Installing RAC Problem: Oracle Clusterware 10g is present on remote node

Folks,
Hello.
I am installing Oracle 11gR2 RAC using 2 Virtual Machines (rac1 and rac2 whose OS are Oracle Linux 5.6) in VMPlayer.
I have been installing Grid Infrastructure using runInstaller in the first VM rac1 from step 1 to step 9 of 10.
On the step 9 of 10 in the Wizard, accidentally, I touch the Mouse, and the Wizard is gone.
The directory for installing Grid in the 2 VMs is the same: /u01
In order to make sure everything is correct, I delete entire directory /u01 in the 2 VMs and install Grid in rac1 again.
But get the error message as follows:
[INS-40915] The Installer has detected the presence of Oracle Clusterware 10g on the remote node rac2.localdomain.
Cause: Oracle Clusterware 10g is present on remote node rac2.localdomain but not on the local node.
Action: To upgrade the Oracle Clusterware 10g Installation to this release, run Installer on a node where Oracle Clusterware 10 installation is located. To create a new cluster, choose a set of nodes that are not part of an existing cluster.
Regarding the above error message, I do not install any Oracle Clusterware 10g in rac2 because it's the first time when I install Grid using rac1 and rac2.
My question is:
Do any folk understand how to remove something in rac2 to solve the above issue so that I can install Grid again ?
Thanks.

Folks,
Hello. Thanks a lot for replying.
The tutorial http://docs.oracle.com/cd/E11882_01/install.112/e22489/rem_orcl.htm#CBHEFHAC is about the regular procedure to deinstall Grid Clusterware and Database.
I have just installed Grid and have not installed the Database. I have removed ORACLE HOME /u01 completely in both VMs. There is no way to follow the regular procedure to deinstall at this time.
I do not install any Oracle Clusterware 10g in the VM rac2 because it's the first time when I install Grid using VM rac1 and rac2.
When install Grid again. I get the error message:
"[INS-40915] The Installer has detected the presence of Oracle Clusterware 10g on the remote node rac2.localdomain."
This is strange! It seems that we need to remove some files in the VM rac2 like /etc/oracle that I am not sure.
My questions are:
First, where is 10g directory to remove ?
Second, what files left on the system to clean up ?
Third, what does " Follow 239998.1" means regarding asanqa's replying to me ?
Thanks.

Similar Messages

Check "Problem: Oracle Database 10g Release 2 can only be installed in new

Hi All
Installing 10g software on AIX Box in /oracle/oraHome2,where oracle9i is already installed in /oracle/oraHome1 and oracle inventory is in /oracle/inventory
In product specific prerequisite screen I am getting the
check:Oracle Home incompatibilties is failed I am getting the error
Check complete. The overall result of this check is: Passed
=======================================================================
Checking for Oracle Home incompatibilities ....
Actual Result: Oracle9i Database 9.2.0.1.0
Check complete. The overall result of this check is: Failed <<<<
Problem: Oracle Database 10g Release 2 can only be installed in a new Oracle Home
Recommendation: Choose a new Oracle Home for installing this product
though I am installing it in different oracle homes why i am getting this error?
Is it because 10g installation is picking the same oracle inventory /oracle/inventory
do i need to make different oracle inventory for different oracle homes???????plz confirm..is thats the reason i am getting this error??????
Thanks inadvance
Gagan

I figure out you are trying to install 10gR2 on top of an existing 9iR2 Oracle Home. This is corrected at the Path definition window. Most probably you just click on the <Next> and by default the 9iR2 Oracle Home was selected. You must define a new oracle home for the 10gR2 install.
~ Madrid

Oracle10g RAC with Oracle clusterware

Hi,
We are installing Oracle10g RAC with Oracle clusterware with ASM on Solaris 10. Does anybody have a installation/configuration manual for this combination.
Thanks,
Murtuja

Sun would not recommend using Oracle 10g RAC without Sun Cluster. Setup for that configuration would be found in the Sun Cluster Data Service for Oracle 10g RAC and the Oracle installation manuals.
The installation of Oracle Clusterware alone would be documented in Oracle's manuals. If you have any problems with that, you are better off asking Oracle.
Regards,
Tim
---

