Installing RADIUS server and Snap-Ins

Following TID 10078616 to install RADIUS server components and Snap-Ins
and the option to choose those two items are not available. Just
wondering what gives? Any ideas or has anyone else run across this?
Running BM3.8 sp2a on Netware 6.5 sp2.
Thanks in advance,
Ben

To do a manual install of RADIUS you need the following files
bauthpxy.nlm
radus.nlm
You should be able to find them on the BM disks and you can
place them on any up to date NW server running NMAS without
any license issues.
Roger
<[email protected]> wrote in message news:cYF4e.3659$[email protected]..
> Following TID 10078616 to install RADIUS server components and Snap-Ins
> and the option to choose those two items are not available. Just
> wondering what gives? Any ideas or has anyone else run across this?
> Running BM3.8 sp2a on Netware 6.5 sp2.
>
> Thanks in advance,
>
> Ben

Similar Messages

How to identify the installed Weblogic Server and JDK are 32bit or 64bit?

Hi everyone,
I have a question ~
Both Weblogic Server and JAVA JDK are installed on the server already, but I only know the Weblogic Server is 10.3.4.0 and JAVA JDK version is 1.6.0_25.
I know the 64bit Weblogic Server installation file is a wlsXXXX_generic.jar package and 64bit JAVA JDK needed also.
But, since the Weblogic installed already, there are no such installation files on the Linux Server now.
I have tried the "java -version" for java version and check the Weblogic version from Weblogic console.
How to identify the installed Weblogic Server and JDK are 32bit or 64bit with Linux command? Or is there any way to check it?

What you can try to do is use WLST (or an MBean browser, such as JConsole or JRockit Mission Control) and connect to the adminserver.
For example when using WLST:
# set the environment by using setWLSEnv.sh (located in the ${WL_HOME}/server/bin directory).
# start WLST by using: java weblogic.WLST
# connect to the adminserver
connect('adminusername','adminpassword');
# change to the serverruntime environment
serverRuntime();
# show the attributes
ls();
# Here an attribute is shown called WebLogicVersion that shows the version of WebLogic
-r-- WeblogicVersion WebLogic Server 10.3.5.0 Fri Apr 1 20:20:06 PDT 2011 1398638
# Note that this does not show if is 32 bits or 64 bits to retrieve this information you have obtain the JVM version
# change the directory
cd('JVMRuntime/AdminServer');
# show the attributes
ls();
-r-- Version R28.0.1-21-133393-1.6.0_20-20100512-2126-linux-x86_64
# when you have something like x86 at the you are running a 32 bit version, if you have something like x86_64 you are running a 64 bits versionAs mentioned above you can also retrieve this information by using a MBean browser.

Dynamic VLAN Assignment with RADIUS Server and Aironet Access Points

Hi Guys,
I would like to go for "Dynamic VLAN Assignment with RADIUS Server and Aironet Access Points 1300". I want the AP to broadcast only 1 SSID. The client find the SSID ->put in his user credential->Raudius athentication->assign him to an specific vlan based on his groupship.
The problem here is that I don't have a AP controller but only configurable Aironet Access Points 1300. I can connect to the radius server, but I am not sure how to confirgure the AP's port, radio port, vlan and SSID.
http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a008076317c.shtml#switch
I go through some references:
3.5 RADIUS-Based VLAN Access Control
As discussed earlier, each SSID is mapped to a default VLAN-ID on the wired side. The IT administrator may wish to impose back end (such as RADIUS)-based VLAN access control using 802.1X or MAC address authentication mechanisms. For example, if the WLAN is set up such that all VLANs use 802.1X and similar encryption mechanisms for WLAN user access, then a user can "hop" from one VLAN to another by simply changing the SSID and successfully authenticating to the access point (using 802.1X). This may not be preferred if the WLAN user is confined to a particular VLAN.
There are two different ways to implement RADIUS-based VLAN access control features:
1. RADIUS-based SSID access control: Upon successful 802.1X or MAC address authentication, the RADIUS server passes back the allowed SSID list for the WLAN user to the access point or bridge. If the user used an SSID on the allowed SSID list, then the user is allowed to associate to the WLAN. Otherwise, the user is disassociated from the access point or bridge.
2. RADIUS-based VLAN assignment: Upon successful 802.1X or MAC address authentication, the RADIUS server assigns the user to a predetermined VLAN-ID on the wired side. The SSID used for WLAN access doesn't matter because the user is always assigned to this predetermined VLAN-ID.
extract from: Wireless Virtual LAN Deployment Guide
http://www.cisco.com/en/US/products/hw/wireless/ps430/prod_technical_reference09186a00801444a1.html
==============================================================
Dynamic VLAN Assignment with RADIUS Server and Wireless LAN Controller Configuration Example
http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a008076317c.shtml#switch
==============================================================
Controller: Wireless Domain Services Configuration
http://www.cisco.com/en/US/products/hw/wireless/ps4570/products_configuration_example09186a00801c951f.shtml
Any help on this issue is appreicated.
Thanks.

