Installing OS X on a new hard drive taking way too long?

I switched out my old 250 GB hard drive that shipped with my MacBook Pro for a new 640 GB WesternDigit drive. I'm trying to use a Mavericks installer USB to install on my newly formatted hard drive, but it's taking way too long - I mean, I left it going overnight (about 7.5 hours), and when I came down, it wasn't even half done. Is there anything I can do here? I'd like to use my laptop. Thank you very much for any suggestions.

Do you have a internet connection? Even with a USB installer that if good and functioning properly you need an internet connection to Authenticate the install with your Apple ID.
If your old drive is still functioning you can connect it to your Mac with a SATA to USB adapter and use the Recovery HD on that original drive to reinstall Mavericks on the new drive.
If the drive is no longer functioning and you have no way of getting to the Apple internet download for Mavericks then you will need to start with an install of the original version of OS X that came on your Mac when new then update and or upgrade to Snow Leopard 10.6.8 and then use the Mac App Store to reinstall Mavericks. There is not other way to do this. So save yourself some time and trouble and start fresh.
If your original drive is still functioning and it had Mavericks installed on it you can also CLONE that drive to the new one once you connect it to your mac with some type of SATA to USB adapter or enclosure.
If the Mavericks USB installer you have was made from a Mac that came with Mavericks pre-installed on it that will not work on your Mac.

Similar Messages

How can I re-install CS2 upgrade on a new hard drive without serial no. of previous Photoshop 5?

A new hard drive has been installed on my G4 Mac with OS10.4. I am trying to re-install CS2 Premium on the new hard drive but I no longer have the serial number of my previous Photoshop 5. I need to enter this as the CS2 was an upgrade. I have spoken to Adobe technical support but they no longer support CS2 so are not able to help. They recommended that I try the Adbe Forum. All my Adobe products have been bought legitimately. I know people manage to use pirated Adobe software so there must be some way for me to activate a legally bought product.

Michael
Thank you for your email and suggestion.
I have tried that and the only product listed is my CS5 Design Premium (which was an upgrade), none of my previous Adobe products are listed.
I am now looking to see if I can buy an old version of Photoshop that will work on a Power PC G4 Mac with OS 10.4.
I only need Photoshop on that Mac to paint from, not the rest of the Suite.
It is infuriating that I already have a legitimately bought Adobe product (as all mine have been) but I am unable to use it.
Regards
Trevor

Installing OS X on a NEW hard drive

I just installed a new hard drive on the macbook pro. however, when i run the installation disk it never actually installes os x instead it trys to install the applications, but cant find the drive. How do I install OS X on a new hard drive? Thanks.

Hello,
The first thing you need to do is partition and format the drive.
From the OS X installation screen, go up to the menus at the top, and locate Disk Utility.
Launch Disk Utility.
Now, select your hard drive on the left.
Then, click on the Partitions Tab.
Now, choose the single partition option (unless you want to divide the drive for some reason). Then, give it a name.
Choose the format "Mac OS X Extended (Journaled).
Now, click on the button to partition the drive.
When it's done, exit Disk Utility.
Now, proceed with the installation. If it still won't see the hard drive, then re-start from the installation disk again and try it again. It should see the hard drive now and permit you to install on it.
I hope this helps.
Let us know if you have other questions.
P.S., if you'd like, go ahead and click the "Helpful" or "Solved" buttons on any of the posts / replies above if you feel they were helpful or adequately answered your question.

How to install Windows XP on a new hard drive in desktop computer

Have a Lenovo desktop. I replaced the defective hard drive. Obtained Windows XP installation disks from Lenovo. I received recovery two
Recovery CDs, namely Rescue and Recovery CD and Product Recovery CD along with 5 CD Roms ( 1of 5 through 5of 5).
I want to install Windows XP in my new Hitachi hard drive. Should I use only the 5 CD ROMS 1 thru 5, leaving out the Recovery and Rescue CD
and Product Recovery CD Rom.
How to I install Window XP in my new hard drive? I am not a computer
wizard. As a retired IBM senior citizen I need some help from the community. I am not cognizant with the steps to follow. I am a new
member of this great community.
Thanks a bunch ! padman
personal informations removed for your own security

padman215, welcome to the forum,
you need to boot from the Rescue and Recovery cd and select to recover the system and then to recover to factory state. It will then eventually ask for the other discs.
Please be sure that you read the messages carefully; if it asks for a supplementary disc, (which you don't seem to have), you need to click on "no" should it ask for one - this throws alot of people.
Happy installing
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog

Trouble installing 10.4 on a new hard drive

My hard drive died, so I'm trying to install 10.4 on a new hard drive. I'm using the same disk that came with my laptop. I get as far as "select a destination" and the hard drive doesn't show up to choose. I saw another post that suggested partitioning the hard drive first, so I did that, and still no luck. Can anyone help?

