Installing patch 5217019 takes long time and does not end
Hi,
I try to install patch 5217109 to my TEST instance.While installing patch the 8 workers are selected default.7 of workers are in statu of completed but 1 worker is waiting for long times and does not end.
What can be my problem?
Start time for file is: Mon Aug 10 2009 11:45:01
sqlplus -s APPS/***** @/oracle/TEST/testappl/ad/11.5.0/admin/sql/adpcpcmp.pls APPLSYS &pw_fnd APPS &pw_apps &systempwd 8 1 NONE FALSE
Arguments are:
AOL_schema = APPLSYS, AOL_password = *****,
Schema_to_compile = APPS, Schema_to_compile_pw = *****,
SYSTEM_password = *****, Total_workers = 8, Logical_worker_num = 1
Object_type_to_not_compile = NONE
Use_stored_dependencies = FALSE
Connected.
Checking for previously-invalid objects which are now valid...
PL/SQL procedure successfully completed.
Elapsed: 00:00:00.03
Commit complete.
Elapsed: 00:00:00.00
Deleting any errors from previous run of this logical worker
0 rows deleted.
Elapsed: 00:00:00.00
Commit complete.
Elapsed: 00:00:00.00
Compiling invalid objects...
Similar Messages
-
Installing patch 5217019 takes long time.
Hi,
I will install patch 5217019.But it does not complete succesfuly.Compiling apps schema takes long time I think.There are a lot of invalid objects.
please help me to install patch 5217019.
thanks.This is an EBS patch for WF Notificaton Mailer. What are your OS and EBS versions and your ATG RUP version ? This patch is included in ATG RUP5 and above. Have all of the pre-req patches listed in the readme file been applied ? What is your definition of a "long time" ?
HTH
Srini -
Time machine takes very long time and does not finish the backup
Hi,
Time machine is unable to backup my 2014 Mackbook Air 128 GB Drive anymore.
I have tried numerously to initiate a backup but it could only backup a very small volume, less than 1KB, then stall for hours without any progress.
I tries to repair my volume, using the Disk Utility, but it still does not backup, except for the 1K progress.
I have noticed that "Spot Light" indexing is also taking forever. It has been indexing for days without any pogress.
What is going on.
What should I do to fix it.
My latest successful backup was on Jul 25.
Please help.
Thanks.
TareqThese instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.
In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter the word "Starting" (without the quotes.) You should now see log messages with the words "Starting * backup," where * represents any of the words "automatic," "manual," or "standard."
Each message in the log begins with the date and time when it was entered. Note the timestamp of the last "Starting" message that corresponds to the beginning of an an abnormal backup. Now
CLEAR THE WORD "Starting" FROM THE TEXT FIELD
so that all messages are showing, and scroll back in the log to the time you noted. Select the messages timestamped from then until the end of the backup, or the end of the log if that's not clear. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
☞ If all you see are messages that contain the word "Starting," you didn't clear the text field.
☞ The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. Don't post more than is requested.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
☞ Some private information, such as your name, may appear in the log. Anonymize before posting. -
HT1351 for syncing it takes long time and not completed what to do???
for syncing it takes long time and not completed what to do???
Debbie:
deborahfromwindsor wrote:
he advises restarting by inserting the OSX disc and pressing down the C button to reboot from there then selecting disk utility, hard disk and repair.... Does he mean me to hold down the C key on the alpha keyboard or the ctrl key?
Should I just ask for my money back??? If it is a simple repair do I just literally push the disc in, push the power button and hold down the C button?
That's where I would begin, too, with
Repair Disk
Insert Installer disk and Restart, holding down the "C" key until grey Apple appears.
Go to Installer menu (Panther and earlier) or Utilities menu (Tiger) and launch Disk Utility.
Select your HDD (manufacturer ID) in the left panel.
Select First Aid in the Main panel.
(Check S.M.A.R.TStatus of HDD at the bottom of right panel, and report if it saysanything but Verified)
Click Repair Disk on the bottom right.
If DU reports disk does not need repairs quit DU and restart.
If DU reports errors Repair again and again until DU reports disk is repaired.
If DU reports errors it cannot repair you will need touse autility like TechTool Pro,Drive Geniusor DiskWarrior
First we need to determine if the issue you are experiencing with the computer is software or hardware based. Once we have gotten things sorted out there should be time enough to make you decision about keeping or returning it.
cornelius -
Problem Export to Excel it takes long time and Takes more space.
