Installing Oracle 8i client tools on Windows 2K Advanced Server SP2

I am having issues with installing Oracle 8i client tools on W2K Advanced Server SP2. The CD I have is labeled Oracle 8i Enterprise Edition, Release 3 (8.1.7) Win NT/2000 CSI# 2224188. The error message I get is that a dependency exist on having ORACLE.SWD.JRE 1.1.8.10.0 installed and the universal installer cant find it. The disk has a folder named ORACL.SWD.JRE with a subfolder named 1.1.7.30 which leads me to believe that the version of the file that shipped with this media is version 1.1.7.30.
Questions:
1. Why would Larry ship a CD with the wrong version of a file...just venting.
2. Where do I get the correct version?
3. How do I install it?
Any help would be appreciated.
Kurt

Oracle8i on PIV
If you have Pentium IV do following: find file symcjit.dll file in the oracle installation folder and rename it to symcjit.old.
try to run setup.exe located in the install/win32 folder.
Oracle9i on W2K
Install service pack 2 or higher
Virtual memory between 800 and 900 MB ( Recommended )
if for any cause setup.exe does not make anything,
try to make click on autorun.exe
Joel P�rez

Similar Messages

Can install Oracle 10g release 2 on Windows 2008 R2 Server 64-bit machine

Hi All,
Can we install Oracle 10g Release 2 on Windows 2008 Server R2 for 64-bit machine? If yes then is there any patche requirement for this, So suggest me.
Regards,
Rizi

Hi;
Can we install Oracle 10g Release 2 on Windows 2008 Server R2 for 64-bit machine? If yes then is there any patche requirement for this, So suggest me.Yes you can but you must use 10.2.0.5.0 version. Pelase check below note:
How to Install Oracle 10.2.0.5 on MS Windows 7 / Windows 2008R2 [ID 1173433.1]
Regard
Helios

Oracle 8.1.7 on Windows 2000 Advanced Server

We have a client that is running the 8.1.7 server on a Windows 2000 Advanced Server. The database service is set to start automatically, but every time the server reboots the database service says that it is started, but when we try to access the database we get a message that says "Oracle not available". After we go into the DBA Studio and manually open the database everything works fine (until we have to reboot again). Are there any known issues with 8.1.7 and 2000 Advanced Server? Is there some configuration setting that we could be missing that will get the database to automatically start like it is supposed to?
Thanks in advance for any help,
David L. England,
Software Engineer, AlphaCorp

They are using a static IP and the network was all setup before we installed Oracle. I think we have the local System account starting the service. Is the right to start the database something we need to assign to the local System account or should we be using a different account?
I don't remember ever having to go into the service and change anything on any system we have setup before, but this is the first 2000 Advanced Server we have done.
Thanks,
David

Problems Installing Oracle 9i Client

I got problems while I'm trying to Install Oracle 9i Client on a Windows 98 PC.
When I run Setup.exe file, nothing happens, I cant See Setup dialogs.
Somebody knows what is happening.
I appreciate some help
Best regards

This was posted by someone else sometime ago. I'm posting it again for your reference. hope this helps.
raja
You must read carefully the following steps here. If you previously installed any Oracle's products on your machine, I strongly recommend you to clean up thoroughly before install the new products.
================================================================
Uninstallation
The easiest way to remove ALL traces of Oracle software, for an 8i installation, is:
(1) Using regedit, remove the key \\HKEY_LOCAL_MACHINE\\SOFTWARE\ORACLE.
(2) Remove all the Oracle services (usually called Ora-something) from \\HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services.
(3) Go to the ORACLE_HOME directory (usually C:\Oracle\Ora81). Go to the BIN directory beneath this. Rename the file OCIW32.DLL to something like OCIW32.OLD.
(4) Reboot your box.
(5) Once you have logged on again, delete the directories C:\Program Files\Oracle and C:\Oracle.
(6) Right-click on My Computer, select Properties->Environment. Edit the environmental variable PATH to remove all refernces to files in the two directories you have just deleted.
(7) Remove the Oracle folders from your Start menu.
