmd:E:\oraclegrid\oms10g\sysman\admin\emdrep\bin\RepManager.bat -connect (DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=A1MD04823)(PORT=1521)))(CONNECT_DATA=(SID=q))) -action drop -repos_user SYSMAN -output_file E:\oraclegrid\oms10g\sysman\log\emca_repos_drop12_19_36.log have completed with exitCode=0
INFO: oracle.sysman.top.oms:PerformSecureCommand:runCmd:Command Output stdout:
'Enter SYS user's password :
Getting temporary tablespace from database...
Found temporary tablespace: TEMP
Checking SYS Credentials ... OK.
Dropping the repository..
Quiescing DB ... Done.
Checking for Repos User ... Does not Exist.
Repos User does not exist ... Continuing with cleanup ...
Dropping Roles/Synonymns/Tablespaces ... Done.
Unquiescing DB ... Done.
Dropped Repository Successfully.
INFO: oracle.sysman.top.oms:PerformSecureCommand:runCmd:Command Output stderr:
''stty' is not recognized as an internal or external command,
operable program or batch file.
'stty' is not recognized as an internal or external command,
operable program or batch file.
INFO: oracle.sysman.top.oms:PerformSecureCommand:runCmd:Performing Command=E:\oraclegrid\oms10g\sysman\admin\emdrep\bin\RepManager.bat -connect (DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=A1MD04823)(PORT=1521)))(CONNECT_DATA=(SID=q))) -action create -repos_user SYSMAN -metalink_username NOTAVAILABLE_ -output_file E:\oraclegrid\oms10g\sysman\log\emca_repos_create12_19_38.log -ecm_datafile E:\oraclegrid\oms10g\oradata\mgmt_ecm_depot1.dbf -datafile E:\oraclegrid\oms10g\oradata\mgmt.dbf
INFO: oracle.sysman.top.oms:PerformSecureCommand:drain:Spaced passwords by=200 ms
INFO: oracle.sysman.top.oms:RepManager Create Repository Error = E:\oraclegrid\oms10g\sysman\admin\emdrep\bin\RepManager.bat -connect (DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=A1MD04823)(PORT=1521)))(CONNECT_DATA=(SID=q))) -action create -repos_user SYSMAN -metalink_username NOTAVAILABLE_ -output_file E:\oraclegrid\oms10g\sysman\log\emca_repos_create12_19_38.log -ecm_datafile E:\oraclegrid\oms10g\oradata\mgmt_ecm_depot1.dbf -datafile E:\oraclegrid\oms10g\oradata\mgmt.dbf . Please check the log file at 12
'Enter SYS user's password :
Enter repository user password :
Enter MetaLink user password :
Getting temporary tablespace from database...
Found temporary tablespace: TEMP
Checking SYS Credentials ... OK.
Checking DB Init Parameters ... OK.
Checking for Repos User ... Does not Exist.
Loading necessary DB objects ...
Checking DB Object (DBMS_SHARED_POOL , PACKAGE) ... Exists.
DBMS POOL package exists.
Done Loading necessary DB objects
Creating repos user ... Failed.
Repository Creation failed. Failed to create Repos User.
''stty' is not recognized as an internal or external command,
operable program or batch file.
'stty' is not recognized as an internal or external command,
operable program or batch file.
'stty' is not recognized as an internal or external command,
operable program or batch file.
'stty' is not recognized as an internal or external command,
operable program or batch file.
'stty' is not recognized as an internal or external command,
operable program or batch file.
'stty' is not recognized as an internal or external command,
operable program or batch file.
INFO: oracle.sysman.top.oms:PerformSecureCommand:runCmd:E:\oraclegrid\oms10g\sysman\admin\emdrep\bin\RepManager.bat -connect (DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=A1MD04823)(PORT=1521)))(CONNECT_DATA=(SID=q))) -action create -repos_user SYSMAN -metalink_username NOTAVAILABLE_ -output_file E:\oraclegrid\oms10g\sysman\log\emca_repos_create12_19_38.log -ecm_datafile E:\oraclegrid\oms10g\oradata\mgmt_ecm_depot1.dbf -datafile E:\oraclegrid\oms10g\oradata\mgmt.dbf have completed with exitCode=12
