Installing repository will not recognize privileges granted!

I am trying to get the repository installed so I can install the designer. The environment is Windows 2000 Professional. Stand alone database, version 9.2.0.1.0 with two databases: wcstest and oemrep.
To install the Designer, it says to run the Repository Administration Utility. When I check the requirements the following privets are not checked:
Required object privileges
     execute on dbms_lock
     execute on dbms_pipe
Required System privileges
     create any synonym
     drop any synonym
I can run the scripts to grant the privileges and verify that the changes have been made from sql*plus. The Utility refuses to see the changes. Why?
My stand alone database is in OracleHome92 and the Development suite is in OraHome901.
Why can't the utility see the grants that have been made?
Thanks!
Bill

Have you created public synonyms

Similar Messages

  • Newly installed CS2 will not recognize raw images

    I have installed my Photoshop CS2 on my new computer.  It will not recognize my raw images.  I get a message that says "could not complete your request because it is not the right kind of document".  I uninstalled the program and reinstalled it again but I am still getting the same message.  I have also registered it with my serial number, but every time I get into the program I get a prompt telling me I need to register.

    I have installed my Photoshop CS2 on my new computer.  It will not recognize my raw images.
    Camera Raw plug-in | Supported cameras
    Camera Raw-compatible Adobe applications
    I have also registered it with my serial number, but every time I get into the program I get a prompt telling me I need to register.
    You have permission or compatibility issues. CS2 was never meant to run on contemporary operating systems. Problems are to be expecrted. Run as admin , turn off security stuff, try compatibility modes...
    Mylenium

  • My itunes on my windows 8 will not recognize my ipod touch

    I have a new computer that runs windows 8.  My itunes is installed but will not recognize my ipod touch. Any suggestions?

    You want this link
    iOS: Device not recognized in iTunes for Windows
    I would start with:
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    Also
    If you  have iTunes 11 turn on the Sidebar. Go to iTunes>View and click on Show Sidebar. You can also do a Crtl+S to show the sidebar. The sidebar is where Devices appears. and Control+B to show the Menu bar

  • My itunes will not recognize my ipod shuffle after installing Mcafee

    My itunes will not recognize my Ipod shuffle, I have tried almost everything Itunes has suggested including uninstalling and installing Itunes.  I am at a loss, the computer recognizes the ipod and assigns a drive to it.  When I click on the drive there are flies in it.  I have disabled the firewall, checked all firewall settings as suggested in previous forums.  I have tried deleting the temp files but that keeps getting hung up on a file that says it is in use.  I can stll use my ipod because it charges but I can not update songs etc.
    I contacted Mcafee but all they did was turn the firewall off (I could have done that myself).
    If there is any help I would appreciate it!
    Thanks,
    Nadine

    The first thing I did in the morning was contact McAfee they turned the firewall off it didnt work so they said it wasnt their problem.  I attempted several other things using ITunes help but none of the solutions worked.  I would say it is something in my computer but the drive shows up in my files so the computer is reading the USB port.  I tried changing the drive but that didnt help.
    I cannot find a universal "OFF switch" in McAfee But I have turned the firewall off several times after many different attempts.
    I do not find an area where I can tell Itunes where the Ipod is in Windows Explorer, that would be helpful at least it could try to locate it then. You would think this feature would be available since Itunes would like us to purchase music through them to load on our equipment.  Since my computer does not recognize my Ipod there is no need for me to purchase music.
    Do I sound frusturated - I AM But I appreciate your trying to help.

  • My mac had it's original software re-installed by Apple.  since they did this, my airbook pro will not recognize my iphone in Itunes, and I cannot update the latest version of itunes, because it says I'm not running the latest version mac software????

