Installing Radeon 7500

I am going to install a Radeon 7500 PCI card is there any thing I need to do before I in stall it on this MS6378 board?

thank u for the support. I am also increasing my memory from 256 to 334 megs. :D

Similar Messages

Having trouble installing Radeon 7500 into K7T266 Pro

I am having all sorts of problems switching from my nVidia TNT 2 (MaxiGamer Cougar) video card to my new Radeon 7500. I am running an AMD Athlon 1400 with 512 MB DDR RAM.
I have the K7T266 Pro (MS-6380) chipset.
Can anyone think of what I am missing here. I think I have all the updates AGP drivers I need but I am not sure. I get lock ups prior to windows starting everytime. Even in safe mode.
Grrrr.

I ended having to format my c drive. Windows began doing some really funny things and then never started again with old or new video cards. I have re-installed windows but now sometimes my monitor stays blank when I start the computer. It is supposed to wake itself up but when it does, it has no picture. To solve this I shut down and flick the switch on the back and discharge everything. It then works again for another few times. Do you think this may be a problem with my power supply? I have an Enermax 350W. I bought it when I built the computer and figured it would have plenty of juice.
Thanks for you help

K7-Master 6341 &ATI Radeon 7500 4x/"1x2x" AGP Video Issue (XP Crashes

I know the K7-master is old.... but maybe someone will know how to help me keep my PC from crashing if I put the bios setting on 4x instead of 1x/2x. Thanks.
System: MSI K7-Master (MS6341)
BIOS V. 1.5 (Newest)
OS: WindowsXP(SP1)
CPU: AthlonXP 2000+ Model 6
AMD AGP Miniport V5.33 Installed
Radeon 7500 AGP 64Mb
Video Drivers V6.13.10.6166
Display Driver V7.76-020815b-005727c-ATI
Control Panel V6.13.10.3027
Catalyst V02.3
Clean XP install.... no software... only AGP Card in Machine... no PCI or other cards.
Card Bought New in Box
Issue: WindowsXP crashes on boot (apprx 4seconds into loading desktop)and recovers to largest resuloution 640x??? 4 colors if BIOS setting for "AGP Data Transfer Mode"="4x" If BIOS is set to "1x/2x" system boots and runs without error.
ErrorMessages: "Windows has revovered from a serious error" Possible cause "ATI Radeon 7500 display driver" Sent to Microsoft with no help back from Microsoft.
Current System Bios Settings and Values.
"Video BIOS Shadow" = "Disabled" (Possible Settings, Enabled-Disabled)
"System BIOS Cachable"="Disabled" (Enabled-Disabled)
"Video RAM Cacheable"="Disabled" (Enabled-Disabled)
"Memory Hole at 15M-16M"="Disabled" (Enabled,Disabled)
"AGP Aperture Size MB"="64" (32,64,128,256)
"AGP ISA Aliasing" = "Disabled" (Enabled,Disabled) I dont know what that is anyway.
"AGP Secondary Lat Timer" = "20h" (00h,20h,40h,60h,80h,C0h,FFh)Unknown what this is too.
"AGP Fast Write"= "Disabled" (Enabled,Disabled)
"AGP Data Transfer Mode" = ("4x" Crashes & "1x/2x" No system crash)
"Init Display First" = "AGP" (PCI Slot,AGP)
"PNP OS Installed" ="YES" (No,Yes)
"Resources Controlled By"= "AUTO ESCD"
"PCI/VGA Palette Snoop" = "Disabled" (Enable,Disable)
I know this is alot of information I just hope you can help me get my ATI Radeon 7500 transfering at 4x bus speed. I know the card is "older" than the super powerful ones but I want to get everyting out of this card I paid for. I thank you in advance for your help. Please let me know if you need any more information.
Thanks,
Dan

Quote
Originally posted by nutt2118
Here is part of the message from ATI about this problem that I need help with.
"Try lowering the AGP support (i.e. from AGP 4X to AGP 2X). If this resolves
the issue, you may consider contacting the motherboard/chipset vendor for more
information regarding the GART support available on the motherboard/chipset."
Does the MS-6341 K7-Master support "GART" and what is "GART"
Thanks,
Dan
I returned my Nvidia GeForce4 Ti4600 PNY Verto back to PNY last year, after I had it for a few months, and it kept crashing at AGP 4x. They sent me a new one, I tried it at 4x, with the latest Nvidia Detonator drivers, I have tried it under fresh installs of Windows 2000 SP3, and WindowsXP, both crashing when the card is set to 4x. I believe there is major bugs in this board and it does not truly support AGP 4x. I am goin to try and RMA my board back to MSI, demanding a board that can support my card, or a suitable replacement that will support my current CPU and memory. This is the first MB I ever bought from MSI, and depending on how they resolve this situation, it will probably be the last. This is the 10th machine I have built on my own, I have just not had to time to deal with this issue, and have dealt with it at AGP 2x, but it is slow as hell, especially with games like Battlefield 1942.

K7T266 Pro2 and ATI Radeon 7500?

Ok, first off, I have been in the technical field for about 12 years, so there is no need to "dumb down" your responses...
All right. I've got the above board, and it has been working fine up until I bought a new ATI Radeon 7500 vid card. I shut down the computer, disconnected the power supply, and removed my old vid card (which, btw, was working fine, but it was an 8MB old card). Then I installed the new vid card and restarted the computer. At this point, it promptly refused to even post. The monitor light flashed as if it were in standby, and there were no sounds from the board. Everything is still recieving power, so that's not the problem. The "D-bracket" showed 1-Red, 2-Green, 3 and 4-Red. Now this says that there is something wrong with the memory (?). Switched RAM chips, then the d-bracket shows all red = CPU problems? So, I shut it down and waited for a bit. Restarted it again, and the same lighting on the d-bracket, with 1,3,4-Red, and 2-Green. Now the motherboard repeatedly emits 3 fast beeps, then a pause, then 3 fast beeps, etc.. So, I put in the old video card, and the same thing occurred, in a RANDOM order. So, keeping in mind that NOTHING other than the vid card was removed OR touched before the problem occurred. RANDOM errors are NOT the way to run technical items. RANDOM problems are meant for EXPERIMENTAL items...
I would really hate to have to send in my motherboard to MSI to get it fixed (on warranty), because my business RELIES on my ability to access my computer, and 3 months computer-less is unacceptable. If there is not some LOGICAL thing that may be wrong, I will have to simply go out and buy another new motherboard. Unfortunate as it is, I am afraid that it will NOT be an MSI, because all I have ever had is problems with this board, and the lack of technical support is a real problem.
Any ideas will be tried, and I will post results as soon as I see the suggestion. Thanks.

well if you can and I know I would take the ATI card back and get a refund and by a nvidia I got a $250 ATI AIW setting on my file cabnet as a paper wait
one other thing you could try if you have one a old PCI video card remove the ATi card put a PCi video card in and try to boot useing it if that works go into bios setup and under advanced chipset settings make sure all the agp settings are set to auto I know I had this problem before I had the AGP driver setting set manule to a setting that would not work with my video card and clearing cmos would not reset this setting to auto.
I had to use a old pci card to boot so I could reset this to auto.

Radeon 7500 Normal AGP card Without ADC (Used before on Windows Vista PC)

Dear ...
i read in some articals on internet that you can use this kind of Cards "Radeon 7500 Normal AGP card Without ADC (Used before on Windows Vista PC)" with Mac G4 Quicksliver 733Mhz ... just u have to install it and leave Machine on for sometimes till dedicated it is thatture ?
Message was edited by: waldhin

A Radeon 7500 (as well as any other AGP graphics card) that was removed from a PC must have its EEPROM chip re-programmed to function in an Apple computer. This is usually done while the card is installed in a PC, using a compatible flash utility program and the correct ROM code taken from the Mac version of the same card.

Radeon 7500 vs onboard Geforce2MX

I'm considering getting a ATI All-In-Wonder Radeon 7500 for my nForce1. Does anyone know whether this card is faster or slower than the onboard Geforce2MX? I really hate to take a hit in performance playing Counter Strike or Medal of Honor.
I found some performance scores on extremetech.com and tomshardware.com, but they were comparing to the AIW Radeon 8500 and the Geforce Personal Cinema which had a worse score than the AIW7500. AIW8500 is a bit pricey for my budget and the $400 AIW9700Pro is way out of my league.
BTW, would BIOS auto disable onboard Geforce2MX and free up 32Meg RAM when AGP board is installed?

Hello!
I had a radeon 7500 64mb ddr in my nforce.
Counter strike runs a bit better using the onboard gfx gf2.
With the radeon 7500 player and gun model details is a bit blurred, this is due to cs not the card. And fps drops slightly more buts it isnt that bad. CS has always been with ATi.
For games like sof2 the, using high detail 1024x768 in 32bit colour the radeon 7500 really is quite good, a million times better than the onbaord.
Its far better than the onboard video. I would use it.
But i sold it to my bro for £15 eheh!
Yes the onboard gfx will automatically disable its self and free the 32 mb its uses.
Also set you agp aperature size to 64MB, anything lower on the radeon 7500 and it will run slow.
I benchmarked my 7500 on default settings on the nforce around about 5200.
Tango

845e max and radeon 7500

ok my problem is that i just bought this video card(ati radeon 7500) and on my mobo it says only use agp 4x 1.5v only but this card is a 4x/2x. it also says in my mobo manuel to use a 2x/4x card switch to 4x in the jumpers. my problem is that there is no jumpers on the card so what do i do. i dont want to distroy my mobo so what do i do.