Thanks for the welcome, and for the attempt to help. I'm starting to wonder if I got a bum replacement hard drive? I've just restarted twice, it now takes FOREVER for the apple and the little spinny thing to show up when I start up and hold down the C key, and now when I go to disk utility the hard drive doesn't show up in the list of choices at all. Do you think it's worth pulling out the hard drive and sticking it back in again? I have no idea if that will make any difference?

Need Help Installing an OS on a new Hard Drive

H, I just installed a new Hard Drive on my G4. My problem is I cannot find the original G4 install discs.
I do have OSX Panther discs which I bought later. Can I use these to install a new OS?
How would I do this as the new Hard Drive is brand new and probably not formatted? Do I power up the mac and load the Panther install disc 1 or is this not the correct procedure?
Also I have an external LaCie CD drive because the one in the mac doesn't work. Will the external LaCie CD drive be recognized when I put the OSX Panther discs in it to install an OS on my new Hard Drive?
Sorry for so many questions but I don't want to mess this up.
Thanks

Thanks for replying Thomas. Well my G4 Hard Drive was shot so I took it out and installed a new one so I have to reinstall everything (new OS & all applications). I tried to use Super Duper to Clone the HD but the HD was too far gone, so now I need to install an OS on the new Hard Drive.
I can't find my original G4 install cd's. I do have Panther OS discs and an iLife disc I bought awhile back. Can I use these instead of the original G4 install disc?
Here's the process to install a new OS as I understand it. Please correct me if I am wrong or am missing a step.
1) Put the first Panther install disc in the cd tray.
2) Power up the G4 while holding down the "C" key
3) Follow the installation instructions
Thanks!

I'm having to re-install PSE 11 on a new hard Drive. I clicked the installer and it ran, but says it's missing the .exe file. I then downloaded PSE 11 from your website and when I unzipped it and ran it, it wanted to uninstall PSE 11. Now I'm contactin

I'm having to re-install PSE 11 on a new hard Drive. I clicked the installer and it ran, but says it's missing the .exe file. I then downloaded PSE 11 from your website and when I unzipped it and ran it, it wanted to uninstall PSE 11. Now I'm contacting you

Okay, so, fast forward from July to now -
- I've visited my closest Apple store's genius bar twice now. (Over an hour and a half away.)
- My computer spent at least 8 hours behind their closed doors in the workshop
- Several complete erases of the harddrive have taken place
- Most of the Apple geniuses I dealt with were nice and very knowledgeable, but they were and still aren't 100% sure exactly what is wrong with my computer.
The good news is:
- They were able to at least get it running again, with a clean install from their servers of OS X Lion 10.7.5
- They believe that my problems stem from either 1 of 2 things:
- Faulty Hard Drive (even though it is brand new)
- The wrong build of software being installed.
Now, while the wrong build does seem like it could be the problem, it doesn't make sense in the aspect that all of the initial problems began when the first hard drive failed. The same problems continued when I changed out the failed hard drive with the brand spanking new one, and only slightly improved when I was able to successfully install the OS that came with the original disks for my computer. I'm not convinced this thing is back to normal, but hopefully I can make it last through getting a shiny new retina Macbook Pro in the coming future. Thank you so much to everyone who read and replied to this post!
- Andrew =)

Need to re-install CS5.5 on my new hard drive. Serial number from disk package not working.

I need to re-install CS5.5 on my new hard drive. Serial number from disk package not working.

if there's a problem with the number of installations, you'll see a message about an excess activation problem.
if that's what you're seeing, contact adobe support for an activation count reset, https://helpx.adobe.com/contact.html
otherwise, attach a screenshot of the error message or quote it.

I have adobe CS6 on my old hard drive and i wish to transfer it over to my new hard drive. I no longer have the disc which it came on. How do I do this? also i have only ever put a single copy on a laptop and it is alowed 2........if that matters.

I have adobe CS6 on my old hard drive and i wish to transfer it over to my new hard drive. I no longer have the disc which it came on. How do I do this? also i have only ever put a single copy on a laptop and it is alowed 2........if that matters.

deactivate (help>deactivate) on your old hd.
then install using the installation file(s) and your serial number.
Downloadable installation files available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 |12 | 11, 10 | 9, 8, 7
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7
Lightroom: 5.7.1| 5 | 4 | 3 | 2.7(win),2.7(mac)
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.
window using the Lightroom 3 link to see those 'Important Instructions'.

