Installing Oracle XE 10g on Window server 2008

Hello,
I want to ask if i can install Oracle XE on windows server 2008, if not what releases of Oracle DB can be installed on Win2008 server
Regards,
Tareq

Thank you for your quick answer,
But i want to know are there any steps to install this release or just go through normal steps.
Oracle Database 10g Release 2 (10.2.0.1)
Express Edition for Microsoft Windows
Also i want to install IDS10g R2 ... Can i install it also on the server, if not can i install the OC4J stand alone ??
Thank you.

Similar Messages

Best practice for install oracle 11g r2 on Windows Server 2008 r2

Dear all,
May I know what is the best practice for install oracle 11g r2 on windows server 2008 r2. Should I create a special account for windows for the oracle database installation? What permission should I grant to the folders where Oracle installed and the database related files located (datafiles, controlfiles, etc.)
Just grant Full for Administrators and System and remove permissions for all others accounts?
Also how should I configure windows firewall to allow client connect to the database.
Thanks for your help.

Hi Christian,
Check this on MOS
*RAC Assurance Support Team: RAC Starter Kit and Best Practices (Windows) [ID 811271.1]*
https://support.oracle.com/CSP/main/article?cmd=show&type=NOT&doctype=BULLETIN&id=811271.1
DOC Modified: 14-DEC-2010
Regards,
Levi Pereira

About Install Oracle Access Manager On Windows Server 2008 64bit

hi,
Question 1:
Can I install OAM10g(10.1.4.3.0) on Windows Server 2008 64bit ?
(because OAM10g all is for win32)
(I have tried to install it , but when OHS restart, have errors, so I found the 64bitOS is the trouble...)
Question 2:
If Question1 cannot, Can Oracle Identity and Access Management 11g fix it ?
Help
Thanks.

Does this server use Itanium processors ? See MOS Doc 430677.1 (The image file setup.exe is valid, but is for a machine type other than the current machine.)
Srini

Oracle 11g Client for Windows Server 2008 Relase2 Operating Stystem

Hi,
I am having a server with Operating System as Windows Server 2008 R2 version 64 - bit.
I am using SSRS 2008 which is 64 bit, for retreiving the data from Oracle (which is 11g - 32 bit), I am unable to create data source for Oracle.
I had installed ODAC Components of Oracle 11.1.0.7.20 on the server, but still I am getting the following error:
"The 'OraOLEDB.Oracle.1' provider is not registered on the local machine."
Does any one know how to install Oracle Client 11g on Windows Server 2008 R2 Operating system?

Helios,
It is wonderful that you are polite and encouraging to new people.
While you are responding, could you explicitly direct people to use the correct forum. This has at least 2 benefits:
1) Ensures that the person gets the widest possible amount of assistance;
2) Ensures that the rest of us do not need to waste time on improperly placed questions.
I suggest 'explicitly' since some people do not get the hint, and keep returning to the original thread.
This thread belongs in 'Database - General' or 'Database - Install'.

Installing Oracle 10g on Windows Server 2008

Hi,
I want to install Oracle 10g on Windows Server 2008. As per Oracle, I should install 10.2.0.3 and then apply patchset 10.2.0.4.
For that, one has to sign in to metalink which is possible only for customers. I am
using Oracle only for educational purposes for now. Is there any other way of using Oracle 10g on Windows 2008?
Thanks,
Vladi

Of course if you don't have support and for educational purpose only , you should compromise a little by either install other OS or get virtual machine like VMware.
Or stay with 10.2.0.3, that should work in most cases.

Is it Possible to install ODDC 32 bit on Windows Server 2008 R2(64bit)?

Hi All,
Is it Support to Install ODDC 32 bit on Windows Server 2008 R2(64 bit).
I am Posting this bcoz I did not found any ODDC related Blogs.
Please help on this
Thanks,
Raj

The certification matrix ( http://www.oracle.com/technetwork/middleware/webcenter/content/odc-cert-matrix-214688.pdf ) does not mention OS for ODDC Server, but as ODC is certified for Win Server 2008, R2, 32 or 64 bit, I believe the answer is yes.
Make sure, however, that you ODDC clients run on a different OS (see Exceptions).