    I my macbook pro will not recognize my iphone.  I had the AppleStore, re-install my original software a month or two ago, but since they did this, my computer cannot recognize my Iphone  it is telling me that I also need to download the new version of Itunes, but keeps telling me my system isn't running the correct software.  When I go to update my software, it's telling me I'm running the latest version???  HELP!!

    you need to upgrade your OSX to 10.6.8 or later to sync with the iPhone 5. as you need itunes 10.7 to  run Iphone 5

  • System Profiler will not recognize installed hard drive if drive is in use by VMWare

    System Information will not recognize installed Hard Drive (Boot Camp) when in use by VMWare.
    I work in IT for a School District and I am creating a Script that system information about the computer. I am testing this on a Mac Pro with two internal hard drives. One drive is Mac OS 10.8 and the other drive is a Boot Camp Drive that is used by VMWare Fusion.
    When I run System Information via the GUI or system_profiler via Terminal, both drives show up just fine. However, if I launch VMWare Fusion and run Windows from my Boot Camp drive, then run System Information via the GUI or system_profiler via Terminal, the Boot Camp Drive is no longer listed as an installed drive.
    Example:
    In the Terminal, I enter the following command.
    system_profiler SPStorageDataType
    Then it returns this information.
    Storage:
        Lion Client:
          Available: 217.84 GB (217,836,306,432 bytes)
          Capacity: 639.28 GB (639,275,270,144 bytes)
          Mount Point: /
          File System: Journaled HFS+
          Writable: Yes
          Ignore Ownership: No
          BSD Name: disk0s2
          Volume UUID: CCB501BF-AF24-30E7-A938-5A4E52DF14D7
          Physical Drive:
              Media Name: WDC WD6400AAKS-41H2B0 Media
              Medium Type: Rotational
              Protocol: SATA
              Internal: Yes
              Partition Map Type: GPT (GUID Partition Table)
              S.M.A.R.T. Status: Verified
        BOOTCAMP:
          Available: 255.58 GB (255,575,560,192 bytes)
          Capacity: 319.79 GB (319,790,510,080 bytes)
          Mount Point: /Volumes/BOOTCAMP
          File System: NTFS
          Writable: No
          Ignore Ownership: Yes
          BSD Name: disk1s2
          Volume UUID: D4B39D4E-E244-403C-AE4D-4D58397130DE
          Physical Drive:
              Media Name: WDC WD6400AAKS-41H2B0 Media
              Medium Type: Rotational
              Protocol: SATA
              Internal: Yes
              Partition Map Type: GPT (GUID Partition Table)
              S.M.A.R.T. Status: Verified
    Then I launch VMWare, which uses the Boot Camp drive. The once again run the same command from the Terminal Command and I get this.
    Storage:
        Lion Client:
          Available: 213.39 GB (213,392,244,736 bytes)
          Capacity: 639.28 GB (639,275,270,144 bytes)
          Mount Point: /
          File System: Journaled HFS+
          Writable: Yes
          Ignore Ownership: No
          BSD Name: disk0s2
          Volume UUID: CCB501BF-AF24-30E7-A938-5A4E52DF14D7
          Physical Drive:
              Media Name: WDC WD6400AAKS-41H2B0 Media
              Medium Type: Rotational
              Protocol: SATA
              Internal: Yes
              Partition Map Type: GPT (GUID Partition Table)
              S.M.A.R.T. Status: Verified
    The Boot Camp Drive is no longer listed.
    I assume this is due to the the fact that the drive is "In Use" however is seems odd since the Mac drive is also in use and it appears without problem. I assume there is no "fix" for this, I was just wondering if someone may have an explaination why?
    Also, I do realize that I can query the various interface types like system_profiler SPSerialATADataType to get all the properly installed phycial drives, but then I would have to query all possible interface types, isolate only devices containing Volumes, then consoldate the information to just the information that I need. I was hoping for a cleaner query.

