Installing Photoshop on Mac Pro

I have purchaed and attempted to download PhotoshopElements. None of my attempts seems to have worked since when I try to install the program I get error messages, such as it is damaged, there is no program to open it with, etc. I've read some of the suggestions for resolving instulation problems, such as deselecting in the energy saver. Feeling pretty frustrated.

Which version of the PSE and on which OS you are on ?
Also from where exactly are you downloading the software and what's the exact error message you get?

Similar Messages

" help me please" I have Windows 7 installed on my mac pro and Bought Mini DisplayPort to VGA Adapter to connect to lcd tv But it does not work? why? please help me

" help me please" I have Windows 7 32 bit installed on my mac pro and Bought Mini DisplayPort to VGA Adapter to connect to lcd tv But it does not work? why? please help me
I have to boot with a Windows
When I use the Mac operating system not have a problem and DisplayPort to VGA Adapter Working properly
why does not work with windows ?
What should I do؟
I'm grateful to give advice
tanks
[email protected]

Someone in another section answered this. Thanks.

How many Sapphire Sapphire RADEON R9 270X can i install in my mac pro 2009?

How many of the graphics cards can I install in my mac pro 2009? Sapphire Sapphire RADEON R9 270X
Thanks

Why? do you use FCP-X? that will benefit from two. Also gaming in Windows where you can use Crossfire
You have two 6-pin power feeds so you will need a small 450W PSU - those come with two 8-pin and two 6-pin.
Those can often fit in the optical drive bay and cost $25-75 range.
"500W" is NOT for the card! that is the minimum PC PSU only!
when buying look for card that uses only two 6-pin and not an 8-pin power.
75W for the PCIe slot, and 150W from two 6-pin cables, most GPUs fall into the 200-250W at maximum stress levels8-pin is basically two 6-pins and 150W feed
> we CrossFired a pair of Radeon R9 270s in our 2010 Mac Pro tower. Under Windows 7 64bit Ultimate, it registered 145 FPS in the Diablo test.
http://barefeats.com/tube06.html
Keep in mind that the Mac Pro tower can't feed enough power to the dual 980s, dual 290Xs, or dual 7950s.
We used an auxillary power supply to compensate.
For the hard core GPU rendering, there are external expansion boxes with their own power supplies.
In an earlier article, we featured the Cubix Xpander which facilitated the connection of 5 GPUs to the Mac Pro tower.
If you favor an AMD GPU like the Radeon R9 290X, MacVidCards can modify it to run at PCIe 2.0 bandwidth in your Mac Pro tower.
The Sapphire Radeon R9 7950 Mac Edition is available from OWC and TransIntl.
February 6th, 2015 -- Dual GeForce GTX 980s vs other Dual GPUs running multi-gpu 'aware' apps
February 6th, 2014 -- (UPDATE) GeForce GTX 980 GPU versus 8 other GPUs running Games and OpenGL Benchmarks
January 29th, 2015 -- GeForce GTX 980 vs 9 other GPUs running Resolve, LuxMark, and Octane Render
December 28th, 2013 -- Does Final Cut Pro X 10.1 render faster on Mac Pro towers with Dual AMD GPUs? What about Motion 5.1?
Things to keep in mind:
The Radeon R9 280X we used was 'un-flashed.' It booted OS X fine but there was no startup screen. Also, when we checked the speed of CPU-to-PCIe-to-CPU communication, it appeared to be running in PCIe 1.0 mode instead of PCIe 2.0. However, unless the GPU intensive app saturates the PCIe 1.0 bandwidth, it will not run any faster in PCIe 2.0 mode. http://barefeats.com/tube12.html
Which is one reason why you might want to buy pre-modified cards from http://www.macvidcards.com

I have adobe design std. 6 i wanted to install photoshop and acrobat pro on my windows xp sp3

