Installing Quick VPN Client on Windows 8.1
Hi Guys
We use Quick VPN Client to connect to our office using the RV016 VPN Router.
The QuickVPN Client works fine on Windows XP, Windows 7. It also worked fine on Windows 8 initially.
Recently we noticed that when we try to use the QuickVPN Client to connect to our office VPN, the client application is just waiting and showing the message connection and not proceeding any further from that screen. Becuase of the we are unable to connect to our office VPN from Windows 8 or 8.1.
Does anyone here has some useful tips to make the QuickVPN Client work again successfully from Windows 8 or Windows 8.1?
Looking forward to hearing from you guys
Regards
Jo
I've been able to use Quick VPN successfully on several Windows 8 and 8.1 machines by doing the following:
Right-click on the Quick VPN desktop shortcut and then click on the compatibility tab. Under "compatibility mode, select, "Windows Vista (Service Pack 2); under "Settings", click, "Run the program as an administrator".
In Windows firewall advanced settings, add inbound and outbound allow rules for port 60443.
In Windows firewall advanced settings, add an outbound allow rule for ICMPv4
If you're using Adobe Creative Cloud, you'll need to quit the Creative Cloud Desktop application in order to use Qucik VPN. CEFHelper.exe (used by the Creative Cloud Desktop application) has a dependency/lock on wget.exe, and will cause Quick VPN to not respond at the certificate recognition phase. Quitting the Creative Cloud Desktop application (and thereby killing CEF Helper) allows Quick VPN access to wget.exe and it will then function normally.
**Edit; addendum** Windows updates as of 2013-04-20 require that rules in Windows firewall advanced settings be established that allow wget.exe both inbound and outbound. Path is %ProgramFiles% (x86)\Cisco Small Business\QuickVPN Client\wget.exe for 64-bit Windows machines.
Similar Messages
-
Unable to install Cisco VPN Client on Windows 7
Hello,
After a successfull uninstallation of Cisco VPN version 4. I try to install Cisco VPN Client version 5.0.07.0290.
But after launching vpnclient_setup.msi, the wizard is starting. When I click on Next button, I have the following message: "installation ended prematurely because of an error".
In attachment, I add the details of the error find in the windows logs (logError.txt) and the logs generated from MSI installer in verbose mode (log2.txt).
My computer is a lenovo W500 with Windows 7 64 bits and 4 GB of memory (compliant with the Cisco VPN Client requirements).
I have administrator privileges on this computer.
Please help me !
I need to use it to connect to my company network.
Thanks in advance.
BR
JeromeYou should be able to install the 64 bit version of the Cisco VPN software
Latest version is vpnclient-winx64-msi-5.0.07.0440-k9.exe
Using Shrew VPN is a workaround more than a solution / answer to this issue.
You should download and run MCPR.exe first, to clean out any traces of McAfee products that conflict with Cisco VPN.
http://download.mcafee.com/products/licensed/cust_support_patches/MCPR.exe
If there is a problem with vbscript registration on the system - there is a fixit tool from Microsoft for that:
MicrosoftFixit50842.msi -
I cannot install Cisco VPN Client 64-bit in windows 8
Hi
I bought new laptop which is preinstalled with widows 8 EM OS.. But for my usage i need to install cisco vpn client (64-bit version) software in my windows 8 EM OS.. which i cannot proceed actually because of the following error :
Error 28000 : Before installing the cisco systems vpn client 5.0.7.0290, you must uninstall the previous version of cisco systems vpn client 5.0.7.0290, using the Add/Remove program files option in the control panel, then restart your system
Following the above popup again a popup prompts displaying :
I have tried to uninstall the program from control panel but i could not find vpn client installed in my system at all... Please give me suggestion how to uninstall and install the new one..
Could you please advise how i can resolve the above issue and setup Cisco vpn client in my windows 8 OS? your reply is more worthy to carry on my work...Hello,
The TechNet Wiki Forum is a place for the TechNet Wiki Community to engage, question, organize, debate, help, influence and foster the TechNet Wiki content, platform and Community.
Please note that this forum exists to discuss TechNet Wiki as a technology/application. If you have a question about another technology (such as Windows), you can ask in another forum. If you're unsure which forum, a Bing search often works the fastest or ask
here: http://social.microsoft.com/Forums/en-US/whatforum/threads
However, I'd ask in the
Windows 8 forum on Microsoft Community.