Problem after installing Oracle DevSuite 10g on Windows 7 (64-bit)

Hi All,
I have successfully installed Oracle DevSuite 10g on Windows 7 -64 bit machine.
But when I open the existing .rdf file which is having around 3MB file... report builder is getting closed automatically. And the same is working for the .rdf file having just 100 KB file.
Can anyone please guide me thru?
Thanks,
Harish Nunna

5983622     PLACEHOLDER BUG FOR AS/DS 10.1.2.3 PATCHSET RELEASE     10.1.2.3     IBM AIX on POWER Systems (64-bit) (American English)     General     Oracle Fusion Middleware Family     Apr 8, 2008     2.1 GB
5983622     PLACEHOLDER BUG FOR AS/DS 10.1.2.3 PATCHSET RELEASE     10.1.2.3     Oracle Solaris on x86 (32-bit) (American English)     General     Oracle Fusion Middleware Family     Aug 29, 2008     1.6 GB
5983622     PLACEHOLDER BUG FOR AS/DS 10.1.2.3 PATCHSET RELEASE     10.1.2.3     IBM: Linux on POWER Systems (American English)     General     Oracle Fusion Middleware Family     Jul 17, 2008     1.1 GB
5983622     PLACEHOLDER BUG FOR AS/DS 10.1.2.3 PATCHSET RELEASE     10.1.2.3     Microsoft Windows Itanium (64-bit) (American English)     General     Oracle Fusion Middleware Family     Jun 3, 2008     2 GB
5983622     PLACEHOLDER BUG FOR AS/DS 10.1.2.3 PATCHSET RELEASE     10.1.2.3     HP Tru64 UNIX (American English)     General     Oracle Fusion Middleware Family     May 16, 2008     1.7 GB
5983622     PLACEHOLDER BUG FOR AS/DS 10.1.2.3 PATCHSET RELEASE     10.1.2.3     Linux Itanium (American English)     General     Oracle Fusion Middleware Family     May 14, 2008     1.6 GB
5983622     PLACEHOLDER BUG FOR AS/DS 10.1.2.3 PATCHSET RELEASE     10.1.2.3     IBM: Linux on System z (American English)     General     Oracle Fusion Middleware Family     Sep 15, 2009     1.5 GB
5983622     PLACEHOLDER BUG FOR AS/DS 10.1.2.3 PATCHSET RELEASE     10.1.2.3     Linux x86 (American English)     General     Oracle Fusion Middleware Family     Apr 5, 2008     1.7 GB
5983622     PLACEHOLDER BUG FOR AS/DS 10.1.2.3 PATCHSET RELEASE     10.1.2.3     HP-UX PA-RISC (64-bit) (American English)     General     Oracle Fusion Middleware Family     Apr 4, 2008     1.9 GB
5983622     PLACEHOLDER BUG FOR AS/DS 10.1.2.3 PATCHSET RELEASE     10.1.2.3     HP-UX Itanium (American English)     General     Oracle Fusion Middleware Family     Apr 4, 2008     1.6 GB
5983622     PLACEHOLDER BUG FOR AS/DS 10.1.2.3 PATCHSET RELEASE     10.1.2.3     Oracle Solaris on SPARC (64-bit) (American English)     General     Oracle Fusion Middleware Family     Mar 8, 2008     1.7 GB
5983622     PLACEHOLDER BUG FOR AS/DS 10.1.2.3 PATCHSET RELEASE     10.1.2.3     Microsoft Windows (32-bit) (American English)     General     Oracle Fusion Middleware Family     Mar 8, 2008     1.6 GB
None of these say windows -7 patch. Its only for windows 32 bit.

