Installing oracle 11 forms and reports

Hi,
i wanted to install oracle forms and reports on a machine where only a Oracle client is installed. Is a weblogic server really required? what i wanted to do was just to migrate rdf reports which we are using with an oracle 6 runtime. Is that possible or do we have to make the reports new?
thanks,
Georg

Hi,
When you say that you want to install oracle 11g.x then Weblogic is manadatory.
check support matrix for specific verision of WLS support on your required Forms and Reports installation.
Regards,
Kal

Similar Messages

Problem installing Oracle forms and report in windows 7

I have a problem while installing Oracle forms and reports in windows 7 64 bit
The error is : [as] [ERROR] [] [oracle.as.provisioning] [tid: 20] [ecid: 0000IY5_e_EApIRMyYAhMG1BuDGr00000B,0] [[
oracle.as.provisioning.exception.ASProvWorkflowException: Error Executing workflow.
at oracle.as.provisioning.engine.WorkFlowExecutor._createDomain(WorkFlowExecutor.java:688)
at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:393)
at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
at oracle.as.install.classic.ca.standard.StandardWorkFlowExecutor.execute(StandardWorkFlowExecutor.java:65)
at oracle.as.install.classic.ca.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:26)
at oracle.as.install.classic.ca.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:61)
at oracle.as.install.classic.ca.ClassicConfigMain.doExecute(ClassicConfigMain.java:124)
at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:335)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:87)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:104)
at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:63)
at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:158)
at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:83)
at java.lang.Thread.run(Thread.java:619)
So I Google for it and found that this is version mismatch (May be I am wrong) and it tells that I have to install WLS - 10.3.2 with ofm_pfrd_win_11.1.1.2.0_64 (1 to 4)
But I am unable to get wls version 10.3.2.
For better understanding I am listing my installers :
(I) Windows 7 Ultimate 64 Bit
(II) (Oracle 11g) win64_11gR2_database (1 & 2)
(III) ofm_pfrd_win_11.1.1.2.0_64 (1 to 4)
(IV)wls1033_generic.jar , wls1033p_generic.jar , wls1035_generic.jar
(V)accessbridge-2_0_2-fcs-bin-b06
(VI)ofm_rcu_win32_11.1.1.2.1_disk1_1of1,ofm_rcu_win_11.1.1.3.1_disk1_1of1
(VII) ofm_wc_generic_11.1.1.5.0_disk1_1of1
(VIII)jdk-6u38-nb-7_2_1-windows-i586-ml , jdk-6u38-windows-x64
(IX) oepe-wls-indigo-installer-11.1.1.8.0.201110211138-10.3.6-win32
(X)wls1033_oepe111150_win32.exe
(XI)wls1035_win32.exe
(XII)wls1035_oepe111172_win64
(XIII)oepe-indigo-installer-12.1.1.0.1.201203120349-12.1.1-win64
After the installation while configure the forms reports, I am stuck while creating domain.
steps I follow is :
(i) Install Windows 7 Ultimate 64 Bit
(ii) (Oracle 11g) win64_11gR2_database (1 & 2)
(iii) wls1033_generic.jar
(iv) accessbridge-2_0_2-fcs-bin-b06
(v)ofm_rcu_win32_11.1.1.2.1_disk1_1of1
(vi) ofm_pfrd_win_11.1.1.2.0_64 (1 to 4)
Please any body help, for the installation of oracle forms and reports.
I have a formatted Windows 7 Ultimate
Where I have installed Adobe Acrobat Reader
IIS server from windows installer
Now I want to know the exact procedure so that i can run the forms and report in my machine.
This is my first installation of Oracle forms & Reports, so please do not pre assume about my understanding (Like "to install this he surely did this environment settings" )
Please specify all the steps
Furthermore if Another software I have to download then please tell me.
And I will be grateful if you specify the mistakes in my side.
Looking forward with anticipation.