I am pretty sure that ATI Radeon 7500 is a 1.5V 4X-compliant card. Just put it in and try it out. The motherboard has this routing thing that won't boot the computer if you have a 3.3V AGP card installed anyway, so you are safe. 8)

Radeon 7500 Mac Edition Quicksilver 2001

I have installed a Radeon 7500 Mac Edition video card in my 2001 Quicksilver. This card was an option in the 2002 Quicksilver. I am having problems installing OSX software and notice that Mac warns that it may be necessary to install the original graphics card for installation. I no longer have my original card.
Is the 7500 compatible with my machine? In general the card works fine with my dual moniotrs but I do have problems running iChat with frequent freezes and dropped service.
If the 7500 is not a good choice for my machine what should I buy for dual monitor support and Mac compatibility?

Hi,
The 7500 Mac Edition is kind of an oddball. Good card, but ATI doesn't support it with Mac Drivers. You can download the latest Radeon Universal Driver ROM's from here;
https://support.ati.com/ics/support/default.asp?deptID=894&task=knowledge&folder ID=27
Run the program and see if it helps.
If not, depending on budget, I'd get an ATI 9800 Pro Mac Edition, either the 128MB or 256MB. You will then have the best video card available for a G4, the QS will handle it just fine. I just noticed that Newegg.com has the 256MB available for $199 after rebate, a deal -for the best.
Regards,
Dave

How to get the Windows Vista Driver for ATI Radeon 7500 card?

How to get the Windows Vista Driver for ATI Radeon 7500 card?
I am using a IBM Thinkpad T42 with a 32Mb ATI Radeon 7500 graphic card AGP.
Is there any Vista 32-bit driver to update my card so that this system support Aero effect?
Thank you.
regards,
W. Thong

wthong wrote:
How to get the Windows Vista Driver for ATI Radeon 7500 card?
The Radeon 9000 driver works for the Radeon 7500 card. I have successfully used it on a T43 with Vista Ultimate x86
wthong wrote:
Is there any Vista 32-bit driver to update my card so that this system support Aero effect?
Unfortunately no. The Radeon 9000 driver should bring your graphics score up to close to 2, but it will not get it high enough to enable Aero support.
Cheers,
Bill
I don't work for Lenovo

15" Studio Flat ADC Display PowerMac G4 400 MHz Radeon 7500 no video

Purchased a video card - Radeon 7500
ATI Radeon 7500 32MB ADC VGA MAC Edition video card
Computer is PowerMac G4 AGP Graphics (CPU type 2.7) 1 MB Level 2 cache
VGA works fine.
ADC is not operational. 15 inch (clear case) display not getting a signal, Profiler not showing any display connected to the ATY,Bluestone_B
SYSTEM REQUIREMENTS (VIDEO CARD)
Power Mac™ G4 with AGP 2X or AGP 2X/4X universal slot
DVD playback requires DVD drive
!!!!!!!!! WHATS WRONG?
PowerMac G4 400 MHz Mac OS X (10.3.9)

Hi Gary,
The G4 AGP graphics model is pre-ADC and its motherboard will not support a video card with a native ADC port. The ADC ports on such cards draw their power and USB feed via an extra leg on the card that fits into an extra slot at one end of the AGP slot on the computer motherboard. Your computer does not have this extra slot.
To run an ADC display off your computer, you can run a video card with a DVI output, then use a DVI to ADC adaptor such as this one:
http://www.drbott.com/prod/db.lasso?code=0111-DVAD
You can use VGA to ADC adaptors, but they are much more expensive (than a DVI to ADC adaptor plus another video card), and don't give as good a result.
Cheers!
Karl

Radeon 7500 AGP identification problem

I think I may have asked before, but I don't remember. My system specs are listed below. My problem is that my Radeon 7500 AGP card shows up as PCI under properties in the hardware listing. Why is this? Is it a problem?
Thanks

Quote
Originally posted by Rob454
How many IRQs does your device manager go up to?
More than 16?
You might have to enable APIC to get more irqs for your devices. But could cause trouble.
Also here is the newest Catylist drivers from Ati
They are newer than on the Power color site.
http://mirror.ati.com/support/drivers/powered.html
I momentarily lost track of this thread. :D
Yes, more than 16. I'm pretty sure there are 22. I don't have any sharing now except for the USB, they all share the same IRQ. I don't have any device conflicts, so that's good.
Thanks for the link.