    Thank you for your response.
    VMWare may be the cause, but the actual issue I am having is with Apple's System Information. I anticipated resistance from VMWare if I went to them with a question about an Apple software issue (even though VMWare software is part of the equation). I was trying to avoid the inevitable finger pointing game. I thought I would try with Apple Forums first since the issues presents itself within the Apple Software. However, you are correct that VMWare may have an explanation on why Fusion might be interfering with System Information. I will check with them next.
    To answer your question. Yes, In most cases I do use Fusion to run Windows side-by-side with the Mac OS. However, that is not always the case. There are a few reasons why I have it setup using a Dual Boot configuration.
    One, in some cases, due to the intense programs I occasionally run (graphic applications), I prefer to simply boot straight into Windows via Boot Camp so I may allocate all hardware resources to Windows. Additionally, some graphic applications like to have direct access to hardware and the extra layer of the VM environment can cause problems when an application is trying to directly access specific hardware like a graphics card.
    Second, I often use either side, both Mac and PC, for testing. There is an advantage to not having to rely on the Mac OS to run Windows. If, for whatever reason, my Mac becomes unstable due to testing, I can still jump right into Windows to do work if necessary.
    Third, I love the Mac OS, but I work in a PC centric organization. If there is a "problem" with my system, it is too easy for other system admins to say, "it's because it's a Mac". Having the definitive separation of the OS's allows me to prove that the Mac OS is not a factor.

  • IMac 400dv will not recognize new hard drive installed

    Hi,
    I had been having trouble with my iMac 400dv's hard drive. I had posted the problems I was having and had gotten some very nice feedback. The final decision was to install a new hard drive and battery.
    I purchased a refurbished 40GB Maxtor to replace my old 20GB. Installation was no problem except that my iMac will not recognize the new drive. If I reinstall the old one, it recognizes it right away, so I know it has been installed correctly.
    I took the new hard drive back to the store and the tech said that it wasn't set on the "Master" position. He set it and tested the drive and said that it was fine. I reinstalled and get the same result, no drive can be sellected to install the software. No matter where I set the pin, I get the same result. I called the phone help line (MicroCenter) and the new tech told me that the drive was too big for my mac, which makes no sense to me since they suggested I buy a 100GB in the 1st place.
    I have 1GB of memory, my installation disk if for 8.6 and I will bring it up to 9.2 if I can get it running again.
    Any suggestions?
    thanks,
    Lucy

    Lucy Rust...
    In my opinion no Macintosh user should attempt to install a refurbished HD under any condition. Especially any HD that is to be bootable as they are no longer reliable for the Mac.
    Master setting is a must for the HD and never tinker with an optical setting. Well, if you could mess with the optical setting, expect to do some micro-surgery.
    You should be good for a HD up to a capacity of 120GB. The threshold is somewhere around 137GB but you will not find such odd capacity on the market.
    I think the rest has been covered.
    ...Ron

  • I installed itunes 10.5 and now it will not recognize my phone-

    I installed itunes 10.5 last week and now when I plug in my iPhone it will not recognize it.  I've gone through all the recommended troubleshooting through Apple's site but it seems to make my computer worse.  I re-installed itunes 3 times and it still will not find my phone when I plug it in.  When I go to my device manager my "Apply Mobile Device USB Driver" has the little Yellow Triangle with the exclamation point it in- I checked for and updated driver but it says I have the most current one.  I am running Windows Vista and itunes was working fine before I took the upgrade.  Any help is appreciated!
    Thanks!

    I spent last week looking for a solution to that little yellow "!" needle haystack....
    It is probably buried where nothing can touch or change it other than what I resorted to and would have saved time, clean install after I made sure to have two backup sets: Windows Easy Transfer plus Paragon clone OS and partitions to drive. Had to spend a full day reinstalling, updates, etc. Careful not to bring back any prefs or data that might be corrupt or wrong.
    10.5 and iOS 5 on new iPod 4G works much better though and as they should and no issues like I had with AMS or other services or needing to restart first before launching iTunes.

  • Firefox will not recognize java plugin that has been installed and worked 1 day ago.

