Installing Oracle 9i database on Red Hat Linux 7.1

Hi,
I have downloaded Linux9i_Disk1.gz, Linux9i_Disk2.gz and Linux9i_Disk3.gz for installing Oracle 9i database on Red Hat Linux 7.1. I unzipped those files to Linux9i_Disk1.cpio, Linux9i_Disk2.cpio and Linux9i_Disk3.cpio. What is the command to extract these .cpio files to get all the associated files that are archived? Can anyone help me on this?
Warm Regards,
Manash Pradhan

Thanks a ton. I am sorry for not checking the download page since the download was done by another person.Thanks again.
Warm Regards,
Manash

Similar Messages

Installing Oracle 9i database on Red Hat Linux

I could successfully download the three disks required for installing Oracle 9i Database in .gz format. I used gunzip to extract those three files to .cpio format. How can I further extract the .cpio files? What should I do next?Please guide me.
Warm Regards,
Manash Pradhan

You can unpack using cpio(1) i.e. 'cpio -idcmv < filename'
When you finish unpacking, you will have three directories
i.e. 'Disk1' 'Disk2' ...
cd Disk1
./runInstaller

How to install Oracle 10g on to Red Hat Linux 5 Server

I'm new to both Linux and Oracle. I've been working on an installion of Oracle 10g on a Red Hat Linux 5 Server for about 2 weeks. I've been doing a lot of reading about installing Oracle on a Linux environment. I finally got to the installation portion and the Oracle Installer displayed a message that I had to have Red Hat 4 or 4 Enterprise to continue.
How can Install Oracle 10g onto a Red Hat 5 Linux Server"? Is there an option that I can use to bypass the OS checking?
Thanks

Unfortunately there is no way to access metalink without a valid account. You could then just try to skip preinstall requisites with this clause:
./runInstaller -ignoreSysPrereqs
or this method:
Copy the oraparam.ini from the installation source install/oraparam.ini to /tmp directory.
Edit the file /tmp/oraparam.ini so this file reads:
After
[Certified Versions]
Linux=redhat-3,SuSE-9,redhat-4,UnitedLinux-1.0,asianux-1,asianux-2,redhat-5
also, make sure you have these packages installed:
# rpm -ivh gcc-c++-4.1.1-52.el5.i386.rpm gcc-4.1.1-52.el5.i386.rpm
libstdc++-devel-4.1.1-52.el5.i386.rpm glibc-devel-2.5-12.i386.rpm
glibc-headers-2.5-12.i386.rpm libgomp-4.1.1-52.el5.i386.rpm
libXp-1.0.0-8.i386.rpm compat-libstdc++-296-2.96-138.i386.rpm
compat-libstdc++-33-3.2.3-61.i386.rpm
~ Madrid.

How to install and configure ASM on Red Hat Linux 6.4

Hi Team,
How do you install and configure ASM on Red Hat Linux 6.4?
Thank you in advance.
Bee

Here is an article that you may find useful http://eriglen.blogspot.com/2013/01/step-by-step-configuring-automatic-storage-management-on-standalone-server-with-oracle-enterprise-linux-and-oracle-11g-R2-using-external-storage-managed-by-openfiler.html

Install Oracle8.1.7 on Red Hat Linux 9

I tried to install Oracle8.1.7 on Red Hat Linux 9 and got error message:
Unable to initialize threads: cannot find class java/lang/Thread
Could not create Java VM
My env variables:
THREAD_FLAG=native
LANG=en_US.UTF-8
CLASSPATH=/usr/local/jre/lib/rt.jar:/usr/jdk118/jdk118_v3/lib/classes.zip
DISPLAY=:0.0
Please help.

I did export LD_ASSUME_KERNEL=2.4.1. Now the installation starts and I get
[oracle@localhost Disk1]$ ./runInstaller
Initializing Java Virtual Machine from ../stage/Components/oracle.swd.jre/1.1.8/1/DataFiles/Expanded/linux/bin/jre. Please wait...
and then get back to the $prompt after some time and the welcome screen never comes up.
Whats wrong?

