Installing plugin software - Photoshop says failed

Hello - I got the new iMac and I am trying to transfer software over into the new system. I dug through my drawer of all the stuff I've purchased over the years. I am using Photoshop CS3 with no problems expect for trying to get this software in. I was using the same setup on my old computer and never had this problem. My example, is that I have Auto FX Mystical Tint Tone and Color which has an installer. I run it. It says everything was fine. PS was not on while I did the setup. Found the proper plugin folder - everything seemed great. There are 5 other titles that I did this all with. When I start PS, is says they failed.This also happened when I tried to reinstall my scanner. I have the latest drivers and also tried installing from the original CD. It will not work in PS and it did on my old computer. I have restarted my computer - with no change. Help! What am I doing wrong here?
Here is the list that failed:
Plug-ins that failed to load:
   DreamSuite NO VERSION - OS 9 Plug-In Not Supported - from the file “/Applications/Adobe Photoshop CS3/Plug-Ins/DS_PlugIn.8bf”
   MTTC       NO VERSION - OS 9 Plug-In Not Supported - from the file “/Applications/Adobe Photoshop CS3/Plug-Ins/MTTC_PlugIn.8bf”
   Mystical   NO VERSION - OS 9 Plug-In Not Supported - from the file “/Applications/Adobe Photoshop CS3/Plug-Ins/ML_PlugIn.8bf”
   PGE 6.0    NO VERSION - OS 9 Plug-In Not Supported - from the file “/Applications/Adobe Photoshop CS3/Plug-Ins/PGE/PGE_PlugIn.8bf”
   ScanGear CS 8.2.7X NO VERSION - - from the file “/Applications/Adobe Photoshop CS3/Plug-Ins/Import:Export/ScanGear CS 8.2X”
   onOne Library NO VERSION - - from the file “/Applications/Adobe Photoshop CS3/Plug-Ins/onOne Library.8li”
I am really afraid to continue installing all my stuff - if nothing is going to work. I don't want to waste another 2 hours if possible ....

If you just got a new Mac its most likely an Intel Mac.
Your old plugins are probably for a PowerPC Mac.
The intel Mac applications need to be written in a different language than PPC.
Your old plugins will work if you start Photoshop in Rosetta (PPC emulation) but you will take a big speed hit. You need to contact the manufacturers of your plugins and see if they make a new version for the Intel Mac. this may cost to get the upgrade.

Similar Messages

HT1199 My mac has OSX version 10.8.2 and I'm try to install an aiport express base station which requires 10.5.7 or later. Yet when I try to install the software it says the base station is not compatible with my mac version - how do I resolve?

My mac has OSX version 10.8.2 and I'm try to install an aiport express base station which requires 10.5.7 or later. Yet when I try to install the software it says the base station is not compatible with my mac version - how do I resolve?

You already have the software installed that you need if you have 10.8.2.
If AirPort Utility cannot find the Express, that is another matter. More software is not needed. More troublehooting is needed.
Power up the Express for a full minute
Hold in the reset button on the Express for 7-8 seconds and release
Allow a full minute for the Express to restart
Click the AirPort icon at the top of the Mac's screen
Look for a heading of New AirPort Base Station
Just below that, click on AirPort Express
What happens?

HT1151 I keep getting an error message when installing new software that says "System extension cannot be used /system/library/extension/IoFireWireWDHID.kext was installed improperly" I have no idea what this means and all of my software seems to install

I keep getting an error message when installing new software that says "System extension cannot be used /system/library/extension/IoFireWireWDHID.kext was installed improperly" I have no idea what this means and all of my software seems to install okay

Hello Valerie Anderson,
I'm Harry from Norton Support team. Please check the information provided in a similar thread here:
https://discussions.apple.com/message/21854775#21854775
Let me know if this helps.
Thanks!
Harry

Hi, i updated my OS to mavericks but i cannot install the software, it says my S.M.A.R.T. drive has errors, what do i do?

hi, i updated my OS to mavericks but i cannot install the software, it says my S.M.A.R.T. drive has errors, what do i do?

Hi
Try to delete all content (format by clean install), then you can install Mavericks, however I think its better to add mavericks into External fladh drive (USB)
to do clean install"
the language in the screenshot is Swedish which is same in English "Radera= delete), make sure you do back up first for you photos, music, documents,,,,,etc.

