Installing Repository for Developer Suite 10 G2: Import aborted.

Hi,
I've created a user for the repository and made all the grants.
The datafiles are 1,2 Gigabytes.
I select small install.
Then there is an import starting, but it stops after 2 tables:
******************************* Quote *****************************************
export file created by EXPORT:V09.02.00
Warning : Objects were exported by CORE4012, and not by you
import WE8MSWIN1252 NCHAR AL16UTF16
. Importing objects CORE4012 into REPDES2
. . Importing table "CK_INSTALLED_OBJECTS" 7800 lines imported
es <
. . Importing table "CK_PRODUCT_ELEMENTS" 545 lines imported
es <
*********************************End Quote************************************
I must have missed a step, but I can't find help about the Repository user.
Many thanks if you can help.

Hi Jean,
You should post this thread to Oracle Designer :
Designer
However , i advise you to follow up the automatic config of Designer Repository instead of manual ......
Greetings,
Simon

Similar Messages

Problem installing Oracle Internet Developer Suite 1.0.2.4.1 (Forms & Reports 6i)

Hi all,
I am unable to install Oracle Internet Developer Suite 1.0.2.4.1 - specifically Forms & Reports 6i, Designer, Discoverer (ALL Products on Quick Install option on Windows 98 system). The installation proceeds to Install screen when the various files start to load ... Then the whole process stops after showing 100% load (sometimes the screen freezes, sometimes I get error message - illegal instruction etc) when the following file is being loaded :
Extracting ... ewt_swingaccessbridge.jar
I have another question :
I have Personal Oracle 8i (8.1.7) installed on D:\Oracle\Ora81 already.
During the install process (before I get the above error message) the 8.1.7 RSF-based product install location screen presents itself with the option to create a new Oracle Home and location (The preferred Oracle Home name iDSData and preferred Oracle Home Location D:\ORACLE\iDSData are already entered in the boxes) or Select an existing ORACLE_HOME. My existing ORACLE_HOME is
D:\Oracle\Ora81. What am I supposed to do at this point ? The installation guide is not explicit. Any help with these topics will be greatly appreciated.
I will be greatly obliged to anyone who can assist me with installing Forms & Reports 6i. Many thanks in advance.
Sincerely,
Partha Sur
[email protected]

Had the same problem too. It won't install in the same directory as your database. You need to create a new directory on your hard drive and have it installed there. Worked for me.
Regards,
LP

Appropriate windows platform for developer suit 10g release 2

hi
i've installed developer suit 10g on windows xp sp2 but it does not work properly
can anyone tell me which is appropriate windows platform for developer suit 10g release 2
thank U

Hello,
another solution : edit the file cauprefs.ora in ORACLE_HOME and modify the following values :
Reports.root_ht = 480
Reports.root_max = No
Reports.root_wd = 640
Reports.root_x = 0
Reports.root_y = 0
Regards

Problem installing Oracle 9i developer suite

Hi Friends,
I have problem in installing Oracle 9i Developer suite downloaded from Oracle website. When I am installing I get this error
Unable to find product oracle.swd.jre[1.1.8.1.2] in Oracle inventory.
Later on I get this error
Error writing to file C:\oracle\product\bin\ociw32.dll
and another couple of such errors.
Can anyone guide me regarding this installation it would be of gr8 help.
Thanks a lot for your help.
Manju

Had the same problem too. It won't install in the same directory as your database. You need to create a new directory on your hard drive and have it installed there. Worked for me.
Regards,
LP

Newbie - do you install repository for the metadata with the weblogic?

Hi,
I installed the weblogic 10.3.2 and didn't come at the point where I install/configure a db repository for the medadata?
Could someone clarify this metadata repository piece for me please? Is it required?
Thank you
Anatoliy

Yes, by default Weblogic Server DO NOT need any RCU (Repository creation utility) to download or install. On WLS you can deploy any J2EE applications developed with Eclipse IDE or JDeveloper. If you want to use any Fusion middleware components and develop Fusion applications then you need this RCU installed and configured. Some components of Fusion are like SOA, WebCenter, IdentityManagement, SingleSignOn, WebCenter Portlets etc
1. If you use FusionMiddleware or SOA Suite, it is required to install RCU.
2. RCU is nothing but database scripts to create tables ets to store information for SOA/BPEL stuff.
http://download.oracle.com/docs/cd/E12839_01/doc.1111/e14259/toc.htm
HTH
Ravi Jegga

