Installing Presenter using the CCP launcher

I cannot install Presenter. I used the creative cloud package builder to build my package. I do not have a problem downloading the package but when it runs, I do  not get an error, it just never installs.
In addition, I do look at the PDApp file. This fatal error in the installatin is 'media failed'. Well, this is a package created by the packager. I have downloaded the package several times to no avail.
I have Win7 64 bit, Office 2013 32 bit, and Presenter 32 bit.
I have even gone so far as to reinstall the OS on the computer. So, the above scenario is what I ahve right now, but I haver tried Win7 32 bit, Win 8,a nd then Office and Presenter in both 32 bit and 64 bit variations.

It's a known issue.  You need to install the Acrobat MSI in the Exceptions folder with a specific command line and then the Creative Cloud Packager MSI on Windows. 
http://helpx.adobe.com/creative-cloud/packager/deploying-acrobat.html

Similar Messages

  • How do I block this msg from always popping up "iTunes requires Safari 4.0.3 or later to be installed to use the iTunes Store within iTunes. Use Software Update to download and install the latest version of Safari" bc I can't download the latest software?

    How do I block this msg from always popping up "iTunes requires Safari 4.0.3 or later to be installed to use the iTunes Store within iTunes. Use Software Update to download and install the latest version of Safari". I cannot download this software bc my lap top is to old. The msg literally pops up everytime I make any moves on itunes and is VERY annoying.

    I have a 2006 MacBook with an Mac OS X version 10.5.
    In that case, try downloading a Safari 5.0.5 for leopard from the following location:
    http://www.apple.com/safari/download/

  • How to install and use the Gnome-DO application in oracle enterprise Linux

    My Oracle Enterprise linux is 5.3,
    I want to install and use the Gnome-Do(http://do.davebsd.com) in my box.
    Please help me regarding this.
    With Regards
    DSK

    According to Google, Gnome-Do has known issues about CPU bugs and hogs and the latest incarnation does not seem to be available for RHEL and clones. You should have more luck with Linux Desktop distributions like Fedora and Ubuntu. Or you could try to build from source using the info at: http://do.davebsd.com/wiki/Installing_Do. Good luck - I wouldn't bother.

  • How to install and use the Khmer unicode Khmer MEF1 and Khmer MEF2?

    How to install and use the Khmer unicode Khmer MEF1 and Khmer MEF2?
    from www.mef.gov.kh in the bottom of the page, you can get the unicode for the ms office

    I think that stuff is for windows, a waste of time trying to use it on a Mac.
    There is no need to download anything for Khmer on a Mac.  Apple provides Khmer fonts and keuyboards with OS X.
    OS X Mountain Lion: Type in another language
    MS Word for Mac does not support Khmer.  Use TextEdit, Pages, Nisus Writer, LibreOffice instead

  • How to install and use the CP2102 USART to USB Converter?