Software install from software center is failing

Hi, We have a application install that is failing when trying to install from software center. Its a straightforward .msi install.
Which log file would we look at to see why the application install is failing?
Thanks
Thanks Lance

Hi,
Please see AppEnforce.log and AppDiscovery.log if the installation already started.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

How do i install plugins in photoshop cc?

Dumb question, I know.. But I'm a newbe ... How do I install plug-ins into photoshop cc?

If the plugin is a ZXP file, you should use Extension Manager CC to install it.

How to install Plugins for Photoshop Elements 11

I want to install a Photoshop Plug In
Were I get them?
How to install them?
My OS: Win 7
I´ve PSE11
Greets from Germany

you need to place your plugins in the folder C:\Program Files (x86)\Adobe\Photoshop Elements 11\Plug-Ins
You can make folders inside the Plug-Ins folder to maintain the hierarchy of plug-ins
check the help document on plugins here; http://helpx.adobe.com/photoshop-elements/using/scratch-disks-plug-ins.html#about_plug_in_ modules

Issue accessing installed plugins under Photoshop 64 Bit CS5

I downloaded this file from the adobe site PSCS5OptionalPlugins_Win_en_US which are the optional plugins for 64bit version under VISTA BIZ edition. I followed the instructions explicitly however I cannot access the supported plug-ins. Can anyone help with this issue?
By the way I also followed the OneOnOne Software Photo Effects instructions and cannot no matter how hard I try access the plug-in....ps. all the plugins are visible in the appropriate directories!

Thought I would send you additional information about the system
Adobe Photoshop Version: 12.0.4 (12.0.4x20110407 [20110407.r.1265 2011/04/07:02:00:00 cutoff; r branch]) x64
Operating System: Windows 7 64-bit
Version: 6.1
System architecture: Intel CPU Family:6, Model:5, Stepping:2 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2
Physical processor count: 4
Processor speed: 2128 MHz
Built-in memory: 3885 MB
Free memory: 1610 MB
Memory available to Photoshop: 3283 MB
Memory used by Photoshop: 60 %
Image tile size: 128K
Image cache levels: 4
OpenGL Drawing: Enabled.
OpenGL Drawing Mode: Basic
OpenGL Allow Normal Mode: True.
OpenGL Allow Advanced Mode: False.
OpenGL Crash File: Not Detected.
OpenGL Allow Old GPUs: Not Detected.
Video Card Vendor: Intel
Video Card Renderer: Intel(R) HD Graphics
Display: 1
Display Bounds:= top: 0, left: 0, bottom: 768, right: 1366
Video Card Number: 1
Video Card: Intel(R) HD Graphics
Driver Version: 8.15.10.2361
Driver Date: 20110410000000.000000-000
Video Card Driver: igdumd64.dll,igd10umd64.dll,igdumdx32,igd10umd32
Video Mode: 1366 x 768 x 4294967296 colors
Video Card Caption: Intel(R) HD Graphics
Video Card Memory: 1718 MB
Serial number: 91198997390687115230
Application folder: C:\Program Files\Adobe\Adobe Photoshop CS5 (64 Bit)\
Temporary file path: C:\Users\Marion\AppData\Local\Temp\
Photoshop scratch has async I/O enabled
Scratch volume(s):
Startup, 451.1G, 280.7G free
Primary Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS5 (64 Bit)\Plug-ins\
Additional Plug-ins folder: not set

Hi, after installing Adobe CC I tried opening Adobe Photoshop. This failed. I get the opening window where it says installing plugins searching etc, after which PS opens in full screen. Just moments after that there's a fail warning, no code number, only

Hi, after installing Adobe CC I tried opening Adobe Photoshop. This failed.
I get the opening window where it says installing plugins searching etc, after which PS opens in full screen.
Just moments after that there's a failure warning, no code number, only the warning that PS failed to open and PS will close.
I tried downloading it for a second time, but this did'nt solve the problem.
Befor the CC version I used a one year student version of Adobe CS6.
What can I do?