How to install oracle developer 10g on red hat 5.3

Dear forum members,
i have to install oracle developer 10g on red hat 5.3 . I am searching on google and metalink but i did not find any doccument.
If somebody has some material or any doccument for this Installation plz help me.
regards

i have fullfilled pre-requisites to install developer 10g on red hat 4.5
i copy the source in "/var/opt/oracle/" Source is in .cpio format.
i unzip this source with cat Disk1.cpio | cpio -icd.
when i run the runINstaller it cant find /var/opt/oracle/..........Disk1/products.xml file.
when i find this file with command find -name 'products*' or find -name '*.xml'
i cant find products.xml.
is there any problem with source
reply

Oracle 8i/9i and Red Hat Linux version

Hi,
Does anyone know, which is the earliest version of Red Hat Linux
supported by Oracle 8i or 9i?
Regards

Hi,
I downloaded the 9i, the installation started ok and I was
able to complete the install procedure, but a few things did not
go as I planned:
1.- The installation MUST be run on the console X, and cannot
be run from a remote terminal (odd!).
2.- On a 2-CPU machine the installation didn't install all the
files for the sistem to start.
3.- During a second attempt the installer issued an error
regarding a compilation problem.
Can anyone help me, I can't get the installer running without
problems.

Oracle 9i installation on Red Hat Linux 9 URGENT

hi,
I live in london, I have tried a lot to install Oracle 9i Enterprise edition on Red Hat Linux 9, but couldn't do it, can any one help me to install it, I am ready to pay and visit any place in london for that purpose in the evening, if any one can help my mobiel number 07832 077672
best regards
asif

If you are only trying to learn, I would recommend either Fedora FC4 or OpenSuSE 10, and I would recommend installing ORacle Express Edition if you do not need advanced Oracle stuff (or you are not learning for OCP).
Again, use Werner's excellent site - http://www.puschitz.com or Ivan Kartik's site - http://ivan.kartik.sk/oracle/install_ora9_fedora.html to get good instruciton on installation.
If you want a free version that is as close to a supported Linux as legally possible, consider using WhiteBoxLinux.org, TaoLinux.org or CentOS.org linux. These are clones of RedHat Enterprise (the one that is supported). Or you could contact Novell.com and ask for an evaluation kit for SLES9.

Oracle 10g Installation on Red Hat Linux

Hi
I am trying to install Oracle 10g (Downloaded from Oracle Site) in a Linux Installation. I have checked with the following command about the Linux Version
# cat /etc/issue and the output is :
Red Hat Linux Release 7.1 (Seawolf)
Kernel 2.4.2-2 on an i686
Then I am giving #uname -r and the output is
2.4.2-2
Now Oracle Installation Guide for 10g for Linux is saying that
if the errata level is less than 25 on x86 system then install latest Kernel Updates.
Please Let me know from where I can get the Latest Kernel Updates appropriately and what I need to do to put that patch into Linux so that I can smoothly install the Oracle 10g.
Thanks and regards.
Keshav Tripathy

Jer is absolutely right.... just changing the values in oraparm.ini to reflect your kernel distribution will work for you.
For example the file contains:
[Certified Versions]
Linux=redhat-2.1,UnitedLinux-1.0,redhat-3
now to add your linux into it just check your version by issuing the command #uname -r
in my case the output was "2.4.20-8smp". I just appended redhat before this value and entered in the oraparm.ini file.
The new ini file looks like:
[Certified Versions]
Linux=redhat-2.1,UnitedLinux-1.0,redhat-3,redhat-2.4.20-8smp
[Linux-redhat-2.4.20-8smp-optional]
TEMP_SPACE=80
SWAP_SPACE=150
MIN_DISPLAY_COLORS=256
Now you are all set to install. I assume that all other pre-requisites have been fulfilled.
Thanks & Regards,
Rajesh Kumar
Team Lead UNIX

Oracle 8i Internet for Red Hat Linux

Hi all,
Can any one help me on this. I have setting up Red Hat Linux 6.2 and JRE 1.1.6v5-glibc also installed on /usr/local/jre directory. But when I try to run "runInstaller" from the oracle cdrom. I have the following error:
Initializing Java Virtual Machine from /usr/local/jre/bin/jre Please wait ...
Error in Create OUIProcess(): -1
:Bad address
Any one can tell me what is the problem.
Thank you

