Installing Oracle 8I PE for Windows 2000

I downloaded the huge zip file, unzipped it, and tried to run set up....it won't run. What am I missing?
Thanks
DDS

Hi
The following is a an excerpt of solution to Windows ME problem provided by Beau Leo:
I have helped lots and lots of people fix the installation problems and they said it does work great!
Oracle8i and 9i are not certified on Windows ME because ME is not supported. here is the following resolution:
1. Edit the WIN.INI file by adding JREW=0x00080000 at the end of [Compatibility95]
section
2. Save the WIN.INI file
3. Reboot your machine
4. Execute the setup.exe from the win32 directory
Best Regards,
Bo
PLEASE NOTE THAT ORACLE DOES NOT SUPPORT THE USE OF THIS PRODUCT IN WINDOWS ME,
BUT HAVE AUTHORIZED THESE WORKAROUNDS FOR TESTING PURPOSES ONLY.
I AM NOT RESPONSIBLE FOR ANY DAMAGES OR LOSS OF YOUR DATA TO YOUR COMPUTER.
Hope that helps...

Similar Messages

Can not install Oracle 9i R2 on Windows 2000

I can not install Oracle 9i R2 on Win 2000. It failed at 48% with this message.
Error in writing to file C:
\oracle\ora92\oem_webstage\oem_webstage_8.jar
I tried by copying the 3 disks to my hard drive and reinstall but not success.
Help me please.
Thanks
Ken Wongho

I've been able to install 9iAS on Windows 2000 - I have the Origin database on a Solaris machine.
Your best bet is to have all 3 folders Disk1/Disk2/Disk3 on your computer and the run the install from there. I didn't have the disk space on my computer and ran it from a shared drive.
I'm currently in the post install section trying to Configure cache, and wondering if it's still working or hung up.
The 9iAS Installation took 3 1/2 days to run - I have a 300 Mhz PC with about 380 RAM. The Cache Configuration has been running for over 26 hours.
I don't know if this helps but I hope it does.
I didn't experience any of the problems you have.
Hope this helps

Oracle 8 Driver for Windows 2000

I recently upgraded my Web servers to Windows 2000 Advanced Server. Previously I was running the site in Windows NT and used the setup program that came with the application to install the ODBC driver. I ran the same program in Windows 2000 but at the end of installation, it displays an error. Where do I download Driver and setup program to install correct version for windows 2000 Advanced Server?

Which version of Oracle do you have and what is the error? Older versions of Oracle, i.e. 8.0.5 & 8.1.5, probably pre-date Windows2000 and thus aren't likely to be certified there.
Justin

Steps for installing oracle 9i AS in windows 2000

Hi,
I have windows 2000 server and i have already installed oracle 9i database in c:\oracle9ids folder.
Now i want to install oracel 9i Application server and oracle 9i Infrastructure.
I am bit confused with the procedure of installation.
Can anyone help me with the steps and sequence whether i have to install the oracle 9i application server first and if so,what should be the oracle home for this.For this should i select c:\oracle9ids (where i have installed oracle 9i database) as the oracle home or should i install this in a separate oracle home.
Similarly when i should install oracle 9i infrasturcture(is it before the oracle 9i application server installation or after this) and also what should be the oracle home for that(is it the oracle home c:\oracle9ids,where the oracle database is installed or in a separate oracle home).
Also,can anyone send me the links for these 2 manuals.
Oracle9i Application Server Concepts Guide
Oracle9i Application Server Administrator's Guide
Any help is appreciated.
Thanks

