Installing OS 9 and jaguar on Seagate hard drive I've just installed

I have just installed a seagate 120Gb ATA hard drive. I've configured it as 'slave' and initialised it. I want to install OS 9 on it and then jaguar. I have tiger on my master drive. Everytime I try to restart my computer on the slave using the OS 9.04 software install disc that originally came with my computer it refuses to load. I aim to install the OS 9.04 and use the updater I have on disc to update it to 9.1 and then install jaguar.
I recently updated the firmware when I installed a processer upgrade. Is this preventing the disc from installing 9.04? Or is there something else I should be doing?

Hi Alison,
Coming back to you about your queries:
So if I install OS 9.1 on the same drive as OS 10.2 I
don't need to partition?
No, you don't need to partition.
Or do I? If so, how big should I make each
partition?
If you still want to partition, then the relative sizes of the partitions depend on the total drive space available plus what you actually want to put on them. If you don't have to partition, I wouldn't, as it tends to lock away drive space (you can't save files across the drive volumes).
I have tiger on the other drive so that's not a
problem.
Yes, and you can still set up Clasic to boot up off the OS 9 that you will have installed in your other drive.
Hope this helps!
Cheers!
Karl

Similar Messages

  • HT201250 Macbook air and 1TB external seagate hard drive

    i just bought a 1tb seagate hard drive and set up time machine to my macbook air. so just to check i went back and opened iphoto from one of my backups and the iphoto library wouldnt open. does anyone know why and how do i access the pictures from my iphoto library on my exteranl hard drive.

    I didn't think that this would happen, so I never bother backing it up to another drive. I regret it I don't want to format it, I don't want to lose what's inside it. I wish there were another way? Please, help me!!!
    This is what I got from the disk utility -
    Disk Description: WD Elements 1023 Media
    Connection Bus: USB
    Connection Type: External
    Serial Number: 575873...
    Total Capacity: 500.11 GB
    Write Status: Read/Write
    SMART Status: Not Supported
    Partition Map Scheme: GUID Partition Table
    Mount: Point: Not Mounted
    Format: Mac OS Extended

  • Have a old macbook 2006 with newer 500 GB seagate Momentus hard drive. I took mac to apple store and they said logic board is bad. Can I purcase another used macbook and install my old seagate hard drive and have saved my information? Thanks for any imput

    Have a old macbook 2006 with newer 500 GB seagate Momentus hard drive. I did not backup any docs or pictures. The macbook crashed my fault. I took mac to apple store and they said logic board is bad. Can I purcase another used macbook and install my old seagate hard drive and have saved all my information? Thanks for any imput.

    mgott55 wrote:
    Can I install my used existing hard drive in a compatible macbook to save everything?
    If you need to extract the drive's content you can remove it and install it in a $10 USB enclosure. It will be readable by any recent Mac.

  • Windows XP won't install on a Bootcamp partition Following replacement program of 1TB Seagate Hard Drive

    Following 1TB Seagate hard drive replacement on a late 2009 machine running Mac OS X 10.6.8, bootcamp would not install windows XP on a disk partition. Now that this is upgraded from OS X 10.6.8 to Mavericks, is it possible to install windows XP on a bootcamp partition?

    Make sure your "Function Key" lock is on. Mine did the same thing. I Have a new Microsoft multimedia keyboard and F8 would not work until I hit the "Function Key" lock on the keyboard.
    Good Luck

  • HT201250 Circle and cross through iTunes icon afte the seagate hard drive replaced and restored data from time machine backup.

    Circle and cross through iTunes icon: had the seagate hard drive replaced and restored data from time machine backup. Why does the iTunes icon have a circle and cross through it? As though incomplete? tried everything and still Circle and cross through iTunes icon.

    No it isn't something you'd find on the computer, it has to be custom installed from the 10.6 installer disc or Software Update if it wasn't before.  It allows you to use older PowerPC applications on your Mac.   On the other hand double check the version of iTunes you have does not require 10.7 minimum either.

