Installing Oracle8i on Laptop with pentium 4 and windows XP pro

Please Help!
I could not install the oracle 8i on my laptop its Dell pentium 4 and Windows XP prof. I Run the application and then it exits silently no error message, no thing in the log file about the application.
Thanks

This question gets asked a lot. Do a search on this forum for the answer.

Similar Messages

  • I had 3 versions of FF and had to redo the HD and now no version will install says "Can't open output file" i have winddows 7 64 bit 8 GB memory and 1T HD but i have it on my other desktop and laptop with less memory and HD space and works fine

    I had 3 versions of FF and had to redo the HD and now no version will install says "Can't open output file" i have winddows 7 64 bit 8 GB memory and 1T HD but i have it on my other desktop and laptop with less memory and HD space and works fine laptop has windows 7 64 bit and other desktop hook to my 32" tv has win 7 32-bit i lso did clean removal of all versions of FF and did new DLs with screen shots of it DLing, complete of DL and after i got the error again.

    i am posting this as a reply due to it would not allow me to attach screen shots except for this way

  • I am trying to switch laptops with my mom, and successfully wiped mine and restored it, but now her password won't allow her into my computer, even though it says it's her account. Is there any way to bypass the password screen?

    I am trying to switch laptops with my mom, and successfully wiped mine and restored it, but now the password that she used on her computer isn't working on this computer. Is there any logical reason why the two passwords would be different, if I restored her information from a Time Machine backup? Aditionally, Is there a way to bypass the password page on startup to make a password that my mom knows?

    If Disk Warrior does not work you can try the following steps (but they may not work if the disk has a hardware error).
    Get the disk (DVD or CD) that came with the system (since you have it listed as 10.6.8).  If it is 10.7 or 10.8 use the Recovery partition to boot from or the USB installer if you have that option.
    Insert the disk then power down
    HOLDING the C key, power up to boot from the disc.
    Get to Disk Utility
    If Disk Utility will now show your hard drive, use DU to REPAIR the disk.
    When it completes the Repair process successfully as indicated in DU, do a shut down.  If Repair is not successful then an different course of action is indicated below.
    Then HOLDING THE APPLE (or Command key depending on your keyboard) KEY AND THE OPTION KEY AND THE LETTER P AND R KEYS, continue hiolding them until you hear the chime tone for the THIRD time then release all four keys.
    If REPAIR is not successful, use the Install disc as a boot and REINSTALL THE OS X OPERATING SYSTEM  DO NOT ERASE THE DISK OR VOLUME FIRST.  REPEAT DO NOT erase the disk or volume before trying to reinstall the OS X operating system.  After re-installing the OS do a software update.  Note that ERASING the disk is NOT required to do an OS re-install.  This allows your existing data and application files to remain.
    If that fails then you are down to the "bitter end" of erasing the volume and reinstalling the OS and then all the other software.
    If erasing the Volume fails then your last hope is to completely erase the entire hard drive, repartion the disk  and try a re-install.
    If that fasils then you may have a defective hard disk.

  • I have upgraded my laptop with Adobe X1 and now all PDF's will only open as en ecyrpted word doc, pl

    I have upgraded my laptop with Adobe X1 and now all my existing savedPDF documents will only open as an encryted word document, HELP! Please!

    Hi Juliea,
    I think the file association for PDF is not correct. Instead of double clicking the file to open, Please try below mentioned
    right click on the file and select open with..
    Select Choose Default Program
    Select Adobe Reader from the list(If it is not in the list then navigate C:\Program Files (x86)\Adobe\Reader 10.0\Reader and select AcroRd32.exe)
    Remember to select the check box"Always use the selected program to open this kind of file"
    Click ok
    ~Pranav

  • How Can I install Framemaker 10 silently with serial key and license updater?

