Installing Oracle8i on WIndows 2000
I am currently trying to install Oracle8i (8.1.7) on windows 2000 professional. Everytime I run setup the egg timer comes on and nothing happens. Anyone have any ideas?
Success at last! I'm installing Oracle 8.1.7 on a p4 running win 2k as I type this. I downloaded the java sdk 1.3.0 from java.sun.com/j2se/1.3/install-windows.html and installed it. Then I located the symcjit.dll in my Oralce installation folders (on my hard drive) and renamed it. Then ran the installer and voila! it worked.
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Subramaniam Perivemba ([email protected]):
I'm having the same problem on windows 2000 running on a pentium 4. Apparently the file symcjit.dll is used to identify the processor does not do so on a P4. The version of thes file should be 3.10.107 or higher. Dell suggested I install the java runtime environment v 1.3.0 and this may correct thr problem. I did so but no luck. I did a search for this file and the only one I found was in the Oracle installation folder.
<HR></BLOCKQUOTE>
null
Similar Messages
-
How to install 10g on windows 2000
Hello
Please guide me step by step as how to install 10g on windows 2000 .
I am a beginner and I want to install this setup in my office.At present we are using oracle8i on windows 2000.We want to do a fresh installation in a new setup and hence for the time being we are not going for upgrade or migration from 8i
Please guide me .
Thanks in advance.Just follow the installation guide, that's all you need,
http://download.oracle.com/docs/cd/B19306_01/install.102/b14316/toc.htm
Make sure install Oracle 10g into different ORACLE_HOME than 8i -
Problem Installing 817 on Windows 2000 with RAID Array
I am having a problem installing Oracle under windows 2000 which has 2 x 60 GB discs configured in RAID array. When I run the setup program the cursor goes busy for about 10 seconds and returns back to normal and nothing happens !. No errors nothing.
However when I run the Object Manager in the ods_preinstall directory it starts but in the log file I get the following error message:-
02/14/02 09:46:18 : (892) : Error in IO Control call for disk PhysicalDrive0 (Error 21)
02/14/02 09:46:19 : (892) : The count = 28
02/14/02 09:46:19 : (892) : The signature is 0x443aa035
02/14/02 09:46:19 : (892) : Error: First Partition of the disk must be an extended disk
02/14/02 09:46:19 : (892) : Found the partition: 7
Any idea whats happening....? Has anyone seen this before. Do I need to do something special in teh RAID..?
TIA
MartinHere are some possible solutions:
1. The installation notes state that you must be logged on as Administrator to be able to install 9i. Are you logged on as the Administrator? Being logged on as user01 with Administrator priviledges isn't the same as Administrator.
2. Is the disk full? If I remember my installation correctly, I needed 3 times the size of the files. The documentation will tell you how much space you need.
Hope these two questions help
Regards,
Michael -
How to install Oracle7 on Windows 2000 Pro??
Hello all,
I got the following message when install Oracle7 on Windows 2000 Pro.
"oback.vrf(379) OS_ERROR while getting service status portmap"
How to solve it?? Thank you.Oracle7 ???!!
Really you need that (so old) version ? Reason ?
Anyway, see if Re: Oracle 7 on a Pentium 4 may be of some help. -
How to Install OPS on Windows 2000 Advance Server??
I just try to install Oracle Parallel Server on Win 2000 Advance
server, but it seems that the installation is not success.
I am using 2 Compaq Proliant ML530 PIII/Xeon as a hardware and
Windows 2000 Advance Server for Operating System.From the
vendor's tools checking, it stated thad clustering service is
already installed (ok!)
When I install Oracle Parallel Server, the default drive for
installation is already drive V (share disk), and Oracle
Parallel Server has been selected on the available product
components page, but I don't see node selection for install.
(According to Installing and Creating an Oracle Parallel Server
Database manual, I must select the nodes to which I want to
install the software from cluster node selection screen page)
Also when creating database (using Oracle database configuration
assistant), it does not displays database creation selection
(OPS or single instance configuration)as the first page, but
directly go to the second page (create/delete database).
Is the problem caused by wrong step of oracle Installation or OS
itself (ie: Cluster Manager)??
Anybody have experience on it can help me?
ps:I am using Oracle 8.1.7
Regards,
SuryantoPlease check whether you have installed the OSD layer (
Operating system dependent layer). Such layer can be obtained
from your hardware vendor ( eg compaq). You should have such
layer in your system before installing the OPS.
If you have such layer installed, you can see other nodes during
installation of Oracle and OPS.
Hope this help! -
How do I install Oracle8i on Windows XP
I am having problem to install Developer 6.0 and Oracle8i on Windows XP.
Please suggest me how to install it.
