Installing Oracle linux 6 using kickstart method

Hi,
Is it possible to install Oracle Linux 6 using kickstart method. Because we have multiple machines to be installed with Oracle Linux 6. Can someone throw some light on this please.
Regards
Dilip

I suggest to start with chapter 32 of https://linux.oracle.com/documentation/EL6/Red_Hat_Enterprise_Linux-6-Installation_Guide-en-US.pdf or provide more details about the problem you are experiencing.

Similar Messages

Problem Installing Oracle Linux 6.3 - 'Disc not found message box'

I'm trying to install Oracle linux on a old laptop. Single disk drive.
I downloaded V33412-01Oracle Linux Release 6 Update 3 Boot iso image for x86_64 (64 bit)
burned it as an ISO image on a CD.
Inserted the CD,started the system, cd booted and the installation started.
Skipped the verify media (I verifed it during another installation try)
selected English
selected US
When prompted for installation method, I tried selecting 'LOCAL CD/DVD' since that's where my CD is at. I get a 'Disc not found message box'.
I've also tried to select the /dev/sda1, which the installation accepted, only to fail later saying it can't find the ISO image.
I also tried putting the ISO image and unzipping the contents of the file onto a USB stick and selcting this during the install - same error.
I tried putting V33413-01 onto the USB stick and selcting that - its too big to burn on a CD, that didn't work..
Any ideas here? Though this was a easy installation but I'm scratching my head as to how to continue?

Not very clearly - for me at least.
Not sure - and not sure where to find instructions on how to do this.
It mentions that you don't need the source CDs
Oracle Linux Release 6 Update 3 source DVD 1 V33413-01 3.1G
Oracle Linux Release 6 Update 3 source DVD 2 V33414-01 1.7G
Not sure what to do with these anyway.
Installation
To install Oracle Linux 6.3 from DVD media, follow the following steps:
1. Download the compressed binary DVD images
Download Oracle Linux 6.3 DVD from the Oracle Software Delivery Cloud.
You do not need to download source DVDs to install Oracle Linux.
2. Verify the downloaded media
Verify the downloaded file by comparing its sha1sum or md5sum with the published
sha1sum or md5sum.
3. Write the DVD image to DVD
Use your favorite cd burning software to write these images directly to DVD.
You should not simply copy the files onto the DVD. You must use a DVD burner
that can accept an ISO image as input, and which can create a bootable DVD
from it. To test if you have burned the images correctly, insert a burned
DVD and ensure that multiple files and directories are visible.
6. Insert the DVD, and boot
Insert the DVD into your system, boot from DVD, and follow the on-screen instructions
to deploy Oracle Linux!

Can we install oracle rac11gR2 using RHEL5.5

Dear All
can we install oracle rac11gR2 using RHEL5.5 ? because we have to install it on production env. if so is there any requirement and pdf guide for same
please reply soon
Thanks in advance

Hi;
can we install oracle rac11gR2 using RHEL5.5 ? because we have to install it on production env. if so is there any requirement and pdf guide for sameYes you can.Please check below link
http://download.oracle.com/docs/cd/E11882_01/install.112/e17214/toc.htm
Also see:
Oracle Database on Unix AIX,HP-UX,Linux,Mac OS X,Solaris,Tru64 Unix Operating Systems Installation and Configuration Requirements Quick Reference (8.0.5 to 11.2) [ID 169706.1]
Master Note of Linux OS Requirements for Database Server [ID 851598.1]
Regard
Helios

Installing Oracle Linux 5.8 on Virtual Box

I'm trying to install Oracle Linux 5.8 on Virtual Box. I have downloaded V31120-01 and burned to the DVD, I think successfully.
However, when I start the Virtual machine, I get the Opening screen, "Oracle Linux" the little picture of the penguin guy, etc, so I think my DVD is good.
The screen says, "To install or upgrade in graphical mode, press the <enter> key." So I do.
Several lines of text flow across the screen, but then the process seems to stop with no prompt on what to do next or any indication that an error has occurred, it just stops.
The last lines I can see are:
ACPI: bus type pci registered
PCI: Using configuration type 1
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: No dock devices found
ACPI: PCI Root Bridge [PCI0] (0000:00)
ACPI: PCI Interrupt Link [LNKA] (IRQs *5 9 10 11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 5 9 10 *11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 5 9 *10 11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 5 *9 10 11)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 5 devices
usbcore: registered new driver usbfs
usbcore: registerd new driver hub
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try 'pci=routeirq". If it helps, post a report
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPS0v4
NetLabel: unlabeled traffic allowed by default
ACPI: DMAR not present
PCI-GART: No AMC northbridge found.
NET: Registered protocol family 2
I'm not sure if it's waiting for some input from me, or if there is a problem, but nothing happens beyond this point until I power down the virtual machine.