Hello All,
when we export to Excel in portal(reports), it takes long time and it takes more space.
how to overcome this problem please any one knows provide the proper solution for this issues
Regards,
Ch.Hi Chetans,
I have had the same problem, and I had to create a OSS message to SAP in order to solve this issue, until now I don't have an answer. They made me to change a lot of configuration in Java and BW without luck. To tell you more, when we try to export to excel the java instance restarts aumotatically.
But we have this problem, when we try to export a huge quantity of data, so I found a note which says the limitation of exporting to excel. Take a special attention to the Performance section.
Note 1178857
[https://service.sap.com/sap/support/notes/1178857|https://service.sap.com/sap/support/notes/1178857]
I recomend you that you create a message to SAP. If you find a solution, please let me know.
Regards, Federico -
When Streaming a movie or tv show it stops after a short time and does not finish downloading. We watch the TV show or movie than nothing !!!
a message comes up An error occurred loading this content try again later. We have unplugged everything rebooted several times and nothing
helps. It was working fine until we did a upgrade that showed up on the Apple TV.
modle A1427 3rd generation
Any help would be GREATLY appreciated Nothing on regular TV miss my Apple TV stuff !!!!Welcome to the Apple Community.
Try the following steps, check whether things are working after each step where appropriate, before trying the next.
Restart the Apple TV (Settings > General > Restart).
Restart the Apple TV by removing ALL the cables for 30 seconds.
Restart your router.
Reset the Apple TV (Settings > General > Reset > Reset all settings)
Restore the Apple TV (Settings > General > Reset > Restore) -
Validate map in FDM takes long time and finally expires
Hi,
I have an issue with FDM Mapping.
When i click the "validate" option in workflow, the FDM processing takes long time (more than an hour) and finally expires.
But when i open a new web interface, i am seeing a gold fish on validate - which means validate mapping has been done.
As we are in production environmeny, Can someone quickly clarify me, why this happen.
Thanks,
SivaHello Kelly,
Something you said concerns me: +"Because we automated data loads for the large file, this issue is extremely low on the priority list."+
In this type of scenario we notice customers/partners implementing FDM as an 'ETL' utility. FDM is not an ETL utility and should not be treated/used as such. In the event that you are doing this, Support has no control of the application as it is a mis-use of what FDM is for.
Files that are being pushed into FDM should always be broken down into the smallest components(locations) and used as a 'front end,' user interface.... not a server-side/IT application. If you meet this criteria of FDM, then there is not much Support can do.
If you do not think you are misusing FDM, I would highly suggest you open/create a Support SR if you do not use FDM in that manor. Consultants/Partners are functional/design based.... and not necessarily trained as Support Engineers. Therefore they might not have the skills required to make such determinations.
Thank you,
Oracle Global Customer Support -
Query Saving takes long time and giving error
Hi Gurus,
I am creating one query that have lot of calculations (CKF & RKF).
When I am trying to save this query it is taking long time and it is giving error like RFC_ERROR_SYSTEM_FAILURE, Query Designer must be restarted, further work not possible.
Please give me the solution for this.
Thanks,
RChowdaryHi Chowdary,
Check the following note: 316470.
https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=316470
The note details are:
Symptom
There are no authorizations to change roles. Consequently, the system displays no roles when you save workbooks in the BEx Analyzer. In the BEx browser, you cannot move or change workbooks, documents, folders and so on.
Other terms
BW 2.0B, 2.0A, 20A, 20B, frontend, error 172, Business Explorer,
RFC_ERROR_SYSTEM_FAILURE, NOT_AUTHORIZED, S_USER_TCD, RAISE_EXCEPTION,
LPRGN_STRUCTUREU04, SAPLPRGN_STRUCTURE, PRGN_STRU_SAVE_NODES
Reason and Prerequisites
The authorizations below are not assigned to the user.
Solution
Assign authorization for roles
To assign authorizations for a role, execute the following steps:
1. Start Transaction Role maintenance (PFCG)
2. Select a role
3. Choose the "Change" switch
4. Choose tab title "Authorizations"
5. Choose the "Change authorization data" switch
6. Choose "+ Manually" switch
7. Enter "S_USER_AGR" as "Authorization object"
8. Expand "Basis: Administration"/"Authorization: Role check""
9. From "Activity" select "Create or generate" and others like "Display" or "Change"
10. Under "Role Name", enter all roles that are supposed to be shown or changed. Enter "*" for all roles.
11. You can re-enter authorization object "S_USER_AGR" for other activities.
Assign authorization for transactions
If a user is granted the authorization for changing a role, he/she should also be granted the authorization for all transactions contained in the role. Add these transaction codes to authorization object S_USER_TCD.
