Installing oracle10g on two servers with same databae

Dear DBAs
I have two servers and one SCSI SATA box as storage device which i have configured in RAID5 format. Servers are connected to channel 0 and 1 of the SATA box respectively.My OS is RHEL ES-4
I want to install Oracle10g on these two machines with SATA box as the Databse Storage medium. I donot want to use RAC as my clients donot have DBA. The servers has to be configured in a failsafe method.

hi gert
the SATA SCSI box is LSI Logic Megaraid sas 8408E. My aim is to have a backup server which needs to be switched on once the main server fails. I can afford for a little bit data loss. Only thing is the backup server should use the data files of the crashed server.

Similar Messages

  • Monitoring two servers with same IIS configuration using SCOM

    Hello,
    We have two servers which has the same IIS configuration including sites names, how do we configure APM to monitor and get events captured on two different monitors on SCOM 2012 R2.
    Thank you, Anand
    Anand Franklin

    Hi Anand,
    There is no problem at all, if applications IIS paths (Web Site names + Web application name in IIS) absolutely match. Make sure both servers have SCOM Agent installed and connected to the same Management Group.
    In .NET Application Performance Monitoring template just keep Target Group field blank (it's blank by default) - that will mean the application will be monitored on each server within Management Group where it's discovered. The same configuration of
    APM monitoring will be used for all app instances.
    If you want to monitor the app only on two servers, and at the same time the app is hosted on more than these two boxes, you can create Windows Computer group populated with appropriate servers and specify this group as Target for APM monitoring.
    If you want to differentiate APM configuration for specific app instances, you should create several Windows Computer groups and bind each group with separate configuration - in this case you will have to run .NET Application Monitoring template several
    times, picking up the same app, but changing APM settings and setting new Target Group.
    Igor Savchenko, VIAcode Consulting LLC (http://www.viacode.com/)

  • What issues we may face in installing a new Prod portal with same SID as existing one

    Hello All -
    We found some vbs script files in the host of EP Prod system. On confirmation from SAP we deleted those files without any harm to our prod EP system. But customer is still concerned about the security of the system and wanted us build the new EP prod system with same SID.
    We approached SAP and they suggested to install a new EP system and do customization rather than performing system copy from existing prod EP system because that may still bring those security threat changes to new EP prod system. (we ll decommission the old EP if everything works fine in new EP)
    Now I would like to list all the issues we may face in building a new EP system with same SID as that of already existing one and then doing entire customization again in new EP from Basis team point of view. The following are very few i could think of. Could you please add some other concerns you could think of.
    1) Keeping in mind that this EP system is in use for more than 6 years, some of the customization could have been done on lower versions. So could those changes be again exported from Dev and imported into new version of EP we are building now ?
    2) Can't add two hosts with same name in DNS Server
    3) Can't add two systems with same SID in Solution Manager for calculation of SPS to upgrade new EP

    You would have to run ipsinstall and install the new gateway. Make sure to follow the installation instruction for installing a gateway.
    After you install the gateway you follow the steps in the link you posted to let the server know there is a new gateway.
    Then make sure to restart the gateway and server.
    HTH ..

  • Two methods with same name but different return type?

    Can I have two methods with same name but different return type in Java? I used to do this in C++ (method overloading or function overloading)
    Here is my code:
    import java.io.*;
    public class Test{
    public static void main(String ar[]){
    try{          
    //I give an invalid file name to throw IO error.
    File file = new File("c:/invalid file name becasue of spaces");
    FileWriter writer = new FileWriter(file ,true);
    writer.write("Test");
    writer.close();     
    } catch (IOException IOe){
         System.out.println("Failure");
    //call first method - displays stack trace on screen
         showerr(NPe);
    //call second method - returns stack trace as string
            String msg = showerr(NPe);
            System.out.println(msg);
    } // end of main
    public static void showerr(Exception e){
         StringWriter sw = new StringWriter();
         PrintWriter pw = new PrintWriter(sw);
         e.printStackTrace(pw);
         try{
         pw.close();
         sw.close();
         catch (IOException IOe){
         IOe.printStackTrace();     
         String stackTrace = sw.toString();
         System.out.println("Null Ptr\n" +  stackTrace );
    }//end of first showerr
    public static String showerr(Exception e){
         StringWriter sw = new StringWriter();
         PrintWriter pw = new PrintWriter(sw);
         e.printStackTrace(pw);
         try{
         pw.close();
         sw.close();
         catch (IOException IOe){
         IOe.printStackTrace();     
         return sw.toString();
    }//end of second showerr
    } // end of class
    [\code]