Cannot Install OS 8.1 on new hard drive, 233 G3 Powerbook

Ok, so here's the deal.
I have an old Powerbook G3 Wallstreet. 233 Mhz 13" screen.
I recently ran into a problem where I booted up, and the hard drive (original 2GB) was erased. Completely reinstalled, and as soon as it rebooted after the install, the hard drive was empty again. Weird.
So, I decide to reinstall OS8 on a new hard drive. I have an older 20 GB drive from a compaq Armada M700, which I had replaced with a newer 120 GB drive, so I used that in the Powerbook.
Anyway, I've tried lots of things. Fully empty nonpartitioned drive, single 8GB partition by using MacDisk in windows, multiple 8GB partions, what have you. Disk Setup does not see any hard drive I place in the powerbook. I tried both the 120 and the 20 GB.
Any suggestions? I only have a Windows machine to work with, as the G3 is my only Mac. (Well, I have a graphite iMac, but it's suffering from the screen shrinking/power down problem common to those units, so I can't really do anything with it.)

ShatteredOne,
When you have installed the OS and restarted, did you get the blinking '?' alternating with a folder? If so, try resetting the PRAM to possibly correct this issue.
http://docs.info.apple.com/article.html?artnum=2238
Will the Wallstreet boot to the MacOS 8.1 CD? If so, try Drive Setup on the 8.1 CD again after resetting the PRAM.
The original Wallstreet shipped with a special OS 8.1 CD (green label) since the retail MacOS 8.1 CD will not have the necessary Powerbook G3 enabler file.
You do not have to partition the HD, but just make sure you are have formatted as HFS Extended although HFS Standard will work. However, on a large drive like the 120GB, you will have a lot of wasted space due to the block size.
If still having problems, install the original 2GB HD > boot to the 8.1 CD > open the utilities folder on the CD > Drive Setup and select 'zero all data' when you initialize; now run the Test Disk test and see if it passes. If it fails, zero/test one more time.

Follow up to HD crash - Install disk can't see new Hard Drive !!!

I may have a bigger problem on my hands.
I rebooted with my original install disk of OS X and when it gets to the "choose location" window, it does not see the new hard drive......????
I'm thinking about re-checking connections and/or possibly pull the hard drive out and do an external connection just to verify that it spins.
Not sure how to proceed and/or what to check ?? Suggestions ???

Make sure you chose the right format, and as far as partitioning in concerned, you have to select at least one partition, which will be the entire drive.

I need help re-installing my OS on a new hard drive. Having MAJOR issues with this simple task.

I have a MacBook Pro 15" (mid 2009) I recently needed to get a new hard drive for it, the old one stopped working. It came with OS X Snow Leopard already installed from Apple, and it also came with the install disks. I have booted up using the install disks and put OS X Snow Leopard back on the computer.
I tried booting with a USB install disk of OS X Lion (10.7) but had no luck on multiple occasions. It would only get through the initial step of the install and then say it couldn't download additional components needed for OS X
So finally, I decided to try a full erase and reformat of my brand new hard drive (less than a week old) and stated with the basic software that came with the computer. Installing that worked fine, until I tried to do a software update through the built in program. My computer refused to download 10.6.8 from the apple servers, so I had to find it on a 3rd party website. Once I found it and downloaded it, I finally got it installed. There were 12 more updates after I did 10.6.8 and none of them worked when I tried downloading and installing as a group. I had to do each one individually, the last one being a security update.
Up to this point, the Mac App Store didn't work (even after the 10.6.8 update), I couldn't download any of my previous purchases. I needed to download lion, to see if having it on the Mac hard drive itself would help with the install, but I couldn't do that until after the security update.
Other than that, the Mac worked normally except for during each start up, the apple logo would flash along with the forbidden sign and the folder with a question mark on it. It flashed for a few seconds randomly, then would boot up normally or say that my computer would need to be restarted.i figured this issue would be fixed after I successfully installed lion.
FINALLY I got the App Store to download lion, and began the install process. Halfway through the install, it failed and when I tried to restart the computer, it continuously flashes through those three symbols at startup. I can't get it to do anything else. I'm so ****** off I'm ready to just sell it for parts.
My questions are:
      1. Can I install OS X Lion OR OS X Mountain Lion clean from the start after a full format of the hard drive?
      2. How do I go about installing clean and get my computer to stop flashing those symbols during start up?
*I have performed the Apple Hardware extended test and all systems are reporting normal function*