Install and configure Oracle AS 10g Business Intelligence Comp with SSO

Hi,
Present setup:
We have a Red hat Linux 3.0 ES (update 4).
Netgrity from Site minder installed over windows server for signle sign on.
Oracle 9i release 2 database on a separate Windows server
What i need:
I want to install Oracle Application Sever Business Intelligence Components 10G over the linux and configure with Netegrity Single Sign on. I am not clear what is the installation process and what is the sequence of installation and configuration.
Can anyone help me with the Installation process and sequence.
What should be the sequence is it like below ?
1) first install the Oracle AS 10g Infrastructure over the Linux
2) Secondly install the Oracle Application Sever Business Intelligence Components 10G and integrate with Infrastructure
3) Configure with SSO
or only install the Oracle Application Sever Business Intelligence Components 10G and Configure with SSO is enough ?
Any help in the installation process and sequence of instlallation and how to configure for external single Sign on.
Thanks..

When you want to have SSO you definitly need the infrastructure as the SSO is managed in there.
So first install the infrastructure, then the middle tier (BI components) and then configure the SSO for the BI components.
When this is up and running you have to configure the integration with the SiteMinder. Check out the OID admin guide and the SSO admin guide.
cu
Andreas

OIM 9.1.0 install connector for "Oracle Database 10g"

Hello,
Is anybody here who succeeded to install the connector for Oracle Database 10g into OIM 9.1.0?
If yes please give me a hint
Have a nice day!

Thanks guys for the quick responses.
But I have tried both the options for putting the jar in Third Party and also by uploading using the OOTB utility UploadJar.sh.
But it is giving the same error.
I have tired rebouncing the server and also Purge cached, but no success.
Just to mention again, I have tried with all the last 3 postgres JDBC4 driver available on the site (u mentioned).
So, any other clue?
Thanks in advance.

Download problems Oracle Database 10g Express Edition

Completed download.
Attempted to start application but cannot find the server.
Removed the software using add/remove programs.
Attempted to reinstall but it seems that some applications are still on my system.
Attempted to remove the application but the add/remove program does not recognized the application
What can I do.

Hello,
I need to install "Oracle database 10g Express Edition" with different database name example dev but it is taking
default name that is XE and there is no option come during installation where i can put the name of database as per my desire.First, note that you can't install more than one instance of XE per server. Changing the instance name won't help you with that.
As you've already found out, the installer always creates a database instance with default names. That's part of the "Express" concept: As little configuration as necessary to get a Oracle Database installed with just a few clicks. The second advantage is, that you can also simplify the documentation, as you can forget about several aspects when you don't have to configure them...
Since you don't have tools like dbca in XE, your only option would be to rename the database once it's created. There are a few threads on that topic in this forum, e. g. {thread:id=403056}.
But before you start working on that, could you explain why exactly you have to use a different database/instance name?
And also explain why we use "Oracle database 10g Express Edition" instead of Oracle database 10g. what is the meaning of Express Edition.Why and how should we answer why you picked a certain edition? The most likely cause is license costs: XE is available for free, all others are just free as long as you use the OTN license...
For an overview, there is a [url http://www.oracle.com/us/products/database/enterprise-edition/comparisons/index.html]Comparison Matrix for Oracle Database Editions.
I'd furthermore ask why you still use 10g XE instead of the current 11g XE?
-Udo

Oracle Portal 10g Powerpoint Presentation needed

Dear Friends,
Will you guys please point me to right location (URL) where i can download the powerpoint presentation of Oracle Portals 10g complete product presentation?
Thanks
Rengarajan

Rengarajan ,
I would check the following URL
http://www.oracle.com/technology/products/ias/portal/product_overview_10g1014.html
is the Product Overview page for portal product center and there is a section Demos and Presentations that should contain the OpenWorld presentation .
Cheers
Diego

Which is the difference between Oracle RAC and Oracle Clusterware?

Hi all, maybe this is a stupid question, but I've read the documentation, and still don't understand which is the difference between RAC and Clusterware.
Can anybody explain it to me?
Thanks in advance!