*** Obviously, using regedit on your machine always entails risks, and I won't be held responsible if you end up trashing your system. However, the above procedure is one I have used many times with complete success. You have been warned! ;) ***
As to logging on, the "standard" Oracle accounts are:
SYS/change_on_install (SYSDBA - database owner)
SYSTEM/manager (Owns various VIEWs and utility PACKAGEs)
and (optionally):
SCOTT/tiger (Training account containing some sample tables)
If you're using PO8i on the local machine, you shouldn't need to worry about setting up NET*8 (Oracle's networking protocols)
=================================================================
Windows 95 and 98
This will remove all Oracle products, Oracle services, and Oracle registry entries from your computer.
Complete the following steps to create a Clean Machine. Backup any relevant databases before proceeding!
On Windows 95 and Windows 98:
1. Ensure you shutdown your Oracle. Right click on the Oracle Icon in the toolbar and click on the shutdown option.
2. Un-install all your Oracle products if possible. Use universal installer to do that. Ignore this step if you dont have universal installer on your machine.
3. In regedit, go to HKEY_LOCAL_MACHINE\SOFTWARE\ORACLE.
4. Delete the ORACLE key.
5. Edit your AUTOEXEC.BAT file and remove your %ORACLE_HOME%\bin and JRE paths from the path setting.
6. From the Windows Explorer (or from the command prompt), delete the Oracle directory (Oracle Base).
7. Delete <system_drive>:\Program Files\Oracle (from the Windows NT Explorer or from the command prompt).
8. Delete Icons from <system_drive>: \Windows\Start Menu\Programs\Oracle - <HOME> and <system_drive>:\Windows\StartMenu\Programs\Oracle Installation Products. Where <HOME> is the previous HOME name.
9. Reboot your computer.
On Windows NT:
1. Ensure you are logged in as a user with Administrator privileges.
2. Stop all Oracle Services through Control Panel Services. Use universal installer to un-install your Oracle products. Ignore un-install if you dont have universal installer on your machine.
3. Using regedit (at the command prompt, type regedit), go to HKEY_LOCAL_MACHINE\SOFTWARE\ORACLE and delete the ORACLE key.
4. Open HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services, and remove all keys under HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services that begin with ORACLE.
5. Open HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\EventLog\Application, and remove all keys under HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\EventLog\Application that begin with ORACLE.
6. Close regedit.
7. From the Control Panel, open System.
8. If JRE was installed by Oracle, remove the %ORACLE_HOME%\BIN path and the JRE path. For example, you may see a path similar to this one: C:\ORACLE\ORAxx\BIN;G: \Program Files\Oracle\jre\1.1.7\bin. Go to Start > Control Panel > System > Environment tab. Click on the system variable path and modify the path.
9. Delete Icons from <system_drive>:\Winnt\Profiles\All Users\Start Menu\Programs\Oracle - <HOME> and <system_drive>:\Winnt\Profiles\All Users\Start Menu\Programs\Oracle Installation Products. Where <HOME> is the previous HOME name.
10. Delete <system_drive>:\Program Files\Oracle (from the Windows NT Explorer or from the command prompt).
11. Reboot your computer.
12. Delete all ORACLE_BASE directories (You can find the Oracle homes listed in HKEY_LOCAL_MACHINE\SOFTWARE\ORACLE\ORACLE_HOMES).
================================================================
Doc ID:
Note:131299.1
Subject:
Oracle Installer 8.1.X Hangs on Machines with Pentium 4
Processors
Type:
ALERT
Status:
PUBLISHED
Content
Type:
TEXT/PLAIN
Creation
Date:
02-JAN-2001
Last
Revision Date:
18-APR-2001
This alert was modified 16-January-2001 by specifying specific
Oracle Universal
Installer Versions in the the Versions Affected section.
Oracle Universal Installer (OUI) for 8.1.x Hangs on Machines
with Pentium 4
Processors
~~~~~~~~~~~~~~~~~~
Versions Affected
~~~~~~~~~~~~~~~~~
Oracle 8.1.5
============
Oracle Universal Installer 1.6.0.9.0
Oracle 8.1.6
=============
Oracle Universal Installer 1.7.0.19.0
Oracle 8.1.7
==============
Oracle Universal Installer 1.7.1.9.0
Platforms Affected
~~~~~~~~~~~~~~~~~~
Any platform that uses the Intel Pentium 4 processor, with the
Sun JRE
and Symmantec JIT will encounter this problem. Windows NT,
Windows 2000
and NetWare platforms are confirmed to be affected.