    Overloading is when you have multiple methods that have the same name and the same return type but take different parameters. See example
    public class Overloader {
         public String buildError(Exception e){
              java.util.Date now = new java.util.Date() ;
              java.text.DateFormat format = java.text.DateFormat.getInstance() ;
              StringBuffer buffer = new StringBuffer() ;
              buffer.append(format.format(now))
                   .append( " : " )
                   .append( e.getClass().getName() )
                   .append( " : " )
                   .append( e.getMessage() ) ;
              return buffer.toString() ;
         public String buildError(String msg){
              java.util.Date now = new java.util.Date() ;
              java.text.DateFormat format = java.text.DateFormat.getInstance() ;
              StringBuffer buffer = new StringBuffer() ;
              buffer.append(format.format(now))
                   .append( " : " )
                   .append( msg ) ;
              return buffer.toString() ;
         public String buildErrors(int errCount){
              java.util.Date now = new java.util.Date() ;
              java.text.DateFormat format = java.text.DateFormat.getInstance() ;
              StringBuffer buffer = new StringBuffer() ;
              buffer.append(format.format(now))
                   .append( " : " )
                   .append( "There have been " )
                   .append( errCount )
                   .append( " errors encountered.")  ;
              return buffer.toString() ;
    }Make sense ???
    Regards,

  • Two Switches with same MAC+Priority running STP

    Hi
    what will happen if two switch with same MAC-ADDRESS and same STP priority will run STP , how will elect to the root bridge ???? how the STP process will handle this situation?
    thanx

    Well, first off, no two switches (or switchports) will have the same MAC (if they do, you're buying switches from the wrong, very bad place).
    Every port of the switch will have (at least) one MAC of it's own.
    Given the same priority for all switches/bridges on the LAN, the lowest switch/bridge MAC on the LAN will win as the root.
    VLANS take on the MAC of the administrative interface ("CPU"): i.e., xxxx.xxxx.5000, the first port (i.e., fa0/1) is xxxx.xxxx.5001, the second (fa0/2) is xxx.xxxx.5002, and so on
    If you do a "show interface", the MAC / bia is displayed in the second line.
    Good Luck
    Scott

  • Two idocs with same idoc number in idx5

    We are using an idoc to file scenario where idocs are bundled using bpm and posted to ftp. here the issue is we are getting two idocs with same idoc number in idx5. due to which the file in ftp is getting overwritten.
    Could anyone suggest me what to do in this regard.

    Hi,
    >>>check your sender system is sending same IDoc twice ?
    if you send the same IDOC twice they both get different numbers as IDOC number is taken from the IDOC num range
    unless you're able to send the same IDOC twice with the same IDOC num somehow
    Regards,
    Michal Krawczyk

  • Two account with same UPN in Active Directory

    Is it possible to have two accounts with same UPN in AD? 
    I'm using Windows Server 2012 R2

    To expand on what Mr X said. Active Directory allows you to assign just about anything to the userPrincipalName attribute, as long as the value is unique. The value of this attribute is generally referred to as the UPN. But you could assign values with no
    "@" symbol, for example, or more than one "@" symbol. Also, Active Directory does not require that any value be assigned. It is an optional attribute.
    If no value is assigned to the userPrincipalName attribute, then the user can use a "default" UPN, which is <sAMAccountName>@<DNS domain name>, where <sAMAccountName> is the "pre-Windows 2000 logon" name of the user
    (the value of the sAMAccountName attribute), and <DNS domain name> is the DNS name of the domain.
    If a user has a value assigned to userPrincipalName that does not match this "default" form, then they can logon with either UPN, as long as no one else has either value assigned to their userPrincipalName attribute. You will note that Active
    Directory enforces uniqueness in the domain on sAMAccountName values.
    If in domain "domain.com" a user has a sAMAccountName of "jsmith" but userPrincipalName "[email protected]", then another user can have userPrincipalName of "[email protected]" (as long as no one else
    has that value assigned to userPrincipalName). They can each logon with their assigned values for userPrincipalName. But the first user can no longer also logon with their "default" value, based on their sAMAccountName, because it is now
    used by someone else. But if you attempt to assign a value to userPrincipalName that is also assigned to another user, you get an error.
    Bottom line, only one person can logon with any given UPN.
    Richard Mueller - MVP Directory Services

  • Two servers with redundant connections for Sun StorEdge 3320 SCSI arrays

    Hello All,
    I read in the "Sun StorEdge 3000 Family Installation, Operation and Service Manual" that it's possible to setup "two servers with redundant connections" but I never see a detailed schema to do this. I read also the "Best Pratices Guide" but this case is not mentioned. Is it really possible ?
    My objective is to split a Sun StoreEdge 3320 SCSI array between two hosts with dual redundant scsi connection.
    Thanks in advance for your answers.
    Francois.

