Installing OS X on older laptop via Target Disk Mode.

I've got a PowerBook G4 15" with a broken optical drive. It only has OS X 10.2 and OS 9, so we wish it could have tiger. I was wondering if I could use my macbook and a firewire cable with the powerbook to install from target disk mode.

Ah, so you mean use the MacBook as, essentially, an external DVD drive? Good idea; I was getting dismayed as the only PPC macs I have around are
-an iBook G3 with the entire top half ripped off (works though, great media center through VNC)
-the aforementioned Titatium powerbook 15"
-a smaller Aluminum powerbook 12" with a working DVD drive, but there's a DVD that refuses to eject inside it. It reads fine, but the case survived a mighty fall (before it was ours) so it can't eject.

Similar Messages

Is it possible to install OSX on another computer via Target disk mode?

Hey there...
a friend of mine has an older iBook. the drive on this iBook is broken (snapped off) so there's no way of using it.
is it possible to install OS Panther from another computer (use OS X panther install running on a MacBook, or G4) targeting the iBook via Target Disk mode?
thanks!
-

Hello Again SCHPiLKAS!
As roam posted, you cannot use the Intel MacBook install discs, on the PPC iBook.
Additional info in these links.
Using OS X Install CDs/DVDs On Multiple Macs
What's A Computer Specific Mac OS X Release
Software Update, Upgrade: What's The Difference?
If the iBook meets the Panther System Requirements, and the Additional Panther System Requirements, and you have a Full Retail Version, of the Panther Install CDs, you can use Firewire Target Disk Mode, to install the system.
The Panther discs should look, exactly like the images in the above links, and not say Upgrade, CPU Drop-in DVD, or "This software is part of a hardware bundle purchase - not to be sold seperately." on them.
ali b

Need Help Installing Snow Leopard onto a blank HD via Target Disk Mode

Hey everyone.
Recently I had the HD on my Black Macbook crash due to a mechanical failure. I have just purchased a new Hard Drive for my Macbook. It is completely blank other than the fact that I connected it to my girlfriend's White Macbook earlier today to create 2 partitions. I have a new copy of Snow Leopard that I want to install on it and was hoping someone could guide me through the process.
What I have with me as of now is:
One Black Macbook (UK bought) w/ Partitioned Blank HD and a non-functional Superdrive
One White Macbook (US bought) running Tiger w/ working Superdrive that mounts the SL DVD
FireWire Cable
New Snow Leopard DVD
My first attempt at this failed. I connected the two Macs with the FW cable and started up the Black Macbook in Target Disk mode. Both my HD partitions showed up on the White Macbook. I inserted the SL DVD into the White Macbook and when it mounted I clicked on install. Of course, now it thinks that I want to install SL on the White Macbook whereas I want to install it on the Black Macbook.
I'm a college student without a working computer and with my finals coming up, I'm in deep trouble. I want to mention that my Black Macbook's Superdrive spits out _everything except for Movie DVDs and My Leopard Startup Disk._ It spins the SL DVD for a few seconds and spits it out as well. I'm wondering whether this might be an issue with the DVD region code on the SL DVD though I don't think that's it. My region code is currently set to Region 1 (US) where I purchased the Snow Leopard DVD off Amazon. I initially thought there was a problem with the DVD and CD lens in the drive and I bought a DVD/CD Lens Cleaner CD but I can't run it because the Superdrive spits that out too. I'm out of warranty on the Black Macbook so fixing the Superdrive is pretty much out of the question. I was under the impression that I would be able to install SL via Target Disk Mode without any hassles but boy was I ever so wrong.
Is there any way that I can do this? I'm hoping someone here can help me out. Please do if you find the time to.

By other computer, do you mean the White Macbook? So I should basically put the SL DVD in the White Macbook, restart with the C key held down? Is that right?
Please pardon me if I'm being stupid.

