Installing oracle forms on lg x120 netbook
Hello,
somebody bought me the lg x120 netbook. i has an intel atom processor 1.6ghz. and a 1G ram. I wonder if i can install oracle forms 10g on it. is it not close enough to the 2.0ghz processors?
help
Win XP is there to meet its performance. M$ revived XP intentionally to relaunch it on netbooks as a relatively moderately demanding in their range of systems.
Win7 will simply kill your netbook.
I even doubt LG is correct about the technical details as they say it supports System Memory of 1GB (DDR2 800MHz 1DIMM) while the Mobile Intel®945 GSE Express Chipset has Single-channel non-ECC 400/533 MHz DDR2 maximum. The 2 GB limit of memory is possible in "a combination of SODIMM and memory down" if LG supports this in this model.
Take into account that some part of the memory is allocated to the integrated graphics engine to make it even worse.
Good luck!
Similar Messages
-
Error while installing oracle forms on windows 7
hello all,
i want to install oracle forms 10g on windows 7.
But during installation i am facing the following problem.
*"Install has encountered an error while attempting to verify your virtual settings.please verify that the sum of the initial sizes of the paging files is at least 256 mb"*
How can i avoid this?
Thanks
KaushalRead the following link and you will get Answer.
How to Install Oracle ON windows 7
If someone response is helpful or correct, please mark it accordingly. -
Problem installing Oracle forms and report in windows 7
I have a problem while installing Oracle forms and reports in windows 7 64 bit
The error is : [as] [ERROR] [] [oracle.as.provisioning] [tid: 20] [ecid: 0000IY5_e_EApIRMyYAhMG1BuDGr00000B,0] [[
oracle.as.provisioning.exception.ASProvWorkflowException: Error Executing workflow.
at oracle.as.provisioning.engine.WorkFlowExecutor._createDomain(WorkFlowExecutor.java:688)
at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:393)
at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
at oracle.as.install.classic.ca.standard.StandardWorkFlowExecutor.execute(StandardWorkFlowExecutor.java:65)
at oracle.as.install.classic.ca.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:26)
at oracle.as.install.classic.ca.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:61)
at oracle.as.install.classic.ca.ClassicConfigMain.doExecute(ClassicConfigMain.java:124)
at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:335)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:87)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:104)
at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:63)
at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:158)
at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:83)
at java.lang.Thread.run(Thread.java:619)
So I Google for it and found that this is version mismatch (May be I am wrong) and it tells that I have to install WLS - 10.3.2 with ofm_pfrd_win_11.1.1.2.0_64 (1 to 4)
But I am unable to get wls version 10.3.2.
For better understanding I am listing my installers :
(I) Windows 7 Ultimate 64 Bit
(II) (Oracle 11g) win64_11gR2_database (1 & 2)
(III) ofm_pfrd_win_11.1.1.2.0_64 (1 to 4)
(IV)wls1033_generic.jar , wls1033p_generic.jar , wls1035_generic.jar
(V)accessbridge-2_0_2-fcs-bin-b06
(VI)ofm_rcu_win32_11.1.1.2.1_disk1_1of1,ofm_rcu_win_11.1.1.3.1_disk1_1of1
(VII) ofm_wc_generic_11.1.1.5.0_disk1_1of1
(VIII)jdk-6u38-nb-7_2_1-windows-i586-ml , jdk-6u38-windows-x64
(IX) oepe-wls-indigo-installer-11.1.1.8.0.201110211138-10.3.6-win32
(X)wls1033_oepe111150_win32.exe
(XI)wls1035_win32.exe
(XII)wls1035_oepe111172_win64
(XIII)oepe-indigo-installer-12.1.1.0.1.201203120349-12.1.1-win64
After the installation while configure the forms reports, I am stuck while creating domain.
steps I follow is :
(i) Install Windows 7 Ultimate 64 Bit
(ii) (Oracle 11g) win64_11gR2_database (1 & 2)
(iii) wls1033_generic.jar
(iv) accessbridge-2_0_2-fcs-bin-b06
(v)ofm_rcu_win32_11.1.1.2.1_disk1_1of1
(vi) ofm_pfrd_win_11.1.1.2.0_64 (1 to 4)
Please any body help, for the installation of oracle forms and reports.