Mobility Radeon 7500 OpenGL issues

Whenever I attempt to use anything involving openGL, my CPU usage hits 100%. Complex openGL programs will drop to a framerate of less than 10, and sometimes crash Xorg. How can I fix this?
General system info:
lspci
00:00.0 Host bridge: Intel Corporation 82845 845 [Brookdale] Chipset Host Bridge (rev 04)
00:01.0 PCI bridge: Intel Corporation 82845 845 [Brookdale] Chipset AGP Bridge (rev 04)
00:1d.0 USB Controller: Intel Corporation 82801CA/CAM USB Controller #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation 82801CA/CAM USB Controller #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation 82801CA/CAM USB Controller #3 (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 42)
00:1f.0 ISA bridge: Intel Corporation 82801CAM ISA Bridge (LPC) (rev 02)
00:1f.1 IDE interface: Intel Corporation 82801CAM IDE U100 Controller (rev 02)
00:1f.3 SMBus: Intel Corporation 82801CA/CAM SMBus Controller (rev 02)
00:1f.5 Multimedia audio controller: Intel Corporation 82801CA/CAM AC'97 Audio Controller (rev 02)
00:1f.6 Modem: Intel Corporation 82801CA/CAM AC'97 Modem Controller (rev 02)
01:00.0 VGA compatible controller: ATI Technologies Inc Radeon Mobility M7 LW [Radeon Mobility 7500]
02:00.0 CardBus bridge: Texas Instruments PCI1520 PC card Cardbus Controller (rev 01)
02:00.1 CardBus bridge: Texas Instruments PCI1520 PC card Cardbus Controller (rev 01)
02:02.0 Network controller: Broadcom Corporation BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller (rev 02)
02:08.0 Ethernet controller: Intel Corporation 82801CAM (ICH3) PRO/100 VE (LOM) Ethernet Controller (rev 42)
lsmod
Module Size Used by
ipv6 279604 16
oss_usb 106284 2
oss_ich 18832 4
osscore 552820 4 oss_usb,oss_ich
ext2 68964 1
fan 4448 0
fuse 64856 2
arc4 1756 2
ecb 2812 2
b43 137208 0
radeon 666112 2
ttm 37164 1 radeon
joydev 10528 0
drm 156160 4 radeon,ttm
i2c_algo_bit 5888 1 radeon
e100 34308 0
ssb 45988 1 b43
ppdev 7008 0
yenta_socket 25384 2
rsrc_nonstatic 12316 1 yenta_socket
mii 4892 1 e100
thinkpad_acpi 67988 0
battery 10816 0
nvram 6984 1 thinkpad_acpi
video 20116 0
output 2908 1 video
pcmcia 36168 2 b43,ssb
parport_pc 37060 1
irtty_sir 5564 0
sir_dev 11712 1 irtty_sir
psmouse 60084 0
ac 4224 0
processor 36076 1
iTCO_wdt 11072 0
iTCO_vendor_support 3136 1 iTCO_wdt
mac80211 155788 1 b43
irda 126744 1 sir_dev
crc_ccitt 1724 1 irda
thermal 13912 0
uhci_hcd 23692 0
button 5612 0
ehci_hcd 36620 0
serio_raw 5792 0
shpchp 34384 0
intel_agp 28604 1
lp 9732 0
parport 34412 3 ppdev,parport_pc,lp
evdev 10240 15
cfg80211 90364 2 b43,mac80211
pci_hotplug 28732 1 shpchp
pcspkr 2492 0
i2c_i801 9616 0
i2c_core 21808 4 radeon,drm,i2c_algo_bit,i2c_i801
rfkill 19696 2 thinkpad_acpi,cfg80211
sg 27728 0
agpgart 32660 3 ttm,drm,intel_agp
led_class 4000 2 b43,thinkpad_acpi
usbcore 154032 5 oss_usb,uhci_hcd,ehci_hcd
pcmcia_core 35920 5 b43,ssb,yenta_socket,rsrc_nonstatic,pcmcia
rtc_cmos 11344 0
rtc_core 17976 1 rtc_cmos
rtc_lib 2524 1 rtc_core
ext4 334112 2
mbcache 7104 2 ext2,ext4
jbd2 82016 1 ext4
crc16 1660 1 ext4
sr_mod 16644 0
cdrom 36032 1 sr_mod
sd_mod 28344 5
pata_acpi 4252 0
ata_piix 23268 4
ata_generic 4704 0
libata 169548 3 pata_acpi,ata_piix,ata_generic
floppy 56356 0
scsi_mod 112468 4 sg,sr_mod,sd_mod,libata
dmesg
Linux version 2.6.31-ARCH (root@architect) (gcc version 4.4.2 (GCC) ) #1 SMP PREEMPT Tue Nov 10 19:48:17 CET 2009
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
NSC Geode by NSC
Cyrix CyrixInstead
Centaur CentaurHauls
Transmeta GenuineTMx86
Transmeta TransmetaCPU
UMC UMC UMC UMC
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003ff70000 (usable)
BIOS-e820: 000000003ff70000 - 000000003ff7e000 (ACPI data)
BIOS-e820: 000000003ff7e000 - 000000003ff80000 (ACPI NVS)
BIOS-e820: 000000003ff80000 - 0000000040000000 (reserved)
BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved)
DMI present.
last_pfn = 0x3ff70 max_arch_pfn = 0x100000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-DBFFF uncachable
DC000-DFFFF write-back
E0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask FC0000000 write-back
1 base 03FF80000 mask FFFF80000 uncachable
2 disabled
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved)
Scanning 1 areas for low memory corruption
modified physical RAM map:
modified: 0000000000000000 - 0000000000002000 (usable)
modified: 0000000000002000 - 0000000000006000 (reserved)
modified: 0000000000006000 - 000000000009f000 (usable)
modified: 000000000009f000 - 00000000000a0000 (reserved)
modified: 00000000000dc000 - 0000000000100000 (reserved)
modified: 0000000000100000 - 000000003ff70000 (usable)
modified: 000000003ff70000 - 000000003ff7e000 (ACPI data)
modified: 000000003ff7e000 - 000000003ff80000 (ACPI NVS)
modified: 000000003ff80000 - 0000000040000000 (reserved)
modified: 00000000ff800000 - 0000000100000000 (reserved)
initial memory mapped : 0 - 01800000
init_memory_mapping: 0000000000000000-00000000377fe000
0000000000 - 0000400000 page 4k
0000400000 - 0037400000 page 2M
0037400000 - 00377fe000 page 4k
kernel direct mapping tables up to 377fe000 @ 7000-c000
RAMDISK: 3fea7000 - 3ff5fb2e
Allocated new RAMDISK: 00100000 - 001b8b2e
Move RAMDISK from 000000003fea7000 - 000000003ff5fb2d to 00100000 - 001b8b2d
ACPI: RSDP 000f7010 00024 (v02 IBM )
ACPI: XSDT 3ff731cd 0004C (v01 IBM TP-1I 00002080 LTP 00000000)
ACPI: FACP 3ff73300 00081 (v01 IBM TP-1I 00002080 IBM 00000001)
ACPI: DSDT 3ff733e7 0AAD5 (v01 IBM TP-1I 00002080 MSFT 0100000D)
ACPI: FACS 3ff7f000 00040
ACPI: SSDT 3ff733b4 00033 (v01 IBM TP-1I 00002080 MSFT 0100000D)
ACPI: ECDT 3ff7debc 00052 (v01 IBM TP-1I 00002080 IBM 00000001)
ACPI: TCPA 3ff7df0e 00032 (v01 IBM TP-1I 00002080 PTL 00000001)
ACPI: BOOT 3ff7dfd8 00028 (v01 IBM TP-1I 00002080 LTP 00000001)
135MB HIGHMEM available.
887MB LOWMEM available.
mapped low ram: 0 - 377fe000
low ram: 0 - 377fe000
node 0 low ram: 00000000 - 377fe000
node 0 bootmap 00008000 - 0000ef00
(9 early reservations) ==> bootmem [0000000000 - 00377fe000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
#2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
#3 [0001000000 - 000156da44] TEXT DATA BSS ==> [0001000000 - 000156da44]
#4 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000]
#5 [000156e000 - 0001574128] BRK ==> [000156e000 - 0001574128]
#6 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000]
#7 [0000100000 - 00001b8b2e] NEW RAMDISK ==> [0000100000 - 00001b8b2e]
#8 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000]
Zone PFN ranges:
DMA 0x00000000 -> 0x00001000
Normal 0x00001000 -> 0x000377fe
HighMem 0x000377fe -> 0x0003ff70
Movable zone start PFN for each node
early_node_map[3] active PFN ranges
0: 0x00000000 -> 0x00000002
0: 0x00000006 -> 0x0000009f
0: 0x00000100 -> 0x0003ff70
On node 0 totalpages: 261899
free_area_init_node: node 0, pgdat c141b740, node_mem_map c1575000
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3963 pages, LIFO batch:0
Normal zone: 1744 pages used for memmap
Normal zone: 221486 pages, LIFO batch:31
HighMem zone: 271 pages used for memmap
HighMem zone: 34403 pages, LIFO batch:7
Using APIC driver default
ACPI: PM-Timer IO Port: 0x1008
SMP: Allowing 1 CPUs, 0 hotplug CPUs
Local APIC disabled by BIOS -- you can enable it with "lapic"
APIC: disable apic facility
nr_irqs_gsi: 16
PM: Registered nosave memory: 0000000000002000 - 0000000000006000
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000
PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
Allocating PCI resources starting at 40000000 (gap: 40000000:bf800000)
NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1
PERCPU: Embedded 14 pages at c1d7a000, static data 34332 bytes
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259852
Kernel command line: root=/dev/disk/by-uuid/ce79e597-2b00-4812-95b4-eda62758ab6c ro vga=792 nomodeset
PID hash table entries: 4096 (order: 12, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
Initializing HighMem for node 0 (000377fe:0003ff70)
Memory: 1031828k/1048000k available (3111k kernel code, 15416k reserved, 1120k data, 416k init, 138696k highmem)
virtual kernel memory layout:
fixmap : 0xfff1e000 - 0xfffff000 ( 900 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
.init : 0xc1422000 - 0xc148a000 ( 416 kB)
.data : 0xc1309ddd - 0xc1421ea8 (1120 kB)
.text : 0xc1000000 - 0xc1309ddd (3111 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=13, HWalign=128, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
NR_IRQS:512
Fast TSC calibration using PIT
Detected 2192.708 MHz processor.
Console: colour dummy device 80x25
console [tty0] enabled
Calibrating delay loop (skipped), value calculated using timer frequency.. 4387.14 BogoMIPS (lpj=7309026)
Security Framework initialized
Mount-cache hash table entries: 512
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: Hyper-Threading is disabled
mce: CPU supports 4 MCE banks