Help: Windows XP on MacBook Pro Boot Camp Partition via Target Disk Mode

Firstly, let me lay out my situation. I have an old MacBook Pro (2,2) with a broken disk drive. It was dropped in its youth and can no longer read from or write to CDs or DVDs of any kind. I have just recently bought a new MacBook Pro to replace it (6,2) and am currently trying to convert the old computer into an XP machine through Boot Camp. I'd like to be able to do so without having to buy an external disk drive.
After a clean install of OS X (10.6.3) onto the old machine, I successfully partition 85GB of space (although I previously attempted the same with a 32GB file system to no avail as well) for XP to be installed upon. Because I cannot boot my XP install disk directly from the broken disk drive, I then close Boot Camp Assistant and shut down the computer. I start it up in Target Disk Mode to be accessed from the new MacBook (6,2).
Once the old MacBook is connected, I insert my XP install disk into the new MacBook (6,2) and boot from the disk. After allowing the XP (Professional) boot to load the install files, I arrow-key down to my 85GB partition (FAT32, named standard as "BOOTCAMP") on the old MacBook (2,2)'s hard drive and select it as the partition I would like to install to. This is where I am directed to a new boot window that tells me in a series of paragraphs that the XP installer cannot reach the selected partition for what seems to be a number of reasons. What it seems to be trying to say to me is that it cannot do a remote install of XP on a Target Disk Mode-connected machine, while not "knowing" that I am trying to do so. It's a similar message to the one that Boot Camp Assistant shows when one tries to create a Boot Camp partition on a machine that is being accessed via Target Disk Mode (Apple puts it much more clearly than Microsoft).
I'd be perfectly content, albiet slightly vexed, to conclude here that it is not possible, shuttle over to the nearest Best Buy, and purchase an external disk drive if it weren't for one thing: I tried the same thing two weeks ago with Ubuntu 10.10 and it installed perfectly on the Boot Camp partition I had created then (I have since wiped all and installed OS X cleanly on the laptop).
Here comes the point/questions:
If the Ubuntu boot disk can access the partition, why can't the XP boot disk?
Is there some way to convince the boot system that the drive is local, rather than being accessed via Target Disk Mode?
Is there an easy solution that doesn't even require that, and will allow me to install to the disk over a firewire connection?
If anyone's knowledgeable and/or brave enough to tackle this one, I'll be eternally grateful. Heck, I'll be grateful if anyone even attempts to tackle it.
Thanks,
-Alec Page

Windows XP will only install from the optical drive. Target Disk Mode does not work with Windows volumes. Windows will not install from any external device.

Installing Leopard from a PowerPC mac to an Intel mac via Target Disk mode

I've just purchased Leopard, but thanks to the common and very annoying faulty MacBook Pro disk drive, I cannot even read the DVD, much less install from it. Before, the disk drive error never affected purchased DVDs, only the ability to read and burn to empty DVDs, but now, apparently, I can't even read Apples own disks.
As the new system disk is Universal, would it be possible to start the installer form the cd on my sister's PowerPC mac (12' Powerbook), and install the system on my MacBook Pro's harddrive, mounted as a firewire drive, or would the installer automatically choose the PowerPC version, since it is launched on a PowerPC computer?
And, if so, is there any way to tell the installer to install the Intel version of Leopard if I run it on a PowerPC computer?

well, looks like I'll have to install Leopard through the Firewire Target Disk mode as my MacBook can't read the DVD. I would appreciate if someone could review the steps below to let me know if I am on the right track. The MacBook is the computer on which I want to load 10.5 and the iMac G5 (PowerPC chip) is the computer on which I will insert the DVD.
- First question: Am I correct (see above) in saying that the MacBook is the Target computer?
- Insert DVD in Host computer
- Connect Target to Host using FW cable
- Turn on Target computer press and hold T to launch in target mode
- select DVD drive from disk options
- this is where I get fuzzy, would I simply click the Install icon? And then what? Will the MacBook know to reboot in Target Mode or do I have to hold down T again?
- anything else I am missing?
Thanks.

Unable to recognize computers via target disk mode

I am trying to transfer files from my iBook G4 to my new intel-based iMac. I have successfully engaged my iBook in target disk mode (i.e. the firewire symbol moving around the screen) but my iMac does not recognize that the iBook is in target disk mode. I have tried adjusting the timing of target disk mode and connecting the firewire cable between the computers but nothing works. I have tried reversing roles and putting the iMac in target disk mode while trying to connect from my iBook G4 but I cannot establish a connection that way either.
I know the firewire ports on both computers function because I am able to connect to other peripherals via firewire. I am going back to the Apple Store today to get a replacement firewire cable just to make sure that isn't the issue. Does anyone have any ideas about what could be causing this issue or how to resolve it?
Both my laptop and iMac are running Mac OS X (10.4.10).
Thanks.
-David

Welcome to Apple Discussions
Have a look at all the other threads on the subject in the link below!
"Target Mode Search"
As you read up on the subject, notice that it is not wise to move software App's from the old system to the new.

Backup w/ Time Machine via Target Disk Mode?