Error while installing Oracle Apps R12 , on windows server 2003 R2

Hi Experts
While installing Oracle Apps R12 , on windows server 2003 R2, I am getting the following error.
System Utilities
command: cmd.exe /c E:\oracle 12i dump\startCD\Disk1\rapidwiz\bin\adchkutl.cmd F:\cygwin\bin F:\VC\bin
'E:\oracle' is not recognized as an internal or external command,
operable program or batch file.
RW-50011: Error: - System Utilities Availability test has returned an error: 1
======================================================================================================================================================================================================================================================================
File Space Check :
-- database node space checks --
RW-20012: Error: - Free disk space on system returns zero:
     probable cause - mount point does not exist.
RW-20013: Error: - Not enough free disk space on system:
Database ORACLE_HOME = F:\oracle\VIS\db\tech_st\11.1.0
required = 5600.0
actual = 0.0
RW-20012: Error: - Free disk space on system returns zero:
     probable cause - mount point does not exist.
RW-20013: Error: - Not enough free disk space on system:
Database System File Directory = F:\oracle\VIS\db\apps_st\data
required = 20200.0
actual = 0.0
RW-20012: Error: - Free disk space on system returns zero:
     probable cause - mount point does not exist.
RW-20013: Error: - Not enough free disk space on system:
Database Log File Directory = F:\oracle\VIS\db\apps_st\data
required = 950.0
actual = 0.0
RW-20012: Error: - Free disk space on system returns zero:
     probable cause - mount point does not exist.
RW-20013: Error: - Not enough free disk space on system:
Database Transaction File Directory = F:\oracle\VIS\db\apps_st\data
required = 103350.0
actual = 0.0
RW-20012: Error: - Free disk space on system returns zero:
     probable cause - mount point does not exist.
RW-20013: Error: - Not enough free disk space on system:
Database Archive File Directory = F:\oracle\VIS\db\apps_st\data
required = 64500.0
actual = 0.0
-- apps node space checks --
RW-20012: Error: - Free disk space on system returns zero:
     probable cause - mount point does not exist.
RW-20013: Error: - Not enough free disk space on system:
APPL_TOP = E:\apps\VIS\apps\apps_st\appl
required = 5800.0
actual = 0.0
RW-20012: Error: - Free disk space on system returns zero:
     probable cause - mount point does not exist.
RW-20013: Error: - Not enough free disk space on system:
APPL_TOP mount 2 = E:\apps\VIS\apps\apps_st\appl
required = 2800.0
actual = 0.0
RW-20012: Error: - Free disk space on system returns zero:
     probable cause - mount point does not exist.
RW-20013: Error: - Not enough free disk space on system:
APPL_TOP mount 3 = E:\apps\VIS\apps\apps_st\appl
required = 8400.0
actual = 0.0
RW-20012: Error: - Free disk space on system returns zero:
     probable cause - mount point does not exist.
RW-20013: Error: - Not enough free disk space on system:
APPL_TOP mount 4 = E:\apps\VIS\apps\apps_st\appl
required = 3100.0
actual = 0.0
RW-20012: Error: - Free disk space on system returns zero:
     probable cause - mount point does not exist.
RW-20013: Error: - Not enough free disk space on system:
COMMON_TOP = E:\apps\VIS\apps\apps_st\comn
required = 3200.0
actual = 0.0
RW-20012: Error: - Free disk space on system returns zero:
     probable cause - mount point does not exist.
RW-20013: Error: - Not enough free disk space on system:
Apps ORACLE_HOME = E:\apps\VIS\apps\tech_st\10.1.3
required = 1400.0
actual = 0.0
RW-20012: Error: - Free disk space on system returns zero:
     probable cause - mount point does not exist.
RW-20013: Error: - Not enough free disk space on system:
Tools ORACLE_HOME = E:\apps\VIS\apps\tech_st\10.1.2
required = 1400.0
actual = 0.0
RW-20012: Error: - Free disk space on system returns zero:
     probable cause - mount point does not exist.
RW-20013: Error: - Not enough free disk space on system:
Temp Directory = E:\apps\VIS\inst\apps\VIS_stccspr01\temp
required = 1024.0
actual = 0.0
waiting for expert suggestion.
Thanks
Rahul Srivastava

