Installing problem on IMAC of CS6 PHotoshop

PhotoshopCS6 from suite will not open, says "not supported on this type of MAC" . have IMAC, running OS 10.6.8. Indesign is running fine.

Well, what iMac is it exactly? That message usualyl means what it says - your Mac has an older, unsupported processor...
Mylenium

Similar Messages

OS 9 Install problem on imac G3

hello all,
i have an OS install problem on my imac . I just finished formatting the drive . the drive is
paritioned :
1st partition = HD1: 5.5 Gb
2nd partition = HD2 : 2.5 Gb
3rd partition = HD3 : 110+ Gb
Then, in order to save some time ( i thought ) , i tried directly install os 9 from an imac
DV CD , on HD1 : i thought i d be quicker so i would have to start with os 8.5 then upgrade to 8.6 and etc .
that turned out to be a bad idea. the system install warned me it couldnt install Air port because the hardware wasnt compatible . it gave me two options : either ignore this message or quit . i chose ignore : again certainly a bad choice .
After the install was finished , the mac wouldnt start on HD1 . the sytem install is apparently incomplete ,or anycase it doesnt work .
i then installed os 8.5 from original imac tray load install CD on HD2 , and it works fine .
now the question is : what should i do with my bad os9 system ? i need an operating system on this partition. perhaps i can trash it and reinstall mac os8.5 on it ? i hope there is a way to get out of this without formatting the drive again .
thanks for any advice .

about the os9 CD : it is a retail verson , only not of the same imac model .
That is not a retail version of OS 9. A retail version of OS 9 has no dependencies on any model of Mac. You have a machine specific disc which probably won't work with your iMac.
1/ i dont know how to reformat a partition without formatting the entire drive . perhaps you can explain .
In OS X you use Disk Utility and only select the partition that you want to reformat. It has been ages since I used OS 8 so I'm not sure if it is even possible using "Drive Setup".

Problems with Imac 27" and Photoshop CS3 on Windows 7

Hi I have an Imac 27" running Windows 7 and Photoshop runs poorly and crashes quite often, has anyone else had this problem?
My Imac spec is :
Model Name:          iMac
Model Identifier:          iMac11,3
Processor Name:          Intel Core i5
Processor Speed:          2.8 GHz
Number Of Processors:          1
Total Number Of Cores:          4
L2 Cache (per core):          256 KB
L3 Cache:          8 MB
Memory:          4 GB
Thanks
Paul

While I don't have a newer iMac, run Windows or use PhotoShop... but I'd say that you need more than the stock 4GB of RAM to get fully up to speed.
Upgrade Apple iMac Memory & more – Easy Guide, Free Installation Videos.
Crucial Memory Upgrades for Macs - Apple Memory
I suggest adding 2 x 4GB modules to the existing 2 x 2GB modules and bring it up to 12GB, cause if you only upgrade to 8GB by adding 2 x 2GB and 8GB is not enough or you want more later, then that upgrade is a waste.
Dennis

CS4 Install problems on iMac

Hi, I've just purchased the Adobe Creative Suite 4 - Design Premium. However, the disks will not load on my iMac. They spin several times before being ejected. I have inserted other disks to ensure that the drive is not at fault, but all load correctly. I have subsequently contacted Adobe who have reports of some other users experiencing problems. But, they maintain that the disks are not at fault, indicating that it is a problem for Apple to resolve, suggesting that the DVD drivers are at fault. I've checked that my system software is up to date, but still no luck. Coincidentally, I have previously loaded the Production Premium software from Adobe on the same system with no problem. Any suggestions?

Is CS4 on a DVD-DL? I suspect it is.
If so, a lots of (i)Mac seems to have problem with DVD-R DL and DVD+R DL (search the forum for DVD-DL not burning/mounting). It may have something to do with a recent (security) update... Or maybe your DVD Drive is dirty or damaged (which would be surprising since you have a recent model). Anyway, try the various (and often Voodoo-ish) solutions around like reseting PRAM, creating a new account, cleaning the lens, etc.
Good luck and if it's (even partly) software related, pray for 10.5.7 (or 10.6) to correct this issue...

Just completed a clean install of CS6 Photoshop on my Yosemite Mac Book Pro and the Adobe Application Manager does not work and cannot install a fresh copy from Adobe

Just re-installed a fresh copy of CS6 Photoshop on my Yosemite Mac Book Pro and somehow the Adobe Application Manager does not work and therefore cannot verify my copy. What should I do?
I get a message saying that Adobe Application Manager may be damaged and that I should install a new version of AAM. But after downloading a fresh copy of AAM and doing the install, the program (AAM) still will not install. It is like an infinite loop!
Please, someone help!
Thanks!