RAC is database option part of Oracle Database software needed to have database running in cluster mode; see http://download.oracle.com/docs/cd/E11882_01/server.112/e16508/glossary.htm#CNCPT2076.
Clusterware is separate software needed to run Oracle Database in cluster mode: you can use Oracle Clusterware without Oracle Database but you cannot use Oracle Database with RAC option without Oracle Clusterware.
See http://download.oracle.com/docs/cd/E11882_01/rac.112/e16794/intro.htm#BABCHEEE.
Edited by: P. Forstmann on 19 nov. 2010 19:11
Edited by: P. Forstmann on 19 nov. 2010 19:11

Installing and Conifuguring Oracle 9i/10g on Sun Solaris

Hi,
I am planning to install Oracle 9i/10g on Sun Solaris. Below are the activities I need to do. Can some body provide me Step-by-Step procedure to be followed for below activities.
     Pre-Installation Activities
     Creating a install User
     Configuring OS Memory and shared memories
     Creating distinct file systems for Oracle -- Capacity planning
     Installing the product
     Post product installations
Thanks in Advance
Sampath

Please have a look in the document "Installation Guide" found here on Oracle Technology Network (OTN). All your questions are answered there!!!

Install and config oracle database 10g release 2 in domain or LAN network

Please help me config oracle database in two case:
case 1: I want to install only one oracle database in a computer (Server) and other computers can connect and using it. I try to install oracle database in a computer (this is a Server computer). But database is used for this computer, other computers can't connect and using it.
case 2: If oracle database in a domain, can you help me install and config it.
example: my domain is: piacom.com.vn. All computers in this domain.
Thank !

Wich kind of installation did you use ?
Personal ? Enterprise ?

Problem on Installing RAC System - Oracle Linux 6.2 and 11gR2

Folks,
Hello. I just start to install 4-nodes RAC system using VMplayer 3. The host Operating System is Windows 7.
The Guest OS is Oracle Linux 6.2.
Because my computer's hard disk does not have enough space, I install the Guest OS Oracle Linux 6.2 into a external hard disk. But its speed is very slow. It has taken more than 24 hours by now, but still don't finish installing Oracle Linux 6.2.
Do any folk understand what's going on ? Is there any problem on Oracle Linux 6.2 ?

user8860348 wrote:
Folks,
Hello. I just start to install 4-nodes RAC system using VMplayer 3. The host Operating System is Windows 7.
The Guest OS is Oracle Linux 6.2.
Because my computer's hard disk does not have enough space, I install the Guest OS Oracle Linux 6.2 into a external hard disk. But its speed is very slow. It has taken more than 24 hours by now, but still don't finish installing Oracle Linux 6.2.
Do any folk understand what's going on ? Is there any problem on Oracle Linux 6.2 ?of course the problem is with Oracle Linux 6.2 & not with your VM implementation

Problem on Installing RAC System - Oracle Linux 6.2 as Guest OS

Folks,
Hello. I just start to install 4-nodes RAC system using VMplayer 3. The host Operating System is Windows 7.
The Guest OS is Oracle Linux 6.2.
Because my computer's hard disk does not have enough space, I install the Guest OS Oracle Linux 6.2 into a external hard disk. But its speed is very slow. It has taken more than 24 hours by now, but still don't finish installing Oracle Linux 6.2.
Do any folk understand what's going on ? Is there any problem on Oracle Linux 6.2 ?

user8860348 wrote:
Folks,
Hello. I just start to install 4-nodes RAC system using VMplayer 3. The host Operating System is Windows 7.
The Guest OS is Oracle Linux 6.2.
Because my computer's hard disk does not have enough space, I install the Guest OS Oracle Linux 6.2 into a external hard disk. But its speed is very slow. It has taken more than 24 hours by now, but still don't finish installing Oracle Linux 6.2.
Do any folk understand what's going on ? Is there any problem on Oracle Linux 6.2 ?of course the problem is with Oracle Linux 6.2 & not with your VM implementation

Installing RAC on Oracle Linux 6.3 using VMWare ESX

Hi
I have configured a pair of Linux servers following a guide on Oracle-base.
Both servers have their own OS disks and they have four virtual disks that are shared between the two vm's (configured as sharable in VMWare using a separate SCSI controller to the OS disks etc.
The /u01/app/11.2.0.3/grid/root.sh script is failing at what appears to be the part where the daemons are added to the inittab the error i get is :
CRS-4124: Oracle High Availability Services startup failed.
CRS-4000: Command Start failed, or completed with errors.
ohasd failed to start: Inappropriate ioctl for device
ohasd failed to start at /u01/app/11.2.0.3/grid/crs/install/rootcrs.pl line 443.
I have found a few notes of the Internet suggesting disabling IPv6 (It's already disabled)
Restarting syslog
and removing some file in varoius tmp dirs (there were none)
But i'm getting the feeling the issue is with the shared disk config.
Can anyone point me to log files etc so i can troubleshoot this further?