There is no need to burn a DVD because Virtualbox can directly mount and boot from the .iso image you downloaded. It is usually a good idea to check the md5 checksum of your download with the number provided by the download page to verify your download is not corrupted. There are no problems installing any version of Oracle Linux under Virtualbox provided you have the right hardware. I suggest to check the Virtualbox documentation.
Note: This is not a Virtualbox forum.

Installing Oracle Linux 6 For 11g

I'm downloading Oracle Linux 6,2 64-bit with the single intention to simply install Oracle Database 11g Enterprise Edition and I've never used or installed Oracle Linux before. I know that in order to install Oracle 11g database, I will need to have some kind of graphic utility like X but I do not need a Desktop Environment like Gnome or KDE (which is not permitted on servers per company policy). Can someone tell me what exactly or which specific options I will need to minimally install Oracle database 11g? I don't want to install the entire DVD content to my server but rather know what packages are required and ONLY install those. I don't know if the Linux installer has a fairly self explanatory / easy to use options based on me using this system as a database server but if anyone can please help, I'd greatly appreciate it!

Sorry everyone but I've retured back from vacation to focus back on getting Oracle Database 11.2.0.3 installed on Oracle Linux 6.2 64-bit. I've got the O.S. up and I thought I selected all the correct / required packages to perform the standard installation using the Universal Installer but it's not working for some reason. I'm unable to forward my 'xclock' session from the database server host to my workstation (Ubuntu 12.04 Linux). When I open a terminal window on my Ubuntu Linux machine and type 'xclock', the application opens w/o any issues. When I SSH into my Oracle database server and attempt to forward the X11 session over to my machine, I get:
carlos@ghost:~$ ssh -x carlos@oracledb
carlos@oracledb's password:
[carlos@oracledb ~]$ xclock
Error: Can't open display:
[carlos@oracledb ~]$ logout
Connection to oracledb closed.I obviously have the application 'xclock' and all required dependencies installed but for some reason it doesn't forward from my Oracle server to my workstation so that I can start the installation...
Below is a list of all installed packages on Oracle Linux that have 'xorg-x11*' in their package header name:
[root@oracledb ~]# rpm -qa | grep -i "xorg-x11*"
xorg-x11-drv-qxl-0.0.14-13.el6_2.x86_64
xorg-x11-drv-v4l-0.2.0-4.0.1.el6.x86_64
xorg-x11-drv-savage-2.3.2-1.0.1.el6.x86_64
xorg-x11-drv-i740-1.3.2-2.0.1.el6.x86_64
xorg-x11-drv-sisusb-0.9.4-1.0.1.el6.x86_64
xorg-x11-drv-acecad-1.5.0-3.0.1.el6.x86_64
xorg-x11-xkb-utils-7.4-6.el6.x86_64
xorg-x11-apps-7.4-10.el6.x86_64
xorg-x11-drv-openchrome-0.2.904-4.el6.x86_64
xorg-x11-drv-penmount-1.5.0-2.el6.x86_64
xorg-x11-drv-nouveau-0.0.16-13.20110719gitde9d1ba.el6.x86_64
xorg-x11-drv-ati-6.14.2-7.el6.x86_64
xorg-x11-drv-mouse-1.7.0-4.el6.x86_64
xorg-x11-drv-fpit-1.4.0-2.el6.x86_64
xorg-x11-drivers-7.3-13.3.el6.x86_64
xorg-x11-xinit-1.0.9-13.el6.x86_64
xorg-x11-server-utils-7.5-5.2.el6.x86_64
xorg-x11-xauth-1.0.2-7.1.el6.x86_64
xorg-x11-utils-7.4-8.el6.x86_64
xorg-x11-drv-ati-firmware-6.14.2-7.el6.noarch
xorg-x11-server-common-1.10.4-6.el6_2.3.x86_64
xorg-x11-server-Xorg-1.10.4-6.el6_2.3.x86_64
xorg-x11-drv-r128-6.8.1-3.0.1.el6.x86_64
xorg-x11-drv-vmware-11.0.3-1.0.1.el6.x86_64
xorg-x11-drv-i128-1.3.4-1.0.1.el6.x86_64
xorg-x11-drv-trident-1.3.4-1.0.1.el6.x86_64
xorg-x11-drv-glint-1.2.5-1.0.1.el6.x86_64
xorg-x11-drv-apm-1.2.3-2.0.1.el6.x86_64
xorg-x11-drv-ast-0.91.10-1.0.1.el6.x86_64
xorg-x11-drv-siliconmotion-1.7.5-1.0.1.el6.x86_64
xorg-x11-drv-dummy-0.3.4-1.0.1.el6.x86_64
xorg-x11-drv-wacom-0.10.5-14.0.1.el6.x86_64
xorg-x11-drv-sis-0.10.3-1.0.1.el6.x86_64
xorg-x11-drv-evdev-2.6.0-2.el6.x86_64
xorg-x11-drv-synaptics-1.4.1-3.el6.x86_64
xorg-x11-drv-intel-2.16.0-1.el6.x86_64
xorg-x11-drv-mga-1.4.13-3.el6.x86_64
xorg-x11-drv-cirrus-1.3.2-2.el6.x86_64
xorg-x11-drv-mutouch-1.3.0-2.el6.x86_64
xorg-x11-drv-hyperpen-1.4.1-2.el6.x86_64
xorg-x11-drv-fbdev-0.4.2-2.el6.x86_64
xorg-x11-drv-vmmouse-12.7.0-1.el6.x86_64
xorg-x11-drv-keyboard-1.6.0-1.el6.x86_64
xorg-x11-drv-vesa-2.3.0-2.0.1.el6.x86_64
xorg-x11-drv-tdfx-1.4.3-2.0.1.el6.x86_64
xorg-x11-drv-rendition-4.2.4-1.0.1.el6.x86_64
xorg-x11-drv-mach64-6.9.0-1.0.1.el6.x86_64
xorg-x11-drv-voodoo-1.2.4-1.0.1.el6.x86_64
xorg-x11-drv-s3virge-1.10.4-2.0.1.el6.x86_64
xorg-x11-drv-xgi-1.6.0-11.0.1.el6.x86_64
xorg-x11-font-utils-7.2-11.el6.x86_64
xorg-x11-drv-void-1.4.0-1.el6.x86_64
xorg-x11-drv-aiptek-1.4.1-2.el6.x86_64
xorg-x11-drv-nv-2.1.18-2.el6.x86_64
xorg-x11-drv-elographics-1.3.0-2.el6.x86_64

RAC with Oracle Linux (Using firewire drive)

Guys
Did anyone install RAC (10g or 11g) using Oracle Linux using firewire drive? Does Oracle linux support firewire technology?
Please share your experience.
Regards
PJ