HI gener7!
I'm sorry but I am not on Creative Cloud. I'm still on CS6 and it was the Adobe Application Manager that wasn't working and I could not install the update to this application. My AAM version is: 8.0.0160
The link you provided was the update that I wanted to install but it does not work. A window shows up during that install that says:
We've encountered the following issues.
Installer failed to initialize. Please download Adobe Support Advisor to detect the problem.
and then the link to the Adobe Support Advisor which leads to a "Adobe Support Advisor has been discontinued" page.
Thanks!

CS6 photoshop and related updates failed to install

I have tried twice to download and install the 4 updates for CS6 photoshop and related applications. Each attempt failed. Want should I do? My OS is Vista.

Please refer :
U44M1P7 - Updates :
http://helpx.adobe.com/creative-suite/kb/error-u44m1p7-installing-upda tes-ccm.html
U44M1P7, U44M2P7 - Creative Cloud Help / Can't apply Extension Manager update 6.0.2 | Mac OS :
http://helpx.adobe.com/creative-suite/kb/unable-apply-extension-manage r-update.html

CS6 Photoshop Extended

After installing the trail version of CS6 photoshop extended , why do i not see the 3D pull down menu?

Because your graphics card isn ot supported or at least its driver is not up to snuff. 3D featurtes require working GPU features.
Mylenium

Great Problemes after installing Yosemite (10.10.2 ) with Photoshop CS6....The program crashes --last time 10 times during my work session..wacomtable doesnt work..it is slow...and get error messages about the graphic card....It s a Terror to work with my

great Problemes after installing Yosemite (10.10.2 ) with Photoshop CS6....The program crashes --last time 10 times during my work session..wacomtable doesnt work..it is slow...and get error messages about the graphic card....It s a Terror to work with my beloved Photoshop!

The Yosemite upgrade very often damages existing Photoshop installations. Thank Apple for that.
You need to uninstall and re-install Photoshop, then apply all the Photoshop upgrades from scratch.
But first, give us details about your setup:
BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
A screen shot of your settings or of the image could be very helpful too,
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

Hello i have a imac and i want to install cs6 photoshop and i keep getting installation failed indicating i have a conflicting version must be removed before installing the current media. I have deleted everything related to above and previous photo shop

hello i have a imac and i want to install cs6 photoshop and i keep getting installation failed indicating i have a conflicting version must be removed before installing the current media. I have deleted everything related to above and previous photo shop files i could think of, could you please help out with this. thanks

teddyscroggins wrote:
…have deleted everything related to above and previous photo shop files i could think of, could you please help out with this. thanks
That is precisely the WRONG thing to do. You should never delete, but uninstall.
Now you need to look for, download and run the Adobe CS Cleaner tool.

CS6 and AAMEE 3.1: Install Problems

Hello,
I have been trying to install some components of the CS6 Education Edition by packaging them using AAMEE 3.1 (I am packaging each product individually rather than having all of them in a single package), but I have hit some problems.
The packaging process appears to work. However, following the completion of the installation process (when msiexec no longer appears in Powershell's 'Get-Process' list), the product - which was supposed to be installed to a location which was specified during packaging - does not appear anywhere on the hard disk, and nothing is added to the Start Menu. I have tried with two seperate packages. One contains Acrobat X Pro and the other contains Photoshop CS6.
I have skimmed over the logfiles VERY briefly for both packages (those things are huge!) and at the bottom of the logfiles which were created on the first install attempt of the packages, the line...
"MSI (c) (80:78) [11:42:44:282]: Windows Installer installed the product..."
...can be seen. On a second install attempt however, the newly-created logfiles have the line...
"MSI (c) (58:94) [11:46:05:268]: Windows Installer reconfigured the product...."
...at the bottom, suggesting that something somewhere has been reconfigured.
The .msi files were executed using Command Prompt which had been launched via 'Run as Administrator' and they were executed with "msiexec /i <path> /qn".
Any help will be appreciated.
Christian Hill

Hi,
Sorry to hear you are facing problems. We need to investigate the log file to know the exact reason of failure.
Can you please send the PDApp.log file to [email protected] The log file is formed at user specific temp folder.You can find this folder using %temp%\PDApp.log (if msi is run from logged-in user account) OR [BootDrive]:\windows\Temp\PDAp.log. (No user logged in).
Thanks,
Saransh Katariya | Adobe Systems | [email protected]

