Installing Oracle VDI 3.3 into a zone on Solaris x86
Hi everyone,
I'm trying to install Oracle VDI into a zone on an Oracle Solaris Express x86 machine. When I unzip the installer and run ./vda-install in the top dir I get this error:
Oracle VDI 3.3 Installation
+ Installing Oracle VDI Core...
+ Installing Oracle VDI Center Agent...
+ Installing MySQL Database...
+ Installing Oracle VDI Web server...
+ Installing Oracle VDI Manager...
+ Installing RDP Broker...
+ Installing Sun Ray Client...
+ Installing Java Runtime Environment...
+ Installing Sun Ray Server...
Error: There was a problem installing Sun Ray Software 5
Check '/var/sadm/install/logs/vda-install.2011_08_26_19:19:04.log' for details.
Error: There was a problem installing Sun Ray Software 5
Check '/var/sadm/install/logs/vda-install.2011_08_26_19:19:04.log' for details.
It seems that I cannot install Sun Ray Server into a non-global zone. Well that's fine by me provided I don't actually need it.
And her's my question: what of the above do I actually need?
Günther
I guess, it's clear that you need a valid support contract for your Hardware, otherwise your in troubles. A not so bad article about that you kind find at http://www.ypass.net/blog/2010/04/solaris-licensing-changes-the-real-story/
4.) When you purchase hardware, you receive an addendum to the entitlement that grants that piece of hardware perpetual, non-transferable license and entitlement to Solaris.
and additional ...
Sun Servers with a Support Contract
- For people running Solaris on Sun hardware with a Sun hardware support contract, your support contract grants you rights to run future versions of Solaris.
Similar Messages
-
How to install Oracle HTTP Server 10.1.3.0 on Solaris 10
Hi !
I am new to solaris 10 and i want to install oracle HTTP server on solaris 10.
Kindly can any one share steps/documents how to prepare my system for installation
uname -r = 5.10
my user=oracle fro installation
group=oinstall oracle user group
Shell = bin/sh bourn shell
no variable defined in .profile file OR at any place
my istallation directory=> OracleHome ==> /home/oracle/OracleAs_1
my oraInventory directory=> orainventory ==> /opt/ora/oraInventory
following commands executed using root
chown -R oracle:oinstall /home/oracle
chown -R oracle:oinstall /opt/ora
chmod -R 777 /home/oracle
chmod -R 777 /opt/ora
============================
executing setup using oracle user
./runInstaller -executeSysPrereqs command output==> OK/Pass I dont have patch 118345-03
As patch 118345-03 is not required for the solaris 10with kernal patch/update 5.
./runinstaller and installation type= Advance => OC4j was installed successful but http server gives error.
HTTP server configuration assistant Fails. Setup doesnot complete.
error ==> http server fails to start Managed processes after the maximun retry limit.
error status 206
**** see HTTP_Server~1.log in opmn/logs folder. nothing in log except startprocess and stop process
**** Apache/Apache/logs don't have any LOG or httpd.id file.
========================================
When i start Apache using apactlstart.sh it runs and i can access http://localhost:777 ===> working with message use opmnctl
Need Help :) Thanks in advanceHere is such a description:
http://onlineappsdba.com/index.php/2007/06/20/install-oracle-soa-suite-101310/
Jon petter -
How to install Oracle Grid Agent 11g into windows hosts ?
Hi there, I was not able to deploy management agents into windows hosts machines !
I followed steps below and I am getting these errors :
On windows 2003 server, I have downloaded grid agent here :
D:\grid\Windows_X64_Grid_Control_agent_download_11_1_0_1_0\windows_x64\agent
I have setup.exe file ! When I double click it, I got this message :
Only silent installation is supported search help.
Well, I did a lot of times setup.exe -silent -responseFile <path>additional_response.rsp and the setup process tells me that I am not following the security procedures.
I am newbie on Grid!
I don´t want deploy agent using deployment wizard due to security resctrictions, they do not allow openssh servers on windows servers.
Have you guys succeeded with this installation ? I mean, install fresh agent on single target windows server machine!
I would appreciate any help.
Tks.
Edson - CLAROEdson,
what I would do is go for the cloning option.
On the OMS Server an Agent has been installed as part of the OMS installation.