Sri --
All of the doc is available from OTN - follow the links on the left nav bar -> Documentation -> Oracle9iAS and then choose the Doc library for the specific release you are interested in. The site seems to be down right now but if you follow the links above you will find both of these on the 'Getting Started' tab.
Oracle9i Application Server Concepts Guide
Oracle9i Application Server Administrator's Guide
The installation manual and release notes are in the platform specific doc libraries - also available from the Documentation link on the left nav. These should provide the information you need to understand the steps to follow to install - if you find these steps confusing please let me know your specific comments so we can look to make improvements in the next release of the product.
I am assuming you are installing Oracle9iAS 9.0.2.x.
Let me clarify how the Oracle9iAS 902 install works.
1. Firstly, if you want to use the Oracle9iAS infrastructure - ie for management purposes/single signon/portal or other components that require metadata then you need to install the Infrastructure first.
This must be installed into it's own brand new oracle_home. This will, by default, install an Oracle9i database tha[i]Long postings are being truncated to ~1 kB at this time.

How to install oracle enterprise edition on windows 2000

I have tried installing oracle 8.04 enterprise edition for NT on windows 2000 for several times. But it always missed listening on some serives.
could anyone help me?
Thank you!

I am installing Oracle 816 on Win 2K Server. Its installing everything except I am getting error while in the
process of creating Instance and Initializing it.
I am getting
Oracle Database Configuration Assistant Alert
"ORA-12638: Credential retrieval failed"
while in the process of copying database files and initializing database. And the process is halting
at this point with showing 85% completion. Do you think any conflict between OS files between Win 4.0
and Win 2K?
What do I have to do to resolve this.
I tried to Install on 3 machines and I get this problem on all machines. But, when I Upgrade to Win 2K from NT 4.0 and doing the Oracle 816 Installation, I am succesfull.
This is happening only on fresh Install of Win 2K.
null

Install Oracle 9i RAC on Windows 2000

Hi there,
Can I install Oracle 9i Real Application Cluster on the Windows 2000 without using logical drives? Does Oracle 9i RAC support cluster file system on Windows 2000? If does, could you please give me an example?

Hi there,
Can I install Oracle 9i Real Application Cluster on
the Windows 2000 without using logical drives? Does
Oracle 9i RAC support cluster file system on Windows
2000? If does, could you please give me an example?
Yes, you can install oracle RAC with OCFS, see metalink note 178882.1
"Step-By-Step Install of RAC with OCFS on Windows 2000"

Can't install oracle 9i DB on Window 2000

Hi all,
I have a error message with "Need Service Pack 1" when I install oracle 9i DB. I have download IE Service Pack 1 and try it again. The problem is stay still. I don't konw why? Could anyone tell me? Please.
Amy

The minimun servipack to install Oracle9i on W2k is Srvpack 2.
You can download it from Microsoft site or you can post your e-mail address to send you it.
Joel P�rez

Help! oracle report out of order after update Rollup for windows 2000 sp4

hello once again
i haven't received any solution of my problem, so i am again uploading it.
----PROBLEM IS GIVEN BELOW-----
i am having a problem in oracle report printing (2000,6i). I have installed patch "update Rollup for windows 2000 sp4" on windows 2000. now when i send report(132 column) for printing to the printer, the report fails to expand to 132 columns and data is printed in unformatted fashion. in order to print the report correctly i have to remove the patch from the windows.i have set all parameters and
defining page size in files like wide180.PRT in printers folder in oracle directory.
Is there anyway to print the report without uninstalling windows patch?
thanks

I don't have any idea about this issue. Maybe someone else on this forum can help. Meanwhile, there are couple of places you can search for this issue:
Search google for printing issues with this patch
Search Microsoft forums for Windows 2000
And if you have metalink account, search metalink forum, document/note or open a SR for this.