Hi Hussein
after changing the directory name as Stage12, I am getting error
File Space Check :
-- database node space checks --
Disk space on system acceptable:
Database ORACLE_HOME = F:\oracle\VIS\db\tech_st\11.1.0
required = 5600.0
actual = 200473.43359375
Disk space on system acceptable:
Database System File Directory = F:\oracle\VIS\db\apps_st\data
required = 20200.0
actual = 194873.43359375
Disk space on system acceptable:
Database Log File Directory = F:\oracle\VIS\db\apps_st\data
required = 950.0
actual = 174673.43359375
Disk space on system acceptable:
Database Transaction File Directory = F:\oracle\VIS\db\apps_st\data
required = 103350.0
actual = 173723.43359375
Disk space on system acceptable:
Database Archive File Directory = F:\oracle\VIS\db\apps_st\data
required = 64500.0
actual = 70373.43359375
-- apps node space checks --
Disk space on system acceptable:
APPL_TOP = F:\oracle\VIS\apps\apps_st\appl
required = 5800.0
actual = 5873.43359375
RW-20013: Error: - Not enough free disk space on system:
APPL_TOP mount 2 = F:\oracle\VIS\apps\apps_st\appl
required = 2800.0
actual = 73.43359375
RW-20013: Error: - Not enough free disk space on system:
APPL_TOP mount 3 = F:\oracle\VIS\apps\apps_st\appl
required = 8400.0
actual = 73.43359375
RW-20013: Error: - Not enough free disk space on system:
APPL_TOP mount 4 = F:\oracle\VIS\apps\apps_st\appl
required = 3100.0
actual = 73.43359375
RW-20013: Error: - Not enough free disk space on system:
COMMON_TOP = F:\oracle\VIS\apps\apps_st\comn
required = 3200.0
actual = 73.43359375
RW-20013: Error: - Not enough free disk space on system:
Apps ORACLE_HOME = F:\oracle\VIS\apps\tech_st\10.1.3
required = 1400.0
actual = 73.43359375
RW-20013: Error: - Not enough free disk space on system:
Tools ORACLE_HOME = F:\oracle\VIS\apps\tech_st\10.1.2
required = 1400.0
actual = 73.43359375
RW-20013: Error: - Not enough free disk space on system:
Temp Directory = F:\oracle\VIS\inst\apps\VIS_stccspr01\temp
required = 1024.0
actual = 73.43359375
also for
System Utilities
command: cmd.exe /c E:\Stage12\startCD\Disk1\rapidwiz\bin\adchkutl.cmd F:\cygwin\bin F:\VC\bin
E:\Stage12\startCD\Disk1\rapidwiz>echo off
/cygdrive/c/WINDOWS/system32/cmd
'which' command is available.
/usr/bin/gnumake
'gnumake' is available.
'cl' is not available.
ERRORCODE = 1 ERRORCODE_ENDThe system cannot find the path specified.
which: no cl in (/usr/bin:/cygdrive/c/WINDOWS:/cygdrive/c/WINDOWS/system32)
RW-50011: Error: - System Utilities Availability test has returned an error: 1
Yes I do have sufficient space i.e . for E: 106 GB and F: 195 GB free space .
Thanks
Rahul Srivastava

Install Premiere pro cs4 on windows server 2008

Hi ,
How can i Install Premiere pro cs4 on windows server 2008?

I don't think you can... as far as I know, PPro is not designed to run on a server

Installing SUP 2.0 in Windows Server 2008

Hello Experts,
   I am going to install SUP 2.0 in windows server 2008. so please suggest me how to install it and which components must be install in Server and in Client machine.
How to connect client machine with the Server 2008 for Sybase.
I followed SUP Installation Guide. But can't get any proper information,
Please reply me.
Regards,
Tapan

Hi Tapan,
You have two options to install SUP 2.0.
1. Cluster installation
     a. Data tier node
     b. Server nodes
2. Single node installation
For Single node installation, all Data Tier and UnwiredPlatform components will be installed on single system. For this you need to launch the installer and proceed with default installation options (you can change ports, etc).
For Cluster installation, on one machine launch the installer and select cluster option and select "installation Data tier node for my cluster" and install it. After this share the Data folder (Under the install directory) to the user who is going to install Server nodes. For Server nodes, launch the installer on diffrent machine and select cluster option and select "installing first server node for my cluster" and enter needed information.
Hope this helps.
Regards,
Abhishek Joshi

Cant install Oracle 9i x64 on Windows server 2003 64bit

Hi,
im new here and i got a problem
i cant install Oracle 9i x64 on Windows server 2003 64bit
i get error:
Setup.exe ist valid, but is for a machine type other than the current machine
can someone help?

Does this server use Itanium processors ? See MOS Doc 430677.1 (The image file setup.exe is valid, but is for a machine type other than the current machine.)
Srini

How to install oracle 10g in windows server 2008

I want to install oracle 10 (10.2.0.4.0) in windows server 2008 R2 X64 bit version.
Previously i have test this successfully. But not it's giving an error during the installation
Enterprise manager configuratio failed due to the following error-
Error starting Database Control
Refer the log file at (path).....\emConfig.log for more details.
You can retery configuring this database wlth Enterprise Manager later by manually running (path).....\bin\emca script.
I tried to start the service manually from services. But it didn't work.
I tried to run that script using command prompt. but nothing happened.
in my start menu under oracle home db-console link also not there.
here is my log file
Feb 7, 2011 11:54:08 AM oracle.sysman.emcp.util.PlatformInterface executeCommand
CONFIG: Enter Enterprise Manager Root Password :
************Certificate was added to keystore
Certificate reply was installed in keystore
Feb 7, 2011 11:54:08 AM oracle.sysman.emcp.util.FileUtil printFileToLog
CONFIG: Printing file(After Secure DBConsole): D:\oracle\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole_AX-2009_AX2009\config\http-web-site.xml
<?xml version = '1.0' standalone = 'yes'?>
<!DOCTYPE web-site PUBLIC "OracleAS XML Web-site" "http://xmlns.oracle.com/ias/dtds/web-site-9_04.dtd">
<web-site port="1158" display-name="OC4J Java HTTP Web Site" secure="TRUE">
     
