Installing PSE 9 on new iMac with no CD Drive.

I bought a new iMac and cannot figure out how to install a new copy of Elements 9. I have a disc that I previously used to install on my Macbook, but now I do not have a Cd drive on my new computer. Tried to transfer the software using an external hard drive but it did not work. Any help?

First of all this:
Tried to transfer the software using an external hard drive but it did not work
Did you try to migrate an installed version of PSE? If so, you have your work cut out for you before you can install it.
As for the disc, if you have access to another computer, even a windows computer, you can copy the files from the disc to something like a thumb drive and use that. If you're near an Apple Store they will sometimes let you make the copy there.

Similar Messages

How can I install cs3 on new iMac with no disc drive?

I purchased cs3 and have all the original discs and serial number but can't use them so easily with the new macs... I have read the other discussions and tried the links to download the cs3 trial and then imput my serial number.
http://prodesigntools.com/download-adobe-cs4-and-cs3-free-trials-here.html
the links that are on this page give me http error: 404 message
Is it just me? Do these links no longer work? Does anyone have anyother ideads on how to get around this?
I'm not completely ignorant about computers- ignorant enough for this to be a very frustrating Saturday morning though... and the Adobe chat is of no help which only make me want to punch an install disc even more.
any help is appreciated
Thanks!

I was signed in with download assistant, no just in at adobe.com... I've tried different perferences and settings but when I click on the links nothing seems to happen. I've been messing around with this for a few hours now and it dawned on me that it may have something to do with my internet. I live outside the city- totally nice for gardening, totally terriable for internet thus I have a verizon data plan and not unlimited internet, I think possibly verizon is shutting it down because of restrictions I have on my data. This type of thing also happened when I upgraded to Mavericks. The file itself was larger than my month's data so it seemed like it wouldn't initiate the download... I don't know for sure if it is the same problem here but if you're telling me that you are having more successful results than I am that might be the reason.
I'll take my computer to work or to my mom's house or somewhere where I can have unlimited access and see if I have any better success.
Thanks so much for all your help!

How do I download/install Photoshop & Premiere Elements 10 on new iMac with no disc drive?

My iMac hard drive recently failed and I lost everything. I just bought one of the new iMacs with no disc drive. I had purchased Photoshop CS5 in 2011 but it came with CD's for install. I stil have them but it doesn't do me any good since there is no disc drive to put them in on the new computer. How can I install Photoshop using my serial number from my original purchase? I downloaded the CS6 trial version and when I try to activate it with my old serial number it says it is invalid.

There are links to trial installers on pages:
http://prodesigntools.com/all-adobe-cs5-direct-download-links.html
http://prodesigntools.com/photoshop-elements-10-direct-download-links-pse-premiere-pre.htm l
Very carefully read and follow the instructions on the pages!
Download and install the trials, launch and activate them with your serial number then do 'Help > Updates'.

How can I install Photoshop CS5 on a new iMac with no disc drive

How can I install Photoshop CS5 on a new iMac with no disc drive?

Hi,
Please copy this Link http://trials2.adobe.com/AdobeProducts/PHSP/12/osx10/Photoshop_12_LS1.dmg?PID=2159997
Now open Adobe.com and go to Products Trials. Click on Acrobat Try now and once the download page appears then paste the above mentioned link in the address bar and then press Enter. Download should start immediately.
Please let me know if it helps.
regards,
Abhijit

I just bought the new IMAC with the Fusion Drive 3t. Can I use the Bootcamp systemwith it? If not what do you suggest? I relly need the bootcamp for quicken

Good morning,
I just bought the new IMAC with the Fusion drive 3T. Can I use it with bootcamp beacuse I need for Quicken?If not any suugestion?

You can't use Boot Camp in 3 TB drives. You can download VirtualBox, Parallels or VMware Fusion and install Windows on a virtual machine. See > https://discussions.apple.com/docs/DOC-3321

How to get batch recognition of (!) on some tracks after moving library from external hard drive to new iMac (with terabyte hard drive)?