Description
~~~~~~~~~~~
When installing Oracle Products with the Oracle Universal
Installer (8.1.x)
on machines that use the Sun JRE and Symmantec JIT, the
installer hangs.
Specifically for the Windows platform, the following version
of the Symmantec
JIT or earlier will encounter the failure:
Symantec Java! JustInTime Compiler Version 3.10.107 for JDK
1.2.
Details regarding this issue can be found at:
http://developer.intel.com/design/processor/future/manuals/knowni ssue.htm
How to determine if you have Symmantec Java for JDK 1.2:
1. Select the file "symcjit.dll" and right click on it.
2. Select Properties, then the Version tab.
3. Under Microsoft Windows*, the properties of the DLL are:
"Symantec Java! JustInTime Compiler Version 3.10.107 for
JDK 1.2 Copyright (C)
1996-99 Symantec Corporation Dynamic Link Library file".
DLLs older than this will also not work. "
Likelihood of Occurrence
~~~~~~~~~~~~~~~~~~~~~~~~
Any platform that uses the Intel Pentium 4 processor, with the
Sun JRE
and Symmantec JIT will encounter this problem. Windows NT,
Windows 2000 and NetWare platforms are confirmed to be
affected.
Possible Symptoms
~~~~~~~~~~~~~~~~~
The failure typically is that the affected application simply
terminates.
Workaround
~~~~~~~~~~
Not only will OUI be affected by this bug, most of the
post-install
configuration tools will also be affected. Running these
tools with "-nojit"
specified will avoid the hang, but it is not simple to specify
"-nojit" for
some of the products.
The following workaround works for the Windows operating
system:
a. Copy only the install directory from the CD to the hard
disk ,say, e:\temp.
b. Open oraparam.ini and make the following modifications
(Assuming CD
drive is f:)
* Change the "SOURCE=" line to use the full path to the CD
instead of a
relative path. (i.e., SOURCE=f:\stage\products.jar)
* Change the "JRE_LOCATION" line to use the full path to the
CD instead of a
relative path. (i.e.,
JRE_LOCATION=f:\stage\Components\oracle\swd\jre\1.1.7\1\DataFiles
\Expanded)
* Change the "OUI_LOCATION" line to use the full path to the
CD instead of a
relative path. (i.e.,
OUI_LOCATION=f:\stage\Components\oracle\swd\oui\1.6.0.9.0\1\DataF
iles\Expanded
* Change the "JRE_MEMORY_OPTIONS" line to add "-nojit" as the
first argument.
(i.e., JRE_MEMORY_OPTIONS=-nojit -ms16m -mx32m)
^^^^^^
* Other entries should remain the same
c. Launch setup.exe from the temporary location on your hard
drive (i.e.
e:\temp\install\win32\setup.exe). This will use the
modified
oraparam.ini and pick up the information from the CD since
the absolute
locations are specified.
Choose a Custom install and choose not to create a database
during the
install. This way, the Database Configuration Assistant will
not be launched
during installation.
The Net8 Configuration Assistant will still be launched, and
there is no way
to suppress it. You will need to kill the Net8 Configuration
Assistant if it
hangs due to the bug. The installation still will have been
successful, and
you can run the DBCA and NetCA after installation.
To kill NetCA if it hangs during installation:
In the "Configuration Tools" window, highlight the "Net8
Configuration
Assistant" and click "Stop". If that does not work, look for
the most recent
JRE process using the Task Manager, and kill it manually.
NOTE: the OUI
itself will also have a jre process. Be sure to kill the one
with the most
recent date, which should be the jre process being used for
Net8CA, not the
one for OUI itself.
After killing the configuration tools and continuing through
the installation
to the "End of Installation" screen, you should modify the
configuration tools
to use "-nojit", then call the appropriate tools from the
Start Menu.
