Installing Oracle 9i release2 on RH Linux Ent 4
Dear Members,
Is there any good docs on installing Oracle 9i rel 2 on
RH Linux enterprise edition 4. .
What are the minimum software and hardware requirements.What problems i may face.What min RAM and hard disk needed ??
Need a step by step guide on the issue.
Also will the same doc suffice for installing on Fedora core 2/3/4 .
Not getting the right doc. pl. help..
regards,
Hi,
Please check this URL:
http://www.puschitz.com/InstallingOracle9i.html
Thanks,
VCP.
Similar Messages
-
Problem installing Oracle 8.05 on Redhat Linux 7.1
I am currently trying to install Oracle 8.05 onto Redhat Linux 7.1. I can get part of the way through
the installation, however, when it is installing the rdbms portion. I stops with an error about a failure
during relinking. Here is the part of make.log which details what really happened. Could someone tell
me how to proceed.
Thank you,
Nicholas Waltham
--------------[ rdbms.ins 2618 ]---------------------------------------------
Action: Installing install.
Command: (make -f ins_rdbms.mk ORACLE_HOME=/opt/oracle/home install), Out=/opt/oracle/home/orainst/make.log, Err=/opt/oracle/home/orainst/make.log
chmod 755 /opt/oracle/home/bin
rm -f oracle exp imp sqlldr tkprof mig dbv tstshm maxmem orapwd dbfsize cursize rman genoci svrmgrl extproc ihsalloci ihsots ihsdepxa ogms ogmsctl osh sbttest /opt/oracle/home/rdbms/lib/ksms.s /opt/oracle/home/rdbms/lib/ksms.o
echo " - Linking Oracle " ;\
/opt/oracle/home/bin/echodo cc -L/opt/oracle/home/lib/ -L/opt/oracle/home/rdbms/lib -o /opt/oracle/home/rdbms/lib/oracle /opt/oracle/home/rdbms/lib/opimai.o /opt/oracle/home/rdbms/lib/ssoraed.o /opt/oracle/home/rdbms/lib/ttcsoi.o /opt/oracle/home/rdbms/lib/config.o \
-lserver -lclient -lvsn -lcommon -lgeneric \
/opt/oracle/home/rdbms/lib/defopt.o /opt/oracle/home/lib/ncrstab.o -lknlopt \
-lslax -lplsf -lplsb -lextp -lserver -lclient -lvsn -lcommon -lgeneric -lknlopt \
-lslax -lplsf -lplsb -lextp -ldbicx \
/opt/oracle/home/lib/nautab.o /opt/oracle/home/lib/naeet.o /opt/oracle/home/lib/naect.o /opt/oracle/home/lib/naedhs.o `cat /opt/oracle/home/lib/naldflgs` -lnetv2 -lnttcp -lnetwork -lncr -lclient -lvsn -lcommon -lgeneric -lmm -lnlsrtl3 -lcore4 -lnlsrtl3 -lcore4 -lnlsrtl3 -lnetv2 -lnttcp -lnetwork -lncr -lclient -lvsn -lcommon -lgeneric -lepc -lnlsrtl3 -lcore4 -lnlsrtl3 -lcore4 -lnlsrtl3 -lclient -lvsn -lcommon -lgeneric -lnlsrtl3 -lcore4 -lnlsrtl3 -lcore4 -lnlsrtl3 `cat /opt/oracle/home/lib/sysliblist` -ldl -lm -ldl -lnetv2 -lnttcp -lnetwork -lncr -lnetv2 -lnttcp -lnetwork -lncr -lnetv2 -lnttcp -lnetwork -lncr -lnetv2 -lnttcp -lnetwork -lncr -lnetv2 -lnttcp -lnetwork -lncr -lsql -lsql `cat /opt/oracle/home/rdbms/lib/nmliblist` `if ar tv /opt/oracle/home/rdbms/lib/libknlopt.a | grep "kxmnsd.o" > /dev/null 2>&1 ; then echo " " ; else echo "-lmdknl -lmdhh"; fi` \