I'm using Lion 10.7.2 and iTunes 10.5.2
I have moved my iTunes music from an external hard drive onto my new iMac (with a terabyte hard drive) with music folder organized - when I try to play some tracks I get the iTunes can't locate warning and so I follow through and show iTunes the track - they are all in the music folder on my iMac hard drive - they all copied over and they all appear in the iTunes library list - so far as I can tell out of a 500 gigabyte music collection - but there are so many giving me the error - many other tracks function as they should too, some work others don't - So I'm looking for a way to get all the error tracks fixed in a batch correction way. Doing this individually with each track just isn't realistic.
Can anyone suggest how I might fix this issue?
Also, after I show iTunes the song location and it plays, I get a find files prompt that looks like it wants to find other files, but that just causes the process to jam and I have to force quit iTunes and then it doesn't remember what I last showed it next time I open iTunes.
Also I'm trying to avoid the use of the consolidate function because that would copy a whole other set of music - not in iTunes - that is in the process of being edited (audio hijack pro and fission tools being used to put vinyl and tapes to mp3) But all that other music just means the consolodate function across my whole computer would be too much.

Some details seem to be coming into focus - I have started scrolling through the main library list A to Z repairing tracks individually (there are thousands, but it's what works so far) - as I work through, it appears the problem occurred on tracks where album artist metadata was different than song artist metadata, predominantly. I'm not sure that is 100% the case in every instance, but that is what it's looking like. I don't why that happened, must be some technical glich I guess.
Also, I tried running Doug's Scripts - the one titled, iTunes Track CPR v1.3 - it is supposed to fix exactly the kind of issue I'm having - I bet it would work for some people with a similar issue - but for my case it only identifies the 'de-linked' tracks and doesn't repair them - that is at least helpful as I scroll though to fix them - I can see exactly which tracks have the issue quickly after running that script - but iTunes doesn't remember that warning symbol after a log-out, so it's only worth running the script on a set of tracks I intend to review and fix in any given session at a time.
If you are interested, Doug's free scripts can be found at
http://dougscripts.com/itunes/scripts/ss.php?sp=itunestrackcpr
there are other interesting and useful iTunes scripts there too...
also, unrelated to the issue I'm having, I found a lot of really useful and time saving metadata fixing free scripts at - hubi's iTunes scripts - the page isn't English, but the script download is easy to find -
hubi's scripts work for batch selections of tracks - so if you import an album and find the metadata screwed up somehow, you can select the whole set of screwed up tags at once (even across a series of albums), run the easy to use script, and watch it all be fixed automatically while you sit back and relax...
http://hubionmac.com/wordpress/category/softwareschmiede/applescripting/itunes/
just for reference, here is a sampling of what hubi's scripts can do...
there are other useful scripts out there - the tough part can be finding the one that helps you...
01-(un)capitalizes
01-(un)capitalizes
This script changes.... THIS TEXT into This Text... or this text
01-Delete spaces
Sometimes invisible blanks are behind an artist name or album name...this script deletes these blanks behind or infront of the strings
01-Delete x first-last chars. of Title
A Name like "01--Ray Of Light" will be changed to "Ray Of Light" and the01 will be entered in the tracks tracknumber id3 field =)
01-fix combined Artist-Title
Sometimes Tracknames look like:
"Madonna---Ray of Light" and in the artist field you see something like"Ripped by Me"... this script puts Madonna back to the right field... all youhave to do is to enter the right delimiter ("---" in this case)
01-switch Artist<->Title...
Switch ID3 field a with ID3 field b (not only Artist with Title any more =)!
01-z_filename ->Title
Sets the ID3 field Title to the track's filename)
01-z_trackNr-Filename->ID3
When a track's filename look like "01-Madonna-Ray of Light.mp3" andyou don't have the track's tracknumber stored in the ID3 Tag... this Scriptcan do this for your =)

I recently purchased a new iMac with an external drive. I want to transfer my files from my old iMac to the external drive, but I'm afraid that doing that will compromise the use of the external drive on my new iMac. Comments? Help?