------------[ cut here ]------------
WARNING: at arch/x86/kernel/apic/apic.c:247 native_apic_write_dummy+0x4b/0x60()
Hardware name: 236686U
Modules linked in:
Pid: 0, comm: swapper Not tainted 2.6.31-ARCH #1
Call Trace:
[<c10464da>] ? warn_slowpath_common+0x7a/0xc0
[<c101f2ab>] ? native_apic_write_dummy+0x4b/0x60
[<c1046540>] ? warn_slowpath_null+0x20/0x40
[<c101f2ab>] ? native_apic_write_dummy+0x4b/0x60
[<c1016601>] ? intel_init_thermal+0xd1/0x1d0
[<c10149c3>] ? mce_init+0xc3/0xf0
[<c10ed693>] ? __kmalloc+0x93/0x210
[<c1015bc5>] ? mce_intel_feature_init+0x15/0x70
[<c13014ed>] ? mcheck_init+0x261/0x2b5
[<c12ff55a>] ? identify_cpu+0x377/0x386
[<c10ecabf>] ? kmem_cache_alloc+0x6f/0x170
[<c1429dc9>] ? identify_boot_cpu+0xa/0x1e
[<c1429f90>] ? check_bugs+0x14/0x108
[<c109add0>] ? __delayacct_tsk_init+0x20/0x50
[<c1422a31>] ? start_kernel+0x332/0x353
[<c14224f0>] ? unknown_bootoption+0x0/0x1bd
---[ end trace a7919e7f17c0a725 ]---
CPU0: Thermal monitoring enabled (TM1)
Performance Counters: no PMU driver, software counters only.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 11k freed
ACPI: Core revision 20090521
ACPI: setting ELCR to 0200 (from 0800)
weird, boot CPU (#0) not listed by the BIOS.
SMP motherboard not detected.
Local APIC not detected. Using dummy APIC emulation.
SMP disabled
Brought up 1 CPUs
Total of 1 processors activated (4387.14 BogoMIPS).
CPU0 attaching NULL sched-domain.
Booting paravirtualized kernel on bare hardware
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfd8fe, last bus=8
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: EC description table is found, configuring boot EC
ACPI: EC: non-query interrupt received, switching to interrupt mode
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using PIC for interrupt routing
ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
ACPI: EC: driver started in interrupt mode
ACPI: Power Resource [PUBS] (on)
ACPI: ACPI Dock Station Driver: 3 docks/bays found
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:00.0: reg 10 32bit mmio: [0xe0000000-0xe3ffffff]
pci 0000:00:1d.0: reg 20 io port: [0x1800-0x181f]
pci 0000:00:1d.1: reg 20 io port: [0x1820-0x183f]
pci 0000:00:1d.2: reg 20 io port: [0x1840-0x185f]
pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH4 GPIO
pci 0000:00:1f.1: reg 10 io port: [0x1f0-0x1f7]
pci 0000:00:1f.1: reg 14 io port: [0x3f4-0x3f7]
pci 0000:00:1f.1: reg 18 io port: [0x170-0x177]
pci 0000:00:1f.1: reg 1c io port: [0x374-0x377]
pci 0000:00:1f.1: reg 20 io port: [0x1860-0x186f]
pci 0000:00:1f.1: reg 24 32bit mmio: [0x000000-0x0003ff]
pci 0000:00:1f.3: reg 20 io port: [0x1880-0x189f]
pci 0000:00:1f.5: reg 10 io port: [0x1c00-0x1cff]
pci 0000:00:1f.5: reg 14 io port: [0x18c0-0x18ff]
pci 0000:00:1f.6: reg 10 io port: [0x2400-0x24ff]
pci 0000:00:1f.6: reg 14 io port: [0x2000-0x207f]
pci 0000:01:00.0: reg 10 32bit mmio: [0xe8000000-0xefffffff]
pci 0000:01:00.0: reg 14 io port: [0x3000-0x30ff]
pci 0000:01:00.0: reg 18 32bit mmio: [0xd0100000-0xd010ffff]
pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x01ffff]
pci 0000:01:00.0: supports D1 D2
pci 0000:00:01.0: bridge io port: [0x3000-0x3fff]
pci 0000:00:01.0: bridge 32bit mmio: [0xd0100000-0xd01fffff]
pci 0000:00:01.0: bridge 32bit mmio pref: [0xe8000000-0xefffffff]
pci 0000:02:00.0: reg 10 32bit mmio: [0x50000000-0x50000fff]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:00.0: PME# disabled
pci 0000:02:00.1: reg 10 32bit mmio: [0x51000000-0x51000fff]
pci 0000:02:00.1: supports D1 D2
pci 0000:02:00.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:00.1: PME# disabled
pci 0000:02:02.0: reg 10 32bit mmio: [0xd0200000-0xd0201fff]
pci 0000:02:08.0: reg 10 32bit mmio: [0xd0202000-0xd0202fff]
pci 0000:02:08.0: reg 14 io port: [0x8000-0x803f]
pci 0000:02:08.0: supports D1 D2
pci 0000:02:08.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:08.0: PME# disabled
pci 0000:00:1e.0: transparent bridge
pci 0000:00:1e.0: bridge io port: [0x4000-0x8fff]
pci 0000:00:1e.0: bridge 32bit mmio: [0xd0200000-0xdfffffff]
pci 0000:00:1e.0: bridge 32bit mmio pref: [0xf0000000-0xf7ffffff]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
PCI: Using ACPI for IRQ routing
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 13 devices
ACPI: ACPI bus type pnp unregistered
system 00:00: iomem range 0x0-0x9ffff could not be reserved
system 00:00: iomem range 0xc0000-0xc3fff could not be reserved
system 00:00: iomem range 0xc4000-0xc7fff could not be reserved
system 00:00: iomem range 0xc8000-0xcbfff could not be reserved
system 00:00: iomem range 0xcc000-0xcffff could not be reserved
system 00:00: iomem range 0xdc000-0xdffff could not be reserved
system 00:00: iomem range 0xe0000-0xe3fff could not be reserved
system 00:00: iomem range 0xe4000-0xe7fff could not be reserved
system 00:00: iomem range 0xe8000-0xebfff could not be reserved
system 00:00: iomem range 0xec000-0xeffff could not be reserved
system 00:00: iomem range 0xf0000-0xfffff could not be reserved
system 00:00: iomem range 0x100000-0x3fffffff could not be reserved
system 00:00: iomem range 0xfec00000-0xffffffff could not be reserved
system 00:02: ioport range 0x1000-0x107f has been reserved
system 00:02: ioport range 0x1180-0x11bf has been reserved
system 00:02: ioport range 0x15e0-0x15ef has been reserved
system 00:02: ioport range 0x1600-0x167f has been reserved
pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
pci 0000:00:01.0: IO window: 0x3000-0x3fff
pci 0000:00:01.0: MEM window: 0xd0100000-0xd01fffff
pci 0000:00:01.0: PREFETCH window: 0xe8000000-0xefffffff
pci 0000:02:00.0: CardBus bridge, secondary bus 0000:03
pci 0000:02:00.0: IO window: 0x004000-0x0040ff
pci 0000:02:00.0: IO window: 0x004400-0x0044ff
pci 0000:02:00.0: PREFETCH window: 0xf0000000-0xf3ffffff
pci 0000:02:00.0: MEM window: 0xd4000000-0xd7ffffff
pci 0000:02:00.1: CardBus bridge, secondary bus 0000:07
pci 0000:02:00.1: IO window: 0x004800-0x0048ff
pci 0000:02:00.1: IO window: 0x004c00-0x004cff
pci 0000:02:00.1: PREFETCH window: 0xf4000000-0xf7ffffff
pci 0000:02:00.1: MEM window: 0xd8000000-0xdbffffff
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02
pci 0000:00:1e.0: IO window: 0x4000-0x8fff
pci 0000:00:1e.0: MEM window: 0xd0200000-0xdfffffff
pci 0000:00:1e.0: PREFETCH window: 0xf0000000-0xf7ffffff
pci 0000:00:1e.0: setting latency timer to 64
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
pci 0000:02:00.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
pci 0000:02:00.1: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
pci_bus 0000:00: resource 0 io: [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
pci_bus 0000:01: resource 0 io: [0x3000-0x3fff]
pci_bus 0000:01: resource 1 mem: [0xd0100000-0xd01fffff]
pci_bus 0000:01: resource 2 pref mem [0xe8000000-0xefffffff]
pci_bus 0000:02: resource 0 io: [0x4000-0x8fff]
pci_bus 0000:02: resource 1 mem: [0xd0200000-0xdfffffff]
pci_bus 0000:02: resource 2 pref mem [0xf0000000-0xf7ffffff]
pci_bus 0000:02: resource 3 io: [0x00-0xffff]
pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffff]
pci_bus 0000:03: resource 0 io: [0x4000-0x40ff]
pci_bus 0000:03: resource 1 io: [0x4400-0x44ff]
pci_bus 0000:03: resource 2 pref mem [0xf0000000-0xf3ffffff]
pci_bus 0000:03: resource 3 mem: [0xd4000000-0xd7ffffff]
pci_bus 0000:07: resource 0 io: [0x4800-0x48ff]
pci_bus 0000:07: resource 1 io: [0x4c00-0x4cff]
pci_bus 0000:07: resource 2 pref mem [0xf4000000-0xf7ffffff]
pci_bus 0000:07: resource 3 mem: [0xd8000000-0xdbffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
NET: Registered protocol family 1
Unpacking initramfs...
Freeing initrd memory: 738k freed
Simple Boot Flag at 0x35 set to 0x1
IBM machine detected. Enabling interrupts during APM calls.
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: overridden by ACPI.
Scanning for low memory corruption every 60 seconds
audit: initializing netlink socket (disabled)
type=2000 audit(1259350175.183:1): initialized
highmem bounce pool size: 64 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 1746
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:01:00.0: Boot video device
pci 0000:02:08.0: Firmware left e100 interrupts enabled; disabling
vesafb: framebuffer at 0xe8000000, mapped to 0xf8080000, using 4608k, total 16320k
vesafb: mode is 1024x768x24, linelength=3072, pages=6
vesafb: protected mode interface info at c000:5701
vesafb: pmi: set display start = c00c5795, set palette = c00c57e1
vesafb: pmi: ports = 3010 3016 3054 3038 303c 305c 3000 3004 30b0 30b2 30b4
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a NS16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a NS16550A
00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a NS16550A
serial 0000:00:1f.6: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
serial 0000:00:1f.6: PCI INT B disabled
input: Macintosh mouse button emulation as /devices/virtual/input/input0
PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 17
Using IPI No-Shortcut mode
Switched to high resolution mode on CPU 0
registered taskstats version 1
Initalizing network drop monitor service
Freeing unused kernel memory: 416k freed
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
Floppy drive(s): fd0 is 1.44M
SCSI subsystem initialized
FDC 0 is a National Semiconductor PC87306
libata version 3.00 loaded.
ata_piix 0000:00:1f.1: version 2.13
ata_piix 0000:00:1f.1: enabling device (0005 -> 0007)
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
ata_piix 0000:00:1f.1: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
ata_piix 0000:00:1f.1: setting latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1860 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1868 irq 15
ata1.00: ATA-7: SAMSUNG MP0201H, YP200-06, max UDMA/100
ata2.00: ATAPI: HL-DT-STCD-RW/DVD DRIVE GCC-4240N, 0211, max UDMA/33
ata1.00: 39179952 sectors, multi 16: LBA48
ata1.00: configured for UDMA/100
ata2.00: configured for UDMA/33
scsi 0:0:0:0: Direct-Access ATA SAMSUNG MP0201H YP20 PQ: 0 ANSI: 5
scsi 1:0:0:0: CD-ROM HL-DT-ST RW/DVD GCC-4240N 0211 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 39179952 512-byte logical blocks: (20.0 GB/18.6 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3 sda4
sd 0:0:0:0: [sda] Attached SCSI disk
sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
EXT4-fs (sda3): INFO: recovery required on readonly filesystem
EXT4-fs (sda3): write access will be enabled during recovery
EXT4-fs (sda3): barriers enabled
kjournald2 starting: pid 500, dev sda3:8, commit interval 5 seconds
EXT4-fs (sda3): delayed allocation enabled
EXT4-fs: file extents enabled
EXT4-fs: mballoc enabled
EXT4-fs (sda3): orphan cleanup on readonly fs
EXT4-fs (sda3): ext4_orphan_cleanup: deleting unreferenced inode 212034
EXT4-fs (sda3): 1 orphan inode deleted
EXT4-fs (sda3): recovery complete
EXT4-fs (sda3): mounted filesystem with ordered data mode
rtc_cmos 00:06: RTC can wake from S4
rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram
udev: starting version 146
intel_rng: FWH not detected
Linux agpgart interface v0.103
sd 0:0:0:0: Attached scsi generic sg0 type 0
sr 1:0:0:0: Attached scsi generic sg1 type 5
i801_smbus 0000:00:1f.3: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
input: PC Speaker as /devices/platform/pcspkr/input/input2
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
agpgart-intel 0000:00:00.0: Intel 845G Chipset
agpgart-intel 0000:00:00.0: AGP aperture is 64M @ 0xe0000000
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
cfg80211: Using static regulatory domain info
cfg80211: Regulatory domain: US
(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
(2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
(5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
(5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
(5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
(5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
(5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
cfg80211: Calling CRDA for country: US
lp: driver loaded but no devices found
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
ACPI: Power Button [PWRF]
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input4
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
uhci_hcd 0000:00:1d.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1d.0: irq 11, io base 0x00001800
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
uhci_hcd 0000:00:1d.1: PCI INT B -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.1: irq 11, io base 0x00001820
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.2: irq 11, io base 0x00001840
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [THM0] (58 C)
ACPI: Lid Switch [LID]
input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input5
ACPI: Sleep Button [SLPB]
NET: Registered protocol family 23
usb 2-2: new full speed USB device using uhci_hcd and address 2
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
iTCO_wdt: Found a ICH3-M TCO device (Version=1, TCOBASE=0x1060)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
Marking TSC unstable due to TSC halts in idle
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
processor LNXCPU:00: registered as cooling_device0
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI: AC Adapter [AC] (on-line)
parport_pc 00:0b: reported by Plug and Play ACPI
parport0: PC-style at 0x3bc, irq 7 [PCSPP,TRISTATE]
usb 2-2: configuration #1 chosen from 4 choices
lp0: using parport0 (interrupt-driven).
nsc-ircc, chip->init
nsc-ircc, Found chip at base=0x02e
nsc-ircc, driver loaded (Dag Brattli)
nsc_ircc_open(), can't get iobase of 0x2f8
nsc-ircc, Found chip at base=0x02e
nsc-ircc, driver loaded (Dag Brattli)
nsc_ircc_open(), can't get iobase of 0x2f8
nsc-ircc 00:0c: disabled
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:03/device:04/input/input6
ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
Non-volatile memory driver v1.3
thinkpad_acpi: ThinkPad ACPI Extras v0.23
thinkpad_acpi: http://ibm-acpi.sf.net/
thinkpad_acpi: ThinkPad BIOS 1IET69WW (2.08 ), EC 1IHT20WW-1.07
ACPI: Battery Slot [BAT0] (battery present)
Registered led device: tpacpi::thinklight
Registered led device: tpacpi::power
Registered led device: tpacpi::standby
input: ThinkPad Extra Buttons as /devices/virtual/input/input7
ppdev: user-space parallel port driver
yenta_cardbus 0000:02:00.0: CardBus bridge found [1014:0512]
yenta_cardbus 0000:02:00.0: Using INTVAL to route CSC interrupts to PCI
yenta_cardbus 0000:02:00.0: Routing CardBus interrupts to PCI
yenta_cardbus 0000:02:00.0: TI: mfunc 0x01d21022, devctl 0x64
e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
e100: Copyright(c) 1999-2006 Intel Corporation
Synaptics Touchpad, model: 1, fw: 5.9, id: 0x2c6ab1, caps: 0x884793/0x0
serio: Synaptics pass-through port at isa0060/serio1/input0
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input8
yenta_cardbus 0000:02:00.0: ISA IRQ mask 0x0438, PCI irq 11
yenta_cardbus 0000:02:00.0: Socket status: 30000006
yenta_cardbus 0000:02:00.0: pcmcia: parent PCI bridge I/O window: 0x4000 - 0x8fff
pcmcia_socket pcmcia_socket0: cs: IO port probe 0x4000-0x8fff: clean.
yenta_cardbus 0000:02:00.0: pcmcia: parent PCI bridge Memory window: 0xd0200000 - 0xdfffffff
yenta_cardbus 0000:02:00.0: pcmcia: parent PCI bridge Memory window: 0xf0000000 - 0xf7ffffff
[drm] Initialized drm 1.1.0 20060810
[drm] VGACON disable radeon kernel modesetting.
pci 0000:01:00.0: power state changed by ACPI to D0
pci 0000:01:00.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
[drm] Initialized radeon 1.31.0 20080528 for 0000:01:00.0 on minor 0
ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 11
e100 0000:02:08.0: PCI INT A -> Link[LNKE] -> GSI 11 (level, low) -> IRQ 11
e100 0000:02:08.0: PME# disabled
e100: eth0: e100_probe: addr 0xd0202000, irq 11, MAC addr 00:0d:60:37:df:cb
b43-pci-bridge 0000:02:02.0: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
ssb: Sonics Silicon Backplane found on PCI device 0000:02:02.0
yenta_cardbus 0000:02:00.1: CardBus bridge found [1014:0512]
yenta_cardbus 0000:02:00.1: Using INTVAL to route CSC interrupts to PCI
yenta_cardbus 0000:02:00.1: Routing CardBus interrupts to PCI
yenta_cardbus 0000:02:00.1: TI: mfunc 0x01d21022, devctl 0x64
b43-phy0: Broadcom 4318 WLAN found (core revision 9)
phy0: Selected rate control algorithm 'minstrel'
Broadcom 43xx driver loaded [ Features: PML, Firmware-ID: FW13 ]
yenta_cardbus 0000:02:00.1: ISA IRQ mask 0x0438, PCI irq 11
yenta_cardbus 0000:02:00.1: Socket status: 30000006
yenta_cardbus 0000:02:00.1: pcmcia: parent PCI bridge I/O window: 0x4000 - 0x8fff
pcmcia_socket pcmcia_socket1: cs: IO port probe 0x4000-0x8fff: clean.
yenta_cardbus 0000:02:00.1: pcmcia: parent PCI bridge Memory window: 0xd0200000 - 0xdfffffff
yenta_cardbus 0000:02:00.1: pcmcia: parent PCI bridge Memory window: 0xf0000000 - 0xf7ffffff
fuse init (API version 7.12)
pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean.
pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
pcmcia_socket pcmcia_socket1: cs: IO port probe 0x100-0x3af: clean.
pcmcia_socket pcmcia_socket1: cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
pcmcia_socket pcmcia_socket1: cs: IO port probe 0x820-0x8ff: clean.
pcmcia_socket pcmcia_socket1: cs: IO port probe 0xc00-0xcf7: clean.
pcmcia_socket pcmcia_socket1: cs: IO port probe 0xa00-0xaff: clean.
psmouse serio2: ID: 10 00 64
EXT4-fs (sda3): internal journal on sda3:8
EXT4-fs (sda4): barriers enabled
kjournald2 starting: pid 2051, dev sda4:8, commit interval 5 seconds
EXT4-fs (sda4): internal journal on sda4:8
EXT4-fs (sda4): delayed allocation enabled
EXT4-fs: file extents enabled
EXT4-fs: mballoc enabled
EXT4-fs (sda4): mounted filesystem with ordered data mode