    First off, I did a quick search and found that some people had had success in that the cp210x driver was already installed on their machines. I did a modprobe and it returned nothing (not an error).
    I searched around on the net a bit and found a very useful USART to USB converter bridge (http://www.nexuscyber.com/cp2102-usb-to … Mgod5UQAdQ). The CP2102 is a programmable device with many settings insofar as the data framing is concerned. As such, a driver for the device must be used to interface and modify these parameters.
    On the Silabs website I found this driver (http://www.silabs.com/products/mcu/page … ivers.aspx) for linux (kernel > 3.x.x). The problem is that this driver is just a single C program with zero documentation. An include make file is about as useful considering it has a single line in it that fails (for me) at run-time.
    obj-m = cp210x.o
    KVERSION = $(shell uname -r)
    all:
    make -C /lib/modules/$(KVERSION)/build M=$(PWD) modules
    clean:
    make -C /lib/modules/$(KVERSION)/build M=$(PWD) clean
    The driver source can be found here (http://pastie.org/private/kulx2zqdyvkafoxekwjq)
    Where my make error is
    make -C /lib/modules/3.14.4-1-ARCH/build M= modules
    make[1]: Entering directory '/usr/lib/modules/3.14.4-1-ARCH/build'
    HOSTCC scripts/basic/fixdep
    HOSTCC scripts/kconfig/conf.o
    HOSTCC scripts/kconfig/zconf.tab.o
    In file included from scripts/kconfig/zconf.tab.c:2537:0:
    scripts/kconfig/menu.c: In function 'get_symbol_str':
    scripts/kconfig/menu.c:587:18: warning: 'jump' may be used uninitialized in this function [-Wmaybe-uninitialized]
    jump->offset = strlen(r->s);
    ^
    scripts/kconfig/menu.c:548:19: note: 'jump' was declared here
    struct jump_key *jump;
    ^
    HOSTLD scripts/kconfig/conf
    scripts/kconfig/conf --silentoldconfig Kconfig
    scripts/Makefile.build:44: /usr/lib/modules/3.14.4-1-ARCH/build/arch/x86/syscalls/Makefile: No such file or directory
    make[2]: *** No rule to make target '/usr/lib/modules/3.14.4-1-ARCH/build/arch/x86/syscalls/Makefile'. Stop.
    /usr/lib/modules/3.14.4-1-ARCH/build/arch/x86/Makefile:185: recipe for target 'archheaders' failed
    make[1]: *** [archheaders] Error 2
    make[1]: Leaving directory '/usr/lib/modules/3.14.4-1-ARCH/build'
    Makefile:4: recipe for target 'all' failed
    make: *** [all] Error 2
    If I do not sudo make I just get this:
    .probe = usb_serial_probe,
    ^
    /home/branden/Desktop/Linux_3.x.x_VCP_Driver_Source/cp210x.c:165:16: error: 'usb_serial_disconnect' undeclared here (not in a function)
    .disconnect = usb_serial_disconnect,
    ^
    /home/branden/Desktop/Linux_3.x.x_VCP_Driver_Source/cp210x.c: In function 'cp210x_get_config':
    /home/branden/Desktop/Linux_3.x.x_VCP_Driver_Source/cp210x.c:321:3: error: implicit declaration of function 'dbg' [-Werror=implicit-function-declaration]
    dbg("%s - Unable to send config request, "
    ^
    /home/branden/Desktop/Linux_3.x.x_VCP_Driver_Source/cp210x.c: In function 'cp210x_open':
    /home/branden/Desktop/Linux_3.x.x_VCP_Driver_Source/cp210x.c:430:36: error: 'struct usb_serial_port' has no member named 'number'
    dbg("%s - port %d", __func__, port->number);
    ^
    /home/branden/Desktop/Linux_3.x.x_VCP_Driver_Source/cp210x.c: In function 'cp210x_close':
    /home/branden/Desktop/Linux_3.x.x_VCP_Driver_Source/cp210x.c:451:36: error: 'struct usb_serial_port' has no member named 'number'
    dbg("%s - port %d", __func__, port->number);
    ^
    /home/branden/Desktop/Linux_3.x.x_VCP_Driver_Source/cp210x.c: In function 'cp210x_get_termios':
    /home/branden/Desktop/Linux_3.x.x_VCP_Driver_Source/cp210x.c:534:17: error: invalid type argument of '->' (have 'struct ktermios')
    &tty->termios->c_cflag, &baud);
    ^
