Installing OSX Tiger on external drive

I have tiger OS10.4 installed on my macbook pro. I have a few external drives, one of which I have tiger os10.4 installed and use as a startup drive for certain work (audio) that I do. I want to install tiger OS 10.4 on another newly acquired hard drive but when I insert the apple OS tiger CD and ask it to install on the new HD it tells me that I cannot have the OS installed on this computer. Is there a limit to how many times I can install tiger from the CD ?

You can install Tiger a many times as you want on the computer the discs shipped with.
It may be the disc format. Try erasing the disk and then formating choosing 1 partition >> options >>GUID.
Let us know.
-mj

Similar Messages

  • How do I Install OSX to an External Drive Partition?

    I have an external FW800 drive that I've made two partitions on. One partition I want to install OSX to, for external booting; the other partition is just for storage. I'm trying to use the SNL install disk but It's not installing, it just stalls out. I must be doing something wrong.
    Thanks,
    John

    Is the external drive prepped correctly?
    Drive Preparation
    1.  Open Disk Utility in your Utilities folder.
    2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
    3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
    4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
    5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
    6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
    Steps 4-6 are optional but should be used on a drive that has never been formatted before, if the format type is not Mac OS Extended, if the partition scheme has been changed, or if a different operating system (not OS X) has been installed on the drive.
    When formatting has completed quit DU and return to the installer.  Complete the OS X installation.
    Or you can clone your current system to the partition:
    Clone using Restore Option of Disk Utility
    Open Disk Utility from the Utilities folder.
    Select the destination volume from the left side list.
    Click on the Restore tab in the DU main window.
    Check the box labeled Erase destination.
    Select the destination volume from the left side list and drag it to the Destination entry field.
    Select the source volume from the left side list and drag it to the Source entry field.
    Double-check you got it right, then click on the Restore button.
    Destination means the external drive. Source means the internal startup drive.

  • Installing OSX on an External Drive

    Hi,
    My harddrive on my iMac recently died and I am unable to afford to replace it, but I do have the use of an external USB harddrive which I hoped to install OSX onto. However once it was formated properly and I ran the instalation DVD it said that I could install it onto that drive. Please is there anything I can do to get osx installed and bootable from the external hard drive as my work is tied up in the use of that computer and without it I can't do any work and therefore can't get any income.
    Regards,
    John Curwood

    John, I am sorry to say that a USB drive is not able to boot a G5 iMac, only a firewire drive can do that. You can install OS X onto the drive, but it will not be able to boot your machine. The only thing I can think of is to take the drive out of the USB enclosure, and if it's a 3 1/2" SATA drive, replace your current hard drive with it.

  • HT4718 How do I install the seperate system recovery partition after installing OSX on an external drive?

    My Mac Mini (2011 - Mountain Lion) died on me and I'm trying to get Internet Recovery (or ANY recovery) to work.  I have done the hold down D on boot hardware test and the extensive test and it says all is well. However Internet Recovery downloads (or appears to) and then I just get a never-ending spinning wheel and Apple logo. 
    I just installed Lion 10.7 from my older Mini that can't run Mountain Lion onto the newer Mini's hard drive as an external disk.  How can I get the recovery partition added to that disk too?

    Google recovery disk assistant. Hopefully that'll be what you need.

  • How do i install tiger on external drive?

    ola, i have 2 dead 17" flatscreen (swivelhead) ppc imacs, i'm desperately want to resurrect one of them, having replaced the power supply (no thanks to apple and foxconn?) and it also has a faulty logic board (no thanks to apple?).... someone in cape town south africa, apparently can do component level repairs...... i have to ready the imac with an up to date 10.4 (tiger) OS from my mac pro running snow leopard.....
    how do i-
    1. install 10.4 onto an external drive and if possible
    2. update leopard on the external drive before i put it back into the faulty imac?
    thx
    francois