1. Start the role maintenance transaction (PFCG).
2. Select a role.
3. Click on "Change".
4. Choose the "Authorizations" tab.
5. Click on "Change authorization data".
6. Click on "+ manually".
7. Specify "S_USER_TCD" as "Authorization object".
8. Expand "Basis - Administration"/"Authorizations: Transactions in Roles".
9. Under "Transaction", choose at least "RRMX" (for BW reports), "SAP_BW_TEMPLATE" (for BW Web Templates), "SAP_BW_QUERY" (for BW Queries and/or "SAP_BW_CRYSTAL" (for Crystal reports) or "*". Values with "SAP_BW_..." are not transactions, they are special node types (see transaction code NODE_TYPE_DEFINITION).
Using the SAP System Trace (Transaction ST01), you can identify the transaction that causes NOT_AUTHORIZED.
Prevent user assignment
Having the authorization for changing roles, the user is not only able to change the menu but also to assign users. If you want to prevent the latter, the user must loose the authorization for Transactions User Maintenance (SU01) and Role maintenance (PFCG).
Z1>Note
Refer to Note 197601, which provides information on the different display of BEx Browser, BEx Analyzer and Easy Access menu.
Please refer to Note 373979 about authorizations to save workbooks.
Check in the transaction ST22 for more details on the Query designer failure or query log file.
With Regards,
Ravi Kanth.
Edited by: Ravi kanth on Apr 9, 2009 6:02 PM -
MDX report rendering takes long time and showing Conflict Message
Hi All,
This is my MDX Query
with member
[Measures].[Rent] as
IIF(IsEmpty([Measures].[Budget]),
NULL, [Measures].[Rent])
select {[Measures].[Rent]}
on columns,
[Property].[Address].[All].children *
DESCENDANTS([Account].[Account Hierarchy].[Account Group].[Expenditures],
[Account].[Account Tree].[Account]) *
[Property].[Property].[All].children
on rows
from
[Master]
When i comment [Property] Dimension member , i am able to get the result, but i need Property Dimension in MDX.
Can anyone give some idea ?
Thanks in advanceHi Jarugulalaks,
According to your description, it take long time to render the report when using [Property] dimension, right?
In this case, the issue can be caused by that there are too many members under this dimension. In your query, you used CrossJoin function to join multiple dimensions which might cause the performance issue. If you cross-join medium-sized or large-sized sets
(e.g., sets that contain more than 100 items each), you can end up with a result set that contains many thousands of items—enough to seriously impair performance. You can use the NonEmptyCrossjoin function instead of Corssjoin function. For the detail
information, please see:
http://sqlmag.com/data-access/cross-join-performance
http://msdn.microsoft.com/en-us/library/ms144797.aspx
Besides, the total time to generate a reporting server report can be divided into 3 elements: Time to retrieve the data (TimeDataRetrieval); Time to process the report (TimeProcessing); Time to render the report (TimeRendering). For the detail information,
please refer to the link below to see Charlie's reply.
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/a0962b54-6fc2-4111-b8f1-a3722a65fa05/how-to-improve-performance-of-report?forum=sqlanalysisservices#a0962b54-6fc2-4111-b8f1-a3722a65fa05
Regards,
Charlie Liao
TechNet Community Support -
Application Builder takes long time and Popup messages during Build
Hi All,
My application is slightly bigger with over 300 VI's. In between the build process I receive pop up messages asking GMath library files etc.. are modifies would u like to save the files..? When clicked on OK button it starts saving these library files and when it saves almost half the number of files the application builder crashes and causes LabView to close. As the build process is taking more than 2 hours and end result is always an unsuccesful build due to the application builder crash I am loosing my time.
Regards,
Pavan
Solved!
Go to Solution.Hi,
I recently upgraded from LV 7.1 to 2009, both the Professional versions. My program consists of several hundred vi's. Building an .exe in LV 7.1 was a snap and took maybe 30-50 seconds (not including an installer). Building the same thing in LV 2009 (build script converted to project) takes nearly 30 minutes, not including creating an installer... most of the time is spent 'processing' and then saving vi's, which LV 7 did not appear to do. I've tried the Ctrl+Shift+Run suggested by JB but this does not help. I've also applied the 2009f patch. It still takes a fair amount of memory, 0.5 GB, but my core 2 duo PC has 2 GB and there is plenty available RAM. Any suggestions/details on the differences and something I could do to cut down on the build time?
thanks,
Dan -
Un-Registering takes long time and fails!!!