-lkidt -lnlsrtl3 -lcore4 -lnlsrtl3 -lcore4 -lnlsrtl3 `cat /opt/oracle/home/lib/sysliblist` -ldl -lm -ldl -lnetv2 -lnttcp -lnetwork -lncr -lnetv2 -lnttcp -lnetwork -lncr -lnetv2 -lnttcp -lnetwork -lncr -lnetv2 -lnttcp -lnetwork -lncr -lnetv2 -lnttcp -lnetwork -lncr -lsql -lsql ;
- Linking Oracle
cc -L/opt/oracle/home/lib/ -L/opt/oracle/home/rdbms/lib -o /opt/oracle/home/rdbms/lib/oracle /opt/oracle/home/rdbms/lib/opimai.o /opt/oracle/home/rdbms/lib/ssoraed.o /opt/oracle/home/rdbms/lib/ttcsoi.o /opt/oracle/home/rdbms/lib/config.o -lserver -lclient -lvsn -lcommon -lgeneric /opt/oracle/home/rdbms/lib/defopt.o /opt/oracle/home/lib/ncrstab.o -lknlopt -lslax -lplsf -lplsb -lextp -lserver -lclient -lvsn -lcommon -lgeneric -lknlopt -lslax -lplsf -lplsb -lextp -ldbicx /opt/oracle/home/lib/nautab.o /opt/oracle/home/lib/naeet.o /opt/oracle/home/lib/naect.o /opt/oracle/home/lib/naedhs.o -lnetv2 -lnttcp -lnetwork -lncr -lclient -lvsn -lcommon -lgeneric -lmm -lnlsrtl3 -lcore4 -lnlsrtl3 -lcore4 -lnlsrtl3 -lnetv2 -lnttcp -lnetwork -lncr -lclient -lvsn -lcommon -lgeneric -lepc -lnlsrtl3 -lcore4 -lnlsrtl3 -lcore4 -lnlsrtl3 -lclient -lvsn -lcommon -lgeneric -lnlsrtl3 -lcore4 -lnlsrtl3 -lcore4 -lnlsrtl3 -lnsl -lm -ldl -lm -ldl -lnetv2 -lnttcp -lnetwork -lncr -lnetv2 -lnttcp -lnetwork -lncr -lnetv2 -lnttcp -lnetwork -lncr -lnetv2 -lnttcp -lnetwork -lncr -lnetv2 -lnttcp -lnetwork -lncr -lsql -lsql /opt/oracle/home/rdbms/lib/skgxns.o -lmdknl -lmdhh -lkidt -lnlsrtl3 -lcore4 -lnlsrtl3 -lcore4 -lnlsrtl3 -lnsl -lm -ldl -lm -ldl -lnetv2 -lnttcp -lnetwork -lncr -lnetv2 -lnttcp -lnetwork -lncr -lnetv2 -lnttcp -lnetwork -lncr -lnetv2 -lnttcp -lnetwork -lncr -lnetv2 -lnttcp -lnetwork -lncr -lsql -lsql
/opt/ora cle/home/lib//libplsf.a(spssimb.o): In function `pss_gets':
spssimb.o(.text+0x4ef): the `gets' function is dangerous and should not be used.
/opt/oracle/home/lib//libgeneric.a(skgfr.o): In function `skgfrcre':
skgfr.o(.text+0x4de): the `llseek' function may be dangerous; use `lseek64' instead.
/opt/oracle/home/lib//libserver.a(hoco.o): In function `hoconsi':
hoco.o(.text+0x104d): undefined reference to `__strtoq_internal'
/opt/oracle/home/lib//libserver.a(hoco.o): In function `hoconui':
hoco.o(.text+0x126a): undefined reference to `__strtouq_internal'
collect2: ld returned 1 exit status
make: *** [opt/oracle/home/rdbms/lib/oracle] Error 1
Status: 2
(( OIERR-SYSTEM: make -f ins_rdbms.mk ORACLE_HOME=/opt/oracle/home install ))
--------------[ rdbms.ins 2631 ]---------------------------------------------
null<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Nicholas Waltham ([email protected]):
I am currently trying to install Oracle 8.05 onto Redhat Linux 7.1. I can get part of the way through
the installation, however, when it is installing the rdbms portion. I stops with an error about a failure
during relinking. Here is the part of make.log which details what really happened. Could someone tell
me how to proceed.