    At first this sounded easy, but looking at the parts listing for the 3320 seems to indicate otherwise. They're listing different part numbers for the chassis and midplane...
    371-0105 chassis & midplane for JBOD
    371-0106 chassis & midplane for RAID array
    There are also different part numbers for the I/O boards....
    370-7655 RAID SCSI I/O module
    370-7713 JBOD SCSI I/O module
    I can see what the difference is between the I/O modules, but am unsure of what differences if any are in the chassis and midplane. Seems like there's more involved here than what it would be worth to try and make it work. Perhaps the cost of a second HBA would be the lesser of two evils..........

  • Two records with same  key (Infocube)

    Hi,
    I was trying to do, in a update rule, an "IF" condition with two key figures.
    IF Kf1 > Kf2. result = Kf1 else result = Kf2.
    But the data in the source (datamart Infocube to infocube) have tow records with the same characteristics combination (the same keys)and different amount in the keyfigures, then the result of my "if" condition is not the expected because I understood in the infocube only exists one characteristics combination. :S
    I was seeing those records in the manage transaction of the infocube.
    Some reason for this?
    Thanks and regards
    Victoria Leó

    This can happen with parallel loads.  Two rows with same set of Char values but in different packets of the same Request, being loaded at the same time.
    It really shouldn't be an issue - your update rule will make the KF change as desired.  Your queries aggregate KFs based characteristic values, not Dim IDs, so you'll get the totals you expect.
    Here's some more info:
    There is an RSRV Test that lets you check a dimension for a cube to see if multiple DIM IDs exist for the same combination of Chars - <b>Multiple Entries in Dimensions of a (Basis) InfoCube</b>
    Output looks like:
    12:02:24 o'clock on 08/25/2006: Start test run for user PIZZAMAN:)
    Dimension ZFM_C521: DIMID 61,215 and 61,214 have same characteristic values
    Dimension ZFM_C521: DIMID 61,880 and 61,879 have same characteristic values
    Dimension ZFM_C521: DIMID 61,366 and 61,365 have same characteristic values
    Dimension ZFM_C521: DIMID 61,368 and 61,367 have same characteristic values
    12:02:24 on 08/25/2006: Test run for user PIZZAMAN:) completed
    You can run the Correct Error option to have it update fact rows to use one of the DimIDs if you want, but unless you have lots of them, I even wouldn't bother.
    Here's the description of the test:
    <u>Description</u>
    This elementary test recognizes whether there are several lines that have different DIMIDs(dimension table key), but have the same SIDs for the selected dimension table for the InfoCube specified. (This can occur by using parallel loading jobs). This has nothing to do with an inconsistency. However, unnecessary storage space is occupied in the database.
    <u>Repairs</u>
    Since the different DIMIDs with the same SIDs are normally used in the fact tables, they cannot simply be deleted. Therefore, all of the different DIMIDS in the fact tables are replaced by one DIMID that is randomly selected from the equivalent ones. Before a change can be made to the database, the consent of the user is requested.
    DIMIDs that have become unnecessary are deleted in the connection. In doing so, not only are the DIMDs deleted that were released in the first part of the repair, but so are all of those that are no longer used in the fact tables (including aggregates). The consent of the user is again requested before this change is made.

  • Struts- two actions with same path in struts config

    hai
    I am having html:select tag with two options (View And Download) in a form.My form signature is like <html:form action="select">.I mapped two options(View,Download) with same action path.When i click view it doesn't forwards(remains idle) and no error is shown.But i click download it forwards to the appropriate page.If iam having two tags with same action path the second is only working.This problem doesn't comes when iam having one tag alone.
    My code is here:
    -----------Select.jsp----------------
    <html:form action="Select">
    <html:select property="id">
    <html:option value="view">View</html:option>
    <html:option value="download">Download</html:option>
    </html:select>
    </html:form>
    ----------------Struts-config.xml------------
    <form-beans>
    <form-bean name="viewForm" type="ViewForm"/>
    <form-bean name="download" type="DownloadForm"/>
    </form-beans>
    <action-mappings>
    <action path="/Select"
    name="viewForm"
    type="ViewAction"
    input="/Select.jsp">
    <forward name="success" path="/Success.jsp"/>
    </action>
    <action path="/Select"
    name="downloadForm"
    type="DownloadAction"
    input="/Select.jsp">
    <forward name="success" path="/Welcome.jsp"/>
    </action>
    </action-mappings>
    Can i have action tag with same paths like this.If not please provide me a solution