I have a formatted Windows 7 Ultimate
Where I have installed Adobe Acrobat Reader
IIS server from windows installer
Now I want to know the exact procedure so that i can run the forms and report in my machine.
This is my first installation of Oracle forms & Reports, so please do not pre assume about my understanding (Like "to install this he surely did this environment settings" )
Please specify all the steps
Furthermore if Another software I have to download then please tell me.
And I will be grateful if you specify the mistakes in my side.
Looking forward with anticipation.Solved, Thank you
-
How to Install Oracle Forms 10g (9.0.4) Demos
Hi.
My forms version is :
Forms [32 bits] Versión 10.1.2.0.2 (Producción)
Oracle Toolkit Versión 10.1.2.0.2 (Producción)
PL/SQL Versión 10.1.0.4.2 (Producción)
I'm trying to install Oracle Forms 10g (9.0.4) Demos. Everything works fine until step 5. I can even access the forms demos home page(changing forms90 to forms). However when i try to access any link, i get the following error:
404 Not Found Resource /forms90/f90servlet not found on this server
What's wrong?. I believe forms is pointing to the wrong direction:
http://mluis:8888/forms90/f90servlet?config=reusable_picklist
For example to show the tick image on step five on install guide, I have to replace
http://mluis:8888//forms90/formsdemo/images/tick.gif
for http://mluis:8888//forms/formsdemo/images/tick.gif
This is because I don't have a forms90 directory in my Oracle_Home. I changed forms90 for forms in formsdemo.env. But still doesn't work. So my question is
- Are these forms demos built for my forms version?.
- If not, what do i have to change in order to make things work. I'm really interested in some special features like PJC, Webutil etc.
- The configuration is still pointing at a forms90 directory. I need to change it to just forms but don't know which files.
Thanks in advance ...!Hi,
Have you resolved this issue? I have gotten a bit further.
You also need to change any f90xxxxxx to frmxxxxxx
But the servlet cannot seem to find any of the demo forms.
I assume a path issue, but cannot seem to find it.
Any clues?
Thanks. -
Install Oracle Forms 10g R2 in Windows 7
Hi,
does anyone has ever succeeded to install Oracle Form 10g R2 in Windows 7 Home Premium?
How to overcome the Jinit issue in there? Friend of mine suggested we can download the Jinit for Vista version and replace the current Jinit with it.
Do I need to change anything too in Formsweb.cfg? Windows 7 works with IE 8.
Is the Forms can work with Oracle 11g R1 client 64 bit for Windows?
thanks in advance.Why bother with JInit? It's long desupported. Just replace it with the latest Java Plugin, and you'll be fine.
-
Domain issue while installing oracle forms 11g
Hi . Trying to install oracle Forms 11g ,while installing it is getting error while creating domain .. Any clue.
Below are log after performing the suggested steps..
Successfully launched the Node Manager.
The Node Manager process is running independent of the WLST process.
Exiting WLST will not stop the Node Manager process. Please refer
to the Node Manager logs for more information.