    How Can I install Framemaker 10 silently with serial key and license updater? Is there any tool to create MSI for this?
    I tried with using http://download.macromedia.com/pub/developer/creativesuite/AAMEE/win32/ApplicationManagerE nterprise_1_all.exe and its not supporting.
    I am looking for any customization tool for Framemaker 10 from Adobe or else silent install with serial and license updater

    After creating "application.xml.override" from above link
    First after installing manually Adobe Framemaker 10,Copy "pcd.db" to your source folder from "%ProgramFiles(x86)%\Common Files\Adobe\Adobe PCD\" once you run "LicenseUpdater.exe"
    1) For install create batch file "install.bat" and copy below command
    @echo off
    REM =====Install script=====
    set Current=%~dp0
    "%Current%Set-up.exe" --mode=silent --deploymentFile="%Current%\deploy\AdobeFrameMaker10_en_US.install.xml" --overrideFile="%Current%\deploy\application.xml.override" --acton=install
    COPY /Y "%Current%pcd.db" "%ProgramFiles(x86)%\Common Files\Adobe\Adobe PCD\pcd.db"
    Exit 0
    2) For Uninstall
    * download Adobeairinstaller from Adobe - Adobe AIR to uninstall adobe AIR silently and copy this exe in source folder
    Create batch file to uninstall Framemaker 10 "Uninstall.bat" and copy below command to Uninstall
    @echo off
    REM =====Uninstall script=====
    set Current=%~dp0
    REM Uninstalling "Adobe Framemaker 10"
    "%Current%Set-up.exe" --mode=silent --deploymentFile="%Current%\deploy\AdobeFrameMaker10_en_US.remove.xml" --overrideFile="%Current%\deploy\application.xml.override" --acton=uninstall
    DEL /F /Q "%ProgramFiles(x86)%\Common Files\Adobe\Adobe PCD\pcd.db"
    REM Uninstalling Adobe community help
    msiexec /x {E2B04924-29F3-F49D-71E9-B90EFEDE282C} /qn
    REM Uninstalling Adobe PDF creation Add-On 9
    msiexec /x {AC76D478-1033-0000-3478-000000000004} /qn
    REM Uninstalling Adobe AIR
    "%Current%AdobeAIRInstaller.exe" -uninstall
    Exit 0
    I think this will help....

  • Is the apple laptop with 4gb ram and i5 better than other laptop with 6gb ram and i5

    is the apple laptop with 4gb ram and i5 better than other laptop with 6gb ram and i5

    Well it depends on the age.     http://www.everymac.com/ should help you identify the age of the two models.
    Apple may use two processors called i5, but newer models have different optimizations than older models.
    The processor is usually not the main affect on speed.  RAM helps, but barely unless everything is on an SSD already.   Hard drive speed is usually the limiting factor of speed on computers.   eSATA hard drives with higher RPM can often yield the fastest results because notebook hard drives tend to be slower that are not SSD, but for those you need either Express/34 or Thunderbolt based adapters.

  • What is a good wireless printer that will work with a macbook and windows laptops?

    What is a good wireless printer that will work with a macbook and windows laptops?

    Any printer that visibly supports OS X will work fine. My personal recommendation is Brother, followed rather distantly by Canon.
    Recently I have grown to favor Brother printers over the others. They are inexpensive, their OS X integration is well-implemented, their consumables are reasonably priced, and their technical support is free forever. If you need to call them and explain that you have a Mac, you will immediately receive competent assistance.
    The third and subsequent choices are so far down from those two they're not worth mentioning. I have grown to dislike HP printers, for all the above reasons.
    Read user reviews from vendor websites - Amazon is a good place to start, since Amazon lets people write almost anything they want... right, wrong, or completely idiotic.
    Read the reviews on the respective manufacturers' websites as well, but consider the likelihood of them deleting negative reviews.
    Process all those user reviews employing your own common sense, and draw your own conclusions.
    Consider AirPrint compatibility for future needs. Those features add very little to the price over a USB - only or wireless printer. Understand that not all wireless printers are AirPrint compatible - AirPrint must be specifically indicated. Choose among this list: http://support.apple.com/kb/ht4356
    After OS X compatibility, the next consideration should be the cost of consumables. Laser printers are cheaper than inkjets in that regard.
    Here is a list of AirPrint compatible Brother printers and multifunction devices

  • My HP Color LaserJet 3600n won't install on new laptop running internet explorer 11 windows 8

    HP3600n was installed on old Gateway desktop and was accessed wirelessly from Dell laptop with Windows XP.
    I purchased new Lenovo laptop with internet explorer 11, Windows 8.1.
    I am unable to access HP3600n wirelessly for some reason. I tried to install software on new Lenovo laptop from original install disk but get error msg that it needs IE 5.0 or greater to install.  I have IE 11, what is wrong?

    Take a look at this link.
    Please mark the post that solves your issue as "Accept as Solution".
    If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
    I am not a HP employee.