Oracle report out of order after update Rollup for windows 2000 sp4

hi
i am having a problem in oracle report printing (2000,6i). I have installed patch "update Rollup for windows 2000 sp4" on windows 2000. now when i send report(132 column) for printing to the printer, the report fails to expand to 132 columns and data is printed in unformated fashion. in order to print the report correctly i have to remove the patch from the windows. Is there anyway to print the report without uninstalling windows patch?
thanks

Hi
first of all thanks for replying .if you mean defining page size in files like wide180.PRT in printers folder in oracle directory, off course i have set parameters. thing is that printing works fine without windows patch but it gets deteriorated after installing the patch.
Thanks

Oracle EBS R12 for Windows Installation Error

Hi,
I tried to install Oracle EBS R12 for Windows. My installation had failed. Listed below is the log information. On the Second log file (further down below) it is saying "TNS:no listener". Please help.
FIRST LOG FILE:Log Path: C:\Orale\VIS\db\tech_st\11.1.0\appsutil\log\VIS_bing-pc\06132024
C:\Users\Bing\AppData\Local\Temp>if 0 == 0 goto :TCFG_OK
C:\Users\Bing\AppData\Local\Temp>echo "runProcess_4"
"runProcess_4"
C:\Users\Bing\AppData\Local\Temp>REM
C:\Users\Bing\AppData\Local\Temp>REM Perform the instance configuration
C:\Users\Bing\AppData\Local\Temp>REM
C:\Users\Bing\AppData\Local\Temp>echo "Statusstring Configuring Database Technology Stack"
"Statusstring Configuring Database Technology Stack"
C:\Users\Bing\AppData\Local\Temp>(echo APPS & echo APPS ) | J:\StageR12\startCD\Disk1\rapidwiz\jre\NT\1.6.0\bin\java -DCONTEXT_VALIDATED=true -mx512M -classpath .;J:\StageR12\startCD\Disk1\rapidwiz\jlib\java;J:\StageR12\startCD\Disk1\rapidwiz\jlib\xmlparserv2.jar;J:\StageR12\startCD\Disk1\rapidwiz\jlib\ojdbc14.jar;J:\StageR12\startCD\Disk1\rapidwiz\jlib\oui\OraInstaller.jar;J:\StageR12\startCD\Disk1\rapidwiz\jlib\oui\ewt3.jar;J:\StageR12\startCD\Disk1\rapidwiz\jlib\oui\share.jar;J:\StageR12\startCD\Disk1\rapidwiz\jlib\oui\srvm.jar oracle.apps.ad.clone.ApplyDBTechStack -e C:\oracle\VIS\db\tech_st\11.1.0\appsutil\VIS_bing-pc.xml -stage J:\StageR12\startCD\Disk1\rapidwiz -showProgress -phase cfg -nopromptmsg
Log file located at C:\oracle\VIS\db\tech_st\11.1.0\appsutil\log\VIS_bing-pc\ApplyDBTechStack_06132042.log
| 0% completed
/ 0% completed
- 0% completed
\ 0% completed
| 0% completed
/ 0% completed
- 0% completed
\ 0% completed RC-00110: Fatal: Error occurred while relinking of ApplyDBTechStack
C:\Users\Bing\AppData\Local\Temp>if 1 == 0 goto :ICFG_OK
C:\Users\Bing\AppData\Local\Temp>echo "Cannot execute configure of database ORACLE_HOME using RapidClone\n";
"Cannot execute configure of database ORACLE_HOME using RapidClone\n";
C:\Users\Bing\AppData\Local\Temp>if "" == "TRUE" goto :ICFG_OK
RW-50010: Error: - script has returned an error: 1
RW-50004: Error code received when running external process. Check log file for details.
Running Database Install Driver for VIS instance
SECOND LOG FILEC::\oracle\VIS\db\tech_st\11.1.0\appsutil\log\VIS_bing-pc\ApplyDBTechStack_06132042.log
LOCAL : VIS
ORACLE_SID :
PATH : C:\Oracle\VIS\db\tech_st\11.1.0\perl\5.8.3\bin\MSWin32-x86-multi-thread\;C:\oracle\VIS\db\tech_st\11.1.0\bin;C:\oracle\VIS\db\tech_st\11.1.0\appsutil\jre\bin;C:\oracle\VIS\db\tech_st\11.1.0\appsutil\jre\bin;J:\StageR12\startCD\Disk1\rapidwiz\unzip\NT;C:\oracle\VIS\db\tech_st\11.1.0\bin;C:\Program Files (x86)\Oracle\jre\1.3.1\bin;C:\Perl\bin\;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\hp\bin\Python
LD_LIBRARY_PATH : C:\oracle\VIS\db\tech_st\11.1.0\lib
ECHO is off.
ECHO is off.
The log information will be written to
"C:\oracle\VIS\db\tech_st\11.1.0\appsutil\log\VIS_bing-pc\addlnctl.txt"
ECHO is off.
ECHO is off.
Starting listener process VIS ...
ECHO is off.
LSNRCTL for 32-bit Windows: Version 11.1.0.7.0 - Production on 13-JUN-2009 20:43:12
Copyright (c) 1991, 2008, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=bing-pc.horse.com)(PORT=1521)))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
32-bit Windows Error: 61: Unknown error
LSNRCTL for 32-bit Windows: Version 11.1.0.7.0 - Production on 13-JUN-2009 20:43:14
Copyright (c) 1991, 2008, Oracle. All rights reserved.
Starting tnslsnr: please wait...
TNS-12560: TNS:protocol adapter error
TNS-00530: Protocol adapter error
addlnctl.cmd exiting with status 1
OpenSCManager failed
adsvdlsn.cmd exiting with status 1002
ERRORCODE = 1002 ERRORCODE_END
.end std out.
.end err out.
AutoConfig Setup Phase
Running Setup Process 5 of 6 for AppsUtil
Executing script in InstantiateFile:
C:\oracle\VIS\db\tech_st\11.1.0\appsutil\install\VIS_bing-pc\afmkinit_inst.cmd
script returned:
Sat 06/13/2009
08:43 PM
"afmkinit_inst.cmd exiting with status 0"
ERRORCODE = 0 ERRORCODE_END
.end std out.
.end err out.
AutoConfig Setup Phase
Running Setup Process 6 of 6 for AppsUtil
Executing script in InstantiateFile:
C:\oracle\VIS\db\tech_st\11.1.0\appsutil\install\VIS_bing-pc\afmkinit.cmd
script returned:
Sat 06/13/2009
08:43 PM
1 file(s) copied.
1 file(s) copied.
1 file(s) copied.
"afmkinit.cmd exiting with status 0"
ERRORCODE = 0 ERRORCODE_END
.end std out.
.end err out.
Skipping Profile Phase
Skipping Apply Phase
adcvmlog.xml renamed to C:\oracle\VIS\db\tech_st\11.1.0\appsutil\log\VIS_bing-pc\adcvmlog.xml.06132042
[AutoConfig Error Report]
The following report lists errors AutoConfig encountered during each
phase of its execution. Errors are grouped by directory and phase.
The report format is:
<filename> <phase> <return code where appropriate>
[SETUP PHASE]
AutoConfig could not successfully execute the following scripts:
Directory: C:\oracle\VIS\db\tech_st\11.1.0\appsutil\install\VIS_bing-pc
adsvdlsn.cmd INSTE8_SETUP 1002
AutoConfig is exiting with status 1
RC-50014: Fatal: Execution of AutoConfig was failed
Raised by oracle.apps.ad.clone.ApplyDBTechStack
Thanks in advanced,
Edited by: amorsolo on Jun 15, 2009 9:12 PM