    I have an IMac with OSX 10.5.8, Firefox 5.0, One day ago it worked fine, today when going to a specific site that requires Java, Firefox will not recognize that Java is installed. I checked for updates and there are none. Java is installed and the site works fine with Safari, which requires Java as well. How can i get Firefox to recognize Java installation.

    Apple has removed support for the Java Plugin2 with the latest Java Update 10 for OS X 10.5 Java version, so the Java plugin is no longer available for Firefox versions and other browsers like Google Chrome that require the Java Plugin2.
    The Java Plugin2 plugin is still there, but he softlink to it has been removed with this update, so Firefox doesn't find the plugin.
    There will be fix for this in the next release (Firefox 5.0.1 or 6), so that Firefox will find the plugin again.
    I don't know if all Java applets will still be working on OS X 10.5 with that JP2 plugin (Apple recommends updating to OS X 10.6 for OS X 10.5 users with an Intel Mac).
    * [/questions/844734]
    * [/forums/contributors/707078]

  • Trying to install Adobe 10Pro on new Windows 8.1 computer.  downloaded installer by it will not recognize my product key

    Trying to install Adobe 10Pro on new Windows 8.1 computer.  downloaded installer by it will not recognize my product key

    Adding to what Pat has mentioned, I can also see that you have the serial number for both Mac & Windows. I hope you are using the correct key for the platform where in you are installing the product as that could be the only reason. Please check the keys once again and use the correct one and that should solve the concern.

  • After installing osx 10.8.2 to my mac mini it will not recognize my admin account. how do i uninstall

    after installing osx 10.8.2 to my mac mini it will not recognize my admin account. how do i uninstall

    If 10.7.0 or later...
    Bootup holding CMD+r, or the Option/alt key to boot from the Restore partition & use Disk Utility from there to Repair the Disk, then Repair Permissions.
    If that doesn't help Reinstall the OS.

  • I am trying to install my adobe acrobat XI Pro, but after i go thru the installation process, i get a message saying my free trial has ended, the system will not recognize my new product.

    i am trying to install my adobe acrobat XI Pro, but after i go thru the installation process, i get a message saying my free trial has ended, the system will not recognize my new product.

    Moved to Acrobat Installation & Update Issues

  • BIOS will not recognize installed CD/DVDs

    System set up auto search does not recognize installed CD players or DVD RW on IDE 2 as being present. I have installed several different units that I know are working and set up passes by them like they are not present. I have checked and replaced all cables. CD unit are getting power and will light up, open and close but they do not show up during set up nor on Windows hardware listing. I have reset CMOS with no success.
    I have the most current version of BIOS for this M/B. This problem started recently when I tried to change my CD player.
    1.   Product Type:  645 Ultra (m-6547 V1.X) ATX Mainboard
    2.   BIOS Version. 3.31
    3.   External VGA Type: None
    4.   CPU Type:  P4 2.40 GHz
    5.   Memory Type: 1.00 GB
    6.   Power Supply Type:  A Power 400 watts
    7.   Operating System:  Windows XP Pro with SP2

    I connected a second hard drive on IDE 2 and the BIOS failed to recognize it. I also connectted a CD to IDE 1 along with my primary hard drive and the BIOS DID recognize both my hard drive and the CD but the system would not boot up under that configuration. I have uninstalled and re-installed the controller for IDE 2 and the system still will NOT recognize anything connected to the IDE 2. The only other thing I can think of is to reinstall the BIOS. Anybody have any other suggestions on how to deal with a non-functioning IDE 2?

  • Question why In the final phase of installing OSX it will not recognize my password

    Why in the final phase of installing OSX Maverick it will not recognize my password?

    Administrator account password.

  • Since I installed the last Mavericks update, my MacBook Pro will not recognize my Nook ebook reader

    Since I installed the last Mavericks update, OS 10.9.2, my MacBook Pro will not recognize my Nook ebook reader.  Maybe it's a coincidence; maybe not.  Any ideas?

    Check the Barnes & Noble or Nook websites to see if there are any Nook driver or software updates for OS X Mavericks.

Maybe you are looking for