    Installing Tiger on a drive means restarting the master computer (MacPro) using the Tiger install disk. Since MacPro uses the Intel chip, I don't believe you will be able to restart that computer with the Tiger disk. If you can attach an external drive (using firewire) to a PowerPC computer, I suggest you use the Tiger install disk on the external drive to install 10.4. I would then attach it to the "dead" iMac (using firewire) and try and restart the computer while holding down the option key. Click on the external drive and see if the computer starts up. If it does, you probably have a corrupted operating system on your iMac. At this point you can try either to run DiskWarrior on the iMac or just use the Tiger install disk to replace the old system in the iMac (or reformat the drive and start fresh). Hope this helps.
    JDB

  • Install Leopard on an External Drive on a Snow Leopard Mac Book Pro

    Hi
    I have a MBP 17/CTO 2.66GHz i7, which came installed with Snow Leopard.
    I've used boot camp to install Windows 7.
    I've attempted to install Leopard 10.5.4 on an external drive.
    The steps I've taken:
    1 - Connected my WD Passport on the Firewire Port
    2 - Partitioned the drive. The first partition is 100GB, Mac OS/X Extended (journal) and I've selected the GUID Partition Scheme
    3 - Inserted the Mac OS/X Leopard DVD, and followed the instructions to restart
    4 - On restart I have three options. Mac OS, Windows and Install Mac OS\X
    5 - I select Install Mac OS\X.
    6 - The disc spins for a few moments and then the laptop freezes
    Beware of the following issue:
    1 - On restart more often than not, the DISC will spin and then the laptop will freeze.
    2 - To overcome this, restarting pressing the ALT (option) Key.
    3 - You should see your boot options. If you do not see "Install Mac OS\X", then eject and reinsert the disc.
    The question maybe why would I want to have an Leopard Installation when I have Snow Leopard. The software I develop has thrown up a number of differences between Leopard and Snow Leopard, hence I need both OS's to support my software.
    I mentioned this to the Apple Store before I purchased my machine. They put me through to a senior technician at Apple Care, who told me it would be possible to have the set up I am after; and to contact Apple Care if I ran into any difficulties.
    After I received my laptop and ran into the problems I described above I contacted Apple Care, only to be told by a senior technician that it should be possible to install Leopard on an external drive, but Apple Care cannot provide any support or assistance.
    I really do like the laptop and would much rather not return the laptop; but I really do need the setup described.
    Anyway I have tried a number of different approaches:
    1 - Having no partitions (so just the single partition)
    2 - Trying all three Partition Schemes:
    - GUILD Partition Table
    - Apple Partition Map
    - Master Boot Record
    All resulting in the same problem.
    I can confirm the external drive does appear as bootable in disc info.
    My guess is one of the following is preventing the install:
    1 - It is simply not possible to install an earlier version of Mac OS\X than 10.6 on the laptop I have, even if I tried to install on an external drive. This restriction is built into some hardware confirguration. So even if I wiped the internal hard drive or added a new partition to the internal hard drive, I would not be able to install 10.5.4. I say this may be a reason as the second technician told me the CPU has built into it a process which prevents installing older versions of Mac OS/X, but that it should NOT restrict installation on an external harddrive.
    2 - When trying to install Mac OS/X, a search is carried out for an external drive which has the correct format. For some reason it may be that this search is not finding my external drive?
    I'm a little stuck here and quite disapointed that the support promised by Apple Care for assistance in setting this up, is now not forth coming.
    Any help or suggestions would be appreciated, as ideally I would prefer to keep and not return the laptop, it's a beautiful piece of machinery.
    Cheers
    Parmy

