Installing Oracle 9i on Win Server 2008

Hello all,
I just wanted to know that is it possible to install Oracle 9i on Windows Server 2008.. is it supported on server 2008..
i surfed the internet to get more information about this and what i got was that Oracle 9i is not supported on 2008..
is it so... and that means i need to install higher version of Oracle on Windows Server 2008.. ??
Thanks & Regards
Pratik Lakhpatwala
Jr Oracle DBA

Pratik,
I am just copy the reply by Sybrand Sir :
Oracle 9iR2 was desupported on July 31,2007
Windows 2008 was released in 2008.
Oracle never (re-) certifies for new versions of any O/S
Please upgrade to Oracle 10gR2 (preferred) or downgrade your server to XP or 2003.
Sorry, but you have no other choice.
From this link:
Re: oracle 9i not installing on windows 2008 server
Regards
Girish Sharma

Similar Messages

Pleae help me: I want to install oracle developer on win server 2008

please help me i am try to install oracle developer 10g on win server 2008 but failed because the version of operating system not 5 or 5.1 or 5.2 and it is 6
so i want to install oracle developer 11g on win server 2008 but i am not found oracle developer 11g to download it
please any one help me to solve this problem or help me to find oracle developer 11g
Thank you

Oracle Developler 11g is now called Oracle Fusion Middleware (FMw) 11g and can be downloaded from the Oracle Fusion Middleware Downloads page. You have to download and install WebLogic Server (WLS) 10.3.3 first, then scroll down and download and install Portal, Forms, Reports and Discoverer (11.1.1.3.0).
When you install WLS, make sure you do not run the configuration step. When you install FMw, it will configure the WLS as part of it's configuration step.
Hope this helps,
Craig B-)
If someone's response is helpful or correct, please mark it accordingly.

I am trying to install Oracle 9i on Windows Server 2008

Hi
I am trying to install Oracle 9i on Windows Server 2008.
While installing third CD it shows the following error message
"jrew.exe has stopped working"
Please guide me what to do next as early as possible.
Thanks

Why?
The general policy of Oracle is very simple:
it certifies against the current version of the OS.
It never re-certifies against new releases of the OS.
Windows 2008 didn't exist when Oracle 9i was released.
Sybrand Bakker
Senior Oracle DBA

Installing Oracle 10g on Windows Server 2008

Hi,
I want to install Oracle 10g on Windows Server 2008. As per Oracle, I should install 10.2.0.3 and then apply patchset 10.2.0.4.
For that, one has to sign in to metalink which is possible only for customers. I am
using Oracle only for educational purposes for now. Is there any other way of using Oracle 10g on Windows 2008?
Thanks,
Vladi

Of course if you don't have support and for educational purpose only , you should compromise a little by either install other OS or get virtual machine like VMware.
Or stay with 10.2.0.3, that should work in most cases.

Installing Oracle 8i in Windows Server 2008 32

Hi! I'm installling Oracle 8i in Windows server 2008 enterprise for 32 bits, but it's finish with error. The error is jrew.
Somebody can install it?
Sorry by my english.
Thank!
Abel

Oracle 8i on windows server 2008 is not a tested/supported product.

How to install oracle 10g in windows server 2008

I want to install oracle 10 (10.2.0.4.0) in windows server 2008 R2 X64 bit version.
Previously i have test this successfully. But not it's giving an error during the installation
Enterprise manager configuratio failed due to the following error-
Error starting Database Control
Refer the log file at (path).....\emConfig.log for more details.
You can retery configuring this database wlth Enterprise Manager later by manually running (path).....\bin\emca script.
I tried to start the service manually from services. But it didn't work.
I tried to run that script using command prompt. but nothing happened.
in my start menu under oracle home db-console link also not there.
here is my log file
Feb 7, 2011 11:54:08 AM oracle.sysman.emcp.util.PlatformInterface executeCommand
CONFIG: Enter Enterprise Manager Root Password :
************Certificate was added to keystore
Certificate reply was installed in keystore
Feb 7, 2011 11:54:08 AM oracle.sysman.emcp.util.FileUtil printFileToLog
CONFIG: Printing file(After Secure DBConsole): D:\oracle\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole_AX-2009_AX2009\config\http-web-site.xml
<?xml version = '1.0' standalone = 'yes'?>
<!DOCTYPE web-site PUBLIC "OracleAS XML Web-site" "http://xmlns.oracle.com/ias/dtds/web-site-9_04.dtd">
<web-site port="1158" display-name="OC4J Java HTTP Web Site" secure="TRUE">
     