    /home/branden/Desktop/Linux_3.x.x_VCP_Driver_Source/cp210x.c: In function 'cp210x_get_termios_port':
    /home/branden/Desktop/Linux_3.x.x_VCP_Driver_Source/cp210x.c:556:36: error: 'struct usb_serial_port' has no member named 'number'
    dbg("%s - port %d", __func__, port->number);
    ^
    /home/branden/Desktop/Linux_3.x.x_VCP_Driver_Source/cp210x.c: In function 'cp210x_change_speed':
    /home/branden/Desktop/Linux_3.x.x_VCP_Driver_Source/cp210x.c:706:21: error: invalid type argument of '->' (have 'struct ktermios')
    baud = tty->termios->c_ospeed;
    ^
    /home/branden/Desktop/Linux_3.x.x_VCP_Driver_Source/cp210x.c: In function 'cp210x_set_termios':
    /home/branden/Desktop/Linux_3.x.x_VCP_Driver_Source/cp210x.c:735:36: error: 'struct usb_serial_port' has no member named 'number'
    dbg("%s - port %d", __func__, port->number);
    ^
    /home/branden/Desktop/Linux_3.x.x_VCP_Driver_Source/cp210x.c:740:22: error: invalid type argument of '->' (have 'struct ktermios')
    cflag = tty->termios->c_cflag;
    ^
    /home/branden/Desktop/Linux_3.x.x_VCP_Driver_Source/cp210x.c: In function 'cp210x_tiocmset_port':
    /home/branden/Desktop/Linux_3.x.x_VCP_Driver_Source/cp210x.c:871:36: error: 'struct usb_serial_port' has no member named 'number'
    dbg("%s - port %d", __func__, port->number);
    ^
    /home/branden/Desktop/Linux_3.x.x_VCP_Driver_Source/cp210x.c: In function 'cp210x_tiocmget':
    /home/branden/Desktop/Linux_3.x.x_VCP_Driver_Source/cp210x.c:910:36: error: 'struct usb_serial_port' has no member named 'number'
    dbg("%s - port %d", __func__, port->number);
    ^
    /home/branden/Desktop/Linux_3.x.x_VCP_Driver_Source/cp210x.c: In function 'cp210x_break_ctl':
    /home/branden/Desktop/Linux_3.x.x_VCP_Driver_Source/cp210x.c:932:36: error: 'struct usb_serial_port' has no member named 'number'
    dbg("%s - port %d", __func__, port->number);
    ^
    /home/branden/Desktop/Linux_3.x.x_VCP_Driver_Source/cp210x.c: In function 'cp210x_init':
    /home/branden/Desktop/Linux_3.x.x_VCP_Driver_Source/cp210x.c:989:2: error: implicit declaration of function 'usb_serial_register' [-Werror=implicit-function-declaration]
    retval = usb_serial_register(&cp210x_device);
    ^
    /home/branden/Desktop/Linux_3.x.x_VCP_Driver_Source/cp210x.c:996:3: error: implicit declaration of function 'usb_serial_deregister' [-Werror=implicit-function-declaration]
    usb_serial_deregister(&cp210x_device);
    ^
    cc1: some warnings being treated as errors
    scripts/Makefile.build:314: recipe for target '/home/branden/Desktop/Linux_3.x.x_VCP_Driver_Source/cp210x.o' failed
    make[2]: *** [/home/branden/Desktop/Linux_3.x.x_VCP_Driver_Source/cp210x.o] Error 1
    Makefile:1274: recipe for target '_module_/home/branden/Desktop/Linux_3.x.x_VCP_Driver_Source' failed
    make[1]: *** [_module_/home/branden/Desktop/Linux_3.x.x_VCP_Driver_Source] Error 2
    make[1]: Leaving directory '/usr/lib/modules/3.14.4-1-ARCH/build'
    Makefile:4: recipe for target 'all' failed
    make: *** [all] Error 2
    There is no documentation aside from:
    make ( your cp210x driver )
    cp cp210x.ko to /lib/modules/<kernel-version>/kernel/drivers/usb/serial
    insmod /lib/modules/<kernel-version/kernel/drivers/usb/serial/usbserial.ko
    insmod cp210x.ko
    Can anyone provide some guidance on the steps to install this driver (or at least where to look) and why there is such a lack of documentation? Are there assumptions here that I am not aware of? How is anyone suppose to use this? If you look in the source there are structures being used as arguments to functions that are never defined as far as I can tell. Perhaps they are part of the header files included at the top, but I could not find some of those on my machine either.
    Has anyone had success using this device?