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book: Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C40686F746D61696C2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}}) -
Hi Gurus,when I tried to install Cisco VPN Client 5.0.07.0440 on Win 7 64bit, the system would pop up an Error 1722( Error 1722. There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor.) at the last stage of copying files. Then it would roll back .
I had tried to clean the temp files, restart windows installer services, and also re-register the MSIEXEC file. However, it would still pop up the error during the installation. For our company, it is a common issue. So, could you please offer me some advice on this?Thank you for your reply.
I had checked the software again and found out.
1. The MSI installer package is fine, because I can install the software on another PC.
2. It is not like that, because I can start the installation procedure and run it smoothly until on the 88% of copying files.
For now, I had only found this issue on one PC.
Thanks. -
How to create a VPN client for Windows Phone 8.1?
We have our own VPN client for Windows and Android. I would like to create a VPN client for Windows phone 8.1. After referring these site I found that there are some third
party VPN plugins available for WP 8.1.
I checked OpenVPN but it is also not available for WP 8.1.
Is there any APIs available for creating a VPN client in WP 8.1 similar to
VpnService provided by Android SDK ?The VPN APIs for WP8.1 are not open at this time.
Matt Small - Microsoft Escalation Engineer - Forum Moderator
If my reply answers your question, please mark this post as answered.
NOTE: If I ask for code, please provide something that I can drop directly into a project and run (including XAML), or an actual application project. I'm trying to help a lot of people, so I don't have time to figure out weird snippets with undefined
objects and unknown namespaces. -
Router WRV54G Quick vpn client 1.10 ruuing on XP (remotel...
router WRV54G
Quick vpn client 1.10 ruuing on XP (remotely)
well, the client can connect to VPN router and i can verify the status online on tab vpn BUT
after 2-3 min. client receive the error message
"the gateway not responding"
AND
if client tries to ping from command prompt to the local ip addresses he find "negociating IP security"
status of router is :
- all security including firewall is disabled
- i have public IP address on Router having 255.255.255.0 subnet
- my local subnet is 10.10.1.x
please tell me what should be done
Thanks
Message Edited by SHAQ on 12-18-2007 09:26 AMtry upgrading / reflashing the firmware of the wrv54g to the latest available from www.linksys.com/download
try changing the MTU size on the client router to 1452
check whether it makes any difference -
Where to get the "Linksys Quick VPN client" for my RV082
I tried some links like http://linksys.com/support
but that one is broken.
So where can I get the "Linksys Quick VPN client"
Not for 50 clients only need is for 3 clients, but still need a client to download.Hi awestin, please be directed to the Cisco Small Business Community as they are now the ones providing support for the RV082.
https://supportforums.cisco.com/community/netpro/small-business
The Search Function is your friend.... and Google too.
How to Secure your Network
How to Upgrade Routers Firmware
Setting-Up a Router with DSL Internet Service
Setting-Up a Router with Cable Internet Service
How to Hard Reset or 30/30/30 your Router -
RV042 quick VPN client cant ping lan network
Hi guys,
I've just created a client2gateway IPSec tunnel on RV042 and use Quick VPN client on remote PC trying to connect this router.
Quick VPN showed the tunnel was establised. But I couldn't ping the Lan network behind the router RV042.
Can anyone help me ?
Thanks.Hi,
I modified the client2gateway mode to Client access mode.
Now I can ping (from QuickVPN client) to 172.16.1.0/24 network behind the router RV042.
But if I put another subnet as 10.92.x.0 behind this router, I still can't ping. Since Client access configuration is too simple, I cannot find a way to modify the subnet.
Seems 172.16.1.0 is default. Am I right? -
Cisco VPN Client and Windows XP Home
Hello,
I cannot find any information to tell me whether Windows XP Home (Not XP Professional) is supported under ant Cisco VPN client 4.xx or 5.xx.
We have several "home" users and when trying to install it just causes the pc to do a looping reboot.
Can anyone advise please ?
ScottScott,
Not sure if you read the release notes, but here they are are for V4.06 and V5.0:
http://www.cisco.com/en/US/docs/security/vpn_client/cisco_vpn_client/vpn_client46/release/notes/46clnt.html#wp1207576
http://www.cisco.com/en/US/products/sw/secursw/ps2308/prod_release_note09186a0080884df5.html#wp1207576
I'm not seeing anything that prohibits XP Home, but there are several caveats that may have direct bearing on why your user's can't get it installed (administrative access to internal firewalls).