     <default-web-app application="default" name="defaultWebApp"/>
     <web-app application="default" name="dms0" root="/dms0"/>
     <web-app application="default" name="dms" root="/dmsoc4j"/>
     <web-app application="em" name="em" load-on-startup="true" root="/em" shared="true" />
     
     <access-log path="../log/http-web-access.log"/>
     
     <ssl-config needs-client-auth="false" keystore="D:\oracle\product\10.2.0\db_1/oc4j/j2ee/OC4J_DBConsole_AX-2009_AX2009/config/server/keystore.test" keystore-password="BC062AD3D852A5B5D02E979B69DD12B3" />
</web-site>
Feb 7, 2011 11:54:08 AM oracle.sysman.emcp.util.DBControlUtil secureDBConsole
INFO: Database Control secured successfully.
Feb 7, 2011 11:54:08 AM oracle.sysman.emcp.EMDBPostConfig performConfiguration
CONFIG: Securing Database Control completed successfully .
Feb 7, 2011 11:54:08 AM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Feb 7, 2011 11:54:08 AM oracle.sysman.emcp.util.DBControlUtil startOMS
INFO: Starting Database Control (this may take a while) ...
Feb 7, 2011 11:54:08 AM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: cmdType: 0
Feb 7, 2011 11:54:08 AM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Starting Windows service...OracleDBConsoleAX2009
Feb 7, 2011 11:54:08 AM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleAX2009' to fully start
Feb 7, 2011 11:54:18 AM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleAX2009' to fully start
Feb 7, 2011 11:54:28 AM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleAX2009' to fully start
Feb 7, 2011 11:54:38 AM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleAX2009' to fully start
Feb 7, 2011 11:54:48 AM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleAX2009' to fully start
Feb 7, 2011 11:54:58 AM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleAX2009' to fully start
Feb 7, 2011 11:55:08 AM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleAX2009' to fully start
Feb 7, 2011 11:55:18 AM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleAX2009' to fully start
Feb 7, 2011 11:55:28 AM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleAX2009' to fully start
Feb 7, 2011 11:55:38 AM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleAX2009' to fully start
Feb 7, 2011 11:55:48 AM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleAX2009' to fully start
Feb 7, 2011 11:55:48 AM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Initialization failure for service during start
Feb 7, 2011 11:55:48 AM oracle.sysman.emcp.EMConfig perform
SEVERE: Error starting Database Control
Refer to the log file at D:\oracle\product\10.2.0\db_1\cfgtoollogs\dbca\AX2009\emConfig.log for more details.
Feb 7, 2011 11:55:48 AM oracle.sysman.emcp.EMConfig perform
CONFIG: Stack Trace:
oracle.sysman.emcp.exception.EMConfigException: Error starting Database Control
     at oracle.sysman.emcp.EMDBPostConfig.performConfiguration(EMDBPostConfig.java:646)
     at oracle.sysman.emcp.EMDBPostConfig.invoke(EMDBPostConfig.java:224)
     at oracle.sysman.emcp.EMDBPostConfig.invoke(EMDBPostConfig.java:193)
     at oracle.sysman.emcp.EMConfig.perform(EMConfig.java:184)
     at oracle.sysman.assistants.util.em.EMConfiguration.run(EMConfiguration.java:436)
     at java.lang.Thread.run(Thread.java:595)
please if any one can give me any solution to run my database console. i don't know any method. i'm new to the oracle.
Thank you

I have checked that. but i also say that oracle 10g (10.2.0.4 ) support for windows server 2008 r2 X64.
Windows Server 2008 x64
Oracle Database 10g Release 2 (10.2.0.4 or later) for Windows x64 is certified on Windows Server 2008 x64 (all editions). 32-bit Oracle Database Client (10.2.0.4) and higher versions are supported on Windows Server 2008 x64.
I don'y think it's problem of os version or oracle version. Because when we purchase we asked from them what is the recommended version for our os. they told that 10g 10.2.0.4 is ok. previously i have installed this successfully. But now i can't.
however thanks for tried to help me. if u can find out any other reason\s please late me know..
thank you very much.

Installing oracle 8i on windows server 2008

hi all,
is it possible to install oracle 8i database standard edition on windows 2008 server?
i'm starting the instalation and almost in the end of it when it suppose to ask me to configure net8 it freez.
i have tns error ora- 12560 TNS-protocol adapter error
i'll be glad if anybody has answers,

I wouldn't have a clue whether it is possible. Want to ask a different question? Whether if you ever succeeded it would be supported or stable? The answer is No.
Oracle 8i is so old it hasn't been supported during the current decade, the current century, the current millennium.
If you are going to install anything do not go further back than 10.2.0.4 or you are just wasting your time.