  • Permission problems in my newly installed hard drive from iMac 1 TB Seagate Hard Drive Replacement Program. Is that normal?

    Just got back my iMac with a brand new replacement hard drive through the iMac 1 TB Seagate Hard Drive Replacement Program. With only apps installed, no files and fonts added, the hard drive already shows permission problems. Is that normal? The replacement hard drive is a Seagate again, ST31000528BAS. Do people like their replacement hard drive?

    Just now looking at these... Last recall 2009 MacbookPro Video issues, I waited 4 years and it took 4 trips to apple store with video of the machine problems... Days and months past, finally with stern discussion with manager, got resolved. Now Drive recall on work machine... better take advantage now. IF IT AIN'T BROKE DON'T FIX IT!
    Should have thought of it... Have TM full back up... (will look into clone next time, now that I see this). Take in 27iMac running 10.6.8, 5-7 days, what a joke, my boss will be happy to pay for a week without working. Finally get, "if you have TM back up, 3 days." Get machine back with 10.6.3, hit the R recovery, click TM back up, runs for 2 hours, reboots, looks great. Box up take back to office... update to install - OH CRAP, still running 10.6.3. Updates crash with error on install, BUG PROBELM, nothing runs.
    Call Apple... after hours, tells me to boot using 10.6.2 disk, wipe, reinstall OS, udate to 10.6.8, THEN do the restore. GREAT! Only thing 10.6.2 DVD won't read... now back on phone... take back to the store, Genius says, "Oh, can't boot a newer system w/ old disk, that's why it won't read." PROMISES it'll be fixed, if you leave it over night... GREAT!
    Pick up next day, supposedly, booted to disk, wiped drive, reinstalled, updated to 10.6.8 and did the RIGHT restore... Looks GREAT... apps run and 10.6.8 OS. Back to the office... CRAP!! not running right... fonts messed up, drop box app needs new install, cocktail needs upgrade, Fetch not working, memorized paths gone... back ups locked out of permissions... ***!!
    4 hours on phone with apple and still not solved. Evidently... either different account names caused problems... and/or they never restored personal "settings". Seems there are 3 ways to restor... Running Migration Assistant, Restoring after they load a new OS... or NOW WAITING for them to send me a bootable 10.6.3 disk and then boot from disk, w/o installing OS and doing a restore from TM.
    Can begin to make enough stink!! So now can't back up without doing a full 400 GB back up and possibly destroying any good back ups... can't work, liek having hands tied behind back. WAITING for solution! TICKED OFF!!!

  • My Hybrid 1TB Seagate Hard Drive will not work in my data doubler caddy installed in the optical bay

    My Hybrid 1TB Seagate Hard Drive will not work in my data doubler caddy installed in the optical bay of my MacBook Pro

    Thanks for all the advice. It looks like I have finally got my MBP working again (after two weeks of pain).
    The WD HD works fine internally, but restoring from TM introduced a whole load more of issues/incompatabilities (see above). Eventually the only thing left was to re-build rather than restore:
    i) mount the WD disk internally and install Snow Lepoard from the orginial installation disks
    ii) get online, and after much trying download Lion (previously purchased). Perfrom all update.
    iii) Connect my Time Capsule, identify my data, photo and music files and then copy them accross by hand
    iv) install all the other applications (e.g. MS Office:mac, etc) from scratch.
    This exercise has shown me that even though tools and procedures exist to address separate issues, when the complexity of inter-dependence is introduced there are a raft of problems that crop up.
    Now I am back in business I will be using TM and CCC to take full and regular copies. I did this previously, which has saved me from losing my data and cherished pictures, but hopefully next time (and I'm sure there will be a next time) the recovery will be less infuriating.
    BTW I got a refund on the Seagate Momentus XT. They guy in the shop said it wasn't the first time he'd heard of this issue with MBPs. Great.