    ewaller wrote:<hopeful>Do you have an oscilloscope? </hopeful>
    First, I think you have a mismatched Baud.  Check your settings in GtkTerm.  It could also be the uController.  I know you said you have it set for 9600 Baud, but are you sure?  The divisor settings are dependent on your clock frequency.  Are you sure you are using the correct divisors for the frequency of your crystal?  And are you using a crystal, ceramic oscillator, or external oscillator for your time base?
    I did not think the internal RC oscillators were that bad off, so I was using the internal 8MHz (DIV8 = 0 fuse bit). Taking your advice I just refused the AVR and set it to use a 20MHz clock (external crystal oscillator) to no avail. The setting in GTKterm is certainly 9600 baud.Referencing the datasheet for the Atmega328P we have:
    Which gives a a UBRR register value of 129 corresponding to normal speed (U2Xn = 0). This is all computed for me at compile-time via this formula:
    20,000,000/(16*9600) - 1 = 129.2 ~ 129 truncated.
    That the two devices can communicate tells me they both might be using the same wrong Baud.
    I was also suspicious of this .. I do not have a trivial way to test this though. Perhaps some workaround using timers is about the best I can do; no oscilloscope here. Doing a quick high-level test I did find something rather interesting though. Both devices are set to run at 9600 baud. One device is operating at 8MHz (internal oscillator) and the other is using an external 20MHz crystal. I am getting UART communication between the devices, but certainly not the characters I'm sending..
    The other problem is that I think you have "Local Echo" turned on in GtkTerm.  This places the system in "Half Duplex" mode in which data are not expected to be echoed from the Atmel.  That you are getting two characters when the pins are shorted tells me you get the local echo and the loopback.  Then the loopback is missing, you still get the local echo.   Also, make sure you have parity turned off.
    GTKterm does not actually show you what you are typing into the terminal. That is, when you type a character then nothing is displayed to the screen. Presumably this character is sent out as you type it. I was under the impression that local echo would just echo what I type to the screen as well as send it out. Thank you for the clarification.
    Last edited by sherrellbc (2014-05-28 03:16:48)