Let me try again. I was to fast with the enter key. There is a known bug with the installer. The work around is to use the runInstall.sh that is in the subdirectory /install/linux. If you have your environment variables setup correctly this should work, also you need a minimum of 128 meg of ram on the machine.
Hope this helps.
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by hhtham ():
Hi all,
Can any one help me on this. I have setting up Red Hat Linux 6.2 and JRE 1.1.6v5-glibc also installed on /usr/local/jre directory. But when I try to run "runInstaller" from the oracle cdrom. I have the following error:
Initializing Java Virtual Machine from /usr/local/jre/bin/jre Please wait ...
Error in Create OUIProcess(): -1
:Bad address
Any one can tell me what is the problem.
Thank you<HR></BLOCKQUOTE>
null

Help with installing pre-requisite packages on Red Hat Linux

Having issue with installing packages with yum
OS is RHEL 6 and following package which are prerequisites for Oracle Fusion Middleware install on Red Hat Linux 6
uname details as follows
2.6.32-220.el6.x86_64 #1 SMP Wed Nov 9 08:03:13 EST 2011 x86_64 x86_64 x86_64 GNU/Linux
Example error: yum install gives error as follows for all packages.
No package compat-libcap1-1.10-1 available
Need to install following packages (as mentioned in the prerequisites)
binutils-2.20.51.0.2-5.28.el6
compat-libcap1-1.10-1
compat-libstdc++-33-3.2.3-69.el6 for x86_64
compat-libstdc++-33-3.2.3-69.el6 for i686
gcc-4.4.4-13.el6
gcc-c++-4.4.4-13.el6
glibc-2.12-1.7.el6 for x86_64
glibc-2.12-1.7.el6 for i686
glibc-devel-2.12-1.7.el6 for i686
libaio-0.3.107-10.el6
libaio-devel-0.3.107-10.el6
libgcc-4.4.4-13.el6
libstdc++-4.4.4-13.el6 for x86_64
libstdc++-4.4.4-13.el6 for i686
libstdc++-devel-4.4.4-13.el6
libXext for i686
libXtst for i686
FYI: If this forum is not appropriate please let me know appropriate forum and shall repost there.

Hey,
Normally I use YUM : http://taliphakanozturken.wordpress.com/2012/03/17/how-to-use-yum-to-install-rpm-packages-with-dependencies/
Let me know if this is what are you looking for.
I hope it helps you,
Thiago Leoncio.

Download oracle 11g/10g for red hat linux

hi,
I have installed VM WARE on my laptop now want to download linux ISO and Oracle ISO.
could you please tell me whcih linux version i have to install which support oracle for linux.
from where i get that
-linux installation files
-oracle installation files
both the above will install on oracle vm ware
thanks
Edited by: hard_stone on Sep 30, 2009 11:33 PM

hard_stone wrote:
hi,
I have installed VM WARE on my laptop now want to download linux ISO and Oracle ISO. Red Hat, Centos and Oracle Enterprise Linux are almost identical. The major differences are:
- Red Hat and Oracle Enterprise Linux are officially supported by Oracle to be used under Oracle products;
- CentOS is NOT officially supported
- the newer Oracle Enterprise Linux (OEL) includes an 'oracle-validate' rpm to reduce configuration guessing
Each Distro has it's purpose. I use SUSE and OpenSUSE for my office. And for general servers I use RedHat (when I need commercial support) and CentOS. I fully support CentOS and the CentOS community effort.
However, for the past year I have ONLY used Oracle Enteprise Linux under Oracle product. It is free, it is officially supported, if I need commercial support I can get it, and it has the Oracle Validated RPM to minimize my config effort. http://edelivery.oracle.com
So, as compared to the other respondent - I encourage using OEL and NOT CentOS.

