Installing RSTE after install of Windows 7 Ultimate

I have the HP H9-1170T Desktop PC . This unit shipped with a Hitachi 1.5TB HD as the C drive, with GPT configuration and the OS on one partition, the recovery partition separate, and another partition for GPT. It was running OEM Windows 7 Home Premium. The device configuration was set at RAID.
I installed Windows 7 Ultimate 64 bit with a 250GB WD Velociraptor as my C: Drive.
I had a lot of trouble installing the operating system until I read up on UEFI and the Device Configurations.
It took me 1 1/2 days to figure out the solution
The install would halt at the cd drivers and ask for the disk. So I went into the BIOS and changed the device configuration for SATA from RAID to AHCI and the install continued without problems.
I have downloaded HP SP59479 - Intel Rapid Storage Technology Driver (RSTE). IF I try to install this update, the system comes back and tells me "Your system does not meet the minimum requirements for installation."
How can this be, when it came shipped with this installed and running?
I don't believe that a UEFI partition with GPT is a requirement.
At least it doesn't appear so based on Intel's Specs.

I don't like your attitude.
First of all, I am not a "you people."
Second of all, I don't work for HP, so don't take your frustrations out on me!
If you choose to trifle with your PC when you don't know what you're doing, that isn't my problem. It's YOURS!
The original question you asked was why you couldn't install the RST driver, and I explained that to you.
Not at any time until you blew your stack, did you state that you wanted to run W7 in RAID mode.
Had you asked that question originally, it would have saved us time, frustration and not resulted in this animosity.
To install Windows 7 in RAID mode on your PC, you need to download and extract the Intel X79 chipset SATA Raid drivers onto a USB flash drive.
In order to do that, download the file at the link below.
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=cp-111117-1&cc=us&dlc=en&lc=en...=
Use the free 7-zip file utility to extract the files from the exe.
http://7-zip.org/
Open the src folder, and then open the x64 folder. Copy the contents of the x64 folder (without the folder) onto your usb flash drive.
Then you need to go into the BIOS and change the storage controller setting from AHCI to RAID. Save the setting.
Then, you need to boot from the W7 installation disk, select the advanced installation options, and select the option to install a SATA/RAID driver. Have your USB flash drive plugged into a usb port.
You should then see the correct driver appear on your usb flash drive, if you leave the box checked to only inlcude compatible drivers. The driver it should be indicating is the right one would be the Intel(R) C600 Series Chipset SATA RAID Controller.
Windows 7 should install in RAID mode, and you can live happily ever after.

Similar Messages

Adobe Reader V9.0 will not install on Windows Vista Ultimate SP1

I have Windows Vista Ultimate Build 6001 and tried to install adobe reader V9.0. The download was fine but when I run the program (AdbeRdr90_en_US.exe) it returns the error:
"NOSSO (R) has stopped working
A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available
Close program"
So I guess my questions are
1. Is there a version of adobe reader that will install on windows vista ultimate SP1?
or
2. Is there another pdf reader that will work with Vista Ultimate SP1?
Thanks for any and all assistance!!
Mark

I am getting the exact same error:
I have a brand new HP xw8600 systems with 64 bit Vista Ultimate installed.
Via google I found a suggestion to turn on user account control.
I went to control panel > User Account > Turn User Account Control
checked the box and restarted the system. I ran the install as the administrator. It was a minor improvement. Instead of the error coming up immediately like it was, I got the OS confirmation asking if I wanted to install the program. I got the failure right have selecting "yes"
Running out of clues... any help?

Oracle 10g install on Windows Vista Ultimate

Basic question on whether Oracle 10g can be installed on Windows Vista Ultimate. Any link suggesting the same will be appreciated.
Regards,
Kaz

I have installed Oracle Database 10gR2 Enterprise Edition on Vista Business Premium and run it with no issues.
Suggestion is to download the 'for Vista' version (http://download.oracle.com) and read the install manual (http://tahiti.oracle.com) before installing. The read the Platform Guide for Windows to follow-up management techniques.

I cannot connect to the Internet after installation of Windows Vista Ultimate edition.