    The mystery continues...
    I have an older MBP (2.33 GHz Intel Core Duo) which came installed with Tiger. I can confirm I purchased a genuine copy of Leopard (10.5.4) from the Apple Store and it’s not an OEM version. I installed 10.5.4 without a hitch on my old MBP internal drive. It is the only OS installed on my old MBP.
    Using my older MBP (which through software updates is now running 10.5.7), I managed to install 10.5.4 onto my external HD (WD My Passport Studio – 640GB FireWire 800).
    However; on the final restart, the screen remained grey and 10.5.4 did not boot from the external drive.
    I restarted the machine holding down the ALT (option) key, and only two options appeared, Macintosh HD and the Install DVD. I selected the Macintosh HD and opened System Preferences.
    In System Preferences --> Startup Disk, I discovered the partition on my external HD which contains 10.5.4. I selected this partition and selected restart.
    On restart my MBP displayed a grey screen, and the blue light on my hard drive flashed slowly. I left this for an hour, however; the OS did not start and the screen remained grey.
    I then plugged my external HD into my new MBP which I started holding down the ALT key.
    To my surprise I found 3 boot options (Macintosh HD, Windows and Leopard). Leopard being the partition on my external drive, which now has 10.5.4 installed.
    I selected Leopard, but sadly after 30 minutes, the OS failed to boot.
    Although this deviates slightly from this post, I fail to understand the problem here:
    1 – Why can’t I boot 10.5.4 on an external drive, from my old MBP? Surely this is not because my old MBP is now running 10.5.7?
    2 – Why can I see 10.5.4 as a boot option on my new MBP but not on my old MBP when I start the MBP holding down the ALT key?
    I doubt there is a problem with my external drive, as it seems to read, write, etc... in all normal cases.
    Whilst it definitely appears that I won’t be able to boot 10.5.4 on an external drive from my new MBP, I should be able to at least boot it from my old MBP, which would give me the option of installing Snow Leopard and Windows on the internal drive of my old MBP.
    Apologies for keeping this post going, but I hope by getting to the bottom of this, it will help other Mac users as well.
    I’ve run out of ideas of things to try, so I will give Apple Care another call in the morning, and will report back.
    Any suggestions of other things I can try?
    Cheers

  • Can I install Linux on an external drive?

    I'm kinda curious about something. If I boot up off an external firewire drive at boot time and I have previously partitioned it into 2 partitions (techtool or iPartition) is it possible to install a Intel Linux distro on the 2nd partitition?
    When I go to boot from that external drive will the Linux installed boot loader allow me to select OSX or Linux to actually boot from?
    Even better can I just install Linux on this external drive in the only partition?
    I'm only looking to experiment with a Linux distro and I don't want to use Parallels anymore so I'm wondering if I can use an external drive to do so.
    TIA,
    Peter

    I'm kinda curious about something. If I boot up off
    an external firewire drive at boot time and I have
    previously partitioned it into 2 partitions (techtool
    or iPartition) is it possible to install a Intel
    Linux distro on the 2nd partitition?
    When I go to boot from that external drive will the
    Linux installed boot loader allow me to select OSX or
    Linux to actually boot from?
    Even better can I just install Linux on this external
    drive in the only partition?
    I'm only looking to experiment with a Linux distro
    and I don't want to use Parallels anymore so I'm
    wondering if I can use an external drive to do so.
    TIA,
    Peter
    Here is an indirect answer. I know you can using Paralles, not sure about the other way though.
    http://www.parallels.com/

  • Install iPhoto 9 on external drive

    I am transitioning from a MacBook Pro with OSX 10.75 and iPhoto '11 to a new MacBook Pro with Yosemite, and no iPhoto installed.
    I want to install iPhoto on an external drive, because I have thousands of photos that are taking up too much space to even fit on my new Mac.
    When I go to the App store and choose Install on the iPhoto page, it does not give me the option to choose the location to install it onto.
    I have the external drive formatted Mac OS Extended (Case Sensitive, Journaled).
    How can I install iPhoto 9 on this external drive?

