Installing Orcale DB System under Windows

hi,
I'm going to install Netweaver04 SR1 . My question how is oracle installed ? Through Sapinst or manually or does SAPINST require that Oracle is just installed before the Web AS Installation is done through SAPINST. It might be a simple question , but i searched all the documentation and I'm not sure if Oracle is installed separatly and manually or SAPINST does it on his own. I'm not talking about DBSchemas I'm talking about the Basic Installation of the DBMS.
Cu Francesco

Hi Francesco,
SAPInst can guide you through the Oracle DBMS installation.
When you run the Web AS installation, at a certain point when you choose to install the Oracle software SAPInst will ask for the CDs and will guide you through the whole process.
For more information have a look at the <a href="https://websmp101.sap-ag.de/~sapidb/011000358700009391972004E">SAP Web Application Server 6.40 SR1 Java on Windows: Oracle (Part I - Planning and Preparation)</a> document.
Hope that helps!
Vladimir

Similar Messages

Installing Oracle 9i RAC under Windows XP

hi, all?
I am not good at Oracle, but I have to install Oracle 9i RAC on Windows XP(sp1) machine.
Is it possible to install it?
if so, is there any guide documents about it?
All documents which i found are talking about installing under Linux or win2k.
It didn't mentioned anything about win xp.
Thanks in advance

it is not support

Installing HP 5500 Designjet under Windows 7

  In Sept. 2004 I purchased a HP 5500 Designjet printer, Model Q1253V, for proprietary software development during my retirement. Well, that stopped abruptly shortly after, due to a health issue, and now I have this printer in our living room and wish to sell it.
  First, I suspect I need to have it running so prospective buyers can see that it works and what it can do.
I've downloaded, several days ago, the latest driver from HP. I'm trying to install it to my Win 7 desktop which, being modern, has no parallel port (one of the printer's ports is parallel). So for the install, I disconnected the router network cable from the machine and replaced that cable with the network cable to the printer.
  I next turned the printer on and allowed it to boot. I received the Ready display but, not surprising, there is a blinking message at the bottom -- Printheads Replace.
  I found the Printheads menu, drilled into each and learned the following:
   Lt Cyan, 95%, 04 (probably the age of the printhead)
   Lt Magen 92%, 04
   Yellow, 90%, 04
   Cyan, 96%, 04
   Magen, 92%, 03
   Black, 96%, 04
Leaving the printer connected I next turned to the driver installation. For reference, that file has following properties: HPDesignjet5500Series.exe, 58,845,048 bytes.
I cancelled that driver installation because I can't get beyond the following setup message:
"HP Designjet 5500 Series Setup"
  "Printer not found. Verify that the printer is properly connected and turned on."
I have a few questions before I proceed.
  I'm not very good at this network stuff. My notes from the original installation in 2004, under Windows 2000, shows an IP address of IP=192.168.1.101
Should I be specifying something like IP address in lieu of letting the driver hunt for the printer?
My internet network connection is like this: A cable from the satellite dish is connected to its modem. A router distributes those signals to the desktop computer and 3 other potential recipients.
Instead of disconnecting my router from the desktop, can I simply put the printer's network cable into one of the router's 3 empty inputs? That way, I can retain the desktop's internet connection during this process.
Some time ago I attempted printing some test routine from the printer and it did fairly well for 6 of the 8 colors. Is it possible that I can restore the "bad" printheads with, say, a wet (water) dishrag or a cloth with some type of solvent -- distilled alcohol, etc.?
Any advice will be appreciated.
Len Miller

This forum is focused on consumer level products. For the Designjet you may have better results posting in the HP Enterprise Designjet forum here.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

PDF files used to open with a "save" option, and I have Acrobat 9 Pro installed on my system (running Windows 7). Now, that icon is gone and I can't save. Is there another way to configure the plug-in or is Firefox preventing this or what? THANK YOU.

this is a new problem. Running Windows 7, latest update of Firefox 3.6.13. Under "Applications", I'm set to "open Adobe Acrobat inside Firefox" (which is what I have always done, then if I wanted to, I saved the PDF file elsewhere). should I/ can I open the PDFs outside Firefox, with my Adobe 9 Pro program?