Solved, Thank you

Help me install oracle form and report 9.0.4 on red hat AS 4 x86

i installed oracle database 10.0.2 on my red hat AS 4 x86 in /u01/app/oracle/product/10.0.2/db_1. Now i want to install oracle form and report 9.0.4 on my computer in /u02/app/oracle/product/9.0.4
The oracle installer checks for required packages. It will produce the following list of missing packeges:
Package gcc-3.2.3-20 is missing
Package compat-gcc-7.3-2.96.122 is missing
Package compat-gcc-c++-7.3-2.96.122 is missing
Package compat-libstdc++-7.3-2.96.122 is missing
Package compat-libstdc++-devel-7.3-2.96.122 is missing
Package setarch-1.3-1 is missing
Package sysstat-4.0.7 is missing
Package gnome-libs-1.4.1.2.90-34.1 is missing
Package libstdc++-3.2.3 is missing
Package compat-libstdc++-devel-7.3-2.96.122 is missing
Package compat-glibc-7.x-2.2.4.32.5 is missingbut i installed newer versions of them. so can i continue to install without missing packeges??? and how to install missing packages because they conflict with packages i installed.
i tried to continue installation without missing packages and have some errors:
"Error in invoking target 'agent' of makefile /u02/app/oracle/product/9.0.4/sysman/lib/ins_sysman.mk"
Error in invoking target 'install' of makefile /u02/app/oracle/product/9.0.4/sqlplus/lib/ins_sqlplus.mk"
Error in invoking target 'install' of makefile /u02/app/oracle/product/9.0.4/plsql/lib/ins_plsql.mk"
Error in invoking target 'relink' of makefile /u02/app/oracle/product/9.0.4/precomp/lib/ins_precomp.mk"
Error in invoking target 'install' of makefile /u02/app/oracle/product/9.0.4/webcache/lib/ins_calypso.mk"
Error in invoking target 'install' of makefile /u02/app/oracle/product/9.0.4/network/lib/ins_net_client.mk"
Error in invoking target 'webm-install'(or genm-install or gen-install) of makefile /u02/app/oracle/product/9.0.4/forms90/lib/ins_forms.mk"
Error in invoking target 'proxy install' (runm-install,server-install,cgi-install,cli-install,conv-install,qv-install) of makefile /u02/app/oracle/product/9.0.4/reports/lib/ins_reports.mk"
and error in Configuration Assistants:
"output generated from coniguration assistant "oracle net configuration assistant":/u01/app/oracle/jre/1.1.8/bin/.../bin/i686/native-threads/jre: relocation error
":/u01/app/oracle/jre/1.1.8/bin/.../bin/i686/native-threads/libjava.so: symbol_ _libc_wait, version Glibc -2.0 not defined in file libc.so.6 with link time refrence
Someone help me!!!
Thanks.

The requirements for installing 10.2.0 and 9.0.4 on RHEL4 differ - 9.0.4 is based on older versioned RSFs and require linking against older compatibility libraries.
The OUI may incorrectly complain if later versions of the required/pre-requisite packages really are installed - this should not be a problem functionally, however.
The latter errors you report, however (make, relocation error, glibc/symbol), are symptomatic of trying to link with/against incompatible gcc/glibc versions. Try installing the following additional compatibility files (appropriate for your architecture);
- http://oss.oracle.com/projects/compat-oracle/dist/files/RedHat/compat-oracle-rhel4-1.0-5.i386.rpm
- http://oss.oracle.com/projects/compat-oracle/dist/files/RedHat/compat-libcwait-2.1-1.i386.rpm
If you have not already done so, I suggest you create and use (i.e. source) separate environment definition files when working with each product/version environment. For 9.0.4, ensure that you specify environment variable LD_ASSUME_KERNEL=2.4.19 before installing 9.0.4 (or relinking).
If you have MetaLink access, refer also to Note.315832.1, Note.389811.1.
Message was edited by:
mychan

Hw to install oracle forms and reports 11g builder on windows machine

HI Guys
i need to install oracle forms and reports 11G builder on windows machine for devlopers.. do anybody know from where i can download them and install them on developers machine. if anybody know steps of them .. that will be great..
Regards,
Devender

Maybe this thread will help you: Re: Install Forms & Rpts 11.1.1.3 with WebLogic Server 10.3.3 on Win32

Install Oracle Forms and Reports 11g (11.1.1.4)

Dear Gurus,
I would like to install Oracle Forms and Reports 11g (11.1.1.4) on Windows 2012 Server. So could you please suggest me whether Windows 2012 is certified or not for installing Oracle Forms and Reports 11g (11.1.1.4) .
Thanks & Regards,
Satish Kumar Sadhu.