I cannot connect to the Internet after installation of Windows Vista Ultimate edition. For some odd reason, it seems my ethernet has not yet been installed to my operating system and I do not know how to do that even with the internet, I have the LAN cable hooked up to my computer but I do not know exactly what to do about it. Is there some sort of driver I need to install, or what? How do I do that without the internet?
This operating system is on a separate partition to my other operating system that is connected to internet already (Windows Vista Premium) that I do not wish to use anymore because of it's corruption. I tell you this because you may know a way of finding the driver files on my previous operating system that I may be able to transfer to the other.

In order to avoid board clutter, we ask that you post your topic on one board only.
Please look ---> HERE for replies to your topic. Thank you.
If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer that solved your issue as the accepted solution.

Installing AUTHENTIC windows 7 ultimate 64bit on Macbook Pro - ERROR, help!

I am trying to install windows 7 ultimate 64bit (not the beta or RC, this is an authentic windows 7 DVD -- signature edition) on my macbook pro using Bootcamp. When the computer tries to reboot, i get a message that says:
1.
2.
select cd-rom boot type:"
I saw forum posts with this problem where people were using improperly burned windows 7 versions, however, this is not a burned DVD -- its authentic from microsoft. This means i cant reburn the dvd...
Any suggestions?!

Did you by any chance install Snow Leopard on your MacBook Pro?
My MacBook Pro was working perfectly fine. Installed windows many times the last 2-3 years and never had problems.
I installed Snow Leopard a couple weeks ago and since then I get this exact same error with all my Windows Install discs (ones that always worked before!).
Whatever I do. I can't get any Windows installed anymore.
The discs are fine, Bootcamp menu reads it and recognise it. But the moment you try boot from it you end up with the error the OP is describing!
And all this, after I installed Snow Leopard. Restoring to previous versions of MacOSX did not help!
So it seems that the Snow Leopard installation does something to the DVD drives on the MacBook Pro's (upgrading firmware whatever) and now it's ruined!!

CS4 Suite fails to install on Windows 7 Ultimate 64-bit

I just built my Intel i7-980x Workstation with 12gigs of ram a PNY Quadro FX3800 GPU and a 160 SSD. I installed Windows 7 Ultimate 64 bit OS. I then began installing my CS4 Production Premium Sutie onto my new Workstation, but the install, after the 4th disk, displayed and error message that said "Done, but with errors." I can't load the screen shot since Adobe won't allow attachments. I called TS, but they couldn't help. I then look on this forum and found people having the same "Language packages" not installing on their XP/Vista machines. So after turning off the firewall with no anti-virus it still would not install correctly. Funny thing was I could launch Pr, Ae and Soundbooth, but not Ps, Ai or Fl. I went to the Windows 7 website to see about the "Public" folder and this location http://windows.microsoft.com/en-US/windows-vista/Sharing-files-with-the-Public-folder shows you how to turn it back on as Win7 disables it; at least the Ultimate version does. I attempted the install for the 4th time (I removed it every time prior to the next try) it finally worked. Tech support needs to be on top of these things, but thank God for this forum and people sharing their experiences. Hope this helps someone else

Ankit: you should really use code blocks when giving typing or copy/paste instructions. This forum software keeps inserting random blanks and/or linefeeds into normal text, so when the user copied your instructions, the blanks were copied as well; thus the command failed.
Example:
Download Microsoft's SubinACL tool from http://www.microsoft.com/downloads/details.aspx?FamilyID=e8ba3e56-d8fe -4a91-93cf-ed6985e3927b&displaylang=en
Install the same by double clicking on the "subinacl.msi" just downloaded.
Open Command Prompt window through the Run Dialog Box (Start -> type "cmd". In the section above you should be able to see a command.exe. Right click on the same and select Run As Administrator)
In the Command Prompt window, type in the following commands:
cd /d "%ProgramFiles%\Windows Resource Kits\Tools"
subinacl /subkeyreg HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Microsoft\Windows\CurrentVersion\Run\OptionalComponents /grant=administrators=f /grant=SYSTEM=f /grant=USERS=f /grant="Creator Owner"=f
The 'i' and 'ii' in the list above will probably be replaced by the forum software by something else (possibly 'a' and 'b') when I click the Post button.