I'm not sure if the Autonomous APs have the option for AAA Override. On the WLC, I can go into the BSSID, Security, Advanced, and there's a checkbox that I would check to allow a Radius server to send back the VLAN.
I did a little research and it looks like the 1300 may give this option but instead is defined as "VLAN Override". I've found the release notes for 12.3(7)JA5 (not sure what version you're running) that give mention and a link to configuring EAP on page 4: http://www.ciscosystems.ch/en/US/docs/wireless/access_point/1300/release/notes/o37ja5rn.pdf
Hope this helps

Using RSA RADIUS Server and WLC 7.4 to dynamically asssign users to VLAN

Hello,
What we are trying to do:
John logs on to wifi using RSA fob for password. RSA sends back auth request with attibutes to WLC 7.4 that magically knows how to interpret the attributes and puts John on vlan 10. Mary logs on with her fob and gets put on VLAN 20.
We dont have ISE. We dont have ACS. We have RSA Authentication Manager 7.0
We have looked high and low for documentation for this kind of setup and we find stuff that is close to a match but not quite.
Here is what we are seeing
1. dynamic vlan assignment is not working -- radius server is set with the attributes
2. RSA authentication works
3. John and Mary are always put into the VLAN where the MGMT interface is
4. I can see that attributes are making it back to the WLC by sniffing
We are stuck at this point. Any help would be much appreciated,
P.

Here is a little more background:
We have created a dynamic interface in VLAN 157
Wireless LAN has been assigned to MGMT interface which is on VLAN 35
This is a VWLC ver 7.4.100
AP is attached to VWLC (only FlexConnect mode is supported)
RADIUS Server has been configured
Users are getting assigned to VLAN 35
Also I have attached some screenshots and two packet captures so you can see what the RSA is sending back with your own eyes
I dont see any atttributes in the capture when RSA sends to the VWLC
I see attributes in the capture when RSA send to my local RADIUS Client (My PC)
And to answer your question we have sending a VLAN ID (157)

What attributes are shared between a Radius Server and a WLC?

I have a customer who is trying to setup a Radius server to authenticate Management users for the controller,
she is using a Microsoft NPS R2 server. All good at this point.
She needs to know what attributes are shared between the server and the WLC to complete the authentication
because she is being successfully authenticated, but still unable to access the WLC.
Someone knows what those attributes are?
The only information at the moment that I found, was on a document that said that different management
users can receive different Vendor-specific Attributes. That means that the returned attributes to the WLC
will depend of what radius server model or platform you are using.

Robin,
For using Microsoft radius to authenticate management users, you can reference this document, which shows you the steps involved.
http://www.cisco.com/c/en/us/support/docs/wireless-mobility/wireless-lan-wlan/91392-airespace-vsa-msias-config.html
Thanks,
Scott
*****Help out other by using the rating system and marking answered questions as "Answered"*****

Help required in installing VM Server and Manager 3.1.1 + latest patch.

Hi,
I have 3 servers with 12GB ram and two 300 GB HDD (local) each, No Shared storage.
I am planning to install Oracle VM server 3.1.1 Build 544 and VM Manager 3.1.1 Build 524.
VM manager installed on Dom0 in one of the VM server (found some blog which describes how to implement it).
I have some questions running through my mind and help to solve it s really appreciated.
1) Is ORACLE VM SERVER PATCH 3.1.1-524 RELEASE is complete OS or its just patch which has to installed over 3.1.1 VM server. Because the patch readme says *"This patch update is a complete Oracle VM Server 3.1.1 installer ISO" ??*
2) I read somewhere in the forum that the 3.X version cannot use the disk where OS is installed as storage repository. in that case i will be loosing around 250 GB on each machine, on which i have installed VM server. Is it TRUE??
3) Is it possible to update VM server first and then update VM manager ( before creating server pool etc) ??
The servers are not connected to internet or SAN no i cannot use YUM or SAN update methods and I have very limited access to this servers physically.
Thanks in advance.