Start here
Installing Oracle Database 11g Release 1 on Enterprise Linux 5 (32- and 64-bit)
http://www.oracle.com/technology/pub/articles/smiley-11gr1-install.html#kernel
My installation:
[root@linux3 OCFS2]# uname -a
Linux linux3 2.6.18-8.el5 #1 SMP Tue Jun 5 23:11:13 EDT 2007 i686 i686 i386 GNU/Linux
OCFS2
-rw-r--r-- 1 root root 274826 May 2 17:22 ocfs2-2.6.18-8.el5-1.2.8-2.el5.i686.rpm
-rw-r--r-- 1 root root 9123303 May 2 17:23 ocfs2-2.6.18-8.el5-debuginfo-1.2.8-2.el5.i686.rpm
-rw-r--r-- 1 root root 1144294 May 2 17:27 ocfs2-tools-1.2.7-1.el5.i386.rpm
Others rpms needed in my case after installation
-rw-r--r-- 1 root root 39297 Jun 7 2007 rsh-server-0.17-37.el5.i386.rpm
-rw-r--r-- 1 root root 126577 Jun 7 2007 xinetd-2.3.14-10.el5.i386.rpm
lsmod
parport 37513 2 lp,parport_pc
snd_page_alloc 13641 2 snd_intel8x0,snd_pcm
serio_raw 10693 0
ohci1394 32964 1
ieee1394 83252 2 sbp2,ohci1394 <-
ohci is part of kernel modules !
./modules/2.6.18-8.el5/updates/drivers/ieee1394/sbp2.ko
ext3 123081 1
jbd 56553 2 ocfs2,ext3
ehci_hcd 32845 0
When the driver was loaded succesful looks similar to this, please verify other configuration like serialize_io
[root@linux3 sysconfig]# dmesg | grep 1394
ieee1394: no version for "struct_module" found: kernel tainted.
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[201] MMIO=[ea125000-ea1257ff] Max Packet=[2048] IR/IT contexts=[4/8]
ieee1394: The root node is not cycle master capable; selecting a new root node and resetting...
ieee1394: Node added: ID:BUS[0-00:1023] GUID[0030e002e04546d5]
ieee1394: Host added: ID:BUS[0-01:1023] GUID[001106664001995a]
ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1)
ieee1394: sbp2: Try serialize_io=0 for better performance
scsi0 : SBP-2 IEEE-1394
ieee1394: sbp2: Logged into SBP-2 device
ieee1394: Node 0-00:1023: Max speed [S400] - Max payload [2048]
and here we are!
[root@linux3 etc]# fdisk -l
Disk /dev/hda: 40.0 GB, 40020664320 bytes
255 heads, 63 sectors/track, 4865 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/hda1 1 1824 14651248+ 83 Linux
/dev/hda2 * 1959 4699 22017082+ 83 Linux
/dev/hda3 4700 4865 1333395 82 Linux swap / Solaris
/dev/hda4 1825 1958 1076355 82 Linux swap / Solaris
Partition table entries are not in disk order
Disk /dev/sda: 82.3 GB, 82348277760 bytes <= Firewire Disk
255 heads, 63 sectors/track, 10011 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sda1 1 5000 40162468+ 83 Linux
/dev/sda2 5001 6217 9775552+ 83 Linux
/dev/sda3 6218 7434 9775552+ 83 Linux
/dev/sda4 7435 10011 20699752+ 83 Linux
Please let me know if you need more information.
J

Cannot install Oracle Linux on HP DC 7700 series PCs

Hi,
Im trying to install Oracle Linux on DC 7700 series and installation got hang up at the point where the "PCI Probing starts"
Please do provide a remady for this !
Nuwan

1). Oracle 9i will be easily installed on these linux ?It will install easier on Oracle Linux than any other.
2). These linux distro is more or less same like other linux distros (eg: ubuntu, fedora) i means i do and install other utilities and software for other type of usages ??Since OEL is intended as an O/S for mostly servers, it may not include support for the very latest desktop / laptop hardware. It may not include consumer-type applications like MP3 players either.
3). I will not have to pay for any type of repo access or packages installation ???No, you are welcome to download, install and use OEL without any charge. You can get it from the edelivery.oracle.com site, or access it piecemeal at the http://public-yum.oracle.com web site.
If you want support or updated RPM packages since that distribution release, only then will you need to purchase a subscription.
So, use the original distribution RPM packages for free (edelivery or public-yum.oracle.com), only need paid subscription for updated RPM's or support.
4). I will be install other locally downloaded softwares ( .rpm, .sh. .bin) files like netbeans, amrok wiht avi and mp3 capabilities for playing video tutorials, open office, acrobat reader, flash, burning software, gimp, matlab and saas ??????In general, yes, you can install software intended for Red Hat Enterprise Linux or Oracle Enterprise Linux.
Check out the EPEL project (Extra Packages for Enterprise Linux) at http://fedoraproject.org/wiki/EPEL for an additional repository which may already have the extra software you are looking for.