     <default-web-app application="default" name="defaultWebApp"/>
     <web-app application="default" name="dms0" root="/dms0"/>
     <web-app application="default" name="dms" root="/dmsoc4j"/>
     <web-app application="em" name="em" load-on-startup="true" root="/em" shared="true" />
     
     <access-log path="../log/http-web-access.log"/>
     
     <ssl-config needs-client-auth="false" keystore="D:\oracle\product\10.2.0\db_1/oc4j/j2ee/OC4J_DBConsole_AX-2009_AX2009/config/server/keystore.test" keystore-password="BC062AD3D852A5B5D02E979B69DD12B3" />
</web-site>
Feb 7, 2011 11:54:08 AM oracle.sysman.emcp.util.DBControlUtil secureDBConsole
INFO: Database Control secured successfully.
Feb 7, 2011 11:54:08 AM oracle.sysman.emcp.EMDBPostConfig performConfiguration
CONFIG: Securing Database Control completed successfully .
Feb 7, 2011 11:54:08 AM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Feb 7, 2011 11:54:08 AM oracle.sysman.emcp.util.DBControlUtil startOMS
INFO: Starting Database Control (this may take a while) ...
Feb 7, 2011 11:54:08 AM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: cmdType: 0
Feb 7, 2011 11:54:08 AM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Starting Windows service...OracleDBConsoleAX2009
Feb 7, 2011 11:54:08 AM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleAX2009' to fully start
Feb 7, 2011 11:54:18 AM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleAX2009' to fully start
Feb 7, 2011 11:54:28 AM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleAX2009' to fully start
Feb 7, 2011 11:54:38 AM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleAX2009' to fully start
Feb 7, 2011 11:54:48 AM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleAX2009' to fully start
Feb 7, 2011 11:54:58 AM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleAX2009' to fully start
Feb 7, 2011 11:55:08 AM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleAX2009' to fully start
Feb 7, 2011 11:55:18 AM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleAX2009' to fully start
Feb 7, 2011 11:55:28 AM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleAX2009' to fully start
Feb 7, 2011 11:55:38 AM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleAX2009' to fully start
Feb 7, 2011 11:55:48 AM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleAX2009' to fully start
Feb 7, 2011 11:55:48 AM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Initialization failure for service during start
Feb 7, 2011 11:55:48 AM oracle.sysman.emcp.EMConfig perform
SEVERE: Error starting Database Control
Refer to the log file at D:\oracle\product\10.2.0\db_1\cfgtoollogs\dbca\AX2009\emConfig.log for more details.
Feb 7, 2011 11:55:48 AM oracle.sysman.emcp.EMConfig perform
CONFIG: Stack Trace:
oracle.sysman.emcp.exception.EMConfigException: Error starting Database Control
     at oracle.sysman.emcp.EMDBPostConfig.performConfiguration(EMDBPostConfig.java:646)
     at oracle.sysman.emcp.EMDBPostConfig.invoke(EMDBPostConfig.java:224)
     at oracle.sysman.emcp.EMDBPostConfig.invoke(EMDBPostConfig.java:193)
     at oracle.sysman.emcp.EMConfig.perform(EMConfig.java:184)
     at oracle.sysman.assistants.util.em.EMConfiguration.run(EMConfiguration.java:436)
     at java.lang.Thread.run(Thread.java:595)
please if any one can give me any solution to run my database console. i don't know any method. i'm new to the oracle.
Thank you

I have checked that. but i also say that oracle 10g (10.2.0.4 ) support for windows server 2008 r2 X64.
Windows Server 2008 x64
Oracle Database 10g Release 2 (10.2.0.4 or later) for Windows x64 is certified on Windows Server 2008 x64 (all editions). 32-bit Oracle Database Client (10.2.0.4) and higher versions are supported on Windows Server 2008 x64.
I don'y think it's problem of os version or oracle version. Because when we purchase we asked from them what is the recommended version for our os. they told that 10g 10.2.0.4 is ok. previously i have installed this successfully. But now i can't.
however thanks for tried to help me. if u can find out any other reason\s please late me know..
thank you very much.