1. Its patch 544. Both can be downloaded and are complete installs. If you have YUM setup in an existing environment.... the VM servers can be upgraded via YUM. The VM Manager has to be upgraded via the installer.
2. Yes. This is true. Maybe your local RAID controller can present the storage as two separate LUNS/Disks even though they maybe setup as a mirror. If not, then you're out of luck. Virtual box can use local storage that OS is installed on. Oracle VM 3.1.1 can't.
3. Yes. You can install the 544 version of 3.1.1 on the servers before attaching them to the VM Manager. YUM should be used to upgrade the servers if they are already attached to a VM Manager. You would then upgrade the manager first and then upgrade the servers.

Installing HTML Server and HTML DB

I am installing the HTML server and HTML db. I get to the screen to enter the HTML DB information and an failing with an error ORA-01017:Invalid username and password. I have checked my SYS password by logging into the database I am using. From the instructions I though the HTML DB Password would be created on install. I have gotten this error before when my tnsnames.ora file was not correct, but I am using it with not problems for database links.
Does anybody have a suggestion
Thanks

Thanks for the response.
I have a running Oracle 10g Enterprise running in /var/oracle/product/10.1.01.E.on a test Linux system. I have started the install of the companion disk, and when the install screen comes up I enter Name=>MasterProjEntHTML (MasterProjEnt is the name of the database I am using). I enter a new directory for path ( as per the Companion CD Install Instruction that said you need to install the HTML server in a new oracle home directory), /var/oracle/product/companion_1. I then press next and wait for it to load. I select Oracle Database 10g Companion Products. I select Apache Standalone and HTML DB from the Available Products Components screen. Next comes up the Enter HTML DB Congif screen. I enter host name, port, DSN as mral.home.com ( as listed in global naming parameter and tnsnames.ora), I enter my sys password and then the HTML DB password. When I hit next, if get the following. "ERROR: SQLException occured while connecting to the database. Please check the connection details of the database you specifiec and retry. ORA_01017:Invalid username/password, logon denied"
At this point I went to my desktop and remote logged in using my user password and name. I was able to connect. Next I went back on the server and logged in as sys with the password and was able to connect. So at this stage I think my sys password is ok.
Did I misunderstand the instructions about the directory for the HMTL server?
Any help would be appreciated as I am working on my masters and this is necessary to complete the project.
Thanks again

Microsoft outlook 2010 not working after installing proxy server and ForeFront TMG firewall

I am trying to have Outlook 2010 work though proxy server recently installed on internal network, I have configured IE to use the proxy settings, but I cannot find the
same with Outlook 2010, I want to clarify that we use Outlook 2010 to connect to internet email and we installed ForeFront TMG firewall on the proxy server and as a result of that we changed the IP settings and after that Outlook stopped sending and receiving
mails and gives error: “receiving reported error (0x800408fc): 'The Server name you entered cannot be found (it might be down temporarily).”
So please help us by sharing how to fix this issue to make Outlook work though proxy server
Thanks

Hi,
Are you using Exchange account? If you are changing your Exchange account to use a proxy server, I suggest we can create new profile and automatically re-configuring your account with autodiscover service to have a try:
http://support.microsoft.com/kb/829918
If the account can’t be configured automatically, please manually configure the account and change the settings for procy server:
1. In the Account Settings dialog box, click the
Email tab, click to select the Exchange account, and then click
Change.
2. Click More Settings. On the Connections tab, click
Exchange Proxy Settings.
3. In Connection settings, type the proxy server FQDN under Use this URL to connect to my proxy server for Exchange, click OK to have a try, and then click
OK to save all settings.
4. Restart Outlook.
Regards,
Winnie Liang
TechNet Community Support

I installed Lion Server and when I click on the Profile Manager I get an error and nothing shows - I can't figure out how to re install Lion Server to fix this - any ideas

I installed Lion Server on my Mac Pro. Everything looked to be working until I checked Profile Manager and I get an error message "Error Reading Settings" Not sure how to fix it. Tried to download Server agian but can't.