Clean install of Windows 7 Ultimate 64-bit on Qosmio X870

When I received my laptop (Qosmio x870) I immediately uninstalled its OS since it was filled with bloatware and installed a clean version of windows 7 ultimate 64 bit. After my install I have been trying to install the drivers on my laptop, but some don't seem to be working.
My VGA driver has installed, but the windows experience index for my graphics is 5.5 which is much lower than it should be (if memory serves right it was 7.4 before I uninstalled the original bloated O.S). However, the biggest problem I have come across is the Network driver. I have installed every single network driver on Toshiba's driver page for the qosmio x870, but none seem to work. For some reason the laptop thinks my wifi is turned off, which I know is not (unless there is a setting in bios which should be changed otherwise I really don't know).
I really need some help here guys, if someone can point me to the EXACT drivers I absolutely need it would mean the world to me. Toshiba should really have a bundle of essential drivers, like most other computer companies have, it makes everything so much easier for people who hate the bloated O.S that comes with their laptop.

I found a driver installation list for X870 and this installation order is required:
Win 7
Intel Chipset SW Installation Utility 9.3.0.1020
Intel Management Engine Interface 8.0.3.1427
Intel Display Driver 8.15.10.2712
or
Intel Display Driver 8.15.10.2712
NVIDIA Display Driver 8.17.12.9555
or
NVIDIA Display Driver 8.17.12.9631 for 3D model
Intel Rapid Storage Technology Driver 11.0.0.1032
Realtek Audio Driver 6.0.1.6581
NVIDIA HD Audio Driver 1.3.9.0
SRS Premium Sound 3D 1.12.1100
Synaptics Touch Pad Driver 15.3.41.7
Atheros LAN Driver 2.0.12.13
Intel Wireless LAN Driver 15.0.1.1.0.s64
Intel Wireless Display 3.0.12.0
or
Realtek Wireless LAN Driver 1005.24.0712.2011|2002.2.0110.2012
or
Atheros Wireless LAN Driver 9.2.0.462.1.
Intel Proset 15.0.0.0.3
Realtek Bluetooth Filter Driver Package v2.3.9.0206.2012
Atheros Bluetooth Filter Driver Package v1.0.12
Bluetooth Stack for Windows by Toshiba v9.00.00T
Intel USB3.0 Driver 1.0.4.220
Realtek Card Reader 6.1.7601.29006
Nuvoton CIR Driver 8.1.64.1009
YUAN DVB-T/ATSC Tuner Driver 6.0.111.16
TOSHIBA Supervisor Password Utility v2.1.0.3
TOSHIBA HW Setup Utility v2.1.0.8
TOSHIBA Fingerprint Utility V1.0.3.54
TOSHIBA Value Added Package 1.6.0022.640207
HDMI Control Manager 2.0.2.1.64B
TOSHIBA Web Camera Application V2.0.3.33
TOSHIBA Remote Control Manager 3.0.1010.1 [For 3D button]
PatchFiles TosVolRegulator_1.1

HP Scanjet g4050 software does not install under Windows 7 ultimate

Hello
During installation of the full software the file scan.msi is "not found", although it is present in the directory.
What is wrong with this file? Tried the installation several times
Installation file: setup_full_G4050_14-5.exe, downloaded from the HP support site
OS Name: Microsoft Windows 7 Ultimate
Version: 6.1.7600 Build 7600
regards
Ab
This question was solved.
View Solution.