Stop this Agent
AGENT_HOME/bin/emctl stop agent
Create a zip file from the agent11g folder
Copy it to a server where you want to install the Agent
unzip the folder in the location where you want to install
Restart the Agent you had stopped on your OMS server
AGENT_HOME/bin/emctl start agent
On the destination server
Then from the AGENT_HOME/oui/bin
runInstaller -clone -forceClone ORACLE_HOME=<full path of Agent Folder> ORACLE_HOME_NAME=OracleHomeAgent11g -noconfig -silent b_chainedInstall=false oracle.sysman.top.agent:s_installType=AGENT
Then from AGENT_HOME/bin/agentca -f
AGENT_HOME/root.sh (Under Unix this needs to be run as user root, not sure if this procedure is the same under Windows)
This is based on the procedure described in MOS note : How to Clone a Management Agent And Known Issues [ID 579156.1] which referes to a 10.2.0 Agent, but I have been able to use this procedure under Windows with a 11.1 Agent as well.
Goodluck
Regards
Rob
http://oemgc.wordpress.com -
Unable to install Oracle 8i personal edition into W2K pro
I am unable to install 8i personal edition Release 3 onto my W2K machine. I download the zip file and unzip it into (c:/OracleInstall) a folder I have created on my c:/ drive. When i click on the setup.exe file it opens up. When I click on the install button the GUI disappers and nothing occurs. I have attempted to burn it onto a CD_Rom and install through the control panel and the same occurs.
I am not sure what is causing this problem. Is there any why I could request the software in a CD as opposed to a zip file? What could be causing this problem?I am unable to install 8i personal edition Release 3 onto my W2K machine. I download the zip file and unzip it into (c:/OracleInstall) a folder I have created on my c:/ drive. When i click on the setup.exe file it opens up. When I click on the install button the GUI disappers and nothing occurs. I have attempted to burn it onto a CD_Rom and install through the control panel and the same occurs.
I am not sure what is causing this problem. Is there any why I could request the software in a CD as opposed to a zip file? What could be causing this problem? Is the machine a P4? there is a known problem
I don't know about his machine, but mine is a P4. Where do I find this information about this problem? And is there a fix? I need to install the NET8 Assistant. -
Installing Oracle 9iR2 32 bit on Red Hat 3 AS x86-64
Good day all,
I have troubles installing 9iR2 Oracle 32 bit on Red Hat 3 AS 64 bit. All prerequisites are done (according to http://www.puschitz.com/InstallingOracle9i) but installation encounters abnormal termination on the stage where you press Install button. The indicator actually goes to 100% at once and then it opens window where I have to input ORACLE_HOME again.
In Installation log it says the following
/opt/oracle/9.2.0/inventory/filemap/./files.map (No such file or directory)
Unable to read the list of homes from the inventory.
Note that Installtion is being made from HDD and I also changed JRE used bu Oracle installer to my own jre on the machine since Oracle jre cannot launch oracle installer on this machine at all.
JRE path settings can be changed in Disk1/install/linux/oraparam.ini file in the following string
JRE_LOCATION=
Looking forward to any ideas you have.Good day all,
I have troubles installing 9iR2 Oracle 32 bit on Red Hat 3 AS 64 bit. All prerequisites are done (according to http://www.puschitz.com/InstallingOracle9i) but installation encounters abnormal termination on the stage where you press Install button. The indicator actually goes to 100% at once and then it opens window where I have to input ORACLE_HOME again.
In Installation log it says the following
/opt/oracle/9.2.0/inventory/filemap/./files.map (No such file or directory)
Unable to read the list of homes from the inventory.
Note that Installtion is being made from HDD and I also changed JRE used bu Oracle installer to my own jre on the machine since Oracle jre cannot launch oracle installer on this machine at all.
JRE path settings can be changed in Disk1/install/linux/oraparam.ini file in the following string
JRE_LOCATION=
Looking forward to any ideas you have. -
ORACLE TABLESPACE CREATION PROBLEM IN SAN STORAGE FROM SOLARIS X86 Machine
Hi everybody,
i am new in this forum and i am also new in solaris operating system with SAN storage.
I am using oracle database 10g in a sun x86 machine with solaris 5.10.