  • I am working on a MacBook Pro (13-inch, Mid 2009) with boot camp running Windows 7 pro 64-bit.  Windows crashes quite often now-a-days and I need to get this fixed. I heard that updating boot camp can help.  Currently I am running Version 3.0.4 (322).

    I need to know which update(s) I can apply to help stabalize the system.

    Typing the body of the thread message in the title, huh? -)
    I am working on a MacBook Pro (13-inch, Mid 2009) with boot camp running Windows 7 pro 64-bit.  Windows crashes quite often now-a-days and I need to get this fixed. I heard that updating boot camp can help.  Currently I am running Version 3.0.4 (322).
    Only Apple could hamstring and tie Mac OS to Windows. There isn't any other than whether you can download the drivers into Windows (you can) but Apple puts a block on the installer setup even if your mac does not support it.
    Windows 7 needs at least Boot Camp 3.1 and 3.3 is what you should already have. And you are not getting security updates if you don't have at least 10.6.8 as was pointed out.  --- you arent using Software Update as you should. And you should backup and clone Mac (and Windows) as well.
    You need Mountain Lion to use Boot Camp 5.x which supports Windows 7 & 8 and 64-bit.
    I would upgrade to Lion if you can realizing that Rosetta and PowerPC are no longer supported though.
    Mac 101: Using Windows on your Mac via Boot Camp
    https://support.apple.com/kb/HT1461
    http://www.apple.com/support/bootcamp/
    Helpful Apple Support Resources (Forum Overview)
    Boot Camp Support 
    Boot Camp Manuals
    Boot Camp 5.0 Drivers
    http://support.apple.com/kb/DL1638
    Frequently asked question
    http://support.apple.com/kb/HT4818
    http://manuals.info.apple.com/en_US/boot_camp_install-setup_10.7.pdf
    http://manuals.info.apple.com/en/Boot_Camp_Install-Setup_10.6.pdf
    http://manuals.info.apple.com/en/Boot_Camp_Install-Setup_10.6.pdfcreate a Windows support software (drivers) CD or USB storage media
    http://support.apple.com/kb/HT4407
    The Boot Camp Assistant can burn Boot Camp software (drivers) to a DVD or copy it to a USB storage device, such as a flash drive or hard drive. These are the only media you can use to install Boot Camp software.
    https://support.apple.com/kb/HT4569
    http://manuals.info.apple.com/en_US/boot_camp_install-setup_10.8.pdf
    Instructions for all features and settings.
    Boot Camp 4.0 FAQ Get answers to commonly asked Boot Camp questions.
    Windows 7 FAQ Answers to commonly asked Windows 7 questions.
    http://www.apple.com/support/bootcamp/
    Is there a download of the Boot Camp 5 Support Software if I'm not using OS X Mountain Lion v10.8.3?
    Yes, you can download the Boot Camp 5 Support Software here.
    http://support.apple.com/kb/DL1638
    How do I use the Boot Camp 5 Support Software I downloaded from the web page?
    The download file is a .zip file. Double click it to uncompress it.
    Double-click the Boot Camp disk image.
    Copy the Boot Camp and "$WinPEDriver$" folders to the root level of a USB flash drive or hard drive that is formatted with the FAT file system (see question below for steps on how to format).
    Install Windows, leaving the flash or hard drive attached to the USB port of your Mac.
    Installation of the drivers can take a few minutes. Don't interrupt the installation process. A completion dialog box will appear when everything is installed. Click Finish when the dialog appears.
    When your system restarts your Windows 8 installation is done.
    Note: If the flash drive or hard drive was not attached when you installed Windows and was inserted after restarting into Windows 8, double-click the Boot Camp folder, then locate and double click the "setup.exe" file to start the installation of the Boot Camp 5 Support Software.
    How do I format USB media to the FAT file system?
    Use Disk Utility to format a disk to use with a Windows computer. Here's how:
    Important: Formatting a disk erases all the files on it. Copy any files you want to save to another disk before formatting the disk.
    Open Disk Utility.
    Select the disk you want to format for use with Windows computers.
    Click Erase, and choose one of the following from the Format pop-up menu:
    If the size of the disk is 32 GB or less, choose MS-DOS (FAT).
    If the size of the disk is over 32 GB, choose ExFAT.
    Type a name for the disk. The maximum length is 11 characters.
    Click the Erase button and then click Erase again.
    Which versions of Windows are supported with Boot Camp 5?
    64-bit versions of Windows 8 and Windows 7 are supported using the Boot Camp 5 Support Software. If you need to use a 32-bit version, you need to use Boot Camp 4 Support Software, and you must use Windows 7. 32-bit versions of Windows 8 are not supported via Boot Camp. For a complete list of Windows OS support, click here.