  • I purchased Lr3 (disc) and never installed. I now have a Mac laptop, no disc drive. Can I install just using the serial

    I purchased Lr3 (disc) and never installed. I now have a Mac laptop, no disc drive. Can I install it just using the serial #? If so how?

    You can get a download for Mac at this link and then validate it with your serial number.
    http://www.adobe.com/support/downloads/detail.jsp?ftpID=4927
    Note that LR3 was designed for OSX 10.5 or 10.6. It will run on 10.9 (Mavericks) but there may be some appearance differences to the sliders. But why not give the download a try. Otherwise you may be best to upgrade to LR5 or wait for LR6.
    See Victoria’s link for further information:
    http://www.lightroomqueen.com/lightroom-compatible-os-x-mavericks/

  • Using the transaction launcher to call a BOR method to display a PDF

    Hello gurus,
    I have created a PDF icon and an onclick action to open a pdf, that displays on every row of an assignment block in the actions column, but I do not know the technical process to determine how to get a PDF from the IXOS system from the line selected. (even if I know it depends on an ID attribute of that assignment block) I want to to call a transaction launcher with the url for the pdf in the IXOS that has an ID that identifies which line in the assignment block the user has clicked the pdf icon for (does that make sense?)
    In CRM 4, in the collection factsheet assignment block, the link was coded into an XSLT which is then displayed in the GUI and you would have a clickable link for a pdf file in a row in a table. That link would be as follows:
             <xsl:variable name="ev_key">SAPEVENT:?OBJTYPE=<xsl:value-of select="attributes/OBJTYPE"/>&amp;OBJKEY=<xsl:value-of select="@KEY"/>&amp;LOGSYS=<xsl:value-of select="attributes/LOGSYS"/></xsl:variable>
                 <a href="{$ev_key}"></a>
    This will get the file in IXOS and display it, in CRM 4. In CRM 7, the link is an icon in every line of an assignment block.
    Here are some questions I have now for the functional side in the meantime:
    1) Can we fetch the PDF in IXOS for each line of an assignment block and have it open? If so, how? Transaction launcher, function modules (like ARCHIVOBJECT_DISPLAY) in the OPTA package? (the package for all IXOS related function modules..)
    2) Which URL should I call with the transaction launcher? a URL link to the PDF on the IXOS system?? or sapevent:xxx?
    3) Do we have to configure a transaction in the IMG to be launched with the attributes listed there? Do we have to link it to any classes/ objects?
    4) Do we have to have the code to the logical link dynamically to call the right PDF for each table line? Is it right to put this code in my event handler?? Usually transaction launchers are just in the nav bar.....
    5) Are there any existing examples of this or a similar functionality/ logic that I could refer to, preferably in CRM 7 WebUI?
    6) Do you have any code to just display a PDF in a new window? Or prompt a download?
    One possible way I thought of would be for me to have a logical link defined in the IMG for the transaction launcher, and have the attributes defined for my BOR object that I would call, and pass it different attributes (eg. objtype, objkey, logsys...) and then return the PDF and display it in the UI in a new browser window by itself. (There is a BOR method for my BOR object named  'display_pdf'!!!!)
    What do you think would be the optimal solution here? Does my theory of calling a BOR object with a transaction launcher to display a PDF make ANY sense whatsoever???
    Please do not hesitate to propose any potential solution. Any partial answers/ links to wikis/ other threads, anything would be much appreciated.
    Thank you in advance.
    Best regards,
    Jonathan Laplante
    Edited by: Jonathan Laplante on Jul 2, 2011 4:50 AM

    Hi Any help on this....I am still awaiting the response.
    Requirement: My requirement is to launch the SE38 transaction on WEBUI using transaction luncher tool and set the parameter on the selection screen.
    Issue: The issue is that I am able to lunch the transaction but unable to set the parameter
    Steps Performed:
    I want to list down all the steps I performed to launch an SE38 transaction using transaction launcher on the WEBUI
    1) Defined logical system in tcode CRMS_IC_CROSS_SYS
    -The logical link looks like this
    http://<server>:<port>/sap/bc/gui/sap/its/webgui/!?transaction=IC_LTXE&okcode=ICEXECUTE ?sap-client=300
    2) Defined URL & paratemeter wherein the request method is "GET", opted for NON-BSP URL
    URL link here is
    http://<server>:<port>/sap/bc/gui/sap/its/webgui/!?transaction=SE38&okcode=ONLI
    -Note: My selection screen okcode os ONLI*
    -The logical system ref is provided here
    3) Defined the parameter by giving the screen name like for SE38 selection screen name is "RS38M-PROGRAMM"
    4) Configured the transaction launcher of type B - URL type and provided the reference of the URL ID, choose the relevant parameter from the drop down and have hardcoded the value, cheked the box "Save Data in Activity Clipboard
    5) Added this in the NAvlink/Bus Role etc
    6) Now in the handler class of the TL the code looks like this:
    IF_CRM_IC_ACTION_HANDLER~PREPARE_DATA_FLOW
    __gdc ?=
    cl_crm_ui_data_context_srv=>get_instance( gv_view_controller ).
    __value
    =
    'ZC_TEST'.
    add_parameter(
       iv_name =
    'RS38M-PROGRAMM'
    iv_value = __value ).
    However, after performing the above steps I am unable to set the parameter. Please suggest where am I missing out on. An early response would really be appreciated.