Error while installing oracle 10g developer suite on windows xp

I am getting following error when i am trying to install the oracle 10g developer suite windows xp with sp3
+*"---------------------------*+
Oracle Universal Installer+
---------------------------+
Error in writing to directory c:\TEMP\OraInstall2010-03-18_12-57-52PM. Please ensure that this directory is writable and has atleast 55 MB of disk space. Installation cannot continue."+
Even i have enough space of my C drive plus i m the administrator on my PC. I changed the temp location as well and download the zip files(installation) again but it doesn't work. Kindly provide some solution for this error.

Error Code: 502 Proxy Error. The ISA Server denied the specified Uniform Resource Locator (URL). (12202) This means you already have ISA configured as proxy server. Disable the proxy from the browser and you should be able to access the application. Or simply add the application URL to the list of the proxy exceptions.

Problem installing Oracle 9i Developer Suite 9.0.2.0.1

I hope somebody maybe able to assist me. I am in the process of installing the aforementioned developer's suite with my existing oracle 9i database so that I can experiment from home.
For some reason when I try and install the developer's suite on my PC (Windows XP) and choose any of the options I get the following message: "Oracle9iAS cannot be installed in an existing Oracle 9i 9.2.0.1.0 or higher Oracle Home".
What version of the developer's suite am I supposed to download? Or what am doing wrong.
If someone could help that would be much appreciated.

Had the same problem too. It won't install in the same directory as your database. You need to create a new directory on your hard drive and have it installed there. Worked for me.
Regards,
LP

Problem - Installing oracle 10G & Developer Suite

Dear Team
I am trying to install Developer Suite and Oracle 10g . but unable to get into Sql. always i am getting a error . where as i changed everything in tnsnames.ora and checked the Listner. In Oracle 9i i dont get the error and very somoothly i can install and configure it . here some times it gives a error as Account Locked etc.,
Please advice how to configure or where I am doing a mistake
Sanjay

Few more details about how you are connecting and which user you are using for connection would be helpful.
With Oracle 10g, assuming that you have created a sample database on the same machine with mostly DBCA...
here some times it gives a error as Account Locked etc.,if you are referring to ORA-28000 error, then it seems the password that you have been using is incorrect and you have exceeded the failed login attempts.
Or you need to unlock the user in first place, since that is locked by default during Oracle installation (assuming you are referring to the sample schemas).

Install of NI Developer Suite 2010 hangs at inserting DVD 2

I am trying to install NI Developer suite 2010 DS2 on my home PC, upgrading from 8.6. When it comes to the point where I need to insert the DVD #2, it hangs. Wont let me rescan drive, cancel or close the window. Only way out I've found is a restart of XP. I picked the automatic component selection based on my license. How do I get past this?

Yes, I tried the install three times from the DVD with a restart and inserting the DVD into the drive. I could not exit or close the installer nor the window that was asking to insert DVD #2 in any way other than a restart. I tried all three DVD's and an empty DVD tray in every combination. Typically I would get an explorer window of the DVD root directory at the DVD insertion. The explorer window title would have the correct DVD number.
I am not sure where in the process it stopped, but it did get far enough that I could start LabView, so I activated it.
I didn't think it was significant at the time, but I also could not get past the part of the instalation where it checks for updates before actually installing anything without unchecking the box for it to do this check. I gave it 30 to 45 minutes without success the first time and unchecked the box every other time I started the install.

Urgent!! Deploy reports for Developer suite 10g (Newbie)

Hi All,
I've generated few jsp report using report builder from developer suite 10g. I know in the developer suite 9i. I just copy these jsp files under \reports\j2ee\web. Then start OC4J Instance, and type in from browser as http://localhost:8888/reports/testreport.jsp?userid=username/password@dbconnection. However, it doesn't work for 10g. Is there any different in deploy report for 10g? Please help....
Thanks,
Best Regards,

Andy,
It's impossible to help us if you doesn't specify what error messages you get?
If I should take a guess, you're using the wrong port number. Did you check if it's correct before posting your message? Most Developer Suite 10g installations comes with port number 8889.
Regards,
Martin Malmstrom

Download link for Developer Suite 10g 10.1.2 for Windows not working

I cannot download Oracle Developer Suite 10g 10.1.2 for Windows. The link redirects to the Application Server download page following the license agreement.