Regarding the Flash Player problem, disable Hardware Acceleration to circumvent driver incompatibilities.
Regarding the Flash Pro installation problems, post in the Flash forums or http://forums.adobe.com/community/download_install_setup

When i try installing photoshop from adobe creative cloud it says: fail on update, try again, i try again and says the same

When i try installing photoshop from adobe creative cloud it says: fail on update, try again, i try again and says the same, any help?

Try this link; follow the instructions carefully: Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
And also a troubleshooting page: https://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html
Benjamin

My Mac will not let me install any software I download. In some cases (Like quicktime) i get a message that says "Can't create the folder" I have it with adobe air and its creating all sorts of issues. My software is up to date and I have 10.8.2.

A whole bunch of issues here.
I can't install any software. It started when iPlayer stopped working at all. This led me to try to update software versions such as Adobe Air to 3.5 (Failed) then quicktime player 7.6.6 as recommended (Failed) then the printer packed up and I have tried to install the downloaded software drivers for Canon from the Apple site (Failed again)
In all cases they let me download so I have the file, but not install.
Quicktime tells me it can't install a file "/var/folders/15....then a long string of numbers....ending in T//install.1347YKihUc".
The Canon Print Driver has a very similar message.
Adobe Air says "An error occurred whilst installing....contact my administrator" which is me and I am fine with it ;-)
Remember this all started because my iPlayer (and my printer) just stopped working and I have been trying to fix those.
I am a bit techy but not much.
Can anyone assist?
Many Thanks.
Fozzie65

I have Firefox 3.6.6, and now that Firefox 4.0 is available, it crashes constantly. Sometimes less than 5 minutes after I open it. I have a Mac 10.4.11, so Firefox 4.0 isn't an option for me. When I asked Ff to check my plug-ins it said there was an error and to check back later. Twice.
Because I didn't have any (any) problems with my Ff before the upgrade became available, I am forced to question if Ff has done something to make the earlier version crash so you'll upgrade, but I can't afford to upgrade my Mac right now.
In the meantime, I do need a browser that works! I dislike Safari, Chrome is also not available on Mac 10.4.11, and Explorer is just plain not available on Mac.
Do you have any suggestions on how to fix my Firefox 3.6.6?
Ty

I AM TRYING TO INSTAL THE ADOBE PHOTOSHOP ELEMENT 10, BUT IT COMES A NOTE SAYING TO GET THE ADOBE SUPPORT ADVISOR, I TRIED THEY SAY IT HAS BEEN DISCONTINUED, I BOUGHT THE LICENSE AND A NEW APPLE COMPUTER AND NEED TO INSTAL IT,

I AM TRYING TO INSTAL THE ADOBE PHOTOSHOP ELEMENT 10, IN A NEW APPLE COMPUTER, BUT IT COMES A NOTE SAYING THAT THE INSTALATION WAS NOT ABLE TO INITIALIZE, AND THAT I SHOULD DOWNLOAD THE ADOBE SUPPORT ADVISOR TO DETECT THE PROBLEM. I DID IT BUT IT SAYS THAT IS HAS BEEN DISCONTINUED,

start at the top and work your way down applying applicable fixes until your problem is resolved.
if cc (win): https://helpx.adobe.com/creative-cloud/kb/creative-cloud-desktop-application-failed.html
if, your error is:
"Installer failed to initialize. File not found." or "Installer failed to initialize. This could be due to missing files."
first, rename OOBE Folder to OOBE.old.
to find OOBE:
64 bit win OS: Program Files x86\Common Files\Adobe\OOBE
32 bit win OS: Program Files \Common Files\Adobe\OOBE
mac os: HD>library>application support>adobe>caps
mac os: USER>library>application support>adobe>OOB
if that fails or isn't the exact error you see, uninstall, clean (http://www.adobe.com/support/contact/cscleanertool.html) and reinstall.
if you're using a dvd to install:
copy the disc contents to a desktop directory and install from that directory.
if you're using a mac:
1. Try to Create a new user account in Mac with Administrator Priviledges.
2. Login to the New user, Navigate to Mac HD> Application> Utilities> Adobe Installer folder, Locate products like Adobe Reader, Adobe Flash, Adobe Air and un-install them
3. Navigate to User Library> Application Support> Adobe and move Adobe to Trash.
4. Navigate to Mac HD> Library> Application Support> Adobe and move Adobe to Trash.
5. Start the installation again.
if everything applicable above fails, check your installation logs:
http://helpx.adobe.com/photoshop-elements/kb/troubleshoot-install-using-logs-elements.html

I have iWork 09 with a family license. I am unable to install the software on my new Macbook Pro (the message is simply "Installation failed"). I wonder if I need to remove an old computer from the family license, and if so, how?