I guys I have run into same problem. Is there a solution for this or not.
OS: OEL 6.3 x86_64
ASM 2.0
Grid Infra: 11.2.0.1
root.sh script fails saying:
Adding daemon to inittab
CRS-4124: Oracle High Availability Services startup failed.
CRS-4000: Command Start failed, or completed with errors.
ohasd failed to start: Inappropriate ioctl for device
ohasd failed to start: Inappropriate ioctl for device at /u01/app/oracle/product/11.2.0/grid/crs/install/roothas.pl line 296.

Install TimesTen with oracle clusterware

Now I have installed Oracle set groupware, TimesTen,11g,
If the TimesTen cache Oracle, is it right?
In "Start the active standby pair" TimesTen cache and replication before opening
Main the following points do not understand:
Cluster.oracle.ini
AppName=reader
AppType=Active
AppStartCmd=/timesten/TimesTen/app_start.sh start
AppStopCmd=/timesten/TimesTen/app_stop.sh stop
AppCheckCmd=/timesten/TimesTen/app_check.sh
checkCacheConnect=Y
Where app_start.sh is the need to write your own?
Can you give me an example?

As far as I am aware, recent (11g onwards) releases of Oracle Heterogenous services do not work with TimesTen as they now require an OBC 3.x driver and the TimesTen driver is currently 2.0. Even if they did work, this would not be a useful solution. It might allow Apex to access TimesTen after a fashion (though that is far from certain) but the performance would be very poor due to all the network hops and software layers between the application and TimesTen.
If you put one or two tables in TimesTen then one problem from an Apex perspective is that it is now dealing with two databases; the TimesTen cache containing two tables and the oracle database containing all the other tables. Is Apex designed to cope with this? Does it have the concept of data located in multiple databases where one of them is not the Oracle database? Also, do you need transactions or queries (joins) that span the TimesTen tables and the tables in Oracle DB? If so then this also will not work as that is not possible today.
I have to say that as far as Apex goes I think this is likely a non-starter. However, if you do try it and have any success then please do post the results here as we'd be interested to hear about it.
Chris

Call_form problem oracle form 10g

Hi,
We create some forms. Next Using Call_form in menu bar we call another form, next we call another form.
Example:
Form A -> Form B -> Form C
It's working fine.
But, 'Form C' did not retrieve all data.
EXAMPLE:
'WHEN-NEW-FORM-INSTANCE' - TRIGGER
Query : "SELECT NO, NAME, MOBILE INTO :EMP.NO, :EMP.NAME, :EMP.MOBILE FROM EMP".
The above query did not work. Only Display First Record, First Column Data(:EMP.NO).
If i open the same 'Form C' in directly. It's working fine.
What is the problem? How can i solve this problem?

I try Your Solution, it's not working.
Code:
Declare
CURSOR PRE_CUR IS
SELECT PRE_CHAR_PRODUCT_MASTER,
PRE_NO_PRODUCT_MASTER,
PRE_CHAR_CUSTOMER_MASTER,
PRE_NO_CUSTOMER_MASTER
FROM PREFIX_MASTER;
ITEM1 NVARCHAR2(100);
ITEM2 NUMBER;
ITEM3 NVARCHAR2(100);
ITEM4 NUMBER;
BEGIN
OPEN PRE_CUR;
FETCH PRE_CUR INTO ITEM1, ITEM2, ITEM3, ITEM4;
:PREFIX_MASTER.PRE_CHAR_PRODUCT_MASTER := ITEM1;
:PREFIX_MASTER.PRE_NO_PRODUCT_MASTER := ITEM2;
:PREFIX_MASTER.PRE_CHAR_CUSTOMER_MASTER := ITEM3;
:PREFIX_MASTER.PRE_NO_CUSTOMER_MASTER := ITEM4;
CLOSE PRE_CUR;
END;
. I have another form. In this form Master/Detail . Detail have 6 Column.
When i click 'When-Button-Pressed' Trigger. I am using Cursor(Select Statement) and FOR Loop(Fetch data to fields).
The Detail block only display first 2 column data.
If i open same Form, directly(Using Form Builder) , it's working fine. Retrieve all record and displayed all column.
Why? How to solve this problem.

Installing RAC Problem: Oracle Clusterware 10g is present on remote node

Similar Messages

Maybe you are looking for