Okay, so, fast forward from July to now -
- I've visited my closest Apple store's genius bar twice now. (Over an hour and a half away.)
- My computer spent at least 8 hours behind their closed doors in the workshop
- Several complete erases of the harddrive have taken place
- Most of the Apple geniuses I dealt with were nice and very knowledgeable, but they were and still aren't 100% sure exactly what is wrong with my computer.
The good news is:
- They were able to at least get it running again, with a clean install from their servers of OS X Lion 10.7.5
- They believe that my problems stem from either 1 of 2 things:
        - Faulty Hard Drive (even though it is brand new)
         - The wrong build of software being installed.
Now, while the wrong build does seem like it could be the problem, it doesn't make sense in the aspect that all of the initial problems began when the first hard drive failed. The same problems continued when I changed out the failed hard drive with the brand spanking new one, and only slightly improved when I was able to successfully install the OS that came with the original disks for my computer. I'm not convinced this thing is back to normal, but hopefully I can make it last through getting a shiny new retina Macbook Pro in the coming future. Thank you so much to everyone who read and replied to this post!
- Andrew =)

Why am I not able to install snow leopard on a new hard drive for my macbook pro, which at one point was upgraded to Lion?

I've just had my hard drive go caput and after purchasing a new one was inclined to install snow leopard but received an error message when attempting to do so.
I did not create a back up or restore file before I decided to upgrade from snow leopard.
I'm wondering why am I not able to simply install snow leopard on a brand new hard drive. What would clue it into me having had ran lion before and why can't I simply delete that kernel or said file. It makes completely no sense to me. I come from a pc world where if I choose to format a hard drive, I can do a clean install of whatever OS I choose. After all I only paid for my laptop as should be able to do with it what I wish.
Any suggestions or insight would be greatly appreciated

1. Was Lion on the machine and trying to downgrade?
2. If so this might be an issue. Newer machines are done for current OSX.
3. If you have Lion on your machine try to install Snow Leopard on another partition or portable HD
4. After you format and install SL on the other partition or drive Try to boot from this machine retarting and holding the Option key at boot up.
5. See if that work.
This is a trial and error way but Mountain Lion is right around the corner and Snow Leopard is 2+ yrs old.
Brian

Can't install OS 10.4 on new hard drive

I installed a new WD 320Gb hard drive in our PowerBook G4 today but can't load the os. I connected the G4 as a target to another mac and partitioned the new drive and erased it with zero. Everything looks good there but . . . the g4 wont recognize the original installation disk. If I just reboot and hold the c key, the computer gets hung up on a blue screen. If I reboot holding down the option key, the disk appears along with apple hardware test (which when run says that it doesn't support this machine). Also, I tried using the installation disk for a new mac mini (ox 10.5) That get's me to the choose language screen but then says it can't load the os. I can then get to the disk utility which sees the new hard drive and it appears to be configured properly.
thoughts?

are the install disks that come with the computer limited to that specific computer? We have 2 powerbook G4s (a 15 and a 17 inch) The 15inch is giving me the trouble. It's possible that I grabbed the install disk for the 17inch.
Never used the disks before. When I insert the disk, reboot and hold the c key, the computer eventually goes to a solid blue screen without anything on it and stops.
As an experiment, I inserted the install disk in the 15, then attached the 15 to the 17 as a target. Teh 15 mounted on the 17 with the install disk mounting. I then drilled down through the install files until I go to the os install package and double clicked. It started to install but after about an hour it ended with an error message.

Having problems installing PE 2.0 on new hard drive

I'm having problems as I stated. I'm running Windows 7 Ultimate 64bit and had PE 2.0 on the last hard drive. This is a new hard drive, the welcome screen appears, I get the accept license screen and then the installation screen. As soon as I click install Photoshop Elements 2.0, the DVD-ROM drive spins down and stops. I tried using compatibility mode with no success either. I know there are more P E's out there. I own PE 12 too and I want to put 2.0 on the drive for simple things before putting on PE 12.
Any help would be appreciated!

How big is your new hard drive?
If it's not over 1 TB, then try copying the contents of the cd to to your hard drive and then in the Adobe Photoshop Elements folder, right click
on the Setup.exe and choose Run as Administrator
Also, turn off the real time scanning for your virus scanner before installing, just make sure your disconnected from the
internet and don't forget to turn your your virus scanning back on after installing pse 2.

Installing OS X on a new hard drive taking way too long?

Similar Messages

Maybe you are looking for