Installing Oracle Database 10 G Release 2 on Centos 5.0 and SuSe Linux Prof
I have problem in installing Oracle Database 10 G Release 2 on Centos 5.0 and SuSe Linux Professional 9.1.
1. According to information of installation steps given by one user at DIZWELL for Centos 5.0.
In the last step it says as follows (I had bought a CD Centos 5.0) - It gives the following error. My copy of Centos is not a downloaded Zip file.
su - oracle
/osource/runinstaller -ignoreSysPrereqs
Command not found
I had also installed Libaio and Libxp as mentioned in the document given by a user. How can i solve this. I need the complete installation of Oracle 10 G Rel 2 on Centos 5.0.
2. Installation of Oracle 10 G Rel 2 on Novell SuSe Linux Professional 9.1.
I had seen the oui opening up and when it moves a little further it gives some memory error and It requires about 900 + memory. After installing this linux if we have increase the memory What should we do? According to the message it says my system is having only 700+ memory. I do not know whether it is MB/KB. Please given the complete steps to solve this.
Thanks in Advance!
Regards,
Srinivas
was trying to Oracle 10G Rel 2 on Centos 5.0 but There I never got the Oracle Universal Installer.
Now, I had made necessary to Novelll Suse Linux Professional 9.1, where I has made the necessary changes to the system files and installed the libXp, glibc, libaio, make etc and I was able to get Oracle Universal Installer. During Installation at the end I got these errors.
gcc-3.2 Found not found Failed
Overall Result of this check Failed
Kernel Parameters
Semopm=100 found semopm=32 Failed
file-max=65536 Found file-max=52249 Failed
Checking for VERSION-2.6.5-7.97 Found VERSION=2.6.4-52 - default Failed
ip_local_port_range=1024-65000 Found ip_local_port_range=32768-61000 Failed
Check for rmem_default=262144 Found rmem_default=111616 Failed
Check for rmem_max=262144 Found rmem_max-111616 Failed
Check for wmem_default=262144 Found wmem_default=111616 Failed
Check for wmem_max=262144 Found wmem_max=111616 Failed
Recommended glibc VERSION
Expected Atleast= 2.3.3-98.28
Actual = 2.3.3-97 Failed
Overall Result of the above Failed
Checking Physical Memory
Expected = 922 MB
Actual = 500 MB
Please let me know What to do or How to rectify this? Atleast I should be able to install the same in SuSe Linux Professional 9.1. Mine is not a zip file now . I have unzipped and stored my Oracle 10 G Rel 2 on a CD Which was working correctly in SuSe Linux Professional 9.1 but the last step in the Installation in Centos 5.0 did not show the OUI when I had run from the CD. Should I have to configure the Internet for lInux also. I have Broadband internet 256 kbps From hathway Internet. How can i configure Internet in SuSe Linux Professional 9.1, Centos 5.0 and Fedora Core 4. Where can I give my IP Address, Gateway, Primay DNS, Secondary DNS, Email ID and Password, Host Name etc
Somehow, I need to install Oracle 10 G Rel 2 on any one Linux Version for me to work and succeed.Anybody can Help me also.
AFTER RE-INSTALLING CENTOS LINUX 5.0 AGAIN, I HAD REPEATED ALL THE STEPS TAKEN FROM A MEMBER OF ORACLE FORUMS AND THIS TIME, WHEN I HAD GIVEN THE COMMANDS
su - oracle
/osource/runInstaller -ignoreSysPrereqs
THIS TIME IT HAD GIVEN THE ERROR AS FOLLOWS:
PERMISSION DENIED
PLEASE TELL ME WHAT SHOULD BE THE PROBLEM AND HOW TO RECTIFY THIS PROBLEM AND INSTALL ORACLE 10g REL 2 ON CENTOS 5.0 LINUX.