■ Use '''Tools -> Options -> Applications ->''' <br> then look under content for Adobe Acrobat forms etc;
<br> note a choice of options is usually available
* see [[Options window - Applications panel]]
Firefox is of course a web browser. <br>Acrobat reader is Adobe's program used to read and display the pfd files on your computer. Other programs may be used instead of Acrobat reader. You would normally have the Acrobat program and the pdf file present on the local computer, often both on the same hard drive, if you were opening individual pdf files directly with Acrobat.
Firefox uses a plugin so that it may use Acrobat to open pdf files and display the results within a firefox window or tab. If you do not have that plugin installed, or it is not enabled firefox may be unsure what to do with the file and offer to save it to whatever your default local download location is, without attempting to open the file in firefox.
■Also see
* [[Opening pdf files within firefox ]]
*[[Using the Adobe Reader plugin with Firefox]]

How to install old fireworks 2 under windows 7?

i tried to install fireworks 2 in windows 7. It stops with the error message: "registration error, try regedit" Obviously this is because the registry format has changed. Is there by chance anybody who knows what are the proper entries for Fireworks 2?
Thanks
avner

Hmm. Get a VM Ware virtual machine and find a copy of Windows 98 SE to run on it. Try installing Fireworks 2 on that.

Issue with default install of SOA suite under Windows

Hello,
I installed SOA Suite without error, using the defaults of the Basic Installation.
When I start the SOA Suite, it starts up without error, but reports that ASG is Status=Down
When I try to create an Integration Server in JDeveloper, and test it, everything works, with the exception of the ESB Server:Fail, which in the details is listed as:
ESB Connection, Not Run
Can anyone explain these behaviors (ASG Status=Down and ESB Connection = Not Run)? Are these normal based on not installing products from the Advanced options? I'm in the process of an evaluation and I don't want to go too far down a path if my system is already somewhat broken.
Thanks.
--T
Thank you very much.

The ASG down is normal - it is not causing the other issue you have.
The JDev integration server connection error (ESB not run) is unfamiliar to me. Make sure you have created the Application Server connection properly (choose standalone). The Test Connection button for the Integration Server connection shows you status for the Application Server, the BPEL Server, and the ESB Server - what does it say for each of these?
Heidi.

Installing CS3 under Windows XP x64

Here's what happens installing CS3 Web Premium under Windows
XP 64-bit
Contribute 3 and Version Cue are grayed out. Acrobat,
FL,FW,DW,PS,IL are checked.
It also says Minimum requirements not met. I click next.
Progress bar stops at about 20% (Currently installing Shared
components). I left it overnight with no progress.
When I click cancel: Dialog box appears:
Are you sure you want to quit the installer?
Click Resume to continue installing.
The following components have already completed installing.
If you quit now, you must run Setup again to remove these
components or to finish installing Adobe Creative Suite 3 Web
Premium
* Shared Components
When I click Quit, the summary says
Successfully installed: 1 component(s):
Errors: 9 component(s)
X Adobe Creative Suite 3 Web Premium
User cancelled payload installation
(same with Acrobat, Dreamweaver, Fireworks, Flash, etc)
I have the installation log that I can email.
Calvin

CS3 forum?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Cal22" <[email protected]> wrote in message
news:f2fgns$a8n$[email protected]..
>I haven't had a response from the CS3 forum, so I'll
continue the
>discussion
> here. (I like the Fusetalk interface better anyway)
>
> To answer your questions, yes, I know it is not
supported under 64 bit
> windows. Just posting in case anyone has had success.
>
> -No previous CS3 betas were installed, I have 7 Gigs
free. I'll try the
> the
> MS Cleanup utility. Failing that I'll have to either
install a different
> OS or
> install it on a different workstation.
>
>
>