Look at /usr/lib/libpq library. I have had the same problem. There were following files:
-rwxr-xr-x 1 root wheel 163680 30 jul 21:17 /usr/lib/libpq.5.4.dylib
lrwxr-xr-x 1 root wheel 15 30 jul 21:20 /usr/lib/libpq.dylib -> libpq.5.4.dylib
Result for command sudo /Applications/Server.app/Contents/ServerRoot/usr/share/devicemgr/backend/wipeDB .sh was:
Password:
devicemgr:state = "STOPPED"
postgres:state = "RUNNING"
(in /Applications/Server.app/Contents/ServerRoot/usr/share/devicemgr/backend)
Couldn't drop device_management : #<RuntimeError: Please install the postgresql adapter: `gem install activerecord-postgresql-adapter` (dlopen(/Applications/Server.app/Contents/ServerRoot/usr/share/devicemgr/backen d/vendor/gems/pg-0.9.0/lib/pg_ext.bundle, 9): Library not loaded: /usr/lib/libpq.5.dylib
Referenced from: /Applications/Server.app/Contents/ServerRoot/usr/share/devicemgr/backend/vendor /gems/pg-0.9.0/lib/pg_ext.bundle
Reason: image not found - /Applications/Server.app/Contents/ServerRoot/usr/share/devicemgr/backend/vendor /gems/pg-0.9.0/lib/pg_ext.bundle)>
(in /Applications/Server.app/Contents/ServerRoot/usr/share/devicemgr/backend)
Please install the postgresql adapter: `gem install activerecord-postgresql-adapter` (dlopen(/Applications/Server.app/Contents/ServerRoot/usr/share/devicemgr/backen d/vendor/gems/pg-0.9.0/lib/pg_ext.bundle, 9): Library not loaded: /usr/lib/libpq.5.dylib
Referenced from: /Applications/Server.app/Contents/ServerRoot/usr/share/devicemgr/backend/vendor /gems/pg-0.9.0/lib/pg_ext.bundle
Reason: image not found - /Applications/Server.app/Contents/ServerRoot/usr/share/devicemgr/backend/vendor /gems/pg-0.9.0/lib/pg_ext.bundle)
/Applications/Server.app/Contents/ServerRoot/usr/share/devicemgr/backend/vendor/ rails/activerecord/lib/active_record/connection_adapters/abstract/connection_spe cification.rb:76:in `establish_connection'
/Applications/Server.app/Contents/ServerRoot/usr/share/devicemgr/backend/vendor/ rails/railties/lib/tasks/databases.rake:69:in `create_database'
/Applications/Server.app/Contents/ServerRoot/usr/share/devicemgr/backend/vendor/ rails/railties/lib/tasks/databases.rake:31
/System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/ruby/1.8/rake.rb: 636:in `call'
/System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/ruby/1.8/rake.rb: 636:in `execute'
/System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/ruby/1.8/rake.rb: 631:in `each'
/System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/ruby/1.8/rake.rb: 631:in `execute'
/System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/ruby/1.8/rake.rb: 597:in `invoke_with_call_chain'
/System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/ruby/1.8/monitor. rb:242:in `synchronize'
/System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/ruby/1.8/rake.rb: 590:in `invoke_with_call_chain'
/System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/ruby/1.8/rake.rb: 583:in `invoke'
/System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/ruby/1.8/rake.rb: 2051:in `invoke_task'
/System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/ruby/1.8/rake.rb: 2029:in `top_level'
/System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/ruby/1.8/rake.rb: 2029:in `each'
/System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/ruby/1.8/rake.rb: 2029:in `top_level'
/System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/ruby/1.8/rake.rb: 2068:in `standard_exception_handling'
/System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/ruby/1.8/rake.rb: 2023:in `top_level'
/System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/ruby/1.8/rake.rb: 2001:in `run'
/System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/ruby/1.8/rake.rb: 2068:in `standard_exception_handling'
/System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/ruby/1.8/rake.rb: 1998:in `run'
/usr/bin/rake:31
Couldn't create database for {"adapter"=>"postgresql", "username"=>"_devicemgr", "encoding"=>"UTF8", "pool"=>5, "database"=>"device_management"}
devicemgr:state = "STARTING"
There was missing symlink to right version of libpq dynamic library!
After I entered the following commands and now it works well for me:
$ cd /usr/lib
$ sudo ln -s libpq.5.4.dylib libpq.5.dylib
$ sudo /Applications/Server.app/Contents/ServerRoot/usr/share/devicemgr/backend/wipeDB .sh
devicemgr:state = "STOPPED"
postgres:state = "RUNNING"
(in /Applications/Server.app/Contents/ServerRoot/usr/share/devicemgr/backend)
(in /Applications/Server.app/Contents/ServerRoot/usr/share/devicemgr/backend)
devicemgr:state = "RUNNING"
Milan