i have adobe design std. 6 i wanted to install photoshop and acrobat pro on my windows xp sp3. i am not able to install acrobat it is showing folowing error. my email id is [email protected]
Exit Code: 6
Please see specific errors and warnings below for troubleshooting. For example, ERROR: DW050 ... WARNING: DW024, DW065 ...
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 3 error(s), 2 warning(s)
WARNING: DW024: The payload: {9124DF4E-617D-486B-A970-8FA632244F24} Adobe Photoshop CS6 Core 13.0.0.0 requires a UI parent with following specification:
Family: Photoshop
ProductName: Adobe Photoshop CS6 Core_x64
This parent relationship is not satisfied, because this payload is not present in this session.
WARNING: DW065: Display requirements not met for {0327A4BF-62BF-48BB-8928-B971B749E9E1} Creative Suite 6 Design Standard 6.0.0.0
----------- Payload: {AC76BA86-1033-F400-7760-000000000005} Acrobat Professional 10.0.0.0 -----------
ERROR: Error 1406.Could not write value DisableExceptionChainValidation to key \SOFTWARE\Microsoft\Windows NT\CurrentVersion\Image File Execution Options\Acrobat.exe. Verify that you have sufficient access to that key, or contact your support personnel.
ERROR: Install MSI payload failed with error: 1603 - Fatal error during installation.
MSI Error message: Error 1406.Could not write value DisableExceptionChainValidation to key \SOFTWARE\Microsoft\Windows NT\CurrentVersion\Image File Execution Options\Acrobat.exe. Verify that you have sufficient access to that key, or contact your support personnel.
ERROR: DW050: The following payload errors were found during install:
ERROR: DW050: - Acrobat Professional: Install failed

Hi Rizwan,
Please refer the Kb Doc : http://helpx.adobe.com/creative-suite/kb/error-exit-6-exit-7.html.
Please see Troubleshoot with install logs | CS5, CS5.5, CS6 - http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5 -cs5.html for information on how to review your installation logs

WinXP Home install problems on Mac Pro

Hi,
I have a brand new Mac Pro Dual 2.66GHz. It came with a second GeForce 7300GT installed. I installed additional 2x 1GB FB DIMMs. Everything worked fine, and I installed all new updates, including the new EFI Firmware update Apple introduced yesterday. After the OS X setup was complete, I downloaded BootCamp 1.1.2 and followed the instructions to create a 30GB partition for Windows XP Home. I insert the WinXP CD and let BootCamp restart the computer. WinXP boots and the blue screen appears and a bunch of drivers get loaded. After that I get the first install screen, and on that point the keyboard is not responding anymore. I can press "return" as often as I want, the install does not start. It also not responds to F3 or R as written on the screen. Its the first time Windows gets installed on this Mac Pro. I also tried to connect the keyboard directly to the computer (before it was on the cinema display hub). I tried to remove the RAM to have only the standard 1GB RAM installed. Nothing worked.
Anyone have a hint to get this done? Thanka a lot on advance!
Marty

I already thougt about that, but Apple put a note on the page:
http://www.apple.com/support/downloads/firmwarerestorationcd12.html
"Note: This CD cannot be used to return an Intel-based Macintosh computer’s firmware to a previous version if a successful update has already been performed."
So because I did a successful fimware update, I can not go back to the old firmware! There is no way back!

ATI FirePro V9800 work with Mac OS X? Can be installed on a Mac Pro 8 Core 2011?

ATI FirePro V9800 work with Mac OS X? Can be installed on a Mac Pro 8 Core 2011?

I hv tried installed FirePRO V5800 on 2012 MAC PRO ,no luck
* hear boot chime but no display output

Trying to install Mavericks on Mac Pro series 4,1

Hi all,
I'm trying to install Mavericks on Mac Pro series 4,1 After downloading from App Store, when computer restarts I get grey screen with the "no entry" sign. I have checked compatibility and this model qualifies for Mavericks. Tried a clean install of 10.6.8 first, but no luck. Any ideas?
The Mac has single quad core 2.66, 6 Gb RAM, NVIDIA GeForce GT120 graphics. Four hard drives. Three Pro Tools HD cards in PCIe slots.
I also tried this with Mountain Lion, with the same results.

Didn't have any luck with removing PCI cards, BUT................ here's how I resolved the issue:
I tried making a USB stick installer. That also failed, but I noticed it couldn't find any hard drives.
I did a search about OSX installer not finding drives and found someone who had that issue and it turned out to be a conflict with the WIFI card (Atheros, not the more common Broadcom)
I checked my System Profiler and sure enough, I have the Atheros.
I just removed the WIFI card and booted into OSX Installer (it was still there after the failed install) and successfully installed Mavericks.

I have Outlook 2011 installed on my Mac Pro, but I can not install it icloud. I can only get through imail, iCal and Address Book in Mac native anyone know teach me how to work with Outlook 2011 icloud? thank you

I have Outlook 2011 installed on my Mac Pro, but I can not install it icloud. I can only get through imail, iCal and Address Book in Mac native anyone know teach me how to work with Outlook 2011 icloud? thank you

"iCloud requires iOS 5 on iPhone 3GS or later, iPod touch (3rd and 4th generation), iPad, or iPad 2; a Mac computer with OS X Lion; or a PC with Windows Vista or Windows 7 (Outlook 2007 or 2010 or an up-to-date browser is required for accessing email, contacts, and calendars). Some features require a Wi-Fi connection. Some features are not available in all countries. Access to some services is limited to 10 devices."
From here > http://www.apple.com/icloud/

I use my own color profiles from Photoshop CS6/Mac Pro - how do I turn of Epson Artisan 837 printer color management?

