Installing Oracle 9i Database and 9iAS on the same machine

I have read conflicting comments about this. Will Oracle 9i and 9iAS work if installed on the same server ?
I have seen a note before that the ORACLE_HOME will conflict if done.
However, for 8i it has been stated "the OAS does not seem to conflict with the Oracle 8i database, so select the default ORACLE_HOME to install".
Can you give me the diffinitive answer for 9i for this.
Many Thanks

I performed the installation and used a different Oracle_Home and had no issues. Now configuring Portal was another story...

Similar Messages

Installation of oracle 9205 database and client software on same machine

Hi,
I have installed Oracle 9205 on my laptop running on windowsxp sp2.
I intent to create a Database and access the same using developer forms which again would be installed on the same laptop.
Please help me in configuring this scenario.
how to configure the listener.ora, what about sqlnet.ora and tnsnames.ora for the server part as well as the client part
also what services need to be configured in windows xp
Altaf

Altaf,
Problem is you don't see similar output from your lsnrctl status. Try rebooting your machine and make sure you see similar output.
How exactly are you trying to connect to your service?
Sqlplus sys/password as sysdba
sqlplus sys/password@INS_LIST as sysdba
$ lsnrctl status
LSNRCTL for 32-bit Windows: Version 10.2.0.1.0 - Production on 16-DEC-2008 13:46:06
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=hostname)(PORT=1521)))
STATUS of the LISTENER
Alias                     LISTENER
Version                   TNSLSNR for 32-bit Windows: Version 10.2.0.1.0 - Production
Start Date                16-DEC-2008 09:18:21
Uptime                    0 days 4 hr. 27 min. 45 sec
Trace Level               off
Security                  ON: Local OS Authentication
SNMP                      OFF
Listener Parameter File   C:\oracle\product\10.2.0\db_1\network\admin\listener.ora
Listener Log File         C:\oracle\product\10.2.0\db_1\network\log\listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=NROHILLA01.usi.corpusi.net)(PORT=1521)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC0ipc)))
Services Summary...
Service "DSSXDB" has 1 instance(s).
Instance "dss", status READY, has 1 handler(s) for this service...
Service "DSS_XPT" has 1 instance(s).
Instance "dss", status READY, has 1 handler(s) for this service...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "dss" has 1 instance(s).
Instance "dss", status READY, has 1 handler(s) for this service...
The command completed successfully

Diff between Oracle 9i database and 9ias application server.

Can any one brief in detail the difference between Oracle 9i database and 9ias application server.

Hi,
Your question is the answer. Oracle9i Database manages all your eBusiness data and Oracle9iAS runs all your eBusiness
applications. In a 3 tier architecture, Oracle9i Database fits in the Database tier where as Oracle9iAS fits in the middle
tier. Oracle9iAS provides an infrastructure to run different types of applications(J2EE thru OC4J, Forms applns, Portal
based applns, Wireless applns etc..)
Cheers !
-- Rajesh
Can any one brief in detail the difference between Oracle 9i database and 9ias application server.

Can i run 9ias versions 1 and 2 on the same machine

i need to install 9ias versions 1 and 2 on the same machine but in separate databases, is this possible? if it is possible are there any issues that i need to be aware of?

You can install the portable Firefox 3.6.x version to access websites that do not work with Firefox 5+.
*http://portableapps.com/apps/internet/firefox_portable#legacy
*http://portableapps.com/apps/internet/firefox_portable/localization#legacy36
*Firefox 6.0.x: http://www.mozilla.com/en-US/firefox/all.html
*Firefox 3.6.x: http://www.mozilla.com/en-US/firefox/all-older.html

Trying to install photoshop elements 11 and keep getting the same error message: "The installation process encountered an error while installing shared technologies."

Trying to install photoshop elements 11 and keep getting the same error message: "The installation process encountered an error while installing shared technologies."

Medops20 please see Install rollback and Shared Technologies | Windows for information on how to resolve the current error.

Designer 6i and 10g on the same machine?

I have Designer 6i and corresponding repository on my machine.
The problem with 6i I can't save diagramm in HTML format
I believe I can save in HTML format in 10g or other?
Can I install on the same machine 10g designer?
should I configure new repository?
TIA

See my update on your earlier question.
As for running 6i and 10g on the same machine, yes you can do it. You just have to install them in separate Oracle Homes, and be careful when you tell them which version of EXP and IMP to use. There is one MAJOR caveat, however. They cannot use the same Designer Repository - 6i client won't talk to a 10g repository and 10g client won't talk to a 6i repository. You can upgrade a 6i repository to 10g with the RAU, but take a backup before you do - the only way to go back is to restore your backup. Besides, I think that if you upgrade to the last supported version of Designer 6i (you should be able to get it from MetaLink) you will get the Publish Diagrams utility.
Frankly, my opinion is that there is only one reason to stay on 6i - if you need to generate and support 6i client/server Oracle Forms. If you don't use Oracle Forms, or if you have moved on to Web Forms with the middle tier Forms Server, I'd recommend an upgrade to Designer 10g and Developer 10g.

What is the best way to have access to OSX and OS9 from the same machine?