Cannot install Visual Studio 2013 on Windows 7 Ultimate x64

Hi,
I'm trying to install Visual Studio 2013 under Windows 7 Ultimate SP1 x64. If it matters the Windows O/S is an image running under Parallels.
I've had Visual Studio installed on this machine before (I can't remember the version) but have uninstalled it.
I'm getting an error "Microsoft .NET Framework required for Microsoft Visual Studio Express 2013 for Windows Desktop - ENU".
I've been Googling this issue for hours, trying numerous things suggested, to no avail. Apparently it's a common error.
I've got the .Net Framework 4.5.1 installed. I've also reinstalled it and repaired the installation. I suspect the error message is a stupid red herring.
I'm at my wits end on this. Any advice on how to get this bug ridden swill to install?
P.S.: Clearly this is a known and highly frustrating issue for many people. Why can't Microsoft find the bug, fix it, and put an updated installer on their download site. Is this too much to ask?

You need to go to the MSDN website for Visual Studio 2013 found @
http://msdn.microsoft.com/en-us/library/dd831853.aspx
The webpage with the system requirements has a Support tab for help with Visual Studio @
http://www.visualstudio.com/products/visual-studio-2013-compatibility-vs
You need help for the application, not for Windows 7.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”

Installing hp scanjet 8270 under Win 7 32 bits

Trying to install the subject scanner under Windows 7 32 bits O. S. Unloaded and installed driver setup_EMC_8270_3.exe, no error message, but no icon on the desktop.Impossible to start a scan from the front panel.Disintalled and reinstalled several times, following HP Support suggestions, with no result.Extremely grateful for any suggestion. Thanks

Hi:
HP does not support your model for 32 bit operating systems.
You will need to go to each of the hardware device component manufacturers websites to see if they have W7 32 bit drivers.
Chipset and graphics: Intel
http://www.intel.com/p/en_US/support/detect/
Audio and ethernet: Realtek
http://www.realtek.com.tw/downloads/

IDM 7.2 under Windows Server 2008 R2 (SQL Server ): Which NTW ? Which JVM ?

Hello,
We are installing IDM 7.2 under Windows Server 2008 R2 using the database SQL Server 2008 R2.
1/ Which NetWeaver should we use to install the Java Application Server (NTW 7.3 or NTW 7.2)?
Using install guides 7.2rev8, we tried NTW 7.3 but it comes with JVM 1.6 that isn't supported, according to the PAM.
Should we install the AS Java with NTW 7.2 that comes with JVM 1.5 (JVM 1.5 being supported)?
2/ Has someone installed IDM 7.2 under Windows Server 2008 R2 (SQL Server)?
If yes, which NTW was used (7.2 or 7.3)? Which JVM was used (1.5 or 1.6)? Which JDBC drivers (1.2 or 3)?
Thanks a lot for your replies,
Regards.

{quote)For the Java RE are you using 32 or 64 bytes ?{quote)
C:\Users\Administrator>java -version
java version "1.6.0_30"
Java(TM) SE Runtime Environment (build 1.6.0_30-b12)
Java HotSpot(TM) 64-Bit Server VM (build 20.5-b03, mixed mode)
{quote)Which JDBC driver do you use (1.2 or 3.0) ?{quote)
{quote)In the IDM Identity Center, for the dispatchers option tools, how do you fill it ?
We are using :
Path to java exe: E:\usr\sap\ID1\J00\exe\sapjvm_6\bin\java.exe{quote)
C:\Program Files\Java\jre6\bin\java.exe
{quote)Path to jvm.dll: E:\usr\sap\ID1\J00\j2ee\JSPM\sapjvm\jre\bin\server\jvm.dll{quote)
C:\Program Files\Java\jre6\bin\server\jvm.dll
{quote)JDBC driver jar: D:\Microsoft SQL Server JDBC Driver 3.0\sqljdbc_3.0\enu\sqljdbc4.jar{quote)
C:\sqljdbc\sqljdbc4.jar
{quote)JDBC driver names: xxxxxxxxx (can you write us what you use){quote)
com.microsoft.sqlserver.jdbc.SQLServerDriver
{quote)CLASSPATH extension: D:\Microsoft SQL Server JDBC Driver 3.0\sqljdbc_3.0\enu\sqljdbc4.jar{quote)
No Classpath specified

Adobe CS4 under windows 8.1 64 bit?