So here's my situation, my computer is stuck on the grey screen of death, but it mounts fine in Target Disk Mode. Its been about 2 weeks since my last Time Machine backup, so I would like to recover the last two weeks of files. If I can do that, then I'll just wipe the HD and start with a fresh install, however, since I can't get it to start up, is it possible to backup my computer to my Time Machine backup using Target Disk Mode through my wife's computer? Any help is appreciated.
(If not, then is it possible to run a time machine backup from single user mode?)
Here's basically what I'm talking about:
MBP (Target Disk Mode) > Wife's MacBook > External HD (Time Machine Backup)

That may work, but you'll get a whole new, full backup, identified as belonging to the MacBook (since that's where TM would run, and the MBP would look like an external HD.) Unless you exclude it, you'd also get the internal HD on the MacBook. So it will require a lot of space and time.
There's no way to fool it into making an incremental backup.
Or, use the same setup, but make a "clone" on a separate HD or partition, via the Restore tab of DIsk Utility, or one of the "cloning" apps: CarbonCopyCloner or SuperDuper.

Can't Connect to Laptop in Target Disk Mode

I start my MacBook Pro (OSX 10.8.5) in Target Disk Mode, and connect to my iMac (OSX 10.9.4) with an ethernet cable, I am NOT able to see the MacBook Pro on my iMac desktop. I need mount the hard disk onto the desktop in order to do a SuperDuper backup.
I know the ethernet cable is connecting, because I can start the MacBook Pro normally, turn on file sharing, and then I can see files and folders from the iMac.
Why can't I mount the MacBook Pro in Target Disk Mode?

OK thanks.
My iMac has Thunderbolt, my MacBook Pro (17" vintage 2010) has Firewire. I assume then that there is no way to directly connect one to the other using Target Disk Mode, correct? Any other solution?

Unable to Install via Firewire Target Disk Mode

I'm having problems with installing Leopard 10.5 via Target Disk Mode. The 2 Macs I am using are a eMac 1.0GHz with 1GB RAM Running OS X 10.4.11 and a PowerMac QuickSilver 933MHz 896MB RAM Running OS X Server 10.4.11.
The eMac's Combo Drive has gone south and won't read DVDs so I am putting the install DVD into the QuickSilver. If I start the QuickSilver in Target Mode I only see the QuickSilver's harddrive on the eMac and can't access the install DVD. If I put the eMac in Target Mode and boot up the QuickSilver using the Install DVD after I get through the language selection it says the QuickSilver isn't capable of installing it.
Any suggestions would be helpful.
Thanks

Then, you're out of luck if the QS can't run Leopard. My G4 does. You might look at
http://www.macosxhints.com/article.php?story=20071214143723301
http://www.tidbits.com/webx?14@@.3cb6ddd5/5 and
http://forums.macrumors.com/showthread.php?t=371302
to see how you can work around it. Alternatively, use another machine or ext burner to boot the eMac with the DVD. With the QS in TDM, only the master disk is available.

How-To: Install Bundled Apps to another MacBook Pro using Target Disk Mode

Recently, I replaced the dead hard drive on my wife's computer. All the data was previously backed-up so all I needed to do was reinstall the original OS. Oops! Those disks disappeared over two years ago...perfect, right? No poblem, I already had the boxed install DVD for Snow Leopard and installed the core OS. But what about those bundled applications? Aha! That is the marketing coup Apple doesn't really talk much about. You see, you get the entire suite of Apple branded apps with the original install disks but not with a boxed OS install disk. It's just something that you have to find out for yourself...the hard way.
My requirement: restore all the iPhoto data to the reimaged machine running Snow Leopard. But that data has no application that can read it. Solution - Reinstall iPhoto from another source.
So I developed this workaround I hope the rest of you find amusingly simple, wildly helpful
Here's how I restored iPhoto on my wife's computer:
1) Get two Laptops side by side. In our case we both have macbook pro 2008 computers (Wife's and Mine)
2) Power both down and direct connect a firewire 400 cable (or 800 if you have it) between the two
3) Start the Wife's laptop in Target Disk Mode: Press "T" immediately after engagin the power button, hold it down until you see the "fanned" firewire symbol floating across a grey screen - it's quite large, about the size of your hand making a "stop" gesture
4) No start the Mine laptop by pressing the "option" key (two keys to the left of the space bar)
5) You will presented with a pair of hard disks to boot from, choose the Wife's laptop hard drive
5a) you'll notice now that the Mine laptop is booting the OS system files of the Wife's laptop (Her desktop, her preferences, etc...)
6) On the Mine laptop, insert the original Mac OS Install Disk (#1) that came with the Mine laptop (usually any OEM install disk will work, though)
7) Double-click on the DVD icon on the desktop when it mounts and look for a shortcut that reads, "Install Bundled Applications Only"...launch it
8) Now choose install bundled applications but make sure to press the "Customize" button in order to specifically choose which OEM software you want. In our case, just iPhoto
9) Follow the installer prompts all the through to completion and exit (you will be prompted to insert disk #2 along the way).
10) Remove the install disks, power down
11) Power down the Wife's laptop too
12) Disconnect the Firewire cables from both laptops
13) Power up the Wife's laptop normally
14) Launch the FInder and drill down to Applications. Look for iPhoto and launch it
15) iPhoto will either pickup the "iPhoto Library" that was previously restored after reimaging with Snow Leopard or you may be prompted to manually associate a library with iPhoto.
16) Once complete, you'll se all the restored pictures and data from when before the original hard drive crashed. Wife will be pleased and you'll look like a Genius
This is a really handy trick for troubleshooting a lot of install and restore related issues.
Hopefully you'll find other uses for it too.
Good Luck,
TheHighSierras