I am trying to un register a schema that ia already registered in the XML DB. I am using JDeveloper to un register and it really takes a long time to do this. and eventually fails.
what is going on? what is broken?
XML DB is flaky and unreliable.
right?First make sure that all connections that have used the XML Schema are disconnected. Schema deletion cannot start until all sessions that are using the schema have been closed as it needs to get an exclusive lock on the SGA entrires related to the XML Schema.
If there are a large number of rows in the table(s) associated with the XML Schema truncate the table before dropping the XML Schema. If there are a large number of XDB repository resources assocaited with the table, truncate the table and then delete the resources with DBMS_XDB.DELETERESOURCE() mode 2 or 4 to ignore errors and avoid dangling ref issues.
To monitor the progress of deleteSchema itself connect as sys and execute select count(*) from all_objects where owner = 'XXXX'. XXXX should be the name of the owner of the database schema that was the owner of the XML schema. See if the number of objects owned by that user is decreasing. If the number of object is decreasing have patience. -
Secure Store Service Application takes a lot of time and does not create the database
Hi everybody,
I was trying to configure sharepoint performance point and I was following the instruction. After I created the performance point services application I tried to creat the secure store service application. When I do this, the progress window stays open forever
even after 2 hours. If I close the window, I will see that the secure store service and proxy app is created and the application pool also is created in IIS but the database is not and the application service is stopped. even when I want to delete it, it's
the same story and the progress window stays until I close it manually. Nothing has been logged in the event viewer because it doesn't throw any exceptions.
I don't think that I have permission issues on the database server side because I have created the performance point service app and the database is there. I have used the same credentials to crete the secure store.
I have restarted the secure store service and IIS for many times and even the server itself.
I'm wondering if anybody has had this issue because I couldn't find anything on the web.
Thanks,
EdwinAlex, please ignore my previous answer. I found more information in the ULS. At the time that I started creating the service application by power shell these things are logged and they are repeated several times:
it starts with:
11/13/2013 15:19:55.52 PowerShell.exe (0x1698)
0x170C
Secure Store Service
Secure Store
esj6 High
Creating Secure Store Service Application 'Secure Store Service Application'.
c402af0c-5ff6-4995-83b8-3f95210a8b3d
11/13/2013 15:19:55.54 PowerShell.exe (0x1698)
0x170C
Secure Store Service
Secure Store
esj9 Medium
Creating "database object" 'SP_SecureStore' for application. At this time database is not created.
c402af0c-5ff6-4995-83b8-3f95210a8b3d
11/13/2013 15:19:55.54 PowerShell.exe (0x1698)
0x170C
Secure Store Service
Secure Store
esk0 Medium
Saving "database object" 'SP_SecureStore' in the config db.
c402af0c-5ff6-4995-83b8-3f95210a8b3d
11/13/2013 15:19:55.83 w3wp.exe (0x0944)
0x0DB4
Secure Store Service
Secure Store
d4gx Verbose
BackgroundTasks instance accesed.
11/13/2013 15:19:55.83 SPUCWorkerProcessProxy.exe (0x13A0)
0x02B0
Secure Store Service
Secure Store
d4gx Verbose
BackgroundTasks instance accesed.
11/13/2013 15:19:55.83 PowerShell.exe (0x1698)
0x1740
Secure Store Service
Secure Store
f7wk Verbose
StartTracker called for secure store ''
11/13/2013 15:19:55.83 PowerShell.exe (0x1698)
0x1740
Secure Store Service
Secure Store
f7wl Verbose
Tracker not started because call not made from Service Host.
11/13/2013 15:19:55.83 WebAnalyticsService.exe (0x0A6C)
0x1B88 Secure Store Service
Secure Store
f7wk Verbose
StartTracker called for secure store ''
Finally it says:
11/13/2013 15:19:55.90 PowerShell.exe (0x1698)
0x170C
Secure Store Service
Secure Store
esk9 High
Secure Store Service Application 'Secure Store Service Application' created.
c402af0c-5ff6-4995-83b8-3f95210a8b3d -
WebKit2WebProcess.exe quits several times and does not open web page.
Steps to Reproduce:
1. Setup latest Safari on Windows XP (Safari 5.1.7 for Windows).
2. Visit to http://www.navyfield.com.
Actual Result:
Safari does not open web page. WebKit2WebProcess.exe quits several times while open web page. drwtsn32 reports a log (can attach log).Safari for Windows is unsupported and obsolete, and should not be used.