The Node Manager logs will be under D:\Oracle\weblogic64\wlserver_10.3\common\nodemanager
Node Manager starting in the background
java.lang.Exception: The node manager failed to start
at oracle.as.provisioning.weblogic.ASDomain._startNodeManager(ASDomain.java:3709)
at oracle.as.provisioning.weblogic.ASDomain.startNodeManager(ASDomain.java:3517)
at oracle.as.provisioning.engine.WorkFlowExecutor._createDomain(WorkFlowExecutor.java:637)
at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:391)
at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
at oracle.as.install.classic.ca.standard.StandardWorkFlowExecutor.execute(StandardWorkFlowExecutor.java:65)
at oracle.as.install.classic.ca.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:26)
at oracle.as.install.classic.ca.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:61)
at oracle.as.install.classic.ca.ClassicConfigMain.doExecute(ClassicConfigMain.java:124)
at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:371)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:88)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:105)
at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:64)
at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:160)
at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:86)
at java.lang.Thread.run(Thread.java:662)
java.lang.Exception: The node manager failed to start
at oracle.as.provisioning.weblogic.ASDomain._startNodeManager(ASDomain.java:3709)
at oracle.as.provisioning.weblogic.ASDomain.startNodeManager(ASDomain.java:3517)
at oracle.as.provisioning.engine.WorkFlowExecutor._createDomain(WorkFlowExecutor.java:637)
at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:391)
at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
at oracle.as.install.classic.ca.standard.StandardWorkFlowExecutor.execute(StandardWorkFlowExecutor.java:65)
at oracle.as.install.classic.ca.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:26)
at oracle.as.install.classic.ca.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:61)
at oracle.as.install.classic.ca.ClassicConfigMain.doExecute(ClassicConfigMain.java:124)
at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:371)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:88)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:105)
at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:64)
at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:160)
at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(Confi -
Install oracle forms / report 11g
I am try to install Oracle Forms and Reports 11gR2 (11.1.2.1.0)
I wish to know with version of weblogic server
i must install to be work with this version of Forms / Report
Work with
WebLogic Server 11gR1 (10.3.6) + Coherence + OEPE - Package ???
Thank youHi
please reference to certificate matrix as the following :
http://www.oracle.com/technetwork/developer-tools/forms/oracle-forms-11gr2certmatrix-519680.xls -
Installing Oracle Forms on Linux
Dear all,
I'm trying to install Oracle Forms but stumbling upon its perquisites. My machine is Linux Slackware 13.0 64 and I've been trying to install Developer Suite but it failed since my Linux version is not supported.
My question is:
1. Can I modify (or cheat on) Universal Installer setup so that it let me install on Slackware?
2. I also looked at Fusion Middleware requirements and it also supports only Linux Oracle, Suse, or Redhat. Is there any workaround to install the software without changing my OS?
Best regards,
ValYou can just copy the relevant parts (the ones marked with error). You can also look at the timing
when it happened the reports environment did not start.
From what i remember this could be a memory issue, standard every managed server (WLS_FORMS and WLS_REPORTS) instance
is configured with 1024m bytes of memory.
What we did is first install a forms instance and after that a reports instance. After the forms installation we adjusted the
memory parameters in setWLSEnv (<middleware-home>/user_projects/domains/<domain-name>/bin). Look in this file
for references to WLS_FORMS (something similar to: if [ "${SERVER_NAME}" = "WLS_FORMS" ] ; then).
Another thing which springs to my mind is, which products did you select. If you just want Forms and Reports
you can select just the following:
- Oracle Forms
- Oracle Reports
- Developer Tools aan.
- Management Components
- Oracle HTTP Server
and deselect the other options:
- Oracle Portal
- Oracle Discoverer
- Oracle WebCache
- Clustered (if you are not using clustering)
We also had to fix the following files (i do not think that you have to do this since your Forms did not show any problems):
- (On Windows) Copy the file msvcr71.dll (FMW/windows/extra) to WINDOWS/system32.
- Copy the file mod_wl_ohs.so (FMW/<operating-system>/extra) to <middleware-home>/as_1/ohs/modules. -
Error installing oracle forms 11g in window 7
hi am having this error when installing oracle forms in windows Starting Oracle Universal Installer...
Checking swap space: 0 MB available, 500 MB required. Failed <<<<
Checking monitor: must be configured to display at least 256 colors Higher than
256 . Actual 4294967296 Passed
Some requirement checks failed. You must fulfill these requirements before
continuing with the installation,
Continue? (y/n) [nok i go my computer>system properties and change my performance to 2046
-
Help me install oracle form and report 9.0.4 on red hat AS 4 x86
i installed oracle database 10.0.2 on my red hat AS 4 x86 in /u01/app/oracle/product/10.0.2/db_1. Now i want to install oracle form and report 9.0.4 on my computer in /u02/app/oracle/product/9.0.4
The oracle installer checks for required packages. It will produce the following list of missing packeges:
Package gcc-3.2.3-20 is missing
Package compat-gcc-7.3-2.96.122 is missing
Package compat-gcc-c++-7.3-2.96.122 is missing
Package compat-libstdc++-7.3-2.96.122 is missing
Package compat-libstdc++-devel-7.3-2.96.122 is missing
Package setarch-1.3-1 is missing
Package sysstat-4.0.7 is missing
Package gnome-libs-1.4.1.2.90-34.1 is missing
Package libstdc++-3.2.3 is missing
Package compat-libstdc++-devel-7.3-2.96.122 is missing
Package compat-glibc-7.x-2.2.4.32.5 is missingbut i installed newer versions of them. so can i continue to install without missing packeges??? and how to install missing packages because they conflict with packages i installed.