ThankHOPE YOUR PROBLEM WILL BE SOLVED
SEE THE BELOW LINK :
http://webcentral.hud.ac.uk/help/guides/ORACLE%20-%20installing%208i%20PE%20on%20P4%20XP%20Pro%20PCs.pdf?PHPSESSID=9740b7d887a72e9e0ef312f4a98ab885 -
Error when installing RAC on windows 2000
Hi,
I'm installing Oracle 9i(9.0.1.1.1 EE) RAC for the first time. It has been an interesting experience,
with many bumps in the road. But now I'm stuck.
I have installed the 9i EE software, but when I try to create a database ( using DBCA), I get an error :
PRKR-1005 : adding of cluster database cludb configuration failed, PRKC-1018 : Error getting coordinator node
The error occurs after I have finished configurating, and the actual database creation starts.
I did get another error earlier : PRKR-1028 "raw device \\.\srvcfg is invalid, [HINT: initialize raw device by using
'srvconfig' tool]
That error disappeared after running srvconfig -init.
I have restarted the Oracle GSD services on both machines, but I still get the same error.
The OS is Windows 2000 Advanced Server, running on a Compaq Cluster.
Br,
StefanFor more information about it:
Real Application Clusters Administration Contents / Search / Index / PDF
Real Application Clusters Concepts Contents / Search / Index / PDF
Real Application Clusters Deployment and Performance Contents / Search / Index / PDF
Real Application Clusters Documentation Online Roadmap Contents / Search / /
Real Application Clusters Real Application Clusters Guard I - Concepts and Administration Contents / Search / Index / PDF
Real Application Clusters Real Applications Clusters Guard I Configuration Guide Release 2 (9.2.0.1.0) for UNIX Systems: AIX-Based Systems, Compaq Tru64 UNIX, HP 9000 Series HP-UX, and Sun Solaris Contents / Search / Index / PDF
Real Application Clusters Setup and Configuration Contents / Search / Index / PDF
http://otn.oracle.com/pls/db92/db92.docindex?remark=homepage
Joel Pérez -
Oracle 8i EE Install problems on Windows 2000
Problem 1 - LENGTH OF INSTALL FILES PATH.
The Oracle Universal Installer was coming up fine, but the "Next" button wouldn't do anything. After much trial and error, I discovered this to be related to the path of the install files. Rather than burning to CD, I had copied the install files into a directory C:\ORA816 - when I renamed this directory to just C:\O, the "Next" magically began working. This problem only occurs on Windows 2000, not NT4.
Problem 2 - CREDENTIAL RETRIEVAL FAILED.
I got this error (ORA-12638) from the Database Configuration Assistant. This just happened, so I haven't had a chance to figure it out. Has anyone encountered/fixed this problem in Windows 2000? I am running the install as Administrator.
nullRe: Problem 2. Just found out that this problem is resolved by removing the line SQLNET.AUTHENTICATION_SERVICES from
%ORACLE_HOME%\network\admin\sqlnet.ora
(see: http://technet.oracle.com//tech/migration/workbench/htdocs/relnotes.htm) -
Trouble installing XP on Windows 2000 Thinkpad T43
I am trying to load XP pro, on a Thinkpad T43(2668). It was previously on this system. Currently the system has windows 2000 pro. When installing XP disc, the disc will not load. The bios is set load CD priority. I tried formatting, and deleting, and recreating the active partition, in Windows 2000 recovery. Also tried installing Xp pro disk, on clean system (no OS). Nothing works, CD, installation stalls and we get error messages
Error messages: i386/vga.oem, i386/ntkrnlmp.exe , blank screen, inf file txtesetup.sif corrupt or missing, are all errors I have gotten. Different error messages with each attempt at installation. Also have gotten “At: press any key to boot from CD”, no response.
I ran a RAM test on this system for 12 hours, and there are no errors.
This XP pro CD loads in other PC’s, no problem.
Any ideas?
Thanks
BAYou're looking at a bad media drive, or a bad disk itself, regardless of the fact that it loads on other units it may still be partially defective.
Try borrowing another media drive or using an USB CD-ROM to load the OS.
Good luck.
Cheers,
George
In daily use: R60F, R500F, T61, T410
Collecting dust: T60
Enjoying retirement: A31p, T42p,
Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you. -
Install Error Under Windows 2000
I get an error when I try to install Server 7.3 (it's old, I know) under Windows 2000 Server:
obackup.vrf(379) OS_ERROR "while getting service startup pormap."
Anyone know what this means and I how get beyond it?
Thanks.I get an error when I try to install Server 7.3 (it's old, I know) under Windows 2000 Server:
obackup.vrf(379) OS_ERROR "while getting service startup pormap."I have the same problem. Can anybody help?
TIA,
Vladimir Antropov
[email protected] -
Installing Oracle11g on windows 2000
Hello
I am a beginner and I have a doubt regarding installing Oracle11g .
I have a server with OS windows 2000/2003.
I want to install Oracle11g on it and create all my database from 8i to 11g say using export/import dump files.
Next I want to connect my application from client PC with OS vista/XP which is developed in forms 6.0.