I have iWork 09 with a family license. I am unable to install the software on my new Macbook Pro (the message is simply "Installation failed"). I wonder if I need to remove an old computer from the family license, and if so, how?

Yes, gladly. I am trying to install on a 13" MacBook Pro with OS X 10.8.3. I insert the disk into the SuperDrive. The I work '09 window pops up with two icons: one Tim install and one that says "Read before you install iWork." I double-click on the "Install iWork '09" icon, and a window appears that says, "This package will run a program to determine if the software can be installed." I click "continue" and see "Welcome to the iWork '09 installer." I click on "Continue." The "read me" bullet on the left lights up, and I see "Read before you install. . . ." I click "Continue," then see the software license agreement. When I click on "Continue" again, I am asked to agree, and I do. The window then says, "Standard Install on 'Mackintosh HD" and indicates how much space the program will take.
I click "Install," enter my password, and the installation begins. It goes through a validating phase and begins "writing files." It indicates that installation will take about 30 minutes (although that number fluctuates). After about four minutes it goes to "cleaning up." Then after just a few seconds, the "Summary" bullet on the left lights up and this message appears: "There were errors with the installation. You may want to try installing again." There is a large yellow triangle with an exclamation point in it, and a bold "The installation failed." Below that appears "The installer encountered an error that caused the installation to fail. Contact the software manufacturer for assistance."
At that point, a "Close" button is pulsating blue at the bottom of the window.
Sorry for the tedious detail. Anything revealing there?
Thanks!

Software update says I need to do the lastest update which I have tried to do at least 6 times. It downloads the software, the computer restarts, it starts to finish the download and then says ' there was an error in installing the software" What is up?

Software update says I need to download MacOS 10.6.7. Each time I try, I have tried 6 times, the software downloads, it has me restart the system, it then writes the files to disk and then I get an error measage that "there was error in installing the softare. Anybody have this problem and how do you fix it? I am running 10.6.6

Try this before trying to install the update.
Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
If you still have a problem then I suggest you download the 10.6.7 Combo Updater and install it.

IE11 SCCM 2012 Deployment - says installed in software center but after re-boot IE8 Remains