  • HT4527 Is there an issue with home sharing and windows 8?

    Is there an issue with home sharing and windows 8? I've tried everything and cant get mine to work.

    Here is the entire error listing after it states the installation encountered errors.
    Exit Code: 7
    -------------------------------------- Summary --------------------------------------
    - 1 fatal error(s), 2 error(s), 13 warning(s)
    WARNING: DW066: OS requirements not met for {0D96CFE6-376D-44B8-808A-16F3BEB73263}
    WARNING: DW066: OS requirements not met for {601CB5BC-03F9-43CC-86F0-C75E65E6AF31}
    WARNING: DW066: OS requirements not met for {56AE7FCC-81B2-4A63-A171-CD95C9295EF2}
    WARNING: DW066: OS requirements not met for {4717AE70-5377-45C7-A9E9-4E400485F0BF}
    WARNING: DW066: OS requirements not met for {8B59B329-26C1-48A4-A5AA-923F55B17B87}
    WARNING: DW066: OS requirements not met for {948B7277-3D4C-4672-B1DB-24B3C83D704E}
    WARNING: DW066: OS requirements not met for {25303D67-B573-460C-A0B6-B5CF2AE05045}
    WARNING: DW066: OS requirements not met for {33E08F4F-42B7-42A9-89E4-443E02738DB0}
    WARNING: DW066: OS requirements not met for {D5B1535A-FDFC-4B40-B2E2-21DA83D9CB57}
    WARNING: DW066: OS requirements not met for {AD60EB24-4CEE-4CA0-A6AA-526EAF41F2DB}
    WARNING: DW066: OS requirements not met for {F9FAC696-2E48-497D-B820-C9A65DA630DF}
    WARNING: DW066: OS requirements not met for {7DE6CDC3-CFEE-4564-813D-3F59E5D71F10}
    WARNING: DW066: OS requirements not met for {C92E440F-EE79-4A28-B1E1-EC82B6F2AF33}
    ERROR: DW020: Found payload conflicts and errors:
    ERROR: DW020:  - Adobe Flash CS5.5 depends on Adobe Flash Player 10 ActiveX to be installed.
    FATAL: DW020: Conflicts were found in the selected payloads. Halting installation.

  • External hard drive use with both Mac and Windows

    I know that you can't use an iPod (through iTunes) with both Mac and Windows, but can you still use it as an external hard drive with both operating systems?

    Yes, if the iPod is in Windows format. Mac OS X can read and write Windows formatted iPods, but Windows can't access Mac formatted disks unless special software is installed.
    (9844)

  • Problems with Acrobat 8 and Windows 7 64 bit

    Hi all
    I need help with Acrobat 8 and Windows 7.
    During the installation I'm asked to locate the file AdobePDF.dll on the disk. Selected the file in C:\Program Files (x86)\Adobe\Acrobat 8.0\Acrobat\Xtras\AdobePDF\AMD64.
    The installation finishes without any other problem.
    The problem arises when I want to create a pdf from a Word document. I'm using Office 2007. When I select he option to create a pdf from a file, I get message in the attached image.
    If I try to used the Adobe PDF printer from within Word, nothing happes. The small printer icon apprears in the Windows task bar, but that is all. If I double click on the icon, I can see the print job, but that's all. There is no dialog box that asks me to save the file.
    Assistance will be apppreciated.

    Acrobat 8 is not certified for Win7, particularly the x64 version. If you got the installation to go, the first step is to update AA8 to at least AA8.2. The x64 with XP required at least AA8.2 and I suspect that has not changed. I would suggest updating to the latest, either from the help menu (until no more updates are available) or by downloading the updates from the adobe.com>downloads page. For the latter, download ALL updates after your current version and install them in ORDER. They are not cummulative in most cases. You only need to reboot after the final update. The updates may get you going. If not, you may simply have to upgrade to AA9 or search for what others have been able to do in your situation.