  • I just had the seagate hard drive replaced and the fan is running loud

    I just had the seagate hard drive replaced and the fan is running loud

    Is your iMac a late 2009 or newer model? Did Apple do the replacement or someone else? There is a documented issue where Apple changed the hard drive heat sensor from outside the drive to inside. If you install a replacement hard drive in a late 2009 or newer iMac that's not an Apple-sourced drive, two things happen ... the fan runs like crazy and the Apple hardware test doesn't work properly.
    You can read these OWCS blogs here and here on it. 

  • Can I purchase Mountain Lion and make a flash drive bootable? I do not want to install it on my Macbook Pro. I have Snow Leopard on my Macbook Pro now, and due to my hard drive needing repair I need to boot off of another source, like my flash drive.

    Can I purchase Mountain Lion and make a flash drive bootable? I do not want to install it on my Macbook Pro. I have Snow Leopard on my Macbook Pro now, and due to my hard drive needing repair, I need to boot off of another source, like my flash drive. I am in Paris and my Snow Leopard DVD is in Texas.

    Mac OS X has a built-in disk diagnostic and repair program called fsck or file system consistency check. Here’s how to verify and repair your startup disk with fsck.  As soon as you hear the startup tone, press and hold Command-S on the keyboard. Keep holding down those keys until you see a black screen with white lettering. This is called “booting into Single User Mode.”  As the Mac boots in this mode, the screen reports each step of the process. The line should end in root#.  Right after the root# prompt, enter the following: /sbin/fsck -fy
    If repairing the disk in single user mode fails, it means one of two things. Either your hard drive itself is failing (a hardware failure), or the directory damage on your hard drive is beyond the capability of the built-in repair procedures in OS X.

  • How to install an SSD in a MacBook Pro and keep the original hard drive

    Step by step instructions on how to install a Crucial SSD as the primary drive in a MacBook Pro and use the original hard drive as a second drive in place of the optical drive.
    Apart from the time needed to back up your data and clone the original drive to the new SSD, you should be able complete this in less than an hour. 

    Verifying
    Install the SSD in the HDD slot
    Install the HDD in the optical slot
    Boot to the HDD and format the SSD
    Boot using Command R and restore the operating system from Time machine to the SSD
    Reformat the HDD and restore the data files to it.

  • How can I force Time Machine to make a complete backup of my Hard Drive.  I just installed a new external drive for Backup since my previous one failed.  Now when I back up, Time Machine only backs up my data folder and the Users folder.

    How can I force Time Machine to make a complete backup of my Hard Drive.  I just installed a new external drive for Backup since my previous one failed.  Now when I back up, Time Machine only backs up my data folder and the Users folder.
    When I start a backup. Time Machine says "Oldest Backup: None; Latest Backup: None", so it seems like it should do a complete backup, but it only does a partial. 

    Hi I'd like to jump in here. Your app showed me this:
    Time Machine:
              Skip System Files: NO
              Mobile backups: OFF
              Auto backup: YES
              Volumes being backed up:
                        Macintosh HD: Disk size: 749.3 GB Disk used: 453.81 GB
              Destinations:
                        Plastic Wrapper [Local] (Last used)
                        Total size: 999.86 GB
                        Total number of backups: 64
                        Oldest backup: 2013-07-24 23:25:11 +0000
                        Last backup: 2013-11-17 01:40:47 +0000
                        Size of backup disk: Too small
                                  Backup size 999.86 GB < (Disk used 453.81 GB X 3)
              Time Machine details may not be accurate.
              All volumes being backed up may not be listed.
              /sbin excluded from backup!
              /usr excluded from backup!
              /System excluded from backup!
              /bin excluded from backup!
              /private excluded from backup!
              /Library excluded from backup!
              /Applications excluded from backup!
    Aside from the size of my backup drive, which I will increase at some point, I'd really like to have time machine backing up all system folders, especially Applications. How to I reset this hidden exclusions?
    Thanks,
    Darcy

  • How to install and reconfigure a new hard drive?