    I have created two success pages.
    I have created two findForward in my ActionClasspublic ActionForward execute(ActionMapping mapping,...............)
    if(a==view)
    return mapping.findForward("success");
    else
    return mapping.findForward("success1");
    ----------------Struts-config.xml------------
    <form-beans>
    <form-bean name="viewdownloadForm" type="ViewdownloadForm"/>
    </form-beans>
    <action-mappings>
    <action path="/Select"
    name="viewdownloadForm"
    type="ViewdownloadAction"
    input="/Select.jsp">
    <forward name="success" path="/Success.jsp"/>
    <forward name="success1" path="/Success1.jsp"/>
    </action>

  • Unable to monitor two databases with same name on two different hosts

    I have got two databases with same name on two different hosts. I added one database to the list of monitored databases. Now If I try to add the other one , I get the message that the database is already being managed.
    Can't we monitor two databases with same name on two different hosts?

    you can... while saving the target,give a different name.. for eg target-2

  • How to separate two contact with same name

    Hi, anyone knows how to separate two contacts with same name in Contacts?  Actually they are two persons from two gmail contacts with same name but different contact numbers, different emails....etc, but Contacts assume they are same person and merge them as one!

    FG,
    In Lion, you have the File > Duplicate option. You will then have two copies of your document open, and the one on top will have the temporary filename "OriginalFileName copy", and your next responsibility is to File > Save (or Command-S) and rename the duplicate. At this point, you edit the copy's name, to perhaps ...copy 1, or whatever you wish. The document you had open when you initiated the File > Duplicate will still be there on your screen, waiting for you to Close it or continue editing.
    Jerry

  • HT5622 Good day!! I was having two Iphones with same icloud id, later i deleted 1 id from one device, and made 2nd id for this device but same time my old id is stored on other device and i can not change it with another id, can any1 guide me on this issu

    Good day!! I was having two Iphones with same icloud id, later i deleted 1 id from one device, and made 2nd id for this device but same time my old id is stored on other device and i can not change it with another id, can any1 guide me on this issue.

    Log in to icloud.com on a web browser and remove the device from "Find My iPhone"

  • Is it OK to have two SBS Servers with same name, on different subnets but connected over a VPN?

    Hi Everyone,
                       I'm just about to connect up two SBS 2011 Servers with the same server name but on different subnets & domains over a VPN.
    So for example both servers will have the name Server01, one would have an ip address of 192.168.85.5, the other 192.168.86.5, they both then would be connected over a VPN.
    Can anyone foresee any issues with this configuration, like DNS & DHCP requests, adding new machines to the domain, mapping drives etc.
    Many thanks,
    Nick

    Hi Larry & Strike First,
                      Thank you for your responses. I understand that this is an unusual situation. Basically I've recently taken over the IT support for this client. The client has just had a new phone system installed
    & are asking if they can speak to each office internally, which can easily be done once I setup the VPN.
    However I noticed whilst looking at this further that the Server names are the same, hence my question?
    Am I right in saying that providing the workstations  have a trust relationship with their own domain controllers through their individual domains on separate subnets, that hopefully there shouldn't be any DNS issues between the two domains and Servers?
    I could build a new VM if you feel it would be better practice to do so?
    Many thanks for your assistance,
    Nick

  • How to set up NAT for two servers using same port with ASDM ASA 5505

    Hi there,
    We have a new installation of a ASA 5505 and are trying to get some NAT issues straightened out. Here is the scenario: On our internal network, we have two servers running Filemaker Server, a relational database server that clients connect with using port 5003. Our goal is to be able to allow users from the outside to access either of these servers as needed. I know how to set up a simple static NAT rule and matching Access rule in ASDM which would be fine for a case in which only one server using a given port is running on a network, but for simple static rules I seem to be blocked from entering a different translated port number from the orginal port number, which becomes a problem when two servers we need to access from the outside are running software using the same port number.
    What is the simplest way to address this need? I am guessing that I need to set up a scenario like this, where port 5004 (or any arbitrarily choosen unused port, can be used to access the second server:
    Outside user enters   FQDN:5004  and this translates to Database server # 1 as   192.168.1.40:5003
    and
    Outside user enters   FQDN:5003  and this translates to Database server # 1 as   192.168.1.38:5003
    If so, what is the easist way to get this done? Or is there a better what to handle this scenario?
    Thanks in advance,
    James

    I would create two objects and use object NAT
    object network Obj_5004
    host 192.168.1.40
    object network Obj_5004
    nat (inside,outside) static service tcp 5003 5004
    object network Obj_5003
    host 192.168.1.38
    object network Obj_5003
    nat (inside,outside) static service tcp 5003 5003
    Of course you will need to open your outside interface for tcp ports 5003 and 5004 to make this happen

Maybe you are looking for