Installed oracle linux on VM6.0 with issue

I tried to install oracle linux on my PC on VM 6.0, after system self-test , VM system exhibit a error message: No useable disks have been found
but I have allocate 80G for this installation and 1G mem to operate! how am I doing for the next step??
please help!!

[http://file.itpub.net/forum/201110/24/104913tsn9fteytqknoqyt.jpg]
VM6.0 is vmware workstation, I use that kind of software to set up oracle linux on my windows system, so that it can simulate Linux system operation, just like use Virtual box to set up Linux, and the VM loaded Linux ISO image, I chosen upgrade/installation and language with set up direction step by step, and after loading programme checked the local disk space, it showed me with this error message what I concern
Edited by: user8648682 on 2011-10-23 下午10:22

How connect the oracle/Linux using ODBC

I want to connect the Oracle which install on Linux using Odbc, so my win98 machine can connect with the oracle.
But I don't know how to do ? May I install some Odbc driver in the Linux machine? and install odbc driver in my win98 machine?
my email: [email protected]

You may use this way:
1. Start on the server (Linux) Net*8 listener (lsnrctl start)
2. Install on the client (win98) Net*8 and configure it (Net8 Easy Configuration)
3. Install on the client (win98) ODBC drivers for ORACLE (by ORACLE or others) and configure it

Is it possible to install Oracle linux from usb?

Hi Guys,
Is it possible to install Oracle linux from usb? If yes, may I know the exact procedures to do so.
I am using linux ubuntu and I tried to make a bootable usb with the dvd iso of oracle linux 6 using Unetbootin software. The installation started well.
but after formatting the harddisk, I got an error as shown below
Missing ISO 9660 image
The installer has tried to mount image #1, but cannot find it on the hard drive.
I think ISO 9660 image is something connected with the CD image or something. But not sure...
Can anyone help me out with this situation.... Thank you..
Edited by: 839414 on Feb 24, 2011 12:47 AM

HI
I know this is an old post but has anyone resolved this issue? I am trying to install OEL 6U4 via usb with no luck. Keep getting Missing ISO 9660 Image. I have tried all the tools under the sun to write it to USB, also tried copying the iso to the Boot disk.. as stated above... no luck ....
I have checked the installation files using md5 and they are fine... just in case downloaded it again as well as 6U3 and 6U0.
I have installed almost every version of linux there is... but OEL is definitely the most difficult and after 3 days, I am ready to give up. Any idea?
BTW. I am using utilities on windows 8 to write the iso to USB.
Thanks
P

We could not able to install Oracle Linux 64 bit version 5.0 in graphical mode

We could not able to install Oracle Linux 64 bit version 5.0 in graphical mode. We are getting the error message as
"Probing for video card :Intel corporation Unknown device 0152"
We also tried as
boot: Linux vga=2
boot linux resolution 1024x768
boot Linux noprob
boot Linux skipdd
But every time we got this message
NB: We could able to install in text mode as
boot: Linux text.
But our requirement Linux in graphical mode

1344675 wrote:
We could not able to install Oracle Linux 64 bit version 5.0 in graphical mode. We are getting the error message as
"Probing for video card :Intel corporation Unknown device 0152"
We also tried as
boot: Linux vga=2
boot linux resolution 1024x768
boot Linux noprob
boot Linux skipdd
But every time we got this message
NB: We could able to install in text mode as
boot: Linux text.
But our requirement Linux in graphical mode
Why is your "requirement" to install in graphical mode? Once you are past the installation itself, the only thing that buys you is that your server will have been configured to boot up to runlevel 5, running a graphical desktop (gnome or kde, I forget which). And what does THAT buy you on a server?
I do not run ANY of my Linux servers "in graphical mode" -- running a graphical desktop. Nor did I run a graphical desktop when I had Solaris, AIX, or HP-UX servers.

How could I install Oracle Linux 6.3.

When I am going to install oracle Linux 6.3 in my machine after selecting the installation option(i.e "Install or Upgrading the existing system" or "Install system with basic video driver") nothing is appearing except a blank screen. Please help.
My machine config is as bellow.
Mother Board : Asus P5Q Pro
Processor : Core2Duo 2.8GHz
RAM : 6GB
Video Card : Nvdia GForce 9 series

Nvdia GForce 9 series is not a server type video card. Oracle Linux and other RHEL derivatives are designed for server hardware. You might want to keep this in mind because there may be additional problems. Your mileage will vary.
Regarding your problem, it sounds like you are experiencing a typical compatibility or support problem with your video card DRM. A common way around this problem is to disable support for Kernel Mode Setting (KMS). You can test this by setting the nomodeset Linux kernel parameter by pressing any key at the very system startup to enter the grub bootloader menu.