While i am trying to create a tablepsace in SAN storage in a mount point of 2.1TB the following error occurs:
SQL> create tablespace test datafile '/appbrm01/oracle/oradata/test1.dbf' size 100M;
create tablespace test datafile '/appbrm01/oracle/oradata/test1.dbf' size 1M
ERROR at line 1:
ORA-01119: error in creating database file '/appbrm01/oracle/oradata/test1.dbf'
ORA-27037: unable to obtain file status
Intel SVR4 UNIX Error: 79: Value too large for defined data type
Additional information: 45
SQL>
But when i am trying to create a tablepsace in SAN storage in a mount point of 1.8TB it works fine.
So, please if any body can help me to solve this issue i will be very glad
Thanks
ReshadAlso, Datapump from NAS device would perform slow.
Take a look at this:
10gR2 "database backup" to nfs mounted dir results in ORA-27054 NFS error
Note:356508.1 - NFS Changes In 10gR2 Slow Performance (RMAN, Export, Datapump) From Metalink. -
How to install Oracle 10g on zone
Hi,
I'm new in zone technology.
I have a problem with installing Oracle 10g R2 on previously created zone.
I am not able to run Oracle installer.
Is it possible to install Oracle 10g using OUI GUI?
I have exported DISPLAY variable but I there is not available xhost + command.
Normal installing Oracle 10g on Solaris I use xhost + to run installer.
But in zone this command is not available.
Could you please tell me the solution to install Oracle 10g on zone?
Kind regards,
Danielxhost appears not to work if you are zlogin.
What you may want to try is creating a Unix user inside the zone and then ssh into the zone as if it was a regular machine.
Rich -
Install Oracle 10.1.2 On Fedora Core 6
Hi
I need help , I have tried to install Oracle 10.1.2 into Fedora Core 6 and I tried to check require package. It miss some packages follow
openmotif openmotif-2.2.2-16
compat-db compat-db-4.0.14.5
compat-gcc compat-gcc-7.3-2.96.122
compat-gcc-c++ compat-gcc-c++-7.3-2.96.122
compat-libstdc++ compat-libstdc++-7.3-2.96.122
compat-libstdc++-devel compat-libstdc++-devel-7.3-2.96.122
Where can I download it ?
And it has the problem or not if I install Oracle into fedora core 6?
Thank in advance.
PasuwatHere: http://mirrors.fedoraproject.org/publiclist/Fedora/6/i386/
-
Error installing Oracle Developer 10g R2
First off, please let me know if this is the wrong forum.
I'm trying to install Oracle Dev 10g R2 on a Windows XP SP3 x86 computer, but I'm getting an error every time I start it. We have it extracted to two folders, one for disk 1 and one for disk 2. I go into disk 1, install, and click setup.exe. The command prompt comes up, I can see it say everything passes, then after maybe 10 seconds it crashes while trying to load the Oracle Universal Installer. The error message is: "An unhandled win32 exception occurred in setup.exe [2320]".
I only have Visual Studio 2005 installed right now (we're trying to create a base image to make system deployment easier, and the dev that needs this particular laptop requires a different version of VS than the rest of the devs so I haven't installed 2008 or 2010 yet). Could that be the cause? Does 10g R2 require VS 2008 or 2010 to be installed or something?
Any help would be greatly appreciated.
Steve
Edited by: user13479334 on Dec 14, 2010 12:03 PMI re-imaged the laptop, and the install went through this time.
-
Installation of Oracle VDI 3.4.1 fails at applying the Sun Ray patch
Downloaded VDI 3.4.1 for Solaris, checked md5 OK against download page, attempted a freash installation rather than upgrade and it failed at applying the Sun Ray patch.
Solaris 10 u9 x86 full installation with recommend patches (OK its a ESXi 64 bit virtual machine, but need to test before I try it on the real hardware)
Fresh installation of Solaris & patches (automated via JET), which works fine for installing VDI 3.4
VDI 3.4.1 fresh install
unzip -q p14226229_34_Solaris86-64.zip
cd vda_3.4.1_solaris_amd64
+ Installing Sun Ray Server...
Error: There was a problem installing Sun Ray Software 5.3.1.0
Check '/var/sadm/install/logs/vda-install.2012_07_26_15:46:10.log' for details.
See the log file '/var/sadm/install/logs/vda-install.2012_07_26_15:46:10.log' for additional information.