I recently purchased a new iMac with an 1 Terrabyte external drive. I want to transfer my files from my old iMac to the external drive, but I'm afraid that doing that will compromise the use of the external drive on my new iMac. I have not downloaded the external drive's software onto my old Mac because of this concern. May I simply "drag and drop" the contents I want transferred to the external drive, then set up my new Mac with the drive and download there? or is there a better procedure? Comments? Help?

If your intention is to copy a just documents and data (word processing files and music for example) then yes, you can use drag and drop. If you want to transfer data and applications and permissions, it would actually be easiest to connect the drive to your old computer and turn on TimeMachine. Once TM is finished, connect the drive to your new computer and restart it holding the option key to get into Recovery mode. Then you can use the restore from TM option to transfer your data and programs to the new computer.

Can you attach an external HD to the new iMac with a fusion drive?

I'm trying to decide how to configure the new iMac I am going to buy. Can you attach an external HD to an iMac with a fusion drive? I'm assuming it would be fine, but since the fusion drive is new, I don't want a nasty surprise. Some of the new Mac Minis now have fusion drives, so has anyone added an external drive to it?

This was a concern expressed in this thread: Worrying reply to Apples FAQ on new Fusion Drive
However, Apple has since amended the FAQ, clarifying their earlier Fusion confusion.
Therefore I believe the answer is yes, you can add an external USB HD. If Apple would only state that explicitly in this document, it would eliminate all doubt.

Trying to install iwork '09 from dvd on new imac with no dvd drive.....iwork is brand new (bought off ebay) in unopened box....I have at my disposal an older imac with dvd drive and a 16GB thumb drive...what is best way to load iwork on the new imac?

bought my mom a new imac this xmas...didn't realize it has no dvd drive....just picked up a new unopened version of iwork '09 for her to use off of ebay....need to get it loaded on the new dvddriveless imac......I have an imac at my house with a drive and a thumb drive i could bring over to her house if I could somehow burn an image of the iwork dvd on the thumb drive...is this possible? is there a better solution other than buying an external dvd drive?

First use Disk Utilty to make a disk image of the iWork disc on your iMac. Then there are two easy ways to install on your mothers new iMac. One is to copy to your USB thumb drive, visit your mother and install from the thumb drive. The other is to use a free upload and download service like www.wetransfer.com. Upload the .dmg disk image via www.wetransfer.com, then your mother downloads and installs. After installation you'll need to update iWork for Mountain Lion compatibility.

Installing photoshop elements on imac with no disc drive

I purchased Adobe Photoshop elements 9 a year or so ago. I still have the installation disc and all the packaging that came with it. Unfortunately my imac crashed and I had to purchase a new imac. I would like to install this program on my new computer but there is no disc drive on it. Also there are no instructions included that direct installation without using the disc. How can I get this installed on my imac so that I can use it again?

You can download the trial version of the software from the page linked below and then use your current serial number to activate it.
Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site or else the download will not work properly.
Photoshop/Premiere Elements 9:
http://prodesigntools.com/photoshop-elements-9-premiere-elements-9-direct-download-links.h tml

Time Machine stalls on first backup of new iMac with 3TB Fusion Drive

I've got a brand new 27" iMac with latest patches up to OS X 10.9.1. I've loaded about 500GB of data onto this machine and wanted to make an intial Time Machine backup, so I connected a brand new 4TB Seagate Backup Plus USB 3.0 external hard drive, formatted the drive as Mac OS Extended (Journaled), pointed Time Machine at it, and let it go. It ran up to about 30GB before I walked away. When I came back maybe 8–10 hours later it was still stopped at about 30GB. I stopped it, and tried again. This time it just went a couple of GB before halting. I can hear the external drive stop spinning because it isn't being accessed.
I also have a new 2TB Western Digital My Passport USB 3.0 external drive, so I formatted that as Mac OS Extended (Journaled) and tried setting it as the Time Machine drive instead. Again Time Machine gets a little way into the backup before stalling and proceeding no further. I think this rules out the drive, since both drives behave the same way.
I also have Super Duper installed on this machine, so I tried doing a full disk copy to the WD drive and this worked flawlessly. This suggests that nothing is wrong with the drives themselves, as does the successful check of all three disks with Disk Utility.
I've checked "Prevent computer from sleeping automatically when the display is off" in Energy Saver. I've unchecked "Put hard disks to sleep when possible". I've checked "Enable Power Nap". I set Time Machine back to using the 4TB Seagate Drive and have been letting it run as long as it wants to. It got up to 13.32GB this morning before seeming to stall this morning. 10 hours later when I got from work it's still at 13.32 GB and it still says "About 7 hours remaining", just as it did at 8:30am.
I've read a bunch of discussions on here about issues like this, which is where I came up with some of the things I've tried. So far, nothing has worked. Can anyone suggest a working solution? It seems like the Time Machine software just isn't workin