Installing Oracle Linux 5.8

Hi ,
I wish to remove Win7 (32 bit Home Edition) and install Oracle Linux 5.8 in it.
Configuration of my workstation :
1. 4GB RAM
2. 500 GB HDD
3. Intel Core i5 processor (2.27 GHz * 2).
Could you please tell me how to install the this ? Also, please suggest a good anti-virus for it. Also, is VM required to be installed before installing Oracle Linux ?
Thanks,
Haider

Haider Hussain wrote:
Hi ,
I wish to remove Win7 (32 bit Home Edition) and install Oracle Linux 5.8 in it.
Configuration of my workstation :
1. 4GB RAM
2. 500 GB HDD
3. Intel Core i5 processor (2.27 GHz * 2).
Could you please tell me how to install the this ? Also, please suggest a good anti-virus for it. Also, is VM required to be installed before installing Oracle Linux ?
Thanks,
HaiderIf you want to remove the existing Windows installation and replace it with Oracle Linux any other operating system, then you need to have the installation media for that new OS on a CD, and boot from there. You need to also make sure the new OS supports the hardware on which you intend to install. This question would be better asked in the [url https://forums.oracle.com/forums/forum.jspa?forumID=822] Oracle Linux forum
If you want to remove the existing Windows installation and replace it with Oracle Linux any other operating system, then a vm is not requried. A vm is required to create the new OS as a vm, which runs as a task under the host OS.
Edited by: EdStevens on Jan 29, 2013 11:18 AM

Is it possible to Install Oracle Linux 6.2 64-bit in Itanium Server?

Hi Gurus,
I have 2 intel Itenium servers of same configuration. I like to install Oracle Linux 6.2 64-bit in both Itanium Servers and Install Oracle 11gr2 RAC there. I have installed OEL 6.2 64-bit in x86-64 architecture server and installed Oracle 11gr2 there, but never done that in Itenium servers. Now I am confused if it is possible. To know the answer is very important for me and earlier the better.
Regards
Hasan Al Mamun
Systems Analyst
Bangladesh Bank
Dhaka, Bangladesh.

HasanAlMamun wrote:
I have 2 intel Itenium servers of same configuration. I like to install Oracle Linux 6.2 64-bit in both Itanium Servers and Install Oracle 11gr2 RAC there. I have installed OEL 6.2 64-bit in x86-64 architecture server and installed Oracle 11gr2 there, but never done that in Itenium servers. Now I am confused if it is possible. To know the answer is very important for me and earlier the better.It's not possible. We do not provide Oracle Linux 6 for Itanium.

Problem installing Oracle Linux Release 5 Update 2 from Oracle e-Delivery

Hello
I have been trying to install Oracle Linux Release 5 Update 2 from Oracle e-Delivery so that I can install Oracle 11g express edition beta.
Here are the steps that I took and the problem that I am having:
1. I downloaded the file, unzipped the file twice, which gave me 3,042 files and 13 folders with the total size = 3.07 GB.
2. I put in the DVD and restarted my PC hoping that my PC will boot from the DVD, but instead Window started.
I reported this issue to tech support from e-Delivery, but they referred me to contact you. Please assist.
Julia

3,042 files and 13 folders with the total size = 3.07 GBWhich download .zip did you choose from edelivery? Under linux-x64 I peeked "Oracle Linux Release 5 Update 2 for x86_64 (64 Bit) - DVD" file V15099-01.zip downloaded, it has just the one .iso file. You'll need to burn that to DVD, but with burn s/w that handles ISO files.
Also keep in mind you'll need 64 bit hardware (amd/intel 64? itanium? those are different), the only *nix platform I've got handy to try it out is -x86 :(

Installing Oracle linux 6 using kickstart method

Similar Messages

Maybe you are looking for