I check the log file and its failing to install patch 149156-01, looking at the patch log there is a message about attempting to install the same architecture and version of a package which is already installed, then a message from checkinstall "........<full patch to check install>/checkinstall: cannot open"
So has anyone else actually downloaded and installed Oracle VDI 3.4.1 on Solaris 10 u9 x86 successfully?
PaulOK went back to Oracle VDI 3.3.2 and it was still a problem on this machine. Turns out I made /software where the media is installed a ZFS partition with a quota of 5g (which hasn't hit a limit, its used less than 1g).
So the real question is why Oracle VDI won't install from a ZFS partition?
# This works fine!
mkdir /software
mkdir /software/vdi_332_Solaris86-64
cp vdi_332_Solaris86-64.zip /software
cd /software/vdi_332_Solaris86-64
unzip -q ../vdi_332_Solaris86-64.zip
cd /software/vdi_332_Solaris86-64/vda_3.3.2_solaris_amd64
./vda-install
# This Fails !
zfs create -o mountpoint=/software -o quota=5g rpool/software
mkdir /software/vdi_332_Solaris86-64
cp vdi_332_Solaris86-64.zip /software
cd /software/vdi_332_Solaris86-64
unzip -q ../vdi_332_Solaris86-64.zip
cd /software/vdi_332_Solaris86-64/vda_3.3.2_solaris_amd64
./vda-install
Root is a ZFS partition and unzip -q works fine (I summed all files in both structures and they are the same). There is something in the vda-install that breaks due to it being a separate ZFS partition.
Paul -
Oracle VDI 3.3 Directory access with Windows2008 Active Directory
Hi
can some body help me to solve this issue?
I install oracle VDI 3.3 and I configure Windows2008 Active Directory for authentification.
I made some test in command line
kinit -v user
and I received the message "Authenticated to Kerberos v5"
but when I tried to create a company to do another configuration I receive the following error:
Unable to Connect to User Directory
Failed to connect, no servers available.
BRI am in the same situation and have tried everything. I am using VDI 3.4 and able to authenticate using knit command but cannot setup up my company.
AD is 2011 Small Business Server and the domain is domain.local
Any help would be appreciated. Thanks -
How to install Oracle 10g Release 2 (10.2) for RHEL 5
Hello Guys,
I want to install Oracle® Database 10g Release 2 (10.2) for Linux x86-64 in RHEL 5
Please experience people guide me ... please don't give me http://download.oracle.com/docs/cd/B19306_01/install.102/b15667/toc.htm (Oracle® Database Installation Guide 10g Release 2 (10.2) for Linux x86-64) link i already gone through but it's to much in depth and not able to understand what is that i can use from this.
My Machine is having 12GB RAM and it's 64bit machine.
So please provide me steps that only relate to my oracle installation. I just want to do simple installation without database and my machine not have graphical interface also.
Send me your generic steps that i can run on my machine. if you want information about my system specification please ask.
So please people help me out... i am really thankful to you guys .....
Thanks ,
ORACLE DBA PThat also good idea man. thanks for your valuable advice.
I have confusion here ...
3. Changes to be made to Kernel parameters
After installing above mentioned packages, we need to change some Kernel parameters and make them match to Oracle requirements. Parameters which should be changed are shown below
shmmax 2147483648
shmmni 4096
shmall 2097152
shmmin 1
semmsl 250
semmns 32000
semopm 100
semmni 128
file-max 65536
ip_local_port_range 1024 65000
rmem_default 1048576
rmem_max 1048576
wmem_default 262144
wmem_max 262144
We do all these changes in the /etc/sysctl.conf file by adding these lines to that file:
kernel.shmmax = 2147483648
kernel.shmall = 2097152
kernel.shmmni=4096
kernel.sem=250 32000 100 128
fs.file-max=65536
net.ipv4.ip_local_port_range=1024 65000
net.core.rmem_default=1048576
net.core.rmem_max=1048576
net.core.wmem_default=262144
net.core.wmem_max=262144
Question: What will be my value for this as my system is 64bit so this all parameter is ok if i put all straight ?