Installing EP server and NWDS

Hi all,
I didnt know where to post this, so i did it here.
I bought a new laptop and i am trying to install the EP server and NWDS. My laptop has Window 7 Professional 64 bit OS. Did anyone try to install and be able to work with the same. Please help me.
Thank You.
Kind Regards,
Manoj Durairaj

Hi Manoj,
See /message/9180864#9180864 [original link is broken] and the links provided there for some hints.
Have you had some success in the meantime?!
Hope it helps
Detlev

Installed mavericks server and now some users don't have access to folders!? Why and how do I fix it???

I have just upgraded the server and os to mavericks and now users that used to be able to open and save or even log in are now locked out with the server saying wrong password. I reset their password and still nothing. I created a new user and they can't even log in? Why now? And how do I fix this. It seems that some users and groups now don't have access and all that was done was to let the group open a shared folder that they have access before. I reset everything and am now very frustrated!!!

Hi
Seem to be an issue with Maverick
After trying to solve the issue with all tips i found here and on the net
I decided to go back to Mountain Lion for my server using TimeMachine backup, and stay with Maverick for my imacs
Work well again
Until Apple will communicate on it or deliver a patch, i would suggest to do the same

Trying to install VM Server and not getting the CD found screen to display

Trying to install Oracle VM Server from a CDROM:
1.     Insert the Oracle VM Server CDROM into your CDROM drive.
2.     Boot the computer with the Oracle VM Server CDROM.
3.     The Oracle VM Server screen is displayed.
All that went fine but not getting the CD found screen to display. Instead it says the device wasn't found and shows a list of drivers, none of which seem to match the CD drive. Anyone have any ideas? There is an option to point it to a driver disk, not sure if I need to get the driver from somewhere and do that or not?
machine is Dell Optiplex 760
CD RW\DVD RW drive

Try changing the SATA mode in the BIOS to AHCI.

Installing Windows Server and Linux on a hyper-v

Scott Alan Miller wrote:
But we have lots of Windows too.
That allow the sunlight into your office?! :)

Are you allowed to install Linux in a hyper-v on the same hardware as a Windows server? Also, would there be any issues to crop up? I am curious because I want to put Windows Server 2012 on one VM, Exchange on another VM, and then a Linux Server on another VM all on the same physical hardware. Windows Server 2012 Hyper-V would be hosting them all. The reason for the Linux Server is to use it for anti-virus or spam etc. and Linux is a free OS. I am curious though how it will jive with a Windows domain as well as being on the same machine as a hosted VM.
This topic first appeared in the Spiceworks Community

Installed MacMini server and can't see hard drive on wireless printer

Hi, all, I installed a MacMini 10.6 server on Tuesday and am having an issue communicating with my printer. We have a wireless office and have a Toshiba printer and scanner connected to a wireless bridge which is then connected to our Airport Extreme. The set up has been very efficient for our small group.
Before the server was installed and connected via CAT5 cable to the Airport we were able to scan using our printer and see the stored files on the printers built in hard drive. But since the server was installed, we can print, but we can't see the hard drive on the printer.
What do I need to do in order to see that hard drive again?
Thanks
Ron

If you want to try to replace it yourself, [iFixit has good repair guides|http://www.ifixit.com/Guide/Repair/MacBook-Air-Hard-Drive-Replacement/86 0/1].
As I take the parts out, I tape them to a piece of paper with clear packaging tape and write the step number (and screw color from guide) next to them. Making sure you've got the correct tiny screw in the right place is a bugger without doing that.

How do we install LDAP server and configure ?..

How to configure LDAP server...

You'll have more luck in the forum for LDAP: Oracle Unified Directory (OUD) & Oracle Directory Server Enterprise Edition/Sun DSEE
I suggest that you also include more information in your posts about what you've already tried to do and why it doesn't seem to be working. Simply asking "how to configure LDAP" isn't going to elicit many responses....You need to show you've actually attempted it yourself.
Also, you'll always want to include the versions of the software you're using.

Installing RADIUS server and Snap-Ins

Similar Messages

Maybe you are looking for