Have CS 5 Installed on my iMac and works ok. But installed on my new MacBook Pro it won't open NEF files from my Nikon D810. Displays NEF icons, but when I try and open them the response is: Make sure latest RAW updates are installed. If problem persists

Have CS 5 Installed on my iMac and works ok. But installed on my new MacBook Pro it won't open NEF files from my Nikon D810. Displays NEF icons, but when I try and open them the response is: Make sure latest RAW updates are installed. If problem persists follow link: http://www.adobe.com/go/kb407111. Have installed Bridge 5.0.2.4; Raw Ref Version 7.0.0.308; DNG converter_8_7_1.dmg; Bridge 5.0.2 Update 2. Also same problem with Lightroom which I don't normally use. Lightroom_3_LS11_mac_3_6.dmg installed.

In the link you posted it states that the Nikon 810 requires ACR 8.6 or newer.
Version of ACR are specific to versions of Photoshop. You cannot use 8.6 nor even 7.0.in CS5.
I believe that ACR 6.7 is the latest that will work with CS5, so make sure you have this installed and get rid of ACR 7.
Having 2 versions of ACR will cause problems.
You have already downloaded DNG Converter 8.7.1.
Have you double clicked the DMG file to allow you to install DNG Converter on your computer?
Be aware that DNG converter is a stand-along application and not a plug-in.
You need to open DNG converter at select the FOLDER that contain your .NEF files.
Don't open the folder and try to select individual files, it doesn't work that way.
After converting your D810 files to DNGs you can then open the DNGs in CS5
The problem is your camera didn't exist when CS5 & its version of ACR was developed.
i don't use Lightroom, but the list mentions Lightroom 5.6 as needed to open D819 so your 3.6 version of LR won't cut it.

CS6 Photoshop install error

I have CS5 Master on my computer.
I downloaded CS6 Photoshop beta. After downloading, I clicked on set-up.exe in the WINZIP folder.
I get the following error: Installer failed to initialize. This could be due to a missing file. Please download Adobe Support Advisor
to detect the problem.
I downloaded the support advisor but it came up with no problem.
I have downloaded it 2x with the same error message when trying to install.
What else can I try?

Here is the post I was trying to recall.
Use a different unzipping application. If I remember correctly, some users were having issues with WinZip. They tried WinRar, and it solved their issue.

PHOTOSHOP CS6 PLUGIN PROBLEM; I have PS CS6

PHOTOSHOP CS6 PLUGIN PROBLEM; I have PS CS6 & a mac osx 10.7.5 I have downloaded the pluginhttps://sourceforge.net/projects/panotools/ I drag it to the applications folder (applications/photoshop/plugins) and it shows up there, but it does not show up when I reopen photoshop, can anyone tell me if this is a valid plugin or what I am doing wrong?

Thank you for the link, I don't see where the licensing is listed at all, I also don't see where it says it is for existing CS2 users only & the line install a special version that does not require activation -
doesn't scream it'd be a problem to load it especially since I already own a later version that I can't use the plugin on - …I don't find the site all that informative. I appreciate all the answers & responses to my use of CS2 but I'd really just like to receive an answer to the original question of if the plugin works with it or not…if anyone has that answer I'd appreciate it.
Is there a place I can purchase it? I will gladly do so if I can get the plugin to work-that is my goal.

Problem reading dng files into Photoshop CS6

Why can't I read dng files from a canon 5dmk2 from ACR8.1 into Photoshop cs6?

I converted the CR2 files from the Canon5dmk2 into dng using the Adobe DNG converter.
In Photoshop CS3 I can read these dng files into Adobe Camera Raw and then export them into Photoshop. No problem.
I have just installed Photoshop CS6. I can read the dng files into Adobe Camera Raw (v8.1) without a problem. However the file is then corrupted when I try to export it into CS6.
Strangely, I have similar files converted from CR2 to DNG for a Canon 1100D and these read without problem via ACR into both Photoshop CS3 and CS6.
The problem is that Photoshop CS6 will not read dng files from a Canon 5dmk2.

CS6 photoshop disapears durning inital install?

CS6 photoshop disappears during end of initial install, warning pops up on start saying you may have a pending restart? Ignore yes or no. Windows 7 is current will all updates no pending updates.

Restart your computer. Are you able to uninstall Photoshop? If so, uninstall and run the CC Cleaner tool: Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6. Now re-install.
Benjamin

Installing problem on IMAC of CS6 PHotoshop

Similar Messages

Maybe you are looking for