  • Owner of CS6 Master. Unaccidentally installed Acrobat XI Professional. Was always trial - not upgrade. Uninstalled Acrobat XI Pro. Can I just download the Acrobat X Pro and install it using the CS6 Master License number ?

    Hi, I believe I made a mistake when installed Acrobat XI Professional over the CS6 Master version Acrobat X Professional. The result ended up with running a trial version of Acrobat XI Professional. I wanted to upgrade but not using the subscription version, but rather buy the software and own it, like with my CS6 Master Software. Well, I now uninstalled the Acrobat XI Professional and wondering if I now can download the Acrobat X Pro software, install it and use the CS6 Master license number to get going ?
    Kind Regards
    Gunnar

    Well. After downloading the separate full version of Acrobat X Professional, it could not be installed using the serial # for CS6 Master Collection. I started the installation for CS6 Master Collection and ONLY selected Acrobat X Professional. Voila! Now everything is working.
    //Gunnar

  • Feature with ID 15/.. has already been installed. Use the force attribute to explicitly re-install the feature

    Hi everyone,
    I really become desperate with this one. I know, it's mentioned hundred times in the web, and it really works when you use a force deployment, but my simple question is: Why?
    To explain my issue: We have several SharePoint 2010 solutions which we want to deploy to SharePoint 2013 with Visual Studio 2012 running on Windows Server 2012. Site solutions work. But farm solutions just don't. I get the error (you
    guessed it): A feature with ID 15/... has already been installed in this farm. Use the force attribute to explicitly re-install the feature.
    And it does really work with the force attribute, but why on earth do you have to use the force flag? Something has to be different, and if there is an already installed feature with this ID, then why can Visual Studio not uninstall or
    deactivate it by itself first? This error never occurred with SharePoint 2010 and VS2012, although features are already installed. 
    Thanks a lot for your effort.
    Best regards,
    Patrick

    Hi Check this
    1.Double click on the feature.... ( or right click and choose properties)
    2.then in the properties window make
    3. ALWAYS FORCE INSTALL = false... (this should be false)
    Manoj Gangwar | Sharepoint MCPD | Sharepoint MCTS |

  • Install server using the db-9 port

    Hi
    Is the login via db-9 disabled when the server is booted from installation media or when it is RDY4Setup?
    I tried to install a new Xserve yesterday using the db-9 port but I was unsuccessful, I never got any loginprompt.

    I must admit, I've never tried.
    Logic says it should work, but I don't know.
    However, there are other options. Assuming the server has a physical link to the network you can ssh to the server. Login as root using the first 8 characters of the serial number as the password.
    (that's the same login you'd use via the console port but the fact that you don't get a login prompt implies that you're not getting far enough to provide a username/password).

  • Installing and using the instant client

    Hi, we are having some troubles with understanding how to use the instant client.
    We are using a windows client, connection to our Oracle database via odbc, so we can make some staticstics.
    We used to use the full oracle client 8 install, but when that gave us some troubles, so we wantedto switch to a newer release, and saw that there was an instant client. Thinking that i didnt need to install the full oracle client i downloaded the basic package and the odbc addon.
    I unzipped the two archieves in c:\oracleodbc on a clean computer.
    I added the c:\oracleodbc path to the %path%
    I added TNS_ADMIN system variable pointing to c:\oracleodbc
    i ran the odbc_install.exe program.
    I would now think that i could access the oracle database via odbc without having to install the full oracleclient, but it does not work.
    When i try to add a odbc connection in microsoft odbc manager i get the following error when i choose the oracle odbc driver:
    "The setup routines for the Oracle in instantclient10_2 ODBC driver could not be loaded due to system error code 126"
    When i click ok to that i get a new error window with the title: "Driver's ConfigDSN, ConfigDriver, or ConfigTranslator failed" and the error text:
    "Could not load the setup or translator library"
    I was not planning to use any TNS files, but just use the quickconnect string, to connect to the right oracle service.
    Do i still need to install the full client for it to work or what ?
    Hope someone can help out.
    Thanks in advance.