I've got problems to install my Adobe CS4 under windows 81. 64 bit. It use to run under windows vista 32 bit. Does there any update or plugin exist tio fix this problem?

install using compatibility mode.

Is there a way to install Bootcamp without purchasing a Windows disc?

I understand that to install Bootcamp on a MacBook Pro (15"), I need a Windows 7 installer disc. I am happy to purchase this if absolutely necessary, but it seems silly to buy Windows 7 all over again when I have it running on another laptop I own. Is there any way to somehow make my own installer disc from my own version of Windows 7 instead of buying a completely seperate copy just for use on Mac? Thanks

Windows license is an MS issue, not a Bootcamp issue. MS says "one install per license".
To install in Bootcamp, you need a copy of Windows install with *ALL* drivers, be it a full (install as often as you wish) or OEM/"System Builder" (install once, but beg permission to install on another system). Windows disk that came with your old Dell or HP or Gateway only has drivers for that system.

HP OfficeJet J6410 won't install under Windows 8 & Windows 8.1

Recently I made a posting about installing the HP OfficeJet J6410 printer on my daughter's new HP laptop.
Please, before answering my question, I would like to point out to two earlier postings from me.
1. The first posting.
Around april this year (2014) I bought a new laptop for myself (a HP 15 Notebook PC, d081ed). It had Windows 8.1 pre-installed on it. At first I had problems installing the HP OfficeJet J6410 printer. I received a very usefull reply by which I was able to solve the problem.
Read more about this posting here: http://h30434.www3.hp.com/t5/Printer-All-in-One-Install-Setup/Officet-J6410-won-t-install-under-Wind...
2. The second posting.
Almost two weeks ago a bought a second HP laptop (HP Pavilion TouchSmart 11-e000ed) voor my daughter. This laptop had Windows 8 pre-installed on it. I experienced the same problem with the printer and made a posting. Unfortunatelly that didn't resolve the problem. I received no further reactions. The problem is still unsolved.
Read more about this posting here: http://h30434.www3.hp.com/t5/Printer-All-in-One-Install-Setup/HP-OfficeJet-J6410-won-t-install-under...
A. What have I done afterwards?
Afterwards the previous above I first made sure I had all the updates for Windows 8 installed. I've read that in the case of the laptop of my daughter I could upgrade for free to Windows 8.1. So I did that too.
B. Why a second posting?
Since I upgraded to Windows 8.1. I realized my second posting wasn't quite accurate anymore. I realized it could lead to confusion since I now don't have Windows 8 installed on it anymore.
Now here's the strange part.
B.1.
On my own laptop (d081ed, HP 15 Notebook PC) I have the same operating system (Windows 8.1. ) as I now have on the laptop for my daughter (11-e000ed, HP Pavillion Touchsmart)
B.2.
After upgrading I tried the same steps, as described in my first posting, on the laptop for my daughter.
Strangely enough, and although we now both have a HP laptop with exactly the same operating system on it, I can not get the printer installed.
What can be wrong? I tried updating, the scrubber, the packages to solve the C++ redistributable packages... nohting works! And worse!! It seems I somehow made the problem worse...
Why do I think that, and are there things or error-messages that are different than the one I experienced before (with my own laptop, see point 1 above at the beginning of this posting).
B.2.1.
The first thing that is different:
If I want to install the printer, and after it extracted files, checked the system and prepares it for installation, I receive the message:
C:\users\<username of my daughter.\AppData\Local\Temp\7zS0FF0\Setup\de..
This is different than the message (Program: C\Users\IRN\AppData\Local\Temp\7zS28Db\Setup.exe) I experienced with my own laptop (the d081ed).
Note the difference between:
..Temp\7zS0FF0\Setup\de.. (<-- that is the message I get on the laptop of my daughter)
and
..Temp\7zS28Db\Setup.exe (<-- that is the message I had on my own laptop)
B.2.2.
The second thing that is different:
At some point I installed, after upgrading to Windows 8.1, the SP 40669 package. I can't remember having done that on my own laptop.
B.2.3.
On my own laptop I installed the C+++ packages for 2005, 2008 and 2010.
On the one for my daughter I only installed the C+++ package for 2010 (KB2562063, version 10.0.30319 and 10.0.40219, but I don't think that is the problem really, correct my if I'm wrong).
B.2.4.
Before I upgraded to Windows 8.1. I got an error message at rebooting the system (in Dutch
explorer.exe - Toepassingsfout
De instructie op 0x5d2c3e01 verwijst naar geheugen op 0x00000000. Een lees- of schrijfbewerking op het geheugen is mislukt: read.
Klik op OK als u het programma wilt beëindigen.
And after that the message doesn't wait for your click on OK. It just flashes away very quickly. Since I got that message a couple of times, I did manage to capture it with the camcorder on my mobile phone. In that way I was able to describe you the message as exactly as here above.
I sometimes get the message again, and then not. So it's not consistent. It seems to me the problem there is with explorer.exe and not with the printerproblem, but I'm not sure. Couple of days later, there were new updates for Windows 8.1, which I installed, and the error-message didn't show up again the last few days.
Last request.
I would really appreciate some help with this. The reason I like the printer installed is because of the HP Solution Center. I'm sure my daughter would use it for scanning documents needed for her study and printing activities.
I installed the basic printer for the time being, but only as I temporarily work-around, so she can - at least - print all of her study materials. Scanning, on the other hand, is some differtent then, but that is a known problem with the basic printer driver.
I truly don't understand this problem. We both have an HP laptop, we both have the same operating system now (Windows 8.1) and stil .. on my laptop I managed to install the printer, and on hers not.
Please help me.
(p.s. I do have a HP support Pack for both laptops, and if one thinks that this problem is too complex and would redirect me to HP support ... no offense taken, from my side. But, I really would like to try to solve problem myself at first and would really appreciate your help with it. )