INFO: oracle.sysman.top.oms:PerformSecureCommand:runCmd:Command Output stdout:
'Enter SYS user's password :
Enter repository user password :
Enter MetaLink user password :
Getting temporary tablespace from database...
Found temporary tablespace: TEMP
Checking SYS Credentials ... OK.
Checking DB Init Parameters ... OK.
Checking for Repos User ... Does not Exist.
Loading necessary DB objects ...
Checking DB Object (DBMS_SHARED_POOL , PACKAGE) ... Exists.
DBMS POOL package exists.
Done Loading necessary DB objects
Creating repos user ... Failed.
Repository Creation failed. Failed to create Repos User.
INFO: oracle.sysman.top.oms:PerformSecureCommand:runCmd:Command Output stderr:
''stty' is not recognized as an internal or external command,
operable program or batch file.
'stty' is not recognized as an internal or external command,
operable program or batch file.
'stty' is not recognized as an internal or external command,
operable program or batch file.
'stty' is not recognized as an internal or external command,
operable program or batch file.
'stty' is not recognized as an internal or external command,
operable program or batch file.
'stty' is not recognized as an internal or external command,
operable program or batch file.
INFO: oracle.sysman.top.oms:RepManager Create Repository Error = 12. Please check the log file at E:\oraclegrid\oms10g\sysman\log\emca_repos_create12_19_38.log
WARNING: oracle.sysman.top.oms:EmcpPlug:startProcessing:Exception in runner=RepManager Create Repository Error = 12. Please check the log file at E:\oraclegrid\oms10g\sysman\log\emca_repos_create12_19_38.log
INFO: oracle.sysman.top.oms:EmcpPlug:invoke:Completed EmcpPlug invoke method on an aggregate=oracle.sysman.top.oms for Action=configuration in step=2:microstep=0
INFO: oracle.sysman.top.oms:Internal PlugIn for {Micro Step state:step:2:configuration in CfmAggregateInstance: oracle.sysman.top.oms:10.2.0.2.0:common:family=CFM:oh=E:\oraclegrid\oms10g:label=7} failed with an unhandled exception:
java.lang.Exception: RepManager Create Repository Error = 12. Please check the log file at E:\oraclegrid\oms10g\sysman\log\emca_repos_create12_19_38.log
     at oracle.sysman.emcp.util.EmcpPlug.startProcessing(EmcpPlug.java:389)
     at oracle.sysman.emcp.util.EmcpPlug.invoke(EmcpPlug.java:360)
     at oracle.sysman.emCfg.core.PerformMicroStep.runJavaClass(PerformMicroStep.java:509)
     at oracle.sysman.emCfg.core.PerformMicroStep.executeMicroStep(PerformMicroStep.java:121)
     at oracle.sysman.emCfg.core.ActionPerformer.performMicroStep(ActionPerformer.java:917)
     at oracle.sysman.emCfg.core.ActionPerformer$Performer.run(ActionPerformer.java:1038)
INFO: oracle.sysman.top.oms:The plug-in OMS Configuration has failed its perform method
INFO: OuiConfigVariables:IAction.perform() was called on {Action state:OUICA in CfmAggregateInstance: OuiConfigVariables:1.0.0.0.0:common:family=CFM:oh=E:\oraclegrid\oms10g:label=7}
INFO: Framework waiting for Action to complete at 12:19:41.469
INFO: CfwProgressMonitor:actionProgress:About to perform Action=OUICA Status=is running with ActionStep=0 stepIndex=0 microStep=0
INFO: OuiConfigVariables:About to execute plug-in OUI_CA
INFO: OuiConfigVariables:The plug-in OUI_CA is running
INFO: OuiConfigVariables:Launching CmdExec
INFO: OuiConfigVariables:ExitCode=0
INFO: OuiConfigVariables:The plug-in OUI_CA executed as attached=true in separate process with exitcode=0
INFO: OuiConfigVariables:The plug-in OUI_CA has successfully been performed
INFO: done waiting for Action from 12:19:41.469
INFO: Cfm.save() was called
INFO: Cfm.save(): 15 aggregate instances saved
please anyone help, i have given all details, i want to install this grid as soon as possible

Installing Oracle 10g throught console

Similar Messages

Maybe you are looking for