Thanks in Advance
Regards,
Srinivas
Similar Messages
-
Can not Install Oracle Database 11g Release 2
This will be my second time trying to install Oracle Database 11g Release 2 on my Computer. I have Windows 7 x64 and when go through the setup phase, I receive numerous errors stating that files are missing and it will never get past that stage. I downloaded both folders for the database:
Oracle Database 11g Release 2 (11.2.0.1.0) for Microsoft Windows (x64)
win64_11gR2_database_1of2.zip (1,213,501,989 bytes) (cksum - 3906682109)
win64_11gR2_database_2of2.zip (1,007,988,954 bytes) (cksum - 1232608515)
Can anyone tell me what I am doing wrong?Pl post the complete error message. Have you unzipped the two files into the same directory ?
Oracle 11g R2 Windows Installation issue
Re: 11g R2 install failure
Srini -
Install Oracle Database 11g release 2 on Oracle Linux 6.0?
I'm running Oracle Linux Server 6.0, and am trying to install Oracle Database 11g release 2 on it. The installation is failing because it says I need "glibc-2.3.4-2.41", but I think the OS came with glibc 2.12.
How do I upgrade glibc on this machine to glibc-2.3.4-2.41?898649 wrote:
Thanks. What's UEK?UEK = Unbreakable Enterprise Kernel. It is installed by default with Oracle Linux 5 Update 7. Also, if you install the oracle-validated RPM (as part of the initial install or via yum afterwards), all the pre-requisites for installing database will be taken care of for you. -
Anyone install Oracle database 10g Release 2 on OS "Vista Home" Edition??
Dear all,
Anyone install Oracle database 10g Release 2 on OS "Vista Home" Edition??
Best Regards,
AmyI think that all that Hans and Werner are saying is that since Oracle is not supported on Windows Home anything, if you have any problems with it, blame Windows and not Oracle. I would also guess that most people who are serious about learning Oracle (which you probably are since no business would install Oracle on Windows Vista Home), would install it on a supported platform such as the Windows Server Editions, XP Pro or Linux.
One possible alternative to what you are asking about is to install a virtual machine on your Windows Home Premium, install Linux as the guest OS in your virtual machine and then install Oracle on the Linux OS. The good thing about this type of installation vs. a dual-boot-with-Linux installation is you don't have to worry about possibly ruining your Windows installation if something goes wrong setting up the dual boot.
Tom -
Install Oracle Database 10g Release 2 (10.2.0.2) on Solaris Ex
Hi,
I did try install oracle in my Solaris Express Developer Edition (5/07), but i receive an error about version of Solaris, too new version.
I use AMD 64, I need install oracle 32 bit mode.
And how I install Solaris Ex in 32 bit mode.
My aplication need run in 32 bits...
ThanksYou maybe need to post the complaint in a monitored forum by Oracle, Download, in the feedback section :
Instant client downloadfor Linux x86 version 11.1.0.6.0 basic does not work
Nicolas. -
ACCESS can't TO Oracle Database 10g Release 2 (10.2.0.1) by fedora8
hi,I'm a japanese,and my english isn't good,but Could you please help me.
I can't access from windows xp professional to fedora8(linux).
my windows xp installed Oracle Database 10g Release 2 (10.2.0.1) express edition.
my fedora8(linux) installed Oracle Database 10g Release 2 (10.2.0.1) express edition.
I could use from windows to fedora8 on ffftp.
name of tnsnames.ora file is XE both windows and fedora8.
port of tnsnames.ora file is 1521 both windows and fedora8.
error is ORA-12154.
tnsping ip address of server
TNS Ping Utility for 32-bit Windows: Version 10.2.0.1.0 - Production on 15-6月 -
2008 19:14:45
Copyright (c) 1997, 2005, Oracle. All rights reserved.
エイリアスを解決するためにHOSTNAMEアダプタを使用しました。
Attempting to contact (DESCRIPTION=(CONNECT_DATA=(SERVICE_NAME=))(ADDRESS=(PROTO
COL=TCP)(HOST=address of server)(PORT=1521)))
OK (20ミリ秒)
tnsping XE
TNS Ping Utility for 32-bit Windows: Version 10.2.0.1.0 - Production on 15-6月 -
2008 19:19:33
Copyright (c) 1997, 2005, Oracle. All rights reserved.