Hello RNRMusicMan,
Glad you're willing to help me out. So Sorry I couldn't send a message earlier. I had a few appointments the last few days and afterwards I had to little time to spend enought time to try to solve te problem.
But o.k, let's continue.
I've followed the steps you mentioned as a second option. I'll describe what I've done.
First I tried the Hp printer install wizzard
No succes
Same error occured …\setup\de.. (at the second fase of the installation program of the printersoftware)
Restarted the system
I used the Scrubber
L4
Error: uninstaller didn't work. Clicked ok
Restart
At restart I got the same error about something with the memory. (In dutch; 'De instructie op 0x5d2c3e01 verwijst naar geheugen op 0x00000000. Een lees- of schrijfbewerking op het geheugen is mislukt: read.' and please note that 0x5d2c3e01 was this with different numbers etc, but I guess that's just the adress in the memory where the program wants to read/write to)
I continued with cleanboot
Msconfig – services – hide all microsoft services – disable
Startup – system configuration – open task manager
On startup tab in task manager – I disabled each startup item
Closed taskmanager
Startup – system configuration – checked ok box
Restarted
Tried to install again with the OI_AIO_J6400_Full_Win_WW_140_4.exe software I downloaded from the hp website
At ‘systeem wordt voorbereid op installatie’ I got the same error again: ‘C:\Users\Simone\AppData\Local-\Temp\7zS46SD\Setup\de..
After this I followed the steps as described to start up again normally (that is: msconfig, enabling the services again, etc.) and that step went o.k and as aspected, so no problems there.
After that I restarted the system again. I didn't get the message about the problem with the memory again. So I guess that must have been due to the error in the scrubber program.
I really don't understand this. Me and my daughter both have a hp, both the same OS (windows 8.1), and on my laptop I got the printer running and hers not. What can it be? I'm guessing that there most have been something that went wrong then with either the installation with one of the windows 8 or windows 8.a upgrades, or with the upgrading from windows 8 to windows 8.1. Or is that to far fetched? But that just a question I have, trying to understand what went wrong or what could be the cause of this.
So what now? It didn't work.
Update (29-9-14):
Since all the suggested solutions didn't work out I decided to start all over.
One of the reasons I decided to do so, was the following:
I've got an external DVD writer (Samsung, Slim External, model SE-8084D/TSWS) that I needed to use for installation of the HP J6410 CD that came with the printer, since the laptop of my daughter doesn't have a built-in DVD player.
Now here the strange thing! When I use it on my own laptop, it starts the software on the the HP J6410 DVD flawlessly. No problems there! But, when I connect it to the laptop of my daughter, it sees the CD and I can explore the files on it. But, when I try to start HPSetup.exe on it it does ... nothing!! Now that's very stange! Me and my daughter both have a HP laptop, with the same OS. Still it functions normally on my laptop, and on for the one for my daughter it does nothing. Same with the software that you can download from the HP site. It runs on my computer, but gives errors on the one for my daugther. So I guess that was a good reason to decide to start all over again from scratch
This is what I've done so far.
- I made a (full) factory recovery.
- I've installed all the updates for Windows 8.
- After that I upgraded to Windows 8.1 again and installed all of the updates for it as well.
- I removed the antivirus program (Norton Antivirus)
- After that is done I tried to install the printer again.
No success!
But.. I'm convinced I've found out where the problem might lay.
My daughter had c++ 2012 redistributable installed (version 11.0.50727).
My other laptop doesn't. An even older hp laptop (with Windows Vista on it) does neither. On those laptops the printer software ran.
On the new laptop for my daughter it doesn't.
So.. I'm suspecting the problem does not lay in the printer software but in the c++ 2012 redistributable package.
Another difference is that my own laptop had an Intel processor. The one for my daughter has an AMD.
So I am convinced the problem must lay in the C++ 2012 package (maybe combined with the AMD processor? I don't know) and NOT the printer software.
Anyone got any ideas on what to do next?
If so, I thankfully await your answer.