----> Setting Shell limits for the Oracle UserTo improve the performance of the software on Linux systems, you must increase the following shell limits for the oracle user:
1. Add the following lines to /etc/security/limits.conf file
oracle soft nproc 2047
oracle hard nproc 16384
oracle soft nofile 1024
oracle hard nofile 65536
2. Add the following lines to /etc/pam.d/login file
session required /lib/security/pam_limits.so
session required pam_limits.so
3. In order to use Oracle Software, we need to make a change in “oracle” user’s buffer size and number of opened file descriptors. In order to do it, we add below lines to /etc/profile file
if [ $USER = "oracle" ]; then
if [ $SHELL = "/bin/ksh" ]; then
ulimit -p 16384
ulimit -n 65536
else
ulimit -u 16384 -n 65536
fi
fi
Question: this things also i need to change ? -
ERROR INSTALLING ORACLE ENTERPRISE 11G in RHEL 63
Dear All:
I am installing Oracle Enterprise 11g in RHEL 6.3, but I got some errors due to components of Red Hat in the section : "PRE_REQUISITE CHECK"
The versions of componentes of RHEL are newer than version required by Enterprise 11g.
package: libaio-0.3.105 Failed
package: compaq-libstdc++-33-3.2.3 Failed
package: libaio-devel-0.3.105 Failed
package: libgcc-3.4.6 Failed
package: libstdc++-3.4.6 Failed
package: unixODBC-2.2.11 Failed
package: unixODBC-devel-2.2.11 Failed
package: pdksh-5.2.14 Failed
I need your help to define what to do? I should omit them? or correct them? how to correct?Hi,
Kindly find the prerequisite packages in the following note
Requirements for Installing Oracle 11gR2 RDBMS on RHEL6 or OL6 64-bit (x86-64) (Doc ID 1441282.1)
If you have newer than defined prerequisites, you can ignore these warnings and continue installation
Thanks,
Krishna -
Hi,
I successfully installed Oracle 10.1.0.2.0 on my Solaris v 5.10 workstation but when I attempt to create a database, I am forced to abort. I receive the following error: ORA-01041: internal error. hostdef extension does not exist.
Please find below the contents of my alert_SID.log files.
I tried to create 2 different databases..
I am really new to oracle and need assistance..
oracle @ SYS02-ZONE01 /opt/oracle/app/oracle/product/rdbms/log > cat alert_orcl.log
Mon Feb 18 05:30:09 2008
Errors in file /opt/oracle/app/oracle/product/rdbms/log/orcl_ora_9762.trc:
ORA-07445: exception encountered: core dump [kcbbnwa()+448] [SIGFPE] [Integer divide by zero] [0x100ECCFE0] [] []
Mon Feb 18 05:30:33 2008
Shutting down instance (abort)
oracle @ SYS02-ZONE01 /opt/oracle/app/oracle/product/rdbms/log > cat alert_bgw.log
Wed Feb 13 05:07:15 2008
Errors in file /opt/oracle/app/oracle/product/rdbms/log/bgw_ora_15107.trc:
ORA-07445: exception encountered: core dump [kcbbnwa()+448] [SIGFPE] [Integer divide by zero] [0x100ECCFE0] [] []
Wed Feb 13 05:29:28 2008
Shutting down instance (abort)
Wed Feb 13 21:49:47 2008
Errors in file /opt/oracle/app/oracle/product/rdbms/log/bgw_ora_6026.trc:
ORA-07445: exception encountered: core dump [kcbbnwa()+448] [SIGFPE] [Integer divide by zero] [0x100ECCFE0] [] []
Wed Feb 13 21:50:47 2008
Errors in file /opt/oracle/app/oracle/product/rdbms/log/bgw_ora_6047.trc:
ORA-07445: exception encountered: core dump [kcbbnwa()+448] [SIGFPE] [Integer divide by zero] [0x100ECCFE0] [] []
Wed Feb 13 21:50:56 2008
Shutting down instance (abort)
Thu Feb 14 00:17:41 2008
Errors in file /opt/oracle/app/oracle/product/rdbms/log/bgw_ora_4285.trc:
ORA-07445: exception encountered: core dump [kcbbnwa()+448] [SIGFPE] [Integer divide by zero] [0x100ECCFE0] [] []
Thu Feb 14 00:18:08 2008
Shutting down instance (abort)
Thu Feb 14 00:18:13 2008
Errors in file /opt/oracle/app/oracle/product/rdbms/log/bgw_ora_4312.trc:
ORA-07445: exception encountered: core dump [kcbbnwa()+448] [SIGFPE] [Integer divide by zero] [0x100ECCFE0] [] []
Thu Feb 14 00:18:49 2008
Errors in file /opt/oracle/app/oracle/product/rdbms/log/bgw_ora_4314.trc:
ORA-07445: exception encountered: core dump [kcbbnwa()+448] [SIGFPE] [Integer divide by zero] [0x100ECCFE0] [] []
Thu Feb 14 00:18:53 2008
Shutting down instance (abort)
Thu Feb 14 00:21:55 2008
Errors in file /opt/oracle/app/oracle/product/rdbms/log/bgw_ora_4393.trc:
ORA-07445: exception encountered: core dump [kcbbnwa()+448] [SIGFPE] [Integer divide by zero] [0x100ECCFE0] [] []
Thu Feb 14 00:22:09 2008
Shutting down instance (abort)
oracle @ SYS02-ZONE01 /opt/oracle/app/oracle/product/rdbms/log >
Ifedolapohttp://www.oracle.com/pls/db102/portal.portal_db?selected=11
Entered ORA-07445 into search
ORA-07445: exception encountered: core dump [string] [string] [string] [string] [string] [string]
Cause: An OS exception occurred which should result in the creation of a core file. This is an internal error.
Action: Contact your customer support representative.
I'm guessing that that means your Oracle CSR. -
Oracle 10g installation in an SPARC 64 bit Solaris 10 server
Good morning,
I'm trying to install Oracle 10g Enterprise Edition in a server with Solaris 10 as operating system. When I run the oui, the prerequisites part is passed but the installation gives me an error telling that the installer can't write in the /tmp directory. Nevertheless, I have writing grants and space enough in that directory, in fact the installer writes the installAction.log in this directory. So I don't understand which can be the problem?
Any suggestions?
Thanks in advance.
Regards,
MabelIt could be you don't have enough free space on the tmp dir.
Check this point from the
Oracle® Database Installation Guide. 10g Release 2 (10.2) for Solaris Operating System (SPARC 64-Bit). Part Number B15690-02
If you determined that the /tmp directory has less than 400 MB of free disk space, then identify a file system with at least 400 MB of free space and set the TMP and TMPDIR environment variables to specify a temporary directory on this file system:
1. Use the df -k command to identify a suitable file system with sufficient free space.
2. If necessary, enter commands similar to the following to create a temporary directory on the file system that you identified, and set the appropriate permissions on the directory:
$ su - root
# mkdir /mount_point/tmp
# chmod a+wr /mount_point/tmp
# exit
3. Enter commands similar to the following to set the TMP and TMPDIR environment variables:
Bourne, Bash, or Korn shell:
$ TMP=/mount_point/tmp
$ TMPDIR=/mount_point/tmp
$ export TMP TMPDIR
C shell:
% setenv TMP /mount_point/tmp
% setenv TMPDIR /mount_point/tmp
~ Madrid.
Maybe you are looking for
-
hello guys i have an hp laptop pavilion g6 i got a problem with my usb cable connected i can't connect through my laptop and installing hardware becomes failed and it appears in the device manager an exclamation point on iphone ..please help me im tr
-
Hi ...sorry friends I am very new to SAP and that's why sending my foolish queries to u ... hope u will not mind. I am using ECC6.0 and here at my end I encountered a strange issue (may be this is std SAP functionality but I couldn't understand the l
-
The process cannot access the file because it is being used by another proc
We are exporting crystal reports into PDF using ExportToHttpResponse (code snippet below) // Getting the type of the report file which has been selected by the user. (which will be REPORT CLASS type) Type objType = Type.GetType("WebApplication
-
Recovery very very slow on the physical standby recently
The standby was running fine for over a year. But recently the recovery became very slow. It took over an hour to apply one archivelog causing the standby falling behind. What could be the cause and solution? Thanks!
-
Nouvel utilisateur d'Adobe photoshop elements 10
Je viens d'acquérir récemment un MAC OS X 10.7.3 et je viens d'installer adobe photoshop elements 10. Comme j'ai l'intention de constituer des diaporamas, je me positionne sur Adobe elements 10 organizer avec mon catalogue photos et à ma grande surpr