Hi Satish,
Forms 11.1.1.4 is not certified for Windows Server 2012. Further more, no 11g Forms release is actually certified by Oracle to run on Windows Server 2012.
I would use Windows Server 2008 and use Forms 11.1.2.1 (11gR2). 11gR2 is the best release from Oracle and will run much better than Forms 11.1.1.4.
For a peace of mind, you can check My Oracle Support - Certifications Tab and/or the published Certification Matrices below:
11gR1 Matrix (For releases 11.1.1.x): http://www.oracle.com/technetwork/middleware/downloads/fmw-11gr1certmatrix.xls
11gR2 Matrix (For releases 11.1.2.x): http://www.oracle.com/technetwork/developer-tools/forms/oracle-forms-11gr2certmatrix-519680.xls
Thanks,
Gavin

How to install oracle Forms and Report 10g in windows XP OS

How to install oracle Forms and Report 10g in windows XP OS. Already installed oracle Database 10g in my notebook.
It is working good.
please help me this issue.
please give the steps..............
Thanks
Rajeev

Hello Frank,
for development, you need to install Oracle Developer
Suite 10g. This includes Forms and Reports.this topic interests me too, because I've downloaded Developer Suite and Database (both for 10g) from Oracle website, installed them, but I couldn't connect to a database.
What should be done for me to create a database link and be able to connect locally, in my personal Desktop computer? (Not to a server)
Once it was told me here that I should download 10g Database - I did it, and installed it, but it didn't work. Later, some of my job partners said I should install them in a sequence - that is, 1st the Developer, and 2nd the Database. But it has failed too. And I don't know how to configure a database connection.
Best regards,

Install oracle forms and reports in ubuntu gusty gibbon

Hi,
Can anyone help me in installing oracle forms and reports on ubuntu. You can send me the link or email me.
Regards
Anup NAIR

Which version r u planning to install? 6i or 10g?
If you are planning for 10g , I think it is not supported by Oracle.
I found the below link which tells step by step process though you need to do your own research as well.
http://www.eckford.ca/Sympatico/htdocs/ODS_Install.html
Please let me know whether it worked or not.
I am also planning to install it on BOSS Linux.

How to install Oracle Form and Report 6i on existing database

Hi all please help me,
My system is rhel 3 (update 6). My question is how can i install Oracle form and report 6i on my machine, which is already have database 10g R2? I known i have to create two separate ORACLE_HOME. Since i already had database 10g R2, can i just go head install Oracle form and report 6i on separate ORACLE_HOME? or i need to remove database 10g R2 first, and then install Oracle form and report 6i
Thanks in advances

<< Why Forms/Reports 6i and not something later, BTW? >>
Presumably he has to support a client/server application. They haven't all disappeared overnight, despite what Oracle tell everyone.

Installing oracle forms and reports 6i

Hi
If I install oracle forms and reports first on win xp pro, then will I be able to install database after that using the oracle installer from the CD?
When installing oracle forms and reports 6i, I get a screen says which product u want to install?
1. Forms builder
2. Forms server
3. Report builder
4. Report server
Whats the 2 and 4 used for? do I have to give the same oracle_home path for 1 and 2?

Uninstall Oracle client from your PC and then install Forms .It will work.
Regards
Saroj.

Instalation Oracle Forms and Reports 6i

Hi
Where can I a tutorial about instalation of the Oracle forms and reports 6i ?
Tia
using 9.2.02

Its just executingbthe setup.exe and following the dialogs. Make sure you choose a separate Oracle-Home.