Which JRE version to install on 64bit OS (win server 2008)

Hello everyone
I'm not sure what Java and JCO versions / releases to install on a Windows Server 2008 Standard 64bit Edition. We're installing Edge BI 3.1... apparently this is 32bit Software. I understand that we need to install JCO 2.1.9. Normally I prefer to install 64bit versions of a software on a 64bit OS.
In the JCO 2.1.9 installation preliminaries I read:
The SAP Java Connector (JCo) 2.1.9 requires a Java Runtime Environment (JRE) version 1.3 or 1.4. The 64-bit JCo versions need a 64-bit JRE version 1.4. Please see SAP note 549268 for a current and detailed list of supported platforms and Java runtime environments.
Unfortunately I can't find a 64bit JRE version 1.4... just a 32bit JRE 1.4.2_19 version. Furthermore this Java version is end of life. See http://www.oracle.com/technetwork/java/javase/download-138376.html.
So question is: what versions exactly for JCO 2.1.9 (32 or 64 bit) and JRE should I install?
Thanks for some clarification in advance to anyone!
Renaud
EDIT:
According to [this|Re: BOE SAP integration kit issue - Java connector] posting it seems that it is required to install the 32bit version of JCO 2.1.9

Actually, this problem is only partially solved. I still get "Can't connect to local MySQL server through socket '/var/mysql/mysql.sock..." when I type 'mysql'. I can access mysql by typing 'sudo mysql', but still get the socket error when connecting via php, so I think I still need to get to the point where I can type mysql without sudo.
Also, I went ahead and installed MySQL 5 with the tar package.
Message was edited by: rabbitdog

How to install Oracle Instantclient on Windows Server 2008 Web Edition

I am trying to install the Oracle Instantclient on our Windows Web server (x64).
* I downloaded instantclient-basic-win-x86-64-11.1.0.7.0
* Extracted to c:\instantclient
* appended the directory to the path
* created system variable 'SQL_PATH' with same path
* gave everyone all rights to the instantclient folder
* gave network service explicitly all rights to the instantclient folder
* rebooted IIS
* rebooted the server
But still my application keeps returning with System.Data.OracleClient requires Oracle client software version 8.1.7 or greater.
What am i missing/doing wrong? It seems i have mixed and merged all possible solutions which Google would return.

Since System.Data.OracleClient is a Microsoft library, you'd better ask them.
Or use Oracle's provider:
http://www.oracle.com/technology/tech/windows/odpnet/index.html
Yours,
Laurenz Albe

Problem Installing EM Cloud control 12c in Win Server 2008

Hi All,
I having problem installing the EM in win server 2008 64bits. I already installed java run time but when i click on the setup.exe in the disk 1 after unzip it does not show the installation wizard and any error message. Did i miss out something? do i need to create the user group and user as stated in the installation guide as stated in this link Installing Enterprise Manager System - 12c Release 1 (12.1.0.1)?

Hi, can you open an SR for this issue and share the number. Lets check few basic things:
a) can you make sure that all the zips are downloaded from OTN have correct byte and checksum information
b) Can you make sure that you unzipped all these zips files in a single folder ?
c) After unzipping can you check if you have following folders created ( not these folder are for linux but they will be same on windows) -
install      libskgxn      plugins     response     stage     WT.zip
jdk     oms     runInstaller      wls
d) Can you invoke setup.exe -debug
then look at the logs from -
C:\Users\aime\AppData\LocalTemp\2\OraInstall2013-07-09_04-10-59AM   ( for windows it will be orInstaller.err and log )
You donot need any user group or any thing created.

Oracle R12 on Windows Server 2008

Hi - does anyone have a good guide or link to a site that does a walk through of installing Oracle R12 on Windows Server 2008?
Thanks!

Hi,
Thanks for the guide, anyone with experience in Windows, do you know if the Server goes to sleep, that once it is woken up, that the R12 instance would work fine? I think the application will not be accessible when the server does to sleep.
I would ideally like to let the Server go to "Sleep" when not in use. Once a user wants to test something, they can wake it up using WOL, then login to the instance.What is the point of letting the server goes to sleep? I would say that you may need to bounce some services then which is not a feasible solution -- You may verify this and try it yourself.
Regards,
Hussein

How to Reactivate RDS TS in Win Server 2008 R2

Good Day,
I had installed Citrix XenApp on Windows Server 2008 R2 Stnd. I formatted the Server with fresh Win server 2008 R2 Stnd: and activate it with existing licences.
1: I have installed XenpApp and activate it.
2: When i tried to activate CALS with License IDs then i got message "It is already Activated" problem is that i did not deactivate first when i was going to format. i should had to deactivate but forgot.
Is there any way to reactivate the CALs or deactivate and active ????
Regards,
I.A.H