Thank you,
Nicholas Waltham
--------------[ rdbms.ins 2618 ]<HR></BLOCKQUOTE>
Well ,I tried to install Oracle 8.0.5 in Debian Potato. At end I desist.
Oracle 8.0.5 works with glibc 5 and Debian Potato with glibc6 .
I guess this is your problem.
There are patches for this but i don't get
to make work.
Sorry for my english.
Cisar -
Problem installing Oracle 9.2 on RedHat Linux 7.1 and 9.0
Hi everyone,
As the subject line says, I tried installing Oracle 9.2 on
RedHat Linux 7.1 and 9.0, strictly following instructions
written by Werner Puschitz
(http://www.puschitz.com/InstallingOracle9i.shtml). Both
attempts failed with identical symptoms:
- the installer asks for Disk 2
- after the disk is inserted, it hangs. It turns out that
kernel is writing messages similar to these in
/var/log/messages:
Jun 16 02:45:19 boston kernel: 16:00: rw=0, want=317696, limit=149920
Jun 16 02:45:19 boston kernel: attempt to access beyond end of device
Unless interrupted, this continues until the /tmp filesystem gets full.
Has anyone experienced this? I haven't been able to find
an explanation so far.
Any help would be much appreciated.
Regards,
Ljubomir ButurovicProviding a thread-bare configuration of your machine on which you are trying to install Oracle on Linux (and mind you - which kernel/distro, coz that's important) would definitely help you elicit more responses to your messages.
-
Error while installing Oracle 9.0.1 on Linux Red Hat.
I am trying to install Oracle 9.0.1 on Linux Red Hat (Enterprise Edt), and getting this long error---
"Initializing Java Virtual Machine From /tmp/OraInstall0/jre/bin/jre. Please wait...
:symbol errno. version GLIBC-2.0 not defined in gile libc.so.6 with link reference (libzip.so) unable to initialize thread: cannot find class java/lang/thread
Could not create Java VM."
Any workaround for the above error.try execute: export LD_ASSUME_KERNEL=2.4.1 before you run ./runInstaller
Btw try look at http://www.puschitz.com for installation guide. -
Install oracle 8.1.7 on linux 9.0
I want to install oracle 8.1.7 on linux 9.0,but where I run ./Disk1/runInstaller,show a error like 'symbol errno,version GLIBC_2.0 not defined in file libc.so.6 where link time reference (libzip.so)
Unable to initialize threads:cannot find class java/lang/Thread
Could not create Java VM'
use rpm ,I discover my glibc's version is:glibc-2.3.2-11.9
Who can help me?
thank you.I have seen this before.
Quick Fix:
The problem with files still named xxxxxO is caused by the install. Sometimes it
works to just copy the file in this case:
$cp lsnrctlO lsnrctl
There are probably other files that were not renamed by the install:
Finally, the listener can run! yipee.. :)
It failed to run because there're some file 'missing'.
I told u before, lsnrctl didn't exist in my box. Well, I found that not only lnsrctl.
There're three more files needed to be renamed. So, total in the list are
dbsnmp, lsnrctl, tnslsnr, and oratclsh.
All of them still have their odd xxxxO name (I should have known it from
the start).
Once I copied all the file to their 'proper' name, the listener can start
successfully. (Though i think the listener need only lsnrctl and tnslsnr,
i still renamed them all).
But I wonder, why does the installer not rename those files?
I found that those file were created normally during installation, until
i run setup_stubs.sh.
Is there any bug on setup_stubs.sh? Why you didn't experience it as I did?
However, the most important things is, the database running well :) -
Unable to install Oracle 9.0.1 on Linux RedHat
Hi,
I am unable to install Oracle 9.0.1 on Linux RedHat, tried many times. While installing i get following errors-
"Error in invoking target install of makefile
/usr/oracle/9.0.1/plsql/lib/ins-plsql.mk"
"error in invoking target ioracle of makefile
/usr/oracle/9.0.1/rdbms/lib/ins-rdbms.mk"
"Error loading native library : libnjni.so"
Installation halts while configuring Net Confugration Assistant....
Any workaround ???