Error while configuring Oracle Forms and Reports 11g

Hi,
I have been trying to install oracle forms and reports from last 5 days.
I have installed weblogic server 10.3.6
and trying to install forms and reports 11.1.2
Earlier while installing I did not configure it as it was giving some error so I just installed it but not again I have to configure it and I am getting the same error its as follows:-
INST-07286: Specified Oracle Middleware home location does not have version 10.3.5.0 of WebLogic server. If the version is incorrect then configuring with the Weblogic server will fail.
Provide a Oracle Middleware home location which contains WebLogic server with version 10.3.5.0 or upgrade the Weblogic server to 10.3.5.0 and restart the install.
I have latest version of WLS but still its not accepting.
Please help me guys , struggled a lot for it...What shall I do?

Thanks Guys for you suggestions I came one step foreward
For this I downloaded the exact version 10.3.5 and problem got resolved.
But now getting new problem at the end of configuration part on Creating Domain, process is getting stuck. I waited for more than an hour but still progress is 0%.
Edited by: 966714 on Oct 26, 2012 7:25 PM

Is Windows 7 64 bit support for Oracle Forms and Reports 6i version

Hi All,
Greentings!
Its urgent requirement from customer to Install Oracle Forms and Reports 6i Client software in Windows 7 64 bit OS.
Can any one please help me to download and Install the same. It would be great if you send me the download link and steps to Install.
Many thanks in advance!
Kind Regards,
Mohan

That is a very very old product. It does not look like it is certified on that OS.
Forms 6i Documentation
http://www.oracle.com/technetwork/documentation/6i-forms-084462.html
From
http://download.oracle.com/otn_hosted_doc/forms/forms/A73154_01.pdf
1.2.1.2 Operating System
This version of Forms Developer requires Microsoft Windows. Specifically, one of the following versions:
Windows 95 (any version)
Windows 98 (any version)
Windows NT (Service Pack 5 or later)
For certification you should check with Middleware Certification (MOSC)

Oracle Forms and Reports 10gR2 for Windows Server 2008 (64bit)

Hi!
I need to install Oracle Forms and Reports 10gR2 in a windows server 2008 64 bit machine. But I cannot find the installer of it. Is there a way to do it?
Thanks...

I need to install Oracle Forms and Reports 10gR2 in a windows server 2008 64 bit machine.Be aware that Oracle Forms and Reports 10gR2 (AS 10.1.2.0.2) is not certified for windows server 2008, as from Oracle Certification Matrices

Which oracle forms and reports should be installed on oracle 9i on redhat9

i have installed oracle 9i database on red hat 9 kernel 2.4.20
now i want to use oracle forms and reports.
so these are my questions
1) which version of forms and reports to use where to get those
2) how to install and get working
3) i already tried developer suite 10g(9.0.4)but it said that it was possible till oracle 8.1.7 database.then i tried 10 R2 which says it can only be installed on linux 3 and 4 .so what to do.
plz help thnks in advance
Message was edited by:
user546535

i already tried developer suite 10g(9.0.4)but it said that it was possible till oracle 8.1.7 databaseDon't know what it means, I already used 9.0.4 with 9.2 DB, and I had no problems
then i tried 10 R2 which says it can only be installed on linux 3 and 4If this is referred to prerequisites checking, then you can bypass it by
$ ./runInstaller -ignoreSysPrereqs
then you shouldn't have big problems.