HP OfficeJet J6410 won't install under Windows 8

Hello to you all,
Two days ago, I bought a new notebook for my daughter. She needs it for her study. It's the HP Pavilion TouchSmart 11-e000ed.
Again, just like the situation I wrote about before in this topic over here (link: http://h30434.www3.hp.com/t5/Printer-All-in-One-Install-Setup/Officet-J6410-won-t-install-under-Wind... the OfficeJet Printer J6410 won't install under Windows 8.
Now this is what I've done before the problem occured:
- I made a username and password for her,
- I activated Windows 8,
- I made a recovery-point,
- I took my external DVD writer, installed Office 2007 Home and Student for her (o.k, I know it's old, but it's very o.k - and legal copy -. for her study, used it myself as well and still do, and never any complaints about that one), and activated it,
After that and restarting the notebook;
- the notebeek activated USB 2.0 (it does that automatically at first use),
- installed XPS2OneNote (to use for Office OneNote 2007),
- installed SaveAsPDF&XPS,
- removed Norton Internet Security (I never use it, I use something else for that purpose, but was - and still am - planning to install that on a later moment),
- I made sure the notebook can access the server we have here at home, and made a share for her.
After that I used the OJ_AIO_J6400_Full_Win_WW_140_408.exe file (Dutch, but I'll translate the text in English).
From this point on I will describe as precisely as possible what happened
- - the program extracts some files, no problems there,
- - when the first screen appears, I pressed 'Install',
- - a bar appears, and after that another pop-up that says tha you must allow all HP processes. I pressed 'Next',
- - system is controlled, and after that one must agree with the licence agreements. I checked the box, and pressed 'Next',
- - the system is prepared for installation and - yes! - there it comes... an error message.
The error message says:
C:\users\<username of my daughter.\AppData\Local\Temp\7zS0FF0\Setup\de..
Please not that this is a different message than the one I got before, as I described in my posting before, (link again: http://h30434.www3.hp.com/t5/Printer-All-in-One-Install-Setup/Officet-J6410-won-t-install-under-Wind...
Nonehteless, I assumed that, as before, the problem was with the C+++, just like before. That is why I made the following steps:
- I used the OJ_AIO_J6400_140_408_Scrubber program, run L4 4 times.
- I looked for the KB2565063 update, but it isn't there anymore. So, instead, I ran all updates there are until the system said that there are no updates to be found,
- After that I took the old installation disk that came with the OfficeJet J6410 printer, and (tried to) ran hpsetup.exe. It doesn't do a thing! Literally!!
- after that I tried to run the the OJ_AIO_J6400_Full_Win_WW_140_408.exe file again. No success. I got the same error as before (see above, the ..\7zS0FF0\Setup\de.. thing again.
So, what to do now?
Anyone got some helpfull tips for me? I would really appreciate your feedback / help.
Thank you in advance,