Pondini's site is excellent, but didn't happen to cover this problem (or Mavericks in particular as of yet). But I did call AppleCare support as you suggested, rkaufman87, where I was quickly escalated since I'd already tried the things the first tier support people start with. After some investigation via screen sharing and inspection of my system log (which suggested the stall involved issues with the index) the main change we made was to clear out the Time Machine preference files and Spotlight's cache before rebooting and trying again. This time the backup completed without stalling, and has continued to work ever since. Thanks for encouraging me to call support!

How do I install CS5 on new iMac without a disc drive, if remote installation isn't working?

I purchased CS5 for my laptop (Macbook Pro 2007 I believe) and now have the newest iMac without a disc drive. I have tried remote installation, but it did not work. I attempted to copy the installation files onto a USB and then transfer them, however, the iMac then prompts me to insert the installation cd. How can I install it? Any help is greatly appreciated! Thanks!

I was signed in with download assistant, no just in at adobe.com... I've tried different perferences and settings but when I click on the links nothing seems to happen. I've been messing around with this for a few hours now and it dawned on me that it may have something to do with my internet. I live outside the city- totally nice for gardening, totally terriable for internet thus I have a verizon data plan and not unlimited internet, I think possibly verizon is shutting it down because of restrictions I have on my data. This type of thing also happened when I upgraded to Mavericks. The file itself was larger than my month's data so it seemed like it wouldn't initiate the download... I don't know for sure if it is the same problem here but if you're telling me that you are having more successful results than I am that might be the reason.
I'll take my computer to work or to my mom's house or somewhere where I can have unlimited access and see if I have any better success.
Thanks so much for all your help!

Can I install Aperture 3 on iMac with no disc drive

Is it possible to install Aperture 3 on iMac using product serial number (my PC has no disc drive)?

There is no longer a way to download a full version of Aperture from Apple's sites, other than the most recent version from the App Store. If you still have the installer disks, try to borrow an external DVD reader or ask a family member/fried with a computer that still has a DVD drive to create a disk image from the DVD. Then copy the Disk Image to a thumbs drive. If a Mac with a DVD drive is available on your local network, you could try DVD sharing.
http://support.apple.com/kb/HT5287

"No Boot Disk" on new iMac with external optical drive

So I am experiencing a problem similar to what some people have had, but I have the brand new iMac which does not come with a cd drive.
I have a fusion drive in the iMac.
I downloaded Windows 7 Ultimate from my University software store, which gave me a .img file. I burned this file to disk in order to make the boot drive.
I am using an amazon basics DVD optical drive which connects to my computer via USB.
Upon boot into windows, it does not recognize the dvd in the drive as bootable, and says "No Bootable Disk Found, Press Any Key". Of course, I have a bluetooth keyboard and cannot press any key because there are currently no drivers.
So, any ideas on why it won't recognize my boot dvd?

It was just a simple case of removing the verbose boot settings which I found a script for after searching on Google.

My (brand new) imac with flash hard drive freezes after mavericks update

after updating to the new mavericks my new imac has been slowed down -
when scrolling in finder to select files and tag them it freezes and "thinks" after each file
your help appreciated
its brand new ( only a month old ) and was lightning fast before

after updating to the new mavericks my new imac has been slowed down -
when scrolling in finder to select files and tag them it freezes and "thinks" after each file
your help appreciated
its brand new ( only a month old ) and was lightning fast before

Installing PSE 9 on new iMac with no CD Drive.

Similar Messages

Maybe you are looking for