Oracle Forms and Reports Installation - Creating domain failed

I installed the weblogic 10.3.6 (Oracle WebLogic Server 11gR1 (10.3.6) + Coherence + OEPE - Package Installer) in my Microsoft Windows(32-bit JVM) system first.
But there was an error occorred when the package of forms and reports (Oracle Forms and Reports 11gR2 (11.1.2.2.0)) was installing.
Please find the following error message for your reference.
Do you have any idea? Please kindly advise.
Thanks a lot!
2014-04-02 14:11:14,099 INFO [main] com.oracle.cie.domain.script.ScriptExecutor - read template from "C:/Users/GZ/AppData/Local/Temp//tmp1396419069239wls.jar"
2014-04-02 14:11:16,185 INFO [main] com.oracle.cie.domain.template.catalog.impl.ComponentsXMLConverter - C:\Oracle\Middleware\wlserver_10.3\common\lib\components.xml does not contain component elements and will be skipped
2014-04-02 14:11:17,556 INFO [main] com.oracle.cie.domain.WLSTemplateBuilder - No config-groups.xml found in template
2014-04-02 14:11:17,556 INFO [main] com.oracle.cie.domain.WLSTemplateBuilder - No template-database.xml found in template
2014-04-02 14:11:18,205 INFO [main] com.oracle.cie.domain.script.ScriptExecutor - succeed: read template from "C:/Users/GZ/AppData/Local/Temp//tmp1396419069239wls.jar"
2014-04-02 14:11:18,477 INFO [main] com.oracle.cie.domain.script.ScriptExecutor - set config option ServerStartMode to "prod"
2014-04-02 14:11:18,477 INFO [main] com.oracle.cie.domain.script.ScriptExecutor - succeed: set config option ServerStartMode to "prod"
2014-04-02 14:11:18,490 INFO [main] com.oracle.cie.domain.script.ScriptExecutor - create Machine "PC-42A26D.GZAD.MSAD.LOCAL" as obj0
2014-04-02 14:11:18,604 INFO [main] com.oracle.cie.domain.script.ScriptExecutor - succeed: create Machine "PC-42A26D.GZAD.MSAD.LOCAL" as obj0
2014-04-02 14:11:18,612 INFO [main] com.oracle.cie.domain.script.ScriptExecutor - find Server "AdminServer" as obj1
2014-04-02 14:11:18,652 INFO [main] com.oracle.cie.domain.script.ScriptExecutor - succeed: find Server "AdminServer" as obj1
2014-04-02 14:11:18,698 INFO [main] com.oracle.cie.domain.script.ScriptExecutor - set obj1 attribute Machine to "PC-42A26D.GZAD.MSAD.LOCAL"
2014-04-02 14:11:18,705 INFO [main] com.oracle.cie.domain.script.ScriptExecutor - succeed: set obj1 attribute Machine to "PC-42A26D.GZAD.MSAD.LOCAL"
2014-04-02 14:11:18,706 INFO [main] com.oracle.cie.domain.script.ScriptExecutor - set obj1 attribute ListenPort to "7002"
2014-04-02 14:11:18,716 INFO [main] com.oracle.cie.domain.script.ScriptExecutor - succeed: set obj1 attribute ListenPort to "7002"
2014-04-02 14:11:18,716 INFO [main] com.oracle.cie.domain.script.ScriptExecutor - create Server!SSL "AdminServer!AdminServer" as obj2
2014-04-02 14:11:18,724 INFO [main] com.oracle.cie.domain.script.ScriptExecutor - succeed: create Server!SSL "AdminServer!AdminServer" as obj2
2014-04-02 14:11:18,735 INFO [main] com.oracle.cie.domain.script.ScriptExecutor - set obj2 attribute HostnameVerificationIgnored to "true"
2014-04-02 14:11:18,739 INFO [main] com.oracle.cie.domain.script.ScriptExecutor - succeed: set obj2 attribute HostnameVerificationIgnored to "true"
2014-04-02 14:11:18,739 INFO [main] com.oracle.cie.domain.script.ScriptExecutor - find User "weblogic" as obj3
2014-04-02 14:11:18,755 INFO [main] com.oracle.cie.domain.script.ScriptExecutor - succeed: find User "weblogic" as obj3
2014-04-02 14:11:18,755 INFO [main] com.oracle.cie.domain.script.ScriptExecutor - delete obj3
2014-04-02 14:11:18,763 INFO [main] com.oracle.cie.domain.script.ScriptExecutor - succeed: delete obj3
2014-04-02 14:11:18,764 INFO [main] com.oracle.cie.domain.script.ScriptExecutor - create User "weblogic" as obj4