HTH
Steve -
VPN Client and Windows Folder Synchronisation
We are currently having problems with Windows XP Laptops which have folders Synchronised to Servers.
When they are working remotely, they use the VPN client to connect to the network. Unfortunately, the VPN Client Adapter does not appear in the "Network Connection" drop down menu within the Synchronisation Setup screens. This means that the synchronisation takes place once the Physical Adapter (LAN or Wireless) comes active and an error message appears everytime.
Has anyone come across this and found a fix for it ? There must be a away of getting the VPN LAN Adapter into the Synchronisation Network Connection list.The only supported IPSec client for Windows 7 is 5.0.6. I would recommend uninstalling the client version that you have, upgrade the DNE package from Citrix, and then install the latest IPSec client.
Release Note:
http://www.cisco.com/en/US/partner/docs/security/vpn_client/cisco_vpn_client/vpn_client5006/release/notes/vpnclient5006.html#wp62415
DNE Update:
http://www.citrix.com/lang/English/lp/lp_1680845.asp
Client Download:
http://tools.cisco.com/support/downloads/go/ImageList.x?relVer=5.0.06.0110&mdfid=281940730&sftType=VPN+Client+Software&optPlat=Windows&nodecount=2&edesignator=null&modelName=Cisco+VPN+Client+v5.x&treeMdfId=268438162&treeName=Security&modifmdfid=&imname=&hybrid=&imst=&lr=Y -
VPN Client and Windows 7 - Window won't show
Bizarre issue I've now experienced on two separate PC's with VPN Client 5.00.07.0410 on 32-bit Windows 7:
Out of the blue, when the user double-clicks the Cisco VPN Client icon, the lock shows up in the system tray, and the application shows in the taskbar. You may get a glimpse of the window when you double-click the taskbar icon, or single click it and choose the application from the list. However, you are not able to actually get the window to be visible. This of course makes it impossible for the user to click the "connect" button.
I've discovered that when the icon is in the taskbar, and you hit "Enter" on the keyboard, it will connect. However I wouldn't expect a user to be able to figure this out, and so it was quite frustrating for them when this happened.
I've noticed there is a new version of the software for 64-bit users, but not for 32.
Anybody else experience this? Find a solution?
I tried uninstalling/re-installing and it made no difference.
-ChrisTry this so you don't have to do it each time... it worked for XP Pro 32-bit (Dell E6410). Haven't yet encountered on W7 Pro:
Bring up Task Manager (Ctrl+Alt_Delete). Open the Applications tab. Highlight VPN Client, right-click and select Maximize. (Sometimes if the system dies (power-loss) when connected to VPN the registry remembers the minimized setting and will not un-minimize it except with this process (and maybe one yet to be determined).)
I'm currently working (20140617) on a similar issue for W7 Pro for the User Authentication window where the RSA passcode needs to be entered. Alt-Tab works but I'm trying to make it permanent. (One problem is the user has a difficult time following instructions.) -
VPN Client and Windows 7 Issue
Using VPN Client, V5.0.07.0440 a Dell Vostro W7 Professional system, 64 bit. The client installs and runs the same way it has on at least 20 other systems without issue. When I try to remote into the network, I get a "can not connect" error attempting to connect to any system or server. I placed a known good laptop using XP on the same internet line, it connects without issue. The remote access (mstsc.exe) verson is 6.1.7601.17514 there is no Admin switch in the shortcut. This is the first time anything like this has happened, numerous W7 32 and 64 bit and XP systems. Any help greatly appreciated.
Thanks
It's like the VPN connects to the network, but the remote access is not using the same connection. I get the same results whether the VPN Client is loaded or not.
Sure could use some help on this.The system that I am trying to connect with is a Dell Vostro desktop, W7 64bit Pro. I am attempting to connect to a Windows 2003 domain thru a PIX 501 firewall. The desktop system uses an onboard Ethernet adaptor connected to the Internet thru Charter. I do not have ready access to the computer as it's my employers home system. The frustrating thing is, I have installed and set this up on at least 30 other systems and all of them worked flawlessly. Of course, this one would be the problem as it belongs to my boss.
Thanks for responding, I plan on picking up the unit so I can devote some real time to fixing it.
Thanks again -
How to enable traffic between VPN clients in Windows Server 2012 R2?