Adding 265064k swap on /dev/sda2. Priority:-1 extents:1 across:265064k
usb 2-2: USB disconnect, address 2
IBM TrackPoint firmware: 0x0e, buttons: 3/3
input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input9
Clocksource tsc unstable (delta = -78033180 ns)
oss_ich 0000:00:1f.5: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
usbcore: registered new interface driver oss_usb
ttyS1: LSR safety check engaged!
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ADDRCONF(NETDEV_UP): eth0: link is not ready
agpgart-intel 0000:00:00.0: AGP 2.0 bridge
agpgart-intel 0000:00:00.0: putting AGP V2 device into 4x mode
pci 0000:01:00.0: putting AGP V2 device into 4x mode
[drm] Setting GART location based on new memory map
[drm] Loading R100 Microcode
[drm] writeback test succeeded in 1 usecs
b43 ssb0:0: firmware: requesting b43/ucode5.fw
b43 ssb0:0: firmware: requesting b43/pcm5.fw
b43 ssb0:0: firmware: requesting b43/b0g0initvals5.fw
b43 ssb0:0: firmware: requesting b43/b0g0bsinitvals5.fw
b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10)
Registered led device: b43-phy0::tx
Registered led device: b43-phy0::rx
Registered led device: b43-phy0::radio
ADDRCONF(NETDEV_UP): wlan0: link is not ready
wlan0: authenticate with AP 00:1e:e5:79:4e:41
wlan0: authenticated
wlan0: associate with AP 00:1e:e5:79:4e:41
wlan0: RX AssocResp from 00:1e:e5:79:4e:41 (capab=0x11 status=0 aid=1)
wlan0: associated
ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
wlan0: no IPv6 routers present
usb 2-2: new full speed USB device using uhci_hcd and address 3
usb 2-2: configuration #1 chosen from 4 choices
Consoledump from an openGL game:
[nick@myhost nick]# tremulous
tremulous 1.1.0 linux-x86 Mar 17 2009
----- FS_Startup -----
Current search path:
/root/.tremulous/base
/opt/tremulous/base/vms-1.1.0.pk3 (4 files)
/opt/tremulous/base/map-uncreation-1.1.0.pk3 (110 files)
/opt/tremulous/base/map-tremor-1.1.0.pk3 (45 files)
/opt/tremulous/base/map-transit-1.1.0.pk3 (135 files)
/opt/tremulous/base/map-niveus-1.1.0.pk3 (134 files)
/opt/tremulous/base/map-nexus6-1.1.0.pk3 (151 files)
/opt/tremulous/base/map-karith-1.1.0.pk3 (118 files)
/opt/tremulous/base/map-atcs-1.1.0.pk3 (87 files)
/opt/tremulous/base/map-arachnid2-1.1.0.pk3 (67 files)
/opt/tremulous/base/data-1.1.0.pk3 (1229 files)
/opt/tremulous/base
2080 files in pk3 files
execing default.cfg
couldn't exec autogen.cfg
couldn't exec autoexec.cfg
Hunk_Clear: reset the hunk ok
----- Client Initialization -----
----- Initializing Renderer ----
----- Client Initialization Complete -----
----- R_Init -----
------- Input Initialization -------
Joystick is not active.
...loading libGL.so.1:
Calling SDL_Init(SDL_INIT_VIDEO)...
SDL_Init(SDL_INIT_VIDEO) passed.
Initializing OpenGL display
...setting mode 3: 640 480
Using 8/8/8 Color bits, 24 depth, 8 stencil display.
GL_RENDERER: Mesa DRI R100 (RV200 4C57) 20090101 AGP 4x x86/MMX/SSE2 TCL
Initializing OpenGL extensions
...GL_S3_s3tc not found
...ignoring GL_EXT_texture_env_add
...using GL_ARB_multitexture
...using GL_EXT_compiled_vertex_array
GL_VENDOR: Tungsten Graphics, Inc.
GL_RENDERER: Mesa DRI R100 (RV200 4C57) 20090101 AGP 4x x86/MMX/SSE2 TCL
GL_VERSION: 1.3 Mesa 7.6
GL_EXTENSIONS: GL_ARB_draw_buffers GL_ARB_imaging GL_ARB_multisample GL_ARB_multitexture GL_ARB_texture_border_clamp GL_ARB_texture_compression GL_ARB_texture_cube_map GL_ARB_texture_env_add GL_ARB_texture_env_combine GL_ARB_texture_env_crossbar GL_ARB_texture_env_dot3 GL_ARB_texture_mirrored_repeat GL_ARB_texture_rectangle GL_ARB_transpose_matrix GL_ARB_vertex_buffer_object GL_ARB_window_pos GL_EXT_abgr GL_EXT_bgra GL_EXT_blend_color GL_EXT_blend_logic_op GL_EXT_blend_minmax GL_EXT_blend_subtract GL_EXT_compiled_vertex_array GL_EXT_convolution GL_EXT_copy_texture GL_EXT_draw_range_elements GL_EXT_fog_coord GL_EXT_histogram GL_EXT_multi_draw_arrays GL_EXT_packed_depth_stencil GL_EXT_packed_pixels GL_EXT_polygon_offset GL_EXT_rescale_normal GL_EXT_secondary_color GL_EXT_separate_specular_color GL_EXT_stencil_wrap GL_EXT_subtexture GL_EXT_texture GL_EXT_texture3D GL_EXT_texture_edge_clamp GL_EXT_texture_env_add GL_EXT_texture_env_combine GL_EXT_texture_env_dot3 GL_EXT_texture_filter_anisotropic GL_EXT_texture_lod_bias GL_EXT_texture_mirror_clamp GL_EXT_texture_object GL_EXT_texture_rectangle GL_EXT_vertex_array GL_APPLE_packed_pixels GL_ATI_texture_env_combine3 GL_ATI_texture_mirror_once GL_IBM_multimode_draw_arrays GL_IBM_rasterpos_clip GL_IBM_texture_mirrored_repeat GL_MESA_ycbcr_texture GL_MESA_window_pos GL_NV_blend_square GL_NV_light_max_exponent GL_NV_texture_rectangle GL_NV_texgen_reflection GL_OES_read_format GL_SGI_color_matrix GL_SGI_color_table GL_SGIS_generate_mipmap GL_SGIS_texture_border_clamp GL_SGIS_texture_edge_clamp GL_SGIS_texture_lod GL_SUN_multi_draw_arrays
GL_MAX_TEXTURE_SIZE: 2048
GL_MAX_ACTIVE_TEXTURES_ARB: 3
PIXELFORMAT: color(24-bits) Z(24-bit) stencil(8-bits)
MODE: 3, 640 x 480 fullscreen hz:N/A
GAMMA: hardware w/ 0 overbright bits
CPU:
rendering primitives: single glDrawElements
texturemode: GL_LINEAR_MIPMAP_LINEAR
picmip: 0
texture bits: 0
multitexture: enabled
compiled vertex arrays: enabled
texenv add: disabled
compressed textures: disabled
Initializing Shaders
...loading 'scripts/uncreation.shader'
...loading 'scripts/q3map2_tremor.shader'
...loading 'scripts/tremor.shader'
...loading 'scripts/transit.shader'
...loading 'scripts/niveus.shader'
...loading 'scripts/nexus6.shader'
...loading 'scripts/karith.shader'
...loading 'scripts/atcs.shader'
...loading 'scripts/arachnid2.shader'
...loading 'scripts/jetpack.shader'
...loading 'scripts/core.shader'
...loading 'scripts/flame.shader'
...loading 'scripts/misc.shader'
...loading 'scripts/common-trem.shader'
...loading 'scripts/titan.shader'
...loading 'scripts/water.shader'
...loading 'scripts/displays.shader'
...loading 'scripts/plant_life.shader'
...loading 'scripts/stasis.shader'
...loading 'scripts/booster.shader'
...loading 'scripts/eggpod.shader'
...loading 'scripts/medistat.shader'
...loading 'scripts/mgturret.shader'
...loading 'scripts/reactor.shader'
...loading 'scripts/telenode.shader'
...loading 'scripts/trapper.shader'
...loading 'scripts/overmind.shader'
...loading 'scripts/tesla.shader'
...loading 'scripts/dcc.shader'
...loading 'scripts/hive.shader'
...loading 'scripts/level2.shader'
...loading 'scripts/human.shader'
...loading 'scripts/null.shader'
...loading 'scripts/weapons.shader'
...loading 'scripts/conkit.shader'
...loading 'scripts/advckit.shader'
...loading 'scripts/psaw.shader'
...loading 'scripts/mdriver.shader'
...loading 'scripts/flamer.shader'
...loading 'scripts/crosshairs.shader'
...loading 'scripts/grenade.shader'
...loading 'scripts/splash.shader'
...loading 'scripts/marks.shader'
...loading 'scripts/sprites.shader'
...loading 'scripts/muzzleflashes.shader'
----- finished R_Init -----
------ Initializing Sound ------
Initializing SDL audio driver...
ALSA lib confmisc.c:768:(parse_card) cannot find card '0'
ALSA lib conf.c:4154:(_snd_config_evaluate) function snd_func_card_driver returned error: No such file or directory
ALSA lib confmisc.c:392:(snd_func_concat) error evaluating strings
ALSA lib conf.c:4154:(_snd_config_evaluate) function snd_func_concat returned error: No such file or directory
ALSA lib confmisc.c:1251:(snd_func_refer) error evaluating name
ALSA lib conf.c:4154:(_snd_config_evaluate) function snd_func_refer returned error: No such file or directory
ALSA lib conf.c:4633:(snd_config_expand) Evaluate error: No such file or directory
ALSA lib pcm.c:2211:(snd_pcm_open_noupdate) Unknown PCM default
SDL audio driver is "dsp".
SDL_AudioSpec:
Format: AUDIO_S16LSB
Freq: 22050
Samples: 512
Channels: 2
Starting SDL audio callback...
SDL audio initialized.
----- Sound Info -----
1 stereo
16384 samples
16 samplebits
1 submission_chunk
22050 speed
0xa4241f8 dma buffer
No background file.
Sound intialization successful.
Sound memory manager started
Loading vm file vm/ui.qvm...
...which has vmMagic VM_MAGIC_VER2
Loading 1075 jump table targets
VM file ui compiled to 786313 bytes of code
ui loaded in 4596672 bytes on the hunk
UI menu load time = 705 milli seconds
UI menu load time = 55 milli seconds
UI menu load time = 51 milli seconds
--- Common Initialization Complete ---
Opening IP socket: localhost:30720
Hostname: myhost.localdomain
Alias: myhost
IP: 127.0.0.1
Started tty console (use +set ttycon 0 to disable)
*********************************WARN_ONCE*********************************
File radeon_tcl.c function radeon_run_tcl_render line 499
Rendering was 734 commands larger than predicted size. We might overflow command buffer.
----- CL_Shutdown -----
Closing SDL audio device...
SDL audio device shut down.
RE_Shutdown( 1 )
----- CL_Shutdown -----
Shutdown tty console
[nick@myhost nick]#
Display all 3035 possibilities? (y or n)