Hello,
I have an issue deploying IE11 to the estate, on the pc's the package says installed in software centre but when the users re-boot it's still IE8 on the machine.
The monitoring tool in SCCM 2012 console lists the install as successful.
I have the appenforce log from one of the machiens with the issue:
Starting Install enforcement for App DT "Internet Explorer 11 - Windows Installer (*.msi file)" ApplicationDeliveryType - ScopeId_F26B70A7-1D38-41D7-AF12-4D44AF3EDFED/DeploymentType_ee666887-31c1-4b60-837d-b7ce84e496c3, Revision - 1, ContentPath
- C:\Windows\ccmcache\19, Execution Context - System AppEnforce 28/01/2015 12:30:53 6512 (0x1970)
    A user is logged on to the system. AppEnforce 28/01/2015 12:30:53 6512 (0x1970)
    Performing detection of app deployment type Internet Explorer 11 - Windows Installer (*.msi file)(ScopeId_F26B70A7-1D38-41D7-AF12-4D44AF3EDFED/DeploymentType_ee666887-31c1-4b60-837d-b7ce84e496c3, revision 1) for system. AppEnforce 28/01/2015
12:30:53 6512 (0x1970)
+++ MSI application not discovered [MSI Product Code: {86DC0963-2A1C-42AB-B664-17C12DBF6C6D}, MSI Product version: ] AppEnforce 28/01/2015 12:30:53 6512 (0x1970)
    App enforcement environment:
Context: Machine
Command line: msiexec /i "IE11-Setup-Full.msi" /q
Allow user interaction: No
UI mode: 0
User token: null
Session Id: 4294967295
Content path: C:\Windows\ccmcache\19
Working directory: AppEnforce 28/01/2015 12:30:53 6512 (0x1970)
    Prepared working directory: C:\Windows\ccmcache\19 AppEnforce 28/01/2015 12:30:53 6512 (0x1970)
Found executable file msiexec with complete path C:\Windows\system32\msiexec.exe AppEnforce 28/01/2015 12:30:53 6512 (0x1970)
    Prepared command line: "C:\Windows\system32\msiexec.exe" /i "IE11-Setup-Full.msi" /q /qn AppEnforce 28/01/2015 12:30:53 6512 (0x1970)
Valid MSI Package path = C:\Windows\ccmcache\19\IE11-Setup-Full.msi AppEnforce 28/01/2015 12:30:53 6512 (0x1970)
    Advertising MSI package [C:\Windows\ccmcache\19\IE11-Setup-Full.msi] to the system. AppEnforce 28/01/2015 12:30:53 6512 (0x1970)
    Executing Command line: "C:\Windows\system32\msiexec.exe" /i "IE11-Setup-Full.msi" /q /qn with system context AppEnforce 28/01/2015 12:30:55 6512 (0x1970)
    Working directory C:\Windows\ccmcache\19 AppEnforce 28/01/2015 12:30:55 6512 (0x1970)
    Post install behavior is BasedOnExitCode AppEnforce 28/01/2015 12:30:55 6512 (0x1970)
    Waiting for process 7204 to finish. Timeout = 120 minutes. AppEnforce 28/01/2015 12:30:55 6512 (0x1970)
    Process 7204 terminated with exitcode: 0 AppEnforce 28/01/2015 12:31:05 6512 (0x1970)
    Looking for exit code 0 in exit codes table... AppEnforce 28/01/2015 12:31:05 6512 (0x1970)
    Matched exit code 0 to a Success entry in exit codes table. AppEnforce 28/01/2015 12:31:05 6512 (0x1970)
    Performing detection of app deployment type Internet Explorer 11 - Windows Installer (*.msi file)(ScopeId_F26B70A7-1D38-41D7-AF12-4D44AF3EDFED/DeploymentType_ee666887-31c1-4b60-837d-b7ce84e496c3, revision 1) for system. AppEnforce 28/01/2015
12:31:05 6512 (0x1970)
+++ Discovered MSI application [AppDT Id: ScopeId_F26B70A7-1D38-41D7-AF12-4D44AF3EDFED/DeploymentType_ee666887-31c1-4b60-837d-b7ce84e496c3, Revision: 1, MSI Product code: {86DC0963-2A1C-42AB-B664-17C12DBF6C6D}, MSI Product version: ] AppEnforce
28/01/2015 12:31:05 6512 (0x1970)
++++++ App enforcement completed (11 seconds) for App DT "Internet Explorer 11 - Windows Installer (*.msi file)" [ScopeId_F26B70A7-1D38-41D7-AF12-4D44AF3EDFED/DeploymentType_ee666887-31c1-4b60-837d-b7ce84e496c3], Revision:
1, User SID: ] ++++++ AppEnforce 28/01/2015 12:31:05 6512 (0x1970)
This is the CAS log:
Saved Content ID Mapping e9dea25d-d24d-4d5c-a767-52068338e976.1, C:\Windows\ccmcache\12 ContentAccess 28/01/2015 10:12:41 6884 (0x1AE4)
SetCachedContentInUseFlag no change. Value : false ContentAccess 28/01/2015 10:12:57 9832 (0x2668)
Releasing content request {1738FD09-9D1F-4708-9266-A418E9EB049A} ContentAccess 28/01/2015 10:12:57 9832 (0x2668)
All references to Content 1a757176-8b61-4c70-b147-10cdbbfdd0b5.1 in cache have been removed.                   Content will be Tombstoned. ContentAccess 28/01/2015 10:12:57
9832 (0x2668)
Saved Content ID Mapping 1a757176-8b61-4c70-b147-10cdbbfdd0b5.1, C:\Windows\ccmcache\13 ContentAccess 28/01/2015 10:12:57 9832 (0x2668)
SetCachedContentInUseFlag no change. Value : false ContentAccess 28/01/2015 10:13:10 8140 (0x1FCC)
Releasing content request {25035F86-891D-41D3-AD45-F845D8689F88} ContentAccess 28/01/2015 10:13:10 8140 (0x1FCC)
All references to Content cedf67fc-735e-4360-8db4-c8cb5d39663c.1 in cache have been removed.                   Content will be Tombstoned. ContentAccess 28/01/2015 10:13:10
8140 (0x1FCC)
Saved Content ID Mapping cedf67fc-735e-4360-8db4-c8cb5d39663c.1, C:\Windows\ccmcache\14 ContentAccess 28/01/2015 10:13:10 8140 (0x1FCC)
SetCachedContentInUseFlag no change. Value : false ContentAccess 28/01/2015 10:14:12 14352 (0x3810)
Releasing content request {BB6AA813-A4F7-4095-B60D-4441E3D7833D} ContentAccess 28/01/2015 10:14:12 14352 (0x3810)
All references to Content 108336d1-2d2c-4d93-87b3-49d335640f2a.1 in cache have been removed.                   Content will be Tombstoned. ContentAccess 28/01/2015 10:14:12
14352 (0x3810)
Saved Content ID Mapping 108336d1-2d2c-4d93-87b3-49d335640f2a.1, C:\Windows\ccmcache\15 ContentAccess 28/01/2015 10:14:12 14352 (0x3810)
SetCachedContentInUseFlag no change. Value : false ContentAccess 28/01/2015 10:14:30 13956 (0x3684)
Releasing content request {2CA9AC92-0716-49A7-86D4-434B88B4D07B} ContentAccess 28/01/2015 10:14:30 13956 (0x3684)
All references to Content 3fb07321-f1d1-4b71-90f1-233b355b13dd.1 in cache have been removed.                   Content will be Tombstoned. ContentAccess 28/01/2015 10:14:30
13956 (0x3684)
Saved Content ID Mapping 3fb07321-f1d1-4b71-90f1-233b355b13dd.1, C:\Windows\ccmcache\16 ContentAccess 28/01/2015 10:14:30 13956 (0x3684)
SetCachedContentInUseFlag no change. Value : false ContentAccess 28/01/2015 10:15:53 10588 (0x295C)
Releasing content request {47EB54C8-54C9-4FF8-A302-53AF844FA275} ContentAccess 28/01/2015 10:15:53 10588 (0x295C)
All references to Content 9e56a46e-9a6a-42a5-b52b-811231a0ec2e.1 in cache have been removed.                   Content will be Tombstoned. ContentAccess 28/01/2015 10:15:53
10588 (0x295C)
Saved Content ID Mapping 9e56a46e-9a6a-42a5-b52b-811231a0ec2e.1, C:\Windows\ccmcache\17 ContentAccess 28/01/2015 10:15:53 10588 (0x295C)
SetCachedContentInUseFlag no change. Value : false ContentAccess 28/01/2015 10:16:11 12040 (0x2F08)
Releasing content request {F230295F-5136-49C7-B1FF-68697DA4C421} ContentAccess 28/01/2015 10:16:11 12040 (0x2F08)
All references to Content 21ffbbb7-e491-48c1-b515-f5d6dc72f3fd.1 in cache have been removed.                   Content will be Tombstoned. ContentAccess 28/01/2015 10:16:11
12040 (0x2F08)
Saved Content ID Mapping 21ffbbb7-e491-48c1-b515-f5d6dc72f3fd.1, C:\Windows\ccmcache\18 ContentAccess 28/01/2015 10:16:11 12040 (0x2F08)