Hello,
I installed Remote Access role with VPN.
IPv4 Router is enabled: http://snag.gy/UAMY2.jpg
VPN clients should use static ip pool: http://snag.gy/REjkB.jpg
One VPN user is configured to have static ip: http://snag.gy/TWwq0.jpg
VPN server uses Windows Authentication and Windows Accounting.
With this setup, VPN clients can connect to server, get ip addresses and can see server via server's vpn ip. Server can connect to VPN clients too (Using client's vpn ips). But VPN clients can't communicate with each other.
For example, VPN server has ip 192.168.99.5
VPN Client 1 - 192.168.99.6
VPN Client 2 - 192.168.99.7
I am able to ping 192.168.99.5 from both clients, and able to ping 192.168.99.6 and 192.168.99.7 from server via remote desktop. But I am not able to ping 192.168.99.7 from client 1 and 192.168.99.6 from client 2.
If I trace route from 192.168.99.6 to 192.168.99.7 - I can see that packets goes to server (192.168.99.5) and next hop - request timeout.
What else should I configure to allow network traffic between VPN clients?Hi,
To better analyze this issue, would you please post the routing tables on the two VPN clients? You can run "route print" at the command prompt to get the routing table.
Best regards,
Susie
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] -
Cisco VPN Client after Windows Vista Update (KB941229)
I had the Cisco VPN client 5 installed on my laptop and configured by the IT department at work. It was working fine all day until I restarted and KB941229 was automatically installed. When it turned back on the Cisco VPN service (CVPND) would attempt to run then stop. If I started it manually it would run for about a minute then stop again. Without the service running the VPN client won't open, let alone let me connect.
I know this vista update is fairly recent so I'm not sure there will be a fix but maybe somebody can think of a workaround or some way to fix this situation.
Things I've tried:
1) Uninstalling the windows update
2) restarting
3) restarting (in denial that this was happening)
4) configuring a vista VPN connection to attempt to connect to the company VPN (this failed too)
Uninstalling the update caused me to be unable to ping for some reason. This meant the VPN client would run but be unable to connect to the server and yet I was entirely able to access the internet locally. I reinstalled the update assuming maybe the installation went badly but that caused the same problem with the VPN service stopping itself (or being stopped) after a minute.Hello
my issue has been resolved.
there is a service called Base Filtering Services running in background for Vista and has to disabled to make IP Sec VPN Client working.
after doing so it works smoothly.
- Dhaval Tandel -
Error Installing Cisco VPN CLIENT 5.0.02.0090 on Domain Connected Client
When installing the Cisco Client version 5.0.02.0090 I get an error when installing it on a Windows XP PC that's connected to a Windows Server Domain.
More INFO:
Windows XP Dutch SP2
Connected to Windows 2000 Domain
Works on another Dutch Windows XP SP2 system that is NOT connected to a domain!
Last lines of the setup logfile:
Property(S): CURRENTDIRECTORY = C:\DOCUME~1\J6299~1.HIE\LOCALS~1\Temp\RarSFX0
Property(S): CLIENTUILEVEL = 2
Property(S): CLIENTPROCESSID = 4232
Property(S): VersionDatabase = 200
Property(S): VersionMsi = 3.01
Property(S): WindowsBuild = 2600
Property(S): ServicePackLevel = 2
Property(S): ServicePackLevelMinor = 0
Property(S): MsiNTProductType = 1
Property(S): WindowsVolume = C:\
Property(S): RemoteAdminTS = 1
Property(S): GPTSupport = 1
Property(S): OLEAdvtSupport = 1
Property(S): ShellAdvtSupport = 1
Property(S): Intel = 15
Property(S): PhysicalMemory = 2046
Property(S): VirtualMemory = 3448
Property(S): AdminUser = 1
Property(S): LogonUser = j.hiemstra
Property(S): UserSID = S-1-5-21-3206282357-3970063792-383977586-1104
Property(S): UserLanguageID = 1043
Property(S): ComputerName = FMGPCHIEMSTRA
Property(S): SystemLanguageID = 1043
Property(S): ScreenX = 1280