I think the problem is that you can't install an older OS X version onto a system running a newer OS X version. So I would try the following:
     1. have an external disk or create another partition on an internal drive to use for the Mountain Lion install (you might have to shrink an existing partition to make room for another)
     2. Create an external bootable USB thumb drive with the Mountain Lion OS on it (do a search on the web for this - for example see http://www.macworld.com/article/1167857/how_to_make_a_bootable_mountain_lion_ins tall_drive.html
     3. Reboot Yosemite and then boot from the USB thumb drive by holding down the option key
     4. run the mountain lion installer and install on the new disk/partition you created in step 1 - it will also create another recovery partition from this same part of the disk
Now your Mac system will have both a Mountain Lion install as well as the Yosemite install. You won't be able to use Migration Assistant to move things from Yosemite to Mountain Lion because it will see that you're "going backwards" and won't allow you to.
Have a good backup of everything before starting in case there are problems.
Good luck...

Installing in Firewire Target Disk mode

I know this is a kind of silly question, but is it advisable to install OS X on my iMac when it's booted into Firewire Target disk mode? I mean, would it get funky stuff in there that the iMac doesn't need if i install from, say, my PowerMac? I know it's quite possible to do this, as I used to do it when I had two identical iMacs. But those were, of course, identical, so the target machine had the same specs as the one that was installing.
Any thoughts?
Oh, and let me say a quick "hi" to all the regulars. I haven't really been on this baord too much the past year or so. Who's still around?

Hi, Trey.
I installed Tiger via Target Disk Mode, but my G3 has been having kernel panics in the couple weeks since the upgrade. On another post someone said that they'd heard that the Target Disc Mode can be a problem. So I'm checking the posts to find out more.
My G3 has a CD-R/W drive, so I didn't have an alternative, other than to buy an external drive, or to send Apple my commercial Tiger DVDs and pay them MORE to convert it to CDs. I just paid big bucks for the G5 a month before they came out with a cheaper upgraded version, which I am unhappy about. Of course those Tiger disks are for G5 ONLY, so I couldn't install to my G3 from them, so I coughed up the cash for the DVDs. I couldn't fathom giving them even more for a CD transfer.
Of course, if the G3 keeps crashing, and I hear from others that a direct install from CD may cure the problem, what choice will I have? As much as I've loved Apple over the years, there's starting to be a more corporate (and dare I say it, Gates-like) vibe from their method of doing business. Now the kid wants an iPod for Christmas, and I have to check those boards to see how they're performing. As helpful and fun as all this technology is, it is also quite stress-inducing...
Good luck with your upgrade! --kat
iMac G5 20" (ALS); 2G RAM | iMac G3 500MHz slot-load CD-R/W CRT; 1G RAM Mac OS X (10.4.3) Using Apple since IIe, and Macs since 1984
iMac G5 20" (ALS); 2G RAM | iMac G3 500MHz; slot-load CD-RW; 1G RAM Mac OS X (10.4.3) Using Apple since IIe, and Macs since 1984

Can't get Target Disk Mode to work with host computer

Here's the problem. My Powerbook G4 went down a week ago (it's 7 years old) and I suspect the problem is either the hard drive or the portion of the logic board controlling the drive. I also have a Power Mac G4 400 that's running OS 10.4 Tiger. I've been trying to extract some files (that I failed to back up) from the Powerbook via Target Disk Mode using the older Power Mac as the host, however the target disk doesn't show up on the host screen. When I boot up the Powerbook holding the T key, it chimes and the FireWire symbol shows up like it's suppose to, but that's as far as goes. I plan on upgrading to a newer Mac, which would probably work better as a host, but money is a bit tight right now. Any suggestions would be appreciated.