-
When I connect my Time Machine it appears mounted several times and does not back up.
Two weeks ago when I connected my external hard drive containing my Time Machine, the drive was listed several times in my finder sidebar with one mounting in the regular teal color and the other seemingly faded but still clickable. The Time Machine says that it is backing up but hasn't since then. I hadn't changed any Time Machine settings nor touched the external hard drive in any way that I could explain why this is suddenly happening. When I eject the machine I have to force eject every instance of it listed.
I've had this Time Machine for over two years now and have never had a problem with it. While I could hypothetically rewrite the whole Time Machine if that would fix the answer, I would rather not lose those two years of information. I've yet to find any other cases of this and am not sure exactly what is even happening, so any thoughts or ideas would be greatly appreciated.Ooops!
First Timer mistake.
Sorry. -
Table Import Takes long time and still running
Hi All,
MY DB Version: 10.2.o
OS: Windows Server 2003
I am trying to import on table which i have the export dump file which i take using expdp previously when i load that table on the same host
by using below command:
expdp scott/tiger@db10g tables=EMP,DEPT directory=TEST_DIR dumpfile=EMP_DEPT.dmp logfile=expdpEMP_DEPT.log
after that i zip that dump and move it to external usb and now i need that table i copy that table and unzip that that dump
Command i am using to do the import is :
impdp scott/tiger@db10g tables=EMP,DEPT directory=TEST_DIR dumpfile=EMP_DEPT.dmp logfile=impdpEMP_DEPT.log
But the query of import is still runing even not showing any amount of rows to be imported.
i already make the tablespace in which the table was previosuly before dropping
but when i check the sapce of tablespace that is also not consuming
one error i got preiviously while performing this task is:
Connected to: Oracle Database 10g Enterprise Edition Release 10.1.0.2.0 - Production
With the Partitioning, OLAP and Data Mining options
Master table "CDR"."SYS_IMPORT_TABLE_03" successfully loaded/unloaded
Starting "CDR"."SYS_IMPORT_TABLE_03": cdr/********@tsiindia directory=TEST_DIR dumpfile=CAT_IN_DATA_042012.DMP tables=CAT_IN_DATA_042012 logfile=impdpCAT_IN_DATA_042012.log
ORA-39065: unexpected master process exception in RECEIVE
ORA-39078: unable to dequeue message for agent MCP from queue "KUPC$C_1_20120622102502"
Job "CDR"."SYS_IMPORT_TABLE_03" stopped due to fatal error at 12:10
i done some google on the same proble
and i check streams_pool_size it will show zero and then i make it to 48M and after that
SQL> show parameter streams_pool_size;
NAME TYPE VALUE
streams_pool_size big integer 48M
But still it takes time
Any help1) check the session :
SQL> select username,sid,serial#,status,event,seconds_in_wait,wait_time,state,module from v$session where username='CDR'
2 ;
USERNAME SID SERIAL# STATUS EVENT SECONDS_IN_WAIT WAIT_TIME STATE MODULE
CDR 73 1 ACTIVE wait for unread message on broadcast channel 3 0 WAITING
CDR 75 1 ACTIVE wait for unread message on broadcast channel 10 0 WAITING
CDR 77 1 ACTIVE wait for unread message on broadcast channel 10 0 WAITING
CDR 81 313 ACTIVE wait for unread message on broadcast channel 530 0 WAITING impdp.exe
CDR 87 70 ACTIVE enq: SS - contention 1581 0 WAITING toad.exe
CDR 90 1575 ACTIVE wait for unread message on broadcast channel 3 0 WAITING
CDR 92 1686 ACTIVE enq: SS - contention 619 0 WAITING
CDR 99 5 ACTIVE PX Deq Credit: send blkd 0 0 WAITING TOAD 9.1.0.62
CDR 103 3 ACTIVE direct path read 0 0 WAITING TOAD 9.1.0.62
CDR 105 6 ACTIVE direct path read 0 0 WAITING TOAD 9.1.0.62