    How to install and reconfigure a new hard drive?
    I installed a new hard drive from best buy for my "vintage" MacBook laptop.  When I turned on the laptop and the flashing folder appeared, I need help?
    I looked online for some clues.  I put in the software disk I received when I bought the disk but I cannot select a destination volume to install the software.  I tired to partition the drive within disk utility but there was an input/output error.  Should I just plug in my external hard drive and hope everything reboots like magic ?
    Thank you for any help you can give

    How to replace or upgrade a drive in a laptop
    Step One: Repair the Hard Drive and Permissions
    Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger, Leopard or Snow Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    Step Two: Remove the old drive and install the new drive.  Place the old drive in an external USB enclosure.  You can buy one at OWC who is also a good vendor for drives.
    Step Three: Boot from the external drive.  Restart the computer and after the chime press and hold down the OPTION key until the boot manager appears.  Select the icon for the external drive then click on the downward pointing arrow button.
    Step Four: New Hard Drive Preparation
    1. Open Disk Utility in your Utilities folder.
    2. After DU loads select your new hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area.  If it does not say "Verified" then the drive is failing or has failed and will need replacing.  Otherwise, click on the Partition tab in the DU main window.
    3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID  then click on the OK button. Click on the Partition button and wait until the process has completed.
    4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
    5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
    6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
    Step Five: Clone the old drive to the new drive
    1. Open Disk Utility from the Utilities folder.
    2. Select the destination volume from the left side list.
    3. Click on the Restore tab in the DU main window.
    4. Check the box labeled Erase destination.
    5. Select the destination volume from the left side list and drag it to the Destination entry field.
    6. Select the source volume from the left side list and drag it to the Source entry field.
    7. Double-check you got it right, then click on the Restore button.
    Destination means the new internal drive. Source means the old external drive.
    Step Six: Open the Startup Disk preferences and select the new internal volume.  Click on the Restart button.  You should boot from the new drive.  Eject the external drive and disconnect it from the computer.

  • I Mini with an i7 processor. I would like to use Boot Camp to install windows based CAD software on my MAC. Would it be better to use a plugin external hard drive to load my software on and if so what hard drive would you recommend?

    I Mini with an i7 processor. I would like to use Boot Camp to install windows based CAD software on my MAC. Would it be better to use a plugin external hard drive to load my software on and if so what hard drive would you recommend?

    Thank you for your quick response. I can then use a ZIP drive for data storage. I want to keep as much of my hard drive free of data as possible.

  • After downloading and running program to install keeps saying file is corrupt. I have used this on computer before and had crash and am trying to reinstall. Have 2.? gh dual core processor with 4megs ram and a 320 gb hard drive using windows 7 64bit.

    After downloading and telling program to run it will not open the firefox install utility keeps saying file is corrupt. I had a computer crash and having to reinstall all of my programs. I have a 2.? Gh dual core processor running windows 7 64bit, which I had before, with 4 megs ram and a 320 gb hard drive so I know I have the system requirements.
    == This happened ==
    Every time Firefox opened
    == today 5/24/10 ==
    == User Agent ==
    Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; Win64; x64; Trident/4.0; .NET CLR 2.0.50727; SLCC2; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0)

    This can be caused by anti-virus software/ real time scanners. Please try to disable your anti-virus software real time scanner and try again. Do not forget to enable it after the download is complete!'
    See http://kb.mozillazine.org/Unable_to_save_or_download_files (Disable virus scanning in Firefox preferences - Windows)

  • What is largest solid state drive I can install in MacBook Pro 8,2?  I want to perform a clean install of Mavricks and dump my old hard drive.

    What is largest solid state drive I can install in MacBook Pro 8,2?  I want to perform a clean install of Mavricks and dump my old hard drive.

    If the bank account permits, I suggest getting a 1 TB SSD anyway.  One cannot have too much storage. 
    Unless you are having issues with your current installation, a 'clean' install is not necessary.  It would be more efficient to clone your current drive to the new SSD, test it, and then do the swap.  The installation of Mavericks over Snow Leopard can be done either before or after the cloning process.
    Ciao.

Maybe you are looking for