I use my own color profiles from Photoshop CS6/Mac Pro - how do I turn of Epson Artisan 837 printer color management?

Choose Photoshop Manages Color in the CS6 print dialogue. At the top, click the Print Settings button and disable any color management settings for the printer.
Edit: Correction, that's CS6 in Snow Leopard. In Mountain Lion, if you check the print settings, color management for the printer should automatically be disabled when using Photoshop Manages Color.

Photoshop CS2 Trial Install Crash on Mac Pro

Well, I've seen the benchmark sites running Photoshop CS2 on a Mac Pro, but when I try to install the trial version, it crashs during the install process. I tried re-installing Mac OS X and re-installing Photoshop first thing, but with the same result.
A search only brought up a previously known issue with QuickTime 7.1, but the fix was to update to 7.1.1 - since my install has QT 7.1.2 this doesn't seem applicable.
Doom3 is the only other Rosetta app I've tried, and it runs fine - heck, I didn't even initially realize that the demo is the PPC-only version.
Has anyone else gotten it successfully installed? I don't want to spring out the cash for the full thing until I know it works (and I want to test out the Kodak Digital ROC plug-in to make sure it works as well.)
(I'm asking here since my lack of search results leads me to think it might be Mac Pro specific.)
Take care,
P.M.
Mac Pro Mac OS X (10.4.7) (2.66/160GB/7300GT/2GB/BT + 250GB PATA drive)

This worked for me....
Restart
During restart, hold Ctrl + Command + P + R to reset the PRAM
After this, the computer will flash and reboot again and should boot into the Mountain Lion Installer.
Good luck.

Since installing Maverick my Mac Pro freezes at least once a day, any advice?.

Since installing OS Maverick my Mac Pro is freezing at least once a day. I can not access 'Force Quit' via shortcut and have to force a shutdown. This has occured when using Firefox, so i tried Safari and Chrome, freezes using all three. It has happened while use software as well eg, Photoshop and Word.
I have installed and run AVG Anti Virus and done a full system check to ensure that there was no virus etc.... all was clear.
I am assuming that it is a bug within Maverick as i experienced none of these problems prior to its installation.
Is anyone else experiencing these issues and does anyone have any advice on prevention?

Firstly, uninstall any anti-malware software. It isn't needed and could cause your problem. Also, avoid using Chrome which can also cause problems. Never use more than one browser at a time. Using three is asking for disaster.
I've been using Mavericks on all my computers and have had no problems, so what you describe is unlikely to be a bug. Start by uninstalling the AV software using their uninstaller. Disconnect all third-party peripherals. Then try the following:
Fixing a Mavericks Installation Problem
How to manage a failed OS X Mavericks installation | MacFixIt - CNET Reviews.
Try these in order:
1. a. Resetting your Mac's PRAM and NVRAM
    b. Intel-based Macs: Resetting the System Management Controller (SMC)
2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
     Boot to the Recovery HD: Restart the computer and after the chime press and hold down the
     COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the computer and
     after the chime press and hold down the OPTION key until the boot manager screen appears.
     Select the Recovery HD and click on the downward pointing arrow button.
3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
4. Reinstall Lion/Mountain Lion, Mavericks: Reboot from the Recovery HD. Select Reinstall Lion/Mountain Lion, Mavericks from the Utilities menu, and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