エイリアスを解決するためにTNSNAMESアダプタを使用しました。
Attempting to contact (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)
(HOST = サーバのipアドレス)(PORT = 1521))) (CONNECT_DATA = (SERVICE_NAME = XE)))
OK (20ミリ秒)
tnsnames.ora is
windows
XE =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = ip address of server)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = XE)
fedora is
# tnsnames.ora Network Configuration File:
XE =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = ip address of server)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = XE)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC_FOR_XE))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
I'm looking forward to hearing from you!
Thank you.Thank you so much Ankit!
That's right!
1. Where is the database residing where you are trying to connect? Is it on SW1 or SL1 or some other Server?
I'm staying on SW1.
2. How are you trying to connect? Using sqlplus? Please paste complete commands and error messages.
I'm using sqlplus and japanese si object browser.
When I use sqlplus,
SQL*Plus: Release 10.2.0.1.0 - Production on 水 6月 18 01:33:54 2008
Copyright (c) 1982, 2005, Oracle. All rights reserved.
username: fedoraserver
password: ******
ERROR:
ORA-01017: invalid username/password; logon denied
username:
When I use japanese si object browser,
username fedoraserver
password ******
database XE
ORA-12154
Thanks,
yoshi -
Can't succesfully install Oracle Database 10g Express Edition on Ubuntu
Hi,
I've been trying to install Oracle Database 10g xe on Ubuntu 10.04 and when I execute the .deb package (oracle-xe-universal_10.2.0.1-1.0_i386.deb) I get a quick installation that doesn't ask me for any configuration settings. When the installation is finished I don't get any menu in my Applications menu named "Oracle Database 10g Express Edition" as specified in Getting Started Guide (I only get some items grouped into an category called "Other" (Backup Database, Get Started, Get Started With Oracle Database 10g Express Edition, Go To Online Forum, Read Documentation, Read Online Help, Register For Online Forum, Restore Database, Run SQL Command Line, Start Database and Stop Database). As a consequence I can't access the Oracle Database Home Page.
In addition when I click on Start Database I get the following message: "Operation failed. josep is not member of 'dba' group".
I've tried to re-download the packages and to configure it by editing /etc/init.d/oracle-xe but this doesn't solve my problem.
can you give me some help?
Thabk you in advance!Markus Waldorf wrote:
Did you run the post-installation?
$ sudo /etc/init.d/oracle-xe configureYes I've done it but it doesn't seem to work... -
Check "Problem: Oracle Database 10g Release 2 can only be installed in new
Hi All
Installing 10g software on AIX Box in /oracle/oraHome2,where oracle9i is already installed in /oracle/oraHome1 and oracle inventory is in /oracle/inventory
In product specific prerequisite screen I am getting the
check:Oracle Home incompatibilties is failed I am getting the error
Check complete. The overall result of this check is: Passed
=======================================================================
Checking for Oracle Home incompatibilities ....
Actual Result: Oracle9i Database 9.2.0.1.0
Check complete. The overall result of this check is: Failed <<<<
Problem: Oracle Database 10g Release 2 can only be installed in a new Oracle Home
Recommendation: Choose a new Oracle Home for installing this product
though I am installing it in different oracle homes why i am getting this error?
Is it because 10g installation is picking the same oracle inventory /oracle/inventory
do i need to make different oracle inventory for different oracle homes???????plz confirm..is thats the reason i am getting this error??????
Thanks inadvance
GaganI figure out you are trying to install 10gR2 on top of an existing 9iR2 Oracle Home. This is corrected at the Path definition window. Most probably you just click on the <Next> and by default the 9iR2 Oracle Home was selected. You must define a new oracle home for the 10gR2 install.