radionecrotic wrote:
Has this always been the case for you or did you update recently and it started happening? There appears to be some sort of conflict with some machines and new changes to the kernel to allow quicker mode setting. See http://bbs.archlinux.org/viewtopic.php? … 47#p659347. I had to add !radeon to my MODULES list in /etc/rc.conf to get X to even work at all. I don't run anything that uses OpenGL so I don't know if it'll address your issue.
You may also want to take a look at http://bbs.archlinux.org/viewtopic.php? … 20#p662920 and add intel_agp radeon (that's two modules, in that order) to your MODULES list.
Well, I was having the graphical corruption issue in that first thread until I added the nomodeset boot flag. As for the modesetting, I think it directly conflicts with my boot flag, and without it, I get corruption. =/

After installing Radeon Graphics drivers on Windows 8 Flash player and Adobe Flash Pro didn't re-ins

Hi,
On a Windows 8 Pro desktop I recently installed Flash Pro and it seemed to work great.   Also Flash Player was working great as well. But I noticed on Adobe Photoshop CS6 that the 3d controls were not working. So I installed the the Radeon Graphics AMD Catylyst Control series for an onder 4800 series graphics card.   Has anyone else had problems with 4800 series AMD ATI video cards? Any suggestions after reviewing the tables below?
I then noticed that the 3d controls in Adobe Photoshop worked great. But...
Later, however, I noticed that Flash Play would green screen on some videos in IE10. So I tried to follow the Flash Player repair procedure such as remove checkbox on Active X Filter, Adding Compatibility mode without success in IE so I installed Mozilla Fire Fox and re-installed flash player etc... which worke don Mozilla but not IE10. So I'm thinking this new software from AMD caused several problems to occur and not sure how to fix them. I still want 3d controls on my video card and now I'm thinking about starting a fresh install before installing Adobe software with a new NVidia card or a trusted AMD ATI card because this legacy 4800 doesn't seem to be cutting.
Here is my system settings and after this table are the errors I got upon reinstalling Flash pro.    Note: These were not critical errors so I was still able to run Flash Pro. I was never able to run Flash Player on IE10 after upgrading my video card software (Catalyst Control Center).   However Flash Player does seem to work great on Mozilla Firefox after re-installing Adobe Flash.   When I try to install Flash Player in IE10 I get a title screen of "Update Flash" with no content whatsover.
TABLE 1 - OS settings and Hard Ware
OS Name Microsoft Windows 8 Pro
Version 6.2.9200 Build 9200
Other OS Description Not Available
OS Manufacturer Microsoft Corporation
System Name XxXxXxXx
System Manufacturer Gigabyte Technology Co., Ltd.
System Model UD3R-SLI
System Type x64-based PC
System SKU
Processor Intel(R) Core(TM) i7 CPU         940 @ 2.93GHz, 2931 Mhz, 4 Core(s), 8 Logical Processor(s)
BIOS Version/Date Award Software International, Inc. F9, 3/11/2010
SMBIOS Version 2.4
Embedded Controller Version 255.255
BIOS Mode Legacy
BaseBoard Manufacturer Gigabyte Technology Co., Ltd.
BaseBoard Model Not Available
BaseBoard Name Base Board
Platform Role Desktop
Secure Boot State Unsupported
PCR7 Configuration Binding Not Possible
Windows Directory C:\Windows
System Directory C:\Windows\system32
Boot Device \Device\HarddiskVolume1
Locale United States
Hardware Abstraction Layer Version = "6.2.9200.16442"
TABLE 2 - Flash Pro install errors
Exit Code: 6
Please see specific errors and warnings below for troubleshooting. For example, ERROR: DF012, DF024 ... WARNING: DF054, DW066 ...
WARNING: DW066: OS requirements not met for {9E0AF030-AC6B-11E0-8837-00215AEA26C9} Microsoft Visual C++ 2010 Redistributable Package (x86) 10.0.40219.1
WARNING: DW066: OS requirements not met for {9AB0EFC0-AC6B-11E0-9E61-00215AEA26C9} Microsoft Visual C++ 2005 Redistributable Package (x86) 6.0.2900.2180
WARNING: DW066: OS requirements not met for {B2579A74-F4AA-40B1-B47A-E73BA173EC8C} Camera Profiles Installer_7.3_AdobeCameraRawProfile7.0All 7.3.0.0
WARNING: DW066: OS requirements not met for {539AEF15-3A2B-4A31-A587-7E90F7D9C700} Camera Profiles Installer 7.0.0.0
WARNING: DW066: OS requirements not met for {354D20E6-A25F-4728-9DA6-C9003D8F2928} Adobe Player for Embedding 3.3 3.3.0.0
WARNING: DW066: OS requirements not met for {DE88AA40-6766-43D3-A755-8FC374B3D2C3} DynamiclinkSupport 6.0.0.0
WARNING: DW066: OS requirements not met for {B8ADDCBD-30D9-4366-AE25-089CEF76C8E1} Suite Shared Configuration CS6 3.0.0.0
WARNING: DW066: OS requirements not met for {9254D539-549A-41DD-A7DA-251766F2B76F} Adobe Player for Embedding x64 3.3 3.3.0.0
WARNING: DW066: OS requirements not met for {E8B1DAAA-0B6B-44E6-A2D3-8E418EA0EA85} AdobeCMaps CS6
4.0.0.0
WARNING: DW066: OS requirements not met for {99290358-A784-4218-A7BA-954AE5F9207C} AdobeCMaps x64 CS6 4.0.0.0
WARNING: DW066: OS requirements not met for {92D58719-BBC1-4CC3-A08B-56C9E884CC2C} Microsoft_VC80_CRT_x86 1.0.0.0
WARNING: DW066: OS requirements not met for {08D2E121-7F6A-43EB-97FD-629B44903403} Microsoft_VC90_CRT_x86 1.0.0.0
WARNING: DW066: OS requirements not met for {9C4AA28F-AC6B-11E0-8997-00215AEA26C9} Microsoft Visual C++ 2008 Redistributable Package (x86) 9.0.30729.4148
WARNING: DW066: OS requirements not met for {9B78FAB0-AC6B-11E0-8EF3-00215AEA26C9} Microsoft Visual C++ 2008 Redistributable Package (x64) 9.0.30729.4148
WARNING: DW066: OS requirements not met for {093DEFC4-542D-4D0A-8162-0592055515F4} Adobe XMP Panels 4.0.0.0
WARNING: DW066: OS requirements not met for {9D2A060F-AC6B-11E0-8C00-00215AEA26C9} Microsoft Visual C++ 2010 Redistributable Package (x64) 10.0.40219.1
WARNING: DW066: OS requirements not met for {088691E4-0205-41CB-B073-4907FDF16D8E} Photoshop Camera Raw 7_7.3_AdobeCameraRaw7.0All 7.3.0.0
WARNING: DW066: OS requirements not met for {CFC3110A-491C-4DBF-A97D-66C567600A2F} Photoshop Camera Raw 7 7.0.0.0
WARNING: DW066: OS requirements not met for {557F9FD3-EED8-43D7-AF29-0F19CA832728} AdobePDFL CS6
10.9.0.0
WARNING: DW066: OS requirements not met for {246C4B99-19F7-4475-9787-5FF8595B86D7} AdobePDFL x64 CS6 10.9.0.0
WARNING: DW066: OS requirements not met for {A0F72081-99FB-4FFA-AE1A-62B5A656CAC1} AdobeTypeSupport CS6 11.0.0.0
WARNING: DW066: OS requirements not met for {B2D792AF-F407-4EFA-9A03-3F2A476146F6} AdobeTypeSupport x64 CS6 11.0.0.0
WARNING: DW066: OS requirements not met for {44099F03-9BD7-40DD-A6B3-580F7FFC49BC} Photoshop Camera Raw 7 (64 bit)_7.3_AdobeCameraRaw7.0All-x64 7.3.0.0
WARNING: DW066: OS requirements not met for {55F0AFED-606D-476A-A07A-134291002FBA} Photoshop Camera Raw 7 (64 bit) 7.0.0.0
WARNING: DW066: OS requirements not met for {EB2A8CD4-B247-4810-A294-E3DB8EDC6060} Adobe CSXS Extensions CS6 3.0.0.0
WARNING: DW066: OS requirements not met for {DC00A3E1-9C61-4B11-8070-B592E68D2B3C} Adobe Linguistics CS6 6.0.0.0
WARNING: DW066: OS requirements not met for {94FEA41F-7345-429F-AA31-5C615F24CE29} Adobe WinSoft Linguistics Plugin CS6 1.3.0.0
WARNING: DW066: OS requirements not met for {7CA3FAD4-7B82-473C-8207-5A283E90742A} Adobe WinSoft Linguistics Plugin CS6 x64 1.3.0.0
WARNING: DW066: OS requirements not met for {0C4E7429-E920-4125-980E-029A87AE0A4D} AdobeColorCommonSetCMYK CS6 4.0.0.0
WARNING: DW066: OS requirements not met for {C7B1C1B3-368D-4C32-A818-83F1554EB398} AdobeColorCommonSetRGB CS6 4.0.0.0
WARNING: DW066: OS requirements not met for {51C77DC1-5C75-4491-8645-A17CC33F5A36} AdobeColorEU CS6 4.0.0.0
WARNING: DW066: OS requirements not met for {26F763C9-076F-473D-9A0E-4050C973737C} AdobeColorJA CS6 4.0.0.0
WARNING: DW066: OS requirements not met for {BB66788C-4C4F-4EB0-B146-9178857DE287} AdobeColorNA CS6 4.0.0.0
WARNING: DW066: OS requirements not met for {D38116C8-C472-4BB0-AD6F-0C1DD1320D1D} AdobeHelp
4.0.0.0
WARNING: DW066: OS requirements not met for {99FE4191-AC6B-11E0-B602-00215AEA26C9} Microsoft Visual C++ 2005 Redistributable Package (x64) 6.0.2900.2180
WARNING: DW066: OS requirements not met for {7E91BB17-16A1-42CE-9502-D6C98BE04920} PDF Settings CS6 11.0.0.0
WARNING: DW066: OS requirements not met for {C41A769E-27ED-44F7-8A11-F2E32F538E05} Adobe Linguistics CS6 x64 6.0.0.0
WARNING: DW066: OS requirements not met for {CFA46C39-C539-4BE9-9364-495003C714AD} Adobe SwitchBoard 2.0 2.0.0.0
WARNING: DW066: OS requirements not met for {E9C77AF1-5C15-4C59-BA6F-88CB319EE9C8} Adobe CSXS Infrastructure CS6_3.0.2_AdobeCSXSInfrastructure3-mul 3.0.2.0
WARNING: DW066: OS requirements not met for {36682D68-3834-487E-BA49-DFA4AB0A2E32} Adobe CSXS Infrastructure CS6 3.0.0.0
WARNING: DW066: OS requirements not met for {F2F2F788-A17F-4CEC-A03C-DFB778E9D901} Adobe Media Encoder CS6 X64 6.0.0.0
WARNING: DW066: OS requirements not met for {EFBC1075-F890-4293-A0D1-04BE66EE2AB3} Adobe ExtendScript Toolkit CS6 3.8.0.0
WARNING: DW066: OS requirements not met for {FB21FA75-1447-4753-B7E3-87F040DFE0F5} Adobe Extension Manager CS6_6.0.4_AdobeExtensionManager6.0All 6.0.4.0
WARNING: DW066: OS requirements not met for {83463106-DD1C-4FE5-A61C-DF6715472AD4} Adobe Extension Manager CS6 6.0.0.0
WARNING: DW066: OS requirements not met for {CC006FD6-00EF-46FC-ACA0-7A28EFF44D20} Adobe Media Encoder CS6 6.0.0.0
WARNING: DW066: OS requirements not met for {B1CE96E8-76BA-454A-91A8-D8A5D712234E} Adobe Bridge CS6_5.0.1.1_AdobeBridge5-mul 5.0.1.1
WARNING: DW066: OS requirements not met for {97BA0109-F6BE-4F50-8904-C19442D7216E} Adobe Bridge CS6 5.0.0.0
WARNING: DW066: OS requirements not met for {F14215C3-991E-4A8E-9596-B013C42A673F} Adobe Bridge CS6 (64 Bit)_5.0.1.1_AdobeBridge5-mul-x64 5.0.1.1
WARNING: DW066: OS requirements not met for {00496505-D56B-4B07-A8C5-70A0B4E689F7} Adobe Bridge CS6 (64 Bit) 5.0.0.0
WARNING: DW066: OS requirements not met for {BD5669B5-49FF-4490-B956-E9D7CB9B0ADC} Adobe Flash CS6 Driver 12.0.0.0
WARNING: DW066: OS requirements not met for {D2583A3E-399C-45D7-8AF1-FE5BAFC946CF} AIR for Apple iOS support (FP) 3.0.0.0
WARNING: DW066: OS requirements not met for {4FAB339E-2132-434F-9376-9CD735E4C69C} Adobe Flash CS6 12.0.0.0
WARNING: DW066: OS requirements not met for {1E621A15-CD9F-4543-B3F6-8032B3647A6A} Adobe Flash CS6_AdobeFlash12.0-en_USLanguagePack 12.0.0.0
----------- Payload: {0C4E7429-E920-4125-980E-029A87AE0A4D} AdobeColorCommonSetCMYK CS6 4.0.0.0 - ----------
WARNING: DF054: Unable to read Adobe file version for file path 'C:\Program Files (x86)\Common Files\Adobe\Color\Profiles\Recommended\USWebCoatedSWOP.icc'(Seq 16)
ERROR: DF012: Unable to find file(Seq 16)
ERROR: DF024: Unable to preserve original file at "C:\Program Files (x86)\Common
Files\Adobe\Color\Profiles\Recommended\USWebCoatedSWOP.icc" Error 32 The process cannot access the file because it is being used by another process.(Seq 16)
ERROR: DW063: Command ARKDeleteFileCommand failed.(Seq 16)
----------- Payload: {4FAB339E-2132-434F-9376-9CD735E4C69C} Adobe Flash CS6 12.0.0.0 -----------ERROR: DR012: Setting Registry Value Failed. Error 5 Access is denied.(Seq 151)
ERROR: DW050: The following payload errors were found during install:
ERROR: DW050: - AdobeColorCommonSetCMYK CS6: Install failed -------------------------------------------------------------------------------------
Thank you,
Marc