Try running Microsoft's program uninstall and install troubleshooter. Post your results here please. Here is a link to the Microsoft web page that explains the troubleshooter's function.
You can also download the full software package via an FTP interface.
Best regards,
erico
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Error instalation in Windows 7 Ultimate

Hi everyone, how are you?!
I'm trying to install Ovi Suite in my computer but I can't because there is an error during the process.
I use Windows 7 Ultimate - 64 bits.
I checked compatibility with my computer and its attend all the minimum requires to install.
'Please....could you help me?!?!
Thanks in advance.
Attachments:
Error - windows 7 ultimate.png ‏29 KB

Step1 : Most of the installation issues are fixed by reinstalling the Windows Installer.
http://support.microsoft.com/kb/555175
Step 2: If Step 1, does nt work. You could try these
Navigate to C:/program data/OviSuite Installer Cache Remove all the subfolders from there.
Step 3: If it still does nt work then download the MSI clean up utility (provided in this post, save it as exe and then install it) Click and remove anything which is related to nokia.
Hopefully it works
Cheers
Show appreciation by clicking the kudos star :-), or gesture by typing thanks
Attachments:
msicuu2.txt ‏352 KB

Frame 7.2 will not install under Windows 7 Ultimate

HELP: FrameMake2 7.2 does not install under Windows 7. Almost at the end of the install it crashes with an empty dialogbox and a warning. Nothing else.
Any one seen this,
Keep smiling
Thomas

For more info on running things in compatibility mode, these links should help:
http://windows.microsoft.com/en-us/windows-vista/Make-older-programs-run-in-this-version-o f-Windows
http://www.sevenforums.com/tutorials/316-compatibility-mode.html
There's also a free "XP" add-on that runs apps in a virtual mode with Win7. See:
http://www.microsoft.com/windows/virtual-pc/download.aspx
There's also another freebie virtual-machine that will allow you to run most older apps available at:
http://www.virtualbox.org/

Re: NB200-134 - FN key not working after upgrade to Windows 7 Ultimate

My FN keys of NB200-134 is not working after upgrading from Windows 7 starter to Windows 7 ultimate. I tried installing every drivers found on Toshiba website for my lappy but still it does not work.
Help please

Hi asalamk,
The FN keys are controlled by Value Added Package and Flash Cards Support Utility. I think you have forgotten to install these tools
You should check the Toshiba page again and download both tools. Start with installation of Value Added Package then restart your notebook. After this install Flash Cards Support Utility. Once again restart and all FN keys should work properly now.

BootCamp fails after installation of Windows 7 Ultimate 64bit

So guys , as we know loads of people had same issue i been searching it for whole day and couldnt get any answer. First i have installed Windows XP home 32bit sp3 whole computer worked like charm. Today i have deleted xp did re partition installed Windows 7 Ultimate 64bit success but for some reason there is not Sound. no iSight and no wifi red light on sound jack. and boot camp is not working.Really can some1 help ?

thanks for replay but i dont have 3.0 i have 3.1 allready in DVD
btw : i forgot to say i have installed Nvidia remotely but not starting with windows and i did everything that i can to install but i will uninstall bootcamp and will download 3.0 then 3.1 as you said.
Thanks
Message was edited by: Mamuq

Lenovo L520 Looping after upgrade of windows 7 ultimate

I have upgraded my Lenovo L520 to Windows 7 ultimate after I had to change a faulty HDD all seemed to load ok onto the new seagate HDD from USB device downloaded from www.royaltechsavers.com.
However when you turn the laptop on you just get Lenovo page saying press enter to enter bios and this keeps repeating (Looping)

Thanks for your reply. Have resolved the problem. I took the hard drive out and formatted it back to a blank drive and reloaded windows. However have downloaded all the drivers but cant get the internal Wi-Fi working light is showing on the laptop. I have to use an external adapter to receive any signals

After re-inistalling windows 7 ultimate the validation process fails and reports error code 0xC004E003