What is the best way to have access to OSX and OS9 from the same machine?
Do I need to partition the hard drive? Installed both Tiger and OS 9 on the G5 and it is having problems starting up properly.
G5 Mac OS X (10.4)

And here is the prove for Edwin's message: Macintosh: Some Computers Only Start Up in Mac OS X

Replace a 2003 (not R2) File Server with a 2012R2 files server and preferably keep the same machine name and IP when finished

I am wanting to replace a 2003 (not R2) File Server with a 2012R2 file server and preferably keep the same machine name and IP when finished. For the moment I just need some "high level" guidance, little details can be worked out once I know
which direction I will go. I was considering that DFS might be a way to help get through the process although when finished the 2012R2 Files server will be by itself with no other file server planned at this time. DFS can stay installed for maybe
future purposes but clearly I wouldn't need the DFS Replication with only one machine.
Here's a few details of the environment....
1. DC's are 2012R2 but it is still 2003 DFL because the old 2003 DCs are still present. But likely they will be gone and the DFL elevated before I start on the File Server project
2. Nearly all machines in the facility have a shortcut on the "All Users" Desktop that points to the existing old File Server. Editing or replacing that shortcut would be a major pain,...hence why I want to keep the same machine name at least,
and maybe the same IP if not too much trouble. This way the existing shortcut would continue to work with the new 2012R2 File Server. The UNC path represented in that shortcut is also configured into one or more of our major business applications,
futher emphasizing the need to keep the UNC path the same throughout the process.
3. The facility runs 24/7/365 but is "light" on weekends. The political environment is such that there is little to no tolerance for any down time at all.
4. Would DFS (based from the 2012R2 machine) be a good tool to get where I need to go?
Thanks for any suggestions.
Phillip Windell

Hi Sharon,
I've done some more reading and have a few new ideas to run past you....
Yes regular DFS wouldn't help and the Namespace would still be different than how it was with just the old server. However I was thinking DFS Replication could replace the purpose of RoboCopy and it would keep the two locations "in sync" until I was ready
to flip over to the new server. DFS Rep can exist independently of a DFS Namespace, so a Namespace is not even needed. It needs a minimum of 2003R2 for the "later & better" DFS Rep but I believe 2003 can do an "in place" upgrade to 2003R2, so I would upgrade
the old server to 2003R2 first. As long as the DFS Rep on 2012R2 and 2003R2 will properly interact I think that will work.
Thanks for the reg info on the Shares. I'm debating if editing that would reg file would really be much better than manually creating the Shares on the new server while the DFS Replication was doing its job. I'll probably export that Key as a
safety move whether I use it or not.
Once the DFS Rep is fully in sync and the Shares are in place on the new server, I figure I would then:
1. Remove the DFS Replication Object (optionally remove DFS Services completely)
2. Rename the old File Server to something else and set it to DHCP
3. Rename the new File Server to the name I want to use and give it the IP the old server had.
How does that sound?
Phillip Windell

Is it possible to run VLM and lmtools on the same machine

hi together ... is it possible to run VLM and lmtools on the same machine without any problems?
the running system will be Windows Server 2008 R2 x64! maybe we will install the license server on the virtual server.

Hi SvenNittmann,
in general, it should be possible to run both tools (VLM and lmtools for FlexNet) on the same machine. But I wouldn't recommend you this way, because NI VLM is also build on top of FlexNet and sometimes you will receive ugly problems with the installation of both tools on the same PC. It is possible to use VLM in a virtual machine without any problems or restrictions. NI provides information about the usage of VLM in a virtual machine, like you can see here:
Volume License Manager on a Virtual Machine - National Instruments
http://digital.ni.com/public.nsf/allkb/5730FDDC97F9157E8625755F00749CFF?OpenDocument
I also use VLM in a virtual machine and I could recommend you the same solution.
Regards, Stephan

CS3 Bridge and CS4 on the same machine.

Hello Everyone,
I have adobe photoshop CS3 and Illustrator CS4 on my machine. Any known issues for running bridge CS3 and CS4 on the same machine? Some experts at telling me not to use Photoshop CS3 with Bridge CS4, just wondering. Thanks for you replies.

Bridge is not really a stand alone product, and tuned to work with its current version of PS. Also, Bridge CS4 has some features changed and/or added. So if using CS3 Bridge you might have aspects that don't work with PS CS4.
I would keep CS3 on the machine if you don't need the HD space, until you feel you no longer need the older version. But use them as a pair as intended. Also, only have one Bridge running at a time.
I did not upgrade to CS4, but from what I have read I see no reason to use Bridge CS3 as the upgrade is faster, less prone to crashes, and has added features.
CS4 PS on the other hand can be tricky if you don't have a newer computer with a good video card.

Is it possible to have Oracle client 7 and 9 at the same time?

I have Windows XP and I need to have both clients at the same time in the same machine.
Is it possible to have multiple oracle homes, one for each client version?
thanks.

Hi,
Thanks for the quick replay...I supposed that answers but I have seen some info where it said that Oracle Client releases previous to 8.0.4 supports only single home.
The case is my customer has already installed and Oracle Client 7 to access some old database, now we need to install on the same computer a Oracle Client 9.2, you mean there is no problem with this ?
Thanks in advance....