2014-04-02 14:11:18,768 INFO [main] com.oracle.cie.domain.script.ScriptExecutor - succeed: create User "weblogic" as obj4
2014-04-02 14:11:18,771 INFO [main] com.oracle.cie.domain.script.ScriptExecutor - set obj1 attribute PeriodLength to "200000"
2014-04-02 14:11:18,807 INFO [main] com.oracle.cie.domain.script.ScriptExecutor - succeed: set obj1 attribute PeriodLength to "200000"
2014-04-02 14:11:18,807 INFO [main] com.oracle.cie.domain.script.ScriptExecutor - set obj1 attribute IdlePeriodsUntilTimeout to "20"
2014-04-02 14:11:18,815 INFO [main] com.oracle.cie.domain.script.ScriptExecutor - succeed: set obj1 attribute IdlePeriodsUntilTimeout to "20"
2014-04-02 14:11:18,815 INFO [main] com.oracle.cie.domain.script.ScriptExecutor - set obj1 attribute DGCIdlePeriodsUntilTimeout to "21"
2014-04-02 14:11:18,821 INFO [main] com.oracle.cie.domain.script.ScriptExecutor - succeed: set obj1 attribute DGCIdlePeriodsUntilTimeout to "21"
2014-04-02 14:11:18,822 INFO [main] com.oracle.cie.domain.script.ScriptExecutor - set obj1 attribute IdleConnectionTimeout to "1000"
2014-04-02 14:11:18,830 INFO [main] com.oracle.cie.domain.script.ScriptExecutor - succeed: set obj1 attribute IdleConnectionTimeout to "1000"
2014-04-02 14:11:18,833 INFO [main] com.oracle.cie.domain.script.ScriptExecutor - set obj4 attribute Password to "********"
2014-04-02 14:11:18,837 INFO [main] com.oracle.cie.domain.script.ScriptExecutor - succeed: set obj4 attribute Password to "********"
2014-04-02 14:11:18,837 INFO [main] com.oracle.cie.domain.script.ScriptExecutor - set config option OverwriteDomain to "true"
2014-04-02 14:11:18,837 INFO [main] com.oracle.cie.domain.script.ScriptExecutor - succeed: set config option OverwriteDomain to "true"
2014-04-02 14:11:18,837 INFO [main] com.oracle.cie.domain.script.ScriptExecutor - set config option JavaHome to "C:/Oracle/Middleware/jdk160_29"
2014-04-02 14:11:18,837 INFO [main] com.oracle.cie.domain.script.ScriptExecutor - succeed: set config option JavaHome to "C:/Oracle/Middleware/jdk160_29"
2014-04-02 14:11:18,948 INFO [main] com.oracle.cie.domain.script.ScriptExecutor - validateConfig "KeyStorePasswords"
2014-04-02 14:11:18,953 INFO [main] com.oracle.cie.domain.script.ScriptExecutor - succeed: validateConfig "KeyStorePasswords"
2014-04-02 14:11:18,954 INFO [main] com.oracle.cie.domain.script.ScriptExecutor - write Domain to "C:/Oracle/Middleware/user_projects/domains/base_domain"
2014-04-02 14:11:19,441 INFO [main] com.oracle.cie.domain.DomainChecker - ListenPort internal Validation result= [null]
2014-04-02 14:11:19,441 INFO [main] com.oracle.cie.domain.DomainChecker - ListenPort external Validation result= [null]
2014-04-02 14:11:21,609 INFO [Thread-1] com.oracle.cie.domain.StartMenu - Creating start menu program=C:\Oracle\Middleware\user_projects\domains\base_domain\bin\startWebLogic.cmd link=Start Admin Server for Weblogic Server Domain
2014-04-02 14:11:21,659 INFO [Thread-1] com.oracle.cie.domain.StartMenu - Creating start menu program=C:\Oracle\Middleware\user_projects\domains\base_domain\bin\stopWebLogic.cmd link=Stop Admin Server
2014-04-02 14:11:21,667 INFO [Thread-1] com.oracle.cie.domain.StartMenu - Creating start menu program=C:\Windows\system32\rundll32.exe link=Admin Server Console
2014-04-02 14:11:21,759 INFO [Thread-1] com.oracle.cie.domain.DomainRegistryWrapper - need to initialize domainRegistrydocument object
2014-04-02 14:11:21,777 INFO [Thread-1] com.oracle.cie.domain.DomainGenerator - Domain Generation Successful!
2014-04-02 14:11:21,783 INFO [main] com.oracle.cie.domain.script.ScriptExecutor - succeed: write Domain to "C:/Oracle/Middleware/user_projects/domains/base_domain"