Hi user3726038,
I have seen posting about the installation of EBS R12/i11 saying it does not work with Windows Vista (64 bit). I went ahead and tried it anyway to see what kind of errors I get and to confirm if the errors I get are consistent with other people using Windows Vista. FYI, my installation went as far as 99% complete of step 2 of 5 before it errored out. I checked and noticed that many components of EBS have been installed with status equal zero which is good.
When I got the "TNS-12541: TNS: no listener", I went to Windows services, located the Oracle TNS service that was created by the EBS installation and tried to start it. Then I got this error: "error 1053 the service did not respond to the start or control request in a timely fashion". I googled the error message and the resolution is: "To resolve this problem, obtain the latest service pack for the Microsoft .NET Framework 1.1.". I have tried this but it does not work because my Windows Vista uses a higher version of .Net Framework 1.1. I have done more research but to no avail. However, it is fun as I learn many things about the EBS intallation and Windows Vista.
By the way, these are the steps when I run the rapidwiz on Windows Vista. Click on Start => Click on command prompt => right click on command Prompt => select run as administrator => CD to the path where the rapidwiz reside. Somehow if I use the regular command prompt the installation will die on step 1 of 5 even when I log in as administrator.
In your case you are using Windows 2k3. Make sure your OS is not 64 bit. Whenever you get an error and it does not say much, google it to see the resolution and make sure you read the Installation Guide. Hope this helps.