    I'm replying to an old thread, but did any of you ever got this resolved?
    I've got a fresh Windows 2003 Server install, from which I'd need to establish an ODBC connection to an Oracle database.
    I've downloaded Instant Client Basic and ODBC add-on, unzipped them into D:\oracle\instantclient10_2\ , added the path into PATH, TNS_ADMIN and ORACLE_HOME environment variables and run the odbc_install.exe successfully.
    Trying to create an ODBC connection (System DSN) results in "The setup routines for the Oracle in instantclient10_2 ODBC driver could not be loaded due to system error code 126".
    I don't have MFC71 on the server and I couldn't figure out where to get those - I won't install MS Visual .NET just for this. MFC42 appears to be included in the OS.
    Where can I get an older version of Instant Client instead?

  • Install Printer Using the System

    The guy in the store showed me how to install my printer using the Mac system rather then the disk I got from HP. Could someone show me again.

    Select Mac Help from the Finder's Help menu and search for "add printer" without quotes. The first article gives step by step instructions. You should also read the user manual that came with your printer which also may have instructions.

  • Authorization problem when using the Transaction Launcher

    Hi All,
    We have an authorization problem when we call a transaction (EL37) in ECC from the IC Web Client.
    We believe that we have done all the necessary customizing in CRM and when we press the link in the Navigation Bar we are asked to logon to our ECC system. After logging on, we get an error message saying that "You do not have authorization for transaction EL37". If I then enter the transaction directly in the white command field in top of the ECC screen, then I have no problem calling the transaction.
    My user has SAP_ALL, so it shouldn't be a problem with the authorizations. Maybe it has something to do with the transaction IC_LTXE? I have also tried to add this transaction to my user profile, but that didn't help.
    Does anyone have a suggestion for how to fix this problem?
    Kind Regards,
    Gitte.

    Hi,
    I have found the solution for the problem myself. The transation code in the Transation Launcher Wizard must be written in capitals! We had entered 'el37' and have now changed it to 'EL37'.
    Best Regards,
    Gitte.

  • I previously purchased Lightroom 5 I have a new computer and want to install and use the full version of this instead of paying the monthly fee. How can I do that?

    Hello,
    I previously had a Mac Book Air and just recently purchased a Mac Book Pro. I previously had Lightroom 5 on my Mac. I would like to have the purchased version running on my new Mac and not pay the monthly fee to use Lightroom. I have the product key in an email from when I purchased Lightroom. I also have the trial version of Lightroom installed on my computer but my trial version has expired. How do I validate the Product Key?  Thank you!

    If the trial version is not presenting you with an option to activate it then you might be best off just uninstalling it and reinstalling via the download link(s) below...
    Lightroom - all versions
    Windows
    http://www.adobe.com/support/downloads/product.jsp?product=113&platform=Windows
    Mac
    http://www.adobe.com/support/downloads/product.jsp?product=113&platform=Macintosh

  • Is there a step by step instruction on how to install and use the ae render engine?

    The answers on the adobe are in computer-ese and I just don't get it.  Currently I am using ae 5.5 on a 2.8 eight core with a quad core waiting to be accessed for rendering.
    ERIC

    I'm not sure I understand your question. The render engine is installed with you installed CS5.5 If you want to use another computer for rendering all you have to do is to install AE on that computer, open up the render engine (it says what it is in name of the app) and then open your project file, pick the comps you want to render and press render.
    If you are trying to get the render engine to work in the background then you need to do a bunch of other stuff and we need to know all about your system, operating system down to the last decimal point, memory, and projects to point you to what may be the best setup. We also need to understand what you want to be doing with this machine while it is rendering. Things like working on another project in AE while rendering may require different settings than working in Photoshop or answering email's while rendering.

Maybe you are looking for