  • Is anyone experiencing problems with opening mission control from the desktop.  Running mountain lion with parallels 7 and windows 7

    is anyone experiencing problems with opening mission control from the desktop.  Running mountain lion with parallels 7 and windows 7

    I had been having a similar problem on Lion with Safari pdf files despite downloading the latest Adobe Reader XI.
    I would constantly get the same messages - There was an error opening this document. The file is damaged and could not be repaired. And I would get a blank page when I tried to print the pdf if I tried printing from the Safari web page using File - Print from the top toolbar on my laptop.
    Then I came across the grey Safari lozenge with action icons.
    This allowed me, without downloading the pdf, to print the pdf file direct from the Safari page by using the Print icon on the grey lozenge that appears centrally three quarters down the screen.
    Then I discovered that if I save the pdf using the Save icon from this same grey lozenge on the Safari page I can open and print this pdf version from my desktop.
    I've tested it with a couple of different pdf files and these methods work using the grey lozenge icons but the same pdfs files don't work using File - Save As on the Tool Bar.

  • Palm pro wont sync with outlook 2003 and windows device manager?

    Palm pro wont sync with outlook 2003 and windows device manager?  Files  e.g. word docs or excel files sync o.k. but i need my contacts and i only get a error that there is sporblem with my desktop computer.
    I am using vista  and i have all updates installed.
    Post relates to: Treo Pro T850U (Unlocked)

    Do you have windows mobile device center installed(WMDC)? If not download it from here http://www.microsoft.com/windowsmobile/en-us/downloads/microsoft/device-center-download.mspx
    Be sure you download the correct version for your PC. If you have 32bit OS or 64bit OS. To find this out, right click on Computer under start and select properties. Near the middle it should say 32bit or 64bit. If you know you have the correct software. Open up the control panel and go to sync settings. Right click on the partnership you have setup and select delete. On your device go to Start-->Programs-->Activesync-->Menu-->Options tap on Windows PC and select Delete. Then once both are done resetup your partnership. But this time uncheck everything. Then once it is done syncing. Go to Mobile device settings and change content sync settings and select Contact. Click save and let it sync. Do the same for calendar, tasks, and notes but leave the last item checked. So when Contacts are done syncing you go and check Calendar and leave Contacts

  • What are the minimum hardware requirements to install both MAC OS X Snow Leopard and Windows on a Mac

    Hi,
    I want to install both MAC OS X Snow Leopard and WINDOWS on a same PC. Is it possible..then mention the minimum Hardware support to install both Operating Systems on a PC. I am waiting for relevant reply from Apple Support Team.
                                            Thank You.

    I am waiting for relevant reply from Apple Support Team.
    Then you'll be waiting a long time. This is a user to user support site hosted by Apple. The Apple Support Team doesn't respond to posts here.
    For Snow Leopard, you need an Apple computer with an Intel processor of any flavor. Here are the specs from the Apple Store:
    System Requirements
    Mac computer with an Intel processor
    1GB of memory
    5GB of available disk space
    DVD drive for installation
    You'd have to contact Microsoft to find out what specs its OS requires, but I imagine the above would cover it.
    Also note that Snow Leopard is only licensed to run on Apple branded equipment.

Maybe you are looking for

  • A simple fix to the "No Content" error after updating to iOS 4.2.1.

    I had the same problem that others are reporting after updating an iPhone to iOS 4.2.1 where all of my media disappeared. However I don't currently have access to my PC to sync with iTunes but have posted a really simple fix that worked for me here:

  • Random errors on Flash Builder 4.5.1 mobile project: FXG elements

    I'm kind of frustrated because Flash Builder is starting to report random errors on some mxml components that include FXGs. It's reporting the following errors: 1. 'MyFXG' declaration must be contained within the <Declarations> tag, since it is not a

  • Cannot get scan to work on Deskjet428​0

    i have the photosmart software down loaded but i cannot scan anything from the printer to my pc any suggestions email me at [email protected]

  • Re: Batch updates & deletes

    John, I suspect that you could accomplish what you want like this: Pass the values needed in your WHERE clause to the SQL method, and use them as host variables in the SQL statement. Something like this: .....deleteTableBlah(p_One, p_Two, ...., p_N)

  • Hw to Get the number of table columns and their name in procedure ?

    Friends, I have to write some procedure. In this procedure, I want to get the total number of columns in a table. Also I want the column names for that table. I have a requirement that I need to add column in the table dynamically in some cases. Late