    The iPhoto Application MUST be in the applications folder - it can not be anywhere else
    The iphoto library (where you photos are stored) can be on any drive that is formatted Mac OS extended (journaled) and is directly connected to your Mac with a fast hard wired connection (Firewire, USB 2 or 3, Thunderbolt)
    Moving the iPhoto library is safe and simple - quit iPhoto and drag the iPhoto library intact as a single entity to the external drive - depress the option key and launch iPhoto using the "select library" option to point to the new location on the external drive - fully test it and then trash the old library on the internal drive (test one more time prior to emptying the trash)
    And be sure that the External drive is formatted Mac OS extended (journaled) (iPhoto does not work with drives with other formats) and that it is always available prior to launching iPhoto
    And backup soon and often - having your iPhoto library on an external drive is not a backup and if you are using Time Machine you need to check and be sure that TM is backing up your external drive
    LN

  • Help!! accidentally install OSX Tiger into my backup harddisk!!

    Help! accidentally install OSX Tiger into my backup harddisk!!
    i lost all my backup files, work, my life! i have 2 HDD and one is suppose to be installed onto and the other one is my backup hdd..
    what happened is i selected onto the wrong hard-disk...
    is there anything i can do to recover back files that i installed over osx?
    any suggestion much appreciated

    Hi Ma'e, Welcome to Apple Discussions.
    Installing OS X should not overwrite your files unless you chose "erase and install". If you chose "Archive and install" look for a folder on the top level of your hard drive called "Previous System".
    If you did an "erase and install", If there is any chance of recovery at all your best bet is Prosoft Data Rescue. There is a free trial to see if it can recover what you need. But don't do another process on that drive until you've downloaded and run it. Also, a service that has been recommended but I cannot personally endorse is DriveSavers.
    -mj
    [email protected]

  • Installing OS X on external drive

    I have a Mac Mini with an 80gig HD. It currently has the OS X operating system on it and be able to boot from the external drive. I want to install the system on a 300gig external drive, but it won't let me erase the 80gig drive so I can then boot from the install CD and install OS X on the 300gig drive.
    My question is how do I erase the drive that already contains the operating system. I tried an erase & install, but it won't let me install on the external drive, only on the internal drive.
    Would appreciate any guidance, suggestions, directions and help. Thanks.
    Mac OS X (10.4.7)

    Do you have a USB or a FireWire external drive?
    It is not possible to install OSX on a external USB drive, it has to be FireWire. Because your Mac can not boot from a USB drive, only from FireWire.
    If your external HD is USB, you can maybe put the HD in a FireWire enclosure. This would be the only solution
    If you want to erase the HD where OSX has been installed on, you need to start up from the installation CD. Insert the CD, hold down the C key and restart your Mac. Now your mac will boot from the CD. After booting you can select a language. Then you have to agree with the software agreement. Now you have to go to the utilities menu (on top off the screen) and select disk utility. In disk utility you can select the HD you want to erase and erase it. Really easy.
    Hopefully this solved your problem. (see button above this message)

  • Help Installing OSX Tiger on iMac G4, seems HD Volume Structure corrupted

    I need help Installing OSX Tiger on an iMac G4 800MHz 17" Flat Screen LCD, 80 GB Hard Drive, 256MB RAM, DVD-R/CD-RW Super Drive, model# M8812LL/A. I have a Tiger install DVD and i put it in the drive and everything is fine....I go through the steps and when it gets to "Preparing the Disk" - "Verifying destination volume"....it just sits and nothing happens. It will go on for 20+ minutes or so and then the installer will quit saying there was errors during the update. Anyone got any idea what is happening? I'm running OSX 10.3 Panther currently. I just tried running Disk Utility using the install DVD.....it attempted three times and couldn't repair --- I then went out and purhased DiskWarrior --- I boot from that disk, it begins to run; then as it is repairing the volume it freezes and stays frozen for hours. I've rebooted and tried it numerous times with no luck. Is the HD no good? Should I just do a complete reinstall of Tiger and erase everything? I'd rather not, but I backed everthing up in case I need to. Also, when I ran TechTool Deluxe from the booted CD, it said the Volume Structure was corrupted. My Tiger disc is a retail full install disc that I purchased.
    Thanks for your help!!!