Hi I have just reinstalled Win 7 Ultimate and the validation has failed due to error code 0xC004E003. all of the windows updates have been complete.
when I run slui 4 and I do not get an option to activate by phone and I have tried running the Command prompt "cscript %windir%\System32\slmgr.vbs /ilc %windir%\System32\licensing\ppdlic\Security-Licensing-SLC-ppdlic.xrm-ms" which errored
out
Bellow is the MGADiag tool output
Diagnostic Report (1.9.0027.0):
Windows Validation Data-->
Validation Code: 0
Cached Online Validation Code: 0x0
Windows Product Key: *****-*****-X92GV-V7DCV-P4K27
Windows Product Key Hash: aU2z1/fnhnLHmhBm699qYZT2E6s=
Windows Product ID: 00426-OEM-8992662-00400
Windows Product ID Type: 2
Windows License Type: OEM SLP
Windows OS version: 6.1.7601.2.00010100.1.0.001
ID: {58492533-DAC0-4F4B-8CB4-7C2572CD6AD2}(3)
Is Admin: Yes
TestCab: 0x0
LegitcheckControl ActiveX: N/A, hr = 0x80070002
Signed By: N/A, hr = 0x80070002
Product Name: Windows 7 Ultimate
Architecture: 0x00000009
Build lab: 7601.win7sp1_gdr.130828-1532
TTS Error:
Validation Diagnostic:
Resolution Status: N/A
Vista WgaER Data-->
ThreatID(s): N/A, hr = 0x80070002
Version: N/A, hr = 0x80070002
Windows XP Notifications Data-->
Cached Result: N/A, hr = 0x80070002
File Exists: No
Version: N/A, hr = 0x80070002
WgaTray.exe Signed By: N/A, hr = 0x80070002
WgaLogon.dll Signed By: N/A, hr = 0x80070002
OGA Notifications Data-->
Cached Result: N/A, hr = 0x80070002
Version: N/A, hr = 0x80070002
OGAExec.exe Signed By: N/A, hr = 0x80070002
OGAAddin.dll Signed By: N/A, hr = 0x80070002
OGA Data-->
Office Status: 109 N/A
OGA Version: N/A, 0x80070002
Signed By: N/A, hr = 0x80070002
Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3
Browser Data-->
Proxy settings: N/A
User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
Default Browser: C:\Program Files (x86)\Mozilla Firefox\firefox.exe
Download signed ActiveX controls: Prompt
Download unsigned ActiveX controls: Disabled
Run ActiveX controls and plug-ins: Allowed
Initialize and script ActiveX controls not marked as safe: Disabled
Allow scripting of Internet Explorer Webbrowser control: Disabled
Active scripting: Allowed
Script ActiveX controls marked as safe for scripting: Allowed
File Scan Data-->
Other data-->
Office Details: <GenuineResults><MachineData><UGUID>{58492533-DAC0-4F4B-8CB4-7C2572CD6AD2}</UGUID><Version>1.9.0027.0</Version><OS>6.1.7601.2.00010100.1.0.001</OS><Architecture>x64</Architecture><PKey>*****-*****-*****-*****-P4K27</PKey><PID>00426-OEM-8992662-00400</PID><PIDType>2</PIDType><SID>S-1-5-21-3905371182-2698555194-554347162</SID><SYSTEM><Manufacturer>Dell
Inc.</Manufacturer><Model>Latitude E6520</Model></SYSTEM><BIOS><Manufacturer>Dell Inc.</Manufacturer><Version>A18</Version><SMBIOSVersion major="2" minor="6"/><Date>20130628000000.000000+000</Date></BIOS><HWID>A05B3107018400FE</HWID><UserLCID>0809</UserLCID><SystemLCID>0409</SystemLCID><TimeZone>GMT
Standard Time(GMT+00:00)</TimeZone><iJoin>0</iJoin><SBID><stat>3</stat><msppid></msppid><name></name><model></model></SBID><OEM><OEMID>DELL </OEMID><OEMTableID>CBX3
</OEMTableID></OEM><GANotification/></MachineData><Software><Office><Result>109</Result><Products/><Applications/></Office></Software></GenuineResults>
Spsys.log Content: 0x80070002
Licensing Data-->
Software licensing service version: 6.1.7601.17514
Name: Windows(R) 7, Ultimate edition
Description: Windows Operating System - Windows(R) 7, OEM_SLP channel
Activation ID: 7cfd4696-69a9-4af7-af36-ff3d12b6b6c8
Application ID: 55c92734-d682-4d71-983e-d6ec3f16059f
Extended PID: 00426-00178-926-600400-02-2057-7601.0000-0452014
Installation ID: 015022194896715926564380852615762536846771772141316646
Processor Certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
Machine Certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
Use License URL: http://go.microsoft.com/fwlink/?LinkID=88341
Product Key Certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
Partial Product Key: P4K27
License Status: Initial grace period
Time remaining: 37860 minute(s) (26 day(s))
Remaining Windows rearm count: 3
Trusted time: 14/02/2014 09:02:26
Windows Activation Technologies-->
HrOffline: 0x00000000
HrOnline: 0x00000000
HealthStatus: 0x0000000000000000
Event Time Stamp: 2:14:2014 09:00
ActiveX: Registered, Version: 7.1.7600.16395
Admin Service: Registered, Version: 7.1.7600.16395
HealthStatus Bitmask Output:
HWID Data-->
HWID Hash Current: NAAAAAEAAQABAAIAAAACAAAABAABAAEAHKLYsxuJLAK4jqbIhjvuI1YXxgem9B73it4ucw==
OEM Activation 1.0 Data-->
N/A
OEM Activation 2.0 Data-->
BIOS valid for OA 2.0: yes
Windows marker version: 0x20001
OEMID and OEMTableID Consistent: yes
BIOS Information:
ACPI Table Name   OEMID Value   OEMTableID Value
APIC           DELL         CBX3
FACP           DELL         CBX3
HPET           A M I        PCHHPET
BOOT           DELL         CBX3
MCFG           DELL         SNDYBRDG
TCPA
SSDT           DELLTP       TPM
SSDT           DELLTP       TPM
SSDT           DELLTP       TPM
DMAR           INTEL        SNB
SLIC           DELL         CBX3
SSDT           DELLTP       TPM