How to install Developer 10g suite on windows 2000

Hello
I downloaded the two files namely ds_windows_x86_101202_disk1 and
ds_windows_x86_101202_disk2.
When I try to install these after extracting to one temp folder and when I run the setup
on windows 2000 OS, I am always getting the the error insert disk 1 or specify the location of the product .
Please suggest how to proceed.
Also if I extract the above files can I proceed with that or are there are any additional files to be extracted. I fact I went through all the files and folders and whereever there was archive files I have extracted them.
I need urgent help to install these files.
Thanks in advance

<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Rajesh at [email protected]:
I am trying to install Oracle 8 Enterprose on
Windows 2000 , but I am geting OS Error
at the beginging of the installation.
Does anybody knows whether I can install
Oracle on Windows 2000?<HR></BLOCKQUOTE>
Hi Rajesh borikar,
I encounter similar problem as you. If you have any clues, please let me know too..thanks
regards
Andrew
null

Oracle 9.0.1.1.1 For Windows/2000 HTTP server

I can not start Oracle HTTP Server after Oracle 9.0.1.1.1 installation . I am getting error : The application or DLL $ORA_HOME\Apache\JServ\ApacheModuleJServ.dll is not a Valid Windows Image . Bad dll file in install disks ?
File ApacheModuleJServ.dll size 54K . Please send a valid ApacheModuleJServ.dll .

The Calendar SDK was only certified for the platforms you list, although I don't expect you would encounter any platform-specific problems using it on Windows 2000 or XP. That said, those platforms are not officially supported for 9.0.4.2, with all that implies.
The upcoming 9.0.5 release should be certified for Windows 2000 (only - and, of course, subject to change up until it actually ships).
Graham

Can not install Database Oracle8i (8.1.7) for Windows 2000/NT

I am not sucessfull in installing (Downloaded Unzipped then copied to CD) both version of Database "Oracle8i Release 3 (8.1.7)" Enterprise and Standard edition for Windows 2000/NT". After the start->run->autorun the CD spins for a minute then nothing happens. I tried running other files as well such as setup and install but still doesn't do anything.
Read the Installation document but can not find the answer, need help from anyone (Oracle expert to non-expert) is greately appreciated.
Server name = I am using Windows2000 "local" server.
Date/Time = Happened yesterday and today (March 3-4/2002)
Browser + Version = Microsoft Internet Explorer 5.0
O/S + Version = Windows2000 version 5.0
Error Msg = None (Will not install)
################################################################T
Thanks...

I am having the same problems!
Any help here would be great!! Stephen, Hi!, I think I know what the problem is....but I need your confirmation on my hypothesis. These are the scenarios:
PC#1
=====
In this computer it has operating system Windows2000 on C: Drive.
RESULT: SUCESSFULLY INSTALLED THE ORACLE 8I (8.1.7) Enterprise or Standard (trial version) on this PC.
PC#2
====
In this computer it has operating system WindowsME on drive C:
RESULT: When CD (Oracle 8i) was inserted on the CD Drive autorun was performed and Oracle 8i Installation screen pops up and I clicked on install and the Universal Installer shows up. A positive sign but I purposly aborted the installation.
PC#3
====
In this computer it has (2) operating system they are: Windows ME on Partitiion C: and another partition on F: the operating system is Windows2000. I Tried to install it on Windows2000 on partition F:
RESULT: CAN NOT INSTALL (trial version) ORACLE 8I (8.1.7) Enterprise or Standard version on F: Windows2000.
CD drive just spins for 15 seconds and nothing happens not even the Oracle Installation screen shows up.
MY HYPOTHESIS:
=============
The ORACLE 8I (8.1.7) Enterprise or Standard trial version either:
A) Can not be installed on another drive other than C: with a system with two (2) operating systems. and/or
B) Can not be installed with a PC with two (2) operating system.
Ben