Oracle 10g on Windows Server 2008

Hi dears;
OS:     Windows Server 2008 R2 Standard (SP1) 64-bit
Processor:     Intel(R) Xeon(R) CPU E5645 @2.40GHz
RAM:     8GB
Oracle:      Oracle 10g EE R2 (10.2.0.1.0) 32-bit
As soon as the installation is OUI reports an error message and quits.
Message: Abnormal program termination. An internal error occured. Send following files to oracle support.
"Unknown"
"Unknown"
"Unknown"
Please help.

if you search on this forum you will find similar thread talking about this , so please search first before posting new thread
Oracle Database 10.2.0.1.0 is not certified on Microsoft Windows x64 (64-bit) 2008
Oracle Database 10.2.0.1.0 is not certified on Microsoft Windows x64 (64-bit) 2008 R2
Only :
Oracle Database 10.2.0.4.0 is certified on Microsoft Windows x64 (64-bit) 2008
Oracle Database 10.2.0.5.0 2008 , 2008 R2

Installing forms 11gr2 services on windows server 2008 r2 64 bit

hello,
I successfully installed on windows 7 64 bit my developer forms & reports 11gR2 with weblogic 10.3.5 , jdk 1.6.0_+.
Now i want to install in it in windows server 2008 R2 64bit, to deploy the application i created as a test.
Question.
1. Can I used the same installation set up , step, procedure as the development mode by only changing the installation mode to production mode in windows 2008R2?
1.1 Do I need to create domain first after install the weblogic or it is like the development mode that the FRM_installation will create its classic domain?
2. Can I used it without the fusion middleware?
3. It is compatible version for forms 11gr2 for Oracle Fusion Middleware 11g Release 1 (11.1.1.6.0) ? << doubted not compatible.
4. It is valid if i only install weblogic server 10.3.5 without the fusion middleware? Am I or other clients can able to access it?
5. It is will be a AS server even if without the repository creation?
Note : i only need the forms&report server services to run our application on windows server 2008 R2 64 bit and compile respectedly.
I ve done it with OAS 10g before but different procedures now since forms 11gr2 is using now weblogic server.
Thank you very much.

... i want to install in it ... , to deploy the application i created as a test If you chose the "Development" install option during the installation of 11.1.2 you would have everything you needed to run your form. The only significant difference between the Dev and Deploy installation is the that in the Dev install type the Forms and Reports Servlets are deployed into the Admin server Managed server rather than creating a unique one for each. For local testing purposes, this should be sufficient for most cases. If on the other hand you need a full installation (Deployment), I would recommend that you choose this option, but be sure to also include the Builders. The Builders are available for both install types. I would not recommend attempting to have both install types installed together although it likely can be done. Having both installed would likely create confusion and difficulty during troubleshooting.
Important point. If you choose the Deployment option and include the Builders during that installation, you do not need to start everything in order to run a form. All that is needed is WLS_FORMS. All other processes can be stopped if system resources is a concern. For an actual production deployment, it is recommended that you route end-user requests through HTTP Server, but this is not required unless you plan to use SSO or other feature that is managed through HTTP Server.

Issue with Oracle MTS installation in windows server 2008

Hi Team,
Yesterday, I have installaed oracle client version 11.1.0.7, selected microsoft transaction server option and installed it in my middle tier server.
Start->program->Oracle home11g-> (Searched for oracle mts, its not available) It seems oracle client version needs ODAC to be installed (Is it correct? )
I have downloaded from oracle site. But, its throwing an error like the file is not in proper format.
1 Any special settings needs to be done for installing the MTS in windows server 2008?
2. I need to create a service in MTS to point to my database server?
3. Please share me some relative links on the same.
4. I can see MTS recovery services is running in my machine.
5. Previously, I have installed Oracle 10G client and removed it and am trying with oracle 11g. Just I have uninstalled the application and I didnt do anything. Do we need to remove anything in the registry.
This issue is very critical for me. Please share your thoughts.
Thanks and Regards,
Venkatesan Prabu .J

I have the same situation. Could you please share your experience if you resolve it? Thanks.

Installing Oracle XE 10g on Window server 2008

Similar Messages

Maybe you are looking for