CDR 107 6 ACTIVE PX Deq Credit: send blkd 0 0 WAITING TOAD 9.1.0.62
USERNAME SID SERIAL# STATUS EVENT SECONDS_IN_WAIT WAIT_TIME STATE MODULE
CDR 108 16 ACTIVE PX Deq Credit: send blkd 1 0 WAITING TOAD 9.1.0.62
CDR 109 40 ACTIVE PX Deq Credit: send blkd 1 0 WAITING TOAD 9.1.0.62
CDR 110 6 ACTIVE enq: TX - row lock contention 1 0 WAITING TOAD 9.1.0.62
CDR 111 21 ACTIVE direct path read 0 0 WAITING TOAD 9.1.0.62
CDR 112 27 ACTIVE PX Deq Credit: send blkd 1 0 WAITING TOAD 9.1.0.62
CDR 113 8 ACTIVE log buffer space 0 0 WAITING TOAD 9.1.0.62
CDR 117 4496 ACTIVE db file scattered read 0 0 WAITING TOAD 9.1.0.62
CDR 119 9 ACTIVE PX Deq Credit: send blkd 0 0 WAITING TOAD 9.1.0.62
CDR 120 27 ACTIVE PX Deq Credit: send blkd 0 0 WAITING TOAD 9.1.0.62
CDR 123 1 ACTIVE sort segment request 22349 0 WAITING
CDR 129 22 ACTIVE PX Deq Credit: send blkd 0 0 WAITING TOAD 9.1.0.62
USERNAME SID SERIAL# STATUS EVENT SECONDS_IN_WAIT WAIT_TIME STATE MODULE
CDR 131 14402 INACTIVE SQL*Net message from client 2580 0 WAITING TOAD 9.1.0.62
CDR 135 11 ACTIVE log buffer space 0 0 WAITING TOAD 9.1.0.62
CDR 136 6 ACTIVE direct path read 0 0 WAITING TOAD 9.1.0.62
CDR 138 234 ACTIVE sort segment request 19859 0 WAITING
CDR 162 782 INACTIVE SQL*Net message from client 550 0 WAITING TOAD 9.1.0.62
2) check the impprt status:
SQL> select owner_name, job_name, operation, job_mode, state FROM dba_datapump_jobs;
OWNER_NAME JOB_NAME OPERATION JOB_MODE STATE
CDR SYS_IMPORT_TABLE_01 IMPORT TABLE EXECUTING
3) in a new window
C:\Documents and Settings\vikas>impdp cdr/cdr123_awcc@tsiindia dumpfile=CAT_IN_DATA_042012.dmp tables=CAT_IN_DATA_042012 logfile=impdpCAT_IN_DATA_042012.log directory=test_dir parallel=4
Import: Release 10.1.0.2.0 - Production on Friday, 22 June, 2012 15:04
Copyright (c) 2003, Oracle. All rights reserved.
Connected to: Oracle Database 10g Enterprise Edition Release 10.1.0.2.0 - Production
With the Partitioning, OLAP and Data Mining options
Master table "CDR"."SYS_IMPORT_TABLE_01" successfully loaded/unloaded
Starting "CDR"."SYS_IMPORT_TABLE_01": cdr/********@tsiindia dumpfile=CAT_IN_DATA_042012.dmp tables=CAT_IN_DATA_042012 logfile=impdpCAT_IN_DATA_042012.log directory=test_dir parallel=4
Maybe you are looking for
-
I have seen other people criticize post-ers for their lack of details, so here it goes: (1) I was running the other day with my 4GB iPod Nano 1st Generation + Nike Sports Kit connected. Everything was going smoothly when suddenly the song I was liste
-
Missing information in infotype organisational assignment.
Hi, Working in personal administration. For a particular employee,a particular info is absent in the infotype organisational assignment when we run it but when infotype actions is being run,it is present. The requirement is to bring the missing info
-
When i updated OS X Mavericks i got restart problems, help me to fixed it
panic(cpu 1 caller 0xffffff7f8a394fb0): "GPU Panic: [<None>] 5 3 7f 0 0 0 0 3 : NVRM[0/1:0:0]: Read Error 0x00100c80: CFG 0xffffffff 0xffffffff 0xffffffff, BAR0 0xd2000000 0xffffff80a791a000 0x0a5480a2, D0, P3/4\n"@/SourceCache/AppleGraphicsControl/A
-
How can i include Services and Bindung in a generated WSDL file?
Hi, i what to use a generated wsdl file from an erp system, to build a web service client with WSDL2Java (org.apache.axis.wsdl.WSDL2Java). I noticed, that services an bindings are missing, also a policy is included. How can i include services and bin
-
Can you make a column in atable invisible
Hi, I am using the defaulttablemodel to display my table. The data are in a vector which are sorted in descending order based on a column. Is it possible to make a column in a table invisible. The reason is that I need to sort my table based on a par