Once installation is complete, each of the following files in
the ORACLE_HOME
needs to be modified:
assistants\dbca\dbassist.cl
assistants\dbma\dbmig.cl
assistants\ifa\ifa.cl
bin\elogin.cl
bin\owm.cl
ldap\oidamdin\oidadmin.cl
network\tools\netasst.cl
network\tools\netca.cl
owm\install\instelogin.cl
owm\install\instowm.cl
Edit the contents of the above files to add "-nojit" as shown
below:
Command=("C:\Program Files\Oracle\jre\1.1.7\BIN\JREW" -nojit
-classpath ....
this is the only thing you need to add --> ^^^^^^
Then, launch the necessary tools, like Net8CA and DBCA from
the Start Menu.
Patches
~~~~~~~
Currently there is not a patched installer available to deal
with this
problem, the workaround listed above must be used.
References
~~~~~~~~~~
[BUG:1507768] INSTALLER FAILS WHEN RUNNING ON NEW PENTIUM 4
(IV) PROCESSORS
[BUG:1507946] INSTALLER FAILS WHEN RUNNING ON NEW INTEL
PENTIUM 4 (IV) PROCESSORS
@[BUG:1518935] SYMCJIT.DLL DOESN'T WORK WITH THE NEW P4
PROCESSORS
Oracle
Support Services.
Copyright (c) 1995,2000 Oracle Corporation. All Rights
Reserved. Legal Notices and Terms of Use.
================================================================
The solution of making a local copy of the installation CD on
the hard disk and renameing symcjit.dll to symcjit.old does
work to allow installation of Oracle Client 8.1.7 on a Pentium 4
This function is useful and you can find two file to rename
===============================================================
Windows ME
Solution to the installation of Oraclei8.1.7 PE in Windows Millennium
Oracle does not support installing version 8.1.7 PE into
Windows Millennium.
As an unsupported workaround, you may add the following line
to the [compatibility95] section of win.ini prior to
installation:
Jrew=0x00080000
After setup is complete, Oracle will recommend a reboot.
There is one additional step necessary prior to reboot;
Oracle may add a non-standard path statement to the
autoexec.bat file. Please modify this SET PATH
statement to use short-filenames if you find a quoted
LFN string represented as part of the path. You can
confirm that the path was merged successfully into the
registry after reboot by examining the PATH variable
in the registry at
HKLM\System\CurrentControlSet\Control\SessionManager\Environment
Symptoms of a missing Oracle path statement in the registry are that Net8 Easy Config will not launch.
Please note that Oracle does not support the use of this
product in Windows ME, but have authorized these workarounds
for testing purposes only.
===============================================================
Windows XP Home Edition
Oracle 8i is not certified on windows XP. Even if yes, it must be Windows XP Professional.
You can install Oracle8i on windows XP Home Edition, try like this:
1 - Copy your Oracle CD into hard disk in your
machine. For example Copy from oracle8i CD into C:\Oracle\ ...
2 - Search the two files named Symcjit.dll on the D drive (where you have copied Oracle8i. You can found them in (example):
C:\Oracle\stage\Components\oracle.swd.jre\1.1.7.30\1
\DataFiles\Expanded\jre\win32\bin\symcjit.dll
3 - Rename this file (Example): symcjit_back.dll (make sure to find two files and rename them)
4 - Execute the Oracle setup.exe from C:\Oracle\setup.exe
===============================================================
When Oracle 8i dies on the install or the installer hangs, here is the fix for this, make sure that you have Service Pack 2 installed.
1. \JRE\1.3.1\ From Sun. (You can download java program at http://java.sun.com/products/jdk/1.1/jre/download-jre-windows.html)
2. Install the java file.
There is also a problem in the installation disk.
3. Make a copy of the Oracle 8i disk on the local hard disk.
4. Do a search for the two files called symcjit.dll and rename them for example: symcjit.old.
5. Install Oracle from the win32 directory.
================================================================
PLEASE NOTE THAT ORACLE DOESN'T SUPPORT THE USE OF THOSE PRODUCTS IN WINDOWS ME, BUT HAVE AUTHORIZED THESE WORKAROUNDS FOR TESTING PURPOSES ONLY

Oracle 9i Client Software On Windows 8 64 bit

Hi Guys,
How to Install Oracle 9i client software on Windows 8 64bit?