I downloaded it a few minutes ago and it opens ok.
But the file size is 671 825 075 instead of the (626,122,752 bytes) written on the DS 10g for Windows page.

Integrate Forms and Reports for Developer Suite 10g

Hi all,
One of my client is moving to Developer Suite 10g R2. Currently he is using Version 6i. I've converted the forms into 10g. Only one problem being faced by me is Reports. Our form which used
to call the reports was using Run_Product. Now, I've changed the functionality to Run_Report_Object. The problem is i need to create a report node in the form for every report. I've 200 reports. If there is any
way, where i can add the report node in the form module dynamically, this will reduce my work to a greater extent.
Regards,
Alok Dubey

hello,
It is quite easy to add a report node using the JDAPI.
1) Put all the forms in a directory.
2) Find the JDAPI example in the online help.
3) Modify it in order to have the functionality: add report item
4) IF you are certain there are no report nodes already attached, you don't need to loop through your form module in order to check for existing report nodes.
If you are not tempted to write your own routine, you can use francois degrelle'S own JDAPI batch process.

Tnsnames.ora error when installing oracle 9i developer suite

Hi,
Can anyone answer this question: I recently installed
oracle 9i and i'm getting a tnsnames.ora error when connecting to the database. Can anyone tell me what parameters to modify in the tnsnames.ora and sqlnet.ora files and what values to put in these parameters. Also,
i'm trying to create a net_service_name in oracle net manager(in configuration/management tools) and I can't figure out the service name for versions of Oracle 8i or later. Can someone tell me what this is because the program is asking for a service name. I need this info
for connecting to the database by username/password@net_service_name. Please respond soon.
Thank you.
T. Patel

Go Net8Assistant. Follow the tree Net8Config ->Local -> Service Naming. In this node you will find all instances set (SIDs) and by clicking on them you will see in the right hand part of the screen if they were set or not in tnsnames.ora.
Another way: Usually the database service name is OracleServiceSID. Go Control Panel -> Administrative Tools -> Services and check out the Oracle Service name. Take the SID from there to tnsnames.ora.
You should have write down the name you was asked for while you were installing Oracle (or the default name that the installer put for you).
Hope this will help you
Alexandra

Installating Oracle 10g Developer Suite (most urgent)

Dear All,
I have downloaded ORacle IDS 10g from Oracle web site and tring to install on my win2003 Server.
when i click Setup.exe file it give me error message 'Fatal Error'
pl.give me an prior to installation instruction that i follow,
regards

First, make sure your media is not corrupt.
Next, there are some pre-installation task you must check. Some good advices can be found at www1.tyict.vtc.edu.hk/freddy/DEVELOPER10g_NOTES/OracleDeveloperSuite10gR2InstallWin2003Server.doc.
Which is a document based on the official oracle installation guide http://download-west.oracle.com/docs/cd/B25016_06/doc/dl/core/B16012_03/toc.htm

Problems installing repository

Hi,
I am trying to install the repository for developer suite 9.0.2.0.1 and have encountered a problem when tring to run the ckcreate.sql script.
When running the script the following error occurs.....
Creating REPOS_TEMP tablespace ....
create tablespace REPOS_TEMP
ERROR at line 1:
ORA-12913: Cannot create dictionary managed tablespace
The script I am running is vanilla as supplied. Below is the code that causes the error..........
prompt
prompt Creating &TEMPTBLSPACE tablespace ....
create tablespace &TEMPTBLSPACE
datafile '&TEMPFILENAME' size &TEMPFILESIZE temporary;
Can anyone help ???
TIA.
Aaron

ORA-12913 cannot create dictionary tablespace
when i wrote
create tablespace jitesh
datafile 'c:\oracle\oradata\oracle9i\jitesh01.dbf' size 100m
extent management dictionary
default storage (initial 1m next 1m pctincrease 0 )
sql :>
create tablespace jitesh
ERROR at line 1:
ORA-12913: Cannot create dictionary managed tablespace
plese solve my query
Message was edited by:
nitesh piyaranjan

Installing Repository for Developer Suite 10 G2: Import aborted.

Similar Messages

Maybe you are looking for