Installing oracle 10g R2 on Red Hat AS4 update 6

Has anyone been able to get 10g R2 to install on Red Hat AS 4 u6?
I have had errors on both the 64 bit version and the 32 bit version.
32 Bit Version
The 32 bit version useing the 32 bit version of oracle 10g r2 (10.2.0.1) displays this error: Enterprise manager configuration failed due to the following error - Invalid value null for parameter PORT.
The log states:
CONFIG: SQLEngine connecting with SID: murasaki, oracleHome: /opt/oracle/product/10.2.0/db_1, and user: DBSNMP
May 2, 2008 8:56:11 AM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
May 2, 2008 8:56:11 AM oracle.sysman.emcp.EMConfig perform
SEVERE: Invalid value null for parameter PORT
Refer to the log file at /opt/oracle/product/10.2.0/db_1/cfgtoollogs/dbca/murasaki/emConfig.log for more details.
May 2, 2008 8:56:11 AM oracle.sysman.emcp.EMConfig perform
CONFIG: Stack Trace:
oracle.sysman.emcp.exception.EMConfigException: Invalid value null for parameter PORT
at oracle.sysman.emcp.ParamsManager.checkParam(ParamsManager.java:2630)
at oracle.sysman.emcp.EMDBPreConfig.checkConfigParams(EMDBPreConfig.java:1285)
at oracle.sysman.emcp.EMDBPreConfig.checkParameters(EMDBPreConfig.java:1060)
at oracle.sysman.emcp.EMDBPreConfig.invoke(EMDBPreConfig.java:174)
at oracle.sysman.emcp.EMDBPreConfig.invoke(EMDBPreConfig.java:160)
at oracle.sysman.emcp.EMConfig.perform(EMConfig.java:141)
at oracle.sysman.assistants.util.em.EMConfiguration.run(EMConfiguration.java:426)
at java.lang.Thread.run(Thread.java:534)
64 Bit version
The 64 bit versions spits out unable to make "install" various different files anywhere between 62% to 68% completed.
unfortunately i dont have more information on the error at this time. I have all the development packages installed.
any help would be greatly apreciated as i am getting no where with google and searching various forums.

Please check on this link.. that may help you.
http://www.puschitz.com/InstallingOracle10g.shtml
--Girish

Hi, i want to install oracle 10g on RHEL5(Red hat) where i can get softwar

i want to install oracle 10g on redhat5 pls some one tell me where i can get oracle software.

Hi;
1. As Paul mention open http://www.oracle.com/technetwork/database/10201linuxsoft-097986.html
2. Accept license aggrement
3. As Prabhu mention Prabhu
Download the Complete Files
10201_database_linux32.zip (668,734,007 bytes) (cksum - 2737423041)
use some downloder manager like flashget etc.
Regard
Helios

Oracle 8i installation with Red Hat Linux 6.2

Hi
Please help us in solving the below mentioned problem.
We are trying to install Oracle 8.1.7 under Linux 6.2 . During the installation the following error displays and could not able to finish the instllation. The problem is
Error in invoking target ntcontab.o of makefile /usr/local/u01/app/oracle/product/8.1.7/network/lib/ins_net_client.mk
If any has a soln for this please reply to us. Thanks in advance
regards
Santhosh
null

Miguel Tsuboyama (guest) wrote:
: Pinwu Xu (guest) wrote:
: : Terry (guest) wrote:
: : : Hi,
: : : I am still stuck on DISPLAY error.
: : : The messages I get when I issue ./runInstaller command are:
: : : Initailizing Java Virtual Machine from
: /usr/local/jre/bin/jre
: : : Please wait...
: : : Xlib: connection to "QIS:0.0" refused by server
: : : Xlib: Invalid MIT-MAGIC-COOKIE-1 KEY
: : : Java.lang.Internal Error: can't connect to X11 window
server
: : : using 'QIS:0.0' as the value of the DISPLAY variable
: : : QIS is the server name that I am installing Oracle to.
: : : The manual says I should set it to
: : : DISPLAY=work_station_name:0.0
: : : export DISPLAY
: : The work_station_name is the name of the machine the monitor
: : you are facing to connects to, with X Window running. If
: : you have only one machine, simply typing
: : export DISPLAY=:0
: : suffices.
: : Hope this helps.
: : : but I don't have any workstations connected to the linux
box
: : : yet. I am installing oracle to a standalone machine. What
: is
: : : that work_staion_name supposed to be? Obviously using the
: : server
: : : name as work station name didn't do me any good.
: : Pinwu
: You must grant permission to connect to the XServer...
: If you XServer was started by root, you must grant from root
the
: permission via: xhost +localhost
: Regards,
: Miguel T.
Hi Terry,
I initially experienced the same "connection refused" message as
you from xlib when performing a local installation using GNOME.
My problem was to do with logging on to X as root (to mount the
CDROM) and then switching to the oracle account to do the
install.
If I logged to X as oracle I didn't need to change the default
DISPLAY value of :0 .
Daniel.
null

Installing Oracle 9i database on Red Hat Linux 7.1

Similar Messages

Maybe you are looking for