Please help on this one.
Thanks in advance.

d1f6d790-7017-49dd-bd62-4a31fbab607f wrote:
Thank you very much srini.
Actually the answer is it's a big organization, not that easy to upgrade to latest version. So currently using the old one.
They didn't find it so difficult to upgrade the OS to a bleeding edge version .... so why do they find it difficult to upgrade the Oracle client? Are they also running MS Office 95, "because it's not so easy to upgrade"?
In big organizations, new desktops are built from an image, and that image can just as easily be built with a newer version of Oracle client, if need be.

Is Oracle 10g Express Edition compatible with Windows 2000 advanced Server

I have installed Oracel 10g Express Edition on windows 2000 advanced Server, but it is not working properly, but when i installed it on Windows 2000 Professional, then it is working properly, Does anybody know why this is happening. If anybody know why this is happening, please tell me and also tell me how can i install Oracle10g xe in Windows 2000 advanced server.

There should be no issues. A few possible reasons you are running into problems:
- installation using a domain administrator (it works best using a local admin);
- firewalls or anti-virus software or other port blocking mechanisms;
- DHCP resets;
However, unless you tell us exactly the symptoms we are only guessing.
My car didn't start this morning, but my wife's car did. Can you call me why based on this information?

Oracle 11g client installation on Windows 7 Home Premium (64-bit)

I'm having trouble installing the Oracle 11g client installation on Windows 7 Home Premium (64-bit) machine.
Can Oracle 11g client even be installed on the Windows 7 Home Premium 64?
Thanks!

Hi;
As mention here home OS not supported, so as mention here again if you make some googling you can find link&blog which is mention to create WM machine, install linux(you can use OEL linux which is free and can be download from e-delivery site) than you can make 11g installation on it
Regard
Helios

Problem installing Oracle forms and report in windows 7

I have a problem while installing Oracle forms and reports in windows 7 64 bit
The error is : [as] [ERROR] [] [oracle.as.provisioning] [tid: 20] [ecid: 0000IY5_e_EApIRMyYAhMG1BuDGr00000B,0] [[
oracle.as.provisioning.exception.ASProvWorkflowException: Error Executing workflow.
at oracle.as.provisioning.engine.WorkFlowExecutor._createDomain(WorkFlowExecutor.java:688)
at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:393)
at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
at oracle.as.install.classic.ca.standard.StandardWorkFlowExecutor.execute(StandardWorkFlowExecutor.java:65)
at oracle.as.install.classic.ca.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:26)
at oracle.as.install.classic.ca.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:61)
at oracle.as.install.classic.ca.ClassicConfigMain.doExecute(ClassicConfigMain.java:124)
at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:335)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:87)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:104)
at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:63)
at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:158)
at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:83)
at java.lang.Thread.run(Thread.java:619)
So I Google for it and found that this is version mismatch (May be I am wrong) and it tells that I have to install WLS - 10.3.2 with ofm_pfrd_win_11.1.1.2.0_64 (1 to 4)
But I am unable to get wls version 10.3.2.
For better understanding I am listing my installers :
(I) Windows 7 Ultimate 64 Bit
(II) (Oracle 11g) win64_11gR2_database (1 & 2)
(III) ofm_pfrd_win_11.1.1.2.0_64 (1 to 4)
(IV)wls1033_generic.jar , wls1033p_generic.jar , wls1035_generic.jar
(V)accessbridge-2_0_2-fcs-bin-b06
(VI)ofm_rcu_win32_11.1.1.2.1_disk1_1of1,ofm_rcu_win_11.1.1.3.1_disk1_1of1
(VII) ofm_wc_generic_11.1.1.5.0_disk1_1of1
(VIII)jdk-6u38-nb-7_2_1-windows-i586-ml , jdk-6u38-windows-x64
(IX) oepe-wls-indigo-installer-11.1.1.8.0.201110211138-10.3.6-win32
(X)wls1033_oepe111150_win32.exe
(XI)wls1035_win32.exe
(XII)wls1035_oepe111172_win64
(XIII)oepe-indigo-installer-12.1.1.0.1.201203120349-12.1.1-win64
After the installation while configure the forms reports, I am stuck while creating domain.
steps I follow is :
(i) Install Windows 7 Ultimate 64 Bit
(ii) (Oracle 11g) win64_11gR2_database (1 & 2)
(iii) wls1033_generic.jar
(iv) accessbridge-2_0_2-fcs-bin-b06
(v)ofm_rcu_win32_11.1.1.2.1_disk1_1of1
(vi) ofm_pfrd_win_11.1.1.2.0_64 (1 to 4)
Please any body help, for the installation of oracle forms and reports.