~ Madrid -
Install and config oracle database 10g release 2 in domain or LAN network
Please help me config oracle database in two case:
case 1: I want to install only one oracle database in a computer (Server) and other computers can connect and using it. I try to install oracle database in a computer (this is a Server computer). But database is used for this computer, other computers can't connect and using it.
case 2: If oracle database in a domain, can you help me install and config it.
example: my domain is: piacom.com.vn. All computers in this domain.
Thank !Wich kind of installation did you use ?
Personal ? Enterprise ? -
Oracle database 11g release 2 installation problem on windows 7 (64-bit)
First of all my windows is not genuine, but on my friend's desktop oracle download and installation worked fine, he chose "create and configure database" options, and it works very well on his desktop, though his windows is also illegitimate. In my case, when I select "Create and configure database" option and pressed 'next",
(Go to my blog to see it with snapshots: Computer Science: Oracle database 11g release 2 installation problem on windows 7 (64-bit))
it asks to select class, I select "Desktop class" and pressed "next". The moment I pressed "next", the whole setup thing disappeared like it was never started. I searched for all possible reasons for why its not getting installed on my laptop, I used registry cleaner s/w, deleted 25 GB of data to create free space if it were the problem, increased the virtual memory to increase the space for RAM, I did almost everything to get this setup working, but I found no success with the "Create and Configure database" option
and
then
I chose a "database software only" option and chose to store in a folder w/o spaces. This way, I got database s/w only and then later I found "Database configuration Assistant (DBCA)" from windows START button and clicked to create and configure database manually. The steps are pretty much interactive and doesn't involve much brainstorming.
The values I filled for
1) Global Database Name : orcl
2) System Identifier : orcl
3) I chose common password for both SYS and SYSTEM
4) while on Enterprise Manager Configuration step, It asked me to create and configure listener in oracle home, so for that too, I typed "netca" in windows START menu and clicked it. There I added a listener.
5) I chose a Storage area which was the Oracle-home itself i.e. where our installation files goes , in my case it is : C:\oracle_base\product\11.2.0\dbhome_1\oradata
6) Then after few more nitty-gritty clicks, we are set to go !
Finally to write SQL code and to create your first TABLE , type "sqlplus" in windows "START" menu and click it when it appears. A command-prompt like window appears , which will ask you for username and password, so here they are :
Username : sys/ as sysdba
Password : (its the one you created in step 3 stated above )
After this you are ready to write your first SQL command.Is this your solution to your original post at Oracle database 11g release 2 installation on windows 7 (64-bit) ?
Pl be aware that you should not create any custom objects in SYS or SYSTEM schema - you should create any such objects in a separate custom schema.
About Database Administrator Security and Privileges -
Hi,
I found that in SELECT STATEMENTs where we use "xmlagg() functions with a GROUP BY/ORDER BY,it fails with ORA-22813 if the result is too large.
This happens as there is a hard coded limit on the result size. (max 30k)
Next,i confirmed that and when i removed a portion of the XML agg() values and executed it---Wonders,it runs perfectly fine.
This means that ""xmlagg() functions with a GROUP BY/ORDER BY,fails with ORA-22813 since the result is too large.
I have come to know that patch "Release 10.2.0.4" has the fix for Bug-22813 for "xmlagg() functions with a GROUP BY/ORDER BY".
Could you all please confirm that "Oracle Database 10g Release 10.2.0.4" (patch 10.2.04) fixes the issue?
Based on your confirmation,i can go ahead to get the patch installed.
Current Version:-Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - 64bi
Thanks
MainakYour query should be written something like this..
select d.*
from fbnk_customer,
XMLTABLE
'//c3'
passing XMLRECORD
columns
C3_VALUE varchar2(60) path 'text()'
) d
where recid='1001400'; Although it would be better to use an extact path expression rather than '//c3' -
Error while installing Oracle Database Lite 10.2.0.1.1 for Win
Hello,
I am trying to install Oracle Database Lite 10.2.0.1.1 on Windows XP. I am going according screens on this page:
http://www.oraclebrains.com/2008/07/installing-oracle-database-lite-10g-release-3-mobile-server/
But at Step:12 - Mobile Server repository Wizzard after password enter I get error --- Io exception: The Network Adapter could not establish the connection. May I insert specific password for Username SYSTEM? Or where is problem?