Thanks in advance.There are many versions of RedHat. Your post indicates you are using one of them, but your post really does not give a hint as to which one. Funny thing is - different versions have different install requirements.
I really don't understand why operating system version is such a big secret. Especially since it is logically so critical to installation issue. Even when installing on Windows, the first questions is 'which Windows'.
You have, of course, followed the suggestions at http://www.puschitz.com and noted the errors and workarounds, have you not.
Especially about things like packages and versions. -
Install oracle 8.1.7 on Linux 7.2
I have tried to install Oracle 8.1.7 on Linux 7.2, using ./runInstaller, but nothing happenned. I was expecting to see another window appears, instead the cursor goes back to the prompt. Can you help please as it is urgent. This is the first time I am installing Oracle 8i.Thanks. My email: [email protected]
Read article 159994.1 on metalink also set env for your JAVA_HOME
-
Steps to Install Oracle 11g XE 64 on Linux 14
Hi
Need steps to install Oracle 11g XE on fedora linux 14 on VM ware. I tried methods that are posted but oracle got installed but it is not working need some proper steps to install, I have done the installation on windows its but am new to linux. Please suggest me.
Also please suggest me how to installe oracle 11g Enterprise edition on linux fedora 14.
Thanks
SudhirHi;
1. There are XE dedicate forum site:
Forum Home » Database » Application Express which is XE dedicated forum site.
2. Installation guide can be found at:
http://www.oracle.com/technetwork/products/express-edition/documentation/index.html
Regard
Helios -
I installed Oracle database 10g on SuSE Linux Enterprise Server 8 edition.
I installed Oracle database 10g on SuSE Linux Enterprise Server 8 edition.
But this massage pop up when I used my browser first time before start database.
Actually when I clicks on yes to start database.
The web browser you are using is not optimized for this release of Oracle enterprise manager. It is recommended that you use one of the following:
* Microsoft Internet Explorer version 5.5, 6.0 or higher
* Netscape Navigator version 7 and higher
*Mozilla version 1.3.1 and higher
Dose any one know hoe to upgrade mozilla or install internet explorer 5.5, 6.0 or higher or SLES 8.
Regards,
DYou can download package for your distribution (for example) from http://www.mozilla.org or directly from SuSE ftp server ftp://ftp.suse.com/pub/suse/i386/9.1/suse/i586
IE for linux does not exist. -
Install Oracle 10g R2 RAC on Linux 5.x (64 bit)
Hi Friends,
Please provide the document to Install Oracle 10g R2 RAC on Linux 5.x (64 bit)
Cluster : Local Disk
OCR and Voting Disk : OCFS2
DB Home : Local
DBF Files and FRA : ASM
Please let me know how to create OCFS2 and ASM Volumes for RAW Disks (SAN Lun's)
Regards,
DBYou can refer below
http://oracleinstance.blogspot.com/2010/03/oracle-10g-installation-in-linux-5.html
http://www.oracledba.org/10gR2/Pre_Install_10gR2.html
http://www.google.com/url?sa=t&rct=j&q=&esrc=s&frm=1&source=web&cd=9&ved=0CHUQFjAI&url=http%3A%2F%2Fcommunities.vmware.com%2Fservlet%2FJiveServlet%2FdownloadBody%2F12534-102-1-13254%2F10gR2%2520RAC%2520INSTALLATION%2520IN%2520LUNX5.pdf&ei=71A5T-jrM8jMiQLihOS_Cg&usg=AFQjCNGnBrzhvm3j9PuPNy4FLJuaxetS1A&sig2=0b8VnMefcXueFUu44-66yQ
Hope this helps,
Regards
http://www.oracleracexpert.com -
How install Oracle Developer Suite 10g for Linux (Including Forms & Reports
hi
i want to install Forms & Reports Developer Suite in Linux OS So i have downloaded From OTN Site
"Oracle Developer Suite 10g for Linux (Including Forms & Reports)"
These are the File's i have Downloaded:
as_linux_x86_ids_101202_disk1.cpio
as_linux_x86_ids_101202_disk2.cpio
so in the Oracle Documentation Site they have given Guide as Follows:
$cpio -idmv < as_linux_x86_ids_101202_disk1.cpio
$cpio -idmv < as_linux_x86_ids_101202_disk2.cpio
after that what should i do ...