This set up is in client/server mode (Intranet only) and there is no connectivity through internet.
Please suggest how to go about and is it possible to work with Forms6.0 and oracle11g.
Thanksis it possible to work with Forms6.0 and oracle11g.I'm afraid you're out of luck... that combination is not supported, as you can see in Oracle Certification Matrices
The last version supported with Forms6.0 is 10g, so you should
- upgrade your forms to 10g
or
- use 10g DB. -
Installing Eclipse on Windows 2000
Hey, I'm trying to get started with Java development on Windows 2000 Professional. I've got Eclipse installed but I'm not sure if it's working right. I tried to build the latest release of JUnit as it says in the Eclipse help file, but I get 19 warnings.
Is this normal? Or is it an indication that JUnit did not compile correctly (and therefore that there may be something wrong with my Eclipse installation?)
Thanks in advance.Try asking the people from JUnit:
http://tech.groups.yahoo.com/group/junit/ -
Installing Console on Windows 2000
Can anyone help, I think Im just being extremely dense here?
Am I right in assuming that in order to install the Iplanet Directory 5.1 console on Windows 2000, I have to download the software, or find the disk and do a custom installation, installing just the console?
Thanks
DaveCan I download the Windows 2000 binaries from sun.com? I currently dont have the disks, do you have a link?
Thanks
Dave -
Installing Oracle9i on Windows 2000
I am installing the 9i database enterprise edition on windows 2000 with service pack 3. The installation stops at 16 %. How can I rectify this issue?
Thanks in Advance.Possible Solution.
I had to boot into windows safe mode, wipe out the existing information found in the c:\<your_install_directory>. (my Win2k is a fresh install,but I had already done about 3 failed attempts of the database install)
Then I turned off the any windows services that Oracle had set up.
Afterwards, I crossed my fingers and ran the installer again.
This time it worked. I'm not too sure if this is any help to some of you, but it worked for me.
Anson -
Installing 11i on Windows 2000 server
Hi
I am trying to install Oracle Applications 11i on Windows 2000
server. I had 40GB space. My system is hanging after i
inserted 'Tools - Disc 1' CD. Then i reformated system and tryed
with stage installation. but when i am copying 'Tools - Disc 1'
CD i got the following message.
" Error performing inpage operation "
Due to of this i am unable to proceed. Could some one tell me is
this installation problem, if so how can i solve this or CD
packing problem. This is urgent.
Thanks in advance
SaratCheck "Note: 215868.1 - 11i Release Notes" for more details about Windows OS requirements
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=215868.1
11.5.10.2 installation update notes is available through Note: 316806.1 - Oracle Applications Installation Update Notes, Release 11i (11.5.10.2)
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=316806.1
Also make sure you install Install XML Parser since on Windows platforms, Rapid Install requires Microsoft XML Parser 3.0 Service Pack 4 (or later) in order to set up and start services.
1) Open the Windows Explorer
2) Navigate to the system root directory (default is C:\winnt\system32).
3) Right-click msxm13.dll. Select Properties. them click Version.
4) If XML Parser is not already installed, or if the version on your system is not 3.0 SP4 (or later), go to the following URL and download the Microsoft XML Parser 3.0 SP4 Software Development Kit:
http://www.microsoft.com/downloads/details.aspx?FamilyID=b432cd45-b7ed-4c32-a443-ec56f10ee175&displaylang=en
5) After installing MSXML 3.0 SP4 SDK, copy msxm12.lib from <Microsoft XML Parser SDK>\lib to <Visual C++/C>\lib, where <Microsoft XML Parser SDK> is the installed location of the MSXML 3.0 SP4 SDK, and <Visual C++/C> is the installed location of Visual C++/C 6.0.
For pre-req software, make sure NOT to install it in a directory that contains spaces and NOT under APPL_TOP
Maybe you are looking for
-
How can i delete a picture from camera roll without deleting everywhere
how can i delete a picture in camera roll without deleting everywhere
-
When I try to print out 4x6 pictures in PSE, the size is all messed up. I've tried adjusting every setting I can think of, and nothing has worked. Can anyone give me any pointers on what the setting should be if I want to print a borderless 4x6 ont
-
Com.sun.corba.ee.impl.encoding.CDRInputStream not found
i get this classdef not found error when starting OC4J Does anyone know what jar is this a part of?
-
I was just wondering if anyone had any recent experience with how long it is taking to get a repaired/replaced Nano (i.e. how long after your support ticket has gone to "Replacement Ordered / Order Created" to when it actually ships and is received).
-
CUE upgrade from 2.3.3 to 7.X
HI, We are upgrading Our existing IPT & IPCC clusters. Last weekend we have upgarde the CUCM from 5.1 to 7.1.6 sucessfully. This weekend we are planning to upgrade the CUE xpress to 7.X I would like to know Upgrade path, strategy, Planning and also t