Thanks for hint
DavidHi,
I have the same problem but, how can i know what my SID is ? i am trying with "ORCL" and it doesnt work.
Do you know in which file i can get it ? in the documentation of the installation i found this:
"If you are not sure of the values to enter for the URL, then you can query the data dictionary to obtain these values.
Connect as SYSTEM and run the following queries.
To retrieve the SID, execute: select instance_name from v$instance;
If you need to retrieve the port number, check the listener.ora file on the
back-end database."
But how can i query the database if i have not finished to install it yet and where is located the listener.ora file ?
I hope you can help me.
Thank you. -
OIM 9.1.0.1 in oracle database 11g release 2
I am installing IOM 9.1.0.1, using Oracle Database 11g release 2 but I have the following errors
Failed to load XML. Unable to find record in UPA where USR_KEY = 1
Failed to load XML. Unable to find record in GPA where UGP_KEY = 1
I'm doing in Red Hat 5 x86-64The issue is not the WLS 10.3.2. We just had the same issue. The issue is the database 11gr2 is not supported. The highest supported DB is 11.1.0.6 (11gr1). There is a sequence number problem in 11gr2 and there is no workaround for it. So, go to 11.1.0.6 DB and the issue will be resolved. However, OIM 9.1.0.1 is not supported on WLS 10.3.2 so, install 9.1.0.1 and then install patch for 9.1.0.2 and then install a patch BP05. This will bring it to WLS 10.3.2 and OIM 9.1.0.2 BP05 and DB 11.1.0.6. These are compatible.
-
Hello everyone;
We are in the process of looking into upgrading from our current Oracle 9.1.0.8 to Oracle Database 10g Release 2 (10.2): Windows
We would like to download and install the 10.2.0.1 base release (Oracle Software). When I go on SAP Marketplace
https://websmp210.sap-ag.de/oracle-download and goto the (Software Download) section and click on
Oracle 10.2 Software (32-bit versions) to download I receive a error NO DATA AVAILABLE.
Is there another area to download the Oracle Software? or do I need to purchase a CD from SAP or can I download this base release straight from Oracle?
Thanks for your time and have a great day.Hello Pellegrino,
just download it from the SAP container for each product .. for example
-> Installations and Upgrades - Entry by Application Group -> SAP NetWeaver -> SAP NETWEAVER 7.0 -> Windows Server -> ORACLE
Regards
Stefan -
Hi,
Hoping someone who has already tried/installed can let me know whether the installation of Oracle Database 11g Release 1 (11.1.0.6.0) will work on Windows Vista Ultimate (32bit) or knows whether it does or doesn't?
Thanks.
Tony.For this kind of information , check Oracle certification page
Certify - Oracle's Certification Matrices
Maybe you are looking for
-
I have two Apple computer, a Mac Pro and a Mac Mini.. When I attemped to sign in on Apple on one of the computer (Mac Pro) that I made the password on, will work OK but if I got to the other computer (Mac Mini) and sign in, it will tell me I am using
-
How to rename registered devices on Profile Manager
When we use the Profile Manager for our iPad control, we can not select the each iPad to rename them . Is there any way we can rename the devices in Server side? Would you advise us how we can configure in Server side for allowing to rename them? We
-
Hi all, I have a requirement to display the Data in ALV tree format with some fields as editable.I have to display data in 3 levels,which are of differents structures. To achieve editable in ALV tree display,I have used ALV GRID along with Tree dis
-
Training for stress management
What techniques are being employed by the corporate organizations for stress management of their employees, and are they really beneficial and what extent are they successful in implementing these techniques?
-
Rule Updates - Custom Risks, Multiple Systems
We have CC 5.2 on SP8 connected to 3 ECC clients in our landscape. We also have a bunch of Custom Risks - both Conflicting and Critical action. If we update to SP9 to include ALL Rule updates from Q2 2008 as indicated in Note: 1173980: will the Cust