How to Install Oracle Developer Suite 10g for Linux (Including Forms & Reports)
Kindly Reply ASAPPl follow the steps in the Install Guide - http://download.oracle.com/docs/cd/B19375_02/doc/frs/install/B19314_02/toc.htm
Srini -
Installing Oracle 8.1.7 on Linux RedHat 7.1
I am trying to install Oracle 8.1.7 on a Linux RedHat 7.1 machine with P4 1.7GHz. I 've tryed all the papers I found on the net for setting the user accounts and groups, linking with the old gcc libraries, etc. The problem is that after starting the OUI and when a window pops-up that spans the products list available, the whole operation finishes too quicly without reaching the 100%. At the next screen when I am trying to give the Instalation Unix group - should be oinstall/dba - I press next and get the message "Unable to setup Inventory. You may not have proper permisions". The machine has 256MBs Ram and 520MB Swap file on a 20GB HDD.Has anyone else seen this before? I couldn't find anything on the net. Can anyone help me? Thanks in advance...
Hi,
In the user where you are trying to install Oracle, give the following command at the prompt.
$ umask
The result should be "022". If it is not, connect as root and change the umask-settings of the user.
$ umask 022 <user-name>
and connect as the user, where you are trying to install and run the Installer.
Hope this will work,
Murali. -
Can't install Oracle 8.1.7 on Linux Mandrake 8.1
Hello,
I have a problem to run Oracle installer on Linux Mandrake 8.1. The installer crash with segmentation volation.
If anyone has a solution...
Thanks
For Information :I have also installed Oracle Client 8.1.7 on a Gentoo Linux 1.2 with success...Please try to unset the following variables in your environment.
UNSET LANG
UNSET LIB_PATH
and then try to Invoke the runInstaller.
Thanks,
Srinivas Katta -
Installing Oracle 8.1.6 on Linux 7.1
How do I go about installing Oracle 8.1.6 0n Li nux 7.1
When I apply the normal installing procedures, it is unsuccessful.
I have successfully installed it on Linux 6.2
Are there any patches
Or Is there any environment variables to be set
Please let me know the proper requirements
Thank you
[email protected]I'm having the same exact problem. The link you have provided
seems to be a bad link. I would really appreciate it alot if you
could help get us through this first step of starting the oracle
installer interface. I never thought it would be this hard to
get started. -
Install Oracle 8.0.5 on Linux 6.2
I have installed Oracle 8 on LINUX 6.2. But when I run svrmgrl, it did not work ans said segmentation fault and generated a file named core. Anybody out there have any idea how to fix this problem?
null<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by XINWEI:
Do you what is the link to download patch for oracle installation on LINUX?<HR></BLOCKQUOTE>
Hi xinwei,
you can go to this web to download glibcpatch.tgz http://technet.oracle.com/software/products/oracle8/software_index.htm
Wendy
Maybe you are looking for
-
GroupLayout can only be used with one Container at a time
Dear all, I am a beginner so please don't throw rocks at me... I have created two frames with NetBeans. One is the main frame (extends from JPanel) and the other frame I put it to be started when pressing a button from the main frame (the second fram
-
Umlauts not displayed in WebI Rich Client
Hello everyone, We have a problem with one user machine using Web Intelligence Rich Client 2-tier mode. Data umlauts (õäöüšž) are turned to symbols and the query result are incorrect. It's interesting, because metadata umlauts are displayed correctly
-
T3i standard vs.micro SD?
I just purchased a T3i and am planning on purchasing several SD cards for storage (video and stills). Is there any advantage to using a standard SD card over a micro SD in an adapter? I'd like to buy the best performance for the price and micro SDs
-
I can sync bookmarks in firefox for android, but only the ones that are on Bookmarks main folder, the folders create below the main folder are not synchronized. Is this a bug or a config issue? Thanks
-
Unable to submit archive to app store
I have tried multiple times to submit to the iOS App store without success. Today is the first time I encounter this problem. The errors I got are as shown in the 2 screenshots. It is either stuck in 'waiting for response' or it returns me 'network c