Hi,
The error code 0xC004E003 means that the Software Licensing Service reported that license evaluation failed.
We may need to involve the phone activation center and check if they can resolve the issue:
How to contact a Microsoft Product Activation Center by telephone
http://support.microsoft.com/kb/950929/
Meanwhile, you should post your question in the forum mentioned by Kamin of Ressik. They are the most knowledgeable about the topic.
Hope it helps.
Regards,
Blair Deng
Blair Deng
TechNet Community Support

Wiping out laptap and installing fresh Windows 7 Ultimate

I want to do this:
Wipe out my Lenovo Thinkpad X220 HDD and install a fresh operating system, so please provide me with step by step process and what are the things to do before wiping out my laptap.
What I have:
1. 4GB usb with Windows 7 installer
2. My laptap have 1 hdd, partitioned into two
a. 97.9 GB ( where my OS is installed)
b. 200 GB (where my personal files is stored)
How to wipe out my laptap, delete partiton and delete all data and instal fresh OS, Bios etc.?
Thank you.
Solved!
Go to Solution.

Hello,
In that case, what you want to do is run a program which sends an ATA SECURE ERASE command to the hard disk drive, which tells the embedded controller in the drive to basically purge the contents of the drive. When it's finished running, there will be no information left on the disk.
If you are comfortable with Linux, this can be done by running the HDParm command. The Center for Magnetic Recording Research at UC San Diego has released a Secure Erase program which can be run from DOS. There's also the Parted Magic Linux Live CD/USB, which creates a bootable CD/DVD/USB flash to boot from, but it's not free.
Another option would be to run Darik's Boot and Nuke (DBAN). This program does not perform an ATA SECURE ERASE command, but instead overwrites all of the areas on the disk so that no information will be retrievable. When finished, you will have a blank drive as well.
At that point, you can just boot off of your Windows 7 installation USB flash drive and load the operating system onto the now-empty hard disk drive inside the ThinkPad X220 as you normally would.
Regards,
Aryeh Goretsky
I am a volunteer and neither a Lenovo nor a Microsoft employee. • Dexter is a good dog • Dexter je dobrý pes
S230u (3347-4HU) • X220 (4286-CTO) • W510 (4318-CTO) • W530 (2441-4R3) • X100e (3508-CTO) • X120e (0596-CTO) • T61p (6459-CTO) • T43p (2678-H7U) • T42 (2378-R4U) • T23 (2648-LU7)
Deutsche Community Comunidad en Español Русскоязычное Сообщество

Installing RSTE after install of Windows 7 Ultimate

Similar Messages

Maybe you are looking for