    Use Disk Utility to Restore to a FW drive.
    Use one of your FW drives, and create a 24GB partition - later you can reuse this for your emergency boot drive). Restore the DVD to FW volume. Boot from there to install with - very fast.
    Low level format is what you probably want/need and the only way to do that is ERASE with the option to ZERO-ALL (after you backup any files you don't now have on disk or DVD.... and where are the backups?).
    When you install it will also verify the DVD install disk itself.
    Have you tried using FSCK from the command line? Or do you no longer have a valid system on the boot drive? Nothing to lose it seems at this point from trying. Just hold down COMMAND + S on startup. At the prompt, follow direction to type:
    /sbin/fsck -fy

  • Can I install Leopard on an external drive to run my computer?

    Since it seems my hard drive has totally bit the dust, can I install Leopard on the external drive I use for Time Machine, and run my desktop from that drive? Could I run it from an external drive totally dedicated to Leopard? I am buying a new desktop soon, but I need info off of this machine. Can I plug in my Time Machine drive to my laptop and be able to use it without losing data?

    Elizabeth Salcido wrote:
    Thanks so much.
    Youa re welcome!
    I figured I would have to use a second drive. At least when I get my new desktop I will have a drive for Time Machine for both desktop and laptop.
    If you really plan to keep the laptop around after you get your desktop, I would recommend replacing its internal hard drive. While running your laptop off an external is possible, it should be considered a stopgap measure. i wouldn't do it on a permanent basis. For one, as you'll find out, it's quite a bit slower than when using the internal drive.

  • Can I install os9 on an external drive from mavericks

    Can I install OS9 on an external drive from Mavericks? I'm running Mavericks 10.9.4 on both my MBP and 27" iMac. I have my original OS9 install disc. I'd like to install OS9 on an external drive so I can use some classic apps that I'd like to use.
    I tried to install directly to an external drive, but when I click on the Mac OS Install icon, I get the message "You can't open the application "%@" because it may be damaged or incomplete." The icon for Mac OS Install is the generic page with an A. Figuring that Mavericks doesn't recognize the app. Then I restarted and held down the C key - no luck.

    I understand, but was hoping I boot off an external drive in 9. Thanks for your response and I apologize for my late response.

  • HT4904 Help. I have an older 20 inch iMac and had Lion running on it but the internal hard drive died. I'm trying to install Lion on an external drive but it doesn't look like Lion Recovery is supported. I have Leopard installed but am stuck.

    Hello,
    My 20inch iMac's internal drive died and I'm trying to re-install Lion on an external drive. If I could get the Lion DMG file I think I'd be all set but am not sure how to do this. It doesn't look like the Lion Recovery feature is supported in my older iMac. And I have Leopard installed on the external drive but there's no AppStore to download the Lion DMG file.
    Any suggestions?
    Thanks,
    -Lee

    Without a bootable backup/clone or a Time Machine backup of your previous Snow Leopard installation or a saved copy of Lion's install app, you'll have to upgrade your Leopard volume to Snow Leopard (10.6.6+) so you can waste another hour or more DLing the Lion thing again.

  • HT3986 can bootcamp be used with Windows install disk on an external drive (internal is broken) ?

    can bootcamp be used with Windows install disk on an external drive (internal is broken) ?

    With Boot Camp, you must install Windows onto in internal HDD (or SSD).  If you are referring that your internal Optical drive is broken, you might be able to install Windows from an external drive, but you might not.  I have heard varying levels of success with that.  I'm not sure what the official stance is, but I do know that if youe machine shipped with an internal optical drive, then you must use that to install Windows using Boot Camp and not swap it out for a "data doubler" and try to install from an external optical drive.

Maybe you are looking for