Won't install Photoshop and Acrobat Pro

My macbook recently crashed and I have had to reload my Adobe software onto a new hard drive. I am able to install everything except for Photoshop and Acrobat Pro. I've gone through all of the troubleshooting documents in regards to the exit error (6) to no avail. I think I've installed and uninstalled the suite about 18 times now trying different solutions.
Below is the latest error readout from the installation. If anyone can present a solution it would be much appreciated. I really need these programs for work.
Exit Code: 6
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 13 error(s), 7 warning(s)
WARNING: DW031: Payload:{6A2E619B-E4AC-433B-A648-D458CE543A96} Adobe XMP Panels CS5 3.0.0.0 has been updated and has been selected for repair. The patch {5C0FEBDA-5A0E-4FC8-91CB-229A4C1561E9} Adobe XMP Panels CS5_3.1_AdobeXMPPanelsAll 3.1.0.0 will be uninstalled now.
WARNING: DW031: Payload:{3F023875-4A52-4605-9DB6-A88D4A813E8D} Camera Profiles Installer 6.0.0.0 has been updated and has been selected for repair. The patch {A189C479-C7CD-4E08-8CCF-D999B68C0C71} Camera Profiles Installer_6.3_AdobeCameraRawProfile6.0All 6.3.0.0 will be uninstalled now.
WARNING: DW031: Payload:{37AB3C65-E02C-4DCF-B0E0-4C2E253D8FA3} Photoshop Camera Raw 6.0.0.0 has been updated and has been selected for repair. The patch {FD58D99B-9927-4226-8E00-959A4F76BD89} Photoshop Camera Raw_6.3_AdobeCameraRaw6.0All 6.3.0.0 will be uninstalled now.
WARNING: DW031: Payload:{6A2E619B-E4AC-433B-A648-D458CE543A96} Adobe XMP Panels CS5 3.0.0.0 has been updated and has been selected for repair. The patch {5C0FEBDA-5A0E-4FC8-91CB-229A4C1561E9} Adobe XMP Panels CS5_3.1_AdobeXMPPanelsAll 3.1.0.0 will be uninstalled now.
WARNING: DW031: Payload:{3F023875-4A52-4605-9DB6-A88D4A813E8D} Camera Profiles Installer 6.0.0.0 has been updated and has been selected for repair. The patch {A189C479-C7CD-4E08-8CCF-D999B68C0C71} Camera Profiles Installer_6.3_AdobeCameraRawProfile6.0All 6.3.0.0 will be uninstalled now.
WARNING: DW031: Payload:{37AB3C65-E02C-4DCF-B0E0-4C2E253D8FA3} Photoshop Camera Raw 6.0.0.0 has been updated and has been selected for repair. The patch {FD58D99B-9927-4226-8E00-959A4F76BD89} Photoshop Camera Raw_6.3_AdobeCameraRaw6.0All 6.3.0.0 will be uninstalled now.
----------- Payload: {AC76BA86-1033-F400-7760-000000000005} Acrobat Professional 10.0.0.0 -----------
ERROR: DW006: Apple Package failed to install successfully.
----------- Payload: {08EF22BC-43B2-4B4E-BA12-52B18F418F38} Adobe Photoshop CS5.1 Core 12.1.0.0 -----------
ERROR: DF027: Unable to copy file from "/private/tmp/.tempdir7Bl9i41Q/Assets1/Application/Presets/Scripts/Lens Correct.jsx" to "/Applications/Adobe Photoshop CS5.1/Presets/Scripts/Lens Correct.jsx" Error 0(Seq 2523)
ERROR: DW063: Command ARKCopyFileCommand failed.(Seq 2523)
ERROR: DF037: Unable to delete directory "/Applications/Adobe Photoshop CS5.1/Presets/Scripts"(Seq 2514)
ERROR: DW063: Error rolling back command ARKCreateDirectoryCommand(Seq 2514)
ERROR: DF037: Unable to delete directory "/Applications/Adobe Photoshop CS5.1/Presets"(Seq 2125)
ERROR: DW063: Error rolling back command ARKCreateDirectoryCommand(Seq 2125)
ERROR: DF037: Unable to delete directory "/Applications/Adobe Photoshop CS5.1"(Seq 1)
ERROR: DW063: Error rolling back command ARKCreateDirectoryCommand(Seq 1)
WARNING: DW036: Payload cannot be installed due to dependent operation failure
ERROR: DW050: The following payload errors were found during install:
ERROR: DW050: - Adobe Photoshop CS5.1 Core: Failed due to Language Pack installation failure
ERROR: DW050: - Acrobat Professional: Install failed
ERROR: DW050: - Adobe Photoshop CS5.1 English Language Pack_AdobePhotoshop12-en_US: Install failed

Kornari you have multiple file permission errors listed within your installation log summary. They are as follows:
ERROR: DW063: Command ARKCopyFileCommand failed.(Seq 2523)
ERROR: DF037: Unable to delete directory "/Applications/Adobe Photoshop CS5.1/Presets/Scripts"(Seq 2514)
ERROR: DW063: Error rolling back command ARKCreateDirectoryCommand(Seq 2514)
ERROR: DF037: Unable to delete directory "/Applications/Adobe Photoshop CS5.1/Presets"(Seq 2125)
ERROR: DW063: Error rolling back command ARKCreateDirectoryCommand(Seq 2125)
ERROR: DF037: Unable to delete directory "/Applications/Adobe Photoshop CS5.1"(Seq 1)
ERROR: DW063: Error rolling back command ARKCreateDirectoryCommand(Seq 1)
You can find information on how to adjust your file permissions on the affected directories in the link provided by Sheena in message #1. If you continue to receive the same errors then it may not be possible for your current User account to affect the required file permissions.
In this case then please try installing under a newly created User account. You can find more information at Install or run Adobe applications in new user account | Mac OS X.