Hi again,
No, it didn't work. And, the solution you offered neither.
This is what I've done.
After downloading the OJ_AIO_J6400_Full_Win_WW_140_408-4.exe file, I tried to install it.
It failed. I got an error message similar to the one before.
'C:\users\<username of my daughter.\AppData\Local\Temp\7zS57DB\Setup\de.'
I tried to ran the scrubber again, and the CCCUninstaller and tried again.
Same error message occured.
After that I tried to look for the KB2565063 file again. Found it this time and ran the vcredist_x64 file.
I rebooted the system, tried to run the OJ_AIO_J6400_Full_Win_WW_140_408-4.exe file again.
Same error message ocuured.
So, after that, I followed the steps you proposed.
Step 2 - searching for hpoins*.dat --> no results found.
Step 3 - searching for hpwins*.dat --> no results found.
Step 4 - I ran the Run Dialog box and typed MSIEXEC /REGSERVER (with AND without the extra space between ('MSIEXEC /REGSERVER') in the Dialog Box and pressed Ok.
Got an error message in Dutch:
'Kan het bestand MSIEXEC /REGSERVER niet vinden. Controleer of u de naam juist hebt ingevoerd en probeer het daarna opnieuw.
Translation: 'Can't find the file MSIEXEC /REGSERVER. Check if you typed the name correctly and try again'.
Step 5 - I ran the Run Dialog box and typed MSIEXEC /UNREGISTER (with AND without the extra space between ('MSIEXEC /UNREGISTER') in the Dialog Box and pressed Ok.
Got an error message in Dutch:
'Kan het bestand MSIEXEC /UNREGISTER niet vinden. Controleer of u de naam juist hebt ingevoerd en probeer het daarna opnieuw.
Translation: 'Can't find the file MSIEXEC /UNREGISTER. Check if you typed the name correctly and try again'.
So... conclusion: NOTHING worked.
My ideas for a possible solution didn't work, and neither did your ideas for a possible solution.
Reason why I want it to work is because of the HP Solution Center. If I can not install it with the software from the original installation disk, or the software that one can download from the HP site (the OJ_AIO_J6400_Full_Win_WW_140_408-4.exe file that is), than I have no HP Solution Center. That would be a pity, for I am sure my daughter would really love the use and ease of the program, and would really use it a lot for her study.
What's next? What else can I try to solve the problem?
Got any more idea's or helpful hints?
Thanks in advance,

How to install itune under Windows XP 64-bit professional with SP2?

I have iPhone 3GS for over a year and I have set it up at my work computer (Windows XP professional) with latest iTune and it work great. Recently our IT has upgraded our system and all of our new machines has Windows XP 64-bit OS.
I can't figure out how to install iTune under Windows XP 64-bit, to synch with my e-mail, contact and calendars any more?
Can any one help?

New machines? With XP 64-bit? Your IT department is being rather foolish, in my opinion, deploying new installations of XP 64 since Microsoft discontinued mainstream support for it (more than two years ago) and it's never really been satisfactory.
Anyway, there is no version of iTunes that supports the 64-bit version of Windows XP and almost certainly never will be. If you search the iTunes for Windows forums for "XP 64" you'll find threads describing the process some people have used to "crowbar" iTunes onto XP 64, with varying levels of success, none of them complete. Connecting to iPhones is one of the most problematic issues.
Regards.

Installing Orcale DB System under Windows

Similar Messages

Maybe you are looking for