I have a formatted Windows 7 Ultimate
Where I have installed Adobe Acrobat Reader
IIS server from windows installer
Now I want to know the exact procedure so that i can run the forms and report in my machine.
This is my first installation of Oracle forms & Reports, so please do not pre assume about my understanding (Like "to install this he surely did this environment settings" )
Please specify all the steps
Furthermore if Another software I have to download then please tell me.
And I will be grateful if you specify the mistakes in my side.
Looking forward with anticipation.

Solved, Thank you

Is it possible to install oracle 11g 32 bit in windows 7 64 bit?

I just need some advice on installing oracle 11g 32 bit on windows 7 64 bit.
If its possible to install oracle 11g 32 bit on 64 bit please let me know how.
Thanks

857211 wrote:
I just need some advice on installing oracle 11gWhat part/product of "oracle 11g" exactly?
Installation Guides should be clear enough, if read. Also read Release Notes for additional support/unsupport info.
http://docs.oracle.com/cd/E11882_01/install.112/e24186/reqs.htm#CHDHGGFE
http://docs.oracle.com/cd/E11882_01/install.112/e24187/pre_install.htm
However the Installation Guide for Database Client adds:
"Note: Oracle provides 32-bit (Windows x86) and 64-bit (Windows x64) versions of Oracle Database Client. _Oracle certifies 32-bit Oracle Database Client on Windows x64_." (underline added)

Install Oracle Forms 10g R2 in Windows 7

Hi,
does anyone has ever succeeded to install Oracle Form 10g R2 in Windows 7 Home Premium?
How to overcome the Jinit issue in there? Friend of mine suggested we can download the Jinit for Vista version and replace the current Jinit with it.
Do I need to change anything too in Formsweb.cfg? Windows 7 works with IE 8.
Is the Forms can work with Oracle 11g R1 client 64 bit for Windows?
thanks in advance.

Why bother with JInit? It's long desupported. Just replace it with the latest Java Plugin, and you'll be fine.

Issue while Installing Oracle Data Access Software for Windows

All,
Iam getting the following error while installing Oracle Data Access Software for windows. Iam installing in WindowsXP, with Oracle 9i release 9.2.0.7.0 DB and client in the same Box.
It shows
The Specified Key key was not found while trying to GetValue
* Stop installation of all Products
* Stop installtion of this componenent only.
Kindly let me know why this error is showing up.
Regards
Ramesh

Most probably you have hit this issue:
"If you have more than one Oracle Home installed on the same machine (e.g. Oracle8i client and Oracle9i Release 2 client), use the Oracle Home Selector to run your applications with Oracle9i Release 2 client. "
As documented on the Oracle Data Access Software for Windows. Release 9.2.0.4.0
~ Madrid.

Installing Oracle 9i client on remote PC with out using distrib on cd-rom

Hello!
I have a such problem. I must install oracle client on a remote PC with no user assistant (with out usin cd-rom, I must use distrib from local hard drive).
When I trying to launch setup file ORACLE 9i from Hard drive I have an error abut using java.
So that I want to ask. may be some one knew ho to install Oracle 9i client from distrib which dispose on local hard drive???

Hi,
The minimum supported version for windows 7 is 10.2.0.5. Unsupported version may work, but it will create unexpected issues.
How to Install Oracle 10gR2 on MS Windows 7/Windows 2008R2 (Doc ID 1173433.1)
Thanks,
Krishna

Unable tu install Oracle 9i Client on Win XP Professional

Hello!