How to install iFS and iAS on the same machine?

I have successfully installed iFS on a Windows NT 4 machine. Now, I would like to install iAS Enterprise Edition on the same machine. The installation guide for iAS says that I should first deinstall all products from the default ORACLE_HOME. I have not found a clue as to what to do if I want to keep the software already installed.
Would it work if I tried (after installing iAS) re-install iFS using different ORACLE_HOME directory?
Is there a white paper or any other document that would clear up the issues involved in installing Oracle products in ORACLE_HOME?
Thanks a lot,
Marek

You can install IAS on the same machine that Oracle and IFS are on. Install IAS into a new Oracle Home (i.e. D:\IAS).
This worked for me.
I am still waiting to hear how (look for my post about 20 below yours) how to configure IFS to use the Apache Web Server that is part of IAS.
Good Luck.
Maybe one of these days Oracle will create an IAS discussion forum. This is my third request and I haven't heard anything back from them yet.
null

Developer 1.6, 2.1 and 6i on the same machine does not work

I have installed the three versions on the same machine against Oracle 7.3.4 in another node. Each one is installed in a different OracleHome. Version 2.1 and 6i works fine but when I run Forms 1.6 I get a message telling me that it cannot find the fmcus.msb.
Is trying to find it in the path of the Developer 2.1 and of course it does not work.
The Oracle Home selector only shows me those corresponding to 2.1 and 6i.
It is possible some workaround even if running one version at a time.
Thanks.

I have installed the three versions on the same machine against Oracle 7.3.4 in another node. Each one is installed in a different OracleHome. Version 2.1 and 6i works fine but when I run Forms 1.6 I get a message telling me that it cannot find the fmcus.msb.
Is trying to find it in the path of the Developer 2.1 and of course it does not work.
The Oracle Home selector only shows me those corresponding to 2.1 and 6i.
It is possible some workaround even if running one version at a time.
Thanks.

Can I install two independent instances of Thunderbird on the same machine?

It is required to install two instances of Thunderbird on the same machine, each with its own account(s), Profiles folder(s) and sign-on password, so that each of two users can securely use Thunderbird at different times..
How can this be achieved?
Thanks,
NMB1

The simplest method is to install Thunderdird normally from an admin account. The two or more users then use ordinary none admin accounts. Thunderbird will be available to each user and each OS account has a separate Thunderbird profile, so each user has effectively totally separate Thunderird accounts and passwords.
* See http://windows.microsoft.com/en-gb/windows/create-user-account#create-user-account=windows-7

Install Oracle XE, SQL Developer, and Toad on the same machine?

I have been trying to install Oracle SQL Developer, Toad, and Oracle Express on my work computer. Installing SQL Developer and Toad was pretty straightforward, and I was able to browse the XE database with SQL Developer. But after installing Toad, problems started. Toad was using Oracle XE's registry settings to locate ORACLE_HOME and oci.dll. So I tried changing the settings for Oracle XE in the registry. Toad now works, but not Oracle XE. And while I was going through this all, I even had a time when I had Toad and oracle xe working, but not SQL Developer. It almost looks like you can choose two of the products, but not all three.
So, my question to the community at large is "Can it be done?". In what directories do you have each product installed? What environment variables do you have set? Where is your tnsnames.ora? What Oracle registry settings do you have set (namely HKLM\SOFTWARE\Wow6432Node\ORACLE\KEY_XE)?
I can post my current settings, but I've been through so many iterations that these current settings don't really matter that much.
Here are the details I am looking for
Path to sqldeveloper.exe
Path to oracle.exe (for Oracle XE)
Environment Variables
ORACLE_HOME
ORACLE_BASE
TNS_ADMIN
PATH (just the oracle stuff)
Registry Settings
HKLM\SOFTWARE\Wow6432Node\ORACLE\KEY_XE\ORACLE_HOME
HKLM\SOFTWARE\Wow6432Node\ORACLE\KEY_XE\ORACLE_BASE
HKLM\SOFTWARE\Wow6432Node\ORACLE\KEY_XE\TNS_ADMIN
HKLM\SOFTWARE\Wow6432Node\ORACLE\KEY_XE\OLEDB
HKLM\SOFTWARE\Wow6432Node\ORACLE\KEY_XE\ORAMTS_CP_TRACE_DIR

I don't use toad, but there should be no reason why you can't install all 3. SQL Developer is a very clean install and affects nothing else. It doesn't add to the path, or create any registry entries except for file associations.
A toad installation should pick up your oracle client (in this case the XE code). I am curious as to why you felt you had to change registry settings. What problem were you trying to fix?
My recommendation would be to uninstall everything, clean the registry and reinstall in the order XE, Toad, SQL Developer. Test in between installations and seek help for problems as you find them. Bear in mind that this is the forum for SQL Developer. QUestions about Oracle XE would be better answered in the dedicated forum, or in the Installation forum, and questions about Toad in a toad forum.

Installing Oracle 9i Database and 9iAS on the same machine

Similar Messages

Maybe you are looking for