2014-04-02 14:11:21,784 INFO [main] com.oracle.cie.domain.script.ScriptExecutor - close template
2014-04-02 14:11:21,784 INFO [main] com.oracle.cie.domain.script.ScriptExecutor - succeed: close template
2014-04-02 14:11:21,784 INFO [main] com.oracle.cie.domain.script.ScriptExecutor - read domain from "C:/Oracle/Middleware/user_projects/domains/base_domain"
2014-04-02 14:11:21,967 INFO [main] com.oracle.cie.domain.script.ScriptExecutor - succeed: read domain from "C:/Oracle/Middleware/user_projects/domains/base_domain"
2014-04-02 14:11:21,967 INFO [main] com.oracle.cie.domain.script.ScriptExecutor - add template C:/Oracle/Middleware/oracle_common/common/templates/applications/jrf_template_11.1.1.jar to domain
2014-04-02 14:11:22,011 WARN [main] com.oracle.cie.domain.template.dependency.TemplateSelectionTarget - Catalog does not have matching template for location C:\Users\GZ\AppData\Local\Temp\tmp1396419069239wls.jar
2014-04-02 14:11:22,071 INFO [main] com.oracle.cie.domain.WLSTemplateBuilder - No template-database.xml found in template
2014-04-02 14:11:22,100 INFO [main] com.oracle.cie.domain.WLSTemplateBuilder - No template-database.xml found in template
2014-04-02 14:11:22,101 ERROR [main] com.oracle.cie.domain.ConfigGroupsEngine$ConfigTopology - Multiple definitions of server-group BI-ADF-ADMIN-SVR are not allowed
2014-04-02 14:11:22,101 INFO [main] com.oracle.cie.domain.script.ScriptExecutor - fail: add template C:/Oracle/Middleware/oracle_common/common/templates/applications/jrf_template_11.1.1.jar to domain
2014-04-02 14:11:22,101 ERROR [main] com.oracle.cie.domain.script.ScriptExecutor - fail: add template C:/Oracle/Middleware/oracle_common/common/templates/applications/jrf_template_11.1.1.jar to domain
com.oracle.cie.domain.ConfigGroupsException: Multiple definitions of server-group BI-ADF-ADMIN-SVR are not allowed
at com.oracle.cie.domain.ConfigGroupsEngine$ConfigTopology.merge(ConfigGroupsEngine.java:2762)
at com.oracle.cie.domain.ConfigGroupsEngine.mergeTopology(ConfigGroupsEngine.java:551)
at com.oracle.cie.domain.ConfigGroupsEngine.merge(ConfigGroupsEngine.java:479)
at com.oracle.cie.domain.AbstractTemplate.addConfigGroups(AbstractTemplate.java:314)
at com.oracle.cie.domain.script.ScriptExecutor.addTemplate(ScriptExecutor.java:605)
at com.oracle.cie.domain.script.jython.WLScriptContext.addTemplate(WLScriptContext.java:416)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.python.core.PyReflectedFunction.__call__(Unknown Source)
at org.python.core.PyMethod.__call__(Unknown Source)
at org.python.core.PyObject.__call__(Unknown Source)
at org.python.core.PyInstance.invoke(Unknown Source)
at org.python.pycode._pyx3.addTemplate$20(C:\Users\GZ\AppData\Local\Temp\WLSTOfflineIni364664194239939514.py:89)
at org.python.pycode._pyx3.call_function(C:\Users\GZ\AppData\Local\Temp\WLSTOfflineIni364664194239939514.py)
at org.python.core.PyTableCode.call(Unknown Source)
at org.python.core.PyTableCode.call(Unknown Source)
at org.python.core.PyFunction.__call__(Unknown Source)
at org.python.pycode._pyx15.f$0(C:\Users\GZ\AppData\Local\Temp\tmp1396419069304.py:42)
at org.python.pycode._pyx15.call_function(C:\Users\GZ\AppData\Local\Temp\tmp1396419069304.py)
at org.python.core.PyTableCode.call(Unknown Source)
at org.python.core.PyCode.call(Unknown Source)
at org.python.core.Py.runCode(Unknown Source)
at org.python.util.PythonInterpreter.execfile(Unknown Source)
at weblogic.management.scripting.WLST.main(WLST.java:139)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at weblogic.WLST.main(WLST.java:29)