Requesting content Content_1e4c1d46-2dd0-4b10-ba32-44523c43a83d.1, size(KB) 98073, under context System with priority Medium ContentAccess 28/01/2015 12:30:30 12104 (0x2F48)
User policy requested with no user credentials. ContentAccess 28/01/2015 12:30:30 12104 (0x2F48)
Invalid user. ContentAccess 28/01/2015 12:30:30 12104 (0x2F48)
Submitted CTM job {7174344D-6757-429C-BA3D-A6FBE9A34DA7} to download Content Content_1e4c1d46-2dd0-4b10-ba32-44523c43a83d.1 under context System ContentAccess 28/01/2015 12:30:30 12104 (0x2F48)
Successfully created download request {5DA5E21D-BB3C-4534-964C-1862EB39F3C8} for content Content_1e4c1d46-2dd0-4b10-ba32-44523c43a83d.1 ContentAccess 28/01/2015 12:30:30 12104 (0x2F48)
Location update from CTM for content Content_1e4c1d46-2dd0-4b10-ba32-44523c43a83d.1 and request {5DA5E21D-BB3C-4534-964C-1862EB39F3C8} ContentAccess 28/01/2015 12:30:30 5228 (0x146C)
Download location found 0 - http://USS-LON-SCCMDP1.uss.co.uk/SMS_DP_SMSPKG$/Content_1e4c1d46-2dd0-4b10-ba32-44523c43a83d.1 ContentAccess 28/01/2015 12:30:30 5228 (0x146C)
Download location found 1 - http://USS-LON-SCCMMAN.uss.co.uk/SMS_DP_SMSPKG$/Content_1e4c1d46-2dd0-4b10-ba32-44523c43a83d.1 ContentAccess 28/01/2015 12:30:30 5228 (0x146C)
Download request only, ignoring location update ContentAccess 28/01/2015 12:30:30 5228 (0x146C)
Download started for content Content_1e4c1d46-2dd0-4b10-ba32-44523c43a83d.1 ContentAccess 28/01/2015 12:30:30 12268 (0x2FEC)
Download completed for content Content_1e4c1d46-2dd0-4b10-ba32-44523c43a83d.1 under context System ContentAccess 28/01/2015 12:30:52 5228 (0x146C)
Computed hash: F6BEAA17C60572A0751C74DACE26075CC2621CF72F23B09EFEEA4C928A3B0E54 ContentAccess 28/01/2015 12:30:53 5228 (0x146C)
Hash verification succeeded for content Content_1e4c1d46-2dd0-4b10-ba32-44523c43a83d.1 downloaded under context System ContentAccess 28/01/2015 12:30:53 5228 (0x146C)
Saved Content ID Mapping Content_1e4c1d46-2dd0-4b10-ba32-44523c43a83d.1, C:\Windows\ccmcache\19 ContentAccess 28/01/2015 12:30:53 5228 (0x146C)
Download succeeded for download request {5DA5E21D-BB3C-4534-964C-1862EB39F3C8} ContentAccess 28/01/2015 12:30:53 5228 (0x146C)
Error: DeleteDirectory:- Failed to delete Directory C:\Windows\ccmcache\19.BCWork with Error 0x00000002. ContentAccess 28/01/2015 12:30:53 5228 (0x146C)
Saved Content ID Mapping Content_1e4c1d46-2dd0-4b10-ba32-44523c43a83d.1, C:\Windows\ccmcache\19 ContentAccess 28/01/2015 12:30:53 12104 (0x2F48)
SetCachedContentInUseFlag no change. Value : false ContentAccess 28/01/2015 12:31:05 10856 (0x2A68)
Releasing content request {5DA5E21D-BB3C-4534-964C-1862EB39F3C8} ContentAccess 28/01/2015 12:31:05 12104 (0x2F48)
All references to Content Content_1e4c1d46-2dd0-4b10-ba32-44523c43a83d.1 in cache have been removed.                   Content will be Tombstoned. ContentAccess 28/01/2015
12:31:05 12104 (0x2F48)
Saved Content ID Mapping Content_1e4c1d46-2dd0-4b10-ba32-44523c43a83d.1, C:\Windows\ccmcache\19 ContentAccess 28/01/2015 12:31:05 12104 (0x2F48)

If the command-line you gave ConfigMgr runs successfully, there's not anything else ConfigMgr can do. Thus the logs above don't add any value. Thus, the issue lies with the MSI. Where did you get it from? Have you tried running it with the /l*v command-line
option to add verbose logging and then reviewed this log file? Have you tried manually testing using the System account (done using psexec) to more closely emulate how ConfigMgr invokes the command-line?
Jason | http://blog.configmgrftw.com | @jasonsandys

Installing plugin software - Photoshop says failed

Similar Messages

Maybe you are looking for