Will Leopard be installed on new Mac Pros?

I plan on purchasing an 8-core, pretty much any day now.
If I wait 2 weeks, will a new 8-core purchase have Leopard installed? Do I want it to?

Nathan,
I was forced into an emergency transition from a G5 to my Mac Pro 8 Core. While no data was lost (power problem and not hard drive related) I had no time to deactivate any pro apps. My apps that most concerned me were Photoshop CS3 and Final Cut Studio. In both cases, and nearly all others, I thought (and had corroborating advice) it best to install each application freshly, and make no use of the Migration Assistant to move applications. Data was transferred w/o the Migration Assistant, simply by placing the hard drives from the G5 into the Mac Pro, and doing transfers in the Finder.
Since Logic (which I have not used) is UB, you have the choice to simply install it onto the Mac Pro either while it boots on Tiger, or if running on Leopard.
I think you could easily transition directly to Leopard, and skip running Tiger ever on the Mac Pro. However, I will be maintaining a boot drive for each, and will want to keep the ability to run in either. If you will still have the G5 to use, that may not be as needed for you.
I have had no shocks on running with the Mac Pro vs G5, but was really careful about the installation of applications. Data transfer was not an issue for me, as it went smoothly. Planning the use of four internal HD has been a fun challenge.
Ernie

How many hard drives can i install in my mac pro

How do I know what size hard drives I can install? I currently have 4 x 2TB drives installed and am looking to go bigger. 4 x 4TB would be ideal and if you have suggestions on which drives might give me best performance for HD video editing that would be nice too.
Also can I install more RAM?
ere is some information to help.
Mac Pro
Early 2008
Processor 2 x 2.8 GHz Quad-Core Intel Xeon
Memory 16 GB 800 MHz DDR2 FB-DIMM
Graphics 2 x NVIDIA GeForce GT 120 512 MB
Software Mac OS X Lion 10.7.3 (11D50b)
Model Name:          Mac Pro
Model Identifier:          MacPro3,1
Processor Name:          Quad-Core Intel Xeon
Processor Speed:          2.8 GHz
Number of Processors:          2
Total Number of Cores:          8
L2 Cache (per Processor):          12 MB
Memory:          16 GB
Bus Speed:          1.6 GHz
Boot ROM Version:          MP31.006C.B05
SMC Version (system):          1.25f4
Serial Number (system):          G************
Hardware UUID:          47DF4954-C493-50B8-85F3-FC381FA75AD6

PCIe SSD controller
www.macperformanceguide.com
That would be $1600 for your 16TB
There are kits to put 2.5" drives (4) in lower optical drive bay. Some WD 10K VR 500GB and 1TB ($200 and $300, 200MB/sec)
32GB 8 x 4GB FBDIMM 800MHz
GTX 570 w/ 10.7.3 from MacVidCards

Would an Airport Extreme card newly installed in a Mac Pro require Leopard?

Hello friends,
Yesterday I went to the Apple store and had them install an Airport Extreme card in my Mac Pro. The airport is found, activated, and works for a computer-to-computer network between the Mac Pro and a Macbook. However, it doesn't find any other wireless networks, even though the laptop is right next to it and detects them fine.
I am wondering if perhaps the Airport card I got is not compatible with OS X 10.4.11 and that I require 10.5.x for it to work.
Alternatively, whether there is some configuration tweaking I can do to get it working.
The Airport card is described in System Profiler as follows:
Wireless Card Type: Airport Extreme (0x14E4, 0x88)
Wireless Card Locale: USA
Wireless Card Firmware Version: Broadcom BCM43xx 1.0 (4.170.46.9)
Thank you for any help. Pretty frustrated; have a slow wi-fi connection here anyway and can't even get cell reception at the site so it's hard to research the problem!
- nick

Not sure what you mean "configure by ethernet."
Do you mean to connect the computer to the wireless base via ethernet to configure the computer's network settings for that network, and then have the wifi card ride those settings?
Do you have any idea whether OS X 10.5.x is required with the latest airport cards?
Thx
-nick

Installing Photoshop on Mac Pro

Similar Messages

Maybe you are looking for