Property(S): ScreenY = 1024
Property(S): CaptionHeight = 19
Property(S): BorderTop = 1
Property(S): BorderSide = 1
Property(S): TextHeight = 16
Property(S): ColorBits = 32
Property(S): TTCSupport = 1
Property(S): Time = 15:09:38
Property(S): Date = 3-1-2008
Property(S): MsiNetAssemblySupport = 2.0.50727.1433
Property(S): MsiWin32AssemblySupport = 5.1.2600.3019
Property(S): RedirectedDllSupport = 2
Property(S): DATABASE = C:\WINDOWS\Installer\42637aeb.msi
Property(S): OriginalDatabase = C:\DOCUME~1\J6299~1.HIE\LOCALS~1\Temp\RarSFX0\vpnclient_setup.msi
Property(S): UILevel = 3
Property(S): ACTION = INSTALL
Property(S): CsProp_CopyInstHelperDll = 1
Property(S): CsProp_LogViewer = Non-Existant
Property(S): CsProp_VPNClient = Non-Existant
Property(S): CSPROP_MSTCPIP = 1
Property(S): CsProp_RebootNeeded = 2
Property(S): ROOTDRIVE = C:\
Property(S): CostingComplete = 1
Property(S): OutOfDiskSpace = 0
Property(S): OutOfNoRbDiskSpace = 0
Property(S): PrimaryVolumeSpaceAvailable = 24732144
Property(S): PrimaryVolumeSpaceRequired = 43556
Property(S): PrimaryVolumeSpaceRemaining = 24688588
Property(S): PrimaryVolumePath = C:
Property(S): SourcedirProduct = {871DF2BE-41D2-4334-AC33-839AF16FC8FE}
Property(S): CsProp_GetDriveType = 3
Property(S): GROUP_USERS = Users
Property(S): GROUP_INTERACTIVE = INTERACTIEF
Property(S): GROUP_LOCAL_SYSTEM = SYSTEM
Property(S): GROUP_ADMINISTRATORS = Administrators
MSI (s) (9C:78) [15:09:38:041]: Note: 1: 1708
MSI (s) (9C:78) [15:09:38:041]: Product: Cisco Systems VPN Client 5.0.02.0090 -- Installation operation failed.
MSI (s) (9C:78) [15:09:38:041]: Cleaning up uninstalled install packages, if any exist
MSI (s) (9C:78) [15:09:38:041]: MainEngineThread is returning 1602
MSI (s) (9C:30) [15:09:38:056]: Destroying RemoteAPI object.
MSI (s) (9C:50) [15:09:38:056]: Custom Action Manager thread ending.
=== Logging stopped: 3-1-2008 15:09:38 ===
MSI (c) (88:68) [15:09:38:072]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (c) (88:68) [15:09:38:072]: MainEngineThread is returning 1602
=== Verbose logging stopped: 3-1-2008 15:09:38 ===
See attachemend for Error.
I get the error after the 'next' when the setup is 'ready to install', so after selecting the destination folder.
It happens in the Screen 'Updating system'
Oh yeah, I just install it from the C:\ Drive and not from a network path. Tried extracting the exe manualy also, nothing seems to help..I'm seeing the same error on our domain connected machines (Windows XP - German).
Adding the Users and INTERACTIVE accounts fixes the install issue, but the install process takes a few minutes to complete and the there are a lot of queries to the DCs.
Is there a fix?
Maybe you are looking for
-
Hi, i have an Old IPhone 3G is on IOS 4.2.1. Im wanting to get facebook on it which is currently at IOS 4.3. Is there anyway this can be done?? Thanks
-
Lumia 635 - Can't create FOLDERS from tiles on Sta...
I am unable to combine tiles to form folders of similar topics on my Start page. I followed the example shown in the little video posted in the user's manual, but it simply doesn't work as shown. Solved! Go to Solution.
-
Error 56 Occurs When Using TCP Read.vi
TCP Read gives Error 56: The network operation exceeded the user-specified or system time limit? TCP Read in my application in not reliable. It works sometime, but it fails some other time. I tried to read just 1 byte, and set time out to be 1 min, I
-
How can I embed glassfish openesb in a lightweight mode?
Is there a way embed a lightweight mode of glassfish esb? I want to use it as far ligntweight as possible,maybe just the jbi runtime,the core BCs,SEs.When try to install glassfish esb,I find netbeans,glassfish must exist.
-
The Glance Screen is not updated in Lumia Black Up...
Hello Nokia (and the rest of the forum) I just downloaded the new Lumia Black, which I was looking very much forward to because of the new Glance Screen. I've lokkede thoroughly through my Lumia 920 settings, but the Glance Screen doesn't seem to hav