Hi,
Please contact the Clearinghouse, explain to them that you forgot to Deactivate the old server before wiping it and are now having a problem re-installing your CALs on your new server, and they will assist you. Please have your authorization number,
license number, agreement number, original paperwork, emails, etc., ready when you call.
Locate the Microsoft Clearinghouse Telephone Number for Your Country or Region
http://technet.microsoft.com/en-us/library/cc754874.aspx
Thanks.
-TP

Installing Weblogic 12c on windows server 2008

Trouble installing Weblogic 12 on windows server 2008 ,i have oracle 11g databse in the same system.Now i am trying to install Oracle Weblogic 12 ,but WLS requires JDK 1.6 as a minimum ,after i install the Oracle11g database it automatically installed the Jdk 1.5 ..now how can i go about and install Weblogic 12 .

install JDK 6 or 7. Load the environment variables from CMD.EXE
set JAVA_HOME = RUTA_DEL_JDK_6_OR_7
set PATH =%JAVA_HOME%\BIN;% PATH%
Then, from the same terminal (cmd.exe) run the weblogic runInstaller.exe 12c.

ORA-12560 on win server 2008 R2

I have an oracle DB 11.2 running on win server 2008..
I can connect to a DB, but when I need to make some changes locally, it's not possible.
so:
- the DB and listener are running as a local system account
- I'm loggin into as a local admin (Administrator/pwd)..
- ORACLE_SID has been set in Control Panel --> system (for all users)
- tnsping locally is running OK
- lsnrctl status LISTENER returns no error
- sqlnet.ora has been set:
SQLNET.AUTHENTICATION_SERVICES= (NTS)
NAMES.DIRECTORY_PATH= (TNSNAMES)
- there are no remote_listeners
pls, help :)

846417 wrote:
C:\Users\Administrator>sqlplus / as sysdba
SQL*Plus: Release 11.2.0.1.0 Production on Fri Apr 8 16:21:49 2011
Copyright (c) 1982, 2010, Oracle. All rights reserved.
ERROR:
ORA-12560: TNS:protocol adapter errorLet's stick to the 12560.
Is the OracleService<sid> windows service started?
If started, make sure ORACLE_SID (that sqlplus looks up via its registry settings, if not overridden by env) is correct:
C:\Users\Test>set ora
Environment variable ora not defined
C:\Users\Test>set oracle_sid=xe1
C:\Users\Test>sqlplus / as sysdba
SQL*Plus: Release 11.2.0.2.0 Beta on Fr Apr 8 13:09:52 2011
Copyright (c) 1982, 2010, Oracle. All rights reserved.
ERROR:
ORA-12560: TNS:protocol adapter error
Enter user-name:
C:\Users\Test>set oracle_sid=xe
C:\Users\Test>sqlplus / as sysdba
SQL*Plus: Release 11.2.0.2.0 Beta on Fr Apr 8 13:10:01 2011
Copyright (c) 1982, 2010, Oracle. All rights reserved.
Connected to:
Oracle Database 11g Express Edition Release 11.2.0.2.0 - BetaEdited by: orafad on Apr 8, 2011 1:11 PM
Edited by: orafad on Apr 8, 2011 5:27 PM

Bootcamp Win Server 2008 x64 - No network

I have no networking either wired or wireless with Bootcamp and Windows Server 2008 x64.
I've repaired the drivers from the bootcamp partition on the OSX disk - no change, and uninstalled the device drivers for the ethernet controllers and the Broadcom Wireless 802.11n device in Device Manager, rebooted, windows wasn't able to install the drivers.
Does anyone know where I can download the x64 drivers, for the Broadcom Wireless 802.11n
Both the wired and wireless work Ok under OSX with all updates installed.
Any help would be greatly appreciated.
Thanks
Syl
MacPro 2 x 2.93GHz Quad-Core Intel Xeon
AirPort Extreme Wi-Fi Card-INT

I had the same problem but I came up with a solution. Since I was following some instructions on using Win server 2008 as a workstation I saw that it mentioned downloading Everest Ultimate Edition (trial version worked) to find out what the hard ware was that needed a driver. When I did this I saw that the network device was listed as a Intel 82574L. After finding the name of the hardware I went to "computer management" and clicked on "device manager." From there I double clicked on the network device, clicked on the reinstall driver; from there browse for driver software & let me pick from a list. Select network adapters - intel - and then on the Intel 82574L. Once it installed the network came right up. Hope that helps you out & good luck!

Installing Oracle 9i on Win Server 2008

Similar Messages

Maybe you are looking for