I have problems installing Oracle 9i Client on Windows XP Professional. The error appears when I try launching the setup.exe file from the "Disk1" folder on my HD. The message error says something like "I can't run the set up". If somebody have any ideas please help me.

double click autorun.exe in the autorun folder.

Oracle 9i client tools

Hey all,
I just installed Oracle 9i Developer suite. the Database is in my school. The problem is the book that I have is suggesting that I have to download something called the Oracle 9i client tools version 9.2 in order to connect to the server at the University. Can any body tell me where to get this client tools or have another idea to do that. Thanks

Hey all,
I just installed Oracle 9i Developer suite. the Database is in my school. The problem is the book that I have is suggesting that I have to download something called the Oracle 9i client tools version 9.2 in order to connect to the server at the University. Can any body tell me where to get this client tools or have another idea to do that. Thanks

Install oracle db 11g r2 on Windows 7 Error

Hi,
i install oracle db 11g r2 on windows 7 ultmate and founded error :
file not found orandce11.dll.dbl
and
file not found orancds11r.dll.dbl
how to solution ?
thanks,
Khun

Coincidentally, I installed the 11.2 client myself this morning and got the same result. In my case, I'm loading to Windows XP Pro. I have no solution, but I can add a bit of detail in case it helps.
I'm installing from a file I downloaded last week. There is only one zip file, so your suggestion doesn't apply Werner. I did a search through the entire directory structure, and these files don't appear at all. Of the two files orandce11 and orancds11r, there is nothing closely resembling the former, but there is the similar file orancds11.dll (same right up to the trailing 'r').
In both cases, I selected to continue with the install. It finished sucessfully and works, but I don't know what these files are for. I did a Google search, and the one and only hit was Khun's post.
Here are the log entries, I included a few of the preceding lines in case the context helps.
INFO: Copying files for 'Oracle Advanced Security 11.2.0.1.0 '
INFO: Copying files for 'Oracle Advanced Security 11.2.0.1.0 '
INFO: 4/19/10 9:46:33 AM EDT: Starting install Install Phase 1 of component Oracle Advanced Security
INFO: Calling Action fileActions10.2.0.6.0 moveFile
     selectedNodes = null
     source = D:\oracle\product\11.2.0\client_1\bin\orandce11.dll.dbl
     destination = D:\oracle\product\11.2.0\client_1\bin\orandce11.dll
INFO: moving 'D:\oracle\product\11.2.0\client_1\bin\orandce11.dll.dbl' to 'D:\oracle\product\11.2.0\client_1\bin\orandce11.dll'
INFO: moving 'D:\oracle\product\11.2.0\client_1\bin\orandce11.dll.dbl' to 'D:\oracle\product\11.2.0\client_1\bin\orandce11.dll'
INFO: Exception thrown from action: moveFile
Exception Name: FileNotFoundException
Exception String: File not found D:\oracle\product\11.2.0\client_1\bin\orandce11.dll.dbl
Exception Severity: 2
INFO: Exception handling set to prompt user with options to Retry Ignore
User Choice: Ignore
INFO: Calling Action fileActions10.2.0.6.0 moveFile
     selectedNodes = null
     source = D:\oracle\product\11.2.0\client_1\bin\orancds11r.dll.dbl
     destination = D:\oracle\product\11.2.0\client_1\bin\orancds11r.dll
INFO: moving 'D:\oracle\product\11.2.0\client_1\bin\orancds11r.dll.dbl' to 'D:\oracle\product\11.2.0\client_1\bin\orancds11r.dll'
INFO: moving 'D:\oracle\product\11.2.0\client_1\bin\orancds11r.dll.dbl' to 'D:\oracle\product\11.2.0\client_1\bin\orancds11r.dll'
INFO: Exception thrown from action: moveFile
Exception Name: FileNotFoundException
Exception String: File not found D:\oracle\product\11.2.0\client_1\bin\orancds11r.dll.dbl
Exception Severity: 2
INFO: Exception handling set to prompt user with options to Retry Ignore
User Choice: Ignore
Thanks,
Roddy

Installing Oracle 8i client tools on Windows 2K Advanced Server SP2

Similar Messages

Maybe you are looking for