If the trouble with the Powerbook is either a failed hard drive or a failed hard drive controller, FireWire Target Disk Mode isn't likely to work with any host computer. What you may want to try is installing data recovery software on the desktop G4 and seeing whether it can see the Powerbook's drive (connected in FWTDM) even though it won't mount. Data recovery software is often able to salvage data from drives that won't mount normally; it may be able to do the same thing via FWTDM.
These three DR utilities are all available in free downloadable demo versions that will show you what the full version would be able to recover before you have to pay for anything:
Data Rescue
FileSalvage
VirtualLab
Good luck.

Is It Safe To Use Target Disk Mode Between My Intel iMac And A G4 eMac ?

I want to use DiskWarrior 4 to rebuild my Intel-iMac's directories but a suitable startup CD has not yet been produced.
So I intend to put DW on my old G4 eMac (OSX 10.4.10) and use Target Disk Mode between the two.
As they have different processors and OS will it be possible and more importantly will it be safe to do so?
Ian.

I received the very latest CD revision from Alsoft for DiskWarrior, Rev. 42. This latest version is STILL not able to boot the newest MacBook Pros. I tried, and eventually my MacBook just restarts to its internal HDD.
So I tried to run DiskWarrior 4.1 on a PowerMac Dual G4 which I had the Macbook Pro connected via target disk mode. NOTE: Both Macs are running the latest Mac OS X 10.5.4.
About half way through the "rebuilding directory" process, the G4 had a kernel panic and the black screen came up telling me to force shutdown my Mac. I nearly soiled myself. Luckily, the freeze up happened before the vital stage when DiskWarrior is replacing the directory. So MacBook Pro luckily booted back up okay.
So, I'd say to play it safe and NOT try to run DiskWarrior 4.1 from an older pre-Intel Mac to rebuild an Intel Mac's directory via target disk mode.
Currently, I think my only option I have to rebuild my Macbook Pro's directory is to install Mac OS X on an external HDD, install DiskWarrior and run it from there.

Startup problem after use in target disk mode with a PC. Ideas?

I used my Mac 10.4 in traget disk mode. Data transfers between Mac and PC worked fine (via Macdrive 6). After disconnecting and trying to boot normally, Mac doesn't recognize internal volume. It flashes the question mark.
Tried to repair disk via install DVD - disk utility found no problems.
Reapired permissons.
Reset PRAM and NVRAM.
Tried Startup utility - found the internal volume and even after selecting it for startup, I still get the flashing question mark.
Apple hardware test found no problems.
Archive and reinstall is not allowed.
Data can still be accessed fine via target disk mode.
Any ideas how to reinitialize or reset the startup volume?
Powerbook G4 Mac OS X (10.4.8)

Hello,
You need to put the Tiger Install Disc in the 2011 iMac, boot the 2011 uMac into Target mode...
http://support.apple.com/kb/HT1661
Boot the G4 holding the Option or alt key, hopefully the Install Disc in the 2011 iMac will show as a boot choice.
We just want to use the 2011 iMac as a big expensive FW Optical drive, it cannot be installed osing the 2011 iMac itself.

Disk startup full- can't boot normally. Now in target disk mode.

Hello all, so here's my dilemma-
My disk startup is full and now I am unable to boot my computer past the apple logo and the loading circle.
Here's what I've tried,
I am now in target disk mode attempting to transfer over my files to an external HD via a good computer and then wipe/restore the OS on my bad computer THEN transfer my files over to the bad(now good) computer however..... some of my files won't transfer, especially in my iphoto library (It's HUGE 82 gigs) & my very elaborate final cut pro projects that have taken me h o u r s to do.... For example, some video icons don't show up with a snapshot of the video as they are suppose to but instead they're shown with a a default video icon which almost makes me think they're damaged files but the thing is- I was just working with these files.. My comp passed all HD tests. I don't think it's damaged...I don't know what's going on. If I could just find a way to delete some files...especially from my trash(30 gigs in there) so I'm able to at least boot properly, that would be great
Is there anyway to retrieve these stubborn files via target disk mode or another option?
Also do you maybe have an easier way for me to go about this entire process instead of transferring 500gb of data back and forth? I tried to access my trashcan via target disk mode and delete the 30 gigs I have in there but I was unable to delete it- and I do have "read and write" switched on.
Thanks in Advance!! ANY help is appreciated. I'm at wits end here.
Details
-I have a mid 2012 macbook pro connected with the mid 2012 imac that I'm running on target disc mode via thunderbolt cable (I also tried a 2013 air- same issues)

Before you spend a lot of money with a professional recovery service, look over these links:
http://support.apple.com/en-us/HT201583
http://www.thexlab.com/faqs/trash.html
Ciao.

Installing OS X on older laptop via Target Disk Mode.

Similar Messages

Maybe you are looking for