hi user ...
on windows there are some steps in front of installation and configuration.
1) cleare the Windows Env (Path .. Programme x86 )
no Blank in Path and so on
2) insert into your local host file your server and IP Adress
3) in Windows 32 setup of WLS is JDK included so you don't have to install the jdk in front of WLS
4) verify if you are using the right installation medium (jdk 32 bit, wls 32 bit , fmw 32 bit
in your OraInventory/logs directory is a *.out file for your installation please can you put this file in the forum
is there a nodemanager up and running (if so please stop)
Jan-Peter

Migrating Oracle forms and reports from 6i to 10g Application server on Uni

HI Guys,
We are migrating from Oracle forms and reports 6i to 10g.
We will be having application server on Unix box.
I understand following will be the changes i will have to do in this respect -
1. Fonts are to be revisited only Java fonts are supported.
2. Obsolete items, function calls, triggers are to be removed.
My question is since this application can be cross platform application,
Can anyone provide me with changes that I will have to do with configuration files like -
1. Formsweb.cfg,
2. forms.conf
3. default.env
4. registry.dat
Keeping in mind that the application server will be on unix box.
Thanks,
Av.

Java fonts are only supported for the Forms version.
You can use your own fonts for Reports however, there is some legwork to do this. I know because I just went through it.
If you will only being using the PDF output (which for me replaced the Preview mode that existed in 6i), then you have to install the TTF for the missing font, an AFM (use the ttf2pt1 utility to generate the AFM file, but make sure you remove the AFM extension when moving it to Unix). You'll want to use the PDF Subset in the uifont.ali (which exists under the ORACLE_HOME/guicommon/tk/admin directory and add the line underneath the PDF Subset "Font Family Name"="TTF Font Name" The font family name is found when you open the AFM file in textpad or wordpad for the font you generated. This is what you enter. The TTF Font Name is the name the TTF font. You'll have to restart Reports Server after this.
If printing to the printer directly is an option you must have, I will tell you it does not work in Linux right now. You can print to the printer but if the font doesn't exist on the internal memory of the printer, it won't work. There are 3rd party utilities like ORARRP and PDFPrint that can take care of this but, each has its own limitations. The one thing I found with ORARRP is if you generate a Report with an RRPA file extension and open it on Windows, it works great, the printer dialog comes up asking you what printer you want to print too. However, if you call this in Linux/Unix with the filename, it brings it up in the web browser but doesn't prompt you for your printer to print too automatically. So, for me, it's a show stopper. My only other option is to install the fonts on the printer that are missing.
As for the files you want to change, you'll obviously have to make changes to the formsweb.cfg, default.env, forms.conf. I have to modify the reports.sh for some PL/SQL attached libraries to make sure it picks them up. I did have to modify Registry.dat.
There is alot of work but mainly forms wasn't too bad, unless you had fonts that weren't supported. Usually there is another font that you can use to replace the old one but you have to know which fonts exists on the server and try all the keys on the keyboard to find the corresponding keystroke.
Hope this helps.
Chris

Installing oracle 11 forms and reports

Similar Messages

Maybe you are looking for