i tried to continue installation without missing packages and have some errors:
"Error in invoking target 'agent' of makefile /u02/app/oracle/product/9.0.4/sysman/lib/ins_sysman.mk"
Error in invoking target 'install' of makefile /u02/app/oracle/product/9.0.4/sqlplus/lib/ins_sqlplus.mk"
Error in invoking target 'install' of makefile /u02/app/oracle/product/9.0.4/plsql/lib/ins_plsql.mk"
Error in invoking target 'relink' of makefile /u02/app/oracle/product/9.0.4/precomp/lib/ins_precomp.mk"
Error in invoking target 'install' of makefile /u02/app/oracle/product/9.0.4/webcache/lib/ins_calypso.mk"
Error in invoking target 'install' of makefile /u02/app/oracle/product/9.0.4/network/lib/ins_net_client.mk"
Error in invoking target 'webm-install'(or genm-install or gen-install) of makefile /u02/app/oracle/product/9.0.4/forms90/lib/ins_forms.mk"
Error in invoking target 'proxy install' (runm-install,server-install,cgi-install,cli-install,conv-install,qv-install) of makefile /u02/app/oracle/product/9.0.4/reports/lib/ins_reports.mk"
and error in Configuration Assistants:
"output generated from coniguration assistant "oracle net configuration assistant":/u01/app/oracle/jre/1.1.8/bin/.../bin/i686/native-threads/jre: relocation error
":/u01/app/oracle/jre/1.1.8/bin/.../bin/i686/native-threads/libjava.so: symbol_ _libc_wait, version Glibc -2.0 not defined in file libc.so.6 with link time refrence
Someone help me!!!
Thanks.The requirements for installing 10.2.0 and 9.0.4 on RHEL4 differ - 9.0.4 is based on older versioned RSFs and require linking against older compatibility libraries.
The OUI may incorrectly complain if later versions of the required/pre-requisite packages really are installed - this should not be a problem functionally, however.
The latter errors you report, however (make, relocation error, glibc/symbol), are symptomatic of trying to link with/against incompatible gcc/glibc versions. Try installing the following additional compatibility files (appropriate for your architecture);
- http://oss.oracle.com/projects/compat-oracle/dist/files/RedHat/compat-oracle-rhel4-1.0-5.i386.rpm
- http://oss.oracle.com/projects/compat-oracle/dist/files/RedHat/compat-libcwait-2.1-1.i386.rpm
If you have not already done so, I suggest you create and use (i.e. source) separate environment definition files when working with each product/version environment. For 9.0.4, ensure that you specify environment variable LD_ASSUME_KERNEL=2.4.19 before installing 9.0.4 (or relinking).
If you have MetaLink access, refer also to Note.315832.1, Note.389811.1.
Message was edited by:
mychan -
Installing Oracle Forms Reports 1112 throws OutOfMemoryException: PermSpace
Installing Oracle Forms Reports 11.1.2 on Windows 2008 64bit throes OutOfMemoryException: PermSpace when running the ASInstance configuration. I tried to configure the JAVA_OPTIONS variable to increase the MaxPermSize parameter but is not working.
Regards,
Néstor BoscánThe server has 16GB of memory and this is a new installation. I tried to configure JAVA_OPTIONS=-XX:MaxPermSize=512m and JAVA_OPTIONS=-XX:MaxPermSize=1024m but it didn't work.
-
Hw to install oracle forms and reports 11g builder on windows machine
HI Guys
i need to install oracle forms and reports 11G builder on windows machine for devlopers.. do anybody know from where i can download them and install them on developers machine. if anybody know steps of them .. that will be great..