Install Media for Windows 2000 using MSI

Does Oracle have install media for client installs which uses MSI (Windows 2000 Installation Technology)?
I want to be able to push out installs/upgrades of Oracle client software to Windows 2000 desktops (where some people may or may not have administrative rights on their desktops).

Windows 2000 is not supported, officially reaching the end of it's life in June 2010.
We would recommend that you upgrade to an actively supported version of the Windows operating system.
The minimum system requirements for Flash Player can be found here: http://www.adobe.com/in/products/flashplayer/tech-specs.html
As a short-term fix, you may be able to run a version of Flash Player 10.3 from the Archives page, which is currently supported with security updates; however, your operating system remains vulnerable as it is no longer maintained from a security perspective.
http://helpx.adobe.com/flash-player/kb/archived-flash-player-versions.html

Installing Latest Oracle Client & ODT for Windows 7 64-bit

I have a Windows 7 64-bit. I would think that using 32-bit Java, 32-bit Oracle Client and 32-bit ODAC would work just fine on this operating system. However, I had no luck getting it to run. Here is what I did and a few reasons why I prefer to never work with Oracle products:
Installed 32-bit JDK/JRE (1.6 Update 25)
Installed 32-bit Oracle Client (11g R2) Home 1
Tested connectivity from SQL Developer successfully
Installed 32-bit ODT (11g R3) to Home 1 (installer noted upgrades and new installs)
Failed connectivity from all things windows (ODBC, ADO, ADO.Net)
Uninstalled 32-bit ODT
Failed to uninstall 32-bit Oracle Client Home 1 (oraparam.ini file missing among other issues)
Installed 32-bit Oracle Client (11g R2) Home 2
Failed to uninstall 32-bit Oracle Client Home 1 (told to use deinstall tool)
Failed to uninstall 32-bit Oracle Client Home 2 (told to use deinstall tool)
Failed to run uninstall tool in Home 1 (told to download standalone deinstall tool)
Uninstalled 32-bit Oracle Client Home 2 (completed successfuly with errors - seriously?)
Uninstalled 32-bit Oracle Client Home 1 (completed successfully, but couldn't delete folder)
Oracle.DataAccess and Oracle.Web are still installed in GAC. Uninstall attempts fail (access denied)
Installed 32-bit Oracle Client (11g R2) Home 1
Tested connectivity from SQL Developer successfully
Tested connectivity from .Net 3.5 successfully (using 32-bit 2.0 dll)
Tested connectivity from .Net 4.0 successfully (using 32-bit 2.0 dll)
Does anyone have any suggestions on getting Oracle Data Tools for Windows to work before I try that again?

I realize ODT uses ODP, but installing release 3 upgraded the .Net 2.0 ODP DLLs (which were installed from the Oracle Client 11g Release 2 install) and added the .Net 4.0 DLLs. After that install everything stopped working from Windows land and then it took the better part of two hours to get it back to what it looked like prior to the install. The other thing weird thing I noticed is that although Oracle.DataAccess is registered in the 2.0 GAC I cannot add a reference that way using VS2010. I have to manually add a reference to the file path. Although it still appears I do not have to have the assembly copied locally to run, so the GAC registration seems to be working in that regard.

Installing Oracle 8I PE for Windows 2000

Similar Messages

Maybe you are looking for