Regarding the Flash Player problem, disable Hardware Acceleration to circumvent driver incompatibilities.
Regarding the Flash Pro installation problems, post in the Flash forums or http://forums.adobe.com/community/download_install_setup

Help! Blue Screen hangs on G5 after installing Radeon 9600 pro...

Hi
I am having major problems with my G5, after working out that my old graphics card was knackered i bought a new ati radeon 9600 pro.
Every time i start up i get the apple logo then it hangs on a blue screen. I can get it to boot in safe mode and i've tried uninstalling the ati software and i've even re-installed OS X and wiped the disk to no avail.
I've also downloaded latest card drivers and looked for help on ati website but no real help there.
I would appreciate any help.thanks

I just installed an ATI X800 XT and it does exactly the same thing. Even on a new system build. Ironically enough I just took out a Radeon 9600XT that worked fine. Have you found a solution yet? I think I'm going to try and reset my pram. I'll let you know what I find out.

Installed Radeon 6870 - bad video performance in VLC

I've added a Radeon GPU to my i3-530 which used to handle video. I installed the opensource drivers and I get occasional lags, choppy parts during video playback using VLC. I tried adding the following to my radeon conf as per wiki but that caused tearing:
Section "Device"
Identifier "Radeon"
Driver "radeon"
Option "AccelMethod" "EXA"
EndSection
I assume KMS is enabled, since that's the default. I don't know how to check though. What could be going wrong?
Thanks

I tried. The way I understand he's simply telling me to install the packages he has listed, correct? I did that via AUR and yaourt. As I said, I could install most of them but not mesa-full. I'm trying again now so I can post the error I get....
Didn't do anything different than the last two times and this time mesa-full installed successfully. Some packages still don't want to cooperate but I'll reboot and see where I stand.
Problem persists. I get an error installing lib32-libdrm-git:
error: target not found: gcc-multilib
and I think that x86_64 doesn't apply to me on my intel CPU so now I've installed everything and the videos still have their stutter moments. Makes me want to cry. I should be studying for exams but this is such a nice excuse not to...
Last edited by hypertyper (2012-01-11 10:40:28)

Installing Radeon 7500

Similar Messages

Maybe you are looking for