Regards,
DevenderMaybe this thread will help you: Re: Install Forms & Rpts 11.1.1.3 with WebLogic Server 10.3.3 on Win32
-
Install Oracle Forms and Reports 11g (11.1.1.4)
Dear Gurus,
I would like to install Oracle Forms and Reports 11g (11.1.1.4) on Windows 2012 Server. So could you please suggest me whether Windows 2012 is certified or not for installing Oracle Forms and Reports 11g (11.1.1.4) .
Thanks & Regards,
Satish Kumar Sadhu.Hi Satish,
Forms 11.1.1.4 is not certified for Windows Server 2012. Further more, no 11g Forms release is actually certified by Oracle to run on Windows Server 2012.
I would use Windows Server 2008 and use Forms 11.1.2.1 (11gR2). 11gR2 is the best release from Oracle and will run much better than Forms 11.1.1.4.
For a peace of mind, you can check My Oracle Support - Certifications Tab and/or the published Certification Matrices below:
11gR1 Matrix (For releases 11.1.1.x): http://www.oracle.com/technetwork/middleware/downloads/fmw-11gr1certmatrix.xls
11gR2 Matrix (For releases 11.1.2.x): http://www.oracle.com/technetwork/developer-tools/forms/oracle-forms-11gr2certmatrix-519680.xls
Thanks,
Gavin -
How to install oracle Forms and Report 10g in windows XP OS
How to install oracle Forms and Report 10g in windows XP OS. Already installed oracle Database 10g in my notebook.
It is working good.
please help me this issue.
please give the steps..............
Thanks
RajeevHello Frank,
for development, you need to install Oracle Developer
Suite 10g. This includes Forms and Reports.this topic interests me too, because I've downloaded Developer Suite and Database (both for 10g) from Oracle website, installed them, but I couldn't connect to a database.
What should be done for me to create a database link and be able to connect locally, in my personal Desktop computer? (Not to a server)
Once it was told me here that I should download 10g Database - I did it, and installed it, but it didn't work. Later, some of my job partners said I should install them in a sequence - that is, 1st the Developer, and 2nd the Database. But it has failed too. And I don't know how to configure a database connection.
Best regards, -
Install oracle forms and reports in ubuntu gusty gibbon
Hi,
Can anyone help me in installing oracle forms and reports on ubuntu. You can send me the link or email me.
Regards
Anup NAIRWhich version r u planning to install? 6i or 10g?
If you are planning for 10g , I think it is not supported by Oracle.
I found the below link which tells step by step process though you need to do your own research as well.
http://www.eckford.ca/Sympatico/htdocs/ODS_Install.html
Please let me know whether it worked or not.
I am also planning to install it on BOSS Linux.
Maybe you are looking for
-
Error while adding the measure to catalog
Hi After successfully validating the cube , I created one catalog using CWM2_OLAP_CATALOG.create_Catalog , it successfully went on .Then I added the measure which i created to the catalog to the catalog thru ' CWM2_OLAP_CATALOG.Add_Catalog_Entity pro
-
I downloaded new Firefox but now can't open Firefox at all. It says it is not supported on my system. How can I get the earlier version which I deleted?
-
What parts are required to use a CB-68LPR in a CA-1000?
Hello, I want to use a CB-50LP, CB-68LPR, or SCB-68 in a CA-1000. Is there an NI part number for a ribbon cable that goes from the CB-50LP to the back of the CA-1000? Is there an NI part number for a ribbon cable that goes from the CB-68LPR to the ba
-
Using Ant or JUnit with Sun's Verifier
Hi, I am trying to integrate Sun's J2EE "Verifier" into the build process. I am trying two different approaches, but am encountering similar issues. Using Ant One approach I am trying is with an Ant target. I keep getting this error "No local string
-
[SOLVED]systemd-timesyncd is not syncing time
Quick solution: 1) Check that systemd-networkd is running (if not, start it) 2) If it is running and timesyncd is not syncing, just restart systemd-networkd more on this in